-
Granular dilatancy and non-local fluidity of partially molten rock
Authors:
Richard F. Katz,
John F. Rudge,
Lars N. Hansen
Abstract:
Partially molten rock is a densely packed, melt-saturated, granular medium, but it has seldom been considered in these terms. In this manuscript, we extend the continuum theory of partially molten rock to incorporate the physics of granular media. Our formulation includes dilatancy in a viscous constitutive law and introduces a non-local fluidity. We analyse the resulting poro-viscous--granular th…
▽ More
Partially molten rock is a densely packed, melt-saturated, granular medium, but it has seldom been considered in these terms. In this manuscript, we extend the continuum theory of partially molten rock to incorporate the physics of granular media. Our formulation includes dilatancy in a viscous constitutive law and introduces a non-local fluidity. We analyse the resulting poro-viscous--granular theory in terms of two modes of liquid--solid segregation that are observed in published torsion experiments: localisation of liquid into high-porosity sheets and radially inward liquid flow. We show that the newly incorporated granular physics brings the theory into agreement with experiments. We discuss these results in the context of grain-scale physics across the nominal jamming fraction at the high homologous temperatures relevant in geological systems.
△ Less
Submitted 27 November, 2023; v1 submitted 18 September, 2023;
originally announced September 2023.
-
A crystallographic approach to symmetry-breaking in fluid layers
Authors:
John F. Rudge,
Dan McKenzie
Abstract:
Symmetry-breaking bifurcations, where a flow state with a certain symmetry undergoes a transition to state with a different symmetry, are ubiquitous in fluid mechanics. Much can be understood about the nature of these transitions from symmetry alone, using the theory of groups and their representations. Here we show how the extensive databases on groups in crystallography can be exploited to yield…
▽ More
Symmetry-breaking bifurcations, where a flow state with a certain symmetry undergoes a transition to state with a different symmetry, are ubiquitous in fluid mechanics. Much can be understood about the nature of these transitions from symmetry alone, using the theory of groups and their representations. Here we show how the extensive databases on groups in crystallography can be exploited to yield insights into fluid-dynamical problems. In particular, we demonstrate the application of the crystallographic layer groups to problems in fluid layers, using thermal convection as an example. Crystallographic notation provides a concise and unambiguous description of the symmetries involved, and we advocate its broader use by the fluid dynamics community.
△ Less
Submitted 9 April, 2024; v1 submitted 11 September, 2023;
originally announced September 2023.
-
A mineralogical reason why all exoplanets cannot be equally oxidising
Authors:
Claire Marie Guimond,
Oliver Shorttle,
Sean Jordan,
John F. Rudge
Abstract:
From core to atmosphere, the oxidation states of elements in a planet shape its character. Oxygen fugacity (fO$_2$) is one parameter indicating these likely oxidation states. The ongoing search for atmospheres on rocky exoplanets benefits from understanding the plausible variety of their compositions, which depends strongly on their oxidation states -- and if derived from interior outgassing, on t…
▽ More
From core to atmosphere, the oxidation states of elements in a planet shape its character. Oxygen fugacity (fO$_2$) is one parameter indicating these likely oxidation states. The ongoing search for atmospheres on rocky exoplanets benefits from understanding the plausible variety of their compositions, which depends strongly on their oxidation states -- and if derived from interior outgassing, on the fO$_2$ at the top of their silicate mantles. This fO$_2$ must vary across compositionally-diverse exoplanets, but for a given planet its value is unconstrained insofar as it depends on how iron (the dominant multivalent element) is partitioned between its 2+ and 3+ oxidation states. Here we focus on another factor influencing how oxidising a mantle is -- a factor modulating fO$_2$ even at fixed Fe$^{3+}$/Fe$^{2+}$ -- the planet's mineralogy. Only certain minerals (e.g., pyroxenes) incorporate Fe$^{3+}$. Having such minerals in smaller mantle proportions concentrates Fe$^{3+}$, increasing fO$_2$. Mineral proportions change within planets according to pressure, and between planets according to bulk composition. Constrained by observed host star refractory abundances, we calculate a minimum fO$_2$ variability across exoplanet mantles, of at least two orders of magnitude, due to mineralogy alone. This variability is enough to alter by a hundredfold the mixing ratio of SO$_2$ directly outgassed from these mantles. We further predict that planets orbiting high-Mg/Si stars are more likely to outgas detectable amounts of SO$_2$ and H$_2$O; and for low-Mg/Si stars, detectable CH$_4$, all else equal. Even absent predictions of Fe$^{3+}$ budgets, general insights can be obtained into how oxidising an exoplanet's mantle is.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
Mantle mineralogy limits to rocky planet water inventories
Authors:
Claire Marie Guimond,
Oliver Shorttle,
John F. Rudge
Abstract:
Nominally anhydrous minerals in rocky planet mantles can sequester oceans of water as a whole, giving a constraint on bulk water inventories. Here we predict mantle water capacities from the thermodynamically-limited solubility of water in their constituent minerals. We report the variability of mantle water capacity due to (i) host star refractory element abundances that set mineralogy, (ii) real…
▽ More
Nominally anhydrous minerals in rocky planet mantles can sequester oceans of water as a whole, giving a constraint on bulk water inventories. Here we predict mantle water capacities from the thermodynamically-limited solubility of water in their constituent minerals. We report the variability of mantle water capacity due to (i) host star refractory element abundances that set mineralogy, (ii) realistic mantle temperature scenarios, and (iii) planet mass. We find that planets large enough to stabilise perovskite almost unfailingly have a dry lower mantle, topped by a high-water-capacity transition zone which may act as a bottleneck for water transport within the planet's interior. Because the pressure of the ringwoodite-perovskite phase boundary defining the lower mantle is roughly insensitive to planet mass, the relative contribution of the upper mantle reservoir will diminish with increasing planet mass. Large rocky planets therefore have disproportionately small mantle water capacities. In practice, our results would represent initial water concentration profiles in planetary mantles where their primordial magma oceans are water-saturated. We suggest that a considerable proportion of massive rocky planets' accreted water budgets would form surface oceans or atmospheric water vapour immediately after magma ocean solidification, possibly diminishing the likelihood of these planets hosting land. This work is a step towards understanding planetary deep water cycling, thermal evolution as mediated by rheology and melting, and the frequency of waterworlds.
△ Less
Submitted 11 January, 2023; v1 submitted 30 June, 2022;
originally announced July 2022.
-
A Re-examination of Ellipticity Corrections for Seismic Phases
Authors:
Stuart Russell,
John F. Rudge,
Jessica C. E. Irving,
Sanne Cottaar
Abstract:
The Earth's ellipticity of figure has an effect on the travel times of seismic waves over teleseismic distances. Tables of ellipticity corrections and coefficients have been used by seismologists for several decades, however due to the increasing variety and complexity of seismic phases in use, current tables of ellipticity coefficients are now outmoded and incomplete. We present a Python package,…
▽ More
The Earth's ellipticity of figure has an effect on the travel times of seismic waves over teleseismic distances. Tables of ellipticity corrections and coefficients have been used by seismologists for several decades, however due to the increasing variety and complexity of seismic phases in use, current tables of ellipticity coefficients are now outmoded and incomplete. We present a Python package, EllipticiPy, for the calculation of ellipticity corrections that removes the dependence on pre-calculated coefficients at discrete source depths and epicentral distances. EllipticiPy also facilitates the calculation of ellipticity corrections on other planetary bodies. When applied to both Earth and Mars, the magnitudes of ellipticity corrections are on the order of single seconds and are significant for some seismic studies on Earth but remain negligible on Mars due to other greater sources of uncertainty.
△ Less
Submitted 11 August, 2022; v1 submitted 17 May, 2022;
originally announced May 2022.
-
A micropolar continuum model of diffusion creep
Authors:
John F. Rudge
Abstract:
Solid polycrystalline materials undergoing diffusion creep are usually described by Cauchy continuum models with a Newtonian viscous rheology dependent on the grain size. Such a continuum lacks the rotational degrees of freedom needed to describe grain rotation. Here we provide a more general continuum description of diffusion creep that includes grain rotation, and identifies the deformation of t…
▽ More
Solid polycrystalline materials undergoing diffusion creep are usually described by Cauchy continuum models with a Newtonian viscous rheology dependent on the grain size. Such a continuum lacks the rotational degrees of freedom needed to describe grain rotation. Here we provide a more general continuum description of diffusion creep that includes grain rotation, and identifies the deformation of the material with that of a micropolar (Cosserat) fluid. We derive expressions for the micropolar constitutive tensors by a homogenisation of the physics describing a discrete collection of rigid grains, demanding an equivalent dissipation between the discrete and continuum descriptions. General constitutive laws are derived for both Coble (grain-boundary diffusion) and Nabarro-Herring (volume diffusion) creep. Detailed calculations are performed for a two-dimensional tiling of irregular hexagonal grains, which illustrates a potential coupling between the rotational and translational degrees of freedom. If only the plating out or removal of material at grain boundaries is considered, the constitutive laws are degenerate: modes of deformation that involve pure tangential motion at the grain boundaries are not resisted. This degeneracy can be removed by including the resistance to grain-boundary sliding, or by imposing additional constraints on the deformation.
△ Less
Submitted 31 May, 2021; v1 submitted 26 March, 2021;
originally announced March 2021.
-
Gravity, topography, and melt generation rates from simple 3D models of mantle convection
Authors:
Matthew E. Lees,
John F. Rudge,
Dan McKenzie
Abstract:
Convection in fluid layers at high Rayleigh number (Ra $\sim 10^6$) have a spoke pattern planform. Instabilities in the bottom thermal boundary layer develop into hot rising sheets of fluid, with a component of radial flow towards a central upwelling plume. The sheets form the "spokes" of the pattern, and the plumes the "hubs". Such a pattern of flow is expected to occur beneath plate interiors on…
▽ More
Convection in fluid layers at high Rayleigh number (Ra $\sim 10^6$) have a spoke pattern planform. Instabilities in the bottom thermal boundary layer develop into hot rising sheets of fluid, with a component of radial flow towards a central upwelling plume. The sheets form the "spokes" of the pattern, and the plumes the "hubs". Such a pattern of flow is expected to occur beneath plate interiors on Earth, but it remains a challenge to use observations to place constraints on the convective planform of the mantle. Here we present predictions of key surface observables (gravity, topography, and rates of melt generation) from simple 3D numerical models of convection in a fluid layer. These models demonstrate that gravity and topography have only limited sensitivity to the spokes, and mostly reflect the hubs (the rising and sinking plumes). By contrast, patterns of melt generation are more sensitive to short wavelength features in the flow. There is the potential to have melt generation along the spokes, but at a rate which is relatively small compared with that at the hubs. Such melting of spokes can only occur when the lithosphere is sufficiently thin ($\lesssim 80$ km) and mantle water contents are sufficiently high ($\gtrsim 100$ ppm). The distribution of volcanism across the Middle East, Arabia and Africa north of equator suggests that it results from such spoke pattern convection.
△ Less
Submitted 5 March, 2020; v1 submitted 7 November, 2019;
originally announced November 2019.
-
Fast magma ascent, revised estimates from the deglaciation of Iceland
Authors:
David W. Rees Jones,
John F. Rudge
Abstract:
Partial melting of asthenospheric mantle generates magma that supplies volcanic systems. The timescale of melt extraction from the mantle has been hotly debated. Microstructural measurements of permeability typically suggest relatively slow melt extraction (1 m/yr) whereas geochemical (Uranium-decay series) and geophysical observations suggest much faster melt extraction (100 m/yr). The deglaciati…
▽ More
Partial melting of asthenospheric mantle generates magma that supplies volcanic systems. The timescale of melt extraction from the mantle has been hotly debated. Microstructural measurements of permeability typically suggest relatively slow melt extraction (1 m/yr) whereas geochemical (Uranium-decay series) and geophysical observations suggest much faster melt extraction (100 m/yr). The deglaciation of Iceland triggered additional mantle melting and magma flux at the surface. The rapid response has been used to argue for relatively rapid melt extraction. However, this episode must, at least to some extent, be unrepresentative, because the rates of magma eruption at the surface increased about thirty-fold relative to the steady state. Our goal is to quantify this unrepresentativeness. We develop a one-dimensional, time-dependent and nonlinear (far from steady-state), model forced by the most recent, and best mapped, Icelandic deglaciation. We find that 30 m/yr is the best estimate of the steady-state maximum melt velocity. This is a factor of about 3 smaller than previously claimed, but still relatively fast. We translate these estimates to other mid-ocean ridges accounting for differences in passive and active upwelling and degree of melting. We find that fast melt extraction greater than about 10 m/yr prevails globally.
△ Less
Submitted 6 May, 2020; v1 submitted 18 October, 2019;
originally announced October 2019.
-
Rate of Melt Ascent beneath Iceland from the Magmatic Response to Deglaciation
Authors:
Isarapong Eksinchol,
John F. Rudge,
John Maclennan
Abstract:
Observations of the time lag between the last deglaciation and a surge in volcanic activity in Iceland constrain the average melt ascent velocity to be $\geq50$ $\mathrm{m/yr}$. Although existing theoretical work has explained why the surge in eruption rates increased $5$-$30$ fold from the steady-state rates during the last deglaciation, they cannot account for large variations of Rare Earth Elem…
▽ More
Observations of the time lag between the last deglaciation and a surge in volcanic activity in Iceland constrain the average melt ascent velocity to be $\geq50$ $\mathrm{m/yr}$. Although existing theoretical work has explained why the surge in eruption rates increased $5$-$30$ fold from the steady-state rates during the last deglaciation, they cannot account for large variations of Rare Earth Element (REE) concentrations in the Icelandic lavas. Lavas erupted during the last deglaciation are depleted in REEs by up to $70\%$; whereas, existing models, which assume instantaneous melt transport, can only produce at most $20\%$ depletion. Here, we develop a numerical model with finite melt ascent velocity and show that the variations of REEs are strongly dependent on the melt ascent velocity. When the average melt ascent velocity is $100$ $\mathrm{m/yr}$, the variation of $\mathrm{La}$ calculated by our model is comparable to that of the observations. In contrast, when the melt ascent velocity is $1,000$ $\mathrm{m/yr}$ or above, the model variation of $\mathrm{La}$ becomes significantly lower than observed, which explains why previous models with instantaneous melt transport did not reproduce the large variations. We provide the first model that takes account of the diachronous response of volcanism to deglaciation. We show by comparing our model calculations of the relative volumes of different eruption types (subglacial, finiglacial and postglacial) and the timing of the bursts in volcanic eruptions with the observations across different volcanic zones that the Icelandic average melt ascent velocity during the last deglaciation is likely to be $\sim100$ $\mathrm{m/yr}$.
△ Less
Submitted 15 May, 2019; v1 submitted 2 February, 2019;
originally announced February 2019.
-
The melting column as a filter of mantle trace-element heterogeneity
Authors:
Tong Bo,
Richard F. Katz,
Oliver Shorttle,
John F. Rudge
Abstract:
The observed variability of trace-element concentration in basaltic lavas and melt inclusions carries information about heterogeneity in the mantle. The difficulty is to disentangle the contributions of source heterogeneity (i.e., spatial variability of mantle composition before melting) and process heterogeneity (i.e., spatial and temporal variability in melt transport). Here we investigate the e…
▽ More
The observed variability of trace-element concentration in basaltic lavas and melt inclusions carries information about heterogeneity in the mantle. The difficulty is to disentangle the contributions of source heterogeneity (i.e., spatial variability of mantle composition before melting) and process heterogeneity (i.e., spatial and temporal variability in melt transport). Here we investigate the end-member hypothesis that variability arises due to source heterogeneity alone. We model the attenuation of trace-element variability introduced into the bottom of a one-dimensional, steady-state melting column. Our results show that the melting column can be considered to be a filter that attenuates variability according to the wavelength of heterogeneity, the partition coefficient of the trace element, melt productivity and the efficiency of melt segregation. We further show that while the model can be fit to the observations, this requires assumptions inconsistent with constraints on the timescales of magma assembly. Hence, we falsify the end-member hypothesis and, instead, conclude that observed variability requires heterogeneity of melt transport. This might take the form of channels or waves and would almost certainly interact with source heterogeneity.
△ Less
Submitted 11 November, 2018; v1 submitted 27 August, 2018;
originally announced August 2018.
-
The viscosities of partially molten materials undergoing diffusion creep
Authors:
John F. Rudge
Abstract:
Partially molten materials resist shearing and compaction. This resistance is described by a fourth-rank effective viscosity tensor. When the tensor is isotropic, two scalars determine the resistance: an effective shear and an effective bulk viscosity. Here, calculations are presented of the effective viscosity tensor during diffusion creep for a 2D tiling of hexagonal unit cells and a 3D tessella…
▽ More
Partially molten materials resist shearing and compaction. This resistance is described by a fourth-rank effective viscosity tensor. When the tensor is isotropic, two scalars determine the resistance: an effective shear and an effective bulk viscosity. Here, calculations are presented of the effective viscosity tensor during diffusion creep for a 2D tiling of hexagonal unit cells and a 3D tessellation of tetrakaidecahedrons (truncated octahedrons). The geometry of the melt is determined by assuming textural equilibrium. The viscosity tensor for the 2D tiling is isotropic, but that for the 3D tessellation is anisotropic. Two parameters control the effect of melt on the viscosity tensor: the porosity and the dihedral angle. Calculations for both Nabarro-Herring (volume diffusion) and Coble (surface diffusion) creep are presented. For Nabarro-Herring creep the bulk viscosity becomes singular as the porosity vanishes. This singularity is logarithmic, a weaker singularity than typically assumed in geodynamic models. The presence of a small amount of melt (0.1% porosity) causes the effective shear viscosity to approximately halve. For Coble creep, previous modelling work has argued that a very small amount of melt may lead to a substantial, factor of 5, drop in the shear viscosity. Here, a much smaller, factor of 1.4, drop is obtained for tetrakaidecahedrons. Owing to a Cauchy relation symmetry, the Coble creep bulk viscosity is a constant multiple of the shear viscosity when melt is present.
△ Less
Submitted 10 December, 2018; v1 submitted 8 August, 2018;
originally announced August 2018.
-
Textural equilibrium melt geometries around tetrakaidecahedral grains
Authors:
John F. Rudge
Abstract:
In textural equilibrium, partially molten materials minimise the total surface energy bound up in grain boundaries and grain-melt interfaces. Here, numerical calculations of such textural equilibrium geometries are presented for a space-filling tessellation of grains with a tetrakaidecahedral (truncated octahedral) unit cell. Two parameters determine the nature of the geometries: the porosity and…
▽ More
In textural equilibrium, partially molten materials minimise the total surface energy bound up in grain boundaries and grain-melt interfaces. Here, numerical calculations of such textural equilibrium geometries are presented for a space-filling tessellation of grains with a tetrakaidecahedral (truncated octahedral) unit cell. Two parameters determine the nature of the geometries: the porosity and the dihedral angle. A variety of distinct melt topologies occur for different combinations of these two parameters, and the boundaries between different topologies has been determined. For small dihedral angles, wetting of grain boundaries occurs once the porosity has exceeded 11%. An exhaustive account is given of the main properties of the geometries: their energy, pressure, mean curvature, contiguity, and areas on cross-sections and faces. Their effective permeabilities have been calculated, and demonstrate a transition between a quadratic variation with porosity at low porosities to a cubic variation at high porosities.
△ Less
Submitted 7 March, 2018; v1 submitted 11 September, 2017;
originally announced September 2017.
-
Thermal impact of magmatism in subduction zones
Authors:
David W. Rees Jones,
Richard F. Katz,
Meng Tian,
John F. Rudge
Abstract:
Magmatism in subduction zones builds continental crust and causes most of Earth's subaerial volcanism. The production rate and composition of magmas are controlled by the thermal structure of subduction zones. A range of geochemical and heat flow evidence has recently converged to indicate that subduction zones are hotter at lithospheric depths beneath the arc than predicted by canonical thermomec…
▽ More
Magmatism in subduction zones builds continental crust and causes most of Earth's subaerial volcanism. The production rate and composition of magmas are controlled by the thermal structure of subduction zones. A range of geochemical and heat flow evidence has recently converged to indicate that subduction zones are hotter at lithospheric depths beneath the arc than predicted by canonical thermomechanical models, which neglect magmatism. We show that this discrepancy can be resolved by consideration of the heat transported by magma. In our one- and two-dimensional numerical models and scaling analysis, magmatic transport of sensible and latent heat locally alters the thermal structure of canonical models by $\sim$300 K, increasing predicted surface heat flow and mid-lithospheric temperatures to observed values. We find the advection of sensible heat to be larger than the deposition of latent heat. Based on these results we conclude that thermal transport by magma migration affects the chemistry and the location of arc volcanoes.
△ Less
Submitted 21 November, 2017; v1 submitted 10 January, 2017;
originally announced January 2017.
-
Torsion of a cylinder of partially molten rock with a spherical inclusion: theory and simulation
Authors:
Laura Alisic,
Sander Rhebergen,
John F. Rudge,
Richard F. Katz,
Garth N. Wells
Abstract:
The processes that are involved in migration and extraction of melt from the mantle are not yet fully understood. Gaining a better understanding of material properties of partially molten rock could help shed light on the behavior of melt on larger scales in the mantle. In this study, we simulate three-dimensional torsional deformation of a partially molten rock that contains a rigid, spherical in…
▽ More
The processes that are involved in migration and extraction of melt from the mantle are not yet fully understood. Gaining a better understanding of material properties of partially molten rock could help shed light on the behavior of melt on larger scales in the mantle. In this study, we simulate three-dimensional torsional deformation of a partially molten rock that contains a rigid, spherical inclusion. We compare the computed porosity patterns to those found in recent laboratory experiments. The laboratory experiments show emergence of melt-rich bands throughout the rock sample, and pressure shadows around the inclusion. The numerical model displays similar melt-rich bands only for a small bulk-to-shear-viscosity ratio (five or less). The results are consistent with earlier two-dimensional numerical simulations; however, we show that it is easier to form melt-rich bands in three dimensions compared to two. The addition of strain-rate dependence of the viscosity causes a distinct change in the shape of pressure shadows around the inclusion. This change in shape presents an opportunity for experimentalists to identify the strain-rate dependence and therefore the dominant deformation mechanism in torsion experiments with inclusions.
△ Less
Submitted 16 October, 2015; v1 submitted 13 August, 2015;
originally announced August 2015.