Showing 1–40 of 40 results for author: Rolland, A

Probabilistic Models of Profiles for Voting by Evaluation

Authors: Antoine Rolland, Jean-Baptiste Aubin, Irène Gannaz, Samuela Leoni

Abstract: Considering voting rules based on evaluation inputs rather than preference rankings modifies the paradigm of probabilistic studies of voting procedures. This article proposes several simulation models for generating evaluation-based voting inputs. These models can cope with dependent and non identical marginal distributions of the evaluations received by the candidates. A last part is devoted to f… ▽ More Considering voting rules based on evaluation inputs rather than preference rankings modifies the paradigm of probabilistic studies of voting procedures. This article proposes several simulation models for generating evaluation-based voting inputs. These models can cope with dependent and non identical marginal distributions of the evaluations received by the candidates. A last part is devoted to fitting these models to real data sets. △ Less

Submitted 15 March, 2024; originally announced March 2024.

Brillouin laser-driven terahertz oscillator up to 3 THz with femtosecond-level timing jitter

Authors: Brendan M Heffernan, James Greenberg, Takashi Hori, Tatsuya Tanigawa, Antoine Rolland

Abstract: The terahertz (THz) frequency range, spanning 0.1 to 10 THz, is a field ripe for innovation with vast, develo** potential in areas like wireless communication and molecular spectroscopy. Our work introduces a dual-wavelength laser design that utilizes stimulated Brillouin scattering in an optical fiber cavity to effectively generate two highly coherent optical Stokes waves with differential phas… ▽ More The terahertz (THz) frequency range, spanning 0.1 to 10 THz, is a field ripe for innovation with vast, develo** potential in areas like wireless communication and molecular spectroscopy. Our work introduces a dual-wavelength laser design that utilizes stimulated Brillouin scattering in an optical fiber cavity to effectively generate two highly coherent optical Stokes waves with differential phase noise inherently mitigated. To guarantee robust operation, the Stokes waves are optically injected into their respective pump lasers, which also serves to greatly improve the resulting coherence. The frequency difference between the two wavelengths is converted into THz waves through a uni-traveling-carrier photodiode. This innovative design facilitates the generation of THz waves with phase noise levels of less than -100 dBc/Hz, translating to timing noise below 10~$\mathrm{as} / \sqrt{\mathrm{Hz}}$ at 10 kHz Fourier frequency, over a carrier frequency range from 300 GHz to 3 THz. This development in phase noise reduction establishes a new benchmark in the spectral purity of tunable THz sources. Such advances are pivotal for applications to move beyond oscillator constraints. △ Less

Submitted 29 November, 2023; v1 submitted 16 November, 2023; originally announced November 2023.

60 Gbps real-time wireless communications at 300 GHz carrier using a Kerr microcomb

Authors: Brendan M. Heffernan, Yuma Kawamoto, Keisuke Maekawa, James Greenberg, Rubab Amin, Takashi Hori, Tatsuya Tanigawa, Tadao Nagatsuma, Antoine Rolland

Abstract: Future wireless communication infrastructure will rely on terahertz systems that can support an increasing demand for large-bandwidth, ultra-fast wireless data transfer. In order to satisfy this demand, compact, low-power, and low noise sources of terahertz radiation are being developed. A promising route to achieving this goal is combining photonic-integrated optical frequency combs with fast pho… ▽ More Future wireless communication infrastructure will rely on terahertz systems that can support an increasing demand for large-bandwidth, ultra-fast wireless data transfer. In order to satisfy this demand, compact, low-power, and low noise sources of terahertz radiation are being developed. A promising route to achieving this goal is combining photonic-integrated optical frequency combs with fast photodiodes for difference frequency generation in the THz. Here, we demonstrate wireless communications using a 300 GHz carrier wave generated via photomixing of two optical tones originating from diode lasers that are injection locked to a dissipative Kerr soliton frequency microcomb. We achieve transfer rates of 80 Gbps using homodyne detection and 60 Gbps transmitting simultaneously both data and clock signals in a dual-path wireless link. This experimental demonstration paves a path towards low-noise and integrated photonic millimeter-wave transceivers for future wireless communication systems. △ Less

Submitted 16 February, 2023; originally announced April 2023.

300 GHz wireless link based on an integrated Kerr soliton comb

Authors: Tomohiro Tetsumoto, Antoine Rolland

Abstract: A Kerr microresonator frequency comb has enabled the generation of low-phase-noise millimeter- and terahertz-waves in conjunction with an ultrafast photodiode. It is intriguing to employ the new light source in wireless communication at above 100 GHz band, where a carrier signal with a high signal-to-noise ratio is desired to achieve higher data rates. In this study, we demonstrate two simple and… ▽ More A Kerr microresonator frequency comb has enabled the generation of low-phase-noise millimeter- and terahertz-waves in conjunction with an ultrafast photodiode. It is intriguing to employ the new light source in wireless communication at above 100 GHz band, where a carrier signal with a high signal-to-noise ratio is desired to achieve higher data rates. In this study, we demonstrate two simple and efficient architectures of wireless links based on a microresonator comb. We show experimentally that simultaneous modulation and detection of multiple comb lines result in >10 times stronger modulation signal strength than two-line detection at a receiver. Successful transmission of complex modulation format up to 64 quadrature amplitude modulation proves that a microresonator comb and the proposed modulation method are effective in modern wireless communication. △ Less

Submitted 28 October, 2022; originally announced October 2022.

Comments: 14 pages, 8 figures

Dissipative Kerr soliton photonic terahertz oscillator referenced to a molecule

Authors: James Greenberg, Brendan M. Heffernan, Tomohiro Tetsumoto, Antoine Rolland

Abstract: Controlling the coherence between light and matter has enabled the radiation of electromagnetic waves with spectral purity and stability that defines the Système International (SI) second. While transitions between hyperfine levels in atoms are accessible in the microwave and optical domains, faithfully transferring such stability to other frequency ranges of interest is not trivial. Such stabilit… ▽ More Controlling the coherence between light and matter has enabled the radiation of electromagnetic waves with spectral purity and stability that defines the Système International (SI) second. While transitions between hyperfine levels in atoms are accessible in the microwave and optical domains, faithfully transferring such stability to other frequency ranges of interest is not trivial. Such stability is specifically sought after for the terahertz domain to improve the resolution in very long baseline interferometry and molecular spectroscopy, and advance the technological development of high-speed, high data rate wireless communications. However, there is an evident lack of native frequency references in this spectral range, essential for the consistency of measurements and traceability. To mitigate the frequency drift encompassed in such waves, we experimentally demonstrate that using rotational spectroscopy of nitrous oxide N2O can lead to linewidth reduction up to a thousandfold. A pair of diode lasers, optically injected with a low-noise, chip-based dissipative Kerr soliton, were incident upon a uni-travelling-carrier photodiode. We frequency-locked the emitted terahertz wave to the center of a rotational transition of N2O through phase modulation spectroscopy. A terahertz wave with a 6 Hz linewidth was achieved (fractional frequency stability of $2 \times 10^{-11}$ at 1 second averaging time) while circumventing the need of frequency multiplication or division of frequency standards. △ Less

Submitted 19 October, 2022; originally announced October 2022.

Comments: arXiv admin note: text overlap with arXiv:2205.06380

Regularized Contrastive Learning of Semantic Search

Authors: Mingxi Tan, Alexis Rolland, Andong Tian

Abstract: Semantic search is an important task which objective is to find the relevant index from a database for query. It requires a retrieval model that can properly learn the semantics of sentences. Transformer-based models are widely used as retrieval models due to their excellent ability to learn semantic representations. in the meantime, many regularization methods suitable for them have also been pro… ▽ More Semantic search is an important task which objective is to find the relevant index from a database for query. It requires a retrieval model that can properly learn the semantics of sentences. Transformer-based models are widely used as retrieval models due to their excellent ability to learn semantic representations. in the meantime, many regularization methods suitable for them have also been proposed. In this paper, we propose a new regularization method: Regularized Contrastive Learning, which can help transformer-based models to learn a better representation of sentences. It firstly augments several different semantic representations for every sentence, then take them into the contrastive objective as regulators. These contrastive regulators can overcome overfitting issues and alleviate the anisotropic problem. We firstly evaluate our approach on 7 semantic search benchmarks with the outperforming pre-trained model SRoBERTA. The results show that our method is more effective for learning a superior sentence representation. Then we evaluate our approach on 2 challenging FAQ datasets, Cough and Faqir, which have long query and index. The results of our experiments demonstrate that our method outperforms baseline methods. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Comments: 13 pages, 3 figures, paper accepted by NLPCC 2022

Exceeding octave tunable Terahertz waves with zepto-second level timing noise

Authors: Rubab Amin, James Greenberg, Brendan Heffernan, Tadao Nagatsuma, Antoine Rolland

Abstract: Spectral purity of any millimeter wave (mmW) source is of the utmost interest in low-noise applications. Optical synthesis via photomixing is an attractive source for such mmWs, which usually involves expensive spectrally pure lasers with narrow linewidths approaching monochromaticity due to their inherent fabrication costs or specifications. Here, we report an alternative option for enhancing the… ▽ More Spectral purity of any millimeter wave (mmW) source is of the utmost interest in low-noise applications. Optical synthesis via photomixing is an attractive source for such mmWs, which usually involves expensive spectrally pure lasers with narrow linewidths approaching monochromaticity due to their inherent fabrication costs or specifications. Here, we report an alternative option for enhancing the spectral purity of inexpensive semiconductor diode lasers via a self-injection locking technique through corresponding Stokes waves from a fiber Brillouin cavity exhibiting greatly improved phase noise levels and large wavelength tunability of ~1.8 nm. We implement a system with two self-injected diode lasers on a common Brillouin cavity aimed at difference frequency generation in the mmW and THz region. We generate tunable sub-mmW (0.3 and 0.5 THz) waves by beating the self-injected two wavelength Stokes light on a uni-travelling carrier photodiode and characterize the noise performance. The sub-mmW features miniscule timing noise levels in the zepto-second (zs.Hz^-0.5) scale outperforming the state of the art dissipative Kerr soliton based micro-resonator setups while offering broader frequency tunability. These results suggest a viable inexpensive alternative for mmW sources aimed at low-noise applications featuring lab-scale footprints and rack-mounted portability while paving the way for chip-scale photonic integration. △ Less

Submitted 15 July, 2022; originally announced July 2022.

Comments: 31 pages

Photonic Generation of Millimeter-Waves Disciplined by Molecular Rotational Spectroscopy

Authors: James Greenberg, Rubab Amin, Brendan M. Heffernan, Antoine Rolland

Abstract: Optical generation of millimeter-waves (mm-wave) is made possible by an optical heterodyne of two diode lasers on a uni-traveling-carrier photodiode (UTC-PD). We utilized this technique to produce a mm-wave oscillator with desirable phase-noise characteristics, which were inherited from a pair of narrow-linewidth diode lasers. We present the long-term stabilization of our oscillator, achieved by r… ▽ More Optical generation of millimeter-waves (mm-wave) is made possible by an optical heterodyne of two diode lasers on a uni-traveling-carrier photodiode (UTC-PD). We utilized this technique to produce a mm-wave oscillator with desirable phase-noise characteristics, which were inherited from a pair of narrow-linewidth diode lasers. We present the long-term stabilization of our oscillator, achieved by referencing it to a rotational transition of gaseous nitrous oxide (N2O). Direct frequency modulation spectroscopy at 301.442 GHz (J=11) generated an error signal that disciplined the frequency difference between the diode lasers and thus, locked the millimeter-wave radiation to the molecular rotational line. The mm-wave frequency was down-converted using an electro-optic (EO) comb, and recorded by a frequency counter referenced to a Rubidium (Rb) clock. This resulted in short-term fractional frequency stability of $1.5 \times 10^{-11}/\sqrtτ$ and a long term-stability of $4\times 10^{-12}$ at 10,000 s averaging time. △ Less

Submitted 12 May, 2022; originally announced May 2022.

A Note on Data Simulations for Voting by Evaluation

Authors: Antoine Rolland, Jean-Baptiste Aubin, Irène Gannaz, Samuela Leoni

Abstract: Voting rules based on evaluation inputs rather than preference orders have been recently proposed, like majority judgement, range voting or approval voting. Traditionally, probabilistic analysis of voting rules supposes the use of simulation models to generate preferences data, like the Impartial Culture (IC) or Impartial and Anonymous Culture (IAC) models. But these simulation models are not suit… ▽ More Voting rules based on evaluation inputs rather than preference orders have been recently proposed, like majority judgement, range voting or approval voting. Traditionally, probabilistic analysis of voting rules supposes the use of simulation models to generate preferences data, like the Impartial Culture (IC) or Impartial and Anonymous Culture (IAC) models. But these simulation models are not suitable for the analysis of evaluation-based voting rules as they generate preference orders instead of the needed evaluations. We propose in this paper several simulation models for generating evaluation-based voting inputs. These models, inspired by classical ones, are defined, tested and compared for recommendation purpose. △ Less

Submitted 15 April, 2021; originally announced April 2021.

Deepest Voting: a new way of electing

Authors: Jean-Baptiste Aubin, Irène Gannaz, Samuela Leoni-Aubin, Antoine Rolland

Abstract: This article aims to present a unified framework for grading-based voting processes. The idea is to represent the grades of each voter on d candidates as a point in R^d and to define the winner of the vote using the deepest point of the scatter plot. The deepest point is obtained by the maximization of a depth function. Universality, unanimity, and neutrality properties are proved to be satisfied.… ▽ More This article aims to present a unified framework for grading-based voting processes. The idea is to represent the grades of each voter on d candidates as a point in R^d and to define the winner of the vote using the deepest point of the scatter plot. The deepest point is obtained by the maximization of a depth function. Universality, unanimity, and neutrality properties are proved to be satisfied. Monotonicity and Independence to Irrelevant Alternatives are also studied. It is shown that usual voting processes correspond to specific choices of depth functions. Finally, some basic paradoxes are explored for these voting processes. △ Less

Submitted 20 December, 2021; v1 submitted 9 April, 2021; originally announced April 2021.

Effects of a quiet point on a Kerr microresonator frequency comb

Authors: Tomohiro Tetsumoto, Jie Jiang, Martin E. Fermann, Gabriele Navickaite, Michael Geiselmann, Antoine Rolland

Abstract: A quiet point, an operating point of pump-resonance detuning that minimizes frequency fluctuation due to nonlinear effects inside a resonator, has been employed for phase noise reduction of a soliton Kerr microresonator frequency comb (microcomb). Naturally, it is expected that the use of the point will also improve performances of a microcomb in terms of frequency stability and faithfulness in a… ▽ More A quiet point, an operating point of pump-resonance detuning that minimizes frequency fluctuation due to nonlinear effects inside a resonator, has been employed for phase noise reduction of a soliton Kerr microresonator frequency comb (microcomb). Naturally, it is expected that the use of the point will also improve performances of a microcomb in terms of frequency stability and faithfulness in a phase locked loop. In this study, we experimentally investigate the effect in a microcomb with a repetition frequency of 300~GHz. We obtain a lowest fractional frequency instability at a quiet point of $1.5\times 10^{-9}$ at 1 second, which is 44 times lower than free-running instability. Phase-locking of a microcomb to a stabilized fiber comb is demonstrated to evaluate performance in a feedback loop, where in-loop-limited relative fractional frequency instability between the microcomb and the fiber comb of $6.8 \times 10^{-13}$ is obtained as an indicator of the stability limitation. △ Less

Submitted 15 February, 2021; originally announced February 2021.

Comments: 10 pages, 5 figures

Journal ref: OSA Continuum 4, 1348-1357 (2021)

300 GHz wave with attosecond-level timing noise

Authors: Tomohiro Tetsumoto, Tadao Nagatsuma, Martin E. Fermann, Gabriele Navickaite, Michael Geiselmann, Antoine Rolland

Abstract: Optical frequency division (OFD) via optical frequency combs (OFC) has enabled a leap in microwave metrology leading to noise performance never explored before. Extending the method to millimeter-wave (mmW) and terahertz (THz)-wave domain is of great interest. Dissipative Kerr solitons (DKSs) in integrated photonic chips offer a unique feature of delivering OFCs with ultrahigh repetition rates fro… ▽ More Optical frequency division (OFD) via optical frequency combs (OFC) has enabled a leap in microwave metrology leading to noise performance never explored before. Extending the method to millimeter-wave (mmW) and terahertz (THz)-wave domain is of great interest. Dissipative Kerr solitons (DKSs) in integrated photonic chips offer a unique feature of delivering OFCs with ultrahigh repetition rates from 10 GHz to 1 THz making them relevant gears to perform OFD in the mmW and THz-wave domain. We experimentally demonstrate OFD of an optically-carried 3.6 THz reference down to 300 GHz through a DKS, photodetected with an ultrafast uni-traveling-carrier photodiode (UTC-PD). A new measurement system, based on the characterization of a microwave reference phase-locked to the 300 GHz signal under test, yields attosecond-level timing noise sensitivity, leveraging conventional technical limitations. This work places DKSs as a leading technology in the mmW and THz-wave field promising breakthroughs in fundamental and civilian applications. △ Less

Submitted 22 September, 2020; originally announced September 2020.

Comments: 23 pages, 9 figures

ZooBuilder: 2D and 3D Pose Estimation for Quadrupeds Using Synthetic Data

Authors: Abassin Sourou Fangbemi, Yi Fei Lu, Mao Yuan Xu, Xiao Wu Luo, Alexis Rolland, Chedy Raissi

Abstract: This work introduces a novel strategy for generating synthetic training data for 2D and 3D pose estimation of animals using keyframe animations. With the objective to automate the process of creating animations for wildlife, we train several 2D and 3D pose estimation models with synthetic data, and put in place an end-to-end pipeline called ZooBuilder. The pipeline takes as input a video of an ani… ▽ More This work introduces a novel strategy for generating synthetic training data for 2D and 3D pose estimation of animals using keyframe animations. With the objective to automate the process of creating animations for wildlife, we train several 2D and 3D pose estimation models with synthetic data, and put in place an end-to-end pipeline called ZooBuilder. The pipeline takes as input a video of an animal in the wild, and generates the corresponding 2D and 3D coordinates for each joint of the animal's skeleton. With this approach, we produce motion capture data that can be used to create animations for wildlife. △ Less

Submitted 1 September, 2020; originally announced September 2020.

300 GHz generation based on a Kerr microresonator frequency comb stabilized to a low noise microwave reference

Authors: Tomohiro Tetsumoto, Fumiya Ayano, Mark Yeo, Julian Webber, Tadao Nagatsuma, Antoine Rolland

Abstract: In this letter, we experimentally demonstrate low noise 300GHz wave generation based on a Kerr microresonator frequency comb operating in soliton regime. The spectral purity of a 10GHz GPS-disciplined dielectric resonant oscillator is transferred to the 300GHz repetition rate frequency of the soliton comb through an optoelectronic phase-locked loop. Two adjacent comb lines beat on a uni-travelling… ▽ More In this letter, we experimentally demonstrate low noise 300GHz wave generation based on a Kerr microresonator frequency comb operating in soliton regime. The spectral purity of a 10GHz GPS-disciplined dielectric resonant oscillator is transferred to the 300GHz repetition rate frequency of the soliton comb through an optoelectronic phase-locked loop. Two adjacent comb lines beat on a uni-travelling carrier photodiode emitting the 300GHz millimeter-wave signal into a waveguide. In an out-of-loop measurement we have measured the 300GHz power spectral density of phase noise to be -88dBc/Hz, -105dBc/Hz at 10kHz, 1MHz Fourier frequency, respectively. The free-running fractional frequency instability at 300GHz is $1 \times 10^{-9}$ at 1 second averaging time. Stabilized to a GPS signal, we report an in-loop residual instability of $2 \times 10^{-15}$ at 1 second which averages down to < $1 \times 10^{-17}$ at 1000 seconds. Such system provides a promising path to the realization of compact, low power consumption millimeter-wave oscillators with low noise performance for out-of-the-lab applications. △ Less

Submitted 16 June, 2020; originally announced June 2020.

Comments: 4 pages, 4 figures

Journal ref: Optics Letters Vol. 45, Issue 16, pp. 4377-4380 (2020)

Direct comparisons of European primary and secondary frequency standards via satellite techniques

Authors: F. Riedel, A. Al-Masoudi, E. Benkler, S. Dörscher, V. Gerginov, C. Grebing, S. Häfner, N. Huntemann, B. Lipphardt, C. Lisdat, E. Peik, D. Piester, C. Sanner, C. Tamm, S. Weyers, H. Denker, L. Timmen, C. Voigt, D. Calonico, G. Cerretto, G. A. Costanzo, F. Levi, I. Sesia, J. Achkar, J. Guèna , et al. (24 additional authors not shown)

Abstract: We carried out a 26-day comparison of five simultaneously operated optical clocks and six atomic fountain clocks located at INRIM, LNE-SYRTE, NPL and PTB by using two satellite-based frequency comparison techniques: broadband Two-Way Satellite Time and Frequency Transfer (TWSTFT) and Global Positioning System Precise Point Positioning (GPS PPP). With an enhanced statistical analysis procedure taki… ▽ More We carried out a 26-day comparison of five simultaneously operated optical clocks and six atomic fountain clocks located at INRIM, LNE-SYRTE, NPL and PTB by using two satellite-based frequency comparison techniques: broadband Two-Way Satellite Time and Frequency Transfer (TWSTFT) and Global Positioning System Precise Point Positioning (GPS PPP). With an enhanced statistical analysis procedure taking into account correlations and gaps in the measurement data, combined overall uncertainties in the range of $1.8 \times 10^{-16}$ to $3.5 \times 10^{-16}$ for the optical clock comparisons were found. The comparison of the fountain clocks yields results with a maximum relative frequency difference of $6.9 \times 10^{-16}$, and combined overall uncertainties in the range of $4.8 \times 10^{-16}$ to $7.7 \times 10^{-16}$. △ Less

Submitted 9 October, 2019; originally announced October 2019.

Guidelines for develo** optical clocks with $10^{-18}$ fractional frequency uncertainty

Authors: Moustafa Abdel-Hafiz, Piotr Ablewski, Ali Al-Masoudi, Héctor Álvarez Martínez, Petr Balling, Geoffrey Barwood, Erik Benkler, Marcin Bober, Mateusz Borkowski, William Bowden, Roman Ciuryło, Hubert Cybulski, Alexandre Didier, Miroslav Doležal, Sören Dörscher, Stephan Falke, Rachel M. Godun, Ramiz Hamid, Ian R. Hill, Richard Hobson, Nils Huntemann, Yann Le Coq, Rodolphe Le Targat, Thomas Legero, Thomas Lindvall , et al. (20 additional authors not shown)

Abstract: There has been tremendous progress in the performance of optical frequency standards since the first proposals to carry out precision spectroscopy on trapped, single ions in the 1970s. The estimated fractional frequency uncertainty of today's leading optical standards is currently in the $10^{-18}$ range, approximately two orders of magnitude better than that of the best caesium primary frequency… ▽ More There has been tremendous progress in the performance of optical frequency standards since the first proposals to carry out precision spectroscopy on trapped, single ions in the 1970s. The estimated fractional frequency uncertainty of today's leading optical standards is currently in the $10^{-18}$ range, approximately two orders of magnitude better than that of the best caesium primary frequency standards. This exceptional accuracy and stability is resulting in a growing number of research groups develo** optical clocks. While good review papers covering the topic already exist, more practical guidelines are needed as a complement. The purpose of this document is therefore to provide technical guidance for researchers starting in the field of optical clocks. The target audience includes national metrology institutes (NMIs) wanting to set up optical clocks (or subsystems thereof) and PhD students and postdocs entering the field. Another potential audience is academic groups with experience in atomic physics and atom or ion trap**, but with less experience of time and frequency metrology and optical clock requirements. These guidelines have arisen from the scope of the EMPIR project "Optical clocks with $1 \times 10^{-18}$ uncertainty" (OC18). Therefore, the examples are from European laboratories even though similar work is carried out all over the world. The goal of OC18 was to push the development of optical clocks by improving each of the necessary subsystems: ultrastable lasers, neutral-atom and single-ion traps, and interrogation techniques. This document shares the knowledge acquired by the OC18 project consortium and gives practical guidance on each of these aspects. △ Less

Submitted 13 August, 2019; v1 submitted 27 June, 2019; originally announced June 2019.

Comments: 130 pages, Table 5.3 corrected in v2

Stylolites: A review

Authors: Renaud Toussaint, E. Aharonov, D. Koehn, P. Gratier, M. Ebner, P. Baud, A. Rolland, F. Renard

Abstract: Stylolites are ubiquitous geo-patterns observed in rocks in the upper crust, from geological reservoirs in sedimentary rocks to deformation zones, in folds, faults, and shear zones. These rough surfaces play a major role in the dissolution of rocks around stressed contacts, the transport of dissolved material and the precipitation in surrounding pores. Consequently, they play an active role in the… ▽ More Stylolites are ubiquitous geo-patterns observed in rocks in the upper crust, from geological reservoirs in sedimentary rocks to deformation zones, in folds, faults, and shear zones. These rough surfaces play a major role in the dissolution of rocks around stressed contacts, the transport of dissolved material and the precipitation in surrounding pores. Consequently, they play an active role in the evolution of rock microstructures and rheological properties in the Earth's crust. They are observed individually or in networks, in proximity to fractures and joints, and in numerous geological settings. This review article deals with their geometrical and compositional characteristics and the factors leading to their genesis. The main questions this review focuses on are the following: How do they form? How can they be used to measure strain and formation stress? How do they control fluid flow in the upper crust? Geometrically, stylolites have fractal roughness, with fractal geometrical properties exhibiting typically three scaling regimes: a self-affine scaling with Hurst exponent 1.1+/-0.1 at small scale (up to tens or hundreds of microns), another one with Hurst exponent around 0.5 to 0.6 at intermediate scale (up to millimeters or centimeters), and in the case of sedimentary stylolites, a flat scaling at large scale. More complicated anisotropic scaling (scaling laws depending of the direction of the profile considered) is found in the case of tectonic stylolites. We report models based on first principles from physical chemistry and statistical physics, including a mechanical component for the free-energy associated with stress concentrations, and a precise tracking of the influence of grain-scale heterogeneities and disorder on the resulting (micro)structures. Experimental efforts to reproduce stylolites in the laboratory are also reviewed. We show that although micrometer-size stylolite teeth are obtained in laboratory experiments, teeth deforming numerous grains have not yet been obtained experimentally, which is understandable given the very long formation time of such geometries. Finally, the applications of stylolites as strain and stress markers, to determine paleostress magnitude are reviewed. We show that the scalings in stylolite heights and the crossover scale between these scalings can be used to determine the stress magnitude (its scalar value) perpendicular to the stylolite surface during the stylolite formation, and that the stress anisotropy in the stylolite plane can be determined for the case of tectonic stylolites. We also show that the crossover between medium (millimetric) scales and large (pluricentimetric) scales, in the case of sedimentary stylolites, provides a good marker for the total amount of dissolution, which is still valid even when the largest teeth start to dissolve -- which leads to the loss of information, since the total deformation is not anymore recorded in a single marker structure. We discuss the impact of the stylolites on the evolution of the transport properties of the hosting rock, and show that they promote a permeability increase parallel to the stylolites, whereas their effect on the permeability transverse to the stylolite can be negligible, or may reduce the permeability, depending on the development of the stylolite. Highlights: Stylolite formation depends on rock composition and structure, stress and fluids. Stylolite geometry, fractal and self-affine properties, network structure, are investigated. The experiments and physics-based numerical models for their formation are reviewed. Stylolites can be used as markers of strain, paleostress orientation and magnitude. Stylolites impact transport properties, as function of maturity and flow direction. △ Less

Submitted 30 October, 2018; originally announced October 2018.

Journal ref: Journal of Structural Geology, Elsevier, 2018, 114, pp.163 - 195

Absolute frequency measurement of the $^2$S$_{1/2} \rightarrow ^2$F$_{7/2}$ optical clock transition in $^{171}$Yb$^+$ with an uncertainty of $4\times 10^{-16}$ using a frequency link to International Atomic Time

Authors: Charles F. A. Baynham, Rachel M. Godun, Jonathan M. Jones, Steven A. King, Peter B. R. Nisbet-Jones, Fred Baynes, Antoine Rolland, Patrick E. G. Baird, Kai Bongs, Patrick Gill, Helen S. Margolis

Abstract: The highly forbidden $^2$S$_{1/2} \rightarrow ^2$F$_{7/2}$ electric octupole transition in $^{171}$Yb$^+$ is a potential candidate for a redefinition of the SI second. We present a measurement of the absolute frequency of this optical transition, performed using a frequency link to International Atomic Time to provide traceability to the SI second. The $^{171}$Yb$^+$ optical frequency standard was… ▽ More The highly forbidden $^2$S$_{1/2} \rightarrow ^2$F$_{7/2}$ electric octupole transition in $^{171}$Yb$^+$ is a potential candidate for a redefinition of the SI second. We present a measurement of the absolute frequency of this optical transition, performed using a frequency link to International Atomic Time to provide traceability to the SI second. The $^{171}$Yb$^+$ optical frequency standard was operated for 76% of a 25-day period, with the absolute frequency measured to be 642 121 496 772 645.14(26) Hz. The fractional uncertainty of $4.0 \times 10 ^{-16}$ is comparable to that of the best previously reported measurement, which was made by a direct comparison to local caesium primary frequency standards. △ Less

Submitted 27 October, 2017; v1 submitted 3 July, 2017; originally announced July 2017.

Comments: 10 pages, 3 figures. Corrected typos - no changes to any numbers or results from version1

Geodesy and metrology with a transportable optical clock

Authors: Jacopo Grotti, Silvio Koller, Stefan Vogt, Sebastian Häfner, Uwe Sterr, Christian Lisdat, Heiner Denker, Christian Voigt, Ludger Timmen, Antoine Rolland, Fred N. Baynes, Helen S. Margolis, Michel Zampaolo, Pierre Thoumany, Marco Pizzocaro, Benjamin Rauf, Filippo Bregolin, Anna Tampellini, Piero Barbieri, Massimo Zucco, Giovanni A. Costanzo, Cecilia Clivati, Filippo Levi, Davide Calonico

Abstract: The advent of novel measurement instrumentation can lead to paradigm shifts in scientific research. Optical atomic clocks, due to their unprecedented stability and uncertainty, are already being used to test physical theories and herald a revision of the International System of units (SI). However, to unlock their potential for cross-disciplinary applications such as relativistic geodesy, a major… ▽ More The advent of novel measurement instrumentation can lead to paradigm shifts in scientific research. Optical atomic clocks, due to their unprecedented stability and uncertainty, are already being used to test physical theories and herald a revision of the International System of units (SI). However, to unlock their potential for cross-disciplinary applications such as relativistic geodesy, a major challenge remains. This is their transformation from highly specialized instruments restricted to national metrology laboratories into flexible devices deployable in different locations. Here we report the first field measurement campaign performed with a ubiquitously applicable $^{87}$Sr optical lattice clock. We use it to determine the gravity potential difference between the middle of a mountain and a location 90 km apart, exploiting both local and remote clock comparisons to eliminate potential clock errors. A local comparison with a $^{171}$Yb lattice clock also serves as an important check on the international consistency of independently developed optical clocks. This campaign demonstrates the exciting prospects for transportable optical clocks. △ Less

Submitted 11 May, 2017; originally announced May 2017.

Test of special relativity using a fiber network of optical clocks

Authors: P. Delva, J. Lodewyck, S. Bilicki, E. Bookjans, G. Vallet, R. Le Targat, P. -E. Pottie, C. Guerlin, F. Meynadier, C. Le Poncin-Lafitte, O. Lopez, A. Amy-Klein, W. -K. Lee, N. Quintin, C. Lisdat, A. Al-Masoudi, S. Dörscher, C. Grebing, G. Grosche, A. Kuhl, S. Raupach, U. Sterr, I. R. Hill, R. Hobson, W. Bowden , et al. (6 additional authors not shown)

Abstract: Phase compensated optical fiber links enable high accuracy atomic clocks separated by thousands of kilometers to be compared with unprecedented statistical resolution. By searching for a daily variation of the frequency difference between four strontium optical lattice clocks in different locations throughout Europe connected by such links, we improve upon previous tests of time dilation predicted… ▽ More Phase compensated optical fiber links enable high accuracy atomic clocks separated by thousands of kilometers to be compared with unprecedented statistical resolution. By searching for a daily variation of the frequency difference between four strontium optical lattice clocks in different locations throughout Europe connected by such links, we improve upon previous tests of time dilation predicted by special relativity. We obtain a constraint on the Robertson--Mansouri--Sexl parameter $|α|\lesssim 1.1 \times10^{-8}$ quantifying a violation of time dilation, thus improving by a factor of around two the best known constraint obtained with Ives--Stilwell type experiments, and by two orders of magnitude the best constraint obtained by comparing atomic clocks. This work is the first of a new generation of tests of fundamental physics using optical clocks and fiber links. As clocks improve, and as fiber links are routinely operated, we expect that the tests initiated in this paper will improve by orders of magnitude in the near future. △ Less

Submitted 12 June, 2017; v1 submitted 13 March, 2017; originally announced March 2017.

Comments: 6 pages, 3 figures, published in Phys. Rev. L

Journal ref: Phys. Rev. Lett. 118, 221102 (2017)

Al4SiC4 vibrational properties: Density Functional Theory calculations compared to Raman and Infrared spectroscopy measurements

Authors: L. Pedesseau, O. Chaix-Pluchery, M. Modreanu, D. Chaussende, E. Sarigiannidou, A. Rolland, J. Even, O. Durand

Abstract: Al4SiC4 is a wide band gap semiconductor with numerous potential technological applications. We report here the first thorough experimental Raman and Infrared (IR) investigation of vibrational properties of Al4SiC4 single crystals grown by high temperature solution growth method. The experimental results are compared with the full theoretical analysis of vibrational properties based on Density Fun… ▽ More Al4SiC4 is a wide band gap semiconductor with numerous potential technological applications. We report here the first thorough experimental Raman and Infrared (IR) investigation of vibrational properties of Al4SiC4 single crystals grown by high temperature solution growth method. The experimental results are compared with the full theoretical analysis of vibrational properties based on Density Functional Theory calculations that are revisited here. We have obtained a good agreement between the experimental and calculated Raman phonon modes and this allowed the symmetry assignment of all the measured Raman modes. We have revisited the DFT calculation of the IR active phonon modes and our results for LO-TO splitting indicate a substantial decrease of the variation of omega(LO-TO) compared with the previous reported calculation. Moreover, most of the IR modes have been symmetry assigned from the comparison of the experimental IR spectra with the corresponding Raman spectra and the Al4SiC4 calculated phonon modes. △ Less

Submitted 16 December, 2016; originally announced December 2016.

Quasiperiodic patterns in $δ$ Scuti stars: an in-depth study of the CoRoT star HD 174966

Authors: A. García Hernández, A. Moya, J. C. Suárez, R. Garrido, L. Mantegazza, S. Martín-Ruiz, M. Rainer, E. Poretti, P. J. Amado, A. Rolland, P. Mathias, K. Uytterhoeven

Abstract: In this work, we have gone one step further from the study presented in the first CoRoT symposium. Our analysis consists on constructing a model database covering the entire uncertainty box of the $δ$ Sct star HD174966, derived from the usual observables ($\mathrm{T}_{\mathrm{eff}}$, $\log g$ and [Fe/H]), and constraining the models representative of the star. To do that, we use the value of the p… ▽ More In this work, we have gone one step further from the study presented in the first CoRoT symposium. Our analysis consists on constructing a model database covering the entire uncertainty box of the $δ$ Sct star HD174966, derived from the usual observables ($\mathrm{T}_{\mathrm{eff}}$, $\log g$ and [Fe/H]), and constraining the models representative of the star. To do that, we use the value of the periodicity (related to $Δν_{\ell}$) found in its CoRoT pulsating spectrum. △ Less

Submitted 27 January, 2016; originally announced January 2016.

Comments: Transiting planets, vibrating stars & their connection. Proceedings of the 2nd CoRoT symposium (14 - 17 June 2011, Marseille). Edited by A. Baglin, M. Deleuil, E. Michel & C. Moutou

Computational design of high performance hybrid perovskite on silicon tandem solar cells

Authors: A. Rolland, L. Pedesseau, A. Beck, M. Kepenekian, C. Katan, Y. Huang, S. Wang, C. Cornet, O. Durand, J. Even

Abstract: In this study, the optoelectronic properties of a monolithically integrated series-connected tandem solar cell are simulated. Following the large success of hybrid organic-inorganic perovskites, which have recently demonstrated large efficiencies with low production costs, we examine the possibility of using the same perovskites as absorbers in a tandem solar cell. The cell consists in a methylamm… ▽ More In this study, the optoelectronic properties of a monolithically integrated series-connected tandem solar cell are simulated. Following the large success of hybrid organic-inorganic perovskites, which have recently demonstrated large efficiencies with low production costs, we examine the possibility of using the same perovskites as absorbers in a tandem solar cell. The cell consists in a methylammonium mixed bromide-iodide lead perovskite, CH3NH3PbI3(1-x)Br3x (0 < x < 1), top sub-cell and a single-crystalline silicon bottom sub-cell. A Si-based tunnel junction connects the two sub-cells. Numerical simulations are based on a one-dimensional numerical drift-diffusion model. It is shown that a top cell absorbing material with 20% of bromide and a thickness in the 300-400 nm range affords current matching with the silicon bottom cell. Good interconnection between single cells is ensured by standard n and p do** of the silicon at 5.10^19cm-3 in the tunnel junction. A maximum efficiency of 27% is predicted for the tandem cell, exceeding the efficiencies of stand-alone silicon (17.3%) and perovskite cells (17.9%) taken for our simulations, and more importantly, that of the record crystalline Si cells. △ Less

Submitted 4 September, 2015; originally announced September 2015.

Comments: 17 pages, 7 figures

Digital-photonic synthesis of ultra-low noise tunable signals from RF to 100 GHz

Authors: T. M. Fortier, A. Rolland, F. Quinlan, F. N. Baynes, A. J. Metcalf, A. Hati, A. Ludlow, N. Hinkley, M. Shimizu, T. Ishibashi, J. C. Campbell, S. A. Diddams

Abstract: The demand for higher data rates and better synchronization in communication and navigation systems necessitates the development of new wideband and tunable sources with noise performance exceeding that provided by traditional oscillators and synthesizers. Precision synthesis is paramount for providing frequency references and timing in a broad range of applications including next-generation telec… ▽ More The demand for higher data rates and better synchronization in communication and navigation systems necessitates the development of new wideband and tunable sources with noise performance exceeding that provided by traditional oscillators and synthesizers. Precision synthesis is paramount for providing frequency references and timing in a broad range of applications including next-generation telecommunications, high precision measurement, and radar and sensing. Here we describe a digital-photonic synthesizer (DPS) based on optical frequency division that enables the generation of widely tunable signals from near DC to 100 GHz with a fractional frequency instability of 1 part in 10^15. The spectral purity of the DPS derived signals represents an improvement in close-to-carrier noise performance over the current state-of-the-art of nearly 7 orders of magnitude in the W-band (100 GHz), and up to 5 orders of magnitude in the X-band (10 GHz). △ Less

Submitted 10 June, 2015; originally announced June 2015.

On the String Kernel Pre-Image Problem with Applications in Drug Discovery

Authors: Sébastien Giguère, Amélie Rolland, François Laviolette, Mario Marchand

Abstract: The pre-image problem has to be solved during inference by most structured output predictors. For string kernels, this problem corresponds to finding the string associated to a given input. An algorithm capable of solving or finding good approximations to this problem would have many applications in computational biology and other fields. This work uses a recent result on combinatorial optimizatio… ▽ More The pre-image problem has to be solved during inference by most structured output predictors. For string kernels, this problem corresponds to finding the string associated to a given input. An algorithm capable of solving or finding good approximations to this problem would have many applications in computational biology and other fields. This work uses a recent result on combinatorial optimization of linear predictors based on string kernels to develop, for the pre-image, a low complexity upper bound valid for many string kernels. This upper bound is used with success in a branch and bound searching algorithm. Applications and results in the discovery of druggable peptides are presented and discussed. △ Less

Submitted 3 December, 2014; v1 submitted 3 December, 2014; originally announced December 2014.

Comments: Peer-reviewed and accepted for presentation at Machine Learning in Computational Biology 2014, Montréal, Québec, Canada

ACM Class: I.2.6; K.3.2

Optoelectronic down-conversion by four-wave mixing in a highly nonlinear fiber for millimeter-wave and THz phase-locking

Authors: Antoine Rolland, Lucien Pouget, Marc Brunel, Mehdi Alouini

Abstract: Optoelectronic down-conversion of a THz optical beatnote to a RF intermediate frequency is performed with a standard Mach-Zehnder modulator followed by a zero dispersion-slope fiber. The two interleaved optical spectra obtained by four-wave mixing are shown to contain more than 75 harmonics enabling to conveniently recover the phase noise of a beatnote at 770 GHz at around 500 MHz. This four-wave… ▽ More Optoelectronic down-conversion of a THz optical beatnote to a RF intermediate frequency is performed with a standard Mach-Zehnder modulator followed by a zero dispersion-slope fiber. The two interleaved optical spectra obtained by four-wave mixing are shown to contain more than 75 harmonics enabling to conveniently recover the phase noise of a beatnote at 770 GHz at around 500 MHz. This four-wave mixing down-conversion technique is implemented in a two-frequency solid-state laser in order to directly phase-lock its 168 GHz beatnote to a 10 MHz local oscillator. △ Less

Submitted 3 March, 2014; originally announced March 2014.

Comments: 12 pages, 5 figures

Morphological analysis of stylolites for paleostress estimation in limestones surrounding the Andra Underground Research Laboratory site

Authors: Alexandra Rolland, Renaud Toussaint, Patrick Baud, Nathalie Conil, Philippe Landrein

Abstract: We develop and test a methodology to infer paleostress from the morphology of stylolites within borehole cores. This non-destructive method is based on the analysis of the stylolite trace along the outer cylindrical surface of the cores. It relies on an automatic digitization of high-resolution photographs and on the spatial Fourier spectrum analysis of the stylolite traces. We test and show, on b… ▽ More We develop and test a methodology to infer paleostress from the morphology of stylolites within borehole cores. This non-destructive method is based on the analysis of the stylolite trace along the outer cylindrical surface of the cores. It relies on an automatic digitization of high-resolution photographs and on the spatial Fourier spectrum analysis of the stylolite traces. We test and show, on both synthetic and natural examples, that the information from this outer cylindrical surface is equivalent to the one obtained from the destructive planar sections traditionally used. The assessment of paleostress from the stylolite morphology analysis is made using a recent theoretical model, which links the morphological properties to the physical processes acting during stylolite evolution. This model shows that two scaling regimes are to be expected for the stylolite height power spectrum, separated by a cross-over length that depends on the magnitude of the paleostress during formation. We develop a non linear fit method to automatically extract the cross-over lengths from the digitized stylolite profiles. Results on cores from boreholes drilled in the surroundings of the Andra Underground Research Laboratory located at Bure, France, show that different groups of sedimentary stylolites can be distinguished, and correspond to different estimated vertical paleostress values. For the Oxfordian formation, one group of stylolites indicate a paleostress of around 10 MPa, while another group yields 15 MPa. For the Dogger formation, two stylolites indicate a paleostress of around 10 MPa, while others appear to have stopped growing at paleostresses between 30 and 22 MPa, starting at an erosion phase that initiated in the late Cretaceous and continues today. This method has a high potential for further applications on reservoirs or other geological contexts where stylolites are present. △ Less

Submitted 17 October, 2013; originally announced October 2013.

Comments: International Journal of Rock Mechanics and Mining Sciences (2013) online first

An in-depth study of HD 174966 with CoRoT photometry and HARPS spectroscopy. Large separation as a new observable for δSct stars

Authors: A. García Hernández, A. Moya, E. Michel, J. C. Suárez, E. Poretti, S. Martín-Ruíz, P. J. Amado, R. Garrido, E. Rodríguez, M. Rainer, K. Uytterhoeven, C. Rodrigo, E. Solano, J. R. Rodón, P. Mathias, A. Rolland, M. Auvergne, A. Baglin, F. Baudin, C. Catala, R. Samadi

Abstract: The aim of this work was to use a multi-approach technique to derive the most accurate values possible of the physical parameters of the δSct star HD174966. In addition, we searched for a periodic pattern in the frequency spectra with the goal of using it to determine the mean density of the star. First, we extracted the frequency content from the CoRoT light curve. Then, we derived the physical p… ▽ More The aim of this work was to use a multi-approach technique to derive the most accurate values possible of the physical parameters of the δSct star HD174966. In addition, we searched for a periodic pattern in the frequency spectra with the goal of using it to determine the mean density of the star. First, we extracted the frequency content from the CoRoT light curve. Then, we derived the physical parameters of HD174966 and carried a mode identification out from the spectroscopic and photometric observations. We used this information to look for the models fulfilling all the conditions and discussed the inaccuracies of the method because of the rotation effects. In a final step, we searched for patterns in the frequency set using a Fourier transform, discussed its origin and studied the possibility of using the periodicity to obtain information about the physical parameters of the star. A total of 185 peaks were obtained from the Fourier analysis of the CoRoT light curve, being almost all reliable pulsating frequencies. From the spectroscopic observations, 18 oscillation modes were detected and identified, and the inclination angle ($62.5^{\circ}$$^{+7.5}_{-17.5}$) and the rotational velocity of the star (142 km/s) were estimated. From the multi-colour photometric observations, 3 frequencies were detected, which correspond to the main ones in the CoRoT light curve. We looked for periodicities within the 185 frequencies and found a periodic pattern ~64 μHz. Using the inclination angle, the rotational velocity and an Echelle diagram, showing a double comb outside the asymptotic regime, we concluded that the periodicity corresponds to a large separation structure. The periodic pattern allowed us to discriminate models from a grid, finding that the value of the mean density is achieved with a 6% uncertainty. So, the pattern could be used as a new observable for A-F type stars. △ Less

Submitted 10 July, 2013; originally announced July 2013.

Comments: 15 pages, 10 figures, 6 tables

Assessment of FDTD accuracy in the compact hemielliptic dielectric lens antenna analysis

Authors: A. V. Boriskin, A. Rolland, R. Sauleau, A. I. Nosich

Abstract: The objective of the paper is to assess the accuracy of a standard FDTD code in the analysis of the near and far-field characteristics of two-dimensional models of small-size dielectric lens antennas made of low or high-index materials and fed by the line sources. We consider extended hemielliptic lenses and use the Muller boundary integral equations method as a suitable reference solution. Inac… ▽ More The objective of the paper is to assess the accuracy of a standard FDTD code in the analysis of the near and far-field characteristics of two-dimensional models of small-size dielectric lens antennas made of low or high-index materials and fed by the line sources. We consider extended hemielliptic lenses and use the Muller boundary integral equations method as a suitable reference solution. Inaccuracies of FDTD near so-called half-bowtie resonances are detected. Denser meshing reduces the error of FDTD only to a certain level determined by the type of absorbing boundary conditions used and other fine details of the code. Out of these resonances, FDTD code is demonstrated as capable of providing sufficient accuracy in the near and far-field analysis of small-size hemielliptic lenses typical for the mm-wave applications. △ Less

Submitted 22 January, 2010; originally announced January 2010.

Comments: 7 pages, 7 figures

Journal ref: IEEE Trans. Antennas Propag., vol. 56, no. 3, pp. 758-764, 2008

Test of the FDTD accuracy in the analysis of the scattering resonances associated with high-Q whispering-gallery modes of a circular cylinder

Authors: A. V. Boriskin, S. V. Boriskina, A. Rolland, R. Sauleau, A. I. Nosich

Abstract: The objective of the paper is the assessment of the accuracy of a conventional FDTD code in the computation of the near and far-field scattering characteristics of a circular dielectric cylinder. We excite the cylinder with an electric or magnetic line current and demonstrate the failure of the two-dimensional FDTD algorithm to characterize accurately the emission rate and the field patterns nea… ▽ More The objective of the paper is the assessment of the accuracy of a conventional FDTD code in the computation of the near and far-field scattering characteristics of a circular dielectric cylinder. We excite the cylinder with an electric or magnetic line current and demonstrate the failure of the two-dimensional FDTD algorithm to characterize accurately the emission rate and the field patterns near high-Q whispering-gallery-mode resonances. This is proven by comparison with the exact series solutions. The computational errors in the emission rate are then studied at the resonances still detectable with FDTD, i.e. having Q-factors up to 10^3. △ Less

Submitted 22 January, 2010; originally announced January 2010.

Comments: 5 pages, 6 figures

Journal ref: J. Opt. Soc. Am. A, vol. 25, no. 5, pp. 1169-1173, 2008

Validation of FDTD-2D for high-Q resonances description

Authors: A. V. Boriskin, S. V. Boriskina, A. Rolland, R. Sauleau, A. I. Nosich

Abstract: The objective of the study is to assess the accuracy of a standard FDTD code in description of high-Q resonances such as whispering-gallery-mode (WGM) ones excited in circular dielectric resonators. To achieve the goal, we consider circular resonators excited by line currents and extract the data on FDTD accuracy from comparisons between the FDTD-solution and the exact one obtained by the Mie-se… ▽ More The objective of the study is to assess the accuracy of a standard FDTD code in description of high-Q resonances such as whispering-gallery-mode (WGM) ones excited in circular dielectric resonators. To achieve the goal, we consider circular resonators excited by line currents and extract the data on FDTD accuracy from comparisons between the FDTD-solution and the exact one obtained by the Mie-series solutions. The near-field and far-field characteristics are studied for resonators of various sizes, made of quartz and silicon. Both E - and H - polarizations are considered. The computational error, i.e. a resonance frequency shift observed for the FDTD solution, is analyzed and compared for several WGMs having different Q-factors. △ Less

Submitted 11 January, 2010; originally announced January 2010.

Comments: 3 pages (including poster)

Journal ref: Proc. Int. Workshop on Optical Waveguide Theory and Numerical Modelling (OWTNM-07), Copenhagen (Denmark), p. 18, April 2007

HD172189: another step in furnishing one of the best laboratories known for asteroseismic studies

Authors: O. L. Creevey, K. Uytterhoeven, S. Martín-Ruiz, P. J. Amado, E. Niemczura, H. VanWinckel, J. C. Suárez, A. Rolland, F. Rodler, C. Rodríguez-López, E. Rodríguez, G. Raskin, M. Rainer, E. Poretti, P. Pallé, R. Molina, A. Moya, P. Mathias, L. Le Guillou, P. Hadrava, D. Fabbian, R. Garrido, L. Decin, G. Cutispoto, V. Casanova , et al. (3 additional authors not shown)

Abstract: HD172189 is a spectroscopic eclipsing binary system with a rapidly-rotating pulsating delta Scuti component. It is also a member of the open cluster IC4756. These combined characteristics make it an excellent laboratory for asteroseismic studies. To date, HD172189 has been analysed in detail photometrically but not spectroscopically. For this reason we have compiled a set of spectroscopic data t… ▽ More HD172189 is a spectroscopic eclipsing binary system with a rapidly-rotating pulsating delta Scuti component. It is also a member of the open cluster IC4756. These combined characteristics make it an excellent laboratory for asteroseismic studies. To date, HD172189 has been analysed in detail photometrically but not spectroscopically. For this reason we have compiled a set of spectroscopic data to determine the absolute and atmospheric parameters of the components. We determined the radial velocities (RV) of both components using four different techniques. We disentangled the binary spectra using KOREL, and performed the first abundance analysis on both disentangled spectra. By combining the spectroscopic results and the photometric data, we obtained the component masses, 1.8 and 1.7 solar masses, and radii, 4.0 and 2.4 solar radii, for inclination i = 73.2 degrees, eccentricity e = 0.28, and orbital period 5.70198 days. Effective temperatures of 7600 K and 8100 K were also determined. The measured vsini are 78 and 74 km/s, respectively, giving rotational periods of 2.50 and 1.55 days for the components. The abundance analysis shows [Fe/H] = -0.28 for the primary (pulsating) star, consistent with observations of IC4756. We also present an assessment of the different analysis techniques used to obtain the RVs and the global parameters. △ Less

Submitted 18 September, 2009; originally announced September 2009.

Comments: accepted by AA

Asteroseismic analysis of the CoRoT δ-Scuti star HD174936

Authors: A. García Hernández, A. Moya, E. Michel, R. Garrido, J. C. Suárez, E. Rodríguez, P. J. Amado, S. Martín-Ruíz, A. Rolland, E. Poretti, R. Samadi, A. Baglin, M. Auvergne, C. Catala, L. Lefevre, F. Baudin

Abstract: We present an analysis of the δ-Scuti star object HD 174936 (ID 7613) observed by CoRoT during the first short run SRc01 (27 days). A total number of 422 frequencies we are extracted from the light curve using standard prewhitening techniques. This number of frequencies was obtained by considering a spectral significance limit of sig = 10 using the software package SigSpec. Our analysis of the o… ▽ More We present an analysis of the δ-Scuti star object HD 174936 (ID 7613) observed by CoRoT during the first short run SRc01 (27 days). A total number of 422 frequencies we are extracted from the light curve using standard prewhitening techniques. This number of frequencies was obtained by considering a spectral significance limit of sig = 10 using the software package SigSpec. Our analysis of the oscillation frequency spectrum reveals a spacing periodicity of around 52 \muHz. Although modes considered here are not in the asymptotic regime, a comparison with stellar models confirms that this signature may stem from a quasi-periodic pattern similar to the so-called large separation in solar-like stars. △ Less

Submitted 18 August, 2009; originally announced August 2009.

Comments: 7 pages, 7 figures, 2 tables. Accepted for publication in A&A CoRoT Special Feature

The gamma Dor CoRoT target HD49434. I-Results from the ground-based campaign

Authors: K. Uytterhoeven, P. Mathias, E. Poretti, M. Rainer, S. Martin-Ruiz, E. Rodriguez, P. J. Amado, D. LeContel, S. Jankov, E. Niemczura, K. Pollard, E. Brunsden, M. Paparo, V. Costa, J. -C. Valtier, R. Garrido, A. J. Marin, J. C. Suarez, P. H. Kilmartin, E. Chapellier, C. Rodriguez-Lopez, F. J. Aceituno, V. Casanova, A. Rolland, I. Olivares

Abstract: Context: We present the results of an extensive ground-based photometric and spectroscopic campaign on the gamma Dor CoRoT target HD49434. This campaign was preparatory to the CoRoT satellite observations, which took place from October 2007 to March 2008. Results: The frequency analysis clearly shows the presence of four frequencies in the 0.2-1.7 c/d interval, as well as six frequencies in the… ▽ More Context: We present the results of an extensive ground-based photometric and spectroscopic campaign on the gamma Dor CoRoT target HD49434. This campaign was preparatory to the CoRoT satellite observations, which took place from October 2007 to March 2008. Results: The frequency analysis clearly shows the presence of four frequencies in the 0.2-1.7 c/d interval, as well as six frequencies in the 5-12 c/d domain. The low frequencies are typical for gamma Dor variables while the high frequencies are common for delta Sct pulsators. We propose the frequency 2.666 c/d as a possible rotational frequency. All modes, for which an identification was possible, seem to be high-degree modes (3 <= l <= 8). We did not find evidence for a possible binary nature of HD49434. The element abundances we derived are consistent with the values obtained in previous analyses. Conclusions: We classify the gamma Dor star HD49434 as a hybrid pulsator, which pulsates simultaneously in p- and g-modes. This finding makes HD49434 an extremely interesting target for asteroseismic modelling. Observations: Based on observations made with the 2.2m ESO/MPI telescope at the La Silla Observatory under the ESO Large Programme: LP178.D-0361. Also based on observations obtained at Observatorio de Sierra Nevada (Spain), at the Centro Astronomico Hispano Aleman at Calar Alto (Spain), at Observatorio Astronomico Nacional San Pedro Martir (Mexico), at the Piszkesteto Mountain Station of Konkoly Observatory (Hungary), at Observatoire de Haute Provence (France) and at Mount John University Observatory (New Zealand). △ Less

Submitted 6 July, 2008; originally announced July 2008.

Comments: 15 pages, 10 figures, 9 tables accepted for publication in Astronomy and Astrophysics

Journal ref: Uytterhoeven et al., 2008, Astronomy and Astrophysics, 489, 1213-1224

Asteroseismology with the WIRE satellite. I. Combining Ground- and Space-based Photometry of the Delta Scuti Star Epsilon Cephei

Authors: H. Bruntt, J. C. Suarez, T. R. Bedding, D. L. Buzasi, A. Moya, P. J. Amado, S. Martin-Ruiz, R. Garrido, P. Lopez de Coca, A. Rolland, V. Costa, I. Olivares, J. M. Garcia-Pelayo

Abstract: We have analysed ground-based multi-colour Stromgren photometry and single-filter photometry from the star tracker on the WIRE satellite of the delta scuti star Epsilon Cephei. The ground-based data set consists of 16 nights of data collected over 164 days, while the satellite data are nearly continuous coverage of the star during 14 days. The spectral window and noise level of the satellite dat… ▽ More We have analysed ground-based multi-colour Stromgren photometry and single-filter photometry from the star tracker on the WIRE satellite of the delta scuti star Epsilon Cephei. The ground-based data set consists of 16 nights of data collected over 164 days, while the satellite data are nearly continuous coverage of the star during 14 days. The spectral window and noise level of the satellite data are superior to the ground-based data and this data set is used to locate the frequencies. However, we can use the ground-based data to improve the accuracy of the frequencies due to the much longer time baseline. We detect 26 oscillation frequencies in the WIRE data set, but only some of these can be seen clearly in the ground-based data. We have used the multi-colour ground-based photometry to determine amplitude and phase differences in the Stromgren b-y colour and the y filter in an attempt to identify the radial degree of the oscillation frequencies. We conclude that the accuracies of the amplitudes and phases are not sufficient to constrain theoretical models of Epsilon Cephei. We find no evidence for rotational splitting or the large separation among the frequencies detected in the WIRE data set. To be able to identify oscillation frequencies in delta scuti stars with the method we have applied, it is crucial to obtain more complete coverage from multi-site campaigns with a long time baseline and in multiple filters. This is important when planning photometric and spectroscopic ground-based support for future satellite missions like COROT and KEPLER. △ Less

Submitted 17 October, 2006; originally announced October 2006.

Comments: 13 pages, 12 figures, 4 tables. Fig. 4 reduced in quality. Accepted by A&A

A multisite photometric campaign on the Pre-Main-Sequence delta Scuti pulsator IP Per

Authors: V. Ripepi, S. Bernabei, M. Marconi, F. Palla, A. Arellano Ferro, A. Bonanno, P. Ferrara, A. Frasca, X. J. Jiang, S. -L. Kim, S. Marinoni, G. Mignemi, M. J. P. F. G. Monteiro, T. D. Oswalt, P. Reegen, R. Janulis, E. Rodriguez, A. Rolland, A. Ruoppo, L. Terranegra, K. Zwintz

Abstract: We present the results of a photometric multisite campaign on the $δ$ Scuti Pre-Main-Sequence star IP Per. Nine telescopes have been involved in the observations, with a total of about 190 hours of observations over 38 nights. Present data confirms the multiperiodic nature of this star and leads to the identification of at least nine pulsational frequencies. Comparison with the predictions of li… ▽ More We present the results of a photometric multisite campaign on the $δ$ Scuti Pre-Main-Sequence star IP Per. Nine telescopes have been involved in the observations, with a total of about 190 hours of observations over 38 nights. Present data confirms the multiperiodic nature of this star and leads to the identification of at least nine pulsational frequencies. Comparison with the predictions of linear non-adiabatic radial pulsation models allowed us to identify only five of the nine observed frequencies, and to constrain the position of IP Per in the HR diagram. The latter is in good agreement with the empirical determination of the stellar parameters obtained by Miroshnichenko et al. (2001). An initial interpretation of the observed frequencies using the Aarhus non-radial pulsation code suggests that three frequencies could be associated with non-radial ($l$=2) modes. Finally, we present new evolutionary and pulsation models at lower metallicity (Z=0.008) to take into account the possibility that IP Per is metal deficient, as indicated by Miroshnichenko et al. (2001). △ Less

Submitted 12 December, 2005; originally announced December 2005.

Comments: 10 pages 11 figures, accepted for publication on A&A

Detection of 75+ pulsation frequencies in the Delta Scuti star FG Vir

Authors: M. Breger, P. Lenz, V. Antoci, E. Guggenberger, R. R. Shobbrook, G. Handler, B. Ngwato, F. Rodler, E. Rodriguez, P. Lopez de Coca, A. Rolland, V. Costa

Abstract: Extensive photometric multisite campaigns of the Delta Scuti variable FG Vir are presented. For the years 2003 and 2004, 926 hours of photometry at the millimag precision level were obtained. The combinations with earlier campaigns lead to excellent frequency resolution and high signal/noise. A multifrequency analysis yields 79 frequencies. This represents a new record for this type of star. The… ▽ More Extensive photometric multisite campaigns of the Delta Scuti variable FG Vir are presented. For the years 2003 and 2004, 926 hours of photometry at the millimag precision level were obtained. The combinations with earlier campaigns lead to excellent frequency resolution and high signal/noise. A multifrequency analysis yields 79 frequencies. This represents a new record for this type of star. The modes discovered earlier were confirmed. Pulsation occurs over a wide frequency band from 5.7 to 44.3 c/d with amplitudes of 0.2 mmag or larger. Within this wide band the frequencies are not distributed at random, but tend to cluster in groups. A similar feature is seen in the power spectrum of the residuals after 79 frequencies are prewhitened. This indicates that many additional modes are excited. The interpretation is supported by a histogram of the photometric amplitudes, which shows an increase of modes with small amplitudes. The old question of the 'missing modes' may be answered now: the large number of detected frequencies as well as the large number of additional frequencies suggested by the power spectrum of the residuals con rms the theoretical prediction of a large number of excited modes. FG Vir shows a number of frequency combinations of the dominant mode at 12.7162 c/d (m = 0) with other modes of relatively high photometric amplitudes. The amplitudes of the frequency sums are higher than those of the differences. A second mode (20.2878 c/d) also shows combinations. This mode of azimuthal order m = -1 is coupled with two other modes of m = +1. △ Less

Submitted 3 February, 2005; originally announced February 2005.

Comments: 12 pages, 6 figures, 4 tables, accepted by Astronomy and Astrophysics

GAUDI: a preparatory archive for the COROT mission

Authors: E. Solano, C. Catala, R. Garrido, E. Poretti, E. Janot-Pacheco, R. Gutierrez, R. Gonzalez, L. Mantegazza, C. Neiner, Y. Fremat, S. Charpinet, W. Weiss, P. J. Amado, M. Rainer, V. Tsymbal, D. Lyashko, D. Ballereau, J. C. Bouret, T. Hua, D. Katz, F. Lignieres, T. Luftinger, P. Mittermayer, N. Nesvacil, C. Soubiran , et al. (12 additional authors not shown)

Abstract: The GAUDI database (Ground-based Asteroseismology Uniform Database Interface, http://sdc.laeff.esa.es/gaudi/) is a preparatory archive for the COROT (COnvection, ROtation and planetary Transits, http://www.astrsp-mrs.fr/projets/corot/) mission developed at LAEFF (Laboratory for Space Astrophysics and Theoretical Physics, http://www.laeff.esa.es). Its intention is to make the ground-based observa… ▽ More The GAUDI database (Ground-based Asteroseismology Uniform Database Interface, http://sdc.laeff.esa.es/gaudi/) is a preparatory archive for the COROT (COnvection, ROtation and planetary Transits, http://www.astrsp-mrs.fr/projets/corot/) mission developed at LAEFF (Laboratory for Space Astrophysics and Theoretical Physics, http://www.laeff.esa.es). Its intention is to make the ground-based observations obtained in the preparation of the asteroseismology programme available in a simple and efficient way. It contains spectroscopic and photometric data together with inferred physical parameters for more than 1500 objects gathered since January 1998 in 6 years of observational campaigns. In this paper, the main functionalities and characteristics of the system are described. The observations have been collected at ESO-La Silla, Telescopio Nazionale Galileo, Observatoire de Haute-Provence, South African Astronomical Observatory, Tautenberg Observatory and Sierra Nevada Observatory. △ Less

Submitted 30 September, 2004; originally announced September 2004.

Comments: 12 pages, 3 figures (quality degraded). Accepted for publication in The Astronomical Journal

The Delta Scuti star FG Vir. V. The 2002 photometric multisite campaign

Authors: M. Breger, F. Rodler, M. L. Pretorius, S. Martin-Ruiz, P. J. Amado, V. Costa, R. Garrido, P. Lopez de Coca, I. Olivares, E. Rodriguez, A. Rolland, T. Tshenye, G. Handler, E. Poretti, J. P. Sareyan, M. Alvarez, P. M. Kilmartin, W. Zima

Abstract: A high-accuracy multisite campaign was carried out from 2002 January to May with a photometric coverage of 398 hours at five observatories. The concentration on a few selected sites gives better consistency and accuracy than collecting smaller amounts from a larger number of sites. 23 frequencies were detected with a high statistical significance. 6 of these are new. The 17 frequencies found in… ▽ More A high-accuracy multisite campaign was carried out from 2002 January to May with a photometric coverage of 398 hours at five observatories. The concentration on a few selected sites gives better consistency and accuracy than collecting smaller amounts from a larger number of sites. 23 frequencies were detected with a high statistical significance. 6 of these are new. The 17 frequencies found in common with the 1992-1995 data are the modes with highest amplitudes. This indicates that the pulsation spectrum of FG Vir is relatively stable over the ten-year period. Two frequencies have variable amplitudes and phases from year to year as well as during 2002. These were both found to be double modes with close frequencies. For the mode at 12.15 c/d this leads to an apparent modulation with a time scale of about 129d. The close frequencies at 12.15 c/d are composed of a radial and a nonradial mode, suggesting a similarity with the Blazhko Effect seen in RR Lyrae stars. △ Less

Submitted 7 April, 2004; originally announced April 2004.

Comments: 8 pages, 4 figures, 2 tables

Journal ref: Astron.Astrophys. 419 (2004) 695-701

A photometric monitoring of bright high-amplitude delta Scuti stars. II. Period updates for seven stars

Authors: A. Derekas, L. L. Kiss, P. Szekely, E. J. Alfaro, B. Csak, Sz. Meszaros, E. Rodriguez, A. Rolland, K. Sarneczky, Gy. M. Szabo, K. Szatmary, M. Varadi, Cs. Kiss

Abstract: We present new photometric data for seven high-amplitude delta Scuti stars. The observations were acquired between 1996 and 2002, mostly in the Johnson photometric system. For one star (GW UMa), our observations are the first since the discovery of its pulsational nature from the Hipparcos data.The primary goal of this project was to update our knowledge on the period variations of the target st… ▽ More We present new photometric data for seven high-amplitude delta Scuti stars. The observations were acquired between 1996 and 2002, mostly in the Johnson photometric system. For one star (GW UMa), our observations are the first since the discovery of its pulsational nature from the Hipparcos data.The primary goal of this project was to update our knowledge on the period variations of the target stars. For this, we have collected all available photometric observations from the literature and constructed decades-long O-C diagrams of the stars. This traditional method is useful because of the single-periodic nature of the light variations. Text-book examples of slow period evolution (XX Cyg, DY Her, DY Peg) and cyclic period changes due to light-time effect (LITE) in a binary system (SZ Lyn) are updated with the new observations. For YZ Boo, we find a period decrease instead of increase. The previously suggested LITE-solution of BE Lyn (Kiss & Szatmary 1995) is not supported with the new O-C diagram. Instead of that, we suspect the presence of transient light curve shape variations mimicking small period changes. △ Less

Submitted 2 March, 2003; originally announced March 2003.

Comments: 11 pages, 15 figures, accepted for publication in A&A

Journal ref: Astron.Astrophys. 402 (2003) 733-744