Showing 1–50 of 81 results for author: Romero, A H

Polar phonons and magnetic excitations in the antiferromagnet CoF$_2$

Authors: R. M. Dubrovin, A. Tellez-Mora, A. C. Garcia-Castro, N. V. Siverin, N. N. Novikova, K. N. Boldyrev, E. A. Mashkovich, Aldo H. Romero, R. V. Pisarev

Abstract: The coupling between antiferromagnetic spins and infrared-active phonons in solids is responsible for many intriguing phenomena and is a field of intense research with extensive potential applications in the modern devices based on antiferromagnetic spintronics and phononics. Insulating rutile antiferromagnetic crystal CoF$_2$ is one of the model materials for studying nonlinear magnetophononics d… ▽ More The coupling between antiferromagnetic spins and infrared-active phonons in solids is responsible for many intriguing phenomena and is a field of intense research with extensive potential applications in the modern devices based on antiferromagnetic spintronics and phononics. Insulating rutile antiferromagnetic crystal CoF$_2$ is one of the model materials for studying nonlinear magnetophononics due to the strong spin-lattice coupling as a result of the orbitally degenerate ground state of Co$^{2+}$ ions manifested in the plethora of static and induced piezomagnetic effects. Here we report results on the complete infrared spectroscopy study of lattice and magnetic dynamics in CoF$_2$ in a wide temperature range and their careful analysis. We observed that infrared-active phonons demonstrate frequency shifts at the antiferromagnetic ordering. Furthermore, using first-principles calculations, we examined the lattice dynamics and disclosed that these frequency shifts are rather due to the spin-phonon coupling than geometrical lattice effects. Next we found that the low-frequency dielectric permittivity demonstrates distinct changes at the antiferromagnetic ordering due to the spontaneous magnetodielectric effect caused by the behavior of infrared-active phonons. In addition, we have observed magnetic excitations in the infrared spectra and identified their magnetodipole origin. To strengthen our conclusions, we analyze the theoretical phonon-magnon coupling overall phonons at the $Γ$ point. We conclude that the largest effect comes from the $A_{1g}$ and $B_{2g}$ Raman-active modes. As such, our results establish a solid basis for further investigations and more deeper understanding of the coupling of phonons with spins and magnetic excitations in antiferromagnets. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Comments: 17 pages, 11 figures, 5 tables

Journal ref: Phys. Rev. B 109, 224312 (2024)

Structural chirality and related properties in the periodic inorganic solids: Review and perspectives

Authors: Eric Bousquet, Mauro Fava, Zachary Romestan, Fernando Gómez-Ortiz, Emma E. McCabe, Aldo H. Romero

Abstract: Chirality refers to the asymmetry of objects that cannot be superimposed on their mirror image. It is a concept that exists in various scientific fields and has profound consequences. Although these are perhaps most widely recognized within biology, chemistry, and pharmacology, recent advances in chiral phonons, topological systems, crystal enantiomorphic materials, and magneto-chiral materials ha… ▽ More Chirality refers to the asymmetry of objects that cannot be superimposed on their mirror image. It is a concept that exists in various scientific fields and has profound consequences. Although these are perhaps most widely recognized within biology, chemistry, and pharmacology, recent advances in chiral phonons, topological systems, crystal enantiomorphic materials, and magneto-chiral materials have brought this topic to the forefront of condensed matter physics research. Our review discusses the symmetry requirements and the features associated with structural chirality in inorganic materials. This allows us to explore the nature of phase transitions in these systems, the coupling between order parameters, and their impact on the material's physical properties. We highlight essential contributions to the field, particularly recent progress in the study of chiral phonons, altermagnetism, magnetochirality between others. Despite the rarity of naturally occurring inorganic chiral crystals, this review also highlights a significant knowledge gap, presenting challenges and opportunities for structural chirality mostly at the fundamental level, e.g., chiral displacive phase transitions and ferrochirality, possibilities of tuning and switching structural chirality by external means (electric, magnetic, or strain fields), whether chirality could be an independent order parameter, and whether structural chirality could be quantified, etc. Beyond simply summarising this field of research, this review aims to inspire further research in materials science by addressing future challenges, encouraging the exploration of chirality beyond traditional boundaries, and seeking the development of innovative materials with superior or new properties. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Pros and cons of structural chirality measurements and computation of handedness in periodic solids

Authors: Fernando Gómez-Ortiz, Mauro Fava, Emma E. McCabe, Aldo H. Romero, Eric Bousquet

Abstract: We compare the various chirality measures most widely used in the literature to quantify chiral symmetry in extended solids, i.e., the continuous chirality measure, the Hausdorff distance, and the angular momentum. By studying these functions in an algebraically tractable case, we can evaluate their strengths and weaknesses when applied to more complex crystals. Going beyond those classical calcul… ▽ More We compare the various chirality measures most widely used in the literature to quantify chiral symmetry in extended solids, i.e., the continuous chirality measure, the Hausdorff distance, and the angular momentum. By studying these functions in an algebraically tractable case, we can evaluate their strengths and weaknesses when applied to more complex crystals. Going beyond those classical calculations, we propose a new method to quantify the handedness of a crystal based on a pseudoscalar function, i.e., the helicity. This quantity, borrowed from hydrodynamics, can be computed from the eigenvector carrying the system from the high-symmetry non-chiral phase to the low-symmetry chiral phase. Different model systems like K$_3$NiO$_2$, CsCuCl$_3$ and MgTi$_2$O$_4$ are used as test cases where we show the superior interest of using helicity to quantify chirality together with the handedness distinction. △ Less

Submitted 28 May, 2024; v1 submitted 25 May, 2024; originally announced May 2024.

A phonon-driven mechanism for an emergent and reversible chirality in crystals

Authors: Mauro Fava, Emma McCabe, Aldo H. Romero, Eric Bousquet

Abstract: We demonstrate from first-principles calculations applied to the K$_{3}$NiO$_{2}$ crystal that a structural phase transition from an achiral to a chiral phase can be mediated by a soft zone boundary phonon and that it can be controlled by pressure and epitaxial strain. Calculations in the presence of an electric field hint at a rich physics dominated by the competition between chirality, polar, an… ▽ More We demonstrate from first-principles calculations applied to the K$_{3}$NiO$_{2}$ crystal that a structural phase transition from an achiral to a chiral phase can be mediated by a soft zone boundary phonon and that it can be controlled by pressure and epitaxial strain. Calculations in the presence of an electric field hint at a rich physics dominated by the competition between chirality, polar, and achiral distortions. Induced by the interaction between chiral, polar, and axial phonons, an optimal parameter window for the permanent reversal of chirality is observed. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Promises and technological prospects of two-dimensional Rashba materials

Authors: Arjyama Bordoloi, A. C. Garcia-Castro, Zachary Romestan, Aldo H. Romero, Sobhit Singh

Abstract: The Rashba spin-orbit coupling effect, primarily arising from structural-inversion asymmetry in periodic crystals, has garnered considerable attention due to its tunability and potential applications in spintronics. Its capability to manipulate electron spin without an external magnetic field opens new avenues for spintronic device design, particularly in semiconductor technology. Within this fram… ▽ More The Rashba spin-orbit coupling effect, primarily arising from structural-inversion asymmetry in periodic crystals, has garnered considerable attention due to its tunability and potential applications in spintronics. Its capability to manipulate electron spin without an external magnetic field opens new avenues for spintronic device design, particularly in semiconductor technology. Within this framework, 2D Rashba materials hold special interest due to their inherent characteristics, which facilitate miniaturization and engineering capabilities. In this Perspective article, we provide an overview of recent advancements in the research of 2D Rashba materials, aiming to offer a comprehensive understanding of the diverse manifestations and multifaceted implications of the Rashba effect in material science. Rather than merely presenting a list of materials, our approach involves synthesizing various viewpoints, assessing current trends, and addressing challenges within the field. Our objective is to bridge the gap between fundamental research and practical applications by correlating each material with the necessary advancements required to translate theoretical concepts into tangible technologies. Furthermore, we highlight promising avenues for future research and development, drawing from insights gleaned from the current state of the field. △ Less

Submitted 23 April, 2024; originally announced April 2024.

Ferroelectricity and chirality in the Pb$_5$Ge$_3$O$_{11}$ crystal

Authors: Mauro Fava, William Lafargue-Dit-Hauret, Aldo H. Romero, Eric Bousquet

Abstract: We study from first-principles calculations the ferroelectric structural phase transition of Pb$_5$Ge$_3$O$_{11}$ crystal. The calculations of phonons and Born effective charges of the paraelectric phase allow us to identify a polar instability that is unstable in both transverse-optic and longitudinal-optic versions, giving rise to an entire branch of instability along a propagation vector parall… ▽ More We study from first-principles calculations the ferroelectric structural phase transition of Pb$_5$Ge$_3$O$_{11}$ crystal. The calculations of phonons and Born effective charges of the paraelectric phase allow us to identify a polar instability that is unstable in both transverse-optic and longitudinal-optic versions, giving rise to an entire branch of instability along a propagation vector parallel to the mode polarization (the hexagonal axe). This is the hint of hyperferroelectricity and the stable head-to-head and tail-to-tail domain, as recently reported from both experiments and theory. Then, our analysis of the ferroelectric phase shows that the polarization of Pb$_5$Ge$_3$O$_{11}$ is uniaxial along the hexagonal axes and with small in-plane components due to a piezoelectric effect. The symmetry-adapted mode analysis shows that the total ferroelectric ground state distortion comes mainly from polar distortions of the unstable polar phonon mode but also from an invariant, cooperative mode that amplifies the polar deformation. We also build a phenomenological model that highlights how the coupling between these modes is at play and helps us understand how to reproduce the second-order phase transition. At last, we also quantify the structural chirality through the continuous symmetry measure method and trace its origin to the polar unstable mode itself. By extending our approach to the phonon states we further show that the chirality is poorly affected by the relaxation but could also be enhanced by activating high frequency modes with polar symmetry. Finally we study the phonon angular momentum (AM) distribution in both phases and identify trends in the AM behaviour across the Brillouin zone. △ Less

Submitted 16 January, 2024; v1 submitted 24 November, 2023; originally announced November 2023.

Two-Dimensional Noble Metal Chalcogenides in the Frustrated Snub-Square Lattice

Authors: Hai-Chen Wang, Ahmad W. Huran, Miguel A. L. Marques, Muralidhar Nalabothula, Ludger Wirtz, Zachary Romestan, Aldo H. Romero

Abstract: We study two-dimensional noble metal chalcogenides, with composition {Cu, Ag, Au}2{S, Se, Te}, crystallizing in a snub-square lattice. This is a semi-regular two-dimensional tesselation formed by triangles and squares that exhibits geometrical frustration. We use for comparison a square lattice, from which the snub-square tiling can be derived by a simple rotation of the squares. The mono-layer sn… ▽ More We study two-dimensional noble metal chalcogenides, with composition {Cu, Ag, Au}2{S, Se, Te}, crystallizing in a snub-square lattice. This is a semi-regular two-dimensional tesselation formed by triangles and squares that exhibits geometrical frustration. We use for comparison a square lattice, from which the snub-square tiling can be derived by a simple rotation of the squares. The mono-layer snub-square chalcogenides are very close to thermodynamic stability, with the most stable system (Ag2Se) a mere 7 meV/atom above the convex hull of stability. All compounds studied in the square and snub-square lattice are semiconductors, with band gaps ranging from 0.1 to more than 2.5 eV. Excitonic effects are strong, with an exciton binding energy of around 0.3 eV. We propose the Cu (001) surface as a possible substrate to synthesize Cu2Se, although many other metal and semiconducting surfaces can be found with very good lattice matching. △ Less

Submitted 18 October, 2023; originally announced October 2023.

Chiral magnetism, lattice dynamics, and anomalous Hall conductivity in the novel V$_3$AuN antiferromagnetic antiperovskite

Authors: J. M. Duran-Pinilla, Aldo H. Romero, A. C. Garcia-Castro

Abstract: Antiferromagnetic antiperovskites, where magnetically active 3$d$ metal cations are placed in the octahedral corners of a perovskite structure, are in the spotlight due to their intertwined magnetic structure and topological properties. Especially their anomalous Hall conductivity, which can be controlled by applied strain and/or electric field, makes them highly attractive in different electronic… ▽ More Antiferromagnetic antiperovskites, where magnetically active 3$d$ metal cations are placed in the octahedral corners of a perovskite structure, are in the spotlight due to their intertwined magnetic structure and topological properties. Especially their anomalous Hall conductivity, which can be controlled by applied strain and/or electric field, makes them highly attractive in different electronic applications. Here, we present the study and theoretical understanding of a new antiperovskite compound that can offer enormous opportunities in a broad set of applications. Using first-principles calculations, we investigated the structure, lattice dynamics, noncollinear magnetic ordering, and electronic behavior in the Vanadium-based antiperovskite V$_3$AuN. We found an antiperovskite structure centered on N similar to the Mn$_3A$N family as the structural ground state. In such a phase, a \emph{Pm$\bar{3}$m} ground state was found in contrast to the \emph{Cmcm} post-antiperovskite layered structure, as in the V$_3A$N, $A$ = Ga, Ge, As, and P. We studied the lattice dynamics and electronic properties, demonstrating its vibrational stability in the cubic structure and a chiral antiferromagnetic noncollinear ordering as a magnetic ground state. Finally, we found that the anomalous Hall conductivity, associated with the topological features induced by the magnetic symmetry, is $σ_{xy}$ = $-$291 S$\cdot$cm$^{-1}$ ($σ_{111}$ = $-$504 S$\cdot$cm$^{-1}$). The latter is the largest reported in the antiferromagnetic antiperovskite family of compounds. △ Less

Submitted 14 October, 2023; originally announced October 2023.

Journal ref: Physical Review Materials, 6, 125003, (2022)

Large and tunable spin-orbit effect of 6p orbitals through structural cavities in crystals

Authors: Mauro Fava, William Lafargue-Dit-Hauret, Aldo H. Romero, Eric Bousquet

Abstract: We explore from first-principles calculations the ferroelectric material Pb5Ge3O11 as a model for controlling the spin-orbit interaction (SOC) in crystalline solids. The SOC has a surprisingly strong effect on the structural energy landscape by deepening the ferroelectric double well. We observe that this effect comes from a specific Pb Wyckoff site that lies on the verge of a natural cavity chann… ▽ More We explore from first-principles calculations the ferroelectric material Pb5Ge3O11 as a model for controlling the spin-orbit interaction (SOC) in crystalline solids. The SOC has a surprisingly strong effect on the structural energy landscape by deepening the ferroelectric double well. We observe that this effect comes from a specific Pb Wyckoff site that lies on the verge of a natural cavity channel of the crystal. We also find that a unique cavity state is formed by the empty 6p states of another Pb site at the edge of the cavity channel. This cavity state exhibits a sizeable spin splitting with a mixed Rashba-Weyl character and a topologically protected crossing of the related bands. We also show that the ferroelectric properties and the significant SOC effects are exceptionally robust against n-do** up to several electrons per unit cell. We trace the provenance of these original effects to the unique combination of the structural cavity channel and the chemistry of the Pb atoms with 6p orbitals localizing inside the channel. △ Less

Submitted 18 July, 2023; originally announced July 2023.

JARVIS-Leaderboard: A Large Scale Benchmark of Materials Design Methods

Authors: Kamal Choudhary, Daniel Wines, Kangming Li, Kevin F. Garrity, Vishu Gupta, Aldo H. Romero, Jaron T. Krogel, Kayahan Saritas, Addis Fuhr, Panchapakesan Ganesh, Paul R. C. Kent, Keqiang Yan, Yuchao Lin, Shuiwang Ji, Ben Blaiszik, Patrick Reiser, Pascal Friederich, Ankit Agrawal, Pratyush Tiwary, Eric Beyerle, Peter Minch, Trevor David Rhone, Ichiro Takeuchi, Robert B. Wexler, Arun Mannodi-Kanakkithodi , et al. (13 additional authors not shown)

Abstract: Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform… ▽ More Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform with multiple data modalities with both perfect and defect materials data is still lacking. This work introduces JARVIS-Leaderboard, an open-source and community-driven platform that facilitates benchmarking and enhances reproducibility. The platform allows users to set up benchmarks with custom tasks and enables contributions in the form of dataset, code, and meta-data submissions. We cover the following materials design categories: Artificial Intelligence (AI), Electronic Structure (ES), Force-fields (FF), Quantum Computation (QC) and Experiments (EXP). For AI, we cover several types of input data, including atomic structures, atomistic images, spectra, and text. For ES, we consider multiple ES approaches, software packages, pseudopotentials, materials, and properties, comparing results to experiment. For FF, we compare multiple approaches for material property predictions. For QC, we benchmark Hamiltonian simulations using various quantum algorithms and circuits. Finally, for experiments, we use the inter-laboratory approach to establish benchmarks. There are 1281 contributions to 274 benchmarks using 152 methods with more than 8 million data-points, and the leaderboard is continuously expanding. The JARVIS-Leaderboard is available at the website: https://pages.nist.gov/jarvis_leaderboard △ Less

Submitted 26 March, 2024; v1 submitted 20 June, 2023; originally announced June 2023.

Topic Modeling in Density Functional Theory on Citations of Condensed Matter Electronic Structure Packages

Authors: Marie Dumaz, Camila Romero-Bohorquez, Donald Adjeroh, Aldo H. Romero

Abstract: With an increasing number of new scientific papers being released, it becomes harder for researchers to be aware of recent articles in their field of study. Accurately classifying papers is a first step in the direction of personalized catering and easy access to research of interest. The field of Density Functional Theory (DFT) in particular is a good example of a methodology used in very differe… ▽ More With an increasing number of new scientific papers being released, it becomes harder for researchers to be aware of recent articles in their field of study. Accurately classifying papers is a first step in the direction of personalized catering and easy access to research of interest. The field of Density Functional Theory (DFT) in particular is a good example of a methodology used in very different studies, and interconnected disciplines, which has a very strong community publishing many research articles. We devise a new unsupervised method for classifying publications, based on topic modeling, and use a DFT-related selection of documents as a use case. We first create topics from word analysis and clustering of the abstracts from the publications, then attribute each publication/paper to a topic based on word similarity. We then make interesting observations by analyzing connections between the topics and publishers, journals, country or year of publication. The proposed approach is general, and can be applied to analyze publication and citation trends in other areas of study, beyond the field of Density Function Theory. △ Less

Submitted 16 February, 2023; originally announced March 2023.

Stability and diffusion of oxygen vacancies in LaNiO$_3$: a DMFT study

Authors: Uthpala Herath, Vijay Singh, Soumya S. Bhat, Hyowon Park, Aldo H. Romero

Abstract: Manipulating oxygen vacancies in strongly correlated rare-earth nickelate perovskites (RNiO$_3$) enables the tuning of their elusive metal-insulator transition (MIT), providing a better handle for control over their electronic properties. In this paper, we investigate the effect of various oxygen vacancy configurations on the MIT of LaNiO$_3$ by studying their spectral functions and the correspond… ▽ More Manipulating oxygen vacancies in strongly correlated rare-earth nickelate perovskites (RNiO$_3$) enables the tuning of their elusive metal-insulator transition (MIT), providing a better handle for control over their electronic properties. In this paper, we investigate the effect of various oxygen vacancy configurations on the MIT of LaNiO$_3$ by studying their spectral functions and the corresponding diffusion energy path using dynamical mean field theory (DMFT) and density functional theory plus U (DFT+U). To consider all possible configurations for a fixed vacancy concentration, we use a symmetry-adapted configurational ensemble method. Within this method, we can reduce the configurational space which needs to be considered, thus lowering the computational cost. We demonstrate that controlling the oxygen vacancy position can tune the occurrence of MIT. We also show that the nudged elastic band (NEB) energy barrier heights and energy profile obtained using DMFT are lower and different than those obtained using DFT+U due to dynamical quantum fluctuations among non-degenerate correlated orbitals not properly treated in DFT+U. △ Less

Submitted 14 December, 2022; originally announced December 2022.

Symmetry-based computational search for novel binary and ternary 2D materials

Authors: Hai-Chen Wang, Jonathan Schmidt, Miguel A. L. Marques, Ludger Wirtz, Aldo H. Romero

Abstract: We present a symmetry-based exhaustive approach to explore the structural and compositional richness of two-dimensional materials. We use a ``combinatorial engine'' that constructs potential compounds by occupying all possible Wyckoff positions for a certain space group with combinations of chemical elements. These combinations are restricted by imposing charge neutrality and the Pauling test for… ▽ More We present a symmetry-based exhaustive approach to explore the structural and compositional richness of two-dimensional materials. We use a ``combinatorial engine'' that constructs potential compounds by occupying all possible Wyckoff positions for a certain space group with combinations of chemical elements. These combinations are restricted by imposing charge neutrality and the Pauling test for electronegativities. The structures are then pre-optimized with a specially crafted universal neural-network force-field, before a final step of geometry optimization using density-functional theory is performed. In this way we unveil an unprecedented variety of two-dimensional materials, covering the whole periodic table in more than 30 different stoichiometries of form A$_n$B$_m$ or A$_n$B$_m$C$_k$. Among the found structures we find examples that can be built by decorating nearly all Platonic and Archimedean tesselations as well as their dual Laves or Catalan tilings. We also obtain a rich, and unexpected, polymorphism for some specific compounds. We further accelerate the exploration of the chemical space of two-dimensional materials by employing machine-learning-accelerated prototype search, based on the structural types discovered in the exhaustive search. In total, we obtain around 6500 compounds, not present in previous available databases of 2D materials, with an energy of less than 250~meV/atom above the convex hull of thermodynamic stability. △ Less

Submitted 22 April, 2023; v1 submitted 7 December, 2022; originally announced December 2022.

Layered topological semimetal GaGeTe: new polytype with non-centrosymmetric structure

Authors: S. Gallego-Parra, E. Bandiello, A. Liang, E. Lora da Silva, P. Rodríguez-Hernández, A. Muñoz, S. Radescu, A. H. Romero, C. Drasar, D. Errandonea, F. J. Manjón

Abstract: GaGeTe is a layered material composed of germanene and GaTe sublayers that has been recently predicted to be a basic Z2 topological semimetal. To date, only one polytype of GaGeTe is known with trigonal centrosymmetric structure (alpha phase, space group R-3m, No. 166). Here we show that as-grown samples of GaGeTe show traces of at least another polytype with hexagonal non-centrosymmetric structur… ▽ More GaGeTe is a layered material composed of germanene and GaTe sublayers that has been recently predicted to be a basic Z2 topological semimetal. To date, only one polytype of GaGeTe is known with trigonal centrosymmetric structure (alpha phase, space group R-3m, No. 166). Here we show that as-grown samples of GaGeTe show traces of at least another polytype with hexagonal non-centrosymmetric structure (beta phase, space group P63mc, No. 186). Moreover, we suggest that another bulk hexagonal polytype (gamma phase, space group P-3m1, No. 164) could also be found near room conditions. Both alpha and beta polytypes have been identified and characterized by means of X-ray diffraction and Raman scattering measurements with the support of ab initio calculations. We provide the vibrational properties of both polytypes and show that the Raman spectrum reported for GaGeTe almost forty years ago and attributed to the alpha phase, was, in fact, that of the secondary beta phase. Additionally, we show that a Fermi resonance occurs in alpha-GaGeTe under non-resonant excitation conditions, but not under resonant excitation conditions. Theoretical calculations show that bulk beta-GaGeTe is a non-centrosymmetric weak topological semimetal with even smaller lattice thermal conductivity than centrosymmetric bulk alpha-GaGeTe. In perspective, our work paves the way for the control and engineering of GaGeTe polytypes to design and implement complex van der Waals heterostructures formed by a combination of centrosymmetric and non-centrosymmetric layers of up to three different polytypes in a single material, suitable for a number of fundamental studies and technological applications. △ Less

Submitted 6 July, 2022; originally announced July 2022.

Anomalous Hall conductivity control in Mn$_3$NiN antiperovskite by epitaxial strain along the kagome plane

Authors: D. Torres-Amaris, A. Bautista-Hernandez, Rafael González-Hernández, Aldo. H. Romero, A. C. Garcia-Castro

Abstract: Antiferromagnetic manganese-based nitride antiperovskites, such as Mn$_3$NiN, hold a triangular frustrated magnetic ordering over their kagome lattice formed by the Mn atoms along the (111)-plane. As such, frustration imposes a non-trivial interplay between the symmetric and asymmetric magnetic interactions, which can only reach equilibrium in a noncollinear magnetic configuration. Consequently, t… ▽ More Antiferromagnetic manganese-based nitride antiperovskites, such as Mn$_3$NiN, hold a triangular frustrated magnetic ordering over their kagome lattice formed by the Mn atoms along the (111)-plane. As such, frustration imposes a non-trivial interplay between the symmetric and asymmetric magnetic interactions, which can only reach equilibrium in a noncollinear magnetic configuration. Consequently, the associated electronic interactions and their possible tuning by external constraints, such as applied epitaxial strain, play a crucial role in defining the microscopic and macroscopic properties of such topological condensed matter systems. Thus, in the present work, we explored and explained the effect of the epitaxial strain imposed within the (111)-plane, in which the magnetic and crystallographic symmetry operations are kept fixed, and only the magnitude of the ionic and electronic interactions are tuned. We found a linear shifting in the energy of the band structure and a linear increase/decrease of the available states near the Fermi level with the applied strain. Concretely, the compression strain reduces the Mn-Mn distances in the (111) kagome plane but linearly increases the separation between the stacked kagome lattices and the available states near the Fermi level. Despite the linear controlling of the available states across the Fermi energy, the anomalous Hall conductivity shows a non-linear behavior where the $σ_{111}$ conductivity nearly vanishes for tensile strain. On the other hand, $σ_{111}$ fetches a maximum increase of 26\% about the unstrained structure for a compression value close to $-$1.5\%.This behavior found an explanation in the non-divergent Berry curvature within the kagome plane, which is increased for constraining but significantly reduced for expansion strain values... △ Less

Submitted 15 April, 2022; originally announced April 2022.

Incipient geometric lattice instability of cubic fluoroperovskites

Authors: R. M. Dubrovin, A. C. Garcia-Castro, N. V. Siverin, N. N. Novikova, K. N. Boldyrev, Aldo H. Romero, R. V. Pisarev

Abstract: Inorganic metal halide perovskites are promising materials for next-generation technologies due to a plethora of unique physical properties, many of which cannot be observed in the oxide perovskites. On the other hand, the search for ferroelectricity and multiferroicity in lead-free inorganic halide perovskites remains a challenging research topic. Here, we experimentally show that cubic fluoroper… ▽ More Inorganic metal halide perovskites are promising materials for next-generation technologies due to a plethora of unique physical properties, many of which cannot be observed in the oxide perovskites. On the other hand, the search for ferroelectricity and multiferroicity in lead-free inorganic halide perovskites remains a challenging research topic. Here, we experimentally show that cubic fluoroperovskites exhibit proximity to incipient ferroelectrics, which manifested in the softening of the low-frequency polar phonons in the Brillouin zone center at cooling. Furthermore, we reveal the coupling between harmonic and anharmonic force constants of the softening phonons and their correlation with the perovskite tolerance factor. Next, using first-principles calculations, we examine the lattice dynamics of the cubic fluoroperovskites and disclose the incipient lattice instability at which the harmonic force constants of low-lying phonons tend to decrease with a reduction of tolerance factor at all high-symmetry points of the Brillouin zone. The correlations with the tolerance factor indicate the geometric origin of observed incipient lattice instability in the cubic fluoroperovskites caused by the steric effect due to the volume filling of the unit cell by different radius ions. These results provide insights into the lattice dynamics and potential ferroelectric properties of inorganic lead-free metal halide perovskites, relevant to further design and synthesis of new multifunctional materials. △ Less

Submitted 25 October, 2021; originally announced October 2021.

Comments: 18 pages, 9 figures, 5 tables

Journal ref: Phys. Rev. B 104, 144304 (2021)

High-temperature phonon-mediated superconductivity in monolayer Mg2B4C2

Authors: Sobhit Singh, ? Aldo H. Romero, José D. Mella, Vitalie Eremeev, Enrique Muñoz Anastassia N. Alexandrova, Karin M. Rabe, David Vanderbilt, Francisco Muñoz

Abstract: A new two-dimensional material { Mg2B4C2, belonging to the family of the conventional superconductor MgB2, is theoretically predicted to exhibit superconductivity with critical temperature Tc estimated in the 47-48 K range (predicted using the McMillian-Allen-Dynes formula) without any tuning of external parameters such as do**, strain, or substrate-induced effects. The origin of such a high int… ▽ More A new two-dimensional material { Mg2B4C2, belonging to the family of the conventional superconductor MgB2, is theoretically predicted to exhibit superconductivity with critical temperature Tc estimated in the 47-48 K range (predicted using the McMillian-Allen-Dynes formula) without any tuning of external parameters such as do**, strain, or substrate-induced effects. The origin of such a high intrinsic Tc is ascribed to the presence of strong electron-phonon coupling and topological Dirac states (which are absent in MgB2) yielding a large density of states at the Fermi level. This material also features a nontrivial electronic band topology exhibiting Dirac points, practically gapless Dirac nodal lines, and topological nontrivial edge states. Consequently, it is a potential candidate for realization of topological superconductivity in 2D. This system is obtained after replacing the chemically active boron layers in MgB2 by chemically inactive boron-carbon layers. Hence, the surfaces of this material are inert. Our calculations confirm the stability of 2D Mg2B4C2. We also find that the key features of this material remain essentially unchanged when its thickness is increased by modestly increasing the number of inner MgB2 layers. △ Less

Submitted 3 October, 2021; originally announced October 2021.

Comments: 11 pages, 3 figures

Exploring DFT$+U$ parameter space with a Bayesian calibration assisted by Markov chain Monte Carlo sampling

Authors: Pedram Tavadze, Reese Boucher, Guillermo Avendaño-Franco, Keenan X. Kocan, Sobhit Singh, Viviana Dovale-Farelo, Wilfredo Ibarra-Hernández, Matthew B Johnson, David S. Mebane, Aldo H Romero

Abstract: Density-functional theory is widely used to predict the physical properties of materials. However, it usually fails for strongly correlated materials. A popular solution is to use the Hubbard corrections to treat strongly correlated electronic states. Unfortunately, the exact values of the Hubbard $U$ and $J$ parameters are initially unknown, and they can vary from one material to another. In this… ▽ More Density-functional theory is widely used to predict the physical properties of materials. However, it usually fails for strongly correlated materials. A popular solution is to use the Hubbard corrections to treat strongly correlated electronic states. Unfortunately, the exact values of the Hubbard $U$ and $J$ parameters are initially unknown, and they can vary from one material to another. In this semi-empirical study, we explore the $U$ and $J$ parameter space of a group of iron-based compounds to simultaneously improve the prediction of physical properties (volume, magnetic moment, and bandgap). We used a Bayesian calibration assisted by Markov chain Monte Carlo sampling for three different exchange-correlation functionals (LDA, PBE, and PBEsol). We found that LDA requires the largest $U$ correction. PBE has the smallest standard deviation and its $U$ and $J$ parameters are the most transferable to other iron-based compounds. Lastly, PBE predicts lattice parameters reasonably well without the Hubbard correction. △ Less

Submitted 15 September, 2021; originally announced September 2021.

Engineering of Ferroic Orders in Thin Films by Anionic Substitution

Authors: A. C. Garcia-Castro, Yanjun Ma, Zachary Romestan, Eric Bousquet, Cheng Cen, Aldo H. Romero

Abstract: Multiferroics are a unique class of materials where magnetic and ferroelectric orders coexist. The research on multiferroics contributes significantly to the fundamental understanding of the strong correlations between different material degrees of freedom and provides an energy-efficient route toward the electrical control of magnetism. While multiple ABO3 oxide perovskites have been identified a… ▽ More Multiferroics are a unique class of materials where magnetic and ferroelectric orders coexist. The research on multiferroics contributes significantly to the fundamental understanding of the strong correlations between different material degrees of freedom and provides an energy-efficient route toward the electrical control of magnetism. While multiple ABO3 oxide perovskites have been identified as being multiferroic, their magnetoelectric coupling strength is often weak, necessitating the material search in different compounds. Here, we report the observation of room-temperature multiferroic orders in multi-anion SrNbO3-xNx thin films. In these samples, the multi-anion state enables the room-temperature ferromagnetic ordering of the Nb d-electrons. Simultaneously, we find ferroelectric responses that originate from the structural symmetry breaking associated with both the off-center displacements of Nb and the geometric displacements of Sr, depending on the relative O-N arrangements within the Nb-centered octahedra. Our findings not only diversify the available multiferroic material pool but also demonstrate a new multiferroism design strategy via multi-anion engineering. △ Less

Submitted 26 July, 2021; originally announced July 2021.

Journal ref: Adv. Func. Mat. 2107135, (2021)

MechElastic: A Python Library for Analysis of Mechanical and Elastic Properties of Bulk and 2D Materials

Authors: Sobhit Singh, Logan Lang, Viviana Dovale-Farelo, Uthpala Herath, Pedram Tavadze, François-Xavier Coudert, Aldo H. Romero

Abstract: The MechElastic Python package evaluates the mechanical and elastic properties of bulk and 2D materials using the elastic coefficient matrix ($C_{ij}$) obtained from any ab-initio density-functional theory (DFT) code. The current version of this package reads the output of VASP, ABINIT, and Quantum Espresso codes (but it can be easily generalized to any other DFT code) and performs the appropriate… ▽ More The MechElastic Python package evaluates the mechanical and elastic properties of bulk and 2D materials using the elastic coefficient matrix ($C_{ij}$) obtained from any ab-initio density-functional theory (DFT) code. The current version of this package reads the output of VASP, ABINIT, and Quantum Espresso codes (but it can be easily generalized to any other DFT code) and performs the appropriate post-processing of elastic constants as per the requirement of the user. This program can also detect the input structure's crystal symmetry and test the mechanical stability of all crystal classes using the Born-Huang criteria. Various useful material-specific properties such as elastic moduli, longitudinal and transverse elastic wave velocities, Debye temperature, elastic anisotropy, 2D layer modulus, hardness, Pugh's ratio, Cauchy's pressure, Kleinman parameter, and Lame's coefficients, can be estimated using this program. Another existing feature of this program is to employ the ELATE package [J. Phys.: Condens. Matter 28, 275201 (2016)] and plot the spatial variation of several elastic properties such as Poisson's ratio, linear compressibility, shear modulus, and Young's modulus in three dimensions. Further, the MechElastic package can plot the equation of state (EOS) curves for energy and pressure for a variety of EOS models such as Murnaghan, Birch, Birch-Murnaghan, and Vinet, by reading the inputted energy/pressure versus volume data obtained via numerical calculations or experiments. This package is particularly useful for the high-throughput analysis of elastic and mechanical properties of materials. △ Less

Submitted 4 July, 2021; v1 submitted 8 December, 2020; originally announced December 2020.

Journal ref: Computer Physics Communications 267, 108068 (2021)

Experimental and Computational Studies of the Optical Properties of CuAl1-xFexO2

Authors: Mina Aziziha, Saeed Akbarshahi, Suresh Pittala, Sayandeep Ghosh, Rishmali Sooriyagoda, Aldo H. Romero, Subhash Thota, Alan D. Bristow, Mohindar S. Seehra, Matthew B. Johnson

Abstract: Delafossites are promising candidates for photocatalysis applications because of their chemical stability and absorption in the solar region of the electromagnetic spectrum. For example, CuAlO2 has good chemical stability but has a large indirect bandgap (~3 eV), so that efforts to improve its absorption in the solar region through alloying are investigated. The effect of dilute alloying on the op… ▽ More Delafossites are promising candidates for photocatalysis applications because of their chemical stability and absorption in the solar region of the electromagnetic spectrum. For example, CuAlO2 has good chemical stability but has a large indirect bandgap (~3 eV), so that efforts to improve its absorption in the solar region through alloying are investigated. The effect of dilute alloying on the optical absorption of powdered CuAl1-xFexO2 (x = 0.0-1.0) is measured and compared to electronic band structures calculations using a generalized gradient approximation with Hubbard exchange-correlation parameter and spin. A new absorption feature is observed at 1.8 eV for x = 0.01, which redshifts to 1.4 eV for x = 0.10. This feature is associated with transitions from the L-point valence band maximum to the Fe-3d state that appears below the conduction band of the spin-down band structure. The feature increases the optical absorption below the bandgap of pure CuAlO2, making dilute CuAl1-xFexO2 alloys better suited for solar photocatalysis. △ Less

Submitted 30 November, 2020; originally announced December 2020.

Optical Properties of Dilute CuAl$_{1-x}$Fe$_x$O$_2$ Delafossite Alloys

Authors: Mina Aziziha, S. Akbarshahi, S. Ghosh, P. Pramanik, A. H. Romero, S. Thota, S. Pittala, M. S. Seehra, M. B. Johnson

Abstract: For powder samples of CuAl$_{1-x}$Fe$_x$O$_2$ ($x =$ 0, 0.01, 0.05, and 0.1), measured optical properties are compared with model simulations and phonon spectra are compared with simulations based on weighted dynamical matrix approach. For powder samples of CuAl$_{1-x}$Fe$_x$O$_2$ ($x =$ 0, 0.01, 0.05, and 0.1), measured optical properties are compared with model simulations and phonon spectra are compared with simulations based on weighted dynamical matrix approach. △ Less

Submitted 17 August, 2020; v1 submitted 10 August, 2020; originally announced August 2020.

DMFTwDFT: An open-source code combining Dynamical Mean Field Theory with various Density Functional Theory packages

Authors: Vijay Singh, Uthpala Herath, Benny Wah, Xingyu Liao, Aldo H. Romero, Hyowon Park

Abstract: Dynamical Mean Field Theory (DMFT) is a successful method to compute the electronic structure of strongly correlated materials, especially when it is combined with density functional theory (DFT). Here, we present an open-source computational package (and a library) combining DMFT with various DFT codes interfaced through the Wannier90 package. The correlated subspace is expanded as a linear combi… ▽ More Dynamical Mean Field Theory (DMFT) is a successful method to compute the electronic structure of strongly correlated materials, especially when it is combined with density functional theory (DFT). Here, we present an open-source computational package (and a library) combining DMFT with various DFT codes interfaced through the Wannier90 package. The correlated subspace is expanded as a linear combination of Wannier functions introduced in the DMFT approach as local orbitals. In particular, we provide a library mode for computing the DMFT density matrix. This library can be linked and then internally called from any DFT package, assuming that a set of localized orbitals can be generated in the correlated subspace. The existence of this library allows developers of other DFT codes to interface with our package and achieve the charge-self-consistency within DFT+DMFT loops. To test and check our implementation, we computed the density of states and the band structure of well-known correlated materials, namely LaNiO3, SrVO3, and NiO. The obtained results are compared to those obtained from other DFT+DMFT implementations. △ Less

Submitted 31 January, 2020; originally announced February 2020.

Structural and electronic phenomena at oxyfluoride KTaO$_3$/K$M$F$_3$ ($M$ = Zn and Ni) superlattices: Rashba splitting and 2DEG

Authors: A. C. Garcia-Castro, R. Ospina, Philippe Ghosez, Eric Bousquet, Aldo H. Romero

Abstract: Here, we present the theoretical analysis of the structural and electronic degrees of freedom of two different oxide/fluoride perovskite superlattices, KTaO$_3$/KZnF$_3$ and KTaO$_3$/KNiF$_3$. Using first-principles calculations, we found the appearance of a two-dimensional electron, 2DEG, and hole, 2DHG, gases as a function of the number of layers of the different pristine materials. We demonstra… ▽ More Here, we present the theoretical analysis of the structural and electronic degrees of freedom of two different oxide/fluoride perovskite superlattices, KTaO$_3$/KZnF$_3$ and KTaO$_3$/KNiF$_3$. Using first-principles calculations, we found the appearance of a two-dimensional electron, 2DEG, and hole, 2DHG, gases as a function of the number of layers of the different pristine materials. We demonstrate that the phonon-dynamics at the KTO/K$M$F superlattices play a crucial role in the appearance of these effects. Additionally, our results reveal a rather sizeable Rashba-type spin-splitting at these interfaces in comparison to another oxide/oxide counterparts. △ Less

Submitted 4 September, 2019; originally announced September 2019.

PyProcar: A Python library for electronic structure pre/post-processing

Authors: Uthpala Herath, Pedram Tavadze, Xu He, Eric Bousquet, Sobhit Singh, Francisco Muñoz, Aldo H. Romero

Abstract: The PyProcar Python package plots the band structure and the Fermi surface as a function of site and/or s,p,d,f - projected wavefunctions obtained for each $k$-point in the Brillouin zone and band in an electronic structure calculation. This can be performed on top of any electronic structure code, as long as the band and projection information is written in the PROCAR format, as done by the VASP… ▽ More The PyProcar Python package plots the band structure and the Fermi surface as a function of site and/or s,p,d,f - projected wavefunctions obtained for each $k$-point in the Brillouin zone and band in an electronic structure calculation. This can be performed on top of any electronic structure code, as long as the band and projection information is written in the PROCAR format, as done by the VASP and ABINIT codes. PyProcar can be easily modified to read other formats as well. This package is particularly suitable for understanding atomic effects into the band structure, Fermi surface, spin texture, etc. PyProcar can be conveniently used in a command line mode, where each one of the parameters define a plot property. In the case of Fermi-surfaces, the package is able to plot the surface with colors depending on other properties such as the electron velocity or spin projection. The mesh used to calculate the property does not need to be the same as the one used to obtain the Fermi surface. A file with a specific property evaluated for each $k$-point in a $k-$mesh and for each band can be used to project other properties such as electron-phonon mean path, Fermi velocity, electron effective mass, etc. Another existing feature refers to the band unfolding of supercell calculations into predefined unit cells. △ Less

Submitted 26 June, 2019; originally announced June 2019.

Comments: 32 pages, 14 figures, Submitted to "Computer Physics Communications", project url: "https://github.com/romerogroup/pyprocar"

Lattice dynamics and phase stability of rhombohedral antimony under high pressure

Authors: Arianna Minelli, Sofia Michaela Souliou, Tra Nguyen-Thanh, Aldo Humberto Romero, Jorge Serrano, Wilfredo Ibarra Hernandez, Matthieu J. Verstraete, Vladimir Dmitriev, Alexei Bosak

Abstract: The high pressure lattice dynamics of rhombohedral antimony have been studied by a combination of diffuse scattering and inelastic x-ray scattering. The evolution of the phonon behavior as function of pressure was analyzed by means of two theoretical approaches: density functional perturbation theory and symmetry-based phenomenological phase transition analysis. This paper focuses on the first str… ▽ More The high pressure lattice dynamics of rhombohedral antimony have been studied by a combination of diffuse scattering and inelastic x-ray scattering. The evolution of the phonon behavior as function of pressure was analyzed by means of two theoretical approaches: density functional perturbation theory and symmetry-based phenomenological phase transition analysis. This paper focuses on the first structural phase transition, SbI-SbIV, and the role of vibrations in leading the transition. The phonon dispersion exhibits complex behaviour as one approaches the structural transition, with the branches, corresponding to the two transitions happening at high pressure in the Va elements (A7-to-BCC and A7-to-PC) both showing softening. △ Less

Submitted 6 May, 2019; originally announced May 2019.

Comments: 8 pages and 8 figures

Journal ref: Phys. Rev. B 100, 104305 (2019)

Low energy phases of bilayer Bi predicted by structure search in two dimensions

Authors: Sobhit Singh, Zeila Zanolli, Maximilian Amsler, B. Belhadji, Jorge O. Sofo, Matthieu J. Verstraete, Aldo H. Romero

Abstract: We employ an ab-initio structure search algorithm to explore the configurational space of Bi in quasi two dimensions. A confinement potential restricts the movement of atoms within a pre-defined thickness during structure search calculations within the minima hop** method to find the stable and metastable forms of bilayer Bi. In addition to recovering the two known low-energy structures (puckere… ▽ More We employ an ab-initio structure search algorithm to explore the configurational space of Bi in quasi two dimensions. A confinement potential restricts the movement of atoms within a pre-defined thickness during structure search calculations within the minima hop** method to find the stable and metastable forms of bilayer Bi. In addition to recovering the two known low-energy structures (puckered monoclinic and buckled hexagonal), our calculations predict three new structures of bilayer Bi. We call these structures the $α$, $β$, and $γ$ phases of bilayer Bi, which are, respectively, 63, 72, and 83 meV/atom higher in energy than that of the monoclinic ground state, and thus potentially synthesizable using appropriate substrates. We also compare the structural, electronic, and vibrational properties of the different phases. The puckered monoclinic, buckled hexagonal, and $β$ phases exhibit a semiconducting energy gap, whereas $α$ and $γ$ phases are metallic. We notice an unusual Mexican-hat type band dispersion leading to a van Hove singularity in the buckled hexagonal bilayer Bi. Notably, we find symmetry-protected topological Dirac points in the electronic spectrum of the $γ$ phase. The new structures suggest that bilayer Bi provides a novel playground to study distortion-mediated metal-insulator phase transitions. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Journal ref: J. Phys. Chem. Lett. 2019, 10, 23, 7324-7332

Proximity-induced topological transition and strain-induced charge transfer in graphene/MoS2 bilayer heterostructures

Authors: Sobhit Singh, Abdulrhman M. Alsharari, Sergio E. Ulloa, Aldo H. Romero

Abstract: Graphene/MoS2 heterostructures are formed by combining the nanosheets of graphene and monolayer MoS2. The electronic features of both constituent monolayers are rather well-preserved in the resultant heterostructure due to the weak van der Waals interaction between the layers. However, the proximity of MoS2 induces strong spin orbit coupling effect of strength ~1 meV in graphene, which is nearly t… ▽ More Graphene/MoS2 heterostructures are formed by combining the nanosheets of graphene and monolayer MoS2. The electronic features of both constituent monolayers are rather well-preserved in the resultant heterostructure due to the weak van der Waals interaction between the layers. However, the proximity of MoS2 induces strong spin orbit coupling effect of strength ~1 meV in graphene, which is nearly three orders of magnitude larger than the intrinsic spin orbit coupling of pristine graphene. This opens a bandgap in graphene and further causes anticrossings of the spin-nondegenerate bands near the Dirac point. Lattice incommensurate graphene/MoS2 heterostructure exhibits interesting moire' patterns which have been observed in experiments. The electronic bandstructure of heterostructure is very sensitive to biaxial strain and interlayer twist. Although the Dirac cone of graphene remains intact and no charge-transfer between graphene and MoS2 layers occurs at ambient conditions, a strain-induced charge-transfer can be realized in graphene/MoS2 heterostructure. Application of a gate voltage reveals the occurrence of a topological phase transition in graphene/MoS2 heterostructure. In this chapter, we discuss the crystal structure, interlayer effects, electronic structure, spin states, and effects due to strain and substrate proximity on the electronic properties of graphene/MoS2 heterostructure. We further present an overview of the distinct topological quantum phases of graphene/MoS2 heterostructure and review the recent advancements in this field. △ Less

Submitted 29 June, 2018; originally announced June 2018.

Comments: 31 pages, 12 figures

Journal ref: book chapter in, Handbook of Graphene Set (2019)

Topological Thermoelectricity in Metals

Authors: Sobhit Singh, QuanSheng Wu, Changming Yue, Aldo H. Romero, Alexey A. Soluyanov

Abstract: Recently published discoveries of acoustic and optical mode inversion in the phonon spectrum of certain metals became the first realistic example of non-interacting topological bosonic excitations in existing materials. However, the observable physical and technological use of such topological phonon phases remained unclear. In this work we provide a strong theoretical and numerical evidence that… ▽ More Recently published discoveries of acoustic and optical mode inversion in the phonon spectrum of certain metals became the first realistic example of non-interacting topological bosonic excitations in existing materials. However, the observable physical and technological use of such topological phonon phases remained unclear. In this work we provide a strong theoretical and numerical evidence that for a class of metallic compounds (known as triple point topological metals), the points in the phonon spectrum, at which three (two optical and one acoustic) phonon modes (bands) cross, represent a well-defined topological material phase, in which the hosting metals have very strong thermoelectric response. The triple point bosonic collective excitations appearing due to these topological phonon band-crossing points significantly suppress the lattice thermal conductivity, making such metals phonon-glass like. At the same time, the topological triple-point and Weyl fermionic quasiparticle excitations present in these metals yield good electrical transport (electron-crystal) and cause a local enhancement in the electronic density of states near the Fermi level, which considerably improves the thermopower. This combination of "phonon-glass" and "electron-crystal" is the key for high thermoelectric performance in metals. We call these materials topological thermoelectric metals and propose several newly predicted compounds for this phase (TaSb and TaBi). We hope that this work will lead researchers in physics and materials science to the detailed study of topological phonon phases in electronic materials, and the possibility of these phases to introduce novel and more efficient use of thermoelectric materials in many everyday technological applications. △ Less

Submitted 2 July, 2018; v1 submitted 29 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. Materials 2, 114204 (2018)

Direct magnetization-polarization coupling in BaCuF$_4$ fluoride

Authors: A. C. Garcia-Castro, W. Ibarra-Hernandez, Eric Bousquet, Aldo H. Romero

Abstract: Despite oxides and some fluorides perovskites have emerged as prototypes of multiferroic and magnetoelectric materials, they have not impacted real devices. Unfortunately, their working temperatures are very low and the magnetoelectric coupling has been reported to be rather small. Herewith, we report from first-principles calculations an ideal magnetization reversal through polarization switching… ▽ More Despite oxides and some fluorides perovskites have emerged as prototypes of multiferroic and magnetoelectric materials, they have not impacted real devices. Unfortunately, their working temperatures are very low and the magnetoelectric coupling has been reported to be rather small. Herewith, we report from first-principles calculations an ideal magnetization reversal through polarization switching in BaCuF$_4$ which, according to our results, could be achieved close to room temperature. We also show that this ideal coupling is driven by a soft mode that combines both, polarization and octahedral rotation. The later being directly coupled to the weak ferromagnetism of BaCuF$_4$. This, added to its strong Jahn-Teller distortion and its orbital ordering, makes this material as a very appealing prototype for crystals in the $ABX_4$ family in multifunctional applications. △ Less

Submitted 4 April, 2018; originally announced April 2018.

Journal ref: Phys. Rev. Lett. 121, 117601 (2018)

First-principles investigation of graphene/MoS2 bilayer heterostructures using Tkatchenko-Scheffler van der Waals method

Authors: Sobhit Singh, Camilo Espejo, Aldo H. Romero

Abstract: Graphene/MoS$_2$ van der Waals (vdW) heterostructures have promising technological applications due to their unique properties and functionalities. Many experimental and theoretical research groups across the globe have made outstanding contributions to benchmark the properties of graphene/MoS$_2$ heterostructures. Even though some research groups have already made an attempt to model the graphene… ▽ More Graphene/MoS$_2$ van der Waals (vdW) heterostructures have promising technological applications due to their unique properties and functionalities. Many experimental and theoretical research groups across the globe have made outstanding contributions to benchmark the properties of graphene/MoS$_2$ heterostructures. Even though some research groups have already made an attempt to model the graphene/MoS$_2$ heterostructures using {\it first-principles} calculations, there exists several discrepancies in the results from different theoretical research groups and the experimental findings. In the present work, we revisit this problem by first principles approach and address the existing discrepancies about the interlayer spacing between graphene and MoS$_2$ monolayers in graphene/MoS$_2$ heterostructures, and the location of Dirac points near Fermi-level. We find that the Tkatchenko--Scheffler method efficiently evaluates the long-range vdW interactions and accurately predicts interlayer spacing between graphene and MoS$_2$ sheets. We further investigate the electronic, mechanical and vibrational properties of the optimized graphene/MoS$_2$ heterostructures created using 5$\times$5/4$\times$4 and 4$\times$4/3$\times$3 supercell geometries having different magnitudes of lattice mismatch. The effect of the varying interlayer spacing on the electronic properties of heterostructures is discussed. Our phonon calculations reveal that the interlayer shear and breathing phonon modes, which are very sensitive to the weak vdW interactions, play vital role in describing the thermal properties of the studied systems. The thermodynamic and elastic properties of heterostructures are further discussed. A comparison between our results and the results reported from other research groups is presented. △ Less

Submitted 21 September, 2018; v1 submitted 12 February, 2018; originally announced February 2018.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev. B 98, 155309 (2018)

Effect of spin-orbit coupling on the elastic, mechanical, and thermodynamic properties of Bi-Sb binaries

Authors: Sobhit Singh, Irais Valencia-Jaime, Olivia Pavlic, Aldo H. Romero

Abstract: Using first principles calculations, we systematically study the elastic stiffness constants, mechanical properties, elastic wave velocities, Debye temperature, melting temperature, and specific heat of several thermodynamically stable crystal structures of Bi$_{x}$Sb$_{1-x}$ ($0 < x < 1$) binaries, which are of great interest due to their numerous inherent rich properties, such as thermoelectrici… ▽ More Using first principles calculations, we systematically study the elastic stiffness constants, mechanical properties, elastic wave velocities, Debye temperature, melting temperature, and specific heat of several thermodynamically stable crystal structures of Bi$_{x}$Sb$_{1-x}$ ($0 < x < 1$) binaries, which are of great interest due to their numerous inherent rich properties, such as thermoelectricity, thermomagnetic cooling, strong spin-orbit coupling (SOC) effects, and topological features in the electronic bandstructure. We analyze the bulk modulus ($B$), Young's modulus ($E$), shear modulus ($G$), $B/G$ ratio, and Poisson's ratio ($ν$) as a function of the Bi concentration in Bi$_{x}$Sb$_{1-x}$. The effect of SOC on above mentioned properties is further investigated. In general, we observe that the SOC effects cause elastic softening in most of the studied structures. Three monoclinic structures of Bi-Sb binaries are found to exhibit significantly large auxeticity. The Debye temperature and the magnitude of the elastic wave velocities monotonically decrease with increasing Bi-concentration. We also discuss the specific heat capacity versus temperature data for all studied binaries. Our theoretical results are in excellent agreement with the existing experimental and theoretical data. The comprehensive understanding of the material properties such as hardness, mechanical strength, melting temperature, propagation of the elastic waves, auxeticity, and heat capacity is vital for practical applications of the studied binaries. △ Less

Submitted 2 February, 2018; v1 submitted 1 December, 2017; originally announced December 2017.

Comments: 11 pages, 5 figures

Journal ref: Phys. Rev. B 97, 054108 (2018)

Giant tunable Rashba spin splitting in two-dimensional BiSb monolayer and BiSb/AlN heterostructures

Authors: Sobhit Singh, Aldo H. Romero

Abstract: Search of novel two-dimensional giant Rashba semiconductors is a crucial step in the development of the forthcoming nano-spintronics technology. Using first-principle calculations, we study a stable two-dimensional crystal phase of BiSb having buckled honeycomb lattice geometry, which is yet unexplored. The phonon, room temperature molecular dynamics and elastic constant calculations verify the dy… ▽ More Search of novel two-dimensional giant Rashba semiconductors is a crucial step in the development of the forthcoming nano-spintronics technology. Using first-principle calculations, we study a stable two-dimensional crystal phase of BiSb having buckled honeycomb lattice geometry, which is yet unexplored. The phonon, room temperature molecular dynamics and elastic constant calculations verify the dynamical and mechanical stability of the monolayer at 0~K and at room temperature. The calculated electronic bandstructure reveals the direct bandgap semiconducting nature of BiSb monolayer with presence of highly mobile two-dimensional electron gas (2DEG) near Fermi-level. Inclusion of spin-orbit coupling (SOC) yields the giant Rashba spin-splitting of 2DEG near Fermi-level. The calculated Rashba energy and Rashba splitting constant are 13 meV and 2.3 eVÅ, respectively. The strength of the Rashba splitting is amongst the largest yet known 2D Rashba semiconductors. We demonstrate that the strength of the Rashba spin-splitting can be significantly tuned by applying in-plane bi-axial strain on the BiSb monolayer. Presence of the giant Rashba spin-splitting together with the large electronic bandgap (1.6 eV) makes this system of peculiar interest for optoelectronics applications. Furthermore, we study the electronic properties of BiSb/AlN heterostructures having a lattice mismatch of 1.3\% at the interface. Our results suggest that BiSb monolayer and heterostructure systems could be potentially used to develop highly efficient spin field-effect transistors, optoelectronics and nano-spintronics devices. Thus, this comprehensive study of two-dimensional BiSb systems can expand the range of possible applications in the future spintronics technology. △ Less

Submitted 22 January, 2017; originally announced January 2017.

Journal ref: Phys. Rev. B 95, 165444 (2017)

Prediction of a controllable Weyl semi-metallic phase in inversion-asymmetric BiSb

Authors: Sobhit Singh, A. C. Garcia-Castro, Irais Valencia-Jaime, Francisco Muñoz, Aldo H. Romero

Abstract: Recent experimental realization of long sought Weyl fermions in non-magnetic crystals has greatly motivated condensed matter physicists to search for materials supporting Weyl fermions. Weyl fermions appear to be very promising for future electronics, often referred as Weyltronics. Here, by means of first-principle calculations, we report a stoichiometric crystal structure of BiSb with broken spac… ▽ More Recent experimental realization of long sought Weyl fermions in non-magnetic crystals has greatly motivated condensed matter physicists to search for materials supporting Weyl fermions. Weyl fermions appear to be very promising for future electronics, often referred as Weyltronics. Here, by means of first-principle calculations, we report a stoichiometric crystal structure of BiSb with broken space-inversion symmetry. This structure is insulating in bulk and has non-trivial band topology. We observe a pressure driven Weyl semi-metallic phase transition in this crystal structure. The obtained Weyl semi-metallic phase exists in the 4.0 - 6.0 GPa pressure range. We find that a total 6 pairs of Weyl points, 6 monopoles and 6 antimonopoles, exist in the Brillouin zone. The Weyl points with opposite chirality are located at different energy values yielding separate electron and hole Fermi-surfaces. Additionally, the spin-texture of the bulk BiSb compound appears to be electrically controllable when the interlink between pressure and an electric field is exploited. This produces novel manipulable topological transport properties in this system which are very promising for implementation of this kind of materials in next-generation Weyltronics and spintronic devices. △ Less

Submitted 10 March, 2016; v1 submitted 2 December, 2015; originally announced December 2015.

Comments: 8 Pages, 4 Figures

Journal ref: Phys. Rev. B 94, 161116(R) 2016

Spin-texture induced by oxygen vacancies in Strontium perovskites (001) surfaces: A theoretical comparison between SrTiO3 and SrHfO3

Authors: A. C. Garcia-Castro, M. G. Vergniory, E. Bousquet, A. H. Romero

Abstract: The electronic structure of SrTiO3 and SrHfO3 (001) surfaces with oxygen vacancies is studied by means of first-principles calculations. We reveal how oxygen vacancies within the first atomic layer of the SrTiO3 surface (i) induce a large antiferrodistortive motion of the oxygen octahedra at the surface, (ii) drive localized magnetic moments on the Ti-3d orbitals close to the vacancies and (iii) f… ▽ More The electronic structure of SrTiO3 and SrHfO3 (001) surfaces with oxygen vacancies is studied by means of first-principles calculations. We reveal how oxygen vacancies within the first atomic layer of the SrTiO3 surface (i) induce a large antiferrodistortive motion of the oxygen octahedra at the surface, (ii) drive localized magnetic moments on the Ti-3d orbitals close to the vacancies and (iii) form a two-dimensional electron gas localized within the first layers. The analysis of the spin-texture of this system exhibits a splitting of the energy bands according to the Zeeman interaction, lowering of the Ti-3dxy level in comparison with dxz and dyz and also an in-plane precession of the spins. No Rashba-like splitting for the ground state neither for ab-initio molecular dynamics trajectory at 400K is recognized as suggested recently by A. F. Santander-Syro et al. [1]. Instead, a sizeable Rashba-like splitting is observed when the Ti atom is replaced by a heavier Hf atom with a much larger spin-orbit interaction. However, we observe the disappearance of the magnetism and the surface two dimensional electron gas when full structural optimization of the SrHfO3 surface is performed. Our results uncover the sensitive interplay of spin-orbit coupling, atomic relaxations and magnetism when tuning these Sr-based perovskites. △ Less

Submitted 25 November, 2015; originally announced November 2015.

Journal ref: Phys. Rev. B 93, 045405 (2016)

Strain engineering multiferroism in Pnma NaMnF3 fluoroperovskite

Authors: A. C. Garcia-Castro, A. H. Romero, E. Bousquet

Abstract: In this study we show from first principles calculations the possibility to induce multiferroic and magnetoelectric functional properties in the Pnma NaMnF3 fluoroperovskite by means of epitaxial strain engineering. Surprisingly, we found a very strong non-linear polarization-strain coupling that drives an atypical amplification of the ferroelectric polarization for either compression or expansion… ▽ More In this study we show from first principles calculations the possibility to induce multiferroic and magnetoelectric functional properties in the Pnma NaMnF3 fluoroperovskite by means of epitaxial strain engineering. Surprisingly, we found a very strong non-linear polarization-strain coupling that drives an atypical amplification of the ferroelectric polarization for either compression or expansion of the cell. This property is associated with a non-collinear antiferromagnetic ordering, which induces a weak ferromagnetism and thus, making the strained NaMnF3 fluoroperovskite multiferroic. We also calculate the magnetoelectric response and we found it to be composed by linear and non-linear components with amplitudes similar to the ones of Cr2O3. These properties show that it is possible to move the fluoride family toward functional applications with unique responses. △ Less

Submitted 12 November, 2015; originally announced November 2015.

Journal ref: Phys. Rev. Lett. 116, 117202 (2016)

Electronic transport properties of (fluorinated) metal phthalocyanine

Authors: M. M. Fadlallah, U. Eckern, A. H. Romero, U. Schwingenschlögl

Abstract: The magnetic and transport properties of the metal phthalocyanine (MPc) and F$_{16}$MPc (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn and Ag) families of molecules in contact with S-Au wires are investigated by density functional theory within the local density approximation, including local electronic correlations on the central metal atom. The magnetic moments are found to be considerably modified… ▽ More The magnetic and transport properties of the metal phthalocyanine (MPc) and F$_{16}$MPc (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn and Ag) families of molecules in contact with S-Au wires are investigated by density functional theory within the local density approximation, including local electronic correlations on the central metal atom. The magnetic moments are found to be considerably modified under fluorination. In addition, they do not depend exclusively on the configuration of the outer electronic shell of the central metal atom (as in isolated MPc and F$_{16}$MPc) but also on the interaction with the leads. Good agreement between the calculated conductance and experimental results is obtained. For M = Ag, a high spin filter efficiency and conductance is observed, giving rise to a potentially high sensitivity for chemical sensor applications. △ Less

Submitted 27 November, 2015; v1 submitted 9 February, 2015; originally announced February 2015.

Comments: 8 pages (two-column), 8 figures

Journal ref: New J. Phys. 18, 013003 (2016)

First-Principles study of vibrational and non-collinear magnetic properties of the perovskite to post-perovskite pressure transition of NaMnF3

Authors: A. C. Garcia-Castro, A. H. Romero, E. Bousquet

Abstract: We performed a first-principles study of the structural, vibrational, electronic and magnetic properties of NaMnF3 under applied isotropic pressure. We found that NaMnF3 undergoes a reconstructive phase transition at 8 GPa from the Pnma distorted perovskite structure toward the Cmcm post-perovskite structure. This is confirmed by a sudden change of the Mn-F-Mn bondings where the crystal goes from… ▽ More We performed a first-principles study of the structural, vibrational, electronic and magnetic properties of NaMnF3 under applied isotropic pressure. We found that NaMnF3 undergoes a reconstructive phase transition at 8 GPa from the Pnma distorted perovskite structure toward the Cmcm post-perovskite structure. This is confirmed by a sudden change of the Mn-F-Mn bondings where the crystal goes from corner shared octahedra in the Pnma phase to edge shared octahedra in the Cmcm phase. The magnetic ordering also changes from a G-type antiferromagnetic ordering in the Pnma phase to a C-type antiferromagnetic ordering in the Cmcm phase. Interestingly, we found that the high-spin d-orbital filling is kept at the phase transition which has never been observed in the known magnetic post-perovskite structures. We also found a highly non-collinear magnetic ordering in the Cmcm post-perovskite phase that drives a large ferromagnetic canting of the spins. We discuss the validity of these results with respect to the U and J parameter of the GGA+U exchange correlation functional used in our study and conclude that large spin canting is a promising property of the post-perovskite fluoride compounds. △ Less

Submitted 11 July, 2014; originally announced July 2014.

Thermal Anharmonic Effects in PbTe from First Principles

Authors: A. H. Romero, E. K. U. Gross, M. J. Verstraete, Olle Hellman

Abstract: We investigate the harmonic and anharmonic contributions to the phonon spectrum of lead telluride, and perform a complete characterization of how the anharmonic effects dominate the phonons in PbTe as temperature increases. This effect is the strongest factor in the favorable thermoelectric properties of PbTe: an optical-acoustic phonon band crossing reduces the speed of sound and the intrinsic th… ▽ More We investigate the harmonic and anharmonic contributions to the phonon spectrum of lead telluride, and perform a complete characterization of how the anharmonic effects dominate the phonons in PbTe as temperature increases. This effect is the strongest factor in the favorable thermoelectric properties of PbTe: an optical-acoustic phonon band crossing reduces the speed of sound and the intrinsic thermal conductivity. We present the detailed temperature dependence of the dispersion relation and compare our calculated neutron scattering cross section with recent experimental measurements. We analyze the thermal resistivity's variation with temperature and clarify misconceptions about existing experimental literature. This quantitative prediction opens the way to phonon phase space engineering, to tailor the lifetimes of crucial heat carrying phonons. △ Less

Submitted 22 February, 2014; originally announced February 2014.

Element-Resolved Corrosion Analysis of Stainless-Type Glass-Forming Steels

Authors: M. J. Duarte, J. Klemm, S. O. Klemm, K. J. J. Mayrhofer, M. Stratmann, S. Borodin, A. H. Romero, M. Madinehe, D. Crespo, J. Serrano, S. S. A. Gerstl, P. P. Choi, D. Raabe, F. U. Renner

Abstract: Ultrathin passive films effectively prevent the chemical attack of stainless steel grades in corrosive environments; their stability critically depends on the interplay between structure and chemistry of the constituents Fe-Cr-Mo. In particular, nanoscale inhomogeneities along the surface can have a tremendous impact on material failure, but are yet barely understood. Addressing a stainless-type g… ▽ More Ultrathin passive films effectively prevent the chemical attack of stainless steel grades in corrosive environments; their stability critically depends on the interplay between structure and chemistry of the constituents Fe-Cr-Mo. In particular, nanoscale inhomogeneities along the surface can have a tremendous impact on material failure, but are yet barely understood. Addressing a stainless-type glass-forming Fe50Cr15Mo14C15B6 alloy and utilizing a combination of complementary high-resolution analytical techniques, we relate near-atomistic insight into different gradual nanostructures with time- and element-resolved dissolution behavior. The progressive elemental segregation on the nanoscale is followed in its influence on the concomitant degree of passivity. A detrimental transition from Cr-controlled passivity to Mo-controlled breakdown is dissected atom-by-atom demonstrating the importance of nanoscale knowledge for understanding corrosion. △ Less

Submitted 13 February, 2014; originally announced February 2014.

Journal ref: Science volume 341, 372 (2013)

Geometric Ferroelectricity in Fluoro-Perovskites

Authors: A. C. Garcia-Castro, N. A. Spaldin, A. H. Romero, E. Bousquet

Abstract: We used first-principles calculations to investigate the existence and origin of the ferroelectric in- stability in the ABF3 fluoro-perovskites. We find that many fluoro-perovskites have a ferroelectric instability in their high symmetry cubic structure, which is of similar amplitude to that commonly found in oxide perovskites. In contrast to the oxides, however, the fluorides have nominal Born ef… ▽ More We used first-principles calculations to investigate the existence and origin of the ferroelectric in- stability in the ABF3 fluoro-perovskites. We find that many fluoro-perovskites have a ferroelectric instability in their high symmetry cubic structure, which is of similar amplitude to that commonly found in oxide perovskites. In contrast to the oxides, however, the fluorides have nominal Born effective charges, indicating a different mechanism for the instability. We show that the instability originates from ionic size effects, and is therefore in most cases largely insensitive to pressure and strain, again in contrast to the oxide perovskites. An exception is NaMnF3, where coherent epitaxial strain matching to a substrate with equal in-plane lattice constants destabilizes the bulk Pnma structure leading to a ferroelectric, and indeed multiferroic, ground state with an unusual polarization/strain response. △ Less

Submitted 9 November, 2013; originally announced November 2013.

Magnetic, electronic and vibrational properties of metal and fluorinated metal phthalocyanines

Authors: O. I. Arillo-Flores, M. M. Fadlallah, C. Schuster, U. Eckern, A. H. Romero

Abstract: The magnetic and electronic properties of metal phthalocyanines (MPc) and fluorinated metal phthalocyanines (F$_{16}$MPc) are studied by means of spin density functional theory (SDFT). Several metals (M) such as Ca, all first d-row transition metals and Ag are investigated. By considering different open shell transition metals it is possible to tune the electronic properties of MPc, in particular… ▽ More The magnetic and electronic properties of metal phthalocyanines (MPc) and fluorinated metal phthalocyanines (F$_{16}$MPc) are studied by means of spin density functional theory (SDFT). Several metals (M) such as Ca, all first d-row transition metals and Ag are investigated. By considering different open shell transition metals it is possible to tune the electronic properties of MPc, in particular the electronic molecular gap and total magnetic moment. Besides assigning the structural and electronic properties of MPc and F$_{16}$MPc, the vibrational modes analysis of the ScPc\textendash ZnPc series have been studied and correlated to experimental measurements when available. △ Less

Submitted 5 February, 2013; originally announced February 2013.

Comments: 28 pages (preprint style), several figures

Journal ref: Phys. Rev. B 87, 165115 (2013)

Vibrational and Thermal Properties of ZnX (X=Se, Te): Density Functional Theory (LDA and GGA) versus Experiment

Authors: R. K. Kremer, M. Cardona, R. Lauck, G. Siegle, A. H. Romero

Abstract: We calculated the phonon dispersion relations of ZnX (X=Se, Te) employing ab initio techniques. These relations have been used to evaluate the temperature dependence of the respective specific heats of crystals with varied isotopic compositions. These results have been compared with mea- surements performed on crystals down to 2 K. The calculated and measured data are generally in excellent agreem… ▽ More We calculated the phonon dispersion relations of ZnX (X=Se, Te) employing ab initio techniques. These relations have been used to evaluate the temperature dependence of the respective specific heats of crystals with varied isotopic compositions. These results have been compared with mea- surements performed on crystals down to 2 K. The calculated and measured data are generally in excellent agreement with each other. Trends in the phonon dispersion relations and the correspond- ing densities of states for the zinc chalcogenide series of zincblende-type materials are discussed. △ Less

Submitted 9 December, 2011; originally announced December 2011.

Comments: 10 pages, submitted to PRB

Electronic and phononic properties of the chalcopyrite CuGaS2

Authors: A. H. Romero, M. Cardona, R. K. Kremer, R. Lauck, G. Siegle, C. Hoch, A. Munoz, A. Schindler

Abstract: The availability of ab initio electronic calculations and the concomitant techniques for deriving the corresponding lattice dynamics have been profusely used for calculating thermodynamic and vibrational properties of semiconductors, as well as their dependence on isotopic masses. The latter have been compared with experimental data for elemental and binary semiconductors with different isotopic c… ▽ More The availability of ab initio electronic calculations and the concomitant techniques for deriving the corresponding lattice dynamics have been profusely used for calculating thermodynamic and vibrational properties of semiconductors, as well as their dependence on isotopic masses. The latter have been compared with experimental data for elemental and binary semiconductors with different isotopic compositions. Here we present theoretical and experimental data for several vibronic and thermodynamic properties of CuGa2, a canonical ternary semiconductor of the chalcopyrite family. Among these properties are the lattice parameters, the phonon dispersion relations and densities of states (projected on the Cu, Ga, and S constituents), the specific heat and the volume thermal expansion coefficient. The calculations were performed with the ABINIT and VASP codes within the LDA approximation for exchange and correlation and the results are compared with data obtained on samples with the natural isotope composition for Cu, Ga and S, as well as for isotope enriched samples. △ Less

Submitted 3 February, 2011; originally announced February 2011.

Comments: 9 pages, 8 Figures, submitted to Phys. Rev B

Electronic and phononic properties of cinnabar: ab initio calculations and some experimental results

Authors: M. Cardona, R. K. Kremer, R. Lauck, G. Siegle, A. Munoz, A. H. Romero, M. Schmidt

Abstract: We report ab initio calculations of the electronic band structure, the corresponding optical spectra, and the phonon dispersion relations of trigonal alpha-HgS (cinnabar). The calculated dielectric functions are compared with unpublished optical measurements by Zallen and coworkers. The phonon dispersion relations are used to calculate the temperature and isotopic mass dependence of the specific h… ▽ More We report ab initio calculations of the electronic band structure, the corresponding optical spectra, and the phonon dispersion relations of trigonal alpha-HgS (cinnabar). The calculated dielectric functions are compared with unpublished optical measurements by Zallen and coworkers. The phonon dispersion relations are used to calculate the temperature and isotopic mass dependence of the specific heat which has been compared with experimental data obtained on samples with the natural isotope abundances of the elements Hg and S (natural minerals and vapor phase grown samples) and on samples prepared from isotope enriched elements by vapor phase transport. Comparison of the calculated vibrational frequencies with Raman and ir data is also presented. Contrary to the case of cubic beta-HgS (metacinnabar), the spin-orbit splitting of the top valence bands at the Gamma-point of the Brillouin zone (Delta_0) is positive, because of a smaller admixture of 5d core electrons of Hg. Calculations of the lattice parameters, and the pressure dependence of Delta_0 and the corresponding direct gap E_0~2eV are also presented. The lowest absorption edge is confirmed to be indirect. △ Less

Submitted 13 July, 2010; originally announced July 2010.

Comments: 13 pages, 15 figures

Pulse propagation in a chain of o-rings with and without precompression

Authors: Italo'Ivo Lima Dias Pinto, Alexandre Rosas, Aldo H. Romero, Katja Lindenberg

Abstract: We implement a binary collision approximation to study pulse propagation in a chain of o-rings. In particular, we arrive at analytic results from which the pulse velocity is obtained by simple quadrature. The predicted pulse velocity is compared to the velocity obtained from the far more resource-intensive numerical integration of the equations of motion. We study chains without precompression, ch… ▽ More We implement a binary collision approximation to study pulse propagation in a chain of o-rings. In particular, we arrive at analytic results from which the pulse velocity is obtained by simple quadrature. The predicted pulse velocity is compared to the velocity obtained from the far more resource-intensive numerical integration of the equations of motion. We study chains without precompression, chains precompressed by a constant force at the chain ends (constant precompression), and chains precompressed by gravity (variable precompression). The application of the binary collision approximation to precompressed chains provides an important generalization of a successful theory that had up to this point only been implemented to chains without precompression, that is, to chains in a sonic vacuum. △ Less

Submitted 21 June, 2010; originally announced June 2010.

Pulse propagation in decorated random chains

Authors: Upendra Harbola, Alexandre Rosas, Aldo H. Romero, Katja Lindenberg

Abstract: We study pulse propagation in one-dimensional chains of spherical granules decorated with small randomly-sized granules placed between bigger monodisperse ones. Such "designer chains" are of interest in efforts to control the behavior of the pulse so as to optimize its propagation or attenuation, depending on the desired application. We show that a recently proposed effective description of simp… ▽ More We study pulse propagation in one-dimensional chains of spherical granules decorated with small randomly-sized granules placed between bigger monodisperse ones. Such "designer chains" are of interest in efforts to control the behavior of the pulse so as to optimize its propagation or attenuation, depending on the desired application. We show that a recently proposed effective description of simple decorated chains can be extended to predict pulse properties in chains decorated with small granules of randomly chosen radii. Furthermore, we also show that the binary collision approximation can again be used to provide analytic results for this system. △ Less

Submitted 5 May, 2010; originally announced May 2010.

High-pressure phase transitions and compressibility of wolframite-type tungstates

Authors: J. Ruiz-Fuertes, S. Lopez-Moreno, D. Errandonea, J. Pellicer-Porres, R. Lacomba-Perales, A. Segura, P. Rodriguez-Hernandez, A. Munoz, A. H. Romero, J. Gonzalez

Abstract: This paper reports an investigation on the phase diagram and compressibility of wolframite-type tungstates by means of x-ray powder diffraction and absorption in a diamond-anvil cell and ab initio calculations. The diffraction experiments show that monoclinic wolframite-type MgWO4 suffers at least two phase transitions, the first one being to a triclinic polymorph with a structure similar to tha… ▽ More This paper reports an investigation on the phase diagram and compressibility of wolframite-type tungstates by means of x-ray powder diffraction and absorption in a diamond-anvil cell and ab initio calculations. The diffraction experiments show that monoclinic wolframite-type MgWO4 suffers at least two phase transitions, the first one being to a triclinic polymorph with a structure similar to that of CuWO4 and FeMoO4-II. The onset of each transition is detected at 17.1 and 31 GPa. In ZnWO4 the onset of the monoclinic-triclinic transition has been also found at 15.1 GPa. These findings are supported by density-functional theory calculations, which predict the occurrence of additional transitions upon further compression. Calculations have been also performed for wolframite-type MnWO4, which is found to have an antiferromagnetic configuration. In addition, x-ray absorption and diffraction experiments as well as calculations reveal details of the local-atomic compression in the studied compounds. In particular, below the transition pressure the ZnO6 and equivalent polyhedra tend to become more regular, whereas the WO6 octahedra remain almost unchanged. Fitting the pressure-volume data we obtained the equation of state for the low-pressure phase of MgWO4 and ZnWO4. These and previous results on MnWO4 and CdWO4 are compared with the calculations, being the compressibility of wolframite-type tungstates systematically discussed. Finally Raman spectroscopy measurements and lattice dynamics calculations are presented for MgWO4. △ Less

Submitted 30 November, 2009; originally announced November 2009.

Comments: 36 pages, 12 figures, 5 tables

Journal ref: JOURNAL OF APPLIED PHYSICS 107, 083506 (2010)

Electronic, vibrational, and thermodynamic properties of ZnS (zincblende and rocksalt structure)

Authors: M. Cardona, R. K. Kremer, R. Lauck, G. Siegle, A. Munoz, A. H. Romero, A. Schindler

Abstract: We have measured the specific heat of zincblende ZnS for several isotopic compositions and over a broad temperature range (3 to 1100 K). We have compared these results with calculations based on ab initio electronic band structures, performed using both LDA and GGA exchange- correlation functionals. We have compared the lattice dynamics obtained in this manner with experimental data and have cal… ▽ More We have measured the specific heat of zincblende ZnS for several isotopic compositions and over a broad temperature range (3 to 1100 K). We have compared these results with calculations based on ab initio electronic band structures, performed using both LDA and GGA exchange- correlation functionals. We have compared the lattice dynamics obtained in this manner with experimental data and have calculated the one-phonon and two-phonon densities of states. We have also calculated mode Grueneisen parameters at a number of high symmetry points of the Brillouin zone. The electronic part of our calculations has been used to investigate the effect of the 3d core electrons of zinc on the spin-orbit splitting of the top valence bands. The effect of these core electrons on the band structure of the rock salt modification of ZnS is also discussed. △ Less

Submitted 26 November, 2009; originally announced November 2009.

Comments: 33pages, 16 Figures, submitted to Phys. Rev. B

Pulse propagation in decorated granular chains: An analytical approach

Authors: Upendra Harbola, Alexandre Rosas, Aldo H. Romero, Massimiliano Esposito, Katja Lindenberg

Abstract: We study pulse propagation in one-dimensional chains of spherical granules decorated with small grains placed between large granules. The effect of the small granules can be captured by replacing the decorated chains by undecorated chains of large granules of appropriately renormalized mass and effective interaction between the large granules. This allows us to obtain simple analytic expressions… ▽ More We study pulse propagation in one-dimensional chains of spherical granules decorated with small grains placed between large granules. The effect of the small granules can be captured by replacing the decorated chains by undecorated chains of large granules of appropriately renormalized mass and effective interaction between the large granules. This allows us to obtain simple analytic expressions for the pulse propagation properties using a generalization of the binary collision approximation introduced in our earlier work [Phys. Rev. E in print (2009); Phys. Rev. E {\bf 69}, 037601 (2004)] △ Less

Submitted 14 September, 2009; originally announced September 2009.

Comments: 10 pages and 12 figures