Showing 1–20 of 20 results for author: Ruesing, M

Probing Ferroelectric Phase Transitions in Barium Titanate Single Crystals via $\it{in-situ}$ Second Harmonic Generation Microscopy

Authors: Benjamin Kirbus, Samuel D. Seddon, Iuliia Kiseleva, Elke Beyreuther, Michael Rüsing, Lukas M. Eng

Abstract: Ferroelectric materials play a crucial role in a broad range of technologies due to their unique properties that are deeply connected to the pattern and behavior of their ferroelectric (FE) domains. Chief among them, barium titanate (BaTiO$_3$; BTO) sees widespread applications such as in electronics but equally is a ferroelectric model system for fundamental research, e.g., to study the interplay… ▽ More Ferroelectric materials play a crucial role in a broad range of technologies due to their unique properties that are deeply connected to the pattern and behavior of their ferroelectric (FE) domains. Chief among them, barium titanate (BaTiO$_3$; BTO) sees widespread applications such as in electronics but equally is a ferroelectric model system for fundamental research, e.g., to study the interplay of such FE domains, the domain walls (DWs), and their macroscopic properties, owed to BTO's multiple and experimentally accessible phase transitions. Here, we employ Second Harmonic Generation Microscopy (SHGM) to $\it{in-situ}$ investigate the cubic-to-tetragonal (at $\sim$126$^\circ$C) and the tetragonal-to-orthorhombic (at $\sim$5$^\circ$C) phase transition in single-crystalline BTO via 3-dimensional (3D) DW map**. We demonstrate that SHGM imaging provides the direct visualization of FE domain switching as well as the domain dynamics in 3D, shedding light on the interplay of the domain structure and the phase transition. These results allow us to extract the different transition temperatures locally, to unveil the hysteresis behavior, and to determine the type of phase transition at play (1st/2nd order) from the recorded SHGM data. The capabilities of SHGM in uncovering these crucial phenomena can easily be applied to other ferroelectrics to provide new possibilities for $\it{in-situ}$ engineering of advanced ferroic devices. △ Less

Submitted 8 June, 2024; originally announced June 2024.

Comments: 8 pages, 3 figures, with appended supplementary material (2 pages, 2 figures)

Towards the reproducible fabrication of conductive ferroelectric domain walls into lithium niobate bulk single crystals

Authors: Julius Ratzenberger, Iuliia Kiseleva, Boris Koppitz, Elke Beyreuther, Manuel Zahn, Joshua Gössel, Peter A. Hegarty, Zeeshan H. Amber, Michael Rüsing, Lukas M. Eng

Abstract: Ferroelectric domain walls (DWs) are promising structures for assembling future nano-electronic circuit elements on a larger scale, since reporting domain wall currents of up to 1 mA per single DW. One key requirement hereto is their reproducible manufacturing by gaining preparative control over domain size and domain wall conductivity (DWC). To date, most works on DWC have focused on exploring th… ▽ More Ferroelectric domain walls (DWs) are promising structures for assembling future nano-electronic circuit elements on a larger scale, since reporting domain wall currents of up to 1 mA per single DW. One key requirement hereto is their reproducible manufacturing by gaining preparative control over domain size and domain wall conductivity (DWC). To date, most works on DWC have focused on exploring the fundamental electrical properties of individual DWs within single shot experiments, with emphasis on quantifying the origins for DWC. Very few reports exist when it comes to compare the DWC properties between two separate DWs, and literally nothing exists where issues of reproducibility in DWC devices have been addressed. To fill this gap while facing the challenge of finding guidelines achieving predictable DWC performance, we report on a procedure that allows us to reproducibly prepare single hexagonal domains of a predefined diameter into uniaxial ferroelectric (FE) lithium niobate (LN) single crystals of 200 and 300 micrometers thickness, respectively. We show that the domain diameter can be controlled with an error of a few percent. As-grown DWs are then subjected to a standard procedure of current-controlled high-voltage DWC enhancement, repetitively reaching a DWC increase of 6 orders of magnitude. While all resulting DWs show significantly enhanced DWC values, subtle features in their individual current-voltage (I-V) characteristics hint towards different 3D shapes into the bulk, with variations probably reflecting local heterogeneities by defects, DW pinning, and surface-near DW inclination, which seem to have a larger impact than expected. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 12 pages, 7 figures, with appended supplement (9 pages, 7 figures)

High-temperature domain wall current in Mg-doped lithium niobate single crystals up to 400°C

Authors: Uliana Yakhnevych, Marlo Kunzner, Leonard M. Verhoff, Julius Ratzenberger, Elke Beyreuther, Michael Rüsing, Simone Sanna, Lukas M. Eng, Holger Fritze

Abstract: Conductive ferroelectric domain walls (DWs) represent a promising topical system for the development of nanoelectronic components and devices. DWs show very different properties as compared to their bulk counterparts. Of central interest here is the domain wall current (DWC) of charged DWs in 5mol\% Mg-doped lithium niobate single crystals; in contrast to former works, we extend the DWC study here… ▽ More Conductive ferroelectric domain walls (DWs) represent a promising topical system for the development of nanoelectronic components and devices. DWs show very different properties as compared to their bulk counterparts. Of central interest here is the domain wall current (DWC) of charged DWs in 5mol\% Mg-doped lithium niobate single crystals; in contrast to former works, we extend the DWC study here to temperatures as high as 400$^\circ$C. Both the temporal stability and the thermal activation energies of 90 - 160 meV are readily deduced from current-voltage sweeps as recorded over multiple heating cycles. Our experimental work is backed up by atomistic modelling of the DWC. The latter suggests that a large band bending renders head-to-head and tail-to-tail DWs semimetallic. These detailed investigations underline the potential to extend DWC-based nanoelectronic applications even into the so-far unexplored high-temperature regime. △ Less

Submitted 15 April, 2024; v1 submitted 1 April, 2024; originally announced April 2024.

Comments: 5 pages, 4 figures; with included supplementary material (6 pages, 9 figures)

Lattice dynamics of LiNb$_{\text{1-x}}$Ta$_{\text{x}}$O$_{\text{3}}$ solid solutions: Theory and experiment

Authors: Felix Bernhardt, Soham Gharat, Alexander Kapp, Florian Pfeiffer, Robin Buschbeck, Franz Hempel, Oleksiy Pashkin, Susanne C. Kehr, Michael Rüsing, Simone Sanna, Lukas M. Eng

Abstract: Lithium niobate (LNO) and lithium tantalate (LTO) see widespread use in fundamental research and commercial technologies reaching from electronics over classical optics to integrated quantum communication. In recent years, the mixed crystal system lithium niobate tantalate (LNT) allows for the dedicate engineering of material properties by combining the advantages of the two parental materials LNO… ▽ More Lithium niobate (LNO) and lithium tantalate (LTO) see widespread use in fundamental research and commercial technologies reaching from electronics over classical optics to integrated quantum communication. In recent years, the mixed crystal system lithium niobate tantalate (LNT) allows for the dedicate engineering of material properties by combining the advantages of the two parental materials LNO and LTO. Vibrational spectroscopies such as Raman spectroscopy or (Fourier transform) infrared spectroscopy are vital techniques to provide detailed insight into the material properties, which is central to the analysis and optimization of devices. In this work, we present a joint experimental-theoretical approach allowing to unambiguously assign the spectral features in the LNT material family through both Raman and IR spectroscopy, as well as to provide an in-depth explanation for the observed scattering efficiencies based on first-principles calculations. The phononic contribution to the static dielectric tensor is calculated from the experimental and theoretical data using the generalized Lyddane-Sachs-Teller relation and compared with the results of the first-principles calculations. The joint methodology can be readily expanded to other materials and serves, e.g., as the basis for studying the role of point defects or do**. △ Less

Submitted 26 March, 2024; originally announced March 2024.

Evaluation and thermodynamic optimization of phase diagram of lithium niobate tantalate solid solutions

Authors: Umar Bashir, Detlef Klimm, Michael Rusing, Matthias Bickermann, Steffen Ganschow

Abstract: The phase diagram of the lithium niobate and lithium tantalate solid solutions was investigated using experimental data from differential thermal analysis (DTA) and crystal growth. We used XRF analysis to determine the elemental composition of crystals. Based on the Neumann-Kopp rule, essential data of end members lithium niobate (LN) and lithium tantalate (LT) was created. The heats of fusion of… ▽ More The phase diagram of the lithium niobate and lithium tantalate solid solutions was investigated using experimental data from differential thermal analysis (DTA) and crystal growth. We used XRF analysis to determine the elemental composition of crystals. Based on the Neumann-Kopp rule, essential data of end members lithium niobate (LN) and lithium tantalate (LT) was created. The heats of fusion of end members given by DTA measurements of LN (103 kJ/mol at 1531 K) and LT (289 kJ/mol at 1913 K) were given as input parameters to generate the data. This data served as the basis for calculating a phase diagram for LN and LT solid solutions. Finally, based on the experimental data and thermodynamic solution model, the phase diagram was optimized in the Calphad Factsage module. We also generated thermodynamic parameters for Gibb's excess energy of the solid solution. A plot of segregation coefficient as a function of Ta concentration was derived from the phase diagram. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Surface-near domain engineering in multi-domain x-cut lithium niobate tantalate mixed crystals

Authors: Laura Bollmers, Tobias Babai-Hemati, Boris Koppitz, Christof Eigner, Laura Padberg, Michael Ruesing, Lukas M. Eng, Christine Silberhorn

Abstract: Lithium niobate and lithium tantalate are among the most widespread materials for nonlinear, integrated photonics. Mixed crystals with arbitrary Nb-Ta ratios provide a new degree of freedom to tune materials properties, such as the birefringence, but also leverage the advantages of the singular compounds, for example, by combining the thermal stability of lithium tantalate with the larger nonlinea… ▽ More Lithium niobate and lithium tantalate are among the most widespread materials for nonlinear, integrated photonics. Mixed crystals with arbitrary Nb-Ta ratios provide a new degree of freedom to tune materials properties, such as the birefringence, but also leverage the advantages of the singular compounds, for example, by combining the thermal stability of lithium tantalate with the larger nonlinear or piezoelectric constants of lithium niobate. Periodic poling is the prerequisite for any nonlinear optical application. For mixed crystals this has been challenging so far due to the lack of homogeneous, mono-domain crystals, which severely inhibit domain growth and nucleation. In this work we demonstrate that surface-near ($< 1$~$μ$m depth) periodic poling on x-cut lithium niobate tantalate mixed crystals can be achieved via electric field poling and lithographically structured electrodes. We find that naturally occurring head-to-head or tail-to-tail domain walls in the as-grown crystal inhibit domain inversion at a larger scale. However, periodic poling is possible, if the gap size between the poling electrodes is of the same order of magnitude or smaller than the average size of naturally occurring domains. This work provides the basis for the nonlinear optical application of lithium niobate tantalate mixed crystals. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Depth resolution in piezoresponse force microscopy

Authors: Matthias Roeper, Samuel Dominic Seddon, Zeeshan H. Amber, Michael Rüsing, Lukas M. Eng

Abstract: Piezoresponse Force Microscopy (PFM) is one of the most widespread methods for investigating and visualizing ferroelectric domain structures down to the nanometer length scale. PFM makes use of the direct coupling of the piezoelectric response to the crystal lattice, and hence is most often applied to spatially map the 3-dimensional (3D) near-surface domain distribution of any polar or ferroic sam… ▽ More Piezoresponse Force Microscopy (PFM) is one of the most widespread methods for investigating and visualizing ferroelectric domain structures down to the nanometer length scale. PFM makes use of the direct coupling of the piezoelectric response to the crystal lattice, and hence is most often applied to spatially map the 3-dimensional (3D) near-surface domain distribution of any polar or ferroic sample. Nonetheless, since most samples investigated by PFM are at least semiconducting or fully insulating, the electric ac field emerging from the conductive scanning force microscopy (SFM) tip, penetrates the sample, and hence may also couple to polar features that are deeply buried into the bulk of the sample under investigation. Thus, in the work presented here, we experimentally and theoretically explore the contrast and depth resolution capabilities of PFM, by analyzing the dependence of several key parameters. These key parameters include the depth of the buried feature, i.e. here a domain wall (DW), as well as PFM-relevant technical parameters such as the tip radius, the PFM drive voltage and frequency, and the signal-to-noise ratio. The theoretical predictions are experimentally verified using x-cut periodically-poled lithium niobate single crystals that are specially prepared into wedge-shaped samples, in order to allow the buried feature, here the DW, to be `positioned' at any depth into the bulk. This inspection essentially contributes to the fundamental understanding in PFM contrast analysis, and to the reconstruction of 3D domain structures down to a 1-$μ$m-penetration depth into the sample. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comparative study of photo-induced electronic transport along ferroelectric domain walls in lithium niobate single crystals

Authors: Lili Ding, Elke Beyreuther, Boris Koppitz, Konrad Kempf, Jianhua Ren, Wei** Chen, Michael Rüsing, Yue Zheng, Lukas M. Eng

Abstract: Ferroelectric domain wall conductivity (DWC) is an intriguing functional property, that can be controlled through external stimuli such as electric and mechanical fields. Optical-field control, as a non-invasive flexible handle, has rarely been applied so far, but significantly expands the possibility for both tuning and probing DWC. On the one hand, as known from Second-Harmonic, Raman, and CARS… ▽ More Ferroelectric domain wall conductivity (DWC) is an intriguing functional property, that can be controlled through external stimuli such as electric and mechanical fields. Optical-field control, as a non-invasive flexible handle, has rarely been applied so far, but significantly expands the possibility for both tuning and probing DWC. On the one hand, as known from Second-Harmonic, Raman, and CARS micro-spectroscopy, the optical in-and-out approach delivers parameters on the DW distribution, the DW inclination, and probes the DW vibrational modes; on the other hand, photons might be applied also to directly generate charge carriers within the DW, hence acting as a functional and spectrally tunable probe to deduce the integral or local absorption properties and bandgaps of conductive DWs. Here, we report on such an optoelectronic approach by investigating the photo-induced DWC (PI-DWC) in DWs of the model system lithium niobate, a material that is well known for hosting conductive DWs. We compare three different crystals containing different numbers of domain walls: (A) none, (B) one, and (C) many conductive DWs. All samples are inspected for their current-voltage (I-V) behavior (i) in darkness, and (ii) for different illumination wavelengths swept from 500 nm down to 310 nm. All samples show their maximum PI-DWC at 310 nm, i.e., at the optical bandgap of lithium niobate; moreover, sample (C) reaches PI-DWCs of several $μ$A. Interestingly, a noticeable PI-DWC is also observed for sub-bandgap illumination, i.e., wavelengths as high as 500 nm, hinting towards the existence and decisive role of electronic in-gap states that contribute to the electronic transport along DWs. Finally, conductive atomic force microscopy (c-AFM) investigations under illumination proved that the PI-DWC is confined to the DW area, and does not originate from photo-induced bulk conductivity. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Comments: 18 pages, 3 figures, and Supplementary Material (with 10 pages, 4 figures)

Journal ref: Applied Physics Letters 124(25), 252901 (2024)

Hall mobilities and sheet carrier densities in a single LiNbO$_3$ conductive ferroelectric domain wall

Authors: Henrik Beccard, Elke Beyreuther, Benjamin Kirbus, Samuel D. Seddon, Michael Rüsing, Lukas M. Eng

Abstract: For the last decade, conductive domain walls (CDWs) in single crystals of the uniaxial model ferroelectric lithium niobate (LiNbO$_3$, LNO) have shown to reach resistances more than 10 orders of magnitude lower as compared to the surrounding bulk, with charge carriers being firmly confined to sheets of a few nanometers in width. LNO thus currently witnesses an increased attention since bearing the… ▽ More For the last decade, conductive domain walls (CDWs) in single crystals of the uniaxial model ferroelectric lithium niobate (LiNbO$_3$, LNO) have shown to reach resistances more than 10 orders of magnitude lower as compared to the surrounding bulk, with charge carriers being firmly confined to sheets of a few nanometers in width. LNO thus currently witnesses an increased attention since bearing the potential for variably designing room-temperature nanoelectronic circuits and devices based on such CDWs. In this context, the reliable determination of the fundamental transport parameters of LNO CDWs, in particular the 2D charge carrier density $n_{2D}$ and the Hall mobility $μ_{H}$ of the majority carriers, are of highest interest. In this contribution, we present and apply a robust and easy-to-prepare Hall-effect measurement setup by adapting the standard 4-probe van-der-Pauw method to contact a single, hexagonally-shaped domain wall that fully penetrates the 200-$μ$m-thick LNO bulk single crystal. We then determine $n_{2D}$ and $μ_{H}$ for a set of external magnetic fields $B$ and prove the expected cosine-like angular dependence of the Hall voltage. Lastly, we present photo-Hall measurements of one and the same DW, by determining the impact of super-bandgap illumination on the 2D charge carrier density $n_{2D}$. △ Less

Submitted 6 November, 2023; v1 submitted 31 July, 2023; originally announced August 2023.

Journal ref: Physical Review Applied 20(6), 064043 (2023)

R2D2 -- An equivalent-circuit model that quantitatively describes domain wall conductivity in ferroelectric LiNbO$_3$

Authors: Manuel Zahn, Elke Beyreuther, Iuliia Kiseleva, Ahmed Samir Lotfy, Conor J. McCluskey, Jesi R. Maguire, Ahmet Suna, Michael Rüsing, J. Marty Gregg, Lukas M. Eng

Abstract: Ferroelectric domain wall (DW) conductivity (DWC) can be attributed to two separate mechanisms: (a) the injection/ejection of charge carriers across the Schottky barrier formed at the (metal-) electrode-DW junction and (b) the transport of those charge carriers along the DW. Current-voltage (IU) characteristics, recorded at variable temperatures from LiNbO$_3$ (LNO) DWs, are clearly able to differ… ▽ More Ferroelectric domain wall (DW) conductivity (DWC) can be attributed to two separate mechanisms: (a) the injection/ejection of charge carriers across the Schottky barrier formed at the (metal-) electrode-DW junction and (b) the transport of those charge carriers along the DW. Current-voltage (IU) characteristics, recorded at variable temperatures from LiNbO$_3$ (LNO) DWs, are clearly able to differentiate between these two contributions. Practically, they allow us here to directly quantify the physical parameters relevant for the two mechanisms (a) and (b) mentioned above. These are, e.g., the resistance of the DW, the saturation current, the ideality factor, and the Schottky barrier height of the electrode/DW junction. Furthermore, the activation energies needed to initiate the thermally-activated electronic transport along the DWs, can be extracted. In addition, we show that electronic transport along LiNbO$_3$ DWs can be elegantly viewed and interpreted in an adapted semiconductor picture based on a double-diode/double-resistor equivalent circuit model, the R2D2 model. Finally, our R2D2 model was checked for its universality by fitting the DWC data not only to z-cut LNO bulk DWs, but equally to z-cut thin-film LNO DWs, and DWC from x-cut DWs as reported in literature. △ Less

Submitted 19 November, 2023; v1 submitted 19 July, 2023; originally announced July 2023.

Comments: 10 pages, 7 figures; with included supporting information (6 pages, 4 figures)

Journal ref: Physical Review Applied 21(2), 024007 (2024)

Comparing Transmission- and Epi-BCARS: A Transnational Round Robin on Solid State Materials

Authors: Franz Hempel, Federico Vernuccio, Lukas König, Robin Buschbeck, Michael Rüsing, Giulio Cerullo, Dario Polli, Lukas M. Eng

Abstract: Broadband coherent anti-Stokes Raman scattering (BCARS) is an advanced Raman spectroscopy method that combines the spectral sensitivity of spontaneous Raman scattering (SR) with the increased signal intensity of single-frequency coherent Raman techniques. These two features make BCARS particularly suitable for ultra-fast imaging of heterogeneous samples, as already shown in biomedicine. Recent stu… ▽ More Broadband coherent anti-Stokes Raman scattering (BCARS) is an advanced Raman spectroscopy method that combines the spectral sensitivity of spontaneous Raman scattering (SR) with the increased signal intensity of single-frequency coherent Raman techniques. These two features make BCARS particularly suitable for ultra-fast imaging of heterogeneous samples, as already shown in biomedicine. Recent studies demonstrated that BCARS also shows exceptional spectroscopic capabilities when inspecting crystalline materials like lithium niobate and lithium tantalate, and can be used for fast imaging of ferroelectric domain walls. These results strongly suggest the extension of BCARS towards new imaging applications like map** defects, strain, or dopant levels, similar to standard SR imaging. Despite these advantages, BCARS suffers from a spurious and chemically unspecific non-resonant background (NRB) that distorts and shifts the Raman peaks. Post-processing numerical algorithms are then used to remove the NRB and to obtain spectra comparable to SR results. Here, we show the reproducibility of BCARS by conducting an internal Round Robin with two different BCARS experimental setups, comparing the results on different crystalline materials of increasing structural complexity: diamond, 6H-SiC, KDP, and KTP. First, we compare the detected and phase-retrieved signals, the setup-specific NRB-removal steps, and the mode assignment. Subsequently, we demonstrate the versatility of BCARS by showcasing how the selection of pump wavelength, pulse width, and detection geometry can be tailored to suit the specific objectives of the experiment. Finally, we compare and optimize measurement parameters for the high-speed, hyperspectral imaging of ferroelectric domain walls in lithium niobate. △ Less

Submitted 6 September, 2023; v1 submitted 16 June, 2023; originally announced June 2023.

Comments: 12 pages, 8 figures

Modeling nonlinear optical interactions of focused beams in bulk crystals and thin films: A phenomenological approach

Authors: Kai J. Spychala, Zeeshan H. Amber, Lukas M. Eng, Michael Rüsing

Abstract: Coherent nonlinear optical micro-spectroscopy is a frequently used tool in modern material science, as it is sensitive to many different local observables, which comprise, among others, crystal symmetry and vibrational properties. The richness in information, however, may come with challenges in data interpretation, as one has to disentangle the many different effects like multiple reflections, ph… ▽ More Coherent nonlinear optical micro-spectroscopy is a frequently used tool in modern material science, as it is sensitive to many different local observables, which comprise, among others, crystal symmetry and vibrational properties. The richness in information, however, may come with challenges in data interpretation, as one has to disentangle the many different effects like multiple reflections, phase jumps at interfaces, or the influence of the Guoy-phase. In order to facilitate interpretation, the work presented here proposes an easy-to-use semi-analytical modeling ansatz, that bases upon known analytical solutions using Gaussian beams. Specifically, we apply this ansatz to compute nonlinear optical responses of (thin film) optical materials. We try to conserve the meaning of intuitive parameters like the Gouy-phase and the nonlinear coherent interaction length. In particular, the concept of coherence length is extended, which is a must when using focal beams. The model is subsequently applied to exemplary cases of second-harmonic and third-harmonic generation. We observe a very good agreement with experimental data and furthermore, despite the constraints and limits of the analytical ansatz, our model performs similarly well as when using more rigorous simulations. However, it outperforms the latter in terms of computational power, requiring more than three orders less computational time and less performant computer systems. △ Less

Submitted 20 November, 2022; v1 submitted 15 November, 2022; originally announced November 2022.

Vibrational properties of LiNbO$_3$ and LiTaO$_3$ under uniaxial stress

Authors: Ekta Singh, Mike N. Pionteck, Sven Reitzig, Michael Lange, Michael Rüsing, Lukas M. Eng, Simone Sanna

Abstract: Structural strain severely impacts material properties such as the linear and non-linear optical response. Moreover, strain plays a key role, e.g., in the physics of ferroelectrics and in particular of their domain walls. $μ$-Raman spectroscopy is a well-suited technique for the investigation of such strain effects, as it allows to measure the lattice dynamics locally. However, quantifying and rec… ▽ More Structural strain severely impacts material properties such as the linear and non-linear optical response. Moreover, strain plays a key role, e.g., in the physics of ferroelectrics and in particular of their domain walls. $μ$-Raman spectroscopy is a well-suited technique for the investigation of such strain effects, as it allows to measure the lattice dynamics locally. However, quantifying and reconstructing strain fields from Raman maps requires knowledge on the strain dependence of phonon frequencies. In this work, we have analyzed both theoretically and experimentally the phonon frequencies in the widely used ferroelectrics lithium niobate and lithium tantalate as a function of uniaxial strain via density functional theory and $μ$-Raman spectroscopy. Overall, we find a good agreement between our $ab$ $initio$ models and the experimental data performed with a stress cell. The majority of phonons show an increase in frequency under compressive strain, while the opposite is observed for tensile strains. Moreover, for E-type phonons, we observe the lifting of degeneracy already at moderate strain fields (i.e. at $\pm0.2~\%$) along the x and y directions. This work hence allows for the systematic analysis of 3D strains in modern-type bulk and thin-film devices assembled from lithium niobate and tantalate. △ Less

Submitted 25 October, 2022; originally announced October 2022.

Comments: 12 pages, 7 figures, Supplementary Information, submitted to Physical Review Materials

Impact of 3D curvature on the polarization orientation in non-Ising domain walls

Authors: Ulises Acevedo-Salas, Boris Croes, Yide Zhang, Olivier Cregut, Kokou Dodzi Dorkenoo, Benjamin Kirbus, Ekta Singh, Henrik Beccard, Michael Rüsing, Lukas M. Eng, Riccardo Hertel, Eugene A. Eliseev, Anna N. Morozovska, Salia Cherifi-Hertel

Abstract: Ferroelectric domain boundaries are quasi-two-dimensional functional interfaces with high prospects for nanoelectronic applications. Despite their reduced dimensionality, they can exhibit complex non-Ising polarization configurations and unexpected physical properties. Here, the impact of the three-dimensional (3D) curvature on the polarization profile of nominally uncharged 180° domain walls in L… ▽ More Ferroelectric domain boundaries are quasi-two-dimensional functional interfaces with high prospects for nanoelectronic applications. Despite their reduced dimensionality, they can exhibit complex non-Ising polarization configurations and unexpected physical properties. Here, the impact of the three-dimensional (3D) curvature on the polarization profile of nominally uncharged 180° domain walls in LiNbO3 is studied using second-harmonic generation microscopy and 3D polarimetry analysis. Correlations between the domain wall curvature and the variation of its internal polarization unfold in the form of modulations of the Néel-like character, which we attribute to the flexoelectric effect. While the Néel-like character originates mainly from the tilting of the domain wall, the internal polarization adjusts its orientation due to the synergetic upshot of dipolar and monopolar bound charges and their variation with the 3D curvature. Our results show that curved interfaces in solid crystals may offer a rich playground for tailoring nanoscale polar states. △ Less

Submitted 4 July, 2022; originally announced July 2022.

Comments: 35 pages, 4 figures and Supporting Information

Tuning the domain wall conductivity in bulk lithium niobate by uniaxial stress

Authors: Ekta Singh, Henrik Beccard, Zeeshan H. Amber, Julius Ratzenberger, Clifford W. Hicks, Michael Rüsing, Lukas M. Eng

Abstract: Conductive domain walls (CDWs) in insulating ferroelectrics have recently attracted considerable attention due to their unique topological, optical, and electronic properties, and offer potential applications such as in memory devices or re-writable circuitry. The electronic properties of domain walls (DWs) can be tuned by the application of strain, hence controlling the charge carrier density at… ▽ More Conductive domain walls (CDWs) in insulating ferroelectrics have recently attracted considerable attention due to their unique topological, optical, and electronic properties, and offer potential applications such as in memory devices or re-writable circuitry. The electronic properties of domain walls (DWs) can be tuned by the application of strain, hence controlling the charge carrier density at DWs. In this work, we study the influence of uniaxial stress on the conductivity of DWs in the bulk single crystal lithium niobate (LiNbO$_3$). Using conductive atomic force microscopy (cAFM), we observe a large asymmetry in the conductivity of DWs, where only negatively screened walls, so called head-to-head DWs, are becoming increasingly conductive, while positively screened, tail-to-tails DWs, show a decrease in conductivity. This asymmetry of DW conductivity agrees with our theoretical model based on the piezoelectric effect. In addition, we observed that the current in the DW increases up to an order of magnitude for smaller compressive stresses of 100 MPa. This response of DWs remained intact for multiple stress cycles over 2 months, opening a path for future applications. △ Less

Submitted 4 May, 2022; v1 submitted 2 May, 2022; originally announced May 2022.

Large Hall electron mobilities in head-to-head BaTiO$_3$-domain walls

Authors: Henrik Beccard, Benjamin Kirbus, Elke Beyreuther, Michael Rüsing, Petr Bednyakov, Jirka Hlinka, Lukas M. Eng

Abstract: Strongly charged head-to-head (H2H) domain walls (DWs) that are purposely engineered along the [110] crystallographic orientation into ferroelectric BaTiO$_3$ single crystals have been proposed as novel 2-dimensional electron gases (2DEGs) due to their significant domain wall conductivity (DWC). Here, we quantify these 2DEG properties through dedicated Hall-transport measurements in van-der-Pauw 4… ▽ More Strongly charged head-to-head (H2H) domain walls (DWs) that are purposely engineered along the [110] crystallographic orientation into ferroelectric BaTiO$_3$ single crystals have been proposed as novel 2-dimensional electron gases (2DEGs) due to their significant domain wall conductivity (DWC). Here, we quantify these 2DEG properties through dedicated Hall-transport measurements in van-der-Pauw 4-point geometry at room temperature, finding the electron mobility to reach around 400~cm$^2$(Vs)$^{-1}$, while the 2-dimensional charge density amounts to ~7$\times$10$^3$cm$^{-2}$. We underline the necessity to take account of thermal and geometrical-misalignment offset voltages by evaluating the Hall resistance under magnetic-field sweeps, since otherwise dramatic errors of several hundred percent in the derived mobility and charge density values can occur. Apart from the specific characterization of the conducting BaTiO$_3$ DW, we propose the method as an easy and fast way to quantitatively characterize ferroic conducting DWs, complementary to previously proposed scanning-probe-based Hall-potential analyses. △ Less

Submitted 24 April, 2022; originally announced April 2022.

Comments: 8 pages, 4 figures; with included supporting information (4 pages, 5 figures)

Journal ref: ACS Applied Nano Materials 5(7), 8717-8722 (2022)

Quantifying the Coherent Interaction Length of Second-Harmonic Microscopy in Lithium Niobate Confined Nanostructures

Authors: Zeeshan Hussain Amber, Benjamin Kirbus, Lukas M. Eng, Michael Rüsing

Abstract: Thin-film lithium niobate (TFLN) in the form of x- or z-cut lithium-niobate-on-insulator (LNOI) has recently popped up as a very promising and novel platform for develo** integrated optoelectronic (nano)devices and exploring fundamental research. Here, we investigate the coherent interaction length $l_{c}$ of optical second-harmonic (SH) microscopy in such samples, that are purposely prepared in… ▽ More Thin-film lithium niobate (TFLN) in the form of x- or z-cut lithium-niobate-on-insulator (LNOI) has recently popped up as a very promising and novel platform for develo** integrated optoelectronic (nano)devices and exploring fundamental research. Here, we investigate the coherent interaction length $l_{c}$ of optical second-harmonic (SH) microscopy in such samples, that are purposely prepared into a wedge shape, in order to elegantly tune the geometrical confinement from bulk thicknesses down to $\approx$ 50 nm. SH microscopy is a very powerful and non-invasive tool for the investigation of structural properties in the biological and solid-state sciences, especially also for visualizing and analyzing ferroelectric domains and domain walls. However, unlike bulk LN, SH microscopy in TFLN is largely affected by interfacial reflections and resonant enhancement that both rely on film thickness and substrate material. In this paper we show that the dominant SHG contribution measured in back-reflection, is the co-propagating phase-matched SH signal and \textit{not} the counter-propagating SH portion as is the case for bulk LN samples. Moreover, $l_{c}$ dramatically depends also on the incident pump laser wavelength (sample dispersion) but even more on the numerical aperture of the focussing objective in use. These experimental findings on x- and z-cut TFLN are excellently backed up by our advanced numerical simulations. △ Less

Submitted 19 August, 2021; v1 submitted 7 August, 2021; originally announced August 2021.

Evidence of nonlinear diffusion in KTP waveguides

Authors: Laura Padberg, Matteo Santandrea, Michael Rüsing, Julian Brockmeier, Peter Mackwitz, Gerhard Berth, Artur Zrenner, Christof Eigner, Christine Silberhorn

Abstract: Integrated $χ^{(2)}$ devices are a widespread tool for the generation and manipulation of light fields, since they exhibit high efficiency, small footprint and the ability to interface them with fibre networks. Surprisingly many things are not fully understood until now, in particular the fabrication of structures in potassium titanyl phosphate (KTP). A thorough understanding of the fabrication pr… ▽ More Integrated $χ^{(2)}$ devices are a widespread tool for the generation and manipulation of light fields, since they exhibit high efficiency, small footprint and the ability to interface them with fibre networks. Surprisingly many things are not fully understood until now, in particular the fabrication of structures in potassium titanyl phosphate (KTP). A thorough understanding of the fabrication process and analysis of spatial properties is crucial for the realization and the engineering of high efficiency devices for quantum applications. In this paper we present our studies on rubidium-exchanged waveguides fabricated in KTP. Employing energy dispersive X-ray spectroscopy (EDX), we analysed a set of waveguides fabricated with different production parameters in terms of time and temperature. We find that the waveguide depth is dependent on their widths by reconstructing the waveguide depth profiles. Narrower waveguides are deeper, contrary to the theoretical model usually employed. Moreover, we found that the variation of the penetration depth with the waveguide width is stronger at higher temperatures and times. We attribute this behaviour to stress-induced variation in the diffusion process. △ Less

Submitted 19 May, 2020; originally announced June 2020.

Comments: 8 pages, 4 figures

Entangled photon-pair generation in periodically-poled thin-film lithium niobate waveguides

Authors: Jie Zhao, Chaoxuan Ma, Michael Rüsing, Shayan Mookherjea

Abstract: We report measurements of time-frequency entangled photon pairs and heralded single photons at telecommunications wavelengths, generated using a periodically-poled, lithium niobate on insulator (LNOI) waveguide pumped optically by a diode laser. We achieve a high Coincidences-to-Accidentals Ratio (CAR) at high pair brightness, a low value of the conditional self-correlation function [$g^{(2)}$(0)]… ▽ More We report measurements of time-frequency entangled photon pairs and heralded single photons at telecommunications wavelengths, generated using a periodically-poled, lithium niobate on insulator (LNOI) waveguide pumped optically by a diode laser. We achieve a high Coincidences-to-Accidentals Ratio (CAR) at high pair brightness, a low value of the conditional self-correlation function [$g^{(2)}$(0)], and high two-photon energy-time Franson interferometric visibility, which demonstrate the high quality of the entangled photon pairs and heralded single photons. △ Less

Submitted 7 October, 2019; originally announced October 2019.

Second harmonic microscopy of poled x-cut thin film lithium niobate: Understanding the contrast mechanism

Authors: Michael Ruesing, Jie Zhao, Shayan Mookherjea

Abstract: Thin film lithium niobate is of great recent interest and an understanding of periodically poled thin-films is crucial for both fundamental physics and device developments. Second-harmonic (SH) microscopy allows for the non-invasive visualization and analysis of ferroelectric domain structures and walls. While the technique is well understood in bulk lithium niobate, SH microscopy in thin films is… ▽ More Thin film lithium niobate is of great recent interest and an understanding of periodically poled thin-films is crucial for both fundamental physics and device developments. Second-harmonic (SH) microscopy allows for the non-invasive visualization and analysis of ferroelectric domain structures and walls. While the technique is well understood in bulk lithium niobate, SH microscopy in thin films is largely influenced by interfacial reflections and resonant enhancements, which depend on film thicknesses and the substrate materials. We present a comprehensive analysis of SH microscopy in x-cut lithium niobate thin films, based on a full three dimensional focus calculations, and accounting for interface reflections. We show that the dominant signal in back-reflection originates from a co-propagating phase-matched process observed through reflections, rather than direct detection of the counter-propagating signal as in bulk samples. We can explain the observation of domain structures in the thin film geometry, and in particular, we show that the SH signal from thin poled films allows to unambiguously distinguish areas, which are completely or only partly inverted in depth. △ Less

Submitted 7 June, 2019; originally announced June 2019.