-
3D atomic structure from a single XFEL pulse
Authors:
G. Bortel,
M. Tegze,
M. Sikorski,
R. Bean,
J. Bielecki,
C. Kim,
J. Koliyadu,
F. Koua,
M. Ramilli,
A. Round,
T. Sato,
D. Zabelskii,
G. Faigel
Abstract:
X-ray Free Electron Lasers (XFEL) are the most advanced pulsed x-ray sources. Their extraordinary pulse parameters promise unique applications. Indeed, several new methods have been developed at XFEL-s. However, no methods are known, which would allow ab initio atomic level structure determination using only a single XFEL pulse. Here, we present experimental results, demonstrating the determinatio…
▽ More
X-ray Free Electron Lasers (XFEL) are the most advanced pulsed x-ray sources. Their extraordinary pulse parameters promise unique applications. Indeed, several new methods have been developed at XFEL-s. However, no methods are known, which would allow ab initio atomic level structure determination using only a single XFEL pulse. Here, we present experimental results, demonstrating the determination of the 3D atomic structure from data obtained during a single 25 fs XFEL pulse. Parallel measurement of hundreds of Bragg reflections was done by collecting Kossel line patterns of GaAs and GaP. With these measurements, we reached the ultimate temporal limit of the x-ray structure solution possible today. These measurements open the way for studying non-repeatable fast processes and structural transformations in crystals for example measuring the atomic structure of matter at extremely non-ambient conditions or transient structures formed in irreversible physical, chemical, or biological processes. It would also facilitate time resolved pump-probe structural studies making them significantly shorter than traditional serial crystallography.
△ Less
Submitted 27 October, 2023;
originally announced October 2023.
-
STRAW-b (STRings for Absorption length in Water-b): the second pathfinder mission for the Pacific Ocean Neutrino Experiment
Authors:
Kilian Holzapfel,
Christian Spannfellner,
Omid Aghaei,
Andrew Baron,
Jeanette Bedard,
Michael Böhmer,
Jeff Bosma,
Nathan Deis,
Christopher Fink,
Christian Fruck,
Andreas Gärtner,
Roman Gernhäuser,
Felix Henningsen,
Ryan Hotte,
Reyna Jenkyns,
Martina Karl,
Natasha Khera,
Nikhita Khera,
Ian Kulin,
Alex Lam,
Tim Lavallee,
Klaus Leismüller,
Laszlo Papp,
Benoit Pirenne,
Emily Price
, et al. (14 additional authors not shown)
Abstract:
Since 2018, the potential for a high-energy neutrino telescope, named the Pacific Ocean Neutrino Experiment (P-ONE), has been thoroughly examined by two pathfinder missions, STRAW and STRAW-b, short for short for Strings for Absorption Length in Water. The P-ONE project seeks to install a neutrino detector with a one cubic kilometer volume in the Cascadia Basin's deep marine surroundings, situated…
▽ More
Since 2018, the potential for a high-energy neutrino telescope, named the Pacific Ocean Neutrino Experiment (P-ONE), has been thoroughly examined by two pathfinder missions, STRAW and STRAW-b, short for short for Strings for Absorption Length in Water. The P-ONE project seeks to install a neutrino detector with a one cubic kilometer volume in the Cascadia Basin's deep marine surroundings, situated near the western shores of Vancouver Island, Canada. To assess the environmental conditions and feasibility of constructing a neutrino detector of that scale, the pathfinder missions, STRAW and STRAW-b, have been deployed at a depth of 2.7 km within the designated site for P-ONE and were connected to the NEPTUNE observatory, operated by Ocean Networks Canada (ONC). While STRAW focused on analyzing the optical properties of water in the Cascadia Basin, \ac{strawb} employed cameras and spectrometers to investigate the characteristics of bioluminescence in the deep-sea environment. This report introduces the STRAW-b concept, covering its scientific objectives and the instrumentation used. Furthermore, it discusses the design considerations implemented to guarantee a secure and dependable deployment process of STRAW-b. Additionally, it showcases the data collected by battery-powered loggers, which monitored the mechanical stress on the equipment throughout the deployment. The report also offers an overview of STRAW-b's operation, with a specific emphasis on the notable advancements achieved in the data acquisition (DAQ) system and its successful integration with the server infrastructure of ONC.
△ Less
Submitted 6 February, 2024; v1 submitted 25 October, 2023;
originally announced October 2023.
-
3D-Printed Sheet Jet for Stable Megahertz Liquid Sample Delivery at X-ray Free Electron Lasers
Authors:
Patrick E. Konold,
Tong You,
Johan Bielecki,
Joana Valerio,
Marco Kloos,
Daniel Westphal,
Alfredo Bellisario,
Tej Varma,
August Wolter,
Jayanath C. P. Koliyadu,
Faisal H. M. Koua,
Romain Letrun,
Adam Round,
Tokushi Sato,
Petra Mésźaros,
Leonardo Monrroy,
Jennifer Mutisya,
Szabolcs Bódizs,
Taru Larkiala,
Amke Nimmrich,
Roberto Alvarez,
Richard Bean,
Tomas Ekeberg,
Richard A. Kirian,
Sebastian Westenhoff
, et al. (1 additional authors not shown)
Abstract:
X-ray Free Electron Lasers (XFELs) can probe chemical and biological reactions as they unfold with unprecedented spatial and temporal resolution. A principal challenge in this pursuit is the delivery of samples to the X-ray interaction point in a way that produces data of the highest possible quality and efficiency. This is hampered by constraints posed by the light source and operation within a b…
▽ More
X-ray Free Electron Lasers (XFELs) can probe chemical and biological reactions as they unfold with unprecedented spatial and temporal resolution. A principal challenge in this pursuit is the delivery of samples to the X-ray interaction point in a way that produces data of the highest possible quality and efficiency. This is hampered by constraints posed by the light source and operation within a beamline environment. For liquid samples, the solution typically involves a high-speed liquid jet, capable of kee** up with the rate of X-ray pulses. However, conventional jets are not ideal because of radiation-induced explosions of the jet, as well as their cylindrical geometry combined with the X-ray pointing instability of many beamlines causes the interaction volume to differ for every pulse. This complicates data analysis and contributes to measurement errors. An alternative geometry is a liquid sheet jet which, with its constant thickness over large areas, eliminates the X-ray pointing related problems. Since liquid sheets can be made very thin, the radiation-induced explosion is reduced, boosting their stability. They are especially attractive for experiments which benefit from small interaction volumes such as fluctuation X-ray scattering and several types of spectroscopy. Although they have seen increasing use for soft X-ray applications in recent years, there has not yet been wide-scale adoption at XFELs. Here, we demonstrate liquid sheet jet sample injection at the European XFEL. We evaluate several aspects of its performance relative to a conventional liquid jet including thickness profile, stability, and radiation-induced explosion dynamics at high repetition rates. The sheet jet exhibits superior performance across these critical experimental parameters. Its minute thickness also suggests ultrafast single-particle solution scattering is a possibility.
△ Less
Submitted 13 June, 2023;
originally announced June 2023.
-
Ultrasound cavitation and exfoliation dynamics of 2D materials re-vealed in operando by X-ray free electron laser megahertz imaging
Authors:
Kang Xiang,
Shi Huang,
Hongyuan Song,
Vasilii Bazhenov,
Valerio Bellucci,
Sarlota Birnsteinova,
Raphael de Wijn,
Jayanath C. P. Koliyadu,
Faisal H. M. Koua,
Adam Round,
Ekaterina Round,
Abhisakh Sarma,
Tokushi Sato,
Marcin Sikorski,
Yuhe Zhang,
Eleni Myrto Asimakopoulou,
Pablo Villanueva-Perez,
Kyriakos Porfyrakis,
Iakovos Tzanakis,
Dmitry G. Eskin,
Nicole Grobert,
Adrian Mancuso,
Richard Bean,
Patrik Vagovic,
Jiawei Mi
Abstract:
Ultrasonic liquid phase exfoliation is a promising method for the production of two-dimensional (2D) layered materials. A large number of studies have been made in investigating the underlying ultrasound exfoliation mechanisms. However, due to the experimental challenges for capturing the highly transient and dynamic phenomena in real-time at sub-microsecond time and micrometer length scales simul…
▽ More
Ultrasonic liquid phase exfoliation is a promising method for the production of two-dimensional (2D) layered materials. A large number of studies have been made in investigating the underlying ultrasound exfoliation mechanisms. However, due to the experimental challenges for capturing the highly transient and dynamic phenomena in real-time at sub-microsecond time and micrometer length scales simultaneously, most theories reported to date still remain elusive. Here, using the ultra-short X-ray Free Electron Laser pulses (~25ps) with a unique pulse train structure, we applied MHz X-ray Microscopy and machine-learning technique to reveal unambiguously the full cycles of the ultrasound cavitation and graphite layer exfoliation dynamics with sub-microsecond and micrometer resolution. Cyclic fatigue shock wave impacts produced by ultrasound cloud implosion were identified as the dominant mechanism to deflect and exfoliate graphite layers mechanically. For the graphite flakes, exfoliation rate as high as ~5 angstroms per shock wave impact was observed. For the HOPG graphite, the highest exfoliation rate was ~0.15 angstroms per impact. These new findings are scientifically and technologically important for develo** industrial upscaling strategies for ultrasonic exfoliation of 2D materials.
△ Less
Submitted 23 June, 2023; v1 submitted 15 May, 2023;
originally announced May 2023.
-
A simple model for the outcomes of collisions between exhaled aerosol droplets and airborne particulate matter: Towards an understanding of the influence of air pollution on airborne viral transmission
Authors:
Andrew N. Round
Abstract:
A model that predicts the outcome of collisions between droplets and particles in terms of the distribution of the droplet volume post-collision is lacking, in contrast to the case for droplet-droplet interactions. Taking existing models that successfully predict the outcomes (coalescence, stretching or reflexive separation) and post-separation characteristics (sizes, numbers and velocities of the…
▽ More
A model that predicts the outcome of collisions between droplets and particles in terms of the distribution of the droplet volume post-collision is lacking, in contrast to the case for droplet-droplet interactions. Taking existing models that successfully predict the outcomes (coalescence, stretching or reflexive separation) and post-separation characteristics (sizes, numbers and velocities of the resulting droplets) of droplet-droplet collisions and adapting them to take into account an inextensible, non-deformable particle with varying wettability characteristics, a new model is presented for droplet-particle collisions. The predictions of the new model agree well with experimental observations of droplet-particle collisions in low-viscosity regimes.
The model is then applied to the case of collisions between respiratory aerosols generated by breath, speech, cough and sneeze and ambient airborne particulate material (PM) in order to assess the potential contribution of these interactions to the enhanced transmission of pathogens contained in the aerosol, including COVID-19. The results show that under realistic conditions it is possible for aerosol-PM collisions to enrich the pathogen content of smaller (and so more persistent) aerosol fractions, and to transfer pathogens to the surface of PM particles that can travel deep into the respiratory tract. In the context of better knowledge of the size and velocity distributions of respiratory aerosols, this model may be used to predict the extent to which high ambient PM levels may contribute to airborne infection by pathogens such as COVID-19.
△ Less
Submitted 17 September, 2022;
originally announced September 2022.
-
Two-Year Optical Site Characterization for the Pacific Ocean Neutrino Experiment P-ONE in the Cascadia Basin
Authors:
Nicolai Bailly,
Jeannette Bedard,
Michael Böhmer,
Jeff Bosma,
Dirk Brussow,
Jonathan Cheng,
Ken Clark,
Beckey Croteau,
Matthias Danninger,
Fabio De Leo,
Nathan Deis,
Matthew Ens,
Rowan Fox,
Christian Fruck,
Andreas Gärtner,
Roman Gernhäuser,
Dilraj Ghuman,
Darren Grant,
Helen He,
Felix Henningsen,
Kilian Holzapfel,
Ryan Hotte,
Reyna Jenkyns,
Hamish Johnson,
Akanksha Katil
, et al. (32 additional authors not shown)
Abstract:
The STRings for Absorption length in Water (STRAW) are the first in a series of pathfinders for the Pacific Ocean Neutrino Experiment (P-ONE), a future large-scale neutrino telescope in the north-eastern Pacific Ocean. STRAW consists of two 150 m long mooring lines instrumented with optical emitters and detectors. The pathfinder is designed to measure the attenuation length of the water and perfor…
▽ More
The STRings for Absorption length in Water (STRAW) are the first in a series of pathfinders for the Pacific Ocean Neutrino Experiment (P-ONE), a future large-scale neutrino telescope in the north-eastern Pacific Ocean. STRAW consists of two 150 m long mooring lines instrumented with optical emitters and detectors. The pathfinder is designed to measure the attenuation length of the water and perform a long-term assessment of the optical background at the future P-ONE site. After two years of continuous operation, measurements from STRAW show an optical attenuation length of about 28 metres at 450 nm. Additionally, the data allow a study of the ambient undersea background. The overall optical environment reported here is comparable to other deep-water neutrino telescopes and qualifies the site for the deployment of P-ONE.
△ Less
Submitted 8 December, 2021; v1 submitted 10 August, 2021;
originally announced August 2021.
-
The Pacific Ocean Neutrino Experiment
Authors:
M. Agostini,
M. Böhmer,
J. Bosma,
K. Clark,
M. Danninger,
C. Fruck,
R. Gernhäuser,
A. Gärtner,
D. Grant,
F. Henningsen,
K. Holzapfel,
M. Huber,
R. Jenkyns,
C. B. Krauss,
K. Krings,
C. Kopper,
K. Leismüller,
S. Leys,
P. Macoun,
S. Meighen-Berger,
J. Michel,
R. W. Moore,
M. Morley,
P. Padovani,
T. Pollmann
, et al. (11 additional authors not shown)
Abstract:
The Pacific Ocean Neutrino Experiment (P-ONE) is a new initiative with a vision towards constructing a multi-cubic kilometre neutrino telescope, to expand our observable window of the Universe to highest energies, installed within the deep Pacific Ocean underwater infrastructure of Ocean Networks Canada.
The Pacific Ocean Neutrino Experiment (P-ONE) is a new initiative with a vision towards constructing a multi-cubic kilometre neutrino telescope, to expand our observable window of the Universe to highest energies, installed within the deep Pacific Ocean underwater infrastructure of Ocean Networks Canada.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
Megahertz single-particle imaging at the European XFEL
Authors:
Egor Sobolev,
Serguey Zolotarev,
Klaus Giewekemeyer,
Johan Bielecki,
Kenta Okamoto,
Hemanth K. N. Reddy,
Jakob Andreasson,
Kartik Ayyer,
Imrich Barak,
Sadia Bari,
Anton Barty,
Richard Bean,
Sergey Bobkov,
Henry N. Chapman,
Grzegorz Chojnowski,
Benedikt J. Daurer,
Katerina Dörner,
Tomas Ekeberg,
Leonie Flückiger,
Oxana Galzitskaya,
Luca Gelisio,
Steffen Hauf,
Brenda G. Hogue,
Daniel A. Horke,
Ahmad Hosseinizadeh
, et al. (38 additional authors not shown)
Abstract:
The emergence of high repetition-rate X-ray free-electron lasers (XFELs) powered by superconducting accelerator technology enables the measurement of significantly more experimental data per day than was previously possible. The European XFEL will soon provide 27,000 pulses per second, more than two orders of magnitude more than any other XFEL. The increased pulse rate is a key enabling factor for…
▽ More
The emergence of high repetition-rate X-ray free-electron lasers (XFELs) powered by superconducting accelerator technology enables the measurement of significantly more experimental data per day than was previously possible. The European XFEL will soon provide 27,000 pulses per second, more than two orders of magnitude more than any other XFEL. The increased pulse rate is a key enabling factor for single-particle X-ray diffractive imaging, which relies on averaging the weak diffraction signal from single biological particles. Taking full advantage of this new capability requires that all experimental steps, from sample preparation and delivery to the acquisition of diffraction patterns, are compatible with the increased pulse repetition rate. Here, we show that single-particle imaging can be performed using X-ray pulses at megahertz repetition rates. The obtained results pave the way towards exploiting high repetition-rate X-ray free-electron lasers for single-particle imaging at their full repetition rate.
△ Less
Submitted 14 December, 2019;
originally announced December 2019.
-
STRAW (STRings for Absorption length in Water): pathfinder for a neutrino telescope in the deep Pacific Ocean
Authors:
M. Boehmer,
J. Bosma,
D. Brussow,
L. Farmer,
C. Fruck,
R. Gernhäuser,
A. Gärtner,
D. Grant,
F. Henningsen,
S. Hiller,
M. Hoch,
K. Holzapfel,
R. Jenkyns,
Na. Khera,
Ni. Khera,
K. Krings,
C. Kopper,
I. Kulin,
K. Leismüller,
J. Little,
P. Macoun,
J. Michel,
M. Morley,
L. Papp,
B. Pirenne
, et al. (7 additional authors not shown)
Abstract:
We report about the design and the initial performances of the pathfinder mission for a possible large scale neutrino telescope named "STRings for Absorption length in Water" (STRAW). In June 2018 STRAW has been deployed at the Cascadia Basin site operated by Ocean Network Canada and has been collecting data since then. At a depth of about 2600 meters, the two STRAW 120 meters tall mooring lines a…
▽ More
We report about the design and the initial performances of the pathfinder mission for a possible large scale neutrino telescope named "STRings for Absorption length in Water" (STRAW). In June 2018 STRAW has been deployed at the Cascadia Basin site operated by Ocean Network Canada and has been collecting data since then. At a depth of about 2600 meters, the two STRAW 120 meters tall mooring lines are instrumented by three "Precision Optical Calibration Modules" (POCAM) and five Digital Optical Sensors (sDOM). We describe the instrumentation deployed and first light in the Pacific Ocean.
△ Less
Submitted 5 February, 2019; v1 submitted 31 October, 2018;
originally announced October 2018.
