-
Optomechanically Induced Transparency/Absorption in a 3D Microwave Cavity Architecture at Ambient Temperature
Authors:
Sumit Kumar,
Matthew Kenworthy,
Henry Ginn,
Xavier Rojas
Abstract:
Leveraging advancements in cavity optomechanics, we explore Optomechanically Induced Transparency/Absorption (OMIT/OMIA) in the microwave domain at ambient temperature. Contrary to previous works employing cryogenic temperatures, this work exploits a 3D microwave cavity architecture to observe these effects at ambient temperature, broadening the scope of possible applications. The work successfull…
▽ More
Leveraging advancements in cavity optomechanics, we explore Optomechanically Induced Transparency/Absorption (OMIT/OMIA) in the microwave domain at ambient temperature. Contrary to previous works employing cryogenic temperatures, this work exploits a 3D microwave cavity architecture to observe these effects at ambient temperature, broadening the scope of possible applications. The work successfully enhances the optomechanical coupling strength, enabling observable and robust OMIT/OMIA effects, and demonstrating up to 25 dB in signal amplification and 20 dB in attenuation. Operating in the unresolved sideband regime enables tunability across a wider frequency range, enhancing the system's applicability in signal processing and sensing. The findings herein highlight the potential of optomechanical systems, presenting a simplified, cost-effective, and more feasible approach for applications at ambient temperature.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
QUEST-DMC: Background Modelling and Resulting Heat Deposit for a Superfluid Helium-3 Bolometer
Authors:
S. Autti,
A. Casey,
N. Eng,
N. Darvishi,
P. Franchini,
R. P. Haley,
P. J. Heikkinen,
A. Kemp,
E. Leason,
L. V. Levitin,
J. Monroe,
J. March-Russel,
M. T. Noble,
J. R. Prance,
X. Rojas,
T. Salmon,
J. Saunders,
R. Smith,
M. D. Thompson,
V. Tsepelin,
S. M. West,
L. Whitehead,
K. Zhang,
D. E. Zmeev
Abstract:
We report the results of radioactivity assays and heat leak calculations for a range of common cryogenic materials, considered for use in the QUEST-DMC superfluid 3He dark matter detector. The bolometer, instrumented with nanomechanical resonators, will be sensitive to energy deposits from dark matter interactions. Events from radioactive decays and cosmic rays constitute a significant background…
▽ More
We report the results of radioactivity assays and heat leak calculations for a range of common cryogenic materials, considered for use in the QUEST-DMC superfluid 3He dark matter detector. The bolometer, instrumented with nanomechanical resonators, will be sensitive to energy deposits from dark matter interactions. Events from radioactive decays and cosmic rays constitute a significant background and must be precisely modelled, using a combination of material screening and Monte Carlo simulations. However, the results presented here are of wider interest for experiments and quantum devices sensitive to minute heat leaks and spurious events, thus we present heat leak per unit mass or surface area for every material studied. This can inform material choices for other experiments, especially if underground operation is considered where the radiogenic backgrounds will dominate even at shallow depths.
△ Less
Submitted 19 May, 2024; v1 submitted 31 January, 2024;
originally announced February 2024.
-
arXiv:2401.06079
[pdf]
cond-mat.supr-con
astro-ph.CO
cond-mat.mes-hall
cond-mat.quant-gas
cond-mat.stat-mech
physics.ins-det
Nanofluidic platform for studying the first-order phase transitions in superfluid helium-3
Authors:
Petri J. Heikkinen,
Nathan Eng,
Lev V. Levitin,
Xavier Rojas,
Angadjit Singh,
Samuli Autti,
Richard P. Haley,
Mark Hindmarsh,
Dmitry E. Zmeev,
Jeevak M. Parpia,
Andrew Casey,
John Saunders
Abstract:
The symmetry-breaking first-order phase transition between superfluid phases $^3$He-A and $^3$He-B can be triggered extrinsically by ionising radiation or heterogeneous nucleation arising from the details of the sample cell construction. However, the role of potential homogeneous intrinsic nucleation mechanisms remains elusive. Discovering and resolving the intrinsic processes may have cosmologica…
▽ More
The symmetry-breaking first-order phase transition between superfluid phases $^3$He-A and $^3$He-B can be triggered extrinsically by ionising radiation or heterogeneous nucleation arising from the details of the sample cell construction. However, the role of potential homogeneous intrinsic nucleation mechanisms remains elusive. Discovering and resolving the intrinsic processes may have cosmological consequences, since an analogous first-order phase transition, and the production of gravitational waves, has been predicted for the very early stages of the expanding Universe in many extensions of the Standard Model of particle physics. Here we introduce a new approach for probing the phase transition in superfluid $^3$He. The setup consists of a novel stepped-height nanofluidic sample container with close to atomically smooth walls. The $^3$He is confined in five tiny nanofabricated volumes and assayed non-invasively by NMR. Tuning of the state of $^3$He by confinement is used to isolate each of these five volumes so that the phase transitions in them can occur independently and free from any obvious sources of heterogeneous nucleation. The small volumes also ensure that the transitions triggered by ionising radiation are strongly suppressed. Here we present the preliminary measurements using this setup, showing both strong supercooling of $^3$He-A and superheating of $^3$He-B, with stochastic processes dominating the phase transitions between the two. The objective is to study the nucleation as a function of temperature and pressure over the full phase diagram, to both better test the proposed extrinsic mechanisms and seek potential parallel intrinsic mechanisms.
△ Less
Submitted 29 May, 2024; v1 submitted 11 January, 2024;
originally announced January 2024.
-
Long nanomechanical resonators with circular cross-section
Authors:
Samuli Autti,
Andrew Casey,
Marie Connelly,
Neda Darvishi,
Paolo Franchini,
James Gorman,
Richard P. Haley,
Petri J. Heikkinen,
Ashlea Kemp,
Elizabeth Leason,
John March-Russell,
Jocelyn Monroe,
Theo Noble,
George R. Pickett,
Jonathan R. Prance,
Xavier Rojas,
Tineke Salmon,
John Saunders,
Jack Slater,
Robert Smith,
Michael D. Thompson,
Stephen M. West,
Luke Whitehead,
Vladislav V. Zavjalov,
Kuang Zhang
, et al. (1 additional authors not shown)
Abstract:
Fabrication of superconducting nanomechanical resonators for quantum research, detectors and devices traditionally relies on a lithographic process, resulting in oscillators with sharp edges and a suspended length limited to a few 100 micrometres. We report a low-investment top-down approach to fabricating NbTi nanowire resonators with suspended lengths up to several millimetres and diameters down…
▽ More
Fabrication of superconducting nanomechanical resonators for quantum research, detectors and devices traditionally relies on a lithographic process, resulting in oscillators with sharp edges and a suspended length limited to a few 100 micrometres. We report a low-investment top-down approach to fabricating NbTi nanowire resonators with suspended lengths up to several millimetres and diameters down to 100 nanometres. The nanowires possess high critical currents and fields, making them a natural choice for magnetomotive actuation and sensing. This fabrication technique is independent of the substrate material, dimensions and layout and can readily be adapted to fabricate nanowire resonators from any metal or alloy with suitable ductility and yield strength. Our work thus opens access to a new class of nanomechanical devices with applications including microscopic and mesoscopic investigations of quantum fluids, detecting dark matter and fundamental materials research in one-dimensional superconductors in vacuum.
△ Less
Submitted 4 November, 2023;
originally announced November 2023.
-
QUEST-DMC superfluid $^3$He detector for sub-GeV dark matter
Authors:
S. Autti,
A. Casey,
N. Eng,
N. Darvishi,
P. Franchini,
R. P. Haley,
P. J. Heikkinen,
A. Jennings,
A. Kemp,
E. Leason,
L. V. Levitin,
J. Monroe,
J. March-Russel,
M. T. Noble,
J. R. Prance,
X. Rojas,
T. Salmon,
J. Saunders,
R. Smith,
M. D. Thompson,
V. Tsepelin,
S. M. West,
L. Whitehead,
V. V. Zavjalov,
D. E. Zmeev
Abstract:
The focus of dark matter searches to date has been on Weakly Interacting Massive Particles (WIMPs) in the GeV/$c^2$-TeV/$c^2$ mass range. The direct, indirect and collider searches in this mass range have been extensive but ultimately unsuccessful, providing a strong motivation for widening the search outside this range. Here we describe a new concept for a dark matter experiment, employing superf…
▽ More
The focus of dark matter searches to date has been on Weakly Interacting Massive Particles (WIMPs) in the GeV/$c^2$-TeV/$c^2$ mass range. The direct, indirect and collider searches in this mass range have been extensive but ultimately unsuccessful, providing a strong motivation for widening the search outside this range. Here we describe a new concept for a dark matter experiment, employing superfluid $^3$He as a detector for dark matter that is close to the mass of the proton, of order 1 GeV/$c^2$. The QUEST-DMC detector concept is based on quasiparticle detection in a bolometer cell by a nanomechanical resonator. In this paper we develop the energy measurement methodology and detector response model, simulate candidate dark matter signals and expected background interactions, and calculate the sensitivity of such a detector. We project that such a detector can reach sub-eV nuclear recoil energy threshold, opening up new windows on the parameter space of both spin-dependent and spin-independent interactions of light dark matter candidates.
△ Less
Submitted 14 March, 2024; v1 submitted 17 October, 2023;
originally announced October 2023.
-
Third sound detectors in accelerated motion
Authors:
Cameron R. D. Bunney,
Vitor S. Barroso,
Steffen Biermann,
August Geelmuyden,
Cisco Gooding,
Grégoire Ithier,
Xavier Rojas,
Jorma Louko,
Silke Weinfurtner
Abstract:
An accelerated observer moving through empty space sees particles appearing and disappearing, while an observer with a constant velocity does not register any particles. This phenomenon, generally known as the Unruh effect, relies on an initial vacuum state, thereby unifying the experience of all inertial observers. We propose an experiment to probe this observer-dependent detector response, using…
▽ More
An accelerated observer moving through empty space sees particles appearing and disappearing, while an observer with a constant velocity does not register any particles. This phenomenon, generally known as the Unruh effect, relies on an initial vacuum state, thereby unifying the experience of all inertial observers. We propose an experiment to probe this observer-dependent detector response, using a laser beam in circular motion as a local detector of superfluid helium-4 surface modes or third sound waves. To assess experimental feasibility, we develop a theoretical framework to include a non-zero temperature initial state. We find that an acceleration-dependent signal persists, independent of the initial temperature. By introducing a signal-to-noise measure we show that observing this signal is within experimental reach.
△ Less
Submitted 20 June, 2024; v1 submitted 21 February, 2023;
originally announced February 2023.
-
A Novel Architecture for room temperature microwave optomechanical experiments
Authors:
Sumit Kumar,
Sebastian Spence,
Simon Perrett,
Zaynab Tahir,
Angadjit Singh,
Chichi Qi,
Sara Perez Vizan,
Xavier Rojas
Abstract:
We have developed a novel architecture for room temperature microwave cavity optomechanics, which is based on the coupling of a 3D microwave reentrant cavity to a compliant membrane. Devices parameters have enabled resolving the thermomechanical motion of the membrane, and observing optomechanically induced transparency/absorption in the linear regime, for the first time in a microwave optomechani…
▽ More
We have developed a novel architecture for room temperature microwave cavity optomechanics, which is based on the coupling of a 3D microwave reentrant cavity to a compliant membrane. Devices parameters have enabled resolving the thermomechanical motion of the membrane, and observing optomechanically induced transparency/absorption in the linear regime, for the first time in a microwave optomechanical system operated at room temperature. We have extracted the single photon coupling rate (g0) using four independent measurement techniques, and hence obtain a full characterization of the proposed cavity optomechanical system.
△ Less
Submitted 25 November, 2022; v1 submitted 5 August, 2022;
originally announced August 2022.
-
Superfluid Optomechanics with Phononic Nanostructures
Authors:
S. Spence,
Z. X. Koong,
S. A. R. Horsley,
X. Rojas
Abstract:
In quantum optomechanics, finding materials and strategies to limit losses has been crucial to the progress of the field. Recently, superfluid 4He was proposed as a promising mechanical element for quantum optomechanics. This quantum fluid shows highly desirable properties (e.g. extremely low acoustic loss) for a quantum optomechanical system. In current implementations, superfluid optomechanical…
▽ More
In quantum optomechanics, finding materials and strategies to limit losses has been crucial to the progress of the field. Recently, superfluid 4He was proposed as a promising mechanical element for quantum optomechanics. This quantum fluid shows highly desirable properties (e.g. extremely low acoustic loss) for a quantum optomechanical system. In current implementations, superfluid optomechanical systems suffer from external sources of loss, which spoils the quality factor of resonators. In this work, we propose a new implementation, exploiting nanofluidic confinement. Our approach, based on acoustic resonators formed within phononic nanostructures, aims at limiting radiation losses to preserve the intrinsic properties of superfluid 4He. In this work, we estimate the optomechanical system parameters. Using recent theory, we derive the expected quality factors for acoustic resonators in different thermodynamic conditions. We calculate the sources of loss induced by the phononic nanostructures with numerical simulations. Our results indicate the feasibility of the proposed approach in a broad range of parameters, which opens new prospects for more complex geometries.
△ Less
Submitted 19 December, 2020;
originally announced December 2020.
-
Fragility of surface states in topological superfluid $^3$He
Authors:
P. J. Heikkinen,
A. Casey,
L. V. Levitin,
X. Rojas,
A. Vorontsov,
P. Sharma,
N. Zhelev,
J. M. Parpia,
J. Saunders
Abstract:
Topological superfluid $^3$He, with unconventional spin-triplet p-wave pairing, provides a model system for topological superconductors, which have attracted significant interest through potential applications in topologically protected quantum computing. In topological insulators and quantum Hall systems, the surface/edge states, arising from bulk-surface correspondence and the momentum space top…
▽ More
Topological superfluid $^3$He, with unconventional spin-triplet p-wave pairing, provides a model system for topological superconductors, which have attracted significant interest through potential applications in topologically protected quantum computing. In topological insulators and quantum Hall systems, the surface/edge states, arising from bulk-surface correspondence and the momentum space topology of the band structure, are robust. Here we demonstrate that in topological superconductors the surface Andreev bound states, which depend on the momentum space topology of the emergent order parameter, are fragile with respect to the details of surface scattering. We confine superfluid $^3$He within a cavity of height comparable to the Cooper pair diameter. We precisely determine the superfluid transition temperature $T_{\mathrm{c}}$ and the suppression of the superfluid energy gap, for different scattering conditions tuned in situ, and compare to the predictions of quasi-classical theory. We discover that surface magnetic scattering leads to unexpectedly large suppression of $T_{\mathrm{c}}$, corresponding to an increased density of low energy bound states.
△ Less
Submitted 4 May, 2020; v1 submitted 9 September, 2019;
originally announced September 2019.
-
Fabrication of micro fluidic cavities using Si-to-glass anodic bonding
Authors:
N. Zhelev,
T. S. Abhilash,
R. G. Bennett,
E. N. Smith,
B. Ilic,
J. M. Parpia,
L. V. Levitin,
X. Rojas,
A. Casey,
J. Saunders
Abstract:
We demonstrate the fabrication of $\sim$1.08 $μ$m deep microfluidic cavities with characteristic size as large as 7 mm $\times$ 11 mm or 11 mm diameter, using a silicon$-$glass anodic bonding technique that does not require posts to act as separators to define cavity height. Since the phase diagram of $^3$He is significantly altered under confinement, posts might act as pinning centers for phase b…
▽ More
We demonstrate the fabrication of $\sim$1.08 $μ$m deep microfluidic cavities with characteristic size as large as 7 mm $\times$ 11 mm or 11 mm diameter, using a silicon$-$glass anodic bonding technique that does not require posts to act as separators to define cavity height. Since the phase diagram of $^3$He is significantly altered under confinement, posts might act as pinning centers for phase boundaries. The previous generation of cavities relied on full wafer-bonding which is more prone to failure and requires dicing post-bonding, whereas the these cavities are made by bonding a pre-cut piece of Hoya SD-2 glass to a patterned piece of silicon in which the cavity is defined by etching. Anodic bonding was carried out at 425 $^{\circ}$C with 200 V, and we observe that pressurizing the cavity to failure ($>$ 30 bar pressure) results in glass breaking, rather than the glass-silicon bond separation. In this article, we discuss the detailed fabrication of the cavity, its edges, and details of the junction between the coin silver fill line and the silicon base of the cavity that enables a low internal-friction joint. This feature is important for mass coupling torsional oscillator experimental assays of the superfluid inertial contribution where a high quality factor ($Q$) improves frequency resolution. The surface preparation that yields well-characterized smooth surfaces to eliminate pinning sites, the use of transparent glass as a cover permitting optical access, low temperature capability and attachment of pressure-capable ports for fluid access may be features that are important in other applications.
△ Less
Submitted 12 June, 2018; v1 submitted 2 May, 2018;
originally announced May 2018.
-
The A-B transition in superfluid 3He under confinement in a thin slab geometry
Authors:
N. Zhelev,
T. S. Abhilash,
E. N. Smith,
R. G. Bennett,
X. Rojas,
L. V. Levitin,
J. Saunders,
J. M. Parpia
Abstract:
The influence of confinement on the topological phases of superfluid 3He is studied using the torsional pendulum method. We focus on the phase transition between the chiral A-phase and the time-reversal-invariant B-phase, motivated by the prediction of a spatiallymodulated (stripe) phase at the A-B phase boundary. We confine superfluid 3He to a single 1.08 μm thick nanofluidic cavity incorporated…
▽ More
The influence of confinement on the topological phases of superfluid 3He is studied using the torsional pendulum method. We focus on the phase transition between the chiral A-phase and the time-reversal-invariant B-phase, motivated by the prediction of a spatiallymodulated (stripe) phase at the A-B phase boundary. We confine superfluid 3He to a single 1.08 μm thick nanofluidic cavity incorporated into a high-precision torsion pendulum, and map the phase diagram between 0.1 and 5.6 bar. We observe only small supercooling of the A-phase, in comparison to bulk or when confined in aerogel. This has a non-monotonic pressure dependence, suggesting that a new intrinsic B-phase nucleation mechanism operates under confinement, mediated by the putative stripe phase. Both the phase diagram and the relative superfluid fraction of the A and B phases, show that strong coupling is present at all pressures, with implications for the stability of the stripe phase.
△ Less
Submitted 23 October, 2016;
originally announced October 2016.
-
Ultra-Low Dissipation Superfluid Micromechanical Resonator
Authors:
Fabien Souris,
Xavier Rojas,
Paul H. Kim,
John P. Davis
Abstract:
Micro and nanomechanical resonators with ultra-low dissipation have great potential as useful quantum resources. The superfluid micromechanical resonators presented here possess several advantageous characteristics: straightforward thermalization, dissipationless flow, and in situ tunability. We identify and quantitatively model the various dissipation mechanisms in two resonators, one fabricated…
▽ More
Micro and nanomechanical resonators with ultra-low dissipation have great potential as useful quantum resources. The superfluid micromechanical resonators presented here possess several advantageous characteristics: straightforward thermalization, dissipationless flow, and in situ tunability. We identify and quantitatively model the various dissipation mechanisms in two resonators, one fabricated from borosilicate glass and one from single crystal quartz. As the resonators are cryogenically cooled into the superfluid state, the dam** from thermal effects and from the normal fluid component are strongly suppressed. At our lowest temperatures, dam** is limited solely by internal dissipation in the substrate materials, and reach quality factors up to 913,000 at 13 mK. By lifting this limitation through substrate material choice and resonator design, modelling suggests that the resonators should reach quality factors as high as 10$^8$ at 100 mK, putting this architecture in an ideal position to harness mechanical quantum effects.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
Thermo-mechanical characterization of on-chip buckled dome Fabry-Perot microcavities
Authors:
M. H. Bitarafan,
H. Ramp,
T. W. Allen,
C. Potts,
X. Rojas,
A. J. R. MacDonald,
J. P. Davis,
R. G. DeCorby
Abstract:
We report on the thermomechanical and thermal tuning properties of curved-mirror Fabry-Perot resonators, fabricated by the guided assembly of circular delamination buckles within a multilayer a-Si/SiO2 stack. Analytical models for temperature dependence, effective spring constants, and mechanical mode frequencies are described and shown to be in good agreement with experimental results. The caviti…
▽ More
We report on the thermomechanical and thermal tuning properties of curved-mirror Fabry-Perot resonators, fabricated by the guided assembly of circular delamination buckles within a multilayer a-Si/SiO2 stack. Analytical models for temperature dependence, effective spring constants, and mechanical mode frequencies are described and shown to be in good agreement with experimental results. The cavities exhibit mode volumes as small as $\sim10λ^3$, reflectance-limited finesse $\sim3\times10^3$, and mechanical resonance frequencies in the MHz range. Monolithic cavity arrays of this type might be of interest for applications in sensing, cavity quantum electrodynamics, and optomechanics.
△ Less
Submitted 26 October, 2015;
originally announced October 2015.
-
Optomechanics and thermometry of cryogenic silica microresonators
Authors:
A. J. R. MacDonald,
B. D. Hauer,
X. Rojas,
P. H. Kim,
G. G. Popowich,
J. P. Davis
Abstract:
We present measurements of silica optomechanical resonators, known as bottle resonators, passively cooled in a cryogenic environment. These devices possess a suite of properties that make them advantageous for preparation and measurement in the mechanical ground state, including high mechanical frequency, high optical and mechanical quality factors, and optomechanical sideband resolution. Performi…
▽ More
We present measurements of silica optomechanical resonators, known as bottle resonators, passively cooled in a cryogenic environment. These devices possess a suite of properties that make them advantageous for preparation and measurement in the mechanical ground state, including high mechanical frequency, high optical and mechanical quality factors, and optomechanical sideband resolution. Performing thermometry of the mechanical motion, we find that the optical and mechanical modes demonstrate quantitatively similar laser-induced heating, limiting the lowest average phonon occupation observed to just ~1500. Thermalization to the 9 mK thermal bath would facilitate quantum measurements on these promising nanogram-scale mechanical resonators.
△ Less
Submitted 5 September, 2015;
originally announced September 2015.
-
Optical microscope and tapered fiber coupling apparatus for a dilution refrigerator
Authors:
A. J. R. MacDonald,
G. G. Popowich,
B. D. Hauer,
P. H. Kim,
A. Fredrick,
X. Rojas,
P. Doolin,
J. P. Davis
Abstract:
We have developed a system for tapered fiber measurements of optomechanical resonators inside a dilution refrigerator, which is compatible with both on- and off-chip devices. Our apparatus features full three-dimensional control of the taper-resonator coupling conditions enabling critical coupling, with an overall fiber transmission efficiency of up to 70%. Notably, our design incorporates an opti…
▽ More
We have developed a system for tapered fiber measurements of optomechanical resonators inside a dilution refrigerator, which is compatible with both on- and off-chip devices. Our apparatus features full three-dimensional control of the taper-resonator coupling conditions enabling critical coupling, with an overall fiber transmission efficiency of up to 70%. Notably, our design incorporates an optical microscope system consisting of a coherent bundle of 37,000 optical fibers for real-time imaging of the experiment at a resolution of $\sim$1 $μ$m. We present cryogenic optical and optomechanical measurements of resonators coupled to tapered fibers at temperatures as low as 9 mK.
△ Less
Submitted 27 November, 2014;
originally announced November 2014.
-
Superfluid nanomechanical resonator for quantum nanofluidics
Authors:
X. Rojas,
J. P. Davis
Abstract:
We have developed a nanomechanical resonator, for which the motional degree of freedom is a superfluid 4He oscillating flow confined to precisely defined nanofluidic channels. It is composed of an in-cavity capacitor measuring the dielectric constant, which is coupled to a superfluid Helmholtz resonance within nanoscale channels, and it enables sensitive detection of nanofluidic quantum flow. We p…
▽ More
We have developed a nanomechanical resonator, for which the motional degree of freedom is a superfluid 4He oscillating flow confined to precisely defined nanofluidic channels. It is composed of an in-cavity capacitor measuring the dielectric constant, which is coupled to a superfluid Helmholtz resonance within nanoscale channels, and it enables sensitive detection of nanofluidic quantum flow. We present a model to interpret the dynamics of our superfluid nanomechanical resonator, and we show how it can be used for probing confined geometry effects on thermodynamic functions. We report isobaric measurements of the superfluid fraction in liquid 4He at various pressures, and the onset of quantum turbulence in restricted geometry.
△ Less
Submitted 13 January, 2015; v1 submitted 21 October, 2014;
originally announced October 2014.
-
Ultrasonic Interferometer for First-Sound Measurements of Confined Liquid 4He
Authors:
X. Rojas,
B. D. Hauer,
A. J. R. MacDonald,
P. Saberi,
Y. Yang,
J. P. Davis
Abstract:
We present a new technique for probing the properties of quantum fluids in restricted geometries. We have confined liquid 4He within microfluidic devices formed from glass wafers, in which one dimension is on the micro scale. Using an ultrasonic analog to Fabry-Perot interferometry, we have measured the first-sound of the confined liquid 4He, which can be a probe of critical behavior near the lamb…
▽ More
We present a new technique for probing the properties of quantum fluids in restricted geometries. We have confined liquid 4He within microfluidic devices formed from glass wafers, in which one dimension is on the micro scale. Using an ultrasonic analog to Fabry-Perot interferometry, we have measured the first-sound of the confined liquid 4He, which can be a probe of critical behavior near the lambda point ($T_λ$). All thermodynamic properties of liquid $^4$He can be derived from first-sound and heat capacity measurements, and although quite a bit of experimental work has been done on the latter, no measurement of first-sound has been reported for a precisely confined geometry smaller than a few tens of micrometers. In this work, we report measurements of isobaric first sound in liquid $^4$He confined in cavities as small as ~ 5 $μ$m. Our experimental set-up allows us to pressurize the liquid up to ~ 25 bar without causing deformation of the confined geometry, a pressure which is about 4 times larger than previously reported with similar microfluidic devices. Our preliminary results indicate that one can possibly observe finite-size effects and verify scaling laws, by using similar devices with smaller confinement.
△ Less
Submitted 20 May, 2014; v1 submitted 2 April, 2014;
originally announced April 2014.
-
The giant plasticity of a quantum crystal
Authors:
Ariel Haziot,
Xavier Rojas,
Andrew D. Fefferman,
John R. Beamish,
Sébastien Balibar
Abstract:
When submitted to large stresses at high temperature, usual crystals may irreversibly deform. This phenomenon is known as plasticity and it is due to the motion of crystal defects such as dislocations. We have discovered that, in the absence of impurities and in the zero temperature limit, helium 4 crystals present a giant plasticity that is anisotropic and reversible. Direct measurements on orien…
▽ More
When submitted to large stresses at high temperature, usual crystals may irreversibly deform. This phenomenon is known as plasticity and it is due to the motion of crystal defects such as dislocations. We have discovered that, in the absence of impurities and in the zero temperature limit, helium 4 crystals present a giant plasticity that is anisotropic and reversible. Direct measurements on oriented single crystals show that their resistance to shear nearly vanishes in one particular direction because dislocations glide freely parallel to the basal planes of the hexagonal structure. This plasticity disappears as soon as traces of helium 3 impurities bind to the dislocations or if their motion is damped by collisions with thermal phonons.
△ Less
Submitted 27 November, 2012; v1 submitted 13 November, 2012;
originally announced November 2012.
-
$^4$He Crystal Quality and Rotational Response in a Transparent Torsional Oscillator
Authors:
A. D. Fefferman,
X. Rojas,
A. Haziot,
S. Balibar,
J. T. West,
M. H. W. Chan
Abstract:
We have studied natural purity $^{4}$He single crystals and polycrystals between 10 and 600 mK using a torsional oscillator with a 2 cm$^{3}$ rigid cell made of sapphire with a smooth geometry. As the temperature was lowered, we observed sample dependent but reproducible resonant frequency shifts that could be attributed to a supersolid fraction of order 0.1%. However, these shifts were observed w…
▽ More
We have studied natural purity $^{4}$He single crystals and polycrystals between 10 and 600 mK using a torsional oscillator with a 2 cm$^{3}$ rigid cell made of sapphire with a smooth geometry. As the temperature was lowered, we observed sample dependent but reproducible resonant frequency shifts that could be attributed to a supersolid fraction of order 0.1%. However, these shifts were observed with single crystals, not with polycrystals. Our results indicate that, in our case, the rotational anomaly of solid helium is more likely due to a change in stiffness than to supersolidity. This interpretation would presumably require gliding of dislocations in more directions than previously thought.
△ Less
Submitted 30 January, 2012; v1 submitted 27 December, 2011;
originally announced December 2011.
