-
Altermagnetism in the hop** regime
Authors:
E. F. Galindez-Ruales,
L. Šmejkal,
S. Das,
E. Baek,
C. Schmitt,
F. Fuhrmann,
A. Ross,
R. González-Hernández,
A. Rothschild,
J. Sinova,
C. -Y. You,
G. Jakob,
M. Kläui
Abstract:
Conventional antiferromagnets are known for their time-reversal symmetry in their electronic structure, which results in a zero anomalous Hall coefficient. On the other hand, compensated magnets with noncollinear or canted moments or altermagnets can yield a nonzero anomalous Hall signal and a nondissipative transversal current. While high-symmetry systems typically exhibit an isotropic Hall effec…
▽ More
Conventional antiferromagnets are known for their time-reversal symmetry in their electronic structure, which results in a zero anomalous Hall coefficient. On the other hand, compensated magnets with noncollinear or canted moments or altermagnets can yield a nonzero anomalous Hall signal and a nondissipative transversal current. While high-symmetry systems typically exhibit an isotropic Hall effect, more interesting are low-symmetry systems, such as hematite, which demonstrates exceptional magnetotransport behavior as it becomes conductive upon slight Ti do**. We scrutinize the magnetotransport in Titanium-doped hematite, revealing a pronounced and unconventional symmetry dependence, particularly contingent on crystal orientation. Our findings establish a compelling correlation between our experimental observations and the classification of hematite as an altermagnet with anisotropic magnetotransport and anomalous Hall effect. Remarkably, our observations result from measurements in the hop**-transport regime, showing that particular transport properties in altermagnets are not limited to conventional band conduction.
△ Less
Submitted 21 January, 2024; v1 submitted 25 October, 2023;
originally announced October 2023.
-
The Ferris ferromagnetic resonance technique: principles and applications
Authors:
Amit Rothschild,
Benjamin Assouline,
Nadav Am Shalom,
Nirel Bernstein,
Goni Daniel,
Gil Cohen,
Amir Capua
Abstract:
Measurements of ferromagnetic resonance (FMR) are pivotal to modern magnetism and spintronics. Recently, we reported on the Ferris FMR technique, which relies on large-amplitude modulation of the externally applied magnetic field. It was shown to benefit from high sensitivity while being broadband. The Ferris FMR also expanded the resonance linewidth such that the sensitivity to spin currents was…
▽ More
Measurements of ferromagnetic resonance (FMR) are pivotal to modern magnetism and spintronics. Recently, we reported on the Ferris FMR technique, which relies on large-amplitude modulation of the externally applied magnetic field. It was shown to benefit from high sensitivity while being broadband. The Ferris FMR also expanded the resonance linewidth such that the sensitivity to spin currents was enhanced as well. Eventually, the spin Hall angle (θ_SH) was measurable even in wafer-level measurements that require low current densities to reduce the Joule heating. Despite the various advantages, analysis of the Ferris FMR response is limited to numerical modeling where the linewidth depends on multiple factors such as the field modulation profile and the magnetization saturation. Here, we describe in detail the basic principles of operation of the Ferris FMR and discuss its applicability and engineering considerations. We demonstrated these principles in a measurement of the orbital Hall effect taking place in Cu, using an Au layer as the orbital to spin current converter. This illustrates the potential of the Ferris FMR for the future development of spintronics technology.
△ Less
Submitted 31 May, 2023;
originally announced June 2023.
-
Efficient generation of spin currents by the Orbital Hall effect in pure Cu and Al and their measurement by a Ferris-wheel ferromagnetic resonance technique at the wafer level
Authors:
Amit Rothschild,
Nadav Am-Shalom,
Nirel Bernstein,
Mayan Meron,
Tal David,
Benjamin Assouline,
Elichai Frohlich,
Jiewen Xiao,
Binghai Yan,
Amir Capua
Abstract:
We present a new ferromagnetic resonance (FMR) method that we term the Ferris FMR. It is wideband, has significantly higher sensitivity as compared to conventional FMR systems, and measures the absorption line rather than its derivative. It is based on large-amplitude modulation of the externally applied magnetic field that effectively magnifies signatures of the spin-transfer torque making its me…
▽ More
We present a new ferromagnetic resonance (FMR) method that we term the Ferris FMR. It is wideband, has significantly higher sensitivity as compared to conventional FMR systems, and measures the absorption line rather than its derivative. It is based on large-amplitude modulation of the externally applied magnetic field that effectively magnifies signatures of the spin-transfer torque making its measurement possible even at the wafer-level. Using the Ferris FMR, we report on the generation of spin currents from the orbital Hall effect taking place in pure Cu and Al. To this end, we use the spin-orbit coupling of a thin Pt layer introduced at the interface that converts the orbital current to a measurable spin current. While Cu reveals a large effective spin Hall angle exceeding that of Pt, Al possesses an orbital Hall effect of opposite polarity in agreement with the theoretical predictions. Our results demonstrate additional spin- and orbit- functionality for two important metals in the semiconductor industry beyond their primary use as interconnects with all the advantages in power, scaling, and cost.
△ Less
Submitted 21 August, 2022;
originally announced August 2022.
-
Electronic Excitations of Hematite Heteroepitaxial Films Measured by Resonant Inelastic X-Ray Scattering at the Fe L-edge
Authors:
David S. Ellis,
Ru-Pan Wang,
Deniz Wong,
Jason K. Cooper,
Christian Schulz,
Yi-De Chuang,
Yifat Piekner,
Daniel A. Grave,
Markus Schleuning,
Dennis Friedrich,
Frank M. F. de Groot,
Avner Rothschild
Abstract:
Resonant Inelastic X-Ray Scattering (RIXS) spectra of hematite were measured at the Fe L3-edge for heteroepitaxial thin films which were undoped and doped with 1% Ti, Sn or Zn, in the energy loss range in excess of 1 eV to study electronic transitions. The spectra were measured for several momentum transfers (q), conducted at both low temperature (T=14K) and room temperature. While we can not rule…
▽ More
Resonant Inelastic X-Ray Scattering (RIXS) spectra of hematite were measured at the Fe L3-edge for heteroepitaxial thin films which were undoped and doped with 1% Ti, Sn or Zn, in the energy loss range in excess of 1 eV to study electronic transitions. The spectra were measured for several momentum transfers (q), conducted at both low temperature (T=14K) and room temperature. While we can not rule out dispersive features possibly owing to propagating excitations, the coarse envelopes of the general spectra did not appreciably change shape with q, implying that the bulk of the observed L-edge RIXS intensity originates from (mostly) non-dispersive ligand field (LF) excitations. Summing the RIXS spectra over q and comparing the results at T=14 K to those at T=300 K, revealed pronounced temperature effects, including an intensity change and energy shift of the 1.4 eV peak, a broadband intensity increase of the 3-4 eV range, and higher energy features. The q-summed spectra and their temperature dependences are virtually identical for nearly all of the samples with different dopants, save for the temperature dependence of the Ti-doped sample's spectrum, which we attribute to being affected by a large number of free charge carriers. Comparing with magnetization measurements for different temperatures and do**s likewise did not show a clear correlation between the RIXS spectra and the magnetic ordering states. To clarify the excited states, we performed spin multiplet calculations which were in excellent agreement with the RIXS spectra over a wide energy range and provide detailed electronic descriptions of the excited states. The implications of these findings to the photoconversion efficiency of hematite photoanodes is discussed.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Magnon Transport in the Presence of Antisymmetric Exchange in a Weak Antiferromagnet
Authors:
A. Ross,
R. Lebrun,
O. Gomonay,
J. Sinova,
A. Kay,
D. A. Grave,
A. Rothschild,
M. Kläui
Abstract:
The Dzyaloshinskii-Moriya interaction (DMI) is at the heart of many modern developments in the research field of spintronics. DMI is known to generate noncollinear magnetic textures, and can take two forms in antiferromagnets: homogeneous or inter-sublattice, leading to small, canted moments and inhomogeneous or intra-sublattice, leading to formation of chiral structures. In this work, we first de…
▽ More
The Dzyaloshinskii-Moriya interaction (DMI) is at the heart of many modern developments in the research field of spintronics. DMI is known to generate noncollinear magnetic textures, and can take two forms in antiferromagnets: homogeneous or inter-sublattice, leading to small, canted moments and inhomogeneous or intra-sublattice, leading to formation of chiral structures. In this work, we first determine the strength of the effective field created by the DMI, using SQUID based magnetometry and transport measurements, in thin films of the antiferromagnetic iron oxide hematite, $α$-Fe$_2$O$_3$. We demonstrate that DMI additionally introduces reconfigurability in the long distance magnon transport in these films under different orientations of a magnetic field. This arises as a hysteresis centred around the easy-axis direction for an external field rotated in opposing directions whose width decreases with increasing magnetic field as the Zeeman energy competes with the effective field created by the DMI.
△ Less
Submitted 18 October, 2021; v1 submitted 24 June, 2021;
originally announced June 2021.
-
Film flip and transfer process to enhance light harvesting in ultrathin absorber films on specular back-reflectors
Authors:
Asaf Kay,
Barbara Scherrer,
Yifat Piekner,
Kirtiman Deo Malviya,
Daniel A Grave,
Hen Dotan,
Avner Rothschild
Abstract:
Optical interference is used to enhance light-matter interaction and harvest broadband light in ultrathin semiconductor absorber films on specular back-reflectors. However, the high-temperature processing in oxygen atmosphere required for oxide absorbers often degrades metallic back-reflectors and their specular reflectance. In order to overcome this problem, we present a newly developed film flip…
▽ More
Optical interference is used to enhance light-matter interaction and harvest broadband light in ultrathin semiconductor absorber films on specular back-reflectors. However, the high-temperature processing in oxygen atmosphere required for oxide absorbers often degrades metallic back-reflectors and their specular reflectance. In order to overcome this problem, we present a newly developed film flip and transfer process that allows for high-temperature processing without degradation of the metallic back-reflector and without the need of passivation interlayers. The film flip and transfer process improves the performance of photoanodes for photoelectrochemical water splitting comprising ultrathin (< 20 nm) hematite (Fe2O3) films on silver-gold alloy (90 at% Ag-10 at% Au) back-reflectors. We obtain specular back-reflectors with high reflectance below hematite films, which is necessary for maximizing the productive light absorption in the hematite film and minimizing non-productive absorption in the back-reflector. Furthermore, the film flip and transfer process opens up a new route to attach thin film stacks onto a wide range of substrates including flexible or temperature sensitive materials.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Defect segregation and its effect on the photoelectrochemical properties of Ti-doped hematite photoanodes for solar water splitting
Authors:
Barbara Scherrer,
Tong Li,
Anton Tsyganok,
Max Döbeli,
Bhavana Gupta,
Kirtiman Deo Malviya,
Olga Kasian,
Nitzan Maman,
Baptiste Gault,
Daniel A. Grave,
Alexander Mehlman,
Iris Visoly-Fisher,
Dierk Raabe,
Avner Rothschild
Abstract:
Optimising the photoelectrochemical performance of hematite photoanodes for solar water splitting requires better understanding of the relationships between dopant distribution, structural defects and photoelectrochemical properties. Here, we use complementary characterisation techniques including electron microscopy, conductive atomic force microscopy (CAFM), Rutherford backscattering spectroscop…
▽ More
Optimising the photoelectrochemical performance of hematite photoanodes for solar water splitting requires better understanding of the relationships between dopant distribution, structural defects and photoelectrochemical properties. Here, we use complementary characterisation techniques including electron microscopy, conductive atomic force microscopy (CAFM), Rutherford backscattering spectroscopy (RBS), atom probe tomography (APT) and intensity modulated photocurrent spectroscopy (IMPS) to study this correlation in Ti-doped (1 cat.%) hematite films deposited by pulsed laser deposition (PLD) on F:SnO2 (FTO) coated glass substrates. The deposition was carried out at 300 °C, followed by annealing at 500 deg C for 2 h. Upon annealing, Ti was observed by APT to segregate to the hematite/FTO interface and into some hematite grains. Since no other pronounced changes in microstructure and chemical composition were observed by electron microscopy and RBS after annealing, the non-uniform Ti redistribution seems to be the reason for a reduced interfacial recombination in the annealed films, as observed by IMPS. This results in a lower onset potential, higher photocurrent and larger fill factor with respect to the as-deposited state. This work provides atomic-scale insights into the microscopic inhomogeneity in Ti-doped hematite thin films and the role of defect segregation in their electrical and photoelectrochemical properties.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
The rust challenge -- On the correlations between electronic structure, excited state dynamics and photoelectrochemical performance of hematite photoanodes for solar water splitting
Authors:
Daniel A. Grave,
Natav Yatom,
David S. Ellis,
Maytal Caspary Toroker,
Avner Rothschild
Abstract:
In recent years, hematite potential as a photoanode material for solar hydrogen production has ignited a renewed interest in its physical and interfacial properties, which continues to be an active field of research. Research on hematite photoanodes provides new insights on the correlations between electronic structure, transport properties, excited state dynamics and charge transfer phenomena, an…
▽ More
In recent years, hematite potential as a photoanode material for solar hydrogen production has ignited a renewed interest in its physical and interfacial properties, which continues to be an active field of research. Research on hematite photoanodes provides new insights on the correlations between electronic structure, transport properties, excited state dynamics and charge transfer phenomena, and expands our knowledge on solar cell materials into correlated electron systems. This research news article presents a snapshot of selected theoretical and experimental developments linking the electronic structure to the photoelectrochemical performance, with particular focus on optoelectronic properties and charge carrier dynamics.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Different roles of Fe1-xNixOOH co-catalyst on hematite (α-Fe2O3) photoanodes with different dopants
Authors:
Anton Tsyganok,
Dino Klotz,
Kirtiman Deo Malviya,
Avner Rothschild,
Daniel A Grave
Abstract:
Transparent Fe1-xNixOOH overlayers (~2 nm thick) were deposited photoelectrochemically on (001) oriented heteroepitaxial Sn- and Zn-doped hematite (Fe2O3) thin film photoanodes. In both cases, the water photo-oxidation performance was improved by the co-catalyst overlayers. Intensity modulated photocurrent spectroscopy (IMPS) was applied to study the changes in the hole current and recombination c…
▽ More
Transparent Fe1-xNixOOH overlayers (~2 nm thick) were deposited photoelectrochemically on (001) oriented heteroepitaxial Sn- and Zn-doped hematite (Fe2O3) thin film photoanodes. In both cases, the water photo-oxidation performance was improved by the co-catalyst overlayers. Intensity modulated photocurrent spectroscopy (IMPS) was applied to study the changes in the hole current and recombination current induced by the overlayers. For the Sn-doped hematite photoanode, the improvement in performance after deposition of the Fe1-xNixOOH overlayer was entirely due to reduction in the recombination current, leading to a cathodic shift in the onset potential. For the Zn-doped hematite photoanode, in addition to a reduction in recombination current, an increase in the hole current to the surface was also observed after the overlayer deposition, leading to a cathodic shift in the onset potential as well as an enhancement in the plateau photocurrent. These results demonstrate that Fe1-xNixOOH co-catalysts can play different roles depending on the underlying hematite photoanode. The effect of the co-catalyst is not always limited to changes in the surface properties, but also to an increase in hole current from the bulk to the surface that indicates a possible crosslink between surface and bulk processes.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Empirical Analysis of the Photoelectrochemical Impedance Response of Hematite Photoanodes for Water Photo-Oxidation
Authors:
Dino Klotz,
Daniel A. Grave,
Hen Dotan,
Avner Rothschild
Abstract:
Photoelectrochemical impedance spectroscopy (PEIS) is a useful tool for the characterization of photoelectrodes for solar water splitting. However, the analysis of PEIS spectra often involves a priori assumptions that might bias the results. This work puts forward an empirical method that analyzes the distribution of relaxation times (DRT), obtained directly from the measured PEIS spectra of a mod…
▽ More
Photoelectrochemical impedance spectroscopy (PEIS) is a useful tool for the characterization of photoelectrodes for solar water splitting. However, the analysis of PEIS spectra often involves a priori assumptions that might bias the results. This work puts forward an empirical method that analyzes the distribution of relaxation times (DRT), obtained directly from the measured PEIS spectra of a model hematite photoanode. By following how the DRT evolves as a function of control parameters such as the applied potential and composition of the electrolyte solution, we obtain unbiased insights into the underlying mechanisms that shape the photocurrent. In a subsequent step, we fit the data to a process-oriented equivalent circuit model (ECM) whose makeup is derived from the DRT analysis in the first step. This yields consistent quantitative trends of the dominant polarization processes observed. Our observations reveal a common step for the photo-oxidation reactions of water and H2O2 in alkaline solution
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
The spatial collection efficiency of photogenerated charge carriers in photovoltaic and photoelectrochemical devices
Authors:
Gideon Segev,
Hen Dotan,
David S. Ellis,
Yifat Piekner,
Dino Klotz,
Jeffrey W. Beeman,
Jason K. Cooper,
Daniel A. Grave,
Ian D. Sharp,
Avner Rothschild
Abstract:
The spatial collection efficiency portrays the driving forces and loss mechanisms in photovoltaic and photoelectrochemical devices. It is defined as the fraction of photogenerated charge carriers created at a specific point within the device that contribute to the photocurrent. In stratified planar structures, the spatial collection efficiency can be extracted out of photocurrent action spectra me…
▽ More
The spatial collection efficiency portrays the driving forces and loss mechanisms in photovoltaic and photoelectrochemical devices. It is defined as the fraction of photogenerated charge carriers created at a specific point within the device that contribute to the photocurrent. In stratified planar structures, the spatial collection efficiency can be extracted out of photocurrent action spectra measurements empirically, with few a priori assumptions. Although this method was applied to photovoltaic cells made of well-understood materials, it has never been used to study unconventional materials such as metal-oxide semiconductors that are often employed in photoelectrochemical cells. This perspective shows the opportunities that this method has to offer for investigating new materials and devices with unknown properties. The relative simplicity of the method, and its applicability to operando performance characterization, makes it an important tool for analysis and design of new photovoltaic and photoelectrochemical materials and devices.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Wavelength Dependent Photocurrent of Hematite Photoanodes: Reassessing the Hole Collection Length
Authors:
Asaf Kay,
Daniel A Grave,
Kirtiman D Malviya,
David S Ellis,
Hen Dotan,
Avner Rothschild
Abstract:
The photoelectrochemical behavior of a planar 1 cm2 thick Ti-doped hematite film deposited on F:SnO2 coated glass was studied with both front and back illumination. Despite low quantum efficiency, photocurrent was observed upon back illumination with low wavelengths, indicating that some photogenerated holes are able to traverse at least 700 nm across the hematite film and effectively oxidize wate…
▽ More
The photoelectrochemical behavior of a planar 1 cm2 thick Ti-doped hematite film deposited on F:SnO2 coated glass was studied with both front and back illumination. Despite low quantum efficiency, photocurrent was observed upon back illumination with low wavelengths, indicating that some photogenerated holes are able to traverse at least 700 nm across the hematite film and effectively oxidize water. This cannot be accounted for using the commonly accepted hole collection length of hematite based on fitting to the Gartner model. Furthermore, under back illumination, 450 nm excitation resulted in increased photocurrent as compared to 530 nm excitation despite most of the light being absorbed further away from the surface. These results demonstrate that the photocurrent is strongly dependent on the optical excitation wavelength, and related to both delocalized holes with long lifetime and localized excitations rather than only being dependent on the proximity of the absorption to the surface.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Implementing strong interference in ultrathin film top absorbers for tandem solar cells
Authors:
Yifat Piekner,
Hen Dotan,
Anton Tsyganok,
Kirtiman Deo Malviya,
Daniel A. Grave,
Ofer Kfir,
Avner Rothschild
Abstract:
Strong interference in ultrathin film semiconductor absorbers on metallic back reflectors has been shown to enhance the light harvesting efficiency of solar cell materials. However, metallic back reflectors are not suitable for tandem cell configurations because photons cannot be transmitted through the device. Here, we introduce a method to implement strong interference in ultrathin film top abso…
▽ More
Strong interference in ultrathin film semiconductor absorbers on metallic back reflectors has been shown to enhance the light harvesting efficiency of solar cell materials. However, metallic back reflectors are not suitable for tandem cell configurations because photons cannot be transmitted through the device. Here, we introduce a method to implement strong interference in ultrathin film top absorbers in a tandem cell configuration through use of distributed Bragg reflectors (DBRs). We showcase this by designing and fabricating a photoelectrochemical-photovoltaic (PEC-PV) stacked tandem cell in a V-shaped configuration where short wavelength photons are reflected back to the photoanode material (hematite, Fe2O3), whereas long wavelength photons are transmitted to the bottom silicon PV cell. We employ optical simulations to determine the optimal thicknesses of the DBR layers and the V-shape angle to maximize light absorption in the ultrathin (10 nm thick) hematite film. The DBR spectral response can be tailored to allow for a more than threefold enhancement in absorbed photons compared to a layer of the same thickness on transparent current collectors. Using a DBR to couple a bottom silicon PV cell with an ultrathin hematite top PEC cell, we demonstrate unassisted solar water splitting and show that DBRs can be designed to enhance strong interference in ultrathin films while enabling stacked tandem cell configuration.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Photoelectrochemical water splitting in separate oxygen and hydrogen cells
Authors:
Avigail Landman,
Hen Dotan,
Gennady E. Shter,
Michael Wullenkord,
Anis Houaijia,
Artjom Maljusch,
Gideon S. Grader,
Avner Rothschild
Abstract:
Solar water splitting provides a promising path for sustainable hydrogen production and solar energy storage. One of the greatest challenges towards large-scale utilization of this technology is reducing the hydrogen production cost. The conventional electrolyzer architecture, where hydrogen and oxygen are co-produced in the same cell, gives rise to critical challenges in photoelectrochemical (PEC…
▽ More
Solar water splitting provides a promising path for sustainable hydrogen production and solar energy storage. One of the greatest challenges towards large-scale utilization of this technology is reducing the hydrogen production cost. The conventional electrolyzer architecture, where hydrogen and oxygen are co-produced in the same cell, gives rise to critical challenges in photoelectrochemical (PEC) water splitting cells that directly convert solar energy and water to hydrogen. Here we overcome these challenges by separating the hydrogen and oxygen cells. The ion exchange in our cells is mediated by auxiliary electrodes, and the cells are connected to each other only by metal wires, enabling centralized hydrogen production. We demonstrate hydrogen generation in separate cells with solar-to-hydrogen conversion efficiency of 7.5%, which can readily surpass 10% using standard commercial components. A basic cost comparison shows that our approach is competitive with conventional PEC systems, enabling safe and potentially affordable solar hydrogen production.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Accurate Determination of the Charge Transfer Efficiency of Photoanodes for Solar Water Splitting
Authors:
Dino Klotz,
Daniel A. Grave,
Avner Rothschild
Abstract:
The oxygen evolution reaction (OER) at the surface of semiconductor photoanodes involves photo-generated holes that oxidize water. A certain fraction of the holes that reach the surface recombine with electrons from the conduction band, giving rise to the surface recombination loss. The charge transfer efficiency, xt, defined as the ratio between the flux of holes that contribute to the water oxid…
▽ More
The oxygen evolution reaction (OER) at the surface of semiconductor photoanodes involves photo-generated holes that oxidize water. A certain fraction of the holes that reach the surface recombine with electrons from the conduction band, giving rise to the surface recombination loss. The charge transfer efficiency, xt, defined as the ratio between the flux of holes that contribute to the water oxidation reaction and the total flux of holes that reach the surface, is an important parameter that helps to distinguish between bulk and surface recombination losses. However, accurate determination of xt by conventional voltammetry measurements is complicated because only the total current is measured and it is difficult to discern between different contributions to the current. Chopped light measurement and hole scavenger measurement techniques are widely employed to determine xt, but they often lead to errors. Intensity modulated photocurrent spectroscopy (IMPS) is better suited for accurate determination of xt because it provides direct information on both the total photocurrent and the surface recombination current. Careful analysis of IMPS measurements at different light intensities is required to account for nonlinear effects. We compare the xt values obtained by these methods using heteroepitaxial hematite photoanodes. A wide spread of xt values is obtained by different analysis methods and different light sources and light intensities. Statistical analysis of the results show good correlation between different methods for measurements carried out with the same light source, light intensity and potential. However, there is a considerable spread in the results obtained by different methods. For accurate determination of xt, we recommend IMPS measurements with a bias light intensity such that the irradiance is as close as possible to the standard solar spectrum.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
An insulating doped antiferromagnet with low magnetic symmetry as a room temperature spin conduit
Authors:
Andrew Ross,
Romain Lebrun,
Lorenzo Baldrati,
Akashdeep Kamra,
Olena Gomonay,
Shilei Ding,
Felix Schreiber,
Dirk Backes,
Francesco Maccherozzi,
Daniel A. Grave,
Avner Rothschild,
Jairo Sinova,
Mathias Kläui
Abstract:
We report room temperature long-distance spin transport of magnons in antiferromagnetic thin film hematite doped with Zn. The additional dopants significantly alter the magnetic anisotropies, resulting in a complex equilibrium spin structure that is capable of efficiently transporting spin angular momentum at room temperature without the need for a well-defined, pure easy-axis or easy-plane anisot…
▽ More
We report room temperature long-distance spin transport of magnons in antiferromagnetic thin film hematite doped with Zn. The additional dopants significantly alter the magnetic anisotropies, resulting in a complex equilibrium spin structure that is capable of efficiently transporting spin angular momentum at room temperature without the need for a well-defined, pure easy-axis or easy-plane anisotropy. We find intrinsic magnon spin-diffusion lengths of up to 1.5 μm, and magnetic domain governed decay lengths of 175 nm for the low frequency magnons, through electrical transport measurements demonstrating that the introduction of non-magnetic dopants does not strongly reduce the transport length scale showing that the magnetic dam** of hematite is not significantly increased. We observe a complex field dependence of the non-local signal independent of the magnetic state visible in the local magnetoresistance and direct magnetic imaging of the antiferromagnetic domain structure. We explain our results in terms of a varying and applied-field-dependent ellipticity of the magnon modes reaching the detector electrode allowing us to tune the spin transport.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Trade-offs in absorption and scattering by nanophotonic structures
Authors:
Kurt Schab,
Austin Rothschild,
Kristi Nguyen,
Miloslav Capek,
Lukas Jelinek,
Mats Gustafsson
Abstract:
Trade-offs between feasible absorption and scattering cross sections of obstacles confined to an arbitrarily shaped volume are formulated as a multi-objective optimization problem solvable by Lagrangian-dual methods. Solutions to this optimization problem yield a Pareto-optimal set, the shape of which reveals the feasibility of achieving simultaneously extremal absorption and scattering. Two forms…
▽ More
Trade-offs between feasible absorption and scattering cross sections of obstacles confined to an arbitrarily shaped volume are formulated as a multi-objective optimization problem solvable by Lagrangian-dual methods. Solutions to this optimization problem yield a Pareto-optimal set, the shape of which reveals the feasibility of achieving simultaneously extremal absorption and scattering. Two forms of the trade-off problems are considered involving both loss and reactive material parameters. Numerical comparisons between the derived multi-objective bounds and several classes of realized structures are made. Additionally, low-frequency (electrically small, long wavelength) limits are examined for certain special cases.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Decoupled photoelectrochemical water splitting system for centralized hydrogen production
Authors:
Avigail Landman,
Rawan Halabi,
Paula Dias,
Hen Dotan,
Alexander Mehlmann,
Gennady E. Shter,
Manar Halabi,
Omayer Naserladeen,
Adélio Mendes,
Gideon S. Grader,
Avner Rothschild
Abstract:
Photoelectrochemical (PEC) water splitting offers an elegant approach for solar energy conversion into hydrogen fuel. Large-scale hydrogen production requires stable and efficient photoelectrodes and scalable PEC cells that are fitted for safe and cost-effective operation. One of the greatest challenges is the collection of hydrogen gas from millions of PEC cells distributed in the solar field. In…
▽ More
Photoelectrochemical (PEC) water splitting offers an elegant approach for solar energy conversion into hydrogen fuel. Large-scale hydrogen production requires stable and efficient photoelectrodes and scalable PEC cells that are fitted for safe and cost-effective operation. One of the greatest challenges is the collection of hydrogen gas from millions of PEC cells distributed in the solar field. In this work, a separate-cell PEC system with decoupled hydrogen and oxygen cells was designed for centralized hydrogen production, using 100 cm2 hematite (a-Fe2O3) photoanodes and nickel hydroxide (Ni(OH)2) / oxyhydroxide (NiOOH) electrodes as redox mediators. The operating conditions of the system components and their configuration were optimized for daily cycles, and ten 8.3 h cycles were carried out under solar simulated illumination without additional bias at an average short-circuit current of 55.2 mA. These results demonstrate successful operation of a decoupled PEC water splitting system with separate hydrogen and oxygen cells.
△ Less
Submitted 8 September, 2020;
originally announced September 2020.
-
Decoupled Water Splitting: From Basic Science to Application
Authors:
Avigail Landman,
Gideon S. Grader,
Avner Rothschild
Abstract:
In this review, we discuss disruptive decoupled water splitting schemes, in which the concurrent production of hydrogen and oxygen in close proximity to each other in conventional electrolysis is replaced by time- or space-separated hydrogen and oxygen production steps. We present the main decoupling strategies, including electrolytic and electrochemical chemical water splitting cycles, and the re…
▽ More
In this review, we discuss disruptive decoupled water splitting schemes, in which the concurrent production of hydrogen and oxygen in close proximity to each other in conventional electrolysis is replaced by time- or space-separated hydrogen and oxygen production steps. We present the main decoupling strategies, including electrolytic and electrochemical chemical water splitting cycles, and the redox materials that facilitate them by mediating the ion exchange between the hydrogen and oxygen evolution reactions. Decoupled water splitting offers increased flexibility and robustness and provides new opportunities for hydrogen production from renewable sources.
△ Less
Submitted 27 July, 2020;
originally announced July 2020.
-
Structural sensitivity of the spin Hall magnetoresistance in antiferromagnetic thin films
Authors:
Andrew Ross,
Romain Lebrun,
Camilo Ulloa,
Daniel A. Grave,
Asaf Kay,
Lorenzo Baldrati,
Florian Kronast,
Sergio Valencia,
Avner Rothschild,
Mathias Kläui
Abstract:
Reading the magnetic state of antiferromagnetic (AFM) thin films is key for AFM spintronic devices. We investigate the underlying physics behind the spin Hall magnetoresistance (SMR) of bilayers of platinum and insulating AFM hematite (α-Fe2O3) and find an SMR efficiency of up to 0.1%, comparable to ferromagnetic based structures. To understand the observed complex SMR field dependence, we analyse…
▽ More
Reading the magnetic state of antiferromagnetic (AFM) thin films is key for AFM spintronic devices. We investigate the underlying physics behind the spin Hall magnetoresistance (SMR) of bilayers of platinum and insulating AFM hematite (α-Fe2O3) and find an SMR efficiency of up to 0.1%, comparable to ferromagnetic based structures. To understand the observed complex SMR field dependence, we analyse the effect of misalignments of the magnetic axis that arise during growth of thin films, by electrical measurements and direct magnetic imaging, and find that a small deviation can result in significant signatures in the SMR response. This highlights the care that must be taken when interpreting SMR measurements on AFM spin textures.
△ Less
Submitted 15 July, 2020; v1 submitted 9 January, 2020;
originally announced January 2020.
-
Propagation length of antiferromagnetic magnons governed by domain configurations
Authors:
Andrew Ross,
Romain Lebrun,
Olena Gomonay,
Daniel A. Grave,
Asaf Kay,
Lorenzo Baldrati,
Sven Becker,
Alireza Qaiumzadeh,
Camilo Ulloa,
Gerhard Jakob,
Florian Kronast,
Jairo Sinova,
Rembert Duine,
Arne Brataas,
Avner Rothschild,
Mathias Kläui
Abstract:
The compensated magnetic order and characteristic, terahertz frequencies of antiferromagnetic materials makes them promising candidates to develop a new class of robust, ultra-fast spintronic devices. The manipulation of antiferromagnetic spin-waves in thin films is anticipated to lead to new exotic phenomena such as spin-superfluidity, requiring an efficient propagation of spin-waves in thin film…
▽ More
The compensated magnetic order and characteristic, terahertz frequencies of antiferromagnetic materials makes them promising candidates to develop a new class of robust, ultra-fast spintronic devices. The manipulation of antiferromagnetic spin-waves in thin films is anticipated to lead to new exotic phenomena such as spin-superfluidity, requiring an efficient propagation of spin-waves in thin films. However, the reported decay length in thin films has so far been limited to a few nanometers. In this work, we achieve efficient spin-wave propagation, over micrometer distances, in thin films of the insulating antiferromagnet hematite with large magnetic domains whilst evidencing much shorter attenuation lengths in multidomain thin films. Through transport and magnetic imaging, we conclude on the role of the magnetic domain structure and spin-wave scattering at domain walls to govern the transport. We manipulate the spin transport by tailoring the domain configuration through field cycle training. For the appropriate crystalline orientation, zero-field spin-transport is achieved across micrometers, as required for device integration.
△ Less
Submitted 1 February, 2021; v1 submitted 5 July, 2019;
originally announced July 2019.
-
Magnetic states at the surface of alpha-Fe2O3 thin films doped with Ti, Zn or Sn
Authors:
David S. Ellis,
Eugen Weschke,
Asaf Kay,
Daniel A. Grave,
Kirtiman Deo Malviya,
Hadar Mor,
Frank M. F. de Groot,
Hen Dotan,
Avner Rothschild
Abstract:
The spin states at the surface of epitaxial thin films of hematite, both undoped and doped with 1% Ti, Sn or Zn, respectively, were probed with x-ray magnetic linear dichroism (XMLD) spectroscopy. Morin transitions were observed for the undoped (T_M~200 K) and Sn-doped (T_M~300 K) cases, while Zn and Ti-doped samples were always in the high and low temperature phases, respectively. In contrast to…
▽ More
The spin states at the surface of epitaxial thin films of hematite, both undoped and doped with 1% Ti, Sn or Zn, respectively, were probed with x-ray magnetic linear dichroism (XMLD) spectroscopy. Morin transitions were observed for the undoped (T_M~200 K) and Sn-doped (T_M~300 K) cases, while Zn and Ti-doped samples were always in the high and low temperature phases, respectively. In contrast to what has been reported for bulk hematite doped with the tetravalent ions Sn4+ and Ti4+, for which T_M dramatically decreases, these dopants substantially increase T_M in thin films, far exceeding the bulk values. The normalized Fe LII-edge dichroism for T<T_M does not strongly depend on do** or temperature, except for an apparent increase of the peak amplitudes for T<100 K. We observed magnetic field-induced inversions of the dichroism peaks. By applying a magnetic field of 6.5 T on the Ti-doped sample, a transition into the T>T_M state was achieved. The temperature dependence of the critical field for the Sn-doped sample was characterized in detail. It was demonstrated the sample-to-sample variations of the Fe LIII-edge spectra were, for the most part, determined solely by the spin orientation state. Calculations of the polarization-depedent spectra based on a spin-multiplet model were in reasonable agreement with the experiment and showed a mixed excitation character of the peak structures.
△ Less
Submitted 28 September, 2017;
originally announced September 2017.
-
Polynomials: a new tool for length reduction in binary discrete convolutions
Authors:
Amihood Amir,
Oren Kapah,
Ely Porat,
Amir Rothschild
Abstract:
Efficient handling of sparse data is a key challenge in Computer Science. Binary convolutions, such as polynomial multiplication or the Walsh Transform are a useful tool in many applications and are efficiently solved.
In the last decade, several problems required efficient solution of sparse binary convolutions. both randomized and deterministic algorithms were developed for efficiently computi…
▽ More
Efficient handling of sparse data is a key challenge in Computer Science. Binary convolutions, such as polynomial multiplication or the Walsh Transform are a useful tool in many applications and are efficiently solved.
In the last decade, several problems required efficient solution of sparse binary convolutions. both randomized and deterministic algorithms were developed for efficiently computing the sparse polynomial multiplication. The key operation in all these algorithms was length reduction. The sparse data is mapped into small vectors that preserve the convolution result. The reduction method used to-date was the modulo function since it preserves location (of the "1" bits) up to cyclic shift.
To date there is no known efficient algorithm for computing the sparse Walsh transform. Since the modulo function does not preserve the Walsh transform a new method for length reduction is needed. In this paper we present such a new method - polynomials. This method enables the development of an efficient algorithm for computing the binary sparse Walsh transform. To our knowledge, this is the first such algorithm. We also show that this method allows a faster deterministic computation of sparse polynomial multiplication than currently known in the literature.
△ Less
Submitted 21 October, 2014;
originally announced October 2014.
-
Improved Deterministic Length Reduction
Authors:
Amihood Amir,
Klim Efremenko,
Oren Kapah,
Ely Porat,
Amir Rothschild
Abstract:
This paper presents a new technique for deterministic length reduction. This technique improves the running time of the algorithm presented in \cite{LR07} for performing fast convolution in sparse data. While the regular fast convolution of vectors $V_1,V_2$ whose sizes are $N_1,N_2$ respectively, takes $O(N_1 \log N_2)$ using FFT, using the new technique for length reduction, the algorithm prop…
▽ More
This paper presents a new technique for deterministic length reduction. This technique improves the running time of the algorithm presented in \cite{LR07} for performing fast convolution in sparse data. While the regular fast convolution of vectors $V_1,V_2$ whose sizes are $N_1,N_2$ respectively, takes $O(N_1 \log N_2)$ using FFT, using the new technique for length reduction, the algorithm proposed in \cite{LR07} performs the convolution in $O(n_1 \log^3 n_1)$, where $n_1$ is the number of non-zero values in $V_1$. The algorithm assumes that $V_1$ is given in advance, and $V_2$ is given in running time. The novel technique presented in this paper improves the convolution time to $O(n_1 \log^2 n_1)$ {\sl deterministically}, which equals the best running time given achieved by a {\sl randomized} algorithm.
The preprocessing time of the new technique remains the same as the preprocessing time of \cite{LR07}, which is $O(n_1^2)$. This assumes and deals the case where $N_1$ is polynomial in $n_1$. In the case where $N_1$ is exponential in $n_1$, a reduction to a polynomial case can be used. In this paper we also improve the preprocessing time of this reduction from $O(n_1^4)$ to $O(n_1^3{\rm polylog}(n_1))$.
△ Less
Submitted 31 January, 2008;
originally announced February 2008.
-
Explicit Non-Adaptive Combinatorial Group Testing Schemes
Authors:
Ely Porat,
Amir Rothschild
Abstract:
Group testing is a long studied problem in combinatorics: A small set of $r$ ill people should be identified out of the whole ($n$ people) by using only queries (tests) of the form "Does set X contain an ill human?". In this paper we provide an explicit construction of a testing scheme which is better (smaller) than any known explicit construction. This scheme has $\bigT{\min[r^2 \ln n,n]}$ test…
▽ More
Group testing is a long studied problem in combinatorics: A small set of $r$ ill people should be identified out of the whole ($n$ people) by using only queries (tests) of the form "Does set X contain an ill human?". In this paper we provide an explicit construction of a testing scheme which is better (smaller) than any known explicit construction. This scheme has $\bigT{\min[r^2 \ln n,n]}$ tests which is as many as the best non-explicit schemes have. In our construction we use a fact that may have a value by its own right: Linear error-correction codes with parameters $[m,k,δm]_q$ meeting the Gilbert-Varshamov bound may be constructed quite efficiently, in $\bigT{q^km}$ time.
△ Less
Submitted 29 April, 2008; v1 submitted 22 December, 2007;
originally announced December 2007.