-
Growth and Structure of alpha-Ta films for Quantum Circuit Integration
Authors:
Loren D. Alegria,
Alex Abelson,
Eunjeong Kim,
Soohyun Im,
Paul M. Voyles,
Vincenzo Lordi,
Jonathan L Dubois,
Yaniv J. Rosen
Abstract:
Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. Remaining loss pathways originate in microscopic defects which manifest as two level systems (TLS) at low temperature. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we inv…
▽ More
Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. Remaining loss pathways originate in microscopic defects which manifest as two level systems (TLS) at low temperature. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we investigate the growth of tantalum using magnetron sputtering on sapphire, Si, and photoresist substrates. In the case of sapphire, we present procedures for growth of fully-oriented films with alpha-Ta [1 1 1] // Al2O3 [0 0 1] and alpha-Ta [1 -1 0] // Al2O3 [1 0 0] orientational relationships, and having residual resistivity ratios (RRR) ~ 60 for 220 nm thick films. On Si, we find a complex grain texturing with Ta [1 1 0] normal to the substrate and RRR ~ 30. We further demonstrate airbridge fabrication using Nb to nucleate alpha-Ta on photoresist surfaces. Superconducting resonators patterned from films on sapphire show TLS-limited quality factors of 1.4 +/- 0.3 x 10^6 at 10 mK. Structural characterization using scanning electron microscopy, X-ray diffraction, low temperature transport, secondary ion mass spectrometry, and transmission electron microscopy reveal the dependence of residual impurities and screw dislocation density on processing conditions. The results provide practical insights for fabrication of high-performing technological devices including qubit arrays, and guide future work on crystallographically deterministic qubit fabrication.
△ Less
Submitted 30 May, 2024; v1 submitted 12 May, 2024;
originally announced May 2024.
-
Local moduli of continuity for permanental processes that are zero at zero
Authors:
Michael B. Marcus,
Jay Rosen
Abstract:
Let $u(s,t)$ be a continuous potential density of a symmetric Lévy process or diffusion with state space $T$ killed at $T_{0}$, the first hitting time of $0$, or at $λ\wedge T_{0}$, where $λ$ is an independent exponential time. Let
\[
f(t)=\int_{T} u(t,v)\,dμ(v), \]
where $μ$ is a finite positive measure on $T$. Let $X_α=\{X_α(t),t\in T \}$ be an $α-$permanental process with kernel
\[
v(…
▽ More
Let $u(s,t)$ be a continuous potential density of a symmetric Lévy process or diffusion with state space $T$ killed at $T_{0}$, the first hitting time of $0$, or at $λ\wedge T_{0}$, where $λ$ is an independent exponential time. Let
\[
f(t)=\int_{T} u(t,v)\,dμ(v), \]
where $μ$ is a finite positive measure on $T$. Let $X_α=\{X_α(t),t\in T \}$ be an $α-$permanental process with kernel
\[
v(s,t)=u(s,t)+f(t). \]
Then when $\lim_{t\to 0}u(t,t)=0$, \[
\limsup_{t\downarrow 0}\frac{X_α(t )}{u(t,t)\log \log 1/t }\ge 1 ,\qquad \text{a.s.} \] and
\[
\limsup_{t\downarrow 0}\frac{X_α(t )}{u(t,t)\log \log 1/t }\le 1+C_{u,h} ,\qquad \text{a.s.} \] where $C_{u,μ}\le |μ|$ is a constant that depends on both $u$ and $μ$, which is given explicitly, and is different in the different examples.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
Red shift of the superconductivity cavity resonance in Josephson junction qubits as a direct signature of TLS population inversion
Authors:
Alexander L. Burin,
Moshe Schechter,
Daniel Tennant,
Keith G. Ray,
Yaniv J. Rosen
Abstract:
Quantum two-level systems (TLSs) limit the performance of superconducting qubits and superconducting and optomechanical resonators breaking down the coherence and absorbing the energy of oscillations. TLS absorption can be suppressed or even switched to the gain regime by inverting TLS populations. Here we theoretically explore the regime where the full inversion of TLS populations is attained at…
▽ More
Quantum two-level systems (TLSs) limit the performance of superconducting qubits and superconducting and optomechanical resonators breaking down the coherence and absorbing the energy of oscillations. TLS absorption can be suppressed or even switched to the gain regime by inverting TLS populations. Here we theoretically explore the regime where the full inversion of TLS populations is attained at energies below a pump field quantization energy by simultaneously applying the pump field and the time varying bias. This regime is attained changing the bias sufficiently slowly to fully invert TLS populations when their energies cross resonance with the pump field and sufficiently fast to avoid TLS relaxation between two resonance crossing events. This population inversion is accompanied by a significant red shift of cavity resonance due to quantum level repulsion. The red-shift in frequency serves as a signature of the population inversion, as its re-entrant behavior as function of bias sweep rate and of the magnitude of the pump field allows the determination of the TLSs dipole moment and relaxation time. The predicted behavior is qualitatively consistent with the recent experimental observations in Al superconducting resonators.
△ Less
Submitted 7 February, 2024; v1 submitted 28 January, 2024;
originally announced January 2024.
-
Stochastic modeling of superconducting qudits in the dispersive regime
Authors:
Kangdi Yu,
Murat C. Sarihan,
** Ho Kang,
Madeline Taylor,
Cody S. Fan,
Ananyo Banerjee,
Jonathan L. DuBois,
Yaniv J. Rosen,
Chee Wei Wong
Abstract:
The field of superconducting quantum computing, based on Josephson junctions, has recently seen remarkable strides in scaling the number of logical qubits. In particular, the fidelities of one- and two-qubit gates have reached the breakeven point with the novel error mitigation and correction methods. Parallel to these advances is the effort to expand the Hilbert space within a single junction or…
▽ More
The field of superconducting quantum computing, based on Josephson junctions, has recently seen remarkable strides in scaling the number of logical qubits. In particular, the fidelities of one- and two-qubit gates have reached the breakeven point with the novel error mitigation and correction methods. Parallel to these advances is the effort to expand the Hilbert space within a single junction or device by employing high-dimensional qubits, otherwise known as qudits. Research has demonstrated the possibility of driving higher-order transitions in a transmon or designing innovative multimode superconducting circuits, termed multimons. These advances can significantly expand the computational basis while simplifying the interconnects in a large-scale quantum processor. In this work we extend the measurement theory of a conventional superconducting qubit to that of a qudit, focusing on modeling the dispersive quadrature measurement in an open quantum system. Under the Markov assumption, the qudit Lindblad and stochastic master equations are formulated and analyzed; in addition, both the ensemble-averaged and the quantum-jump approach of decoherence analysis are detailed with analytical and numerical comparisons. We verify our stochastic model with a series of experimental results on a transmon-type qutrit, verifying the validity of our high-dimensional formalism.
△ Less
Submitted 5 July, 2024; v1 submitted 28 October, 2023;
originally announced October 2023.
-
Law of the iterated logarithm for $k/2$-permanental processes and the local times of related Markov processes
Authors:
Michael B. Marcus,
Jay Rosen
Abstract:
Let $Y$ be a symmetric Borel right process with locally compact state space $T\subseteq R^{1}$ and potential densities $u(x,y)$ with respect to some $σ$-finite measure on $T$. Let $g$ and $f$ be finite excessive functions for $ Y$. Set $$ u_{g, f}(x,y)= u(x,y)+g(x)f(y),\qquad x,y\in T.$$ In this paper we take $Y$ to be a symmetric Lévy process, or a diffusion, that is killed at the end of an indep…
▽ More
Let $Y$ be a symmetric Borel right process with locally compact state space $T\subseteq R^{1}$ and potential densities $u(x,y)$ with respect to some $σ$-finite measure on $T$. Let $g$ and $f$ be finite excessive functions for $ Y$. Set $$ u_{g, f}(x,y)= u(x,y)+g(x)f(y),\qquad x,y\in T.$$ In this paper we take $Y$ to be a symmetric Lévy process, or a diffusion, that is killed at the end of an independent exponential time or the first time it hits 0. Under general smoothness conditions on $g$, $f$, $u$ and points $d\in T$, laws of the iterated logarithm are found for $X_{k/2} =\{X_{k/2}(t), t\in T \}$, a $k/2-$permanental process with kernel $ \{u_{g, f}(x,y),x,y\in T \}$, of the following form: For all integers $k\geq 1$, $$\limsup_{x \to 0}\frac{| X_{k/2}( d+x)- X_{k/2} (d)|}{ \left( 2 σ^{2}\left(x\right)\log\log 1/x\right)^{1/2}}= \left( 2 X _{k/2} (d)\right)^{1/2}, \qquad a.s. ,$$ where, $$σ^2(x)=u(d+x,d+x)+u(x,x)-2u(d+x,x).$$ Using these limit theorems and the Eisenbaum Kaspi Isomorphism Theorem, laws of the iterated logarithm are found for the local times of certain Markov processes with potential densities that have the form of $ \{u_{g, f}(x,y),x,y\in T \}$ or are slight modifications of it.
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
Two-Level Systems in Nucleated and Non-Nucleated Epitaxial alpha-Tantalum films
Authors:
L. D. Alegria,
D. M. Tennant,
K. R. Chaves,
J. R. I. Lee,
S. R. O'Kelley,
Y. J. Rosen,
J L DuBois
Abstract:
Building usefully coherent superconducting quantum processors depends on reducing losses in their constituent materials. Tantalum, like niobium, has proven utility as the primary superconducting layer within highly coherent qubits. But, unlike Nb, high temperatures are typically used to stabilize the desirable body-centered-cubic phase, alpha-Ta, during thin film deposition. It has long been known…
▽ More
Building usefully coherent superconducting quantum processors depends on reducing losses in their constituent materials. Tantalum, like niobium, has proven utility as the primary superconducting layer within highly coherent qubits. But, unlike Nb, high temperatures are typically used to stabilize the desirable body-centered-cubic phase, alpha-Ta, during thin film deposition. It has long been known that a thin Nb layer permits the room-temperature nucleation of alpha-Ta, although neither an epitaxial process nor few-photon microwave loss measurements have been reported for Nb-nucleated Ta films prior to this study. We compare resonators patterned from Ta films grown at high temperature (500 °C) and films nucleated at room temperature, in order to understand the impact of crystalline order on quantum coherence. In both cases, films grew with Al2O3 (001) || Ta (110) indicating that the epitaxial orientation is independent of temperature and is preserved across the Nb/Ta interface. We use conventional low-power spectroscopy to measure two level system (TLS) loss, as well as an electric-field bias technique to measure the effective dipole moments of TLS in the surfaces of resonators. In our measurements, Nb-nucleated Ta resonators had greater loss tangent (1.5 +/- 0.1 x 10^-5) than non-nucleated (5 +/- 1 x 10^-6) in approximate proportion to defect densities as characterized by X-ray diffraction (0.27 ° vs 0.18 ° [110] reflection width) and electron microscopy (30 nm vs 70 nm domain size). The dependence of the loss tangent on domain size indicates that the development of more ordered Ta films is likely to lead to improvements in qubit coherence times. Moreover, low-temperature alpha-Ta epitaxy may enable the growth of new, microstate-free heterostructures which would not withstand high temperature processing.
△ Less
Submitted 18 September, 2023; v1 submitted 24 January, 2023;
originally announced January 2023.
-
Enhancing Qubit Readout with Autoencoders
Authors:
Piero Luchi,
Paolo E. Trevisanutto,
Alessandro Roggero,
Jonathan L. DuBois,
Yaniv J. Rosen,
Francesco Turro,
Valentina Amitrano,
Francesco Pederiva
Abstract:
In addition to the need for stable and precisely controllable qubits, quantum computers take advantage of good readout schemes. Superconducting qubit states can be inferred from the readout signal transmitted through a dispersively coupled resonator. This work proposes a novel readout classification method for superconducting qubits based on a neural network pre-trained with an autoencoder approac…
▽ More
In addition to the need for stable and precisely controllable qubits, quantum computers take advantage of good readout schemes. Superconducting qubit states can be inferred from the readout signal transmitted through a dispersively coupled resonator. This work proposes a novel readout classification method for superconducting qubits based on a neural network pre-trained with an autoencoder approach. A neural network is pre-trained with qubit readout signals as autoencoders in order to extract relevant features from the data set. Afterwards, the pre-trained network inner layer values are used to perform a classification of the inputs in a supervised manner. We demonstrate that this method can enhance classification performance, particularly for short and long time measurements where more traditional methods present lower performance.
△ Less
Submitted 6 September, 2023; v1 submitted 30 November, 2022;
originally announced December 2022.
-
Simulating noise on a quantum processor: interactions between a qubit and resonant two-level system bath
Authors:
Yu** Cho,
Dipti Jasrasaria,
Keith G. Ray,
Daniel M. Tennant,
Vincenzo Lordi,
Jonathan L DuBois,
Yaniv J. Rosen
Abstract:
Material defects fundamentally limit the coherence times of superconducting qubits, and manufacturing completely defect-free devices is not yet possible. Therefore, understanding the interactions between defects and a qubit in a real quantum processor design is essential. We build a model that incorporates the standard tunneling model, the electric field distributions in the qubit, and open quantu…
▽ More
Material defects fundamentally limit the coherence times of superconducting qubits, and manufacturing completely defect-free devices is not yet possible. Therefore, understanding the interactions between defects and a qubit in a real quantum processor design is essential. We build a model that incorporates the standard tunneling model, the electric field distributions in the qubit, and open quantum system dynamics, and draws from the current understanding of two-level system (TLS) theory. Specifically, we start with one million TLSs distributed on the surface of a qubit and pick the 200 systems that are most strongly coupled to the qubit. We then perform a full Lindbladian simulation that explicitly includes the coherent coupling between the qubit and the TLS bath to model the time dependent density matrix of resonant TLS defects and the qubit. We find that the 200 most strongly coupled TLSs can accurately describe the qubit energy relaxation time. This work confirms that resonant TLSs located in areas where the electric field is strong can significantly affect the qubit relaxation time, even if they are located far from the Josephson junction. Similarly, a strongly-coupled resonant TLS located in the Josephson junction does not guarantee a reduced qubit relaxation time if a more strongly coupled TLS is far from the Josephson junction. In addition to the coupling strengths between TLSs and the qubit, the model predicts that the geometry of the device and the TLS relaxation time play a significant role in qubit dynamics. Our work can provide guidance for future quantum processor designs with improved qubit coherence times.
△ Less
Submitted 7 June, 2023; v1 submitted 15 November, 2022;
originally announced November 2022.
-
Noise-specific beats in the higher-level Ramsey curves of a transmon qubit
Authors:
L. A. Martinez,
Z. Peng,
D. Appelö,
D. M. Tennant,
N. Anders Petersson,
J. L DuBois,
Y. J. Rosen
Abstract:
In the higher levels of superconducting transmon devices, and more generally charge sensitive devices, $T_2^*$ measurements made in the presence of low-frequency time-correlated $1/f$ charge noise and quasiparticle-induced parity flips can give an underestimation of the total dephasing time. The charge variations manifest as beating patterns observed in the overlay of several Ramsey fringe curves,…
▽ More
In the higher levels of superconducting transmon devices, and more generally charge sensitive devices, $T_2^*$ measurements made in the presence of low-frequency time-correlated $1/f$ charge noise and quasiparticle-induced parity flips can give an underestimation of the total dephasing time. The charge variations manifest as beating patterns observed in the overlay of several Ramsey fringe curves, and are reproduced with a phenomenological Ramsey curve model which accounts for the charge variations. $T_2^*$ dephasing times which more accurately represent the total dephasing time are obtained. The phenomenological model is compared with a Lindblad master equation model. Both models are found to be in agreement with one another and the experimental data. Finally, the phenomenological formulation enables a simple method in which the power spectral density (PSD) for the low-frequency noise can be inferred from the overlay of several Ramsey curves.
△ Less
Submitted 11 November, 2022;
originally announced November 2022.
-
Tunable Localized Charge Transfer Excitons in a Mixed Dimensional van der Waals Heterostructure
Authors:
Mahfujur Rahaman,
Emanuele Marino,
Alan G. Joly,
Seunguk Song,
Zhiqiao Jiang,
Brian T. OCallahan,
Daniel J. Rosen,
Kiyoung Jo,
Gwangwoo Kim,
Patrick Z. El-Khoury,
Christopher B. Murray,
Deep Jariwala
Abstract:
Observation of interlayer, charge-transfer (CT) excitons in van der Waals heterostructures (vdWHs) based on 2D-2D systems has been well investigated. While conceptually interesting, these charge transfer excitons are highly delocalized and spatially localizing them requires twisting layers at very specific angles. This issue of localizing the CT excitons can be overcome via making mixed dimensiona…
▽ More
Observation of interlayer, charge-transfer (CT) excitons in van der Waals heterostructures (vdWHs) based on 2D-2D systems has been well investigated. While conceptually interesting, these charge transfer excitons are highly delocalized and spatially localizing them requires twisting layers at very specific angles. This issue of localizing the CT excitons can be overcome via making mixed dimensional vdWHs (MDHs) where one of the components is a spatially quantum confined medium. Here, we demonstrate the formation of CT excitons in a 2D/quasi-2D system comprising MoSe2 and WSe2 monolayers and CdSe/CdS based core/shell nanoplates (NPLs). Spectral signatures of CT excitons in our MDHs were resolved locally at the 2D/single-NPL heterointerface using tip-enhanced photoluminescence (TEPL) at room temperature. By varying both the 2D material, the shell thickness of the NPLs, and applying out-of-plane electric field, the exciton resonance energy was tuned by up to 120 meV. Our finding is a significant step towards the realization of highly tunable MDH-based next generation photonic devices.
△ Less
Submitted 22 October, 2022;
originally announced October 2022.
-
Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films
Authors:
Clio Azina,
Tim Bartsch,
Damian M. Holzapfel,
Martin Dahlqvist,
Johanna Rosen,
Lukas Löfler,
Alba San Jose Mendez,
Marcus Hans,
Daniel Primetzhofer,
Jochen M. Schneider
Abstract:
Herein we report on the synthesis of a metastable (Cr,Y)2AlC MAX phase solid solution by co-sputtering from a composite Cr-Al-C and elemental Y target, at room temperature, followed by annealing. While direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room temperature depositions, followed by annealing to 760 °C led to the formation of phas…
▽ More
Herein we report on the synthesis of a metastable (Cr,Y)2AlC MAX phase solid solution by co-sputtering from a composite Cr-Al-C and elemental Y target, at room temperature, followed by annealing. While direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room temperature depositions, followed by annealing to 760 °C led to the formation of phase pure (Cr,Y)2AlC by diffusion. Higher annealing temperatures caused decomposition of the metastable phase into Cr2AlC, Y5Al3 , and Cr-carbides. In contrast to pure Cr2AlC, the Y-containing phase crystallizes directly in the MAX phase structure instead of first forming a disordered solid solution. Furthermore, the crystallization temperature was shown to be Y-content dependent and was increased by ~200 °C for 5 at.% Y compared to Cr2AlC. Calculations predicting the metastable phase formation of (Cr,Y)2AlC and its decomposition are in excellent agreement with the experimental findings.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
The ring of finite algebraic numbers and its application to the law of decomposition of primes
Authors:
Julian Rosen,
Yoshihiro Takeyama,
Koji Tasaka,
Shuji Yamamoto
Abstract:
In this paper, we develop an explicit method to express finite algebraic numbers (in particular, certain idempotents among them) in terms of linear recurrent sequences, and give applications to the characterization of the splitting primes in a given finite Galois extension over the rational field.
In this paper, we develop an explicit method to express finite algebraic numbers (in particular, certain idempotents among them) in terms of linear recurrent sequences, and give applications to the characterization of the splitting primes in a given finite Galois extension over the rational field.
△ Less
Submitted 12 May, 2024; v1 submitted 24 August, 2022;
originally announced August 2022.
-
A Simulation Methodology for Superconducting Qubit Readout Fidelity
Authors:
Hiu Yung Wong,
Yaniv Jacob Rosen,
Kristin M. Beck,
Prabjot Dhillon
Abstract:
Qubit readout is a critical part of any quantum computer including the superconducting-qubit-based one. The readout fidelity is affected by the readout pulse width, readout pulse energy, resonator design, qubit design, qubit-resonator coupling, and the noise generated along the readout path. It is thus important to model and predict the fidelity based on various design parameters along the readout…
▽ More
Qubit readout is a critical part of any quantum computer including the superconducting-qubit-based one. The readout fidelity is affected by the readout pulse width, readout pulse energy, resonator design, qubit design, qubit-resonator coupling, and the noise generated along the readout path. It is thus important to model and predict the fidelity based on various design parameters along the readout path. In this work, a simulation methodology for superconducting qubit readout fidelity is proposed and implemented using Matlab and Ansys HFSS to allow the co-optimization in the readout path. As an example, parameters are taken from an actual superconducting-qubit-based quantum computer and the simulation is calibrated to one experimental point. It is then used to predict the readout error of the system as a function of readout pulse width and power and the results match the experiment well. It is found that the system can still maintain high fidelity even if the input power is reduced by 7dB or if the readout pulse width is 40% narrower. This can be used to guide the design and optimization of a superconducting qubit readout system.
△ Less
Submitted 18 July, 2022;
originally announced July 2022.
-
Generating the Group of Nonzero Elements of a Quadratic Extension of $\mathbb{F}_{p}$
Authors:
Jerry D Rosen,
Daniel Sarian,
Susan Elizabeth Slome
Abstract:
It is well known that if $\mathbb{F}$ is a finite field then $\mathbb{F^{*}}$, the set of non zero elements of $\mathbb{F}$, is a cyclic group. In this paper we will assume $\mathbb{F}=\mathbb{F}_{p}$ (the finite field with p elements, p a prime) and $\mathbb{\mathbb{F}}_{p^{2}}$ is a quadratic extension of $\mathbb{F}_{p}$. In this case, the groups $\mathbb{F}_{p}^{*}$ and…
▽ More
It is well known that if $\mathbb{F}$ is a finite field then $\mathbb{F^{*}}$, the set of non zero elements of $\mathbb{F}$, is a cyclic group. In this paper we will assume $\mathbb{F}=\mathbb{F}_{p}$ (the finite field with p elements, p a prime) and $\mathbb{\mathbb{F}}_{p^{2}}$ is a quadratic extension of $\mathbb{F}_{p}$. In this case, the groups $\mathbb{F}_{p}^{*}$ and $\mathbb{F}_{p^{2}}^{*}$ have orders $p-1$ and $p^{2}-1$ respectively. We will provide necessary and sufficient conditions for an element $u\in\mathbb{F}_{p^{2}}^{*}$ to be a generator. Specifically, we will prove $u$ is a generator of $\mathbb{F}_{p^{2}}^{*}$ if and only if $N(u)$ generates $\mathbb{F}_{p}^{*}$ and $\frac{u^{2}}{N(u)}$ generates Ker$\,N$, where $N:\mathbb{F}_{p^{2}}^{*}\rightarrow\mathbb{F}_{p}^{*}$ denotes the norm map. We will also provide a method for determining if $u$ is not a generator of Ker$\,N$.
△ Less
Submitted 2 July, 2022; v1 submitted 29 March, 2022;
originally announced March 2022.
-
Tightness for Thick Points in two dimensions
Authors:
Jay Rosen
Abstract:
Let $W_{t}$ be Brownian motion in the plane started at the origin and let $ θ$ be the first exit time of the unit disk $D_{1}$. Let
\[μ_{ θ} ( x,ε) =\frac{1}{πε^{ 2} }\int_{0}^{ θ}1_{\{ B( x,ε)\}}( W_{t})\,dt,\] and set $μ^{ \ast}_{ θ} (ε)=\sup_{x\in D_{1}}μ_{ θ} ( x,ε)$. We show that \[\sqrt{μ^{\ast}_θ (ε)}-\sqrt{2/π} \left(\log ε^{-1}- \frac{1}{2}\log\log ε^{-1}\right)\] is tight.
Let $W_{t}$ be Brownian motion in the plane started at the origin and let $ θ$ be the first exit time of the unit disk $D_{1}$. Let
\[μ_{ θ} ( x,ε) =\frac{1}{πε^{ 2} }\int_{0}^{ θ}1_{\{ B( x,ε)\}}( W_{t})\,dt,\] and set $μ^{ \ast}_{ θ} (ε)=\sup_{x\in D_{1}}μ_{ θ} ( x,ε)$. We show that \[\sqrt{μ^{\ast}_θ (ε)}-\sqrt{2/π} \left(\log ε^{-1}- \frac{1}{2}\log\log ε^{-1}\right)\] is tight.
△ Less
Submitted 27 March, 2022;
originally announced March 2022.
-
Preparation of Metrological States in Dipolar-Interacting Spin Systems
Authors:
Tian-Xing Zheng,
Anran Li,
Jude Rosen,
Sisi Zhou,
Martin Koppenhöfer,
Ziqi Ma,
Frederic T. Chong,
Aashish A. Clerk,
Liang Jiang,
Peter C. Maurer
Abstract:
Spin systems are an attractive candidate for quantum-enhanced metrology. Here we develop a variational method to generate metrological states in small dipolar-interacting ensembles with limited qubit controls and unknown spin locations. The generated states enable sensing beyond the standard quantum limit (SQL) and approaching the Heisenberg limit (HL). Depending on the circuit depth and the level…
▽ More
Spin systems are an attractive candidate for quantum-enhanced metrology. Here we develop a variational method to generate metrological states in small dipolar-interacting ensembles with limited qubit controls and unknown spin locations. The generated states enable sensing beyond the standard quantum limit (SQL) and approaching the Heisenberg limit (HL). Depending on the circuit depth and the level of readout noise, the resulting states resemble Greenberger-Horne-Zeilinger (GHZ) states or Spin Squeezed States (SSS). Sensing beyond the SQL holds in the presence of finite spin polarization and a non-Markovian noise environment.
△ Less
Submitted 6 March, 2022;
originally announced March 2022.
-
Correlation strength, orbital-selective incoherence, and local moments formation in the magnetic MAX-phase Mn$_2$GaC
Authors:
H. J. M. Jönsson,
M. Ekholm,
I. Leonov,
M. Dahlqvist,
J. Rosen,
I. A. Abrikosov
Abstract:
We perform a theoretical study of the electronic structure and magnetic properties of the prototypical magnetic MAX-phase Mn$_2$GaC with the main focus given to the origin of magnetic interactions in this system. Using the density functional theory+dynamical mean-field theory (DFT+DMFT) method we explore the effects of electron-electron interactions and magnetic correlations on the electronic prop…
▽ More
We perform a theoretical study of the electronic structure and magnetic properties of the prototypical magnetic MAX-phase Mn$_2$GaC with the main focus given to the origin of magnetic interactions in this system. Using the density functional theory+dynamical mean-field theory (DFT+DMFT) method we explore the effects of electron-electron interactions and magnetic correlations on the electronic properties, magnetic state, and spectral weight coherence of paramagnetic and magnetically-ordered phases of Mn$_2$GaC. We also benchmark the DFT-based disordered local moment approach for this system by comparing the obtained electronic and magnetic properties with that of the DFT+DMFT method.
Our results reveal a complex magnetic behavior characterized by a near degeneracy of the ferro- and antiferromagnetic configurations of Mn$_2$GaC, implying a high sensitivity of its magnetic state to fine details of the crystal structure and unit-cell volume, consistent with experimental observations.
We observe robust local-moment behavior and orbital-selective incoherence of the spectral properties of Mn$_2$GaC, implying the importance of orbital-dependent localization of the Mn $3d$ states.
We find that Mn$_2$GaC can be described in terms of local magnetic moments, which may be modeled by DFT with disordered local moments. However, the magnetic properties are dictated by the proximity to the regime of formation of local magnetic moments, in which the localization is in fact driven by the Hund's exchange interaction, and not the Coulomb interaction.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
-
Experimentally revealing anomalously large dipoles in a quantum-circuit dielectric
Authors:
Liuqi Yu,
Shlomi Matityahu,
Yaniv J. Rosen,
Chih-Chiao Hung,
Andrii Maksymov,
Alexander L. Burin,
Moshe Schechter,
Kevin D. Osborn
Abstract:
Quantum two-level systems (TLSs) intrinsic to glasses induce decoherence in many modern quantum devices, such as superconducting qubits. Although the low-temperature physics of these TLSs is usually well-explained by a phenomenological standard tunneling model of independent TLSs, the nature of these TLSs, as well as their behavior out of equilibrium and at high energies above 1 K, remain inconclu…
▽ More
Quantum two-level systems (TLSs) intrinsic to glasses induce decoherence in many modern quantum devices, such as superconducting qubits. Although the low-temperature physics of these TLSs is usually well-explained by a phenomenological standard tunneling model of independent TLSs, the nature of these TLSs, as well as their behavior out of equilibrium and at high energies above 1 K, remain inconclusive. Here we measure the non-equilibrium dielectric loss of TLSs in amorphous silicon using a superconducting resonator, where energies of TLSs are varied in time using a swept electric field. Our results show the existence of two distinct ensembles of TLSs, interacting weakly and strongly with phonons, where the latter also possesses anomalously large electric dipole moment. These results may shed new light on the low temperature characteristics of amorphous solids, and hold implications to experiments and applications in quantum devices using time-varying electric fields.
△ Less
Submitted 28 July, 2022; v1 submitted 20 October, 2021;
originally announced October 2021.
-
Low frequency correlated charge noise measurements across multiple energy transitions in a tantalum transmon
Authors:
Daniel M. Tennant,
Luis A. Martinez,
Kristin M. Beck,
Sean R. O'Kelley,
Christopher D. Wilen,
R. McDermott,
Jonathan L DuBois,
Yaniv J. Rosen
Abstract:
Transmon qubits fabricated with tantalum metal have been shown to possess energy relaxation times greater than 300 $μ$s and, as such, present an attractive platform for high precision, correlated noise studies across multiple higher energy transitions. Tracking the multi-level fluctuating qudit frequencies with a precision enabled by the high coherence of the device allows us to extract the charge…
▽ More
Transmon qubits fabricated with tantalum metal have been shown to possess energy relaxation times greater than 300 $μ$s and, as such, present an attractive platform for high precision, correlated noise studies across multiple higher energy transitions. Tracking the multi-level fluctuating qudit frequencies with a precision enabled by the high coherence of the device allows us to extract the charge offset and quasi-particle dynamics. We observe qualitatively different charge offset behavior in the tantalum device than those measured in previous low frequency charge noise studies. In particular, we find the charge offset dynamics are dominated by rare, discrete jumps between a finite number of quasi-stationary charge configurations, a previously unobserved charge noise process in superconducting qubits.
△ Less
Submitted 29 November, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Local and uniform moduli of continuity of chi--square processes
Authors:
Michael B. Marcus,
Jay Rosen
Abstract:
Let $η=\{η(t);t\in [0,1]\}$ be a mean zero continuous Gaussian process with covariance $U=\{U(s,t),s,t\in [ 0,1]\},$ with $U(0,0)>0$. Let $\{η_{i};i=1,\ldots, k\}$ be independent copies of $η$ and set $ Y_{k}(t)=\sum_{i=1}^{k} η^2_{i}(t), t\in [ 0,1].$ The stochastic process $Y_{k } =\{Y_{k }(t),t\in [ 0,1] \}$ is referred to as a chi--square process of order $k $ with kernel $U$. Let $φ(t)$ be a…
▽ More
Let $η=\{η(t);t\in [0,1]\}$ be a mean zero continuous Gaussian process with covariance $U=\{U(s,t),s,t\in [ 0,1]\},$ with $U(0,0)>0$. Let $\{η_{i};i=1,\ldots, k\}$ be independent copies of $η$ and set $ Y_{k}(t)=\sum_{i=1}^{k} η^2_{i}(t), t\in [ 0,1].$ The stochastic process $Y_{k } =\{Y_{k }(t),t\in [ 0,1] \}$ is referred to as a chi--square process of order $k $ with kernel $U$. Let $φ(t)$ be a positive function on $[0,δ]$ for some $δ>0$. If \[\limsup_{t\to 0}\frac{ η(t)-η(0)}{ φ(t) }=1 \qquad a.s., \] then for all integers $k\ge 1$, \[ \limsup_{t\to 0} \frac{Y_{k }(t)-Y_{k }(0)} { φ(t)} = 2 Y^{1/2}_{k}(0) \qquad a.s.\] Set \[ σ^2(u,v)=E(η(u)-η(v))^2\quad\text{and}\quad \widetildeσ^2(x)=\sup_{|u-v|\le x}σ^2(u,v).\] Assume that $\inf_{t\in [0,1]}U(t,t)>0$ and, \[ \lim_{x\to0}\widetildeσ^2(x)\log 1/x =0. \] Let $\varphi(t)$ be a positive function on $[0,1]$. Then if \[ \lim_{h\to 0}\sup_{\stackrel{|u-v|\le h }{ u,v\inΔ}}\frac{ η(u)-η(v)}{ \varphi(|u-v|) }=1 \qquad a.s.\] for all intervals $Δ\subset [0,1]$, it follows that for all intervals $Δ\subset [0,1]$ and all integers $k\ge 1$, \[ \lim_{h\to 0}\sup_{\stackrel{|u-v|\le h }{ u,v\inΔ}} \frac{Y_{k }(u)-Y_{k }(v) }{ \varphi (|u-v|)} = 2 \sup_{u\inΔ}Y_{k }^{1/2}(u), \hspace{.2 in}a.s.\]
△ Less
Submitted 1 June, 2021;
originally announced June 2021.
-
Magnetic structure determination of rare-earth based, high moment, atomic laminates; potential parent materials for 2D magnets
Authors:
Daniel Potashnikov,
Elad Nisan Caspi,
Asaf Pesach,
Quanzheng Tao,
Johanna Rosen,
Denis Sheptyakov,
Hayden A. Evans,
Clemens Ritter,
Zaher Salman,
Pietro Bonfa,
Thierry Ouisse,
Maxime Barbier,
Oleg Rivin,
Amit Keren
Abstract:
We report muon spin rotation ($μ$SR) and neutron diffraction on the rare-earth based magnets (Mo$_{2/3}$RE$_{1/3}$)$_2$AlC, also predicted as parent materials for 2D derivatives, where RE = Nd, Gd (only ($μ$SR), Tb, Dy, Ho and Er. By crossing information between the two techniques, we determine the magnetic moment ($m$), structure, and dynamic properties of all compounds. We find that only for RE…
▽ More
We report muon spin rotation ($μ$SR) and neutron diffraction on the rare-earth based magnets (Mo$_{2/3}$RE$_{1/3}$)$_2$AlC, also predicted as parent materials for 2D derivatives, where RE = Nd, Gd (only ($μ$SR), Tb, Dy, Ho and Er. By crossing information between the two techniques, we determine the magnetic moment ($m$), structure, and dynamic properties of all compounds. We find that only for RE = Nd and Gd the moments are frozen on a microsecond time scale. Out of these two, the most promising compound for a potential 2D high ($m$) magnet is the Gd variant, since the parent crystals are pristine with $m = 6.5 \pm 0.5 μ_B$, Néel temperature of $29 \pm 1$ K, and the magnetic anisotropy between in and out of plane coupling is smaller than $10^{-8}$. This result suggests that magnetic ordering in the Gd variant is dominated by in-plane magnetic interactions and should therefore remain stable if exfoliated into 2D sheets.
△ Less
Submitted 21 September, 2021; v1 submitted 30 May, 2021;
originally announced May 2021.
-
Shack Hartmann wavefront sensor with array of phase coded masks
Authors:
Nitin Dubey,
Ravi Kumar,
Joseph Rosen
Abstract:
Shack-Hartmann wavefront sensors (SHWS) are generally used to measure the wavefront curvature of light beams. Measurement accuracy and the sensitivity of these sensors are important factors for better wavefront sensing. In this study, we demonstrate a new type of SHWS with better measurement accuracy than the regular SHWS. The lenslet array in the regular SHWS is replaced with an array of coded ph…
▽ More
Shack-Hartmann wavefront sensors (SHWS) are generally used to measure the wavefront curvature of light beams. Measurement accuracy and the sensitivity of these sensors are important factors for better wavefront sensing. In this study, we demonstrate a new type of SHWS with better measurement accuracy than the regular SHWS. The lenslet array in the regular SHWS is replaced with an array of coded phase masks and the principle of coded aperture correlation holography (COACH) is used for wavefront reconstruction. Sharper correlation peaks achieved by COACH improve the accuracy of the estimated local slopes of the measured wavefront and consequently improve the reconstruction accuracy of the overall wavefront. Experimental results confirm that the proposed method provides a lower mean square wavefront error by one order of magnitude in comparison to the regular SHWS.
△ Less
Submitted 30 May, 2021;
originally announced May 2021.
-
Ethical Challenges in the Human-Robot Interaction Field
Authors:
Julia Rosén,
Jessica Lindblom,
Erik Billing,
Maurice Lamb
Abstract:
The aim of this extended abstract is to introduce five examples of ethical issues in HRI that could have potential ethical implications, particularly on HRI participants. We consider these examples important to discuss in order to reach a consensus on how to handle them. Due to space limitations, this list is far from exhaustive and we hope that it can lead to a wider discussion that stimulates HR…
▽ More
The aim of this extended abstract is to introduce five examples of ethical issues in HRI that could have potential ethical implications, particularly on HRI participants. We consider these examples important to discuss in order to reach a consensus on how to handle them. Due to space limitations, this list is far from exhaustive and we hope that it can lead to a wider discussion that stimulates HRI researchers to think ethically. Previous work has shown a trend of underreporting ethical conduct in the HRI field; in this extended abstract we consider some of the ethical issues that could arise in HRI research.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
Cryogenic single-port calibration for superconducting microwave resonator measurements
Authors:
Haozhi Wang,
S. Singh,
C. R. H. McRae,
J. C. Bardin,
S. -X. Lin,
N. Messaoudi,
A. R. Castelli,
Y. J. Rosen,
E. T. Holland,
D. P. Pappas,
J. Y. Mutus
Abstract:
Superconducting circuit testing and materials loss characterization requires robust and reliable methods for the extraction of internal and coupling quality factors of microwave resonators. A common method, imposed by limitations on the device design or experimental configuration, is the single-port reflection geometry, i.e. reflection-mode. However, impedance mismatches in cryogenic systems must…
▽ More
Superconducting circuit testing and materials loss characterization requires robust and reliable methods for the extraction of internal and coupling quality factors of microwave resonators. A common method, imposed by limitations on the device design or experimental configuration, is the single-port reflection geometry, i.e. reflection-mode. However, impedance mismatches in cryogenic systems must be accounted for through calibration of the measurement chain while it is at low temperatures. In this paper, we demonstrate a data-based, single-port calibration using commercial microwave standards and a vector network analyzer (VNA) with samples at millikelvin temperature in a dilution refrigerator, making this method useful for measurements of quantum phenomena. Finally, we cross reference our data-based, single-port calibration and reflection measurement with over-coupled 2D- and 3D-resonators against well established two-port techniques corroborating the validity of our method.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
The moduli space of $G$-algebras
Authors:
Andrew O'Desky,
Julian Rosen
Abstract:
Let $L$ be a Galois algebra with Galois group $G$ and let $x$ be a normal element of $L$. The moduli space $\mathcal X$ of pairs $(L,x)$ is isomorphic to an open subset of the quotient variety $\mathbb P/G$, where $\mathbb P$ is the projective space of the regular representation of $G$. We provide a formula for the height of any pair $(L,x) \in \mathcal X(\mathbb Q)$ in terms of algebraic invarian…
▽ More
Let $L$ be a Galois algebra with Galois group $G$ and let $x$ be a normal element of $L$. The moduli space $\mathcal X$ of pairs $(L,x)$ is isomorphic to an open subset of the quotient variety $\mathbb P/G$, where $\mathbb P$ is the projective space of the regular representation of $G$. We provide a formula for the height of any pair $(L,x) \in \mathcal X(\mathbb Q)$ in terms of algebraic invariants of $L$ and $x$ with respect to a natural adelic metric on the anticanonical divisor of $\mathbb P/G$.
△ Less
Submitted 13 March, 2023; v1 submitted 15 November, 2020;
originally announced November 2020.
-
Nonlinear Signal Distortion Corrections Through Quantum Sensing
Authors:
Kevin R. Chaves,
Xian Wu,
Yaniv J. Rosen,
Jonathan L DuBois
Abstract:
Having accurate gate generation is essential for precise control of a quantum system. The generated gate usually suffers from linear and nonlinear distortion. Previous works have demonstrated how to use a qubit to correct linear frequency distortions but have not commented on how to handle nonlinear distortions. This is an important issue as we show that nonlinear amplitude distortions from the RF…
▽ More
Having accurate gate generation is essential for precise control of a quantum system. The generated gate usually suffers from linear and nonlinear distortion. Previous works have demonstrated how to use a qubit to correct linear frequency distortions but have not commented on how to handle nonlinear distortions. This is an important issue as we show that nonlinear amplitude distortions from the RF electronics can affect Rabi pulses by as much as 10%. We present work that demonstrates how a transmon qubit can be used as a highly sensitive cryogenic detector to characterize these nonlinear amplitude distortions. We show that a correction can drive these errors down to <1% over a 700 MHz range. This correction technique provides a method to minimize the effects of signal distortions and can be easily applied to broadband control pulses to produce higher fidelity arbitrary quantum gates.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Origin of Mechanical and Dielectric Losses from Two-Level Systems in Amorphous Silicon
Authors:
M. Molina-Ruiz,
Y. J. Rosen,
H. C. Jacks,
M. R. Abernathy,
T. H. Metcalf,
X. Liu,
J. L Dubois,
F. Hellman
Abstract:
Amorphous silicon contains tunneling two-level systems, which are the dominant energy loss mechanisms for amorphous solids at low temperatures. These two-level systems affect both mechanical and electromagnetic oscillators and are believed to produce thermal and electromagnetic noise and energy loss. However, it is unclear whether the two-level systems that dominate mechanical and dielectric losse…
▽ More
Amorphous silicon contains tunneling two-level systems, which are the dominant energy loss mechanisms for amorphous solids at low temperatures. These two-level systems affect both mechanical and electromagnetic oscillators and are believed to produce thermal and electromagnetic noise and energy loss. However, it is unclear whether the two-level systems that dominate mechanical and dielectric losses are the same; the former relies on phonon-TLS coupling, with an elastic field coupling constant, $γ$, while the latter depends on a TLS dipole moment, $p_0$, which couples to the electromagnetic field. Mechanical and dielectric loss measurements as well as structural characterization were performed on amorphous silicon thin films grown by electron beam deposition with a range of growth parameters. Samples grown at 425 $^{\circ}$C show a large reduction of mechanical loss (34 times) and a far smaller reduction of dielectric loss (2.3 times) compared to those grown at room temperature. Additionally, mechanical loss shows lower loss per unit volume for thicker films, while dielectric loss shows lower loss per unit volume for thinner films. Analysis of these results indicate that mechanical loss correlates with atomic density, while dielectric loss correlates with dangling bond density, suggesting a different origin for these two energy dissipation processes in amorphous silicon.
△ Less
Submitted 17 August, 2020;
originally announced August 2020.
-
Quantitative phase-contrast imaging: a bridge between qualitative phase-contrast and phase retrieval algorithms
Authors:
Nathaniel Hai,
Joseph Rosen
Abstract:
In the last five decades, iterative phase retrieval methods draw large amount of interest across the research community as a non-interferometric approach to recover quantitative phase distributions from one (or more) intensity measurement. However, in cases where a unique solution does exist, these methods often require oversampling and high computational resources, which limits the use of this ap…
▽ More
In the last five decades, iterative phase retrieval methods draw large amount of interest across the research community as a non-interferometric approach to recover quantitative phase distributions from one (or more) intensity measurement. However, in cases where a unique solution does exist, these methods often require oversampling and high computational resources, which limits the use of this approach in important applications. On the other hand, phase contrast methods are based on a single camera exposure but provides only a qualitative description of the phase, thus are not useful for applications in which the quantitative phase description is needed. In this study we adopt a combined approach of the two above-mentioned methods to overcome their respective drawbacks. We show that a modified phase retrieval algorithm easily converges to the correct solution by initializing the algorithm with a phase-induced intensity measurement, namely with a phase contrast image of the examined object. Accurate quantitative phase measurements for both binary and continuously varying phase objects are demonstrated to support the suggested system as a single-shot quantitative phase contrast microscope.
△ Less
Submitted 19 July, 2020;
originally announced July 2020.
-
Exact moduli of continuity for general chi--square processes and for permanental processes related to the Ornstein--Uhlenbeck process
Authors:
Michael B. Marcus,
Jay Rosen
Abstract:
Let $ \overline B=\{ \overline B_{t},t\in R^{1} \}$ be Brownian motion killed after an independent exponential time with mean $2/λ^{2}$. The process $\overline B$ has potential densities, \[
u(x,y) ={e^{-λ|y-x|}\over λ},\qquad x,y\in R^{ 1}, \] which is also the covariance of an Ornstein--Uhlenbeck process. Let $f$ be an excessive function for $\overline B$. Then,
\[
{e^{-λ|y-x|}\over λ}+f(y…
▽ More
Let $ \overline B=\{ \overline B_{t},t\in R^{1} \}$ be Brownian motion killed after an independent exponential time with mean $2/λ^{2}$. The process $\overline B$ has potential densities, \[
u(x,y) ={e^{-λ|y-x|}\over λ},\qquad x,y\in R^{ 1}, \] which is also the covariance of an Ornstein--Uhlenbeck process. Let $f$ be an excessive function for $\overline B$. Then,
\[
{e^{-λ|y-x|}\over λ}+f(y),\qquad x,y\in R^{ 1}, \]
is the kernel of an $α$-permanental process $ X_α=\{ X_α(t), t\in R^{ 1}\}$ for all $α>0$. It is shown that for all $k\ge 1$ and intervals $Δ\subseteq [0,1] $, \[
\limsup_{h\to 0}\sup_{\stackrel{|u-v|\le h }{ u,v\inΔ}} \frac{|X_{k/2} (u)-X_{k/2} (v)|}{ 2 ( |u-v| \log 1/|u-v|)^{1/2}}= \sqrt 2 \sup_{t\inΔ}X_{k/2}^{1/2}(t)\qquad a.s.\] The local modulus of continuity of $X_{k/2}$ for all $k\ge 1$ is also obtained.
Local and uniform moduli of continuity are also obtained for chi--square processes which are defined by,
\[
Y_{k/2}(t)=\sum_{i=1}^{k}\frac{η^2_{i}(t)}{2},\qquad t\in [0,1],
\]
where $η=\{η(t);t\in [0,1]\}$ is a mean zero Gaussian process and $\{η_{i};i=1,\ldots, k\}$ are independent copies of $η.$
△ Less
Submitted 1 June, 2021; v1 submitted 25 June, 2020;
originally announced June 2020.
-
Coded aperture correlation holographic microscope for single-shot quantitative phase imaging with extended field of view
Authors:
Nathaniel Hai,
Joseph Rosen
Abstract:
Recently, a method of recording holograms of coherently illuminated three-dimensional scene without two-wave interference was demonstrated. The method is an extension of the coded aperture correlation holography from incoherent to coherent illumination. Although this method is practical for some tasks, it is not capable of imaging phase objects, a capability that is an important benefit of coheren…
▽ More
Recently, a method of recording holograms of coherently illuminated three-dimensional scene without two-wave interference was demonstrated. The method is an extension of the coded aperture correlation holography from incoherent to coherent illumination. Although this method is practical for some tasks, it is not capable of imaging phase objects, a capability that is an important benefit of coherent holography. The present work addresses this limitation by using the same type of coded phase masks in a modified Mach-Zehnder interferometer. We show that by several comparative parameters, the coded aperture-based phase imaging is superior to the equivalent open aperture-based method. As an additional merit of the coded aperture approach, a framework for increasing the system's field of view is formulated and demonstrated for both amplitude and phase objects. The combination of high sensitivity quantitative phase microscope with increased field of view in a single camera shot holographic apparatus, has immense potential to serve as the preferred tool for examination of biological tissues and micro-organisms.
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
Improving Qubit Readout with Hidden Markov Models
Authors:
Luis A. Martinez,
Yaniv J. Rosen,
Jonathan L. DuBois
Abstract:
We demonstrate the application of pattern recognition algorithms via hidden Markov models (HMM) for qubit readout. This scheme provides a state-path trajectory approach capable of detecting qubit state transitions and makes for a robust classification scheme with higher starting state assignment fidelity than when compared to a multivariate Gaussian (MVG) or a support vector machine (SVM) scheme.…
▽ More
We demonstrate the application of pattern recognition algorithms via hidden Markov models (HMM) for qubit readout. This scheme provides a state-path trajectory approach capable of detecting qubit state transitions and makes for a robust classification scheme with higher starting state assignment fidelity than when compared to a multivariate Gaussian (MVG) or a support vector machine (SVM) scheme. Therefore, the method also eliminates the qubit-dependent readout time optimization requirement in current schemes. Using a HMM state discriminator we estimate fidelities reaching the ideal limit. Unsupervised learning gives access to transition matrix, priors, and IQ distributions, providing a toolbox for studying qubit state dynamics during strong projective readout.
△ Less
Submitted 31 October, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
High-fidelity software-defined quantum logic on a superconducting qudit
Authors:
Xian Wu,
S. L. Tomarken,
N. Anders Petersson,
L. A. Martinez,
Yaniv J. Rosen,
Jonathan L DuBois
Abstract:
Nearly all modern solid-state quantum processors approach quantum computation with a set of discrete qubit operations (gates) that can achieve universal quantum control with only a handful of primitive gates. In principle, this approach is highly flexible, allowing full control over the qubits' Hilbert space without necessitating the development of specific control protocols for each application.…
▽ More
Nearly all modern solid-state quantum processors approach quantum computation with a set of discrete qubit operations (gates) that can achieve universal quantum control with only a handful of primitive gates. In principle, this approach is highly flexible, allowing full control over the qubits' Hilbert space without necessitating the development of specific control protocols for each application. However, current error rates on quantum hardware place harsh limits on the number of primitive gates that can be concatenated together (with compounding error rates) and remain viable. Here, we report our efforts at implementing a software-defined $0\leftrightarrow2$ SWAP gate that does not rely on a primitive gate set and achieves an average gate fidelity of $99.4\%$. Our work represents an alternative, fully generalizable route towards achieving nontrivial quantum control through the use of optimal control techniques. We describe our procedure for computing optimal control solutions, calibrating the quantum and classical hardware chain, and characterizing the fidelity of the optimal control gate.
△ Less
Submitted 19 October, 2020; v1 submitted 27 May, 2020;
originally announced May 2020.
-
Compatibility of $Zr_{2}AlC$ MAX phase-based ceramics with oxygen-poor, static liquid lead-bismuth eutectic
Authors:
Bensu Tunca,
Thomas Lapauw,
Carolien Callaert,
Joke Hadermann,
Remi Delville,
El'ad N. Caspi,
Martin Dahlqvist,
Johanna Rosén,
Amalraj Marshal,
Konda G. Pradeep,
Jochen M. Schneider,
Jozef Vleugels,
Konstantina Lambrinou
Abstract:
This work investigates the compatibility of $Zr_{2}AlC$ MAX phase-based ceramics with liquid LBE, and proposes a mechanism to explain the observed local $Zr_{2}AlC$/LBE interaction. The ceramics were exposed to oxygen-poor ($C_{O}\le2.2 \cdot10^{-10}$ mass%), static liquid LBE at 500°C for 1000 h. A new $Zr_{2}(Al,Bi,Pb)C$ MAX phase solid solution formed in-situ in the LBE-affected $Zr_{2}AlC$ gra…
▽ More
This work investigates the compatibility of $Zr_{2}AlC$ MAX phase-based ceramics with liquid LBE, and proposes a mechanism to explain the observed local $Zr_{2}AlC$/LBE interaction. The ceramics were exposed to oxygen-poor ($C_{O}\le2.2 \cdot10^{-10}$ mass%), static liquid LBE at 500°C for 1000 h. A new $Zr_{2}(Al,Bi,Pb)C$ MAX phase solid solution formed in-situ in the LBE-affected $Zr_{2}AlC$ grains. Out-of-plane ordering was favorable in the new solid solution, whereby $\textit{A}$-layers with high and low-Bi/Pb contents alternated in the crystal structure, in agreement with first-principles calculations. Bulk $Zr_{2}(Al,Bi,Pb)C$ was synthesized by reactive hot pressing to study the crystal structure of the solid solution by neutron diffraction.
△ Less
Submitted 4 May, 2020;
originally announced May 2020.
-
Simulating nonnative cubic interactions on noisy quantum machines
Authors:
Yuan Shi,
Alessandro R. Castelli,
Xian Wu,
Ilon Joseph,
Vasily Geyko,
Frank R. Graziani,
Stephen B. Libby,
Jeffrey B. Parker,
Yaniv J. Rosen,
Luis A. Martinez,
Jonathan L DuBois
Abstract:
As a milestone for general-purpose computing machines, we demonstrate that quantum processors can be programmed to efficiently simulate dynamics that are not native to the hardware. Moreover, on noisy devices without error correction, we show that simulation results are significantly improved when the quantum program is compiled using modular gates instead of a restricted set of standard gates. We…
▽ More
As a milestone for general-purpose computing machines, we demonstrate that quantum processors can be programmed to efficiently simulate dynamics that are not native to the hardware. Moreover, on noisy devices without error correction, we show that simulation results are significantly improved when the quantum program is compiled using modular gates instead of a restricted set of standard gates. We demonstrate the general methodology by solving a cubic interaction problem, which appears in nonlinear optics, gauge theories, as well as plasma and fluid dynamics. To encode the nonnative Hamiltonian evolution, we decompose the Hilbert space into a direct sum of invariant subspaces in which the nonlinear problem is mapped to a finite-dimensional Hamiltonian simulation problem. In a three-states example, the resultant unitary evolution is realized by a product of ~20 standard gates, using which ~10 simulation steps can be carried out on state-of-the-art quantum hardware before results are corrupted by decoherence. In comparison, the simulation depth is improved by more than an order of magnitude when the unitary evolution is realized as a single cubic gate, which is compiled directly using optimal control. Alternatively, parametric gates may also be compiled by interpolating control pulses. Modular gates thus obtained provide high-fidelity building blocks for quantum Hamiltonian simulations.
△ Less
Submitted 13 February, 2021; v1 submitted 15 April, 2020;
originally announced April 2020.
-
Permanental sequences that are related to a Markov chain example of Kolmogorov
Authors:
Michael B. Marcus,
Jay Rosen
Abstract:
Permanental sequences with non-symmetric kernels that are generalization of the potentials of a Markov chain with state space $\{0,1/2, \ldots, 1/n,\ldots\}$ that was introduced by Kolmogorov, are studied. Depending on a parameter in the kernels we obtain an exact rate of divergence of the sequence at $0$, an exact local modulus of continuity of the sequence at $0$, or a precise bounded discontinu…
▽ More
Permanental sequences with non-symmetric kernels that are generalization of the potentials of a Markov chain with state space $\{0,1/2, \ldots, 1/n,\ldots\}$ that was introduced by Kolmogorov, are studied. Depending on a parameter in the kernels we obtain an exact rate of divergence of the sequence at $0$, an exact local modulus of continuity of the sequence at $0$, or a precise bounded discontinuity for the sequence at $0$.
△ Less
Submitted 9 May, 2020; v1 submitted 30 November, 2019;
originally announced December 2019.
-
Toward Synergic Learning for Autonomous Manipulation of Deformable Tissues via Surgical Robots: An Approximate Q-Learning Approach
Authors:
Sahba Aghajani Pedram,
Peter Walker Ferguson,
Changyeob Shin,
Ankur Mehta,
Erik P. Dutson,
Farshid Alambeigi,
Jacob Rosen
Abstract:
In this paper, we present a synergic learning algorithm to address the task of indirect manipulation of an unknown deformable tissue. Tissue manipulation is a common yet challenging task in various surgical interventions, which makes it a good candidate for robotic automation. We propose using a linear approximate Q-learning method in which human knowledge contributes to selecting useful yet simpl…
▽ More
In this paper, we present a synergic learning algorithm to address the task of indirect manipulation of an unknown deformable tissue. Tissue manipulation is a common yet challenging task in various surgical interventions, which makes it a good candidate for robotic automation. We propose using a linear approximate Q-learning method in which human knowledge contributes to selecting useful yet simple features of tissue manipulation while the algorithm learns to take optimal actions and accomplish the task. The algorithm is implemented and evaluated on a simulation using the OpenCV and CHAI3D libraries. Successful simulation results for four different configurations which are based on realistic tissue manipulation scenarios are presented. Results indicate that with a careful selection of relatively simple and intuitive features, the developed Q-learning algorithm can successfully learn an optimal policy without any prior knowledge of tissue dynamics or camera intrinsic/extrinsic calibration parameters.
△ Less
Submitted 11 October, 2019; v1 submitted 8 October, 2019;
originally announced October 2019.
-
Deposition of MAX phase containing thin films from a (Ti,Zr)2AlC compound target
Authors:
Clio Azina,
Bensu Tunca,
Andrejs Petruhins,
Binbin Xin,
Melike Yildizhan,
Per O. Å. Persson,
Jozef Vleugels,
Konstantina Lambrinou,
Johanna Rosén,
Per Eklund
Abstract:
This work reports on sputter depositions carried out from a compound (Ti,Zr)2AlC target, whereupon Al-containing (Ti,Zr)C thin films (30-40 nm in thickness) were deposited on MgO(111) and Al2O3(0001) substrates at temperatures ranging between 500 and 900 °C. The presence of Al within the carbide structure was evidenced by lattice parameter variations. Furthermore, chemical analyses showed that the…
▽ More
This work reports on sputter depositions carried out from a compound (Ti,Zr)2AlC target, whereupon Al-containing (Ti,Zr)C thin films (30-40 nm in thickness) were deposited on MgO(111) and Al2O3(0001) substrates at temperatures ranging between 500 and 900 °C. The presence of Al within the carbide structure was evidenced by lattice parameter variations. Furthermore, chemical analyses showed that the Al distribution throughout the film thickness was fairly homogeneous. Thicker films (80-90 nm) deposited from the same compound target consisted of the pseudo-binary (Ti,Zr)C and intermetallic compounds in the Ti-Zr-Al system up to 800 °C, as well as solid solution MAX phases with different Ti:Zr ratios at 900 °C. X-ray diffraction and transmission electron microscopy showed that both (Ti,Zr)2AlC and (Ti,Zr)3AlC2 solid solution MAX phases were formed. Moreover, this work discusses the growth mechanism of the thicker films, which started with the formation of the mixed (Ti,Zr)C carbide, followed by the nucleation and growth of aluminides, eventually leading to the formation of the MAX phases, which was the primary objective of the sputter depositions.
△ Less
Submitted 12 August, 2020; v1 submitted 9 September, 2019;
originally announced September 2019.
-
Improving Dynamic Range of Speckle Correlation based Optical Lever by spatial multiplexing
Authors:
Vijayakumar Anand,
Shanti Bhattacharya,
Joseph Rosen
Abstract:
Speckle correlation based optical levers SC OptLev possess attractive characteristics suitable for sensing small changes in the angular orientations of surfaces. In this study, we propose and demonstrate a spatial multiplexing technique for improving the dynamic range of SC OptLev. When the surface is in its initial position, a synthetic speckle intensity pattern, larger than the area of the image…
▽ More
Speckle correlation based optical levers SC OptLev possess attractive characteristics suitable for sensing small changes in the angular orientations of surfaces. In this study, we propose and demonstrate a spatial multiplexing technique for improving the dynamic range of SC OptLev. When the surface is in its initial position, a synthetic speckle intensity pattern, larger than the area of the image sensor is created by transversely shifting the image sensor and recording different sections of a larger speckle pattern. Then, the acquired images are stitched together by a computer program into one relatively large synthetic speckle pattern. Following the calibration stage, the synthetic speckle intensity pattern is used to sense changes in the surfaces angular orientation. The surface is monitored in realtime by recording part of the speckle pattern which lies within the sensor area. Next, the recorded speckle pattern is a cross correlated with the synthetic speckle pattern in the computer. The resulting shift of the correlation peak indicates the angular orientations of the reflective surface under test. This spatial multiplexing technique enables sensing changes in the angular orientation of the surface beyond the limit imposed by the physical size of the image sensor.
△ Less
Submitted 30 August, 2019;
originally announced September 2019.
-
Asymptotic properties of permanental sequences
Authors:
Michael B. Marcus,
Jay Rosen
Abstract:
Let $U=\{U_{j,k},j,k\in \overline {\mathbb N}\}$ be the potential of a transient symmetric Borel right process $X$ with state space $\overline {\mathbb N}$. For any excessive function $f=\{f_{k,k\in \overline {\mathbb N}}\}$ for $X$ , $\widetilde U=\{\widetilde U_{j,k},j,k\in\overline {\mathbb N}\}$, where \begin{equation}
\widetilde U_{j,k}= U_{j,k} +f_{ k},\qquad j,k\in\overline {\mathbb N},\l…
▽ More
Let $U=\{U_{j,k},j,k\in \overline {\mathbb N}\}$ be the potential of a transient symmetric Borel right process $X$ with state space $\overline {\mathbb N}$. For any excessive function $f=\{f_{k,k\in \overline {\mathbb N}}\}$ for $X$ , $\widetilde U=\{\widetilde U_{j,k},j,k\in\overline {\mathbb N}\}$, where \begin{equation}
\widetilde U_{j,k}= U_{j,k} +f_{ k},\qquad j,k\in\overline {\mathbb N},\label{a.1}
\end{equation} is the kernel of an $α$-permanental sequence $\widetilde X_α=(\widetilde X_{α, 1} ,\ldots)$ for all $α>0$. The symmetric potential $U$ is also the covariance of a mean zero Gaussian sequence
$η=\{η_{j},j\in \overline {\mathbb N}\}$.
Conditions are given on the potentials $U$ and excessive functions $f$ under which, \begin{equation} \limsup_{j\to \infty}\frac{ η_{j}}{( 2\,φ_{j})^{1/2} }=1 \quad a.s. \quad \implies \quad \limsup_{n\to \infty}\frac{\widetilde X_{α, j}}{φ_{j} }=1\quad a.s.,\label{a.2}
\end{equation} for all $α>0$, and sequences $φ=\{φ_{j}\}$ such that $f_{j}=o(φ_{j})$.
The function $φ$ is determined by $U$. Many examples are given in which $U$ is the potential of symmetric birth and death processes with and without emigration, first and higher order Gaussian autoregressive sequences and Lévy processes on $\mathbf Z$.
△ Less
Submitted 12 August, 2019;
originally announced August 2019.
-
Raven: Open Surgical Robotic Platforms
Authors:
Yangming Li,
Blake Hannaford,
Jacob Rosen
Abstract:
The Raven I and the Raven II surgical robots, as open research platforms, have been serving the robotic surgery research community for ten years. The paper 1) briefly presents the Raven I and the Raven II robots, 2) reviews the recent publications that are built upon the Raven robots, aim to be applied to the Raven robots, or are directly compared with the Raven robots, and 3) uses the Raven robot…
▽ More
The Raven I and the Raven II surgical robots, as open research platforms, have been serving the robotic surgery research community for ten years. The paper 1) briefly presents the Raven I and the Raven II robots, 2) reviews the recent publications that are built upon the Raven robots, aim to be applied to the Raven robots, or are directly compared with the Raven robots, and 3) uses the Raven robots as a case study to discuss the popular research problems in the research community and the trend of robotic surgery study. Instead of being a thorough literature review, this work only reviews the works formally published in the past three years and uses these recent publications to analyze the research interests, the popular open research problems, and opportunities in the topic of robotic surgery.
△ Less
Submitted 27 June, 2019;
originally announced June 2019.
-
Limit law for the cover time of a random walk on a binary tree
Authors:
Amir Dembo,
Jay Rosen,
Ofer Zeitouni
Abstract:
Let $T_n$ denote the binary tree of depth $n$ augmented by an extra edge connected to its root. Let $C_n$ denote the cover time of $T_n$ by simple random walk. We prove that $\sqrt{ \mathcal{C}_{n} 2^{-(n+1) } } - m_n$ converges in distribution as $n\to \infty$, where $m_n$ is an explicit constant, and identify the limit.
Let $T_n$ denote the binary tree of depth $n$ augmented by an extra edge connected to its root. Let $C_n$ denote the cover time of $T_n$ by simple random walk. We prove that $\sqrt{ \mathcal{C}_{n} 2^{-(n+1) } } - m_n$ converges in distribution as $n\to \infty$, where $m_n$ is an explicit constant, and identify the limit.
△ Less
Submitted 17 June, 2019;
originally announced June 2019.
-
Anomalous Charge Noise in Superconducting Qubits
Authors:
B. G. Christensen,
C. D. Wilen,
A. Opremcak,
J. Nelson,
F. Schlenker,
C. H. Zimonick,
L. Faoro,
L. B. Ioffe,
Y. J. Rosen,
J. L. DuBois,
B. L. T. Plourde,
R. McDermott
Abstract:
We have used Ramsey tomography to characterize charge noise in a weakly charge-sensitive superconducting qubit. We find a charge noise that scales with frequency as $1/f^α$ over 5 decades with $α= 1.93$ and a magnitude $S_q(\text{1Hz})= 2.9\times10^{-4}~e^2/\text{Hz}$. The noise exponent and magnitude of the low-frequency noise are much larger than those seen in prior work on single electron trans…
▽ More
We have used Ramsey tomography to characterize charge noise in a weakly charge-sensitive superconducting qubit. We find a charge noise that scales with frequency as $1/f^α$ over 5 decades with $α= 1.93$ and a magnitude $S_q(\text{1Hz})= 2.9\times10^{-4}~e^2/\text{Hz}$. The noise exponent and magnitude of the low-frequency noise are much larger than those seen in prior work on single electron transistors, yet are consistent with reports of frequency noise in other superconducting qubits. Moreover, we observe frequent large-amplitude jumps in offset charge exceeding 0.1$e$; these large discrete charge jumps are incompatible with a picture of localized dipole-like two-level fluctuators. The data reveal an unexpected dependence of charge noise on device scale and suggest models involving either charge drift or fluctuating patch potentials.
△ Less
Submitted 31 May, 2019;
originally announced May 2019.
-
SLM aided noninvasive imaging through thin scattering layers
Authors:
Saswata Mukherjee,
A. Vijayakumar,
Joseph Rosen
Abstract:
We propose and demonstrate a new imaging technique to noninvasively see through scattering layers with the aid of a spatial light modulator (SLM). A relay system projects the incoherent light pattern emitting from the scattering layer onto the SLM. Two coded phase masks are displayed, one after another, on the SLM to modulate the projected scattered field. Two corresponding intensity patterns are…
▽ More
We propose and demonstrate a new imaging technique to noninvasively see through scattering layers with the aid of a spatial light modulator (SLM). A relay system projects the incoherent light pattern emitting from the scattering layer onto the SLM. Two coded phase masks are displayed, one after another, on the SLM to modulate the projected scattered field. Two corresponding intensity patterns are recorded by a digital camera, and subtracted one from the other in the computer to obtain a bipolar matrix. A modified phase retrieval algorithm is used to retrieve the object information from this bipolar matrix.
△ Less
Submitted 29 May, 2019;
originally announced May 2019.
-
Implementation of a speckle correlation based optical lever (SC-OptLev) with extended dynamic range
Authors:
A. Vijayakumar,
D. Jayavel,
M. Muthaiah,
Shanti Bhattacharya,
Joseph Rosen
Abstract:
A speckle correlation based optical lever (SC-OptLev) is constructed for the measurement of small changes in the angle of orientation of a surface. The dynamic range of SC-OptLev is found to be twice that of a conventional OptLev for the same experimental configurations. Different filtering mechanisms are implemented and the correlation results are compared. Two types of computer automated SC-OptL…
▽ More
A speckle correlation based optical lever (SC-OptLev) is constructed for the measurement of small changes in the angle of orientation of a surface. The dynamic range of SC-OptLev is found to be twice that of a conventional OptLev for the same experimental configurations. Different filtering mechanisms are implemented and the correlation results are compared. Two types of computer automated SC-OptLevs, open source based computing system with a low-cost image sensor and a commercial computing system, are presented with assistive computational modules.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.
-
Protecting superconducting qubits from phonon mediated decay
Authors:
Yaniv J. Rosen,
Matthew Horsley,
Sara E. Harrison,
Eric T. Holland,
Allan S. Chang,
Tiziana Bond,
Jonathan L DuBois
Abstract:
For quantum computing to become fault tolerant, the underlying quantum bits must be effectively isolated from the noisy environment. It is well known that including an electromagnetic bandgap around the qubit operating frequency improves coherence for superconducting circuits. However, investigations of bandgaps to other environmental coupling mechanisms remain largely unexplored. Here we present…
▽ More
For quantum computing to become fault tolerant, the underlying quantum bits must be effectively isolated from the noisy environment. It is well known that including an electromagnetic bandgap around the qubit operating frequency improves coherence for superconducting circuits. However, investigations of bandgaps to other environmental coupling mechanisms remain largely unexplored. Here we present a method to enhance the coherence of superconducting circuits by introducing a phononic bandgap around the device operating frequency. The phononic bandgaps block resonant decay of defect states within the gapped frequency range, removing the electromagnetic coupling to phonons at the gap frequencies. We construct a multi-scale model that derives the decrease in the density of states due to the bandgap and the resulting increase in defect state $T_1$ times. We demonstrate that emission rates from in-plane defect states can be suppressed by up to two orders of magnitude. We combine these simulations with theory for resonators operated in the continuous-wave regime and show that improvements in quality factors are expected by up to the enhancement in defect $T_1$ times. Furthermore, we use full master equation simulation to demonstrate the suppression of qubit energy relaxation even when interacting with 200 defects states. We conclude with an exploration of device implementation including tradeoffs between fabrication complexity and qubit performance.
△ Less
Submitted 1 May, 2019; v1 submitted 14 March, 2019;
originally announced March 2019.
-
Binary square axicon with chiral focusing properties for optical trap**
Authors:
Balasubramani Vinoth,
Anand Vijayakumar,
Mani Ratnam Rai,
Joseph Rosen,
Chau-Jern Cheng,
Oleg V Minin,
Igor V Minin
Abstract:
We introduce a novel phase-only diffractive optical element called chiral binary square axicon (CBSA). The CBSA is designed by linearly rotating the square half-period zones of the binary square axicon with respect to one another. A quadratic phase mask (QPM) is combined with the CBSA using modulo-2π phase addition technique to bring the far-field intensity pattern of CBSA at the focal plane of th…
▽ More
We introduce a novel phase-only diffractive optical element called chiral binary square axicon (CBSA). The CBSA is designed by linearly rotating the square half-period zones of the binary square axicon with respect to one another. A quadratic phase mask (QPM) is combined with the CBSA using modulo-2π phase addition technique to bring the far-field intensity pattern of CBSA at the focal plane of the QPM and to introduce quasi-achromatic effects. The periodically rotated zones of CBSA produces a whirlpool phase profile and twisted intensity patterns at the focal plane of QPM. The degree of twisting seen in the intensity patterns is dependent upon the angular step size of rotation of the zones. The intensity pattern was found to rotate around the optical axis along the direction of propagation. The phase patterns of CBSA with different angles of zone rotation are displayed on a phase-only spatial light modulator and the experimental results were found to match with the simulation results. To evaluate the optical trap** capabilities of CBSA, an optical trap** experiment was carried out and the optical fields generated by CBSA were used for trap** and rotating yeast cells.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Autonomous Tissue Manipulation via Surgical Robot Using Learning Based Model Predictive Control
Authors:
Changyeob Shin,
Peter Walker Ferguson,
Sahba Aghajani Pedram,
Ji Ma,
Erik P. Dutson,
Jacob Rosen
Abstract:
Tissue manipulation is a frequently used fundamental subtask of any surgical procedures, and in some cases it may require the involvement of a surgeon's assistant. The complex dynamics of soft tissue as an unstructured environment is one of the main challenges in any attempt to automate the manipulation of it via a surgical robotic system. Two AI learning based model predictive control algorithms…
▽ More
Tissue manipulation is a frequently used fundamental subtask of any surgical procedures, and in some cases it may require the involvement of a surgeon's assistant. The complex dynamics of soft tissue as an unstructured environment is one of the main challenges in any attempt to automate the manipulation of it via a surgical robotic system. Two AI learning based model predictive control algorithms using vision strategies are proposed and studied: (1) reinforcement learning and (2) learning from demonstration. Comparison of the performance of these AI algorithms in a simulation setting indicated that the learning from demonstration algorithm can boost the learning policy by initializing the predicted dynamics with given demonstrations. Furthermore, the learning from demonstration algorithm is implemented on a Raven IV surgical robotic system and successfully demonstrated feasibility of the proposed algorithm using an experimental approach. This study is part of a profound vision in which the role of a surgeon will be redefined as a pure decision maker whereas the vast majority of the manipulation will be conducted autonomously by a surgical robotic system. A supplementary video can be found at: http://bionics.seas.ucla.edu/research/surgeryproject17.html
△ Less
Submitted 2 March, 2019; v1 submitted 4 February, 2019;
originally announced February 2019.
-
Tin+1Cn MXene with fully saturated and thermally stable Cl terminations
Authors:
J. Lu,
I. Persson,
H. Lind,
M. Li,
Y. Li,
K. Chen,
J. Zhou,
S. Du,
Z. Chai,
Z. Huang,
L. Hultman,
J. Rosen,
P. Eklund,
Q. Huang,
P. O. Å. Persson
Abstract:
MXenes are a rapidly growing family of 2D materials that exhibit a highly versatile structure and composition, allowing for significant tuning of the material properties. These properties are, however, ultimately limited by the surface terminations, which are typically a mixture of species, including F and O that are inherent to the MXene processing. Other and robust terminations are lacking. Here…
▽ More
MXenes are a rapidly growing family of 2D materials that exhibit a highly versatile structure and composition, allowing for significant tuning of the material properties. These properties are, however, ultimately limited by the surface terminations, which are typically a mixture of species, including F and O that are inherent to the MXene processing. Other and robust terminations are lacking. Here, we apply high-resolution scanning transmission electron microscopy (STEM), corresponding image simulations and first-principles calculations to investigate the surface terminations on MXenes synthesized from MAX phases through Lewis acidic melts. The results show that atomic Cl terminates the synthesized MXenes, with mere residual presence of other termination species. Furthermore, in situ STEM-electron energy loss spectroscopy (EELS) heating experiments show that the Cl terminations are stable up to 750 °C. Thus, we present an attractive new termination that widely expands the MXenes functionalization space and enable new applications.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
Element Replacement Approach by Reaction with Lewis Acidic Molten Salts to Synthesize Nanolaminated MAX Phases and MXenes
Authors:
Mian Li,
Jun Lu,
Kan Luo,
Youbing Li,
Keke Chang,
Ke Chen,
Jie Zhou,
Johanna Rosen,
Lars Hultman,
Per Eklund,
Per O. Å. Persson,
Shiyu Du,
Zhifang Chai,
Zhengren Huang,
Qing Huang
Abstract:
Nanolaminated materials are important because of their exceptional properties and wide range of applications. Here, we demonstrate a general approach to synthesize a series of Zn-based MAX phases and Cl-terminated MXenes originating from the replacement reaction between the MAX phase and the late transition metal halides. The approach is a top-down route that enables the late transitional element…
▽ More
Nanolaminated materials are important because of their exceptional properties and wide range of applications. Here, we demonstrate a general approach to synthesize a series of Zn-based MAX phases and Cl-terminated MXenes originating from the replacement reaction between the MAX phase and the late transition metal halides. The approach is a top-down route that enables the late transitional element atom (Zn in the present case) to occupy the A site in the pre-existing MAX phase structure. Using this replacement reaction between Zn element from molten ZnCl2 and Al element in MAX phase precursors (Ti3AlC2, Ti2AlC, Ti2AlN, and V2AlC), novel MAX phases Ti3ZnC2, Ti2ZnC, Ti2ZnN, and V2ZnC were synthesized. When employing excess ZnCl2, Cl terminated MXenes (such as Ti3C2Cl2 and Ti2CCl2) were derived by a subsequent exfoliation of Ti3ZnC2 and Ti2ZnC due to the strong Lewis acidity of molten ZnCl2. These results indicate that A-site element replacement in traditional MAX phases by late transition metal halides opens the door to explore MAX phases that are not thermodynamically stable at high temperature and would be difficult to synthesize through the commonly employed powder metallurgy approach. In addition, this is the first time that exclusively Cl-terminated MXenes were obtained, and the etching effect of Lewis acid in molten salts provides a green and viable route to prepare MXenes through an HF-free chemical approach.
△ Less
Submitted 15 March, 2019; v1 submitted 15 January, 2019;
originally announced January 2019.
-
Optimal Needle Diameter, Shape, and Path in Autonomous Suturing
Authors:
S. Aghajani Pedram,
P. Ferguson,
J. Ma,
E. Dutson,
J. Rosen
Abstract:
Needle shape, diameter, and path are critical parameters that directly affect suture depth and tissue trauma in autonomous suturing. This paper presents an optimization-based approach to specify these parameters. Given clinical suturing guidelines, a kinematic model of needle-tissue interaction was developed to quantify suture parameters and constraints. The model was further used to formulate con…
▽ More
Needle shape, diameter, and path are critical parameters that directly affect suture depth and tissue trauma in autonomous suturing. This paper presents an optimization-based approach to specify these parameters. Given clinical suturing guidelines, a kinematic model of needle-tissue interaction was developed to quantify suture parameters and constraints. The model was further used to formulate constant curvature needle path planning as a nonlinear optimization problem. The optimization results were confirmed experimentally with the Raven II surgical system. The proposed needle path planning algorithm guarantees minimal tissue trauma and complies with a wide range of suturing requirements.
△ Less
Submitted 14 January, 2019;
originally announced January 2019.