-
Cryogenic hybrid magnonic circuits based on spalled YIG thin films
Authors:
**g Xu,
Connor Horn,
Yu Jiang,
Xinhao Li,
Daniel Rosenmann,
Xu Han,
Miguel Levy,
Supratik Guha,
Xufeng Zhang
Abstract:
Yttrium iron garnet (YIG) magnonics has sparked extensive research interests toward harnessing magnons (quasiparticles of collective spin excitation) for signal processing. In particular, YIG magnonics-based hybrid systems exhibit great potentials for quantum information science because of their wide frequency tunability and excellent compatibility with other platforms. However, the broad applicat…
▽ More
Yttrium iron garnet (YIG) magnonics has sparked extensive research interests toward harnessing magnons (quasiparticles of collective spin excitation) for signal processing. In particular, YIG magnonics-based hybrid systems exhibit great potentials for quantum information science because of their wide frequency tunability and excellent compatibility with other platforms. However, the broad application and scalability of thin-film YIG devices in the quantum regime has been severely limited due to the substantial microwave loss in the host substrate for YIG, gadolinium gallium garnet (GGG), at cryogenic temperatures. In this study, we demonstrate that substrate-free YIG thin films can be obtained by introducing the controlled spalling and layer transfer technology to YIG/GGG samples. Our approach is validated by measuring a hybrid device consisting of a superconducting resonator and a spalled YIG film, which gives a strong coupling feature indicating the good coherence of our system. This advancement paves the way for enhanced on-chip integration and the scalability of YIG-based quantum devices.
△ Less
Submitted 19 December, 2023; v1 submitted 17 December, 2023;
originally announced December 2023.
-
X-ray Spectroscopy of a Rare-Earth Molecular System Measured at the Single Atom Limit in Room Temperature
Authors:
Sarah Wieghold,
Nozomi Shirato,
Xinyue Cheng,
Kyaw Zin Latt,
Daniel Trainer,
Richard Sottie,
Daniel Rosenmann,
Eric Masson,
Volker Rose,
Saw Wai Hla
Abstract:
We investigate the limit of X-ray detection at room temperature on rare-earth molecular films using lanthanum and a pyridine-based dicarboxamide organic linker as a model system. Synchrotron X-ray scanning tunneling microscopy is used to probe the molecules with different coverages on a HOPG substrate. X-ray-induced photocurrent intensities are measured as a function of molecular coverage on the s…
▽ More
We investigate the limit of X-ray detection at room temperature on rare-earth molecular films using lanthanum and a pyridine-based dicarboxamide organic linker as a model system. Synchrotron X-ray scanning tunneling microscopy is used to probe the molecules with different coverages on a HOPG substrate. X-ray-induced photocurrent intensities are measured as a function of molecular coverage on the sample allowing a correlation of the amount of La ions with the photocurrent signal strength. X-ray absorption spectroscopy shows cogent M4,5 absorption edges of the lanthanum ion originated by the transitions from the 3d3/2 and 3d5/2 to 4f orbitals. X-ray absorption spectra measured in the tunneling regime further reveal an X-ray excited tunneling current produced at the M4,5 absorption edge of La ion down to the ultimate atomic limit at room temperature.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Dynamic-quenching of a single-photon avalanche photodetector using an adaptive resistive switch
Authors:
Jiyuan Zheng,
Cheng Ji,
Xingjun Xue,
Yuan Yuan,
Keye Sun,
Daniel Rosenmann,
Lai Wang,
Jiamin Wu,
Joe C. Campbell,
Supratik Guha
Abstract:
One of the most common approaches for quenching single-photon avalanche diodes is to use a passive resistor in series with it. A drawback of this approach has been the limited recovery speed of the single-photon avalanche diodes. High resistance is needed to quench the avalanche, leading to slower recharging of the single-photon avalanche diodes depletion capacitor. We address this issue by replac…
▽ More
One of the most common approaches for quenching single-photon avalanche diodes is to use a passive resistor in series with it. A drawback of this approach has been the limited recovery speed of the single-photon avalanche diodes. High resistance is needed to quench the avalanche, leading to slower recharging of the single-photon avalanche diodes depletion capacitor. We address this issue by replacing a fixed quenching resistor with a bias-dependent adaptive resistive switch. Reversible generation of metallic conduction enables switching between low and high resistance states under unipolar bias. As an example, using a Pt/Al2O3/Ag resistor with a commercial silicon single-photon avalanche diodes, we demonstrate avalanche pulse widths as small as ~30 ns, 10x smaller than a passively quenched approach, thus significantly improving the single-photon avalanche diodes frequency response. The experimental results are consistent with a model where the adaptive resistor dynamically changes its resistance during discharging and recharging the single-photon avalanche diodes.
△ Less
Submitted 1 April, 2022; v1 submitted 22 May, 2021;
originally announced May 2021.
-
Experimental demonstration of near-infrared epsilon-near-zero multilayer metamaterial slabs
Authors:
Xiaodong Yang,
Changyu Hu,
Huixu Deng,
Daniel Rosenmann,
David A. Czaplewski,
Jie Gao
Abstract:
Near-infrared epsilon-near-zero (ENZ) metamaterial slabs based on silver-germanium (Ag-Ge) multilayers are experimentally demonstrated. Transmission, reflection and absorption spectra are characterized and used to determine the complex refractive indices and the effective permittivities of the ENZ metamaterial slabs, which match the results obtained from both the numerical simulations and the opti…
▽ More
Near-infrared epsilon-near-zero (ENZ) metamaterial slabs based on silver-germanium (Ag-Ge) multilayers are experimentally demonstrated. Transmission, reflection and absorption spectra are characterized and used to determine the complex refractive indices and the effective permittivities of the ENZ metamaterial slabs, which match the results obtained from both the numerical simulations and the optical nonlocalities analysis. A rapid post-annealing process is used to reduce the collision frequency of silver and therefore decrease the optical absorption loss of multilayer metamaterial slabs. Furthermore, multilayer grating structures are studied to enhance the optical transmission and also tune the location of ENZ wavelength. The demonstrated near-infrared ENZ multilayer metamaterial slabs are important for realizing many exotic applications, such as phase front sha** and engineering of photonic density of states.
△ Less
Submitted 23 September, 2013;
originally announced September 2013.
-
Tungsten silicide films for microwave kinetic inductance detectors
Authors:
Thomas Cecil,
Antonino Miceli,
Orlando Quaranta,
Chian Liu,
Daniel Rosenmann,
Sean McHugh,
Benjamin Mazin
Abstract:
Microwave Kinetic Inductance Detectors (MKIDs) provide highly multiplexed arrays of detectors that can be configured to operate from the sub-millimeter to the X-ray regime. We have examined two tungsten silicide alloys (W5Si3 and WSi2), which are dense alloys that provide a critical temperature tunable with composition, large kinetic inductance fraction, and high normal-state resistivity. We have…
▽ More
Microwave Kinetic Inductance Detectors (MKIDs) provide highly multiplexed arrays of detectors that can be configured to operate from the sub-millimeter to the X-ray regime. We have examined two tungsten silicide alloys (W5Si3 and WSi2), which are dense alloys that provide a critical temperature tunable with composition, large kinetic inductance fraction, and high normal-state resistivity. We have fabricated superconducting resonators and provide measurement data on critical temperature, surface resistance, quality factor, noise, and quasiparticles lifetime. Tungsten silicide appears to be promising for microwave kinetic inductance detectors.
△ Less
Submitted 18 July, 2012; v1 submitted 22 March, 2012;
originally announced March 2012.
-
Antiferromagnetic Domain Wall Engineering in Chromium Films
Authors:
J. M. Logan,
H. C. Kim,
D. Rosenmann,
Z. Cai,
R. Divan,
Oleg G. Shpyrko,
E. D. Isaacs
Abstract:
We have engineered an antiferromagnetic domain wall by utilizing a magnetic frustration effect of a thin iron cap layer deposited on a chromium film. Through lithography and wet etching we selectively remove areas of the Fe cap layer to form a patterned ferromagnetic mask over the Cr film. Removing the Fe locally removes magnetic frustration in user-defined regions of the Cr film. We present x-ray…
▽ More
We have engineered an antiferromagnetic domain wall by utilizing a magnetic frustration effect of a thin iron cap layer deposited on a chromium film. Through lithography and wet etching we selectively remove areas of the Fe cap layer to form a patterned ferromagnetic mask over the Cr film. Removing the Fe locally removes magnetic frustration in user-defined regions of the Cr film. We present x-ray microdiffraction microscopy results confirming the formation of a 90° spin-density wave propagation domain wall in Cr. This domain wall nucleates at the boundary defined by our Fe mask.
△ Less
Submitted 20 February, 2012;
originally announced February 2012.
-
Studies of superconductivity and structure for CaC6 to pressures above 15 GPa
Authors:
M. Debessai,
J. J. Hamlin,
J. S. Schilling,
Y. Meng,
D. Rosenmann,
D. G. Hinks,
H. Claus
Abstract:
The dependence of the superconducting transition temperature Tc of CaC6 has been determined as a function of hydrostatic pressure in both helium-loaded gas and diamond-anvil cells to 0.6 and 32 GPa, respectively. Following an initial increase at the rate +0.39(1) K/GPa, Tc drops abruptly from 15 K to 4 K at 10 GPa. Synchrotron x-ray measurements to 15 GPa point to a structural transition near 10…
▽ More
The dependence of the superconducting transition temperature Tc of CaC6 has been determined as a function of hydrostatic pressure in both helium-loaded gas and diamond-anvil cells to 0.6 and 32 GPa, respectively. Following an initial increase at the rate +0.39(1) K/GPa, Tc drops abruptly from 15 K to 4 K at 10 GPa. Synchrotron x-ray measurements to 15 GPa point to a structural transition near 10 GPa from a rhombohedral to a higher symmetry phase.
△ Less
Submitted 20 April, 2009;
originally announced April 2009.
-
Muon spin rotation study of the magnetic penetration depth in the intercalated graphite superconductor CaC6
Authors:
D. Di Castro,
A. Kanigel,
A. Maisuradze,
A. Keren,
P. Postorino,
D. Rosenmann,
U. Welp,
G. Karapetrov,
H. Claus,
D. G. Hinks,
A. Amato,
J. C. Campuzano
Abstract:
We report temperature- and magnetic field-dependent bulk muon spin rotation measurements in a c-axis oriented superconductor CaC6 in the mixed state. Using both a simple second moment analysis and the more precise analytical Ginzburg-Landau model, we obtained a field independent in-plane magnetic penetration depth λab (0) = 72(3) nm. The temperature dependencies of the normalized muon spin relaxat…
▽ More
We report temperature- and magnetic field-dependent bulk muon spin rotation measurements in a c-axis oriented superconductor CaC6 in the mixed state. Using both a simple second moment analysis and the more precise analytical Ginzburg-Landau model, we obtained a field independent in-plane magnetic penetration depth λab (0) = 72(3) nm. The temperature dependencies of the normalized muon spin relaxation rate and of the normalized superfluid density result to be identical, and both are well represented by the clean limit BCS model with 2Δ/kB Tc = 3.6(1), suggesting that CaC6 is a fully gapped BCS superconductor in the clean limit regime.
△ Less
Submitted 4 July, 2010; v1 submitted 31 March, 2008;
originally announced March 2008.
-
Guiding superconducting vortices by magnetic domain walls
Authors:
V. Vlasko-Vlasov,
U. Welp,
G. Karapetrov,
V. Novosad,
A. Belkin,
D. Rosenmann,
M. Iavarone,
W. -K. Kwok
Abstract:
We demonstrate a unique prospect for inducing anisotropic vortex pinning and manipulating the directional motion of vortices using the stripe domain patterns of a uniaxial magnetic film in a the superconducting/ferromagnetic hybrid. Our observations can be described by a model, which considers interactions between magnetic charges of vortices and surface magnetic charges of domains resulting in…
▽ More
We demonstrate a unique prospect for inducing anisotropic vortex pinning and manipulating the directional motion of vortices using the stripe domain patterns of a uniaxial magnetic film in a the superconducting/ferromagnetic hybrid. Our observations can be described by a model, which considers interactions between magnetic charges of vortices and surface magnetic charges of domains resulting in the enhanced pinning of vortices on domain walls.
△ Less
Submitted 28 January, 2008; v1 submitted 3 May, 2007;
originally announced May 2007.
-
Resistance Anomaly in Disordered Superconducting Films
Authors:
J. Hua,
Z. L. Xiao,
D. Rosenmann,
I. S. Beloborodov,
U. Welp,
W. K. Kwok,
G. W. Crabtree
Abstract:
We report on a resistance anomaly in disordered superconducting films containing arrays of irregularly distributed nanoscale holes. At high driving currents, peaks appear in the resistance as a function of temperature, with peak values up to 2% above the classic normal-state resistance. We attribute the observed resistance anomaly to dissipation-induced granularity which enhances the contributio…
▽ More
We report on a resistance anomaly in disordered superconducting films containing arrays of irregularly distributed nanoscale holes. At high driving currents, peaks appear in the resistance as a function of temperature, with peak values up to 2% above the classic normal-state resistance. We attribute the observed resistance anomaly to dissipation-induced granularity which enhances the contributions from fluctuation-induced reduction of the density of states of the quasiparticles. The granular feature of a disordered superconducting film originates from the inhomogeneous temperature distribution caused by the variation of the local dissipation and/or heat transfer.
△ Less
Submitted 19 January, 2007;
originally announced January 2007.
-
Evidence of Strong-Coupled Superconductivity in CaC6 from Tunneling Spectroscopy
Authors:
C. Kurter,
L. Ozyuzer,
Daniel Mazur,
J. F. Zasadzinski,
D. Rosenmann,
H. Claus,
D. G. Hinks,
K. E. Gray
Abstract:
Point-contact tunneling on CaC$_6$ crystals reproducibly reveals superconducting gaps, $Δ$, of 2.3$\pm$0.2 meV which are $\sim$~40% larger than earlier reports. That puts CaC$_6$ into the class of very strong-coupled superconductors since 2$Δ$/kT$_c\sim$~4.6. Thus soft Ca phonons will be primarily involved in the superconductivity, a conclusion that explains the large Ca isotope effect found rec…
▽ More
Point-contact tunneling on CaC$_6$ crystals reproducibly reveals superconducting gaps, $Δ$, of 2.3$\pm$0.2 meV which are $\sim$~40% larger than earlier reports. That puts CaC$_6$ into the class of very strong-coupled superconductors since 2$Δ$/kT$_c\sim$~4.6. Thus soft Ca phonons will be primarily involved in the superconductivity, a conclusion that explains the large Ca isotope effect found recently for CaC$_6$. Consistency among superconductor-insulator-normal metal (SIN), SIS and Andreev reflection (SN) junctions reinforces the intrinsic nature of this result.
△ Less
Submitted 26 April, 2007; v1 submitted 22 December, 2006;
originally announced December 2006.
-
Large Ca Isotope Effect in CaC6
Authors:
D. G. Hinks,
D. Rosenmann,
H. Claus,
M. S. Bailey,
J. D. Jorgensen
Abstract:
We have measured the Ca isotope effect in the newly discovered superconductor CaC6. The isotope effect coefficient is 0.50(7). If one assumes that this material is a conventional electron-phonon coupled superconductor, this result shows that the superconductivity is dominated by coupling of the electrons by Ca phonon modes and that C phonons contribute very little. Thus, in contrast to MgB2, whe…
▽ More
We have measured the Ca isotope effect in the newly discovered superconductor CaC6. The isotope effect coefficient is 0.50(7). If one assumes that this material is a conventional electron-phonon coupled superconductor, this result shows that the superconductivity is dominated by coupling of the electrons by Ca phonon modes and that C phonons contribute very little. Thus, in contrast to MgB2, where phonons in the B layers are responsible for the superconductivity, in CaC6 the phonons are primarily modes of the intercalated Ca.
△ Less
Submitted 27 April, 2006;
originally announced April 2006.