-
The XMM Cluster Survey: Automating the estimation of hydrostatic mass for large samples of galaxy clusters I -- Methodology, Validation, & Application to the SDSSRM-XCS sample
Authors:
D. J. Turner,
P. A. Giles,
A. K. Romer,
J. Pilling,
T. K. Lingard,
R. Wilkinson,
M. Hilton,
E. W. Upsdell,
R. Al-Serkal,
T. Cheng,
R. Eappen,
P. J. Rooney,
S. Bhargava,
C. A. Collins,
J. Mayers,
C. Miller,
R. C. Nichol,
M. Sahén,
P. T. P. Viana
Abstract:
We describe features of the X-ray: Generate and Analyse (XGA) open-source software package that have been developed to facilitate automated hydrostatic mass ($M_{\rm hydro}$) measurements from XMM X-ray observations of clusters of galaxies. This includes describing how XGA measures global, and radial, X-ray properties of galaxy clusters. We then demonstrate the reliability of XGA by comparing simp…
▽ More
We describe features of the X-ray: Generate and Analyse (XGA) open-source software package that have been developed to facilitate automated hydrostatic mass ($M_{\rm hydro}$) measurements from XMM X-ray observations of clusters of galaxies. This includes describing how XGA measures global, and radial, X-ray properties of galaxy clusters. We then demonstrate the reliability of XGA by comparing simple X-ray properties, namely the X-ray temperature and gas mass, with published values presented by the XMM Cluster Survey (XCS), the Ultimate XMM eXtragaLactic survey project (XXL), and the Local Cluster Substructure Survey (LoCuSS). XGA measured values for temperature are, on average, within 1% of the values reported in the literature for each sample. XGA gas masses for XXL clusters are shown to be ${\sim}$10% lower than previous measurements (though the difference is only significant at the $\sim$1.8$σ$ level), LoCuSS $R_{2500}$ and $R_{500}$ gas mass re-measurements are 3% and 7% lower respectively (representing a 1.5$σ$ and 3.5$σ$ difference). Like-for-like comparisons of hydrostatic mass are made to LoCuSS results, which show that our measurements are $10{\pm}3%$ ($19{\pm}7%$) higher for $R_{2500}$ ($R_{500}$). The comparison between $R_{500}$ masses shows significant scatter. Finally, we present new $M_{\rm hydro}$ measurements for 104 clusters from the SDSS DR8 redMaPPer XCS sample (SDSSRM-XCS). Our SDSSRM-XCS hydrostatic mass measurements are in good agreement with multiple literature estimates, and represent one of the largest samples of consistently measured hydrostatic masses. We have demonstrated that XGA is a powerful tool for X-ray analysis of clusters; it will render complex-to-measure X-ray properties accessible to non-specialists.
△ Less
Submitted 12 March, 2024;
originally announced March 2024.
-
Dark Energy Survey Year 3 Results: Mis-centering calibration and X-ray-richness scaling relations in redMaPPer clusters
Authors:
P. Kelly,
J. Jobel,
O. Eiger,
A. Abd,
T. E. Jeltema,
P. Giles,
D. L. Hollowood,
R. D. Wilkinson,
D. J. Turner,
S. Bhargava,
S. Everett,
A. Farahi,
A. K. Romer,
E. S. Rykoff,
F. Wang,
S. Bocquet,
D. Cross,
R. Faridjoo,
J. Franco,
G. Gardner,
M. Kwiecien,
D. Laubner,
A. McDaniel,
J. H. O'Donnell,
L. Sanchez
, et al. (54 additional authors not shown)
Abstract:
We use Dark Energy Survey Year 3 (DES Y3) clusters with archival X-ray data from XMM-Newton and Chandra to assess the centering performance of the redMaPPer cluster finder and to measure key richness observable scaling relations. In terms of centering, we find that 10-20% of redMaPPer clusters are miscentered with no significant difference in bins of low versus high richness ($20<λ<40$ and $λ>40$)…
▽ More
We use Dark Energy Survey Year 3 (DES Y3) clusters with archival X-ray data from XMM-Newton and Chandra to assess the centering performance of the redMaPPer cluster finder and to measure key richness observable scaling relations. In terms of centering, we find that 10-20% of redMaPPer clusters are miscentered with no significant difference in bins of low versus high richness ($20<λ<40$ and $λ>40$) or redshift ($0.2<z<0.4$ and $0.4 <z < 0.65$). We also investigate the richness bias induced by miscentering. The dominant reasons for miscentering include masked or missing data and the presence of other bright galaxies in the cluster; for half of the miscentered clusters the correct central was one of the other possible centrals identified by redMaPPer, while for $\sim 40$% of miscentered clusters the correct central is not a redMaPPer member with most of these cases due to masking. In addition, we fit the scaling relations between X-ray temperature and richness and between X-ray luminosity and richness. We find a T$_X$-$λ$ scatter of $0.21 \pm 0.01$. While the scatter in T$_X$-$λ$ is consistent in bins of redshift, we do find modestly different slopes with high-redshift clusters displaying a somewhat shallower relation. Splitting based on richness, we find a marginally larger scatter for our lowest richness bin, $20 < λ< 40$. The X-ray properties of detected, serendipitous clusters are generally consistent with those for targeted clusters, but the depth of the X-ray data for undetected clusters is insufficient to judge whether they are X-ray underluminous in all but one case.
△ Less
Submitted 19 October, 2023;
originally announced October 2023.
-
The XMM Cluster Survey: Exploring scaling relations and completeness of the Dark Energy Survey Year 3 redMaPPer cluster catalogue
Authors:
E. W. Upsdell,
P. A. Giles,
A. K. Romer,
R. Wilkinson,
D. J. Turner,
M. Hilton,
E. Rykoff,
A. Farahi,
S. Bhargava,
T. Jeltema,
M. Klein,
A. Bermeo,
C. A. Collins,
L. Ebrahimpour,
D. Hollowood,
R. G. Mann,
M. Manolopoulou,
C. J. Miller,
P. J. Rooney,
Martin Sahlén,
J. P. Stott,
P. T. P. Viana,
S. Allam,
O. Alves,
D. Bacon
, et al. (45 additional authors not shown)
Abstract:
We cross-match and compare characteristics of galaxy clusters identified in observations from two sky surveys using two completely different techniques. One sample is optically selected from the analysis of three years of Dark Energy Survey observations using the redMaPPer cluster detection algorithm. The second is X-ray selected from XMM observations analysed by the XMM Cluster Survey. The sample…
▽ More
We cross-match and compare characteristics of galaxy clusters identified in observations from two sky surveys using two completely different techniques. One sample is optically selected from the analysis of three years of Dark Energy Survey observations using the redMaPPer cluster detection algorithm. The second is X-ray selected from XMM observations analysed by the XMM Cluster Survey. The samples comprise a total area of 57.4 deg$^2$, bounded by the area of 4 contiguous XMM survey regions that overlap the DES footprint. We find that the X-ray selected sample is fully matched with entries in the redMaPPer catalogue, above $λ>$20 and within 0.1$< z <$0.9. Conversely, only 38\% of the redMaPPer catalogue is matched to an X-ray extended source. Next, using 120 optically clusters and 184 X-ray selected clusters, we investigate the form of the X-ray luminosity-temperature ($L_{X}-T_{X}$), luminosity-richness ($L_{X}-λ$) and temperature-richness ($T_{X}-λ$) scaling relations. We find that the fitted forms of the $L_{X}-T_{X}$ relations are consistent between the two selection methods and also with other studies in the literature. However, we find tentative evidence for a steepening of the slope of the relation for low richness systems in the X-ray selected sample. When considering the scaling of richness with X-ray properties, we again find consistency in the relations (i.e., $L_{X}-λ$ and $T_{X}-λ$) between the optical and X-ray selected samples. This is contrary to previous similar works that find a significant increase in the scatter of the luminosity scaling relation for X-ray selected samples compared to optically selected samples.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Wavelength-by-wavelength temperature-independent thermal radiation utilizing an insulator-metal transition
Authors:
Jonathan King,
Alireza Shahsafi,
Zhen Zhang,
Chenghao Wan,
Yuzhe Xiao,
Chengzi Huang,
Yifei Sun,
Patrick J. Roney,
Shriram Ramanathan,
Mikhail A. Kats
Abstract:
Both the magnitude and spectrum of the blackbody-radiation distribution change with temperature. Here, we designed the temperature-dependent spectral emissivity of a coating to counteract all the changes in the blackbody-radiation distribution over a certain temperature range, enabled by the nonhysteretic insulator-to-metal phase transition of SmNiO3. At each wavelength within the long-wave infrar…
▽ More
Both the magnitude and spectrum of the blackbody-radiation distribution change with temperature. Here, we designed the temperature-dependent spectral emissivity of a coating to counteract all the changes in the blackbody-radiation distribution over a certain temperature range, enabled by the nonhysteretic insulator-to-metal phase transition of SmNiO3. At each wavelength within the long-wave infrared atmospheric-transparency window, the thermal radiance of our coating remains nearly constant over a temperature range of at least 20 °C. Our approach can conceal thermal gradients and transient temperature changes from infrared imaging systems, including those that discriminate by wavelength, such as multispectral and hyperspectral cameras.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
The XMM Cluster Survey analysis of the SDSS DR8 redMaPPer Catalogue: Implications for scatter, selection bias, and isotropy in cluster scaling relations
Authors:
P. A. Giles,
A. K. Romer,
R. Wilkinson,
A. Bermeo,
D. J. Turner,
M. Hilton,
E. W. Upsdell,
P. J. Rooney,
S. Bhargava,
L. Ebrahimpour,
A. Farahi,
R. G. Mann,
M. Manolopoulou,
J. Mayers,
C. Vergara,
P. T. P. Viana,
C. A. Collins,
D. Hollowood,
T. Jeltema,
C. J. Miller,
R. C. Nichol,
R. Noorali,
M. Splettstoesser,
J. P. Stott
Abstract:
In this paper we present the X-ray analysis of SDSS DR8 redMaPPer (SDSSRM) clusters using data products from the $XMM$ Cluster Survey (XCS). In total, 1189 SDSSRM clusters fall within the $XMM$-Newton footprint. This has yielded 456 confirmed detections accompanied by X-ray luminosity ($L_{X}$) measurements. Of the detected clusters, 382 have an associated X-ray temperature measurement ($T_{X}$).…
▽ More
In this paper we present the X-ray analysis of SDSS DR8 redMaPPer (SDSSRM) clusters using data products from the $XMM$ Cluster Survey (XCS). In total, 1189 SDSSRM clusters fall within the $XMM$-Newton footprint. This has yielded 456 confirmed detections accompanied by X-ray luminosity ($L_{X}$) measurements. Of the detected clusters, 382 have an associated X-ray temperature measurement ($T_{X}$). This represents one of the largest samples of coherently derived cluster $T_{X}$ values to date. Our analysis of the X-ray observable to richness ($λ$) scaling relations has demonstrated that scatter in the $T_{X}-λ$ relation is roughly a third of that in the $L_{X}-λ$ relation, and that the $L_{X}-λ$ scatter is intrinsic, i.e. will not be significantly reduced with larger sample sizes. Our analysis of the scaling relation between $L_{X}$ and $T_{X}$ has shown that the fits are sensitive to the selection method of the sample, i.e. whether the sample is made up of clusters detected "serendipitously" compared to those deliberately targeted by $XMM$. These differences are also seen in the $L_{X}-λ$ relation and, to a lesser extent, in the $T_{X}-λ$ relation. Exclusion of the emission from the cluster core does not make a significant impact to the findings. A combination of selection biases is a likely, but as yet unproven, reason for these differences. Finally, we have also used our data to probe recent claims of anisotropy in the $L_{X}-T_{X}$ relation across the sky. We find no evidence of anistropy, but stress that this may be masked in our analysis by the incomplete declination coverage of the SDSS DR8 sample.
△ Less
Submitted 22 August, 2022; v1 submitted 22 February, 2022;
originally announced February 2022.
-
Velocity Dispersions of Clusters in the Dark Energy Survey Y3 redMaPPer Catalog
Authors:
V. Wetzell,
T. E. Jeltema,
B. Hegland,
S. Everett,
P. A. Giles,
R. Wilkinson,
A. Farahi,
M. Costanzi,
D. L. Hollowood,
E. Upsdell,
A. Saro,
J. Myles,
A. Bermeo,
S. Bhargava,
C. A. Collins,
D. Cross,
O. Eiger,
G. Gardner,
M. Hilton,
J. Jobel,
P. Kelly,
D. Laubner,
A. R. Liddle,
R. G. Mann,
V. Martinez
, et al. (74 additional authors not shown)
Abstract:
We measure the velocity dispersions of clusters of galaxies selected by the redMaPPer algorithm in the first three years of data from the Dark Energy Survey (DES), allowing us to probe cluster selection and richness estimation, $λ$, in light of cluster dynamics. Our sample consists of 126 clusters with sufficient spectroscopy for individual velocity dispersion estimates. We examine the correlation…
▽ More
We measure the velocity dispersions of clusters of galaxies selected by the redMaPPer algorithm in the first three years of data from the Dark Energy Survey (DES), allowing us to probe cluster selection and richness estimation, $λ$, in light of cluster dynamics. Our sample consists of 126 clusters with sufficient spectroscopy for individual velocity dispersion estimates. We examine the correlations between cluster velocity dispersion, richness, X-ray temperature and luminosity as well as central galaxy velocity offsets. The velocity dispersion-richness relation exhibits a bimodal distribution. The majority of clusters follow scaling relations between velocity dispersion, richness, and X-ray properties similar to those found for previous samples; however, there is a significant population of clusters with velocity dispersions which are high for their richness. These clusters account for roughly 22\% of the $λ< 70$ systems in our sample, but more than half (55\%) of $λ< 70$ clusters at $z>0.5$. A couple of these systems are hot and X-ray bright as expected for massive clusters with richnesses that appear to have been underestimated, but most appear to have high velocity dispersions for their X-ray properties likely due to line-of-sight structure. These results suggest that projection effects contribute significantly to redMaPPer selection, particularly at higher redshifts and lower richnesses. The redMaPPer determined richnesses for the velocity dispersion outliers are consistent with their X-ray properties, but several are X-ray undetected and deeper data is needed to understand their nature.
△ Less
Submitted 9 June, 2022; v1 submitted 15 July, 2021;
originally announced July 2021.
-
The XMM Cluster Survey: new evidence for the 3.5 keV feature in clusters is inconsistent with a dark matter origin
Authors:
S. Bhargava,
P. A. Giles,
A. K. Romer,
T. Jeltema,
J. Mayers,
A. Bermeo,
M. Hilton,
R. Wilkinson,
C. Vergara,
C. A. Collins,
M. Manolopoulou,
P. J. Rooney,
S. Rosborough,
K. Sabirli,
J. P. Stott,
E. Swann,
P. T. P. Viana
Abstract:
There have been several reports of a detection of an unexplained excess of X-ray emission at $\simeq$ 3.5 keV in astrophysical systems. One interpretation of this excess is the decay of sterile neutrino dark matter. The most influential study to date analysed 73 clusters observed by the XMM-Newton satellite. We explore evidence for a $\simeq$ 3.5 keV excess in the XMM-PN spectra of 117 redMaPPer g…
▽ More
There have been several reports of a detection of an unexplained excess of X-ray emission at $\simeq$ 3.5 keV in astrophysical systems. One interpretation of this excess is the decay of sterile neutrino dark matter. The most influential study to date analysed 73 clusters observed by the XMM-Newton satellite. We explore evidence for a $\simeq$ 3.5 keV excess in the XMM-PN spectra of 117 redMaPPer galaxy clusters ($0.1 < z < 0.6$). In our analysis of individual spectra, we identify three systems with an excess of flux at $\simeq$ 3.5 keV. In one case (XCS J0003.3+0204) this excess may result from a discrete emission line. None of these systems are the most dark matter dominated in our sample. We group the remaining 114 clusters into four temperature ($T_{\rm X}$) bins to search for an increase in $\simeq$ 3.5 keV flux excess with $T_{\rm X}$ - a reliable tracer of halo mass. However, we do not find evidence of a significant excess in flux at $\simeq$ 3.5 keV in any $T_{\rm X}$ bins. To maximise sensitivity to a potentially weak dark matter decay feature at $\simeq$ 3.5 keV, we jointly fit 114 clusters. Again, no significant excess is found at $\simeq$ 3.5 keV. We estimate the upper limit of an undetected emission line at $\simeq$ 3.5 keV to be $2.41 \times 10^{-6}$ photons cm$^{-2}$ s$^{-1}$, corresponding to a mixing angle of $\sin^2(2θ)=4.4 \times 10^{-11}$, lower than previous estimates from cluster studies. We conclude that a flux excess at $\simeq$ 3.5 keV is not a ubiquitous feature in clusters and therefore unlikely to originate from sterile neutrino dark matter decay.
△ Less
Submitted 13 July, 2020; v1 submitted 24 June, 2020;
originally announced June 2020.
-
Large magnetoelectric coupling in multiferroic oxide heterostructures assembled via epitaxial lift-off
Authors:
David Pesquera,
Ekaterina Khestanova,
Massimo Ghidini,
Sen Zhang,
Aidan P. Rooney,
Francesco Maccherozzi,
Patricia Riego,
Saeedeh Farokhipoor,
Jiyeob Kim,
Xavier Moya,
Mary E. Vickers,
Nadia A. Stelmashenko,
Sarah J. Haigh,
Sarnjeet S. Dhesi,
Neil D. Mathur
Abstract:
The strain dependent functional properties of epitaxial transition metal oxide films can be significantly modified via substrate selection. However, large lattice mismatches preclude dislocation-free epitaxial growth on ferroelectric substrates, whose strain states are modified by applied electric fields. Here we overcome this mismatch problem by depositing an epitaxial film of ferromagnetic La0.7…
▽ More
The strain dependent functional properties of epitaxial transition metal oxide films can be significantly modified via substrate selection. However, large lattice mismatches preclude dislocation-free epitaxial growth on ferroelectric substrates, whose strain states are modified by applied electric fields. Here we overcome this mismatch problem by depositing an epitaxial film of ferromagnetic La0.7Sr0.3MnO3 on a single crystal substrate of well lattice matched SrTiO3 via a film of SrRuO3 that we subsequently dissolved, permitting the transfer of unstrained La0.7Sr0.3MnO3 to a ferroelectric substrate of 0.68Pb(Mg1/3Nb2/3)O3 0.32PbTiO3 in a different crystallographic orientation. Ferroelectric domain switching, and a concomitant ferroelectric phase transition, produced large non volatile changes of magnetization that were mediated by magnetic domain rotations at locations defined by the microstructure - as revealed via high resolution vector maps of magnetization constructed from photoemission electron microscopy data, with contrast from x-ray magnetic circular dichroism. In future, our method may be exploited to control functional properties in dislocation free epitaxial films of any composition.
△ Less
Submitted 2 June, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
Dark Energy Survey Year 1 Results: Cosmological Constraints from Cluster Abundances and Weak Lensing
Authors:
DES Collaboration,
Tim Abbott,
Michel Aguena,
Alex Alarcon,
Sahar Allam,
Steve Allen,
James Annis,
Santiago Avila,
David Bacon,
Alberto Bermeo,
Gary Bernstein,
Emmanuel Bertin,
Sunayana Bhargava,
Sebastian Bocquet,
David Brooks,
Dillon Brout,
Elizabeth Buckley-Geer,
David Burke,
Aurelio Carnero Rosell,
Matias Carrasco Kind,
Jorge Carretero,
Francisco Javier Castander,
Ross Cawthon,
Chihway Chang,
Xinyi Chen
, et al. (107 additional authors not shown)
Abstract:
We perform a joint analysis of the counts and weak lensing signal of redMaPPer clusters selected from the Dark Energy Survey (DES) Year 1 dataset. Our analysis uses the same shear and source photometric redshifts estimates as were used in the DES combined probes analysis. Our analysis results in surprisingly low values for $S_8 =σ_8(Ω_{\rm m}/0.3)^{0.5}= 0.65\pm 0.04$, driven by a low matter densi…
▽ More
We perform a joint analysis of the counts and weak lensing signal of redMaPPer clusters selected from the Dark Energy Survey (DES) Year 1 dataset. Our analysis uses the same shear and source photometric redshifts estimates as were used in the DES combined probes analysis. Our analysis results in surprisingly low values for $S_8 =σ_8(Ω_{\rm m}/0.3)^{0.5}= 0.65\pm 0.04$, driven by a low matter density parameter, $Ω_{\rm m}=0.179^{+0.031}_{-0.038}$, with $σ_8-Ω_{\rm m}$ posteriors in $2.4σ$ tension with the DES Y1 3x2pt results, and in $5.6σ$ with the Planck CMB analysis. These results include the impact of post-unblinding changes to the analysis, which did not improve the level of consistency with other data sets compared to the results obtained at the unblinding. The fact that multiple cosmological probes (supernovae, baryon acoustic oscillations, cosmic shear, galaxy clustering and CMB anisotropies), and other galaxy cluster analyses all favor significantly higher matter densities suggests the presence of systematic errors in the data or an incomplete modeling of the relevant physics. Cross checks with X-ray and microwave data, as well as independent constraints on the observable--mass relation from SZ selected clusters, suggest that the discrepancy resides in our modeling of the weak lensing signal rather than the cluster abundance. Repeating our analysis using a higher richness threshold ($λ\ge 30$) significantly reduces the tension with other probes, and points to one or more richness-dependent effects not captured by our model.
△ Less
Submitted 25 February, 2020;
originally announced February 2020.
-
An empirical, Bayesian approach to modelling the impact of weather on crop yield: maize in the US
Authors:
Raphael Shirley,
Edward Pope,
Myles Bartlett,
Seb Oliver,
Novi Quadrianto,
Peter Hurley,
Steven Duivenvoorden,
Phil Rooney,
Adam B. Barrett,
Chris Kent,
James Bacon
Abstract:
We apply an empirical, data-driven approach for describing crop yield as a function of monthly temperature and precipitation by employing generative probabilistic models with parameters determined through Bayesian inference. Our approach is applied to state-scale maize yield and meteorological data for the US Corn Belt from 1981 to 2014 as an exemplar, but would be readily transferable to other cr…
▽ More
We apply an empirical, data-driven approach for describing crop yield as a function of monthly temperature and precipitation by employing generative probabilistic models with parameters determined through Bayesian inference. Our approach is applied to state-scale maize yield and meteorological data for the US Corn Belt from 1981 to 2014 as an exemplar, but would be readily transferable to other crops, locations and spatial scales. Experimentation with a number of models shows that maize growth rates can be characterised by a two-dimensional Gaussian function of temperature and precipitation with monthly contributions accumulated over the growing period. This approach accounts for non-linear growth responses to the individual meteorological variables, and allows for interactions between them. Our models correctly identify that temperature and precipitation have the largest impact on yield in the six months prior to the harvest, in agreement with the typical growing season for US maize (April to September). Maximal growth rates occur for monthly mean temperature 18-19$^\circ$C, corresponding to a daily maximum temperature of 24-25$^\circ$C (in broad agreement with previous work) and monthly total precipitation 115 mm. Our approach also provides a self-consistent way of investigating climate change impacts on current US maize varieties in the absence of adaptation measures. Kee** precipitation and growing area fixed, a temperature increase of $2^\circ$C, relative to 1981-2014, results in the mean yield decreasing by 8\%, while the yield variance increases by a factor of around 3. We thus provide a flexible, data-driven framework for exploring the impacts of natural climate variability and climate change on globally significant crops based on their observed behaviour. In concert with other approaches, this can help inform the development of adaptation strategies that will ensure food security under a changing climate.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
Electrically pumped WSe$_2$-based light-emitting van der Waals heterostructures embedded in monolithic dielectric microcavities
Authors:
O. Del Pozo-Zamudio,
A. Genco,
S. Schwarz,
F. Withers,
P. M. Walker,
T. Godde,
R. C. Schofield,
A. P. Rooney,
E. Prestat,
K. Watanabe,
T. Taniguchi,
C. Clark,
S. J. Haigh,
D. N. Krizhanovskii,
K. S. Novoselov,
A. I. Tartakovskii
Abstract:
Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integr…
▽ More
Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integration of an electroluminescent van der Waals heterostructure in a monolithic optical microcavity made of two high reflectivity dielectric distributed Bragg reflectors (DBRs). Owing to the presence of graphene and hexagonal boron nitride protecting the WSe$_2$ during the top mirror deposition, we fully preserve the optoelectronic behaviour of the device. Two bright cavity modes appear in the EL spectrum featuring Q-factors of 250 and 580 respectively: the first is attributed directly to the monolayer area, while the second is ascribed to the portion of emission guided outside the WSe$_2$ island. By embedding the EL device inside the microcavity structure, a significant modification of the directionality of the emitted light is achieved, with the peak intensity increasing by nearly two orders of magnitude at the angle of the maximum emission compared with the same EL device without the top DBR. Furthermore, the coupling of the WSe$_2$ EL to the cavity mode with a dispersion allows a tuning of the peak emission wavelength exceeding 35 nm (80 meV) by varying the angle at which the EL is observed from the microcavity. This work provides a route for the development of compact vertical-cavity surface-emitting devices based on van der Waals heterostructures.
△ Less
Submitted 4 June, 2020; v1 submitted 15 November, 2019;
originally announced November 2019.
-
Time-minimum control of quantum purity for 2-level Lindblad equations
Authors:
William Clark,
Anthony Bloch,
Leonardo Colombo,
Patrick Rooney
Abstract:
We study time-minimum optimal control for a class of quantum two-dimensional dissipative systems whose dynamics are governed by the Lindblad equation and where control inputs acts only in the Hamiltonian. The dynamics of the control system are analyzed as a bi-linear control system on the Bloch ball after a decoupling of such dynamics into intra- and inter-unitary orbits. The (singular) control pr…
▽ More
We study time-minimum optimal control for a class of quantum two-dimensional dissipative systems whose dynamics are governed by the Lindblad equation and where control inputs acts only in the Hamiltonian. The dynamics of the control system are analyzed as a bi-linear control system on the Bloch ball after a decoupling of such dynamics into intra- and inter-unitary orbits. The (singular) control problem consists of finding a trajectory of the state variables solving a radial equation in the minimum amount of time, starting at the completely mixed state and ending at the state with the maximum achievable purity.
The boundary value problem determined by the time-minimum singular optimal control problem is studied numerically. If controls are unbounded, simulations show that multiple local minimal solutions might exist. To find the unique globally minimal solution, we must repeat the algorithm for various initial conditions and find the best solution out of all of the candidates. If controls are bounded, optimal controls are given by bang-bang controls using the Pontryagin minimum principle. Using a switching map we construct optimal solutions consisting of singular arcs. If controls are bounded, the analysis of our model also implies classical analysis done previously for this problem.
△ Less
Submitted 20 April, 2019;
originally announced April 2019.
-
Stellar mass as a galaxy cluster mass proxy: application to the Dark Energy Survey redMaPPer clusters
Authors:
A. Palmese,
J. Annis,
J. Burgad,
A. Farahi,
M. Soares-Santos,
B. Welch,
M. da Silva Pereira,
H. Lin,
S. Bhargava,
D. L. Hollowood,
R. Wilkinson,
P. Giles,
T. Jeltema,
A. K. Romer,
A. E. Evrard,
M. Hilton,
C. Vergara Cervantes,
A. Bermeo,
J. Mayers,
J. DeRose,
D. Gruen,
W. G. Hartley,
O. Lahav,
B. Leistedt,
T. McClintock
, et al. (60 additional authors not shown)
Abstract:
We introduce a galaxy cluster mass observable, $μ_\star$, based on the stellar masses of cluster members, and we present results for the Dark Energy Survey (DES) Year 1 observations. Stellar masses are computed using a Bayesian Model Averaging method, and are validated for DES data using simulations and COSMOS data. We show that $μ_\star$ works as a promising mass proxy by comparing our prediction…
▽ More
We introduce a galaxy cluster mass observable, $μ_\star$, based on the stellar masses of cluster members, and we present results for the Dark Energy Survey (DES) Year 1 observations. Stellar masses are computed using a Bayesian Model Averaging method, and are validated for DES data using simulations and COSMOS data. We show that $μ_\star$ works as a promising mass proxy by comparing our predictions to X-ray measurements. We measure the X-ray temperature-$μ_\star$ relation for a total of 150 clusters matched between the wide-field DES Year 1 redMaPPer catalogue, and Chandra and XMM archival observations, spanning the redshift range $0.1<z<0.7$. For a scaling relation which is linear in logarithmic space, we find a slope of $α= 0.488\pm0.043$ and a scatter in the X-ray temperature at fixed $μ_\star$ of $σ_{{\rm ln} T_X|μ_\star}=0.266^{+0.019}_{-0.020}$ for the joint sample. By using the halo mass scaling relations of the X-ray temperature from the Weighing the Giants program, we further derive the $μ_\star$-conditioned scatter in mass, finding $σ_{{\rm ln} M|μ_\star}=0.26^{+ 0.15}_{- 0.10}$. These results are competitive with well-established cluster mass proxies used for cosmological analyses, showing that $μ_\star$ can be used as a reliable and physically motivated mass proxy to derive cosmological constraints.
△ Less
Submitted 18 November, 2019; v1 submitted 20 March, 2019;
originally announced March 2019.
-
Mass Variance from Archival X-ray Properties of Dark Energy Survey Year-1 Galaxy Clusters
Authors:
A. Farahi,
X. Chen,
A. E. Evrard,
D. L. Hollowood,
R. Wilkinson,
S. Bhargava,
P. Giles,
A. K. Romer,
T. Jeltema,
M. Hilton,
A. Bermeo,
J. Mayers,
C. Vergara Cervantes,
E. Rozo,
E. S. Rykoff,
C. Collins,
M. Costanzi,
S. Everett,
A. R. Liddle,
R. G. Mann,
A. Mantz,
P. Rooney,
M. Sahlen,
J. Stott,
P. T. P. Viana
, et al. (54 additional authors not shown)
Abstract:
Using archival X-ray observations and a log-normal population model, we estimate constraints on the intrinsic scatter in halo mass at fixed optical richness for a galaxy cluster sample identified in Dark Energy Survey Year-One (DES-Y1) data with the redMaPPer algorithm. We examine the scaling behavior of X-ray temperatures, $T_X$, with optical richness, $λ_{RM}$, for clusters in the redshift range…
▽ More
Using archival X-ray observations and a log-normal population model, we estimate constraints on the intrinsic scatter in halo mass at fixed optical richness for a galaxy cluster sample identified in Dark Energy Survey Year-One (DES-Y1) data with the redMaPPer algorithm. We examine the scaling behavior of X-ray temperatures, $T_X$, with optical richness, $λ_{RM}$, for clusters in the redshift range $0.2<z<0.7$. X-ray temperatures are obtained from Chandra and XMM observations for 58 and 110 redMaPPer systems, respectively. Despite non-uniform sky coverage, the $T_X$ measurements are $> 50\%$ complete for clusters with $λ_{RM} > 130$. Regression analysis on the two samples produces consistent posterior scaling parameters, from which we derive a combined constraint on the residual scatter, $σ_{\ln Tx | λ} = 0.275 \pm 0.019$. Joined with constraints for $T_X$ scaling with halo mass from the Weighing the Giants program and richness--temperature covariance estimates from the LoCuSS sample, we derive the richness-conditioned scatter in mass, $σ_{\ln M | λ} = 0.30 \pm 0.04\, _{({\rm stat})} \pm 0.09\, _{({\rm sys})}$, at an optical richness of approximately 70. Uncertainties in external parameters, particularly the slope and variance of the $T_X$--mass relation and the covariance of $T_X$ and $λ_{RM}$ at fixed mass, dominate the systematic error. The $95\%$ confidence region from joint sample analysis is relatively broad, $σ_{\ln M | λ} \in [0.14, \, 0.55]$, or a factor ten in variance.
△ Less
Submitted 19 March, 2019;
originally announced March 2019.
-
Temperature-independent thermal radiation
Authors:
Alireza Shahsafi,
Patrick Roney,
You Zhou,
Zhen Zhang,
Yuzhe Xiao,
Chenghao Wan,
Raymond Wambold,
Jad Salman,
Zhaoning Yu,
Jiarui Li,
Jerzy T. Sadowski,
Riccardo Comin,
Shriram Ramanathan,
Mikhail A. Kats
Abstract:
Thermal emission is the process by which all objects at non-zero temperatures emit light, and is well-described by the classic Planck, Kirchhoff, and Stefan-Boltzmann laws. For most solids, the thermally emitted power increases monotonically with temperature in a one-to-one relationship that enables applications such as infrared imaging and non-contact thermometry. Here, we demonstrate ultrathin t…
▽ More
Thermal emission is the process by which all objects at non-zero temperatures emit light, and is well-described by the classic Planck, Kirchhoff, and Stefan-Boltzmann laws. For most solids, the thermally emitted power increases monotonically with temperature in a one-to-one relationship that enables applications such as infrared imaging and non-contact thermometry. Here, we demonstrate ultrathin thermal emitters that violate this one-to-one relationship via the use of samarium nickel oxide (SmNiO3), a strongly correlated quantum material that undergoes a fully reversible, temperature-driven solid-state phase transition. The smooth and hysteresis-free nature of this unique insulator-to-metal (IMT) phase transition allows us to engineer the temperature dependence of emissivity to precisely cancel out the intrinsic blackbody profile described by the Stefan-Boltzmann law, for both heating and cooling. Our design results in temperature-independent thermally emitted power within the long-wave atmospheric transparency window (wavelengths of 8 - 14 um), across a broad temperature range of ~30 °C, centered around ~120 °C. The ability to decouple temperature and thermal emission opens a new gateway for controlling the visibility of objects to infrared cameras and, more broadly, new opportunities for quantum materials in controlling heat transfer.
△ Less
Submitted 19 September, 2019; v1 submitted 1 February, 2019;
originally announced February 2019.
-
Indirect to direct gap crossover in two-dimensional InSe revealed by ARPES
Authors:
Matthew Hamer,
Johanna Zultak,
Anastasia V. Tyurnina,
Viktor Zólyomi,
Daniel Terry,
Alexei Barinov,
Alistair Garner,
Jack Donoghue,
Aidan P. Rooney,
Viktor Kandyba,
Alessio Giampietri,
Abigail J. Graham,
Natalie C. Teutsch,
Xue Xia,
Maciej Koperski,
Sarah J. Haigh,
Vladimir I. Fal'ko,
Roman Gorbachev,
Neil R. Wilson
Abstract:
Atomically thin films of III-VI post-transition metal chalcogenides (InSe and GaSe) form an interesting class of two-dimensional semiconductor that feature strong variations of their band gap as a function of the number of layers in the crystal [1-4] and, specifically for InSe, an earlier predicted crossover from a direct gap in the bulk [5,6] to a weakly indirect band gap in monolayers and bilaye…
▽ More
Atomically thin films of III-VI post-transition metal chalcogenides (InSe and GaSe) form an interesting class of two-dimensional semiconductor that feature strong variations of their band gap as a function of the number of layers in the crystal [1-4] and, specifically for InSe, an earlier predicted crossover from a direct gap in the bulk [5,6] to a weakly indirect band gap in monolayers and bilayers [7-11]. Here, we apply angle resolved photoemission spectroscopy with submicrometer spatial resolution ($μ$ARPES) to visualise the layer-dependent valence band structure of mechanically exfoliated crystals of InSe. We show that for 1 layer and 2 layer InSe the valence band maxima are away from the $\mathbfΓ$-point, forming an indirect gap, with the conduction band edge known to be at the $\mathbfΓ$-point. In contrast, for six or more layers the bandgap becomes direct, in good agreement with theoretical predictions. The high-quality monolayer and bilayer samples enables us to resolve, in the photoluminescence spectra, the band-edge exciton (A) from the exciton (B) involving holes in a pair of deeper valence bands, degenerate at $\mathbfΓ$, with the splitting that agrees with both $μ$ARPES data and the results of DFT modelling. Due to the difference in symmetry between these two valence bands, light emitted by the A-exciton should be predominantly polarised perpendicular to the plane of the two-dimensional crystal, which we have verified for few-layer InSe crystals.
△ Less
Submitted 21 January, 2019;
originally announced January 2019.
-
Laser writable high-K dielectric for van der Waals nano-electronics
Authors:
N. Peimyoo,
M. D. Barnes,
J. D. Mehew,
A. De Sanctis,
I. Amit,
J. Escolar,
K. Anastasiou,
A. P. Rooney,
S. J. Haigh,
S. Russo,
M. F. Craciun,
F. Withers
Abstract:
Like silicon-based semiconductor devices, van der Waals heterostructures will require integration with high-K oxides. This is needed to achieve suitable voltage scaling, improved performance as well as allowing for added functionalities. Unfortunately, commonly used high-k oxide deposition methods are not directly compatible with 2D materials. Here we demonstrate a method to embed a multi-function…
▽ More
Like silicon-based semiconductor devices, van der Waals heterostructures will require integration with high-K oxides. This is needed to achieve suitable voltage scaling, improved performance as well as allowing for added functionalities. Unfortunately, commonly used high-k oxide deposition methods are not directly compatible with 2D materials. Here we demonstrate a method to embed a multi-functional few nm thick high-k oxide within van der Waals devices without degrading the properties of the neighbouring 2D materials. This is achieved by in-situ laser oxidation of embedded few layer HfS2 crystals. The resultant oxide is found to be in the amorphous phase with a dielectric constant of k~15 and break-down electric fields in the range of 0.5-0.6 V/nm. This transformation allows for the creation of a variety of fundamental nano-electronic and opto-electronic devices including, flexible Schottky barrier field effect transistors, dual gated graphene transistors as well as vertical light emitting and detecting tunnelling transistors. Furthermore, upon dielectric break-down, electrically conductive filaments are formed. This filamentation process can be used to electrically contact encapsulated conductive materials. Careful control of the filamentation process also allows for reversible switching between two resistance states. This allows for the creation of resistive switching random access memories (ReRAMs). We believe that this method of embedding a high-k oxide within complex van der Waals heterostructures could play an important role in future flexible multi-functional van der Waals devices.
△ Less
Submitted 12 November, 2018;
originally announced November 2018.
-
Trees, Forests, and Stationary States of Quantum Lindblad Systems
Authors:
Patrick Rooney,
Anthony M. Bloch,
Chitra Rangan
Abstract:
In this paper, we study the stationary orbits of quantum Lindblad systems. We show that they can be characterized in terms of trees and forests on a directed graph with edge weights that depend on the Lindblad operators and the eigenbasis of the density operator. For a certain class of typical Lindblad systems, this characterization can be used to find the asymptotic end-states. There is a unique…
▽ More
In this paper, we study the stationary orbits of quantum Lindblad systems. We show that they can be characterized in terms of trees and forests on a directed graph with edge weights that depend on the Lindblad operators and the eigenbasis of the density operator. For a certain class of typical Lindblad systems, this characterization can be used to find the asymptotic end-states. There is a unique end-state for each basin of the graph (the strongly connected components with no outgoing edges). In most cases, every asymptotic end-state must be a linear combination thereof, but we prove necessary and sufficient conditions under which symmetry in the Lindblad and Hamiltonian operators hide other end-states or stable oscillations between end-states.
△ Less
Submitted 25 October, 2018;
originally announced October 2018.
-
Magnetoresistance in Co-hBN-NiFe tunnel junctions enhanced by resonant tunneling through single defects in ultrathin hBN barriers
Authors:
Pablo U. Asshoff,
Jose L. Sambricio,
Sergey Slizovskiy,
Aidan P. Rooney,
Takashi Taniguchi,
Kenji Watanabe,
Sarah J. Haigh,
Vladimir Fal'ko,
Irina V. Grigorieva,
Ivan J. Vera-Marun
Abstract:
Hexagonal boron nitride (hBN) is a prototypical high-quality two-dimensional insulator and an ideal material to study tunneling phenomena, as it can be easily integrated in vertical van der Waals devices. For spintronic devices, its potential has been demonstrated both for efficient spin injection in lateral spin valves and as a barrier in magnetic tunnel junctions (MTJs). Here we reveal the effec…
▽ More
Hexagonal boron nitride (hBN) is a prototypical high-quality two-dimensional insulator and an ideal material to study tunneling phenomena, as it can be easily integrated in vertical van der Waals devices. For spintronic devices, its potential has been demonstrated both for efficient spin injection in lateral spin valves and as a barrier in magnetic tunnel junctions (MTJs). Here we reveal the effect of point defects inevitably present in mechanically exfoliated hBN on the tunnel magnetoresistance of Co-hBN-NiFe MTJs. We observe a clear enhancement of both the conductance and magnetoresistance of the junction at well-defined bias voltages, indicating resonant tunneling through magnetic (spin-polarized) defect states. The spin polarization of the defect states is attributed to exchange coupling of a paramagnetic impurity in the few-atomic-layer thick hBN to the ferromagnetic electrodes. This is confirmed by excellent agreement with theoretical modelling. Our findings should be taken into account in analyzing tunneling processes in hBN-based magnetic devices. More generally, our study shows the potential of using atomically thin hBN barriers with defects to engineer the magnetoresistance of MTJs and to achieve spin filtering, opening the door towards exploiting the spin degree of freedom in current studies of point defects as quantum emitters.
△ Less
Submitted 3 October, 2018;
originally announced October 2018.
-
Anomalous twin boundaries in 2D materials
Authors:
A. P. Rooney,
Z. Li,
W. Zhao,
A. Gholinia,
A. Kosikov,
G. Auton,
F. Ding,
R. V. Gorbachev,
R. J. Young,
S. J Haigh
Abstract:
The high mechanical strength and excellent flexibility of 2D materials such as graphene are some of their most important properties [1]. Good flexibility is key for exploiting 2D materials in many emerging technologies, such as wearable electronics, bioelectronics, protective coatings and composites [1] and recently bending has been suggested as a route to tune electronic transport behaviour [2].…
▽ More
The high mechanical strength and excellent flexibility of 2D materials such as graphene are some of their most important properties [1]. Good flexibility is key for exploiting 2D materials in many emerging technologies, such as wearable electronics, bioelectronics, protective coatings and composites [1] and recently bending has been suggested as a route to tune electronic transport behaviour [2]. For virtually all crystalline materials macroscopic deformation is accommodated by the movement of dislocations and through the formation of twinning defects [3]; it is the geometry of the resulting microstructure that largely determines the mechanical and electronic properties. Despite this, the atomic microstructure of 2D materials after mechanical deformation has not been widely investigated: only by understanding these deformed microstructures can the resulting properties be accurately predicted and controlled. In this paper we describe the different structural features that can form as a result of bending in van der Waals (vdW) crystals of 2D materials. We show that twin boundaries, an important class of crystal defect, are delocalised by several nm and not atomically sharp as has been assumed for over half a century [4]. In addition, we demonstrate that different classes of microstructure are present in the deformed material and can be predicted from just the atomic structure, bend angle, and flake thickness. We anticipate that this new knowledge of the deformation structure for 2D materials will provide foundations for tailoring transport behaviour[2], mechanical properties, liquid-phase [5,6] and scotch-tape exfoliation [7,8], and crystal growth.
△ Less
Submitted 1 September, 2018;
originally announced September 2018.
-
Chandra Follow-Up of the SDSS DR8 redMaPPer Catalog Using the MATCha Pipeline
Authors:
Devon L. Hollowood,
Tesla Jeltema,
Xinyi Chen,
Arya Farahi,
August Evrard,
Spencer Everett,
Eduardo Rozo,
Eli Rykoff,
Rebecca Bernstein,
Alberto Bermeo,
Lena Eiger,
Paul Giles,
Holger Israel,
Renee Michel,
Raziq Noorali,
Kathy Romer,
Philip Rooney,
Megan Splettstoesser
Abstract:
In order to place constraints on cosmology through optical surveys of galaxy clusters, one must first understand the properties of those clusters. To this end, we introduce the Mass Analysis Tool for Chandra (MATCha), a pipeline which uses a parallellized algorithm to analyze archival Chandra data. MATCha simultaneously calculates X-ray temperatures and luminosities and performs centering measurem…
▽ More
In order to place constraints on cosmology through optical surveys of galaxy clusters, one must first understand the properties of those clusters. To this end, we introduce the Mass Analysis Tool for Chandra (MATCha), a pipeline which uses a parallellized algorithm to analyze archival Chandra data. MATCha simultaneously calculates X-ray temperatures and luminosities and performs centering measurements for hundreds of potential galaxy clusters using archival X-ray exposures. We run MATCha on the redMaPPer SDSS DR8 cluster catalog and use MATCha's output X-ray temperatures and luminosities to analyze the galaxy cluster temperature-richness, luminosity-richness, luminosity-temperature, and temperature-luminosity scaling relations. We detect 447 clusters and determine 246 r2500 temperatures across all redshifts. Within 0.1 < z < 0.35 we find that r2500 Tx scales with optical richness as ln(kB Tx / 1.0 keV) = (0.52 \pm 0.05) ln(λ/70) + (1.85 \pm 0.03) with intrinsic scatter of 0.27 \pm 0.02 (1 σ). We investigate the distribution of offsets between the X-ray center and redMaPPer center within 0.1 < z < 0.35, finding that 68.3 \pm 6.5% of clusters are well-centered. However, we find a broad tail of large offsets in this distribution, and we explore some of the causes of redMaPPer miscentering.
△ Less
Submitted 13 August, 2019; v1 submitted 20 August, 2018;
originally announced August 2018.
-
Thermal-emission measurements near room temperature using Fourier-transform infrared spectroscopy
Authors:
Yuzhe Xiao,
Alireza Shahsafi,
Chenghao Wan,
Patrick J. Roney,
Graham Joe,
Zhaoning Yu,
Jad Salman,
Mikhail A. Kats
Abstract:
Accurate characterization of thermal emitters can be challenging due to the presence of background thermal emission from components of the experimental setup and the surrounding environment. This is especially true for an emitter operating close to room temperature. Here, we explore characterization of near-room-temperature thermal emitters using Fourier-transform infrared (FTIR) spectroscopy. We…
▽ More
Accurate characterization of thermal emitters can be challenging due to the presence of background thermal emission from components of the experimental setup and the surrounding environment. This is especially true for an emitter operating close to room temperature. Here, we explore characterization of near-room-temperature thermal emitters using Fourier-transform infrared (FTIR) spectroscopy. We find that the thermal background arising from optical components placed between the beam splitter and the detector in an FTIR spectrometer appears as a "negative" contribution to the Fourier-transformed signal, leading to errors in thermal-emission measurements near room temperature. Awareness of this contribution will help properly calibrate low-temperature thermal-emission measurements.
△ Less
Submitted 9 October, 2018; v1 submitted 19 July, 2018;
originally announced July 2018.
-
Ballistic molecular transport through two-dimensional channels
Authors:
A. Keerthi,
A. K. Geim,
A. Janardanan,
A. P. Rooney,
A. Esfandiar,
S. Hu,
S. A. Dar,
I. V. Grigorieva,
S. J. Haigh,
F. C. Wang,
B. Radha
Abstract:
Gas permeation through nanoscale pores is ubiquitous in nature and plays an important role in a plethora of technologies. Because the pore size is typically smaller than the mean free path of gas molecules, their flow is conventionally described by the Knudsen theory that assumes diffuse reflection (random-angle scattering) at confining walls. This assumption has proven to hold surprisingly well i…
▽ More
Gas permeation through nanoscale pores is ubiquitous in nature and plays an important role in a plethora of technologies. Because the pore size is typically smaller than the mean free path of gas molecules, their flow is conventionally described by the Knudsen theory that assumes diffuse reflection (random-angle scattering) at confining walls. This assumption has proven to hold surprisingly well in experiment, and only a few cases of partially specular (mirror-like) reflection are known. Here we report gas transport through angstrom-scale channels with atomically-flat walls and show that surface scattering can be both diffuse or specular, depending on fine details of the surface atomic landscape, and quantum effects contribute to the specularity at room temperature. The channels made from graphene or boron nitride allow a helium gas flow that is orders of magnitude faster than expected from the theory. This is explained by specular surface scattering, which leads to ballistic transport and frictionless gas flow. Similar channels but with molybdenum disulfide walls exhibit much slower permeation that remains well described by Knudsen diffusion. The difference is attributed to stronger atomic corrugations at MoS2 surfaces, which are similar in height to the size of transported atoms and their de Broglie wavelength. The importance of the latter, matter-wave contribution is corroborated by the observation of a reversed isotope effect in which the mass flow of hydrogen is notably higher than that of deuterium, in contrast to the relation expected for classical flows. Our results provide insights into atomistic details of molecular permeation, which so far could be accessed only in simulations, and show a possibility of studying gas transport under a controlled confinement comparable to the quantum-mechanical size of atoms.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
The ${\it XMM}$ Cluster Survey: joint modelling of the $L_{\rm X}-T$ scaling relation for clusters and groups of galaxies
Authors:
Leyla Ebrahimpour,
Pedro T. P. Viana,
Maria Manolopoulou,
Carlos Vergara-Cervantes,
A. Kathy Romer,
Sunayana Bhargava,
Paul Giles,
Alberto Bermeo-Hernandez,
Chris A. Collins,
Matt Hilton,
Ben Hoyle,
Andrew R. Liddle,
Robert G. Mann,
Julian A. Mayers,
Christopher J. Miller,
Robert C. Nichol,
Philip J. Rooney,
Martin Sahlén,
John P. Stott
Abstract:
We characterize the X-ray luminosity--temperature ($L_{\rm X}-T$) relation using a sample of 353 clusters and groups of galaxies with temperatures in excess of 1 keV, spanning the redshift range $0.1 < z < 0.6$, the largest ever assembled for this purpose. All systems are part of the ${\it XMM-Newton}$ Cluster Survey (XCS), and have also been independently identified in Sloan Digital Sky Survey (S…
▽ More
We characterize the X-ray luminosity--temperature ($L_{\rm X}-T$) relation using a sample of 353 clusters and groups of galaxies with temperatures in excess of 1 keV, spanning the redshift range $0.1 < z < 0.6$, the largest ever assembled for this purpose. All systems are part of the ${\it XMM-Newton}$ Cluster Survey (XCS), and have also been independently identified in Sloan Digital Sky Survey (SDSS) data using the redMaPPer algorithm. We allow for redshift evolution of the normalisation and intrinsic scatter of the $L_{\rm X}-T$ relation, as well as, for the first time, the possibility of a temperature-dependent change-point in the exponent of such relation. However, we do not find strong statistical support for deviations from the usual modelling of the $L_{\rm X}-T$ relation as a single power-law, where the normalisation evolves self-similarly and the scatter remains constant with time. Nevertheless, assuming {\it a priori} the existence of the type of deviations considered, then faster evolution than the self-similar expectation for the normalisation of the $L_{\rm X}-T$ relation is favoured, as well as a decrease with redshift in the scatter about the $L_{\rm X}-T$ relation. Further, the preferred location for a change-point is then close to 2 keV, possibly marking the transition between the group and cluster regimes. Our results also indicate an increase in the power-law exponent of the $L_{\rm X}-T$ relation when moving from the group to the cluster regime, and faster evolution in the former with respect to the later, driving the temperature-dependent change-point towards higher values with redshift.
△ Less
Submitted 9 May, 2018;
originally announced May 2018.
-
Mid-infrared optics using dielectrics with refractive indices below unity
Authors:
Alireza Shahsafi,
Yuzhe Xiao,
Jad Salman,
Bradley S. Gundlach,
Chenghao Wan,
Patrick J. Roney,
Mikhail A. Kats
Abstract:
Conventional transparent materials at optical frequencies have refractive index values (n) greater than unity -- most commonly between about 1 and 4. This paper explores optical phenomena made possible by using materials with refractive indices less than unity. We focus primarily on fused silica (SiO2), a polar dielectric with strong phonon resonances in the mid infrared that result in a spectral…
▽ More
Conventional transparent materials at optical frequencies have refractive index values (n) greater than unity -- most commonly between about 1 and 4. This paper explores optical phenomena made possible by using materials with refractive indices less than unity. We focus primarily on fused silica (SiO2), a polar dielectric with strong phonon resonances in the mid infrared that result in a spectral region in which n < 1 with modest optical loss. Using this ubiquitous easy-to-deposit material, we demonstrate infrared-frequency external reflection, frustrated external reflection, and direct coupling to surface plasmon polaritons from free space. Our work suggests that materials with refractive indices below unity can bring significant new functionality to optical devices.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
Correlations between X-ray properties and Black Hole Mass in AGN: towards a new method to estimate black hole mass from short exposure X-ray observations
Authors:
Julian A. Mayers,
Kathy Romer,
Arya Fahari,
John P. Stott,
Paul Giles,
Philip J. Rooney,
A. Bermeo-Hernandez,
Chris A. Collins,
Matt Hilton,
Ben Hoyle,
Andrew R. Liddle,
Robert G. Mann,
Christopher J. Miller,
Robert C. Nichol,
Martin Sahlén,
C. Vergara-Cervantes,
Pedro T. P. Viana
Abstract:
Several investigations of the X-ray variability of active galactic nuclei (AGN) using the normalised excess variance (${σ^2_{\rm NXS}}$) parameter have shown that variability has a strong anti-correlation with black hole mass ($M_{\rm BH}$) and X-ray luminosity ($L_{\rm X}$). In this study we confirm these previous correlations and find no evidence of a redshift evolution. Using observations from…
▽ More
Several investigations of the X-ray variability of active galactic nuclei (AGN) using the normalised excess variance (${σ^2_{\rm NXS}}$) parameter have shown that variability has a strong anti-correlation with black hole mass ($M_{\rm BH}$) and X-ray luminosity ($L_{\rm X}$). In this study we confirm these previous correlations and find no evidence of a redshift evolution. Using observations from XMM-Newton, we determine the ${σ^2_{\rm NXS}}$ and $L_{\rm X}$ for a sample of 1091 AGN drawn from the XMM-Newton Cluster Survey (XCS) - making this the largest study of X-ray spectral properties of AGNs. We created light-curves in three time-scales; 10 ks, 20 ks and 40 ks and used these to derive scaling relations between ${σ^2_{\rm NXS}}$, $L_{\rm X}$ (2.0-10 keV range) and literature estimates of $M_{\rm BH}$ from reverberation map**. We confirm the anti-correlation between $M_{\rm BH}$ and ${σ^2_{\rm NXS}}$ and find a positive correlation between $M_{\rm BH}$ and $L_{\rm X}$. The use of ${σ^2_{\rm NXS}}$ is practical only for pointed observations where the observation time is tens of kiloseconds. For much shorter observations one cannot accurately quantify variability to estimate $M_{\rm BH}$. Here we describe a method to derive $L_{\rm X}$ from short duration observations and used these results as an estimate for $M_{\rm BH}$. We find that it is possible to estimate $L_{\rm X}$ from observations of just a few hundred seconds and that when correlated with $M_{\rm BH}$, the relation is statistically similar to the relation of $M_{\rm BH}$-$L_{\rm X}$ derived from a spectroscopic analysis of full XMM observations. This method may be particularly useful to the eROSITA mission, an all-sky survey, which will detect $>$10$^{6}$ AGN.
△ Less
Submitted 12 April, 2019; v1 submitted 19 March, 2018;
originally announced March 2018.
-
Limiting optical diodes enabled by the phase transition of vanadium dioxide
Authors:
Chenghao Wan,
Erik Horak,
Jonathan King,
Jad Salman,
Zhen Zhang,
You Zhou,
Patrick Roney,
Bradley Gundlach,
Shriram Ramanathan,
Randall Goldsmith,
Mikhail A. Kats
Abstract:
A limiting optical diode is an asymmetric nonlinear device that is bidirectionally transparent at low power, but becomes opaque when illuminated by sufficiently intense light incident from a particular direction. We explore the use of a phase-transition material, vanadium dioxide (VO2), as an active element of limiting optical diodes. The VO2 phase transition can be triggered by optical absorption…
▽ More
A limiting optical diode is an asymmetric nonlinear device that is bidirectionally transparent at low power, but becomes opaque when illuminated by sufficiently intense light incident from a particular direction. We explore the use of a phase-transition material, vanadium dioxide (VO2), as an active element of limiting optical diodes. The VO2 phase transition can be triggered by optical absorption, resulting in a change in refractive index orders of magnitude larger than what can be achieved with conventional nonlinearities. As a result, a limiting optical diode based on incident-direction-dependent absorption in a VO2 layer can be very thin, and can function at low powers without field enhancement, resulting in broadband operation. We demonstrate a simple thin-film limiting optical diode comprising a transparent substrate, a VO2 film, and a semi-transparent metallic layer. For sufficiently high incident intensity, our proof-of-concept device realizes broadband asymmetric transmission across the near infrared, and is approximately ten times thinner than the free-space wavelength.
△ Less
Submitted 20 January, 2018;
originally announced January 2018.
-
The Dark Energy Survey Data Release 1
Authors:
T. M. C. Abbott,
F. B. Abdalla,
S. Allam,
A. Amara,
J. Annis,
J. Asorey,
S. Avila,
O. Ballester,
M. Banerji,
W. Barkhouse,
L. Baruah,
M. Baumer,
K. Bechtol,
M . R. Becker,
A. Benoit-Lévy,
G. M. Bernstein,
E. Bertin,
J. Blazek,
S. Bocquet,
D. Brooks,
D. Brout,
E. Buckley-Geer,
D. L. Burke,
V. Busti,
R. Campisano
, et al. (177 additional authors not shown)
Abstract:
We describe the first public data release of the Dark Energy Survey, DES DR1, consisting of reduced single epoch images, coadded images, coadded source catalogs, and associated products and services assembled over the first three years of DES science operations. DES DR1 is based on optical/near-infrared imaging from 345 distinct nights (August 2013 to February 2016) by the Dark Energy Camera mount…
▽ More
We describe the first public data release of the Dark Energy Survey, DES DR1, consisting of reduced single epoch images, coadded images, coadded source catalogs, and associated products and services assembled over the first three years of DES science operations. DES DR1 is based on optical/near-infrared imaging from 345 distinct nights (August 2013 to February 2016) by the Dark Energy Camera mounted on the 4-m Blanco telescope at Cerro Tololo Inter-American Observatory in Chile. We release data from the DES wide-area survey covering ~5,000 sq. deg. of the southern Galactic cap in five broad photometric bands, grizY. DES DR1 has a median delivered point-spread function of g = 1.12, r = 0.96, i = 0.88, z = 0.84, and Y = 0.90 arcsec FWHM, a photometric precision of < 1% in all bands, and an astrometric precision of 151 mas. The median coadded catalog depth for a 1.95" diameter aperture at S/N = 10 is g = 24.33, r = 24.08, i = 23.44, z = 22.69, and Y = 21.44 mag. DES DR1 includes nearly 400M distinct astronomical objects detected in ~10,000 coadd tiles of size 0.534 sq. deg. produced from ~39,000 individual exposures. Benchmark galaxy and stellar samples contain ~310M and ~ 80M objects, respectively, following a basic object quality selection. These data are accessible through a range of interfaces, including query web clients, image cutout servers, jupyter notebooks, and an interactive coadd image visualization tool. DES DR1 constitutes the largest photometric data set to date at the achieved depth and photometric precision.
△ Less
Submitted 23 April, 2019; v1 submitted 9 January, 2018;
originally announced January 2018.
-
Galaxies in X-ray Selected Clusters and Groups in Dark Energy Survey Data II: Hierarchical Bayesian Modeling of the Red-Sequence Galaxy Luminosity Function
Authors:
Y. Zhang,
C. J. Miller,
P. Rooney,
A. Bermeo,
A. K. Romer,
C. Vergara cervantes,
E. S. Rykoff,
C. Hennig,
R. Das,
T. Mckay,
J. Song,
H. Wilcox,
D. Bacon,
S. L. Bridle,
C. Collins,
C. Conselice,
M. Hilton,
B. Hoyle,
S. Kay,
A. R. Liddle,
R. G. Mann,
N. Mehrtens,
J. Mayers,
R. C. Nichol,
M. Sahlen
, et al. (55 additional authors not shown)
Abstract:
Using $\sim 100$ X-ray selected clusters in the Dark Energy Survey Science Verification data, we constrain the luminosity function (LF) of cluster red sequence galaxies as a function of redshift. This is the first homogeneous optical/X-ray sample large enough to constrain the evolution of the luminosity function simultaneously in redshift ($0.1<z<1.05$) and cluster mass (…
▽ More
Using $\sim 100$ X-ray selected clusters in the Dark Energy Survey Science Verification data, we constrain the luminosity function (LF) of cluster red sequence galaxies as a function of redshift. This is the first homogeneous optical/X-ray sample large enough to constrain the evolution of the luminosity function simultaneously in redshift ($0.1<z<1.05$) and cluster mass ($13.5 \le \rm{log_{10}}(M_{200crit}) \sim< 15.0$). We pay particular attention to completeness issues and the detection limit of the galaxy sample. We then apply a hierarchical Bayesian model to fit the cluster galaxy LFs via a Schecter function, including its characteristic break ($m^*$) to a faint end power-law slope ($α$). Our method enables us to avoid known issues in similar analyses based on stacking or binning the clusters. We find weak and statistically insignificant ($\sim 1.9 σ$) evolution in the faint end slope $α$ versus redshift. We also find no dependence in $α$ or $m^*$ with the X-ray inferred cluster masses. However, the amplitude of the LF as a function of cluster mass is constrained to $\sim 20\%$ precision. As a by-product of our algorithm, we utilize the correlation between the LF and cluster mass to provide an improved estimate of the individual cluster masses as well as the scatter in true mass given the X-ray inferred masses. This technique can be applied to a larger sample of X-ray or optically selected clusters from the Dark Energy Survey, significantly improving the sensitivity of the analysis.
△ Less
Submitted 29 June, 2019; v1 submitted 16 October, 2017;
originally announced October 2017.
-
Observing imperfection in atomic interfaces for van der Waals heterostructures
Authors:
Aidan. P. Rooney,
Aleksey Kozikov,
Alexander N. Rudenko,
Eric Prestat,
Matthew J Hamer,
Freddie Withers,
Yang Cao,
Kostya S. Novoselov,
Mikhail I. Katsnelson,
Roman Gorbachev,
Sarah J. Haigh
Abstract:
Vertically stacked van der Waals heterostructures are a lucrative platform for exploring the rich electronic and optoelectronic phenomena in two-dimensional materials. Their performance will be strongly affected by impurities and defects at the interfaces. Here we present the first systematic study of interfaces in van der Waals heterostructure using cross sectional scanning transmission electron…
▽ More
Vertically stacked van der Waals heterostructures are a lucrative platform for exploring the rich electronic and optoelectronic phenomena in two-dimensional materials. Their performance will be strongly affected by impurities and defects at the interfaces. Here we present the first systematic study of interfaces in van der Waals heterostructure using cross sectional scanning transmission electron microscope (STEM) imaging. By measuring interlayer separations and comparing these to density functional theory (DFT) calculations we find that pristine interfaces exist between hBN and MoS2 or WS2 for stacks prepared by mechanical exfoliation in air. However, for two technologically important transition metal dichalcogenide (TMDC) systems, MoSe2 and WSe2, our measurement of interlayer separations provide the first evidence for impurity species being trapped at buried interfaces with hBN: interfaces which are flat at the nanometer length scale. While decreasing the thickness of encapsulated WSe2 from bulk to monolayer we see a systematic increase in the interlayer separation. We attribute these differences to the thinnest TMDC flakes being flexible and hence able to deform mechanically around a sparse population of protruding interfacial impurities. We show that the air sensitive two dimensional (2D) crystal NbSe2 can be fabricated into heterostructures with pristine interfaces by processing in an inert-gas environment. Finally we find that adopting glove-box transfer significantly improves the quality of interfaces for WSe2 compared to processing in air.
△ Less
Submitted 25 July, 2017;
originally announced July 2017.
-
Optimal Control of Quantum Purity for $n=2$ Systems
Authors:
William Clark,
Anthony Bloch,
Leonardo Colombo,
Patrick Rooney
Abstract:
The objective of this work is to study time-minimum and energy-minimum global optimal control for dissipative open quantum systems whose dynamics is governed by the Lindblad equation. The controls appear only in the Hamiltonian.
Using recent results regarding the decoupling of such dissipative dynamics into intra- and inter-unitary orbits, we transform the control system into a bi-linear control…
▽ More
The objective of this work is to study time-minimum and energy-minimum global optimal control for dissipative open quantum systems whose dynamics is governed by the Lindblad equation. The controls appear only in the Hamiltonian.
Using recent results regarding the decoupling of such dissipative dynamics into intra- and inter-unitary orbits, we transform the control system into a bi-linear control system on the Bloch ball (the unitary sphere together with its interior). We then design a numerical algorithm to construct an optimal path to achieve a desired point given initial states close to the origin (the singular point) of the Bloch ball. This is done both for the minimum-time and minimum -energy control problems.
△ Less
Submitted 14 March, 2017;
originally announced March 2017.
-
Phase segregation facilitates exfoliation of franckeite crystals to a single unit cell thickness
Authors:
Matěj Velický,
Peter S. Toth,
Alexander M. Rakowski,
Aidan P. Rooney,
Aleksey Kozikov,
Artem Mishchenko,
Colin R. Woods,
Thanasis Georgiou,
Sarah J. Haigh,
Kostya S. Novoselov,
Robert A. W. Dryfe
Abstract:
Weak interlayer van der Waals interactions in bulk crystals facilitate their mechanical exfoliation to monolayer and few-layer two-dimensional (2D) materials, which exhibit striking physical phenomena absent in their bulk form. Here we study a 2D form of a mineral franckeite and show that phase segregation into discrete layers at the sub-nanometre scale facilitates its layered structure and basal…
▽ More
Weak interlayer van der Waals interactions in bulk crystals facilitate their mechanical exfoliation to monolayer and few-layer two-dimensional (2D) materials, which exhibit striking physical phenomena absent in their bulk form. Here we study a 2D form of a mineral franckeite and show that phase segregation into discrete layers at the sub-nanometre scale facilitates its layered structure and basal cleavage. This behaviour is likely to be common in a wider family of complex crystals and could be exploited for a single-step synthesis of van der Waals heterostructures, as an alternative to stacking of 2D materials. Mechanical exfoliation allowed us to produce crystals down to a single unit cell thickness and rationalise its basal cleavage by atomic-resolution scanning transmission electron microscopy (STEM). We demonstrate p-type electrical conductivity and remarkable electrochemical properties in exfoliated crystals, which shows promise for energy storage applications.
△ Less
Submitted 8 December, 2016;
originally announced December 2016.
-
Magnetoresistance of vertical Co-graphene-NiFe junctions controlled by charge transfer and proximity-induced spin splitting in graphene
Authors:
P. U. Asshoff,
J. L. Sambricio,
A. P. Rooney,
S. Slizovskiy,
A. Mishchenko,
A. M. Rakowski,
E. W. Hill,
A. K. Geim,
S. J. Haigh,
V. I. Fal'ko,
I. J. Vera-Marun,
I. V. Grigorieva
Abstract:
Graphene is hailed as an ideal material for spintronics due to weak intrinsic spin-orbit interaction that facilitates lateral spin transport and tunability of its electronic properties, including a possibility to induce magnetism in graphene. Another promising application of graphene is related to its use as a spacer separating ferromagnetic metals (FMs) in vertical magnetoresistive devices, the m…
▽ More
Graphene is hailed as an ideal material for spintronics due to weak intrinsic spin-orbit interaction that facilitates lateral spin transport and tunability of its electronic properties, including a possibility to induce magnetism in graphene. Another promising application of graphene is related to its use as a spacer separating ferromagnetic metals (FMs) in vertical magnetoresistive devices, the most prominent class of spintronic devices widely used as magnetic sensors. In particular, few-layer graphene was predicted to act as a perfect spin filter. Here we show that the role of graphene in such devices (at least in the absence of epitaxial alignment between graphene and the FMs) is different and determined by proximity-induced spin splitting and charge transfer with adjacent ferromagnetic metals, making graphene a weak FM electrode rather than a spin filter. To this end, we report observations of magnetoresistance (MR) in vertical Co-graphene-NiFe junctions with 1 to 4 graphene layers separating the ferromagnets, and demonstrate that the dependence of the MR sign on the number of layers and its inversion at relatively small bias voltages is consistent with spin transport between weakly doped and differently spin-polarized layers of graphene. The proposed interpretation is supported by the observation of an MR sign reversal in biased Co-graphene-hBN-NiFe devices and by comprehensive structural characterization. Our results suggest a new architecture for vertical devices with electrically controlled MR.
△ Less
Submitted 16 June, 2017; v1 submitted 4 July, 2016;
originally announced July 2016.
-
Molecular transport through capillaries made with atomic-scale precision
Authors:
B. Radha,
A. Esfandiar,
F. C. Wang,
A. P. Rooney,
K. Gopinadhan,
A. Keerthi,
A. Mishchenko,
A. Janardanan,
P. Blake,
L. Fumagalli,
M. Lozada-Hidalgo,
S. Garaj,
S. J. Haigh,
I. V. Grigorieva,
H. A. Wu,
A. K. Geim
Abstract:
Nanometre-scale pores and capillaries have long been studied because of their importance in many natural phenomena and their use in numerous applications. A more recent development is the ability to fabricate artificial capillaries with nanometre dimensions, which has enabled new research on molecular transport and led to the emergence of nanofluidics. But surface roughness in particular makes it…
▽ More
Nanometre-scale pores and capillaries have long been studied because of their importance in many natural phenomena and their use in numerous applications. A more recent development is the ability to fabricate artificial capillaries with nanometre dimensions, which has enabled new research on molecular transport and led to the emergence of nanofluidics. But surface roughness in particular makes it challenging to produce capillaries with precisely controlled dimensions at this spatial scale. Here we report the fabrication of narrow and smooth capillaries through van der Waals assembly, with atomically flat sheets at the top and bottom separated by spacers made of two-dimensional crystals with a precisely controlled number of layers. We use graphene and its multilayers as archetypal two-dimensional materials to demonstrate this technology, which produces structures that can be viewed as if individual atomic planes had been removed from a bulk crystal to leave behind flat voids of a height chosen with atomic-scale precision. Water transport through the channels, ranging in height from one to several dozen atomic planes, is characterized by unexpectedly fast flow (up to 1 metre per second) that we attribute to high capillary pressures (about 1,000 bar) and large slip lengths. For channels that accommodate only a few layers of water, the flow exhibits a marked enhancement that we associate with an increased structural order in nanoconfined water. Our work opens up an avenue to making capillaries and cavities with sizes tunable to ångström precision, and with permeation properties further controlled through a wide choice of atomically flat materials available for channel walls.
△ Less
Submitted 8 September, 2016; v1 submitted 29 June, 2016;
originally announced June 2016.
-
The Evolution of Active Galactic Nuclei in Clusters of Galaxies from the Dark Energy Survey
Authors:
E. Bufanda,
D. Hollowood,
T. E. Jeltema,
E. S. Rykoff,
E. Rozo,
P. Martini,
T. M. C. Abbott,
F. B. Abdalla,
S. Allam,
M. Banerji,
A. Benoit-Levy,
E. Bertin,
D. Brooks,
A. Carnero Rosell,
M. Carrasco Kind,
J. Carretero,
C. E. Cunha,
L. N. da Costa,
S. Desai,
H. T. Diehl,
J. P. Dietrich,
A. E. Evrard,
A. Fausti Neto,
B. Flaugher,
J. Frieman
, et al. (31 additional authors not shown)
Abstract:
The correlation between active galactic nuclei (AGN) and environment provides important clues to AGN fueling and the relationship of black hole growth to galaxy evolution. In this paper, we analyze the fraction of galaxies in clusters hosting AGN as a function of redshift and cluster richness for X-ray detected AGN associated with clusters of galaxies in Dark Energy Survey (DES) Science Verificati…
▽ More
The correlation between active galactic nuclei (AGN) and environment provides important clues to AGN fueling and the relationship of black hole growth to galaxy evolution. In this paper, we analyze the fraction of galaxies in clusters hosting AGN as a function of redshift and cluster richness for X-ray detected AGN associated with clusters of galaxies in Dark Energy Survey (DES) Science Verification data. The present sample includes 33 AGN with L_X > 10^43 ergs s^-1 in non-central, host galaxies with luminosity greater than 0.5 L* from a total sample of 432 clusters in the redshift range of 0.1<z<0.95. Analysis of the present sample reveals that the AGN fraction in red-sequence cluster members has a strong positive correlation with redshift such that the AGN fraction increases by a factor of ~8 from low to high redshift, and the fraction of cluster galaxies hosting AGN at high redshifts is greater than the low-redshift fraction at 3.6 sigma. In particular, the AGN fraction increases steeply at the highest redshifts in our sample at z>0.7. This result is in good agreement with previous work and parallels the increase in star formation in cluster galaxies over the same redshift range. However, the AGN fraction in clusters is observed to have no significant correlation with cluster mass. Future analyses with DES Year 1 through Year 3 data will be able to clarify whether AGN activity is correlated to cluster mass and will tightly constrain the relationship between cluster AGN populations and redshift.
△ Less
Submitted 3 November, 2016; v1 submitted 21 June, 2016;
originally announced June 2016.
-
Flag-based Control of Orbit Dynamics in Quantum Lindblad Systems
Authors:
Patrick Rooney,
Anthony M. Bloch,
C. Rangan
Abstract:
In this paper, we demonstrate that the dynamics of an $n$-dimensional Lindblad control system can be separated into its inter- and intra-orbit dynamics when there is fast controllability. This can be viewed as a control system on the simplex of density operator spectra, where the flag representing the eigenspaces is viewed as a control variable. The local controllability properties of this control…
▽ More
In this paper, we demonstrate that the dynamics of an $n$-dimensional Lindblad control system can be separated into its inter- and intra-orbit dynamics when there is fast controllability. This can be viewed as a control system on the simplex of density operator spectra, where the flag representing the eigenspaces is viewed as a control variable. The local controllability properties of this control system can be analyzed when the control-set of flags is limited to a finite subset. In particular, there is a natural finite subset of $n!$ flags that are effective for low-purity orbits.
△ Less
Submitted 19 February, 2016;
originally announced February 2016.
-
Flag-Based Control of Quantum Purity for $n=2$ Systems
Authors:
Patrick Rooney,
Anthony M. Bloch,
C. Rangan
Abstract:
This paper investigates the fast Hamiltonian control of $n=2$ density operators by continuously varying the flag as one moves away from the completely mixed state. In general, the critical points and zeros of the purity derivative can only be solved analytically in the limit of minimal purity. We derive differential equations that maintain these features as the purity increases. In particular, the…
▽ More
This paper investigates the fast Hamiltonian control of $n=2$ density operators by continuously varying the flag as one moves away from the completely mixed state. In general, the critical points and zeros of the purity derivative can only be solved analytically in the limit of minimal purity. We derive differential equations that maintain these features as the purity increases. In particular, there is a thread of points in the Bloch ball that locally maximizes the purity derivative, and a corresponding thread that minimizes it. Additionally, we show there is a closed surface of points inside of which the purity derivative is positive, and inside of which is negative. We argue that this approach may be useful in studying higher-dimensional systems.
△ Less
Submitted 15 February, 2016; v1 submitted 4 February, 2016;
originally announced February 2016.
-
The redMaPPer Galaxy Cluster Catalog From DES Science Verification Data
Authors:
E. S. Rykoff,
E. Rozo,
D. Hollowood,
A. Bermeo-Hernandez,
T. Jeltema,
J. Mayers,
A. K. Romer,
P. Rooney,
A. Saro,
C. Vergara Cervantes,
R. H. Wechsler,
H. Wilcox,
T. M. C. Abbott,
F. B. Abdalla,
S. Allam,
J. Annis,
A. Benoit-Lévy,
G. M. Bernstein,
E. Bertin,
D. Brooks,
D. L. Burke,
D. Capozzi,
A. Carnero Rosell,
M. Carrasco Kind,
F. J. Castander
, et al. (64 additional authors not shown)
Abstract:
We describe updates to the \redmapper{} algorithm, a photometric red-sequence cluster finder specifically designed for large photometric surveys. The updated algorithm is applied to $150\,\mathrm{deg}^2$ of Science Verification (SV) data from the Dark Energy Survey (DES), and to the Sloan Digital Sky Survey (SDSS) DR8 photometric data set. The DES SV catalog is locally volume limited, and contains…
▽ More
We describe updates to the \redmapper{} algorithm, a photometric red-sequence cluster finder specifically designed for large photometric surveys. The updated algorithm is applied to $150\,\mathrm{deg}^2$ of Science Verification (SV) data from the Dark Energy Survey (DES), and to the Sloan Digital Sky Survey (SDSS) DR8 photometric data set. The DES SV catalog is locally volume limited, and contains 786 clusters with richness $λ>20$ (roughly equivalent to $M_{\rm{500c}}\gtrsim10^{14}\,h_{70}^{-1}\,M_{\odot}$) and $0.2<z<0.9$. The DR8 catalog consists of 26311 clusters with $0.08<z<0.6$, with a sharply increasing richness threshold as a function of redshift for $z\gtrsim 0.35$. The photometric redshift performance of both catalogs is shown to be excellent, with photometric redshift uncertainties controlled at the $σ_z/(1+z)\sim 0.01$ level for $z\lesssim0.7$, rising to $\sim0.02$ at $z\sim0.9$ in DES SV. We make use of \emph{Chandra} and \emph{XMM} X-ray and South Pole Telescope Sunyaev-Zeldovich data to show that the centering performance and mass--richness scatter are consistent with expectations based on prior runs of \redmapper{} on SDSS data. We also show how the \redmapper{} \photoz{} and richness estimates are relatively insensitive to imperfect star/galaxy separation and small-scale star masks.
△ Less
Submitted 25 May, 2016; v1 submitted 4 January, 2016;
originally announced January 2016.
-
The XMM Cluster Survey: The Halo Occupation Number of BOSS galaxies in X-ray clusters
Authors:
Nicola Mehrtens,
A. Kathy Romer,
Robert C. Nichol,
Chris A. Collins,
Martin Sahlen,
Philip J. Rooney,
Julian A. Mayers,
A. Bermeo-Hernandez,
Martyn Bristow,
Diego Capozzi,
L. Christodoulou,
Johan Comparat,
Matt Hilton,
Ben Hoyle,
Scott T. Kay,
Andrew R. Liddle,
Robert G. Mann,
Karen Masters,
Christopher J. Miller,
John K. Parejko,
Francisco Prada,
Ashley J. Ross,
Donald P. Schneider,
John P. Stott,
Alina Streblyanska
, et al. (4 additional authors not shown)
Abstract:
We present a direct measurement of the mean halo occupation distribution (HOD) of galaxies taken from the eleventh data release (DR11) of the Sloan Digital Sky Survey-III Baryon Oscillation Spectroscopic Survey (BOSS). The HOD of BOSS low-redshift (LOWZ: $0.2 < z < 0.4$) and Constant-Mass (CMASS: $0.43 <z <0.7$) galaxies is inferred via their association with the dark-matter halos of 174 X-ray-sel…
▽ More
We present a direct measurement of the mean halo occupation distribution (HOD) of galaxies taken from the eleventh data release (DR11) of the Sloan Digital Sky Survey-III Baryon Oscillation Spectroscopic Survey (BOSS). The HOD of BOSS low-redshift (LOWZ: $0.2 < z < 0.4$) and Constant-Mass (CMASS: $0.43 <z <0.7$) galaxies is inferred via their association with the dark-matter halos of 174 X-ray-selected galaxy clusters drawn from the XMM Cluster Survey (XCS). Halo masses are determined for each galaxy cluster based on X-ray temperature measurements, and range between ${\rm log_{10}} (M_{180}/M_{\odot}) = 13-15$. Our directly measured HODs are consistent with the HOD-model fits inferred via the galaxy-clustering analyses of Parejko et al. for the BOSS LOWZ sample and White et al. for the BOSS CMASS sample. Under the simplifying assumption that the other parameters that describe the HOD hold the values measured by these authors, we have determined a best-fit alpha-index of 0.91$\pm$0.08 and $1.27^{+0.03}_{-0.04}$ for the CMASS and LOWZ HOD, respectively. These alpha-index values are consistent with those measured by White et al. and Parejko et al. In summary, our study provides independent support for the HOD models assumed during the development of the BOSS mock-galaxy catalogues that have subsequently been used to derive BOSS cosmological constraints.
△ Less
Submitted 11 October, 2016; v1 submitted 10 December, 2015;
originally announced December 2015.
-
The XMM Cluster Survey: evolution of the velocity dispersion -- temperature relation over half a Hubble time
Authors:
Susan Wilson,
Matt Hilton,
Philip J. Rooney,
Caroline Caldwell,
Scott T. Kay,
Chris A. Collins,
Ian G. McCarthy,
A. Kathy Romer,
Alberto Bermeo-Hernandez,
Rebecca Bernstein,
Luiz da Costa,
Daniel Gifford,
Devon Hollowood,
Ben Hoyle,
Tesla Jeltema,
Andrew R. Liddle,
Marcio A. G Maia,
Robert G. Mann,
Julian A. Mayers,
Nicola Mehrtens,
Christopher J. Miller,
Robert C. Nichol,
Ricardo Ogando,
Martin Sahlén,
Benjamin Stahl
, et al. (4 additional authors not shown)
Abstract:
We measure the evolution of the velocity dispersion--temperature ($σ_{\rm v}$--$T_{\rm X}$) relation up to $z = 1$ using a sample of 38 galaxy clusters drawn from the \textit{XMM} Cluster Survey. This work improves upon previous studies by the use of a homogeneous cluster sample and in terms of the number of high redshift clusters included. We present here new redshift and velocity dispersion meas…
▽ More
We measure the evolution of the velocity dispersion--temperature ($σ_{\rm v}$--$T_{\rm X}$) relation up to $z = 1$ using a sample of 38 galaxy clusters drawn from the \textit{XMM} Cluster Survey. This work improves upon previous studies by the use of a homogeneous cluster sample and in terms of the number of high redshift clusters included. We present here new redshift and velocity dispersion measurements for 12 $z > 0.5$ clusters observed with the GMOS instruments on the Gemini telescopes. Using an orthogonal regression method, we find that the slope of the relation is steeper than that expected if clusters were self-similar, and that the evolution of the normalisation is slightly negative, but not significantly different from zero ($σ_{\rm v} \propto T^{0.86 \pm 0.14} E(z)^{-0.37 \pm 0.33}$). We verify our results by applying our methods to cosmological hydrodynamical simulations. The lack of evolution seen in our data is consistent with simulations that include both feedback and radiative cooling.
△ Less
Submitted 3 August, 2016; v1 submitted 9 December, 2015;
originally announced December 2015.
-
WSe2 light-emitting tunneling transistors with enhanced brightness at room temperature
Authors:
F. Withers,
O. Del Pozo-Zamudio,
S. Schwarz,
S. Dufferwiel,
P. M. Walker,
T. Godde,
A. P. Rooney,
A. Gholinia,
C. R. Woods,
P. Blake,
S. J. Haigh,
K. Watanabe,
T. Taniguchi,
I. L. Aleiner,
A. K. Geim,
V. I. Falko,
A. I. Tartakovskii,
K. S. Novoselov
Abstract:
Monolayers of molybdenum and tungsten dichalcogenides are direct bandgap semiconductors, which makes them promising for opto-electronic applications. In particular, van der Waals heterostructures consisting of monolayers of MoS2 sandwiched between atomically thin hexagonal boron nitride (hBN) and graphene electrodes allows one to obtain light emitting quantum wells (LEQWs) with low-temperature ext…
▽ More
Monolayers of molybdenum and tungsten dichalcogenides are direct bandgap semiconductors, which makes them promising for opto-electronic applications. In particular, van der Waals heterostructures consisting of monolayers of MoS2 sandwiched between atomically thin hexagonal boron nitride (hBN) and graphene electrodes allows one to obtain light emitting quantum wells (LEQWs) with low-temperature external quantum efficiency (EQE) of 1%. However, the EQE of MoS2 and MoSe2-based LEQWs shows behavior common for many other materials: it decreases fast from cryogenic conditions to room temperature, undermining their practical applications. Here we compare MoSe2 and WSe2 LEQWs. We show that the EQE of WSe2 devices grows with temperature, with room temperature EQE reaching 5%, which is 250x more than the previous best performance of MoS2 and MoSe2 quantum wells in ambient conditions. We attribute such a different temperature dependences to the inverted sign of spin-orbit splitting of conduction band states in tungsten and molybdenum dichalcogenides, which makes the lowest-energy exciton in WSe2 dark.
△ Less
Submitted 19 November, 2015;
originally announced November 2015.
-
The XMM Cluster Survey: Testing chameleon gravity using the profiles of clusters
Authors:
Harry Wilcox,
David Bacon,
Robert C. Nichol,
Philip J. Rooney,
Ayumu Terukina,
A. Kathy Romer,
Kazuya Koyama,
Gong-Bo Zhao,
Ross Hood,
Robert G. Mann,
Matt Hilton,
Maria Manolopoulou,
Martin Sahlen,
Chris A. Collins,
Andrew R. Liddle,
Julian A. Mayers,
Nicola Mehrtens,
Christopher J. Miller,
John P. Stott,
Pedro T. P. Viana
Abstract:
The chameleon gravity model postulates the existence of a scalar field that couples with matter to mediate a fifth force. If it exists, this fifth force would influence the hot X-ray emitting gas filling the potential wells of galaxy clusters. However, it would not influence the clusters' weak lensing signal. Therefore, by comparing X-ray and weak lensing profiles, one can place upper limits on th…
▽ More
The chameleon gravity model postulates the existence of a scalar field that couples with matter to mediate a fifth force. If it exists, this fifth force would influence the hot X-ray emitting gas filling the potential wells of galaxy clusters. However, it would not influence the clusters' weak lensing signal. Therefore, by comparing X-ray and weak lensing profiles, one can place upper limits on the strength of a fifth force. This technique has been attempted before using a single, nearby cluster (Coma, $z=0.02$). Here we apply the technique to the stacked profiles of 58 clusters at higher redshifts ($0.1<z<1.2$), including 12 new to the literature, using X-ray data from the XMM Cluster Survey (XCS) and weak lensing data from the Canada France Hawaii Telescope Lensing Survey (CFHTLenS). Using a multi-parameter MCMC analysis, we constrain the two chameleon gravity parameters ($β$ and $φ_{\infty}$). Our fits are consistent with general relativity, not requiring a fifth force. In the special case of $f(R)$ gravity (where $β= \sqrt{1/6}$), we set an upper limit on the background field amplitude today of $|f_{\rm{R0}}| < 6 \times 10^{-5}$ (95% CL). This is one of the strongest constraints to date on $|f_{\rm{R0}}|$ on cosmological scales. We hope to improve this constraint in future by extending the study to hundreds of clusters using data from the Dark Energy Survey.
△ Less
Submitted 15 July, 2015; v1 submitted 15 April, 2015;
originally announced April 2015.
-
OzDES multi-fibre spectroscopy for the Dark Energy Survey: first-year operation and results
Authors:
Fang Yuan,
C. Lidman,
T. M. Davis,
M. Childress,
F. B. Abdalla,
M. Banerji,
E. Buckley-Geer,
A. Carnero Rosell,
D. Carollo,
F. J. Castander,
C. B. D'Andrea,
H. T. Diehl,
C. E Cunha,
R. J. Foley,
J. Frieman,
K. Glazebrook,
J. Gschwend,
S. Hinton,
S. Jouvel,
R. Kessler,
A. G. Kim,
A. L. King,
K. Kuehn,
S. Kuhlmann,
G. F. Lewis
, et al. (77 additional authors not shown)
Abstract:
OzDES is a five-year, 100-night, spectroscopic survey on the Anglo-Australian Telescope, whose primary aim is to measure redshifts of approximately 2,500 Type Ia supernovae host galaxies over the redshift range 0.1 < z < 1.2, and derive reverberation-mapped black hole masses for approximately 500 active galactic nuclei and quasars over 0.3 < z < 4.5. This treasure trove of data forms a major part…
▽ More
OzDES is a five-year, 100-night, spectroscopic survey on the Anglo-Australian Telescope, whose primary aim is to measure redshifts of approximately 2,500 Type Ia supernovae host galaxies over the redshift range 0.1 < z < 1.2, and derive reverberation-mapped black hole masses for approximately 500 active galactic nuclei and quasars over 0.3 < z < 4.5. This treasure trove of data forms a major part of the spectroscopic follow-up for the Dark Energy Survey for which we are also targeting cluster galaxies, radio galaxies, strong lenses, and unidentified transients, as well as measuring luminous red galaxies and emission line galaxies to help calibrate photometric redshifts.
Here we present an overview of the OzDES program and our first-year results. Between Dec 2012 and Dec 2013, we observed over 10,000 objects and measured more than 6,000 redshifts. Our strategy of retargeting faint objects across many observing runs has allowed us to measure redshifts for galaxies as faint as m_r=25 mag. We outline our target selection and observing strategy, quantify the redshift success rate for different types of targets, and discuss the implications for our main science goals. Finally, we highlight a few interesting objects as examples of the fortuitous yet not totally unexpected discoveries that can come from such a large spectroscopic survey.
△ Less
Submitted 12 April, 2015;
originally announced April 2015.
-
Galaxies in X-ray Selected Clusters and Groups in Dark Energy Survey Data I: Stellar Mass Growth of Bright Central Galaxies Since z~1.2
Authors:
Y. Zhang,
C. Miller,
T. Mckay,
P. Rooney,
A. E. Evrard,
A. K. Romer,
R. Perfecto,
J. Song,
S. Desai,
J. Mohr,
H. Wilcox,
A. Bermeo,
T. Jeltema,
D. Hollowood,
D. Bacon,
D. Capozzi,
C. Collins,
R. Das,
D. Gerdes,
C. Hennig,
M. Hilton,
B. Hoyle,
S. Kay,
A. Liddle,
R. G. Mann
, et al. (58 additional authors not shown)
Abstract:
Using the science verification data of the Dark Energy Survey (DES) for a new sample of 106 X-Ray selected clusters and groups, we study the stellar mass growth of Bright Central Galaxies (BCGs) since redshift 1.2. Compared with the expectation in a semi-analytical model applied to the Millennium Simulation, the observed BCGs become under-massive/under-luminous with decreasing redshift. We incorpo…
▽ More
Using the science verification data of the Dark Energy Survey (DES) for a new sample of 106 X-Ray selected clusters and groups, we study the stellar mass growth of Bright Central Galaxies (BCGs) since redshift 1.2. Compared with the expectation in a semi-analytical model applied to the Millennium Simulation, the observed BCGs become under-massive/under-luminous with decreasing redshift. We incorporate the uncertainties associated with cluster mass, redshift, and BCG stellar mass measurements into analysis of a redshift-dependent BCG-cluster mass relation, $m_{*}\propto(\frac{M_{200}}{1.5\times 10^{14}M_{\odot}})^{0.24\pm 0.08}(1+z)^{-0.19\pm0.34}$, and compare the observed relation to the model prediction. We estimate the average growth rate since $z = 1.0$ for BCGs hosted by clusters of $M_{200, z}=10^{13.8}M_{\odot}$, at $z=1.0$: $m_{*, BCG}$ appears to have grown by $0.13\pm0.11$ dex, in tension at $\sim 2.5 σ$ significance level with the $0.40$ dex growth rate expected from the semi-analytic model. We show that the buildup of extended intra-cluster light after $z=1.0$ may alleviate this tension in BCG growth rates.
△ Less
Submitted 2 December, 2015; v1 submitted 12 April, 2015;
originally announced April 2015.
-
Light-emitting diodes by bandstructure engineering in van der Waals heterostructures
Authors:
F. Withers,
O. Del Pozo-Zamudio,
A. Mishchenko,
A. P. Rooney,
A. Gholinia,
K. Watanabe,
T. Taniguchi,
S. J. Haigh,
A. K. Geim,
A. I. Tartakovskii,
K. S. Novoselov
Abstract:
The advent of graphene and related 2D materials has recently led to a new technology: heterostructures based on these atomically thin crystals. The paradigm proved itself extremely versatile and led to rapid demonstration of tunnelling diodes with negative differential resistance, tunnelling transistors5, photovoltaic devices, etc. Here we take the complexity and functionality of such van der Waal…
▽ More
The advent of graphene and related 2D materials has recently led to a new technology: heterostructures based on these atomically thin crystals. The paradigm proved itself extremely versatile and led to rapid demonstration of tunnelling diodes with negative differential resistance, tunnelling transistors5, photovoltaic devices, etc. Here we take the complexity and functionality of such van der Waals heterostructures to the next level by introducing quantum wells (QWs) engineered with one atomic plane precision. We describe light emitting diodes (LEDs) made by stacking up metallic graphene, insulating hexagonal boron nitride (hBN) and various semiconducting monolayers into complex but carefully designed sequences. Our first devices already exhibit extrinsic quantum efficiency of nearly 10% and the emission can be tuned over a wide range of frequencies by appropriately choosing and combining 2D semiconductors (monolayers of transition metal dichalcogenides). By preparing the heterostructures on elastic and transparent substrates, we show that they can also provide the basis for flexible and semi-transparent electronics. The range of functionalities for the demonstrated heterostructures is expected to grow further with increasing the number of available 2D crystals and improving their electronic quality.
△ Less
Submitted 24 December, 2014;
originally announced December 2014.
-
Heterostructures produced from nanosheet-based inks
Authors:
F. Withers,
H. Yang,
L. Britnell,
A. P Rooney,
E. Lewis,
A. Felten,
C. R. Woods,
V. Sanchez Romaguera,
T. Georgiou,
A. Eckmann,
Y. J. Kim,
S. G. Yeates,
S. J. Haigh,
A. K. Geim,
K. S. Novoselov,
C. Casiraghi
Abstract:
The new paradigm of heterostructures based on two-dimensional (2D) atomic crystals has already led to the observation of exciting physical phenomena and creation of novel devices. The possibility of combining layers of different 2D materials in one stack allows unprecedented control over the electronic and optical properties of the resulting material. Still, the current method of mechanical transf…
▽ More
The new paradigm of heterostructures based on two-dimensional (2D) atomic crystals has already led to the observation of exciting physical phenomena and creation of novel devices. The possibility of combining layers of different 2D materials in one stack allows unprecedented control over the electronic and optical properties of the resulting material. Still, the current method of mechanical transfer of individual 2D crystals, though allowing exceptional control over the quality of such structures and interfaces, is not scalable. Here we show that such heterostructures can be assembled from chemically exfoliated 2D crystals, allowing for low-cost and scalable methods to be used in the device fabrication.
△ Less
Submitted 4 September, 2014;
originally announced September 2014.
-
The XMM Cluster Survey: Evidence for energy injection at high redshift from evolution of the X-ray luminosity-temperature relation
Authors:
Matt Hilton,
A. Kathy Romer,
Scott T. Kay,
Nicola Mehrtens,
E. J. Lloyd-Davies,
Peter A. Thomas,
Chris J. Short,
Julian A. Mayers,
Philip J. Rooney,
John P. Stott,
Chris A. Collins,
Craig D. Harrison,
Ben Hoyle,
Andrew R. Liddle,
Robert G. Mann,
Christopher J. Miller,
Martin Sahlen,
Pedro T. P. Viana,
Michael Davidson,
Mark Hosmer,
Robert C. Nichol,
Kivanc Sabirli,
S. A. Stanford,
Michael J. West
Abstract:
We measure the evolution of the X-ray luminosity-temperature (L_X-T) relation since z~1.5 using a sample of 211 serendipitously detected galaxy clusters with spectroscopic redshifts drawn from the XMM Cluster Survey first data release (XCS-DR1). This is the first study spanning this redshift range using a single, large, homogeneous cluster sample. Using an orthogonal regression technique, we find…
▽ More
We measure the evolution of the X-ray luminosity-temperature (L_X-T) relation since z~1.5 using a sample of 211 serendipitously detected galaxy clusters with spectroscopic redshifts drawn from the XMM Cluster Survey first data release (XCS-DR1). This is the first study spanning this redshift range using a single, large, homogeneous cluster sample. Using an orthogonal regression technique, we find no evidence for evolution in the slope or intrinsic scatter of the relation since z~1.5, finding both to be consistent with previous measurements at z~0.1. However, the normalisation is seen to evolve negatively with respect to the self-similar expectation: we find E(z)^{-1} L_X = 10^{44.67 +/- 0.09} (T/5)^{3.04 +/- 0.16} (1+z)^{-1.5 +/- 0.5}, which is within 2 sigma of the zero evolution case. We see milder, but still negative, evolution with respect to self-similar when using a bisector regression technique. We compare our results to numerical simulations, where we fit simulated cluster samples using the same methods used on the XCS data. Our data favour models in which the majority of the excess entropy required to explain the slope of the L_X-T relation is injected at high redshift. Simulations in which AGN feedback is implemented using prescriptions from current semi-analytic galaxy formation models predict positive evolution of the normalisation, and differ from our data at more than 5 sigma. This suggests that more efficient feedback at high redshift may be needed in these models.
△ Less
Submitted 4 July, 2012; v1 submitted 24 May, 2012;
originally announced May 2012.
-
The XMM Cluster Survey: The interplay between the brightest cluster galaxy and the intra-cluster medium via AGN feedback
Authors:
John P. Stott,
Ryan C. Hickox,
Alastair C. Edge,
Chris A. Collins,
Matt Hilton,
Craig D. Harrison,
A. Kathy Romer,
Philip J. Rooney,
Scott T. Kay,
Christopher J. Miller,
Martin Sahlen,
Ed J. Lloyd-Davies,
Nicola Mehrtens,
Ben Hoyle,
Andrew R. Liddle,
Pedro T. P. Viana,
Ian G. McCarthy,
Joop Schaye,
C. M. Booth
Abstract:
Using a sample of 123 X-ray clusters and groups drawn from the XMM-Cluster Survey first data release, we investigate the interplay between the brightest cluster galaxy (BCG), its black hole, and the intra-cluster/group medium (ICM). It appears that for groups and clusters with a BCG likely to host significant AGN feedback, gas cooling dominates in those with Tx > 2 keV while AGN feedback dominates…
▽ More
Using a sample of 123 X-ray clusters and groups drawn from the XMM-Cluster Survey first data release, we investigate the interplay between the brightest cluster galaxy (BCG), its black hole, and the intra-cluster/group medium (ICM). It appears that for groups and clusters with a BCG likely to host significant AGN feedback, gas cooling dominates in those with Tx > 2 keV while AGN feedback dominates below. This may be understood through the sub-unity exponent found in the scaling relation we derive between the BCG mass and cluster mass over the halo mass range 10^13 < M500 < 10^15Msol and the lack of correlation between radio luminosity and cluster mass, such that BCG AGN in groups can have relatively more energetic influence on the ICM. The Lx - Tx relation for systems with the most massive BCGs, or those with BCGs co-located with the peak of the ICM emission, is steeper than that for those with the least massive and most offset, which instead follows self-similarity. This is evidence that a combination of central gas cooling and powerful, well fuelled AGN causes the departure of the ICM from pure gravitational heating, with the steepened relation crossing self-similarity at Tx = 2 keV. Importantly, regardless of their black hole mass, BCGs are more likely to host radio-loud AGN if they are in a massive cluster (Tx > 2 keV) and again co-located with an effective fuel supply of dense, cooling gas. This demonstrates that the most massive black holes appear to know more about their host cluster than they do about their host galaxy. The results lead us to propose a physically motivated, empirical definition of 'cluster' and 'group', delineated at 2 keV.
△ Less
Submitted 8 March, 2012; v1 submitted 16 February, 2012;
originally announced February 2012.
-
Decoherence Control and Purification of Two-dimensional Quantum Density Matrices under Lindblad Dissipation
Authors:
Patrick Rooney,
Anthony Bloch,
Chitra Rangan
Abstract:
Control of quantum dissipative systems can be challenging because control variables are typically part of the system Hamiltonian, which can only generate motion along unitary orbits of the system. To transit between orbits, one must harness the dissipation super-operator. To separate the inter-orbit dynamics from the Hamiltonian dynamics for a generic two-dimensional system, we project the Lindbla…
▽ More
Control of quantum dissipative systems can be challenging because control variables are typically part of the system Hamiltonian, which can only generate motion along unitary orbits of the system. To transit between orbits, one must harness the dissipation super-operator. To separate the inter-orbit dynamics from the Hamiltonian dynamics for a generic two-dimensional system, we project the Lindblad master equation onto the set of spectra of the density matrix, and we interpret the location along the orbit to be a new control variable. The resulting differential equation allows us to analyze the controllability of a general two-dimensional Lindblad system, particularly systems where the dissipative term has an anti-symmetric part. We extend this to categorize the possible purifiable systems in two dimensions.
△ Less
Submitted 1 January, 2012;
originally announced January 2012.
-
The XMM Cluster Survey: Optical analysis methodology and the first data release
Authors:
Nicola Mehrtens,
A. Kathy Romer,
E. J. Lloyd-Davies,
Matt Hilton,
Christopher J. Miller,
S. A. Stanford,
Mark Hosmer,
Ben Hoyle,
Chris A. Collins,
Andrew R. Liddle,
Pedro T. P. Viana,
Robert C. Nichol,
John P. Stott,
E. Naomi Dubois,
Scott T. Kay,
Martin Sahlen,
Owain Young,
C. J. Short,
L. Christodoulou,
William A. Watson,
Michael Davidson,
Craig D. Harrison,
Leon Baruah,
Mathew Smith,
Claire Burke
, et al. (12 additional authors not shown)
Abstract:
The XMM Cluster Survey (XCS) is a serendipitous search for galaxy clusters using all publicly available data in the XMM-Newton Science Archive. Its main aims are to measure cosmological parameters and trace the evolution of X-ray scaling relations. In this paper we present the first data release from the XMM Cluster Survey (XCS-DR1). This consists of 503 optically confirmed, serendipitously detect…
▽ More
The XMM Cluster Survey (XCS) is a serendipitous search for galaxy clusters using all publicly available data in the XMM-Newton Science Archive. Its main aims are to measure cosmological parameters and trace the evolution of X-ray scaling relations. In this paper we present the first data release from the XMM Cluster Survey (XCS-DR1). This consists of 503 optically confirmed, serendipitously detected, X-ray clusters. Of these clusters, 255 are new to the literature and 356 are new X-ray discoveries. We present 464 clusters with a redshift estimate (0.06 < z < 1.46), including 261 clusters with spectroscopic redshifts. In addition, we have measured X-ray temperatures (Tx) for 402 clusters (0.4 < Tx < 14.7 keV). We highlight seven interesting subsamples of XCS-DR1 clusters: (i) 10 clusters at high redshift (z > 1.0, including a new spectroscopically-confirmed cluster at z = 1.01); (ii) 67 clusters with high Tx (> 5 keV); (iii) 131 clusters/groups with low Tx (< 2 keV); (iv) 27 clusters with measured Tx values in the SDSS `Stripe 82' co-add region; (v) 78 clusters with measured Tx values in the Dark Energy Survey region; (vi) 40 clusters detected with sufficient counts to permit mass measurements (under the assumption of hydrostatic equilibrium); (vii) 105 clusters that can be used for applications such as the derivation of cosmological parameters and the measurement of cluster scaling relations. The X-ray analysis methodology used to construct and analyse the XCS-DR1 cluster sample has been presented in a companion paper, Lloyd-Davies et al. (2010).
△ Less
Submitted 17 June, 2011; v1 submitted 15 June, 2011;
originally announced June 2011.