Showing 1–17 of 17 results for author: Rol, M A

Towards European Standards for Quantum Technologies

Authors: O. van Deventer, N. Spethmann, M. Loeffler, M. Amoretti, R. van den Brink, N. Bruno, P. Comi, N. Farrugia, M. Gramegna, B. Kassenberg, W. Kozlowski, T. Länger, T. Lindstrom, V. Martin, N. Neumann, H. Papadopoulos, S. Pascazio, M. Peev, R. Pitwon, M. A. Rol, P. Traina, P. Venderbosch, F. K. Wilhelm-Mauch, A. Jenet

Abstract: The Second Quantum Revolution facilitates the engineering of new classes of sensors, communication technologies, and computers with unprecedented capabilities. Supply chains for quantum technologies are emerging, some focussed on commercially available components for enabling technologies and/or quantum-technologies research infrastructures, others with already higher technology-readiness levels,… ▽ More The Second Quantum Revolution facilitates the engineering of new classes of sensors, communication technologies, and computers with unprecedented capabilities. Supply chains for quantum technologies are emerging, some focussed on commercially available components for enabling technologies and/or quantum-technologies research infrastructures, others with already higher technology-readiness levels, near to the market. In 2018, the European Commission has launched its large-scale and long-term Quantum Flagship research initiative to support and foster the creation and development of a competitive European quantum technologies industry, as well as the consolidation and expansion of leadership and excellence in European quantum technology research. One of the measures to achieve an accelerated development and uptake has been identified by the Quantum Flagship in its Strategic Research Agenda: the promotion of coordinated, dedicated standardisation and certification efforts. Standardisation is indeed of paramount importance to facilitate the growth of new technologies, and the development of efficient and effective supply chains. The harmonisation of technologies, methodologies, and interfaces enables interoperable products, innovation, and competition, all leading to structuring and hence growth of markets. As quantum technologies are maturing, time has come to start thinking about further standardisation needs. This article presents insights on standardisation for quantum technologies from the perspective of the CEN-CENELEC Focus Group on Quantum Technologies (FGQT), which was established in June 2020 to coordinate and support the development of standards relevant for European industry and research. △ Less

Submitted 3 October, 2022; v1 submitted 3 March, 2022; originally announced March 2022.

Journal ref: EPJ Quantum Technol. 9 (2022) 33

A practical guide for building superconducting quantum devices

Authors: Yvonne Y. Gao, M. Adriaan Rol, Steven Touzard, Chen Wang

Abstract: Quantum computing offers a powerful new paradigm of information processing that has the potential to transform a wide range of industries. In the pursuit of the tantalizing promises of a universal quantum computer, a multitude of new knowledge and expertise has been developed, enabling the construction of novel quantum algorithms as well as increasingly robust quantum hardware. In particular, we h… ▽ More Quantum computing offers a powerful new paradigm of information processing that has the potential to transform a wide range of industries. In the pursuit of the tantalizing promises of a universal quantum computer, a multitude of new knowledge and expertise has been developed, enabling the construction of novel quantum algorithms as well as increasingly robust quantum hardware. In particular, we have witnessed rapid progress in the circuit quantum electrodynamics (cQED) technology, which has emerged as one of the most promising physical systems that is capable of addressing the key challenges in realizing full-stack quantum computing on a large scale. In this article, we present some of the most crucial building blocks developed by the cQED community in recent years and a précis of the latest achievements towards robust universal quantum computation. More importantly, we aim to provide a synoptic outline of the core techniques that underlie most cQED experiments and offer a practical guide for a novice experimentalist to design, construct, and characterize their first quantum device △ Less

Submitted 14 September, 2021; v1 submitted 11 June, 2021; originally announced June 2021.

Variational preparation of finite-temperature states on a quantum computer

Authors: R. Sagastizabal, S. P. Premaratne, B. A. Klaver, M. A. Rol, V. Negîrneac, M. Moreira, X. Zou, S. Johri, N. Muthusubramanian, M. Beekman, C. Zachariadis, V. P. Ostroukh, N. Haider, A. Bruno, A. Y. Matsuura, L. DiCarlo

Abstract: The preparation of thermal equilibrium states is important for the simulation of condensed-matter and cosmology systems using a quantum computer. We present a method to prepare such mixed states with unitary operators, and demonstrate this technique experimentally using a gate-based quantum processor. Our method targets the generation of thermofield double states using a hybrid quantum-classical v… ▽ More The preparation of thermal equilibrium states is important for the simulation of condensed-matter and cosmology systems using a quantum computer. We present a method to prepare such mixed states with unitary operators, and demonstrate this technique experimentally using a gate-based quantum processor. Our method targets the generation of thermofield double states using a hybrid quantum-classical variational approach motivated by quantum-approximate optimization algorithms, without prior calculation of optimal variational parameters by numerical simulation. The fidelity of generated states to the thermal-equilibrium state smoothly varies from 99 to 75% between infinite and near-zero simulated temperature, in quantitative agreement with numerical simulations of the noisy quantum processor with error parameters drawn from experiment. △ Less

Submitted 7 December, 2020; originally announced December 2020.

OpenQL : A Portable Quantum Programming Framework for Quantum Accelerators

Authors: N. Khammassi, I. Ashraf, J. v. Someren, R. Nane, A. M. Krol, M. A. Rol, L. Lao, K. Bertels, C. G. Almudever

Abstract: With the potential of quantum algorithms to solve intractable classical problems, quantum computing is rapidly evolving and more algorithms are being developed and optimized. Expressing these quantum algorithms using a high-level language and making them executable on a quantum processor while abstracting away hardware details is a challenging task. Firstly, a quantum programming language should p… ▽ More With the potential of quantum algorithms to solve intractable classical problems, quantum computing is rapidly evolving and more algorithms are being developed and optimized. Expressing these quantum algorithms using a high-level language and making them executable on a quantum processor while abstracting away hardware details is a challenging task. Firstly, a quantum programming language should provide an intuitive programming interface to describe those algorithms. Then a compiler has to transform the program into a quantum circuit, optimize it and map it to the target quantum processor respecting the hardware constraints such as the supported quantum operations, the qubit connectivity, and the control electronics limitations. In this paper, we propose a quantum programming framework named OpenQL, which includes a high-level quantum programming language and its associated quantum compiler. We present the programming interface of OpenQL, we describe the different layers of the compiler and how we can provide portability over different qubit technologies. Our experiments show that OpenQL allows the execution of the same high-level algorithm on two different qubit technologies, namely superconducting qubits and Si-Spin qubits. Besides the executable code, OpenQL also produces an intermediate quantum assembly code (cQASM), which is technology-independent and can be simulated using the QX simulator. △ Less

Submitted 27 May, 2020; originally announced May 2020.

Enhancing a Near-Term Quantum Accelerator's Instruction Set Architecture for Materials Science Applications

Authors: Xiang Zou, Shavindra P. Premaratne, M. Adriaan Rol, Sonika Johri, Viacheslav Ostroukh, David J. Michalak, Roman Caudillo, James S. Clarke, Leonardo Dicarlo, A. Y. Matsuura

Abstract: Quantum computers with tens to hundreds of noisy qubits are being developed today. To be useful for real-world applications, we believe that these near-term systems cannot simply be scaled-down non-error-corrected versions of future fault-tolerant large-scale quantum computers. These near-term systems require specific architecture and design attributes to realize their full potential. To efficient… ▽ More Quantum computers with tens to hundreds of noisy qubits are being developed today. To be useful for real-world applications, we believe that these near-term systems cannot simply be scaled-down non-error-corrected versions of future fault-tolerant large-scale quantum computers. These near-term systems require specific architecture and design attributes to realize their full potential. To efficiently execute an algorithm, the quantum coprocessor must be designed to scale with respect to qubit number and to maximize useful computation within the qubits' decoherence bounds. In this work, we employ an application-system-qubit co-design methodology to architect a near-term quantum coprocessor. To support algorithms from the real-world application area of simulating the quantum dynamics of a material system, we design a (parameterized) arbitrary single-qubit rotation instruction and a two-qubit entangling controlled-Z instruction. We introduce dynamic gate set and paging mechanisms to implement the instructions. To evaluate the functionality and performance of these two instructions, we implement a two-qubit version of an algorithm to study a disorder-induced metal-insulator transition and run 60 random instances of it, each of which realizes one disorder configuration and contains 40 two-qubit instructions (or gates) and 104 single-qubit instructions. We observe the expected quantum dynamics of the time-evolution of this system. △ Less

Submitted 6 March, 2020; originally announced March 2020.

Comments: Received August 15, 2019; revised December 9, 2019; accepted December 13, 2019; date of publication January 28, 2020; date of current version February 14, 2020

Journal ref: in IEEE Transactions on Quantum Engineering, vol. 1, pp. 1-7, 2020, Art no. 4500307

Time-domain characterization and correction of on-chip distortion of control pulses in a quantum processor

Authors: M. A. Rol, L. Ciorciaro, F. K. Malinowski, B. M. Tarasinski, R. E. Sagastizabal, C. C. Bultink, Y. Salathe, N. Haandbaek, J. Sedivy, L. DiCarlo

Abstract: We introduce Cryoscope, a method for sampling on-chip baseband pulses used to dynamically control qubit frequency in a quantum processor. We specifically use Cryoscope to measure the step response of the dedicated flux control lines of two-junction transmon qubits in circuit QED processors with the temporal resolution of the room-temperature arbitrary waveform generator producing the control pulse… ▽ More We introduce Cryoscope, a method for sampling on-chip baseband pulses used to dynamically control qubit frequency in a quantum processor. We specifically use Cryoscope to measure the step response of the dedicated flux control lines of two-junction transmon qubits in circuit QED processors with the temporal resolution of the room-temperature arbitrary waveform generator producing the control pulses. As a first application, we iteratively improve this step response using optimized real-time digital filters to counter the linear-dynamical distortion in the control line, as needed for high-fidelity, repeatable one- and two-qubit gates based on dynamical control of qubit frequency. △ Less

Submitted 27 February, 2020; v1 submitted 10 July, 2019; originally announced July 2019.

Protecting quantum entanglement from leakage and qubit errors via repetitive parity measurements

Authors: C. C. Bultink, T. E. O'Brien, R. Vollmer, N. Muthusubramanian, M. W. Beekman, M. A. Rol, X. Fu, B. Tarasinski, V. Ostroukh, B. Varbanov, A. Bruno, L. DiCarlo

Abstract: Protecting quantum information from errors is essential for large-scale quantum computation. Quantum error correction (QEC) encodes information in entangled states of many qubits, and performs parity measurements to identify errors without destroying the encoded information. However, traditional QEC cannot handle leakage from the qubit computational space. Leakage affects leading experimental plat… ▽ More Protecting quantum information from errors is essential for large-scale quantum computation. Quantum error correction (QEC) encodes information in entangled states of many qubits, and performs parity measurements to identify errors without destroying the encoded information. However, traditional QEC cannot handle leakage from the qubit computational space. Leakage affects leading experimental platforms, based on trapped ions and superconducting circuits, which use effective qubits within many-level physical systems. We investigate how two-transmon entangled states evolve under repeated parity measurements, and demonstrate the use of hidden Markov models to detect leakage using only the record of parity measurement outcomes required for QEC. We show the stabilization of Bell states over up to 26 parity measurements by mitigating leakage using postselection, and correcting qubit errors using Pauli-frame transformations. Our leakage identification method is computationally efficient and thus compatible with real-time leakage tracking and correction in larger quantum processors. △ Less

Submitted 18 April, 2020; v1 submitted 29 May, 2019; originally announced May 2019.

Comments: 22 pages, 15 figures

Journal ref: Science Advances 20 Mar 2020: Vol. 6, no. 12

A fast, low-leakage, high-fidelity two-qubit gate for a programmable superconducting quantum computer

Authors: M. A. Rol, F. Battistel, F. K. Malinowski, C. C. Bultink, B. M. Tarasinski, R. Vollmer, N. Haider, N. Muthusubramanian, A. Bruno, B. M. Terhal, L. DiCarlo

Abstract: A common approach to realize conditional-phase (CZ) gates in transmon qubits relies on flux control of the qubit frequency to make computational states interact with non-computational ones using a fast-adiabatic trajectory to minimize leakage. We develop a bipolar flux-pulsing method with two key advantages over the traditional unipolar variant. First, the action of the bipolar pulse is robust to… ▽ More A common approach to realize conditional-phase (CZ) gates in transmon qubits relies on flux control of the qubit frequency to make computational states interact with non-computational ones using a fast-adiabatic trajectory to minimize leakage. We develop a bipolar flux-pulsing method with two key advantages over the traditional unipolar variant. First, the action of the bipolar pulse is robust to long-timescale linear-dynamical distortions in the flux-control line, facilitating tuneup and ensuring atomic repeatability. Second, the flux symmetry of the transmon Hamiltonian makes the conditional phase and the single-qubit phase of the pulsed qubit first-order insensitive to low-frequency flux noise, increasing fidelity. By harnessing destructive interference to minimize leakage, the bipolar pulse can approach the speed limit set by the exchange coupling. We demonstrate a repeatable, high-fidelity ($99.1\%$), low-leakage ($0.1\%$), and fast ($40~\mathrm{ns}$) CZ gate in a circuit QED quantum processor. Detailed numerical simulations with excellent match to experiment show that leakage is dominated by remaining short-timescale distortions and fidelity is limited by high-frequency flux noise. △ Less

Submitted 6 March, 2019; originally announced March 2019.

Journal ref: Phys. Rev. Lett. 123, 120502 (2019)

Error Mitigation by Symmetry Verification on a Variational Quantum Eigensolver

Authors: R. Sagastizabal, X. Bonet-Monroig, M. Singh, M. A. Rol, C. C. Bultink, X. Fu, C. H. Price, V. P. Ostroukh, N. Muthusubramanian, A. Bruno, M. Beekman, N. Haider, T. E. O'Brien, L. DiCarlo

Abstract: Variational quantum eigensolvers offer a small-scale testbed to demonstrate the performance of error mitigation techniques with low experimental overhead. We present successful error mitigation by applying the recently proposed symmetry verification technique to the experimental estimation of the ground-state energy and ground state of the hydrogen molecule. A finely adjustable exchange interactio… ▽ More Variational quantum eigensolvers offer a small-scale testbed to demonstrate the performance of error mitigation techniques with low experimental overhead. We present successful error mitigation by applying the recently proposed symmetry verification technique to the experimental estimation of the ground-state energy and ground state of the hydrogen molecule. A finely adjustable exchange interaction between two qubits in a circuit QED processor efficiently prepares variational ansatz states in the single-excitation subspace respecting the parity symmetry of the qubit-mapped Hamiltonian. Symmetry verification improves the energy and state estimates by mitigating the effects of qubit relaxation and residual qubit excitation, which violate the symmetry. A full-density-matrix simulation matching the experiment dissects the contribution of these mechanisms from other calibrated error sources. Enforcing positivity of the measured density matrix via scalable convex optimization correlates the energy and state estimate improvements when using symmetry verification, with interesting implications for determining system properties beyond the ground-state energy. △ Less

Submitted 28 February, 2019; originally announced February 2019.

Comments: 7 pages, 4 figures + 6 pages, 4 figures in supplemental material

Journal ref: Phys. Rev. A 100, 010302 (2019)

eQASM: An Executable Quantum Instruction Set Architecture

Authors: X. Fu, L. Riesebos, M. A. Rol, J. van Straten, J. van Someren, N. Khammassi, I. Ashraf, R. F. L. Vermeulen, V. Newsum, K. K. L. Loh, J. C. de Sterke, W. J. Vlothuizen, R. N. Schouten, C. G. Almudever, L. DiCarlo, K. Bertels

Abstract: A widely-used quantum programming paradigm comprises of both the data flow and control flow. Existing quantum hardware cannot well support the control flow, significantly limiting the range of quantum software executable on the hardware. By analyzing the constraints in the control microarchitecture, we found that existing quantum assembly languages are either too high-level or too restricted to su… ▽ More A widely-used quantum programming paradigm comprises of both the data flow and control flow. Existing quantum hardware cannot well support the control flow, significantly limiting the range of quantum software executable on the hardware. By analyzing the constraints in the control microarchitecture, we found that existing quantum assembly languages are either too high-level or too restricted to support comprehensive flow control on the hardware. Also, as observed with the quantum microinstruction set QuMIS, the quantum instruction set architecture (QISA) design may suffer from limited scalability and flexibility because of microarchitectural constraints. It is an open challenge to design a scalable and flexible QISA which provides a comprehensive abstraction of the quantum hardware. In this paper, we propose an executable QISA, called eQASM, that can be translated from quantum assembly language (QASM), supports comprehensive quantum program flow control, and is executed on a quantum control microarchitecture. With efficient timing specification, single-operation-multiple-qubit execution, and a very-long-instruction-word architecture, eQASM presents better scalability than QuMIS. The definition of eQASM focuses on the assembly level to be expressive. Quantum operations are configured at compile time instead of being defined at QISA design time. We instantiate eQASM into a 32-bit instruction set targeting a seven-qubit superconducting quantum processor. We validate our design by performing several experiments on a two-qubit quantum processor. △ Less

Submitted 9 March, 2019; v1 submitted 7 August, 2018; originally announced August 2018.

Comments: 13 pages, 8 figures; added abstract, re-positioned figures

Journal ref: Proceedings of the 25th International Symposium on High-Performance Computer Architecture (HPCA'19), 2019

Evolution of Nanowire Transmons and Their Quantum Coherence in Magnetic Field

Authors: F. Luthi, T. Stavenga, O. W. Enzing, A. Bruno, C. Dickel, N. K. Langford, M. A. Rol, T. S. Jespersen, J. Nygard, P. Krogstrup, L. DiCarlo

Abstract: We present an experimental study of nanowire transmons at zero and applied in-plane magnetic field. With Josephson non-linearities provided by the nanowires, our qubits operate at higher magnetic fields than standard transmons. Nanowire transmons exhibit coherence up to 70 mT, where the induced superconducting gap in the nanowire closes. We demonstrate that on-chip charge noise coupling to the Jos… ▽ More We present an experimental study of nanowire transmons at zero and applied in-plane magnetic field. With Josephson non-linearities provided by the nanowires, our qubits operate at higher magnetic fields than standard transmons. Nanowire transmons exhibit coherence up to 70 mT, where the induced superconducting gap in the nanowire closes. We demonstrate that on-chip charge noise coupling to the Josephson energy plays a dominant role in the qubit dephasing. This takes the form of strongly-coupled two-level systems switching on 100 ms timescales and a more weakly coupled background producing $1/f$ noise. Several observations, including the field dependence of qubit energy relaxation and dephasing, are not fully understood, inviting further experimental investigation and theory. Using nanowires with a thinner superconducting shell will enable operation of these circuits up to 0.5 T, a regime relevant for topological quantum computation. △ Less

Submitted 21 November, 2017; originally announced November 2017.

Journal ref: Phys. Rev. Lett. 120, 100502 (2018)

An Experimental Microarchitecture for a Superconducting Quantum Processor

Authors: X. Fu, M. A. Rol, C. C. Bultink, J. van Someren, N. Khammassi, I. Ashraf, R. F. L. Vermeulen, J. C. de Sterke, W. J. Vlothuizen, R. N. Schouten, C. G. Almudever, L. DiCarlo, K. Bertels

Abstract: Quantum computers promise to solve certain problems that are intractable for classical computers, such as factoring large numbers and simulating quantum systems. To date, research in quantum computer engineering has focused primarily at opposite ends of the required system stack: devising high-level programming languages and compilers to describe and optimize quantum algorithms, and building relia… ▽ More Quantum computers promise to solve certain problems that are intractable for classical computers, such as factoring large numbers and simulating quantum systems. To date, research in quantum computer engineering has focused primarily at opposite ends of the required system stack: devising high-level programming languages and compilers to describe and optimize quantum algorithms, and building reliable low-level quantum hardware. Relatively little attention has been given to using the compiler output to fully control the operations on experimental quantum processors. Bridging this gap, we propose and build a prototype of a flexible control microarchitecture supporting quantum-classical mixed code for a superconducting quantum processor. The microarchitecture is based on three core elements: (i) a codeword-based event control scheme, (ii) queue-based precise event timing control, and (iii) a flexible multilevel instruction decoding mechanism for control. We design a set of quantum microinstructions that allows flexible control of quantum operations with precise timing. We demonstrate the microarchitecture and microinstruction set by performing a standard gate-characterization experiment on a transmon qubit. △ Less

Submitted 25 August, 2017; originally announced August 2017.

Comments: 13 pages including reference. 9 figures

ACM Class: C.0, B.1.5, C.1.3

Capacity estimation and verification of quantum channels with arbitrarily correlated errors

Authors: Corsin Pfister, M. Adriaan Rol, Atul Mantri, Marco Tomamichel, Stephanie Wehner

Abstract: One of the main figures of merit for quantum memories and quantum communication devices is their quantum capacity. It has been studied for arbitrary kinds of quantum channels, but its practical estimation has so far been limited to devices that implement independent and identically distributed (i.i.d.) quantum channels, where each qubit is affected by the same noise process. Real devices, however,… ▽ More One of the main figures of merit for quantum memories and quantum communication devices is their quantum capacity. It has been studied for arbitrary kinds of quantum channels, but its practical estimation has so far been limited to devices that implement independent and identically distributed (i.i.d.) quantum channels, where each qubit is affected by the same noise process. Real devices, however, typically exhibit correlated errors. Here, we overcome this limitation by presenting protocols that estimate a channel's one-shot quantum capacity for the case where the device acts on (an arbitrary number of) qubits. The one-shot quantum capacity quantifies a device's ability to store or communicate quantum information, even if there are correlated errors across the different qubits. We present a protocol which is easy to implement and which comes in two versions. The first version estimates the one-shot quantum capacity by preparing and measuring in two different bases, where all involved qubits are used as test qubits. The second version verifies on-the-fly that a channel's one-shot quantum capacity exceeds a minimal tolerated value while storing or communicating data, therefore combining test qubits and data qubits in one protocol. We discuss the performance of our method using simple examples, such as the dephasing channel for which our method is asymptotically optimal. Finally, we apply our method to estimate the one-shot capacity in an experiment using a transmon qubit. △ Less

Submitted 16 November, 2016; originally announced November 2016.

Comments: 9+13 pages, 10 figures, see dataAnalysisScript (analysis.py and readme.txt) for a Python script that applies this method to your experimental data

Journal ref: Nature Communications, Vol 9, Number 27 (2018)

Restless Tuneup of High-Fidelity Qubit Gates

Authors: M. A. Rol, C. C. Bultink, T. E. O'Brien, S. R. de Jong, L. S. Theis, X. Fu, F. Luthi, R. F. L. Vermeulen, J. C. de Sterke, A. Bruno, D. Deurloo, R. N. Schouten, F. K. Wilhelm, L. DiCarlo

Abstract: We present a tuneup protocol for qubit gates with tenfold speedup over traditional methods reliant on qubit initialization by energy relaxation. This speedup is achieved by constructing a cost function for Nelder-Mead optimization from real-time correlation of non-demolition measurements interleaving gate operations without pause. Applying the protocol on a transmon qubit achieves 0.999 average Cl… ▽ More We present a tuneup protocol for qubit gates with tenfold speedup over traditional methods reliant on qubit initialization by energy relaxation. This speedup is achieved by constructing a cost function for Nelder-Mead optimization from real-time correlation of non-demolition measurements interleaving gate operations without pause. Applying the protocol on a transmon qubit achieves 0.999 average Clifford fidelity in one minute, as independently verified using randomized benchmarking and gate set tomography. The adjustable sensitivity of the cost function allows detecting fractional changes in gate error with nearly constant signal-to-noise ratio. The restless concept demonstrated can be readily extended to the tuneup of two-qubit gates and measurement operations. △ Less

Submitted 15 November, 2016; originally announced November 2016.

Journal ref: Phys. Rev. Applied 7, 041001 (2017)

Active resonator reset in the nonlinear dispersive regime of circuit QED

Authors: C. C. Bultink, M. A. Rol, T. E. O'Brien, X. Fu, B. C. S. Dikken, C. Dickel, R. F. L. Vermeulen, J. C. de Sterke, A. Bruno, R. N. Schouten, L. DiCarlo

Abstract: We present two pulse schemes for actively depleting measurement photons from a readout resonator in the nonlinear dispersive regime of circuit QED. One method uses digital feedback conditioned on the measurement outcome while the other is unconditional. In the absence of analytic forms and symmetries to exploit in this nonlinear regime, the depletion pulses are numerically optimized using the Powe… ▽ More We present two pulse schemes for actively depleting measurement photons from a readout resonator in the nonlinear dispersive regime of circuit QED. One method uses digital feedback conditioned on the measurement outcome while the other is unconditional. In the absence of analytic forms and symmetries to exploit in this nonlinear regime, the depletion pulses are numerically optimized using the Powell method. We shorten the photon depletion time by more than six inverse resonator linewidths compared to passive depletion by waiting. We quantify the benefit by emulating an ancilla qubit performing repeated quantum parity checks in a repetition code. Fast depletion increases the mean number of cycles to a spurious error detection event from order 1 to 75 at a 1 microsecond cycle time. △ Less

Submitted 27 June, 2016; v1 submitted 4 April, 2016; originally announced April 2016.

Comments: 10 pages, 9 figures

Journal ref: Phys. Rev. Applied 6, 034008 (2016)

Independent, extensible control of same-frequency superconducting qubits by selective broadcasting

Authors: S. Asaad, C. Dickel, S. Poletto, A. Bruno, N. K. Langford, M. A. Rol, D. Deurloo, L. DiCarlo

Abstract: A critical ingredient for realizing large-scale quantum information processors will be the ability to make economical use of qubit control hardware. We demonstrate an extensible strategy for reusing control hardware on same-frequency transmon qubits in a circuit QED chip with surface-code-compatible connectivity. A vector switch matrix enables selective broadcasting of input pulses to multiple tra… ▽ More A critical ingredient for realizing large-scale quantum information processors will be the ability to make economical use of qubit control hardware. We demonstrate an extensible strategy for reusing control hardware on same-frequency transmon qubits in a circuit QED chip with surface-code-compatible connectivity. A vector switch matrix enables selective broadcasting of input pulses to multiple transmons with individual tailoring of pulse quadratures for each, as required to minimize the effects of leakage on weakly anharmonic qubits. Using randomized benchmarking, we compare multiple broadcasting strategies that each pass the surface-code error threshold for single-qubit gates. In particular, we introduce a selective-broadcasting control strategy using five pulse primitives, which allows independent, simultaneous Clifford gates on arbitrary numbers of qubits. △ Less

Submitted 26 August, 2015; originally announced August 2015.

Comments: Main text: 5 pages, 4 figures; Supplemental Material: 11 pages, 13 figures

Journal ref: npj Quantum Information 2, 16029 (2016)

Repeated quantum error correction on a continuously encoded qubit by real-time feedback

Authors: Julia Cramer, Norbert Kalb, M. Adriaan Rol, Bas Hensen, Machiel S. Blok, Matthew Markham, Daniel J. Twitchen, Ronald Hanson, Tim H. Taminiau

Abstract: Reliable quantum information processing in the face of errors is a major fundamental and technological challenge. Quantum error correction protects quantum states by encoding a logical quantum bit (qubit) in multiple physical qubits. To be compatible with universal fault-tolerant computations, it is essential that the states remain encoded at all times and that errors are actively corrected. Here… ▽ More Reliable quantum information processing in the face of errors is a major fundamental and technological challenge. Quantum error correction protects quantum states by encoding a logical quantum bit (qubit) in multiple physical qubits. To be compatible with universal fault-tolerant computations, it is essential that the states remain encoded at all times and that errors are actively corrected. Here we demonstrate such active error correction on a continuously protected qubit using a diamond quantum processor. We encode a logical qubit in three long-lived nuclear spins, repeatedly detect phase errors by non-destructive measurements using an ancilla electron spin, and apply corrections on the encoded state by real-time feedback. The actively error-corrected qubit is robust against errors and multiple rounds of error correction prevent errors from accumulating. Moreover, by correcting correlated phase errors naturally induced by the environment, we demonstrate that encoded quantum superposition states are preserved beyond the dephasing time of the best physical qubit used in the encoding. These results establish a powerful platform for the fundamental investigation of error correction under different types of noise and mark an important step towards fault-tolerant quantum information processing. △ Less

Submitted 10 April, 2016; v1 submitted 6 August, 2015; originally announced August 2015.

Journal ref: Nat. Commun. 7, 11526 (2016)