-
The EUCLID NISP grisms flight models performance
Authors:
Anne Costille,
A. Caillat,
C. Rossin,
S. Pascal,
P. Sanchez,
R. Barette,
P. Laurent,
B. Foulon,
C. Pariès
Abstract:
ESA EUCLID mission will be launched in 2020 to understand the nature of the dark energy responsible of the accelerated expansion of the Universe and to map the geometry of the dark matter. The map will investigate the distanceredshift relationship and the evolution of cosmic structures thanks to two instruments: the NISP and the VIS. The NISP (Near Infrared Spectro-Photometer) is operating in the…
▽ More
ESA EUCLID mission will be launched in 2020 to understand the nature of the dark energy responsible of the accelerated expansion of the Universe and to map the geometry of the dark matter. The map will investigate the distanceredshift relationship and the evolution of cosmic structures thanks to two instruments: the NISP and the VIS. The NISP (Near Infrared Spectro-Photometer) is operating in the near-IR spectral range (0.9-2$μ$m) with two observing modes: the photometric mode for the acquisition of images with broad band filters, and the spectroscopic mode for the acquisition of slitless dispersed images on the detectors. The spectroscopic mode uses four low resolution grisms to cover two spectral ranges: three ''red'' grisms for 1250-1850nm range, with three different orientations, and one ''blue'' grism for 920- 1300nm range. The NISP grisms are complex optical components combining four main optical functions: a grism function (dispersion without beam deviation of the first diffracted order) done by the grating on the prism hypotenuse, a spectral filter done by a multilayer filter deposited on the first face of the prism to select the spectral bandpass, a focus function done by the curved filter face of the prism (curvature radius of 10m) and a spectral wavefront correction done by the grating which grooves paths are nor parallel, neither straight. The development of these components have been started since 10 years at the Laboratoire d'Astrophysique de Marseille (LAM) and was linked to the project phases: prototypes have been developed to demonstrate the feasibility, then engineering and qualification models to validate the optical and mechanical performance of the component, finally the flight models have been manufactured and tested and will be installed on NISP instrument. In this paper, we present the optical performance of the four EUCLID NISP grisms flight models characterized at LAM: wavefront error, spectral transmission and grating groove profiles. The test devices and the methods developed for the characterization of these specific optical components are described. The analysis of the test results have shown that the grisms flight models for NISP are within specifications with an efficiency better than 70% on the spectral bandpass and a wavefront error on surfaces better than 30nm RMS. The components have withstood vibration qualification level up to 11.6g RMS in random test and vacuum cryogenics test down to 130K with measurement of optical quality in transmission. The EUCLID grisms flight models have been delivered to NISP project in November 2017 after the test campaign done at LAM that has demonstrated the compliance to the specifications.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
THERMAP: a mid-infrared spectro-imager for space missions to small bodies in the inner solar system
Authors:
O. Groussin,
J. Licandro,
J. Helbert,
J. -L. Reynaud,
P. Levacher,
M. Reyes García-Talavera,
V. Alí-Lagoa,
P. -E. Blanc,
E. Brageot,
B. Davidsson,
M. Delbó,
M. Deleuze,
A. Delsanti,
J. J. Diaz Garcia,
K. Dohlen,
D. Ferrand,
S. Green,
L. Jorda,
E. Joven Álvarez,
J. Knollenberg,
E. Kührt,
P. Lamy,
E. Lellouch,
J. Le Merrer,
B. Marty
, et al. (6 additional authors not shown)
Abstract:
We present THERMAP, a mid-infrared (8-16 μm) spectro-imager for space missions to small bodies in the inner solar system, developed in the framework of the MarcoPolo-R asteroid sample return mission. THERMAP is very well suited to characterize the surface thermal environment of a NEO and to map its surface composition. The instrument has two channels, one for imaging and one for spectroscopy: it i…
▽ More
We present THERMAP, a mid-infrared (8-16 μm) spectro-imager for space missions to small bodies in the inner solar system, developed in the framework of the MarcoPolo-R asteroid sample return mission. THERMAP is very well suited to characterize the surface thermal environment of a NEO and to map its surface composition. The instrument has two channels, one for imaging and one for spectroscopy: it is both a thermal camera with full 2D imaging capabilities and a slit spectrometer. THERMAP takes advantage of the recent technological developments of uncooled microbolometers detectors, sensitive in the mid-infrared spectral range. THERMAP can acquire thermal images (8-18 μm) of the surface and perform absolute temperature measurements with a precision better than 3.5 K above 200 K. THERMAP can acquire mid-infrared spectra (8-16 μm) of the surface with a spectral resolution Δλ of 0.3 μm. For surface temperatures above 350 K, spectra have a signal-to-noise ratio >60 in the spectral range 9-13 μm where most emission features occur.
△ Less
Submitted 9 September, 2015;
originally announced September 2015.
-
The Microchannel X-ray Telescope for the Gamma-Ray Burst mission SVOM
Authors:
D. Gotz,
J. Osborne,
B. Cordier,
J. Paul,
P. Evans,
A. Beardmore,
A. Martindale,
R. Willingale,
P. O'Brien,
S. Basa,
C. Rossin,
O. Godet,
N. Webb,
J. Greiner,
K. Nandra,
N. Meidinger,
E. Perinati,
A. Santangelo,
K. Mercier,
F. Gonzalez
Abstract:
We present the Microchannel X-ray Telescope, a new light and compact focussing telescope that will be flying on the Sino-French SVOM mission dedicated to Gamma-Ray Burst science. The MXT design is based on the coupling of square pore micro-channel plates with a low noise pnCCD. MXT will provide an effective area of about 50 cmsq, and its point spread function is expected to be better than 3.7 arc…
▽ More
We present the Microchannel X-ray Telescope, a new light and compact focussing telescope that will be flying on the Sino-French SVOM mission dedicated to Gamma-Ray Burst science. The MXT design is based on the coupling of square pore micro-channel plates with a low noise pnCCD. MXT will provide an effective area of about 50 cmsq, and its point spread function is expected to be better than 3.7 arc min (FWHM) on axis. The estimated sensitivity is adequate to detect all the afterglows of the SVOM GRBs, and to localize them to better then 60 arc sec after five minutes of observation.
△ Less
Submitted 9 July, 2014;
originally announced July 2014.
-
The silicon micro-strip detector plane for the LOFT/Wide Field Monitor
Authors:
A. Goldwurm,
P. Ferrando,
D. Götz,
P. Laurent,
F. Lebrun,
O. Limousin,
S. Basa,
W. Bertoli,
E. Delagnes,
Y. Dolgorouky,
O. Gevin,
A. Gros,
C. Gouiffes,
F. Jeanneau,
C. Lachaud,
M. Llored,
C. Olivetto,
G. Prévôt,
D. Renaud,
J. Rodriguez,
C. Rossin,
S. Schanne,
S. Soldi,
P. Varniere
Abstract:
The main objective of the Wide Field Monitor (WFM) on the LOFT mission is to provide unambiguous detection of the high-energy sources in a large field of view, in order to support science operations of the LOFT primary instrument, the LAD. The monitor will also provide by itself a large number of results on the timing and spectral behaviour of hundreds of galactic compact objects, Active Galactic…
▽ More
The main objective of the Wide Field Monitor (WFM) on the LOFT mission is to provide unambiguous detection of the high-energy sources in a large field of view, in order to support science operations of the LOFT primary instrument, the LAD. The monitor will also provide by itself a large number of results on the timing and spectral behaviour of hundreds of galactic compact objects, Active Galactic Nuclei and Gamma-Ray Bursts. The WFM is based on the coded aperture concept where a position sensitive detector records the shadow of a mask projected by the celestial sources. The proposed WFM detector plane, based on Double Sided micro-Strip Silicon Detectors (DSSD), will allow proper 2-dimensional recording of the projected shadows. Indeed the positioning of the photon interaction in the detector with equivalent fine resolution in both directions insures the best imaging capability compatible with the allocated budgets for this telescope on LOFT. We will describe here the overall configuration of this 2D-WFM and the design and characteristics of the DSSD detector plane including its imaging and spectral performances. We will also present a number of simulated results discussing the advantages that this configuration offers to LOFT. A DSSD-based WFM will in particular reduce significantly the source confusion experienced by the WFM in crowded regions of the sky like the Galactic Center and will in general increase the observatory science capability of the mission.
△ Less
Submitted 7 September, 2012;
originally announced September 2012.
-
The AMS-01 Aerogel Threshold Cherenkov counter
Authors:
D. Barancourt,
F. Barao,
G. Barbier,
G. Barreira,
M. Buenerd,
G. Castellini,
E. Choumilov,
J. Favier,
N. Fouque,
A. Gougas,
V. Hermel,
R. Kossakowski,
G. Laborie,
G. Laurenti,
S. -C. Lee,
F. Mayet,
B. Meillon,
Y. -T. Oyang,
V. Plyaskin,
V. Pojidaev,
C. Rossin,
D. Santos,
F. Vezzu,
J. P. Vialle
Abstract:
The Alpha Magnetic Spectrometer in a precursor version (AMS-01), was flown in June 1998 on a 51.6 degrees orbit and at altitudes ranging between 320 and 390 km, on board of the space shuttle Discovery (flight STS-91). AMS-01 included an Aerogel Threshold Cherenkov counter (ATC) to separate antiprotons from electrons and positrons from protons, for momenta below 3.5 GeV/c. This paper presents a d…
▽ More
The Alpha Magnetic Spectrometer in a precursor version (AMS-01), was flown in June 1998 on a 51.6 degrees orbit and at altitudes ranging between 320 and 390 km, on board of the space shuttle Discovery (flight STS-91). AMS-01 included an Aerogel Threshold Cherenkov counter (ATC) to separate antiprotons from electrons and positrons from protons, for momenta below 3.5 GeV/c. This paper presents a description of the ATC counter and reports on its performances during the flight STS-91.
△ Less
Submitted 12 October, 2000;
originally announced October 2000.