-
The O2 software framework and GPU usage in ALICE online and offline reconstruction in Run 3
Authors:
Giulio Eulisse,
David Rohr
Abstract:
ALICE has upgraded many of its detectors for LHC Run 3 to operate in continuous readout mode recording Pb--Pb collisions at 50 kHz interaction rate without trigger. This results in the need to process data in real time at rates 100 times higher than during Run 2. In order to tackle such a challenge we introduced O2, a new computing system and the associated infrastructure. Designed and implemented…
▽ More
ALICE has upgraded many of its detectors for LHC Run 3 to operate in continuous readout mode recording Pb--Pb collisions at 50 kHz interaction rate without trigger. This results in the need to process data in real time at rates 100 times higher than during Run 2. In order to tackle such a challenge we introduced O2, a new computing system and the associated infrastructure. Designed and implemented during the LHC long shutdown 2, O2 is now in production taking care of all the data processing needs of the experiment. O2 is designed around the message passing paradigm, enabling resilient, parallel data processing for both the synchronous (to LHC beam) and asynchronous data taking and processing phases. The main purpose of the synchronous online reconstruction is detector calibration and raw data compression. This synchronous processing is dominated by the TPC detector, which produces by far the largest data volume, and TPC reconstruction runs fully on GPUs. When there is no beam in the LHC, the powerful GPU-equipped online computing farm of ALICE is used for the asynchronous reconstruction, which creates the final reconstructed output for analysis from the compressed raw data. Since the majority of the compute performance of the online farm is in the GPUs, and since the asynchronous processing is not dominated by the TPC in the way the synchronous processing is, there is an ongoing effort to offload a significant amount of compute load from other detectors to the GPU as well.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
The ALICE Run 3 Online / Offline Processing
Authors:
David Rohr
Abstract:
The ALICE experiment has undergone a major upgrade for LHC Run 3 and will collect data at an interaction rate 50 times larger than before. The new computing scheme for Run 3 replaces the traditionally separate online and offline frameworks by a unified one, which is called O2. Processing will happen in two phases. During data taking, a synchronous processing phase performs data compression, calibr…
▽ More
The ALICE experiment has undergone a major upgrade for LHC Run 3 and will collect data at an interaction rate 50 times larger than before. The new computing scheme for Run 3 replaces the traditionally separate online and offline frameworks by a unified one, which is called O2. Processing will happen in two phases. During data taking, a synchronous processing phase performs data compression, calibration, and quality control on the online computing farm. The output is stored on an onsite disk buffer. When there is no beam in the LHC, the same computing farm is used for the asynchronous reprocessing of the data which yields the final reconstruction output. The O2 project consists of three main parts:. The Event Processing Nodes (EPN) equipped with GPUs deliver the bulk of the computing capacity and perform the majority of the reconstruction and the calibration. The First Level Processors (FLP) receive the data via optical links from the detectors and perform local processing where it is needed, which can optionally happen in the user logic of the FPGA based readout card. Between the FLP and the EPN farms the data is distributed in the network such that the EPNs receive complete collision data for the processing. The Physics and Data Processing (PDP) group develops the software framework and the reconstruction and calibration algorithms. The current O2 setup is capable of handling in real time the peak data rate foreseen for data taking of Pb--Pb collisions at 50 kHz interaction rate..
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
Usage of GPUs in ALICE Online and Offline processing during LHC Run 3
Authors:
David Rohr
Abstract:
ALICE will significantly increase its Pb--Pb data taking rate from the 1\,kHz of triggered readout in Run 2 to 50 kHz of continuous readout for LHC Run 3. Updated tracking detectors are installed for Run 3 and a new two-phase computing strategy is employed. In the first synchronous phase during the data taking, the raw data is compressed for storage to an on-site disk buffer and the required data…
▽ More
ALICE will significantly increase its Pb--Pb data taking rate from the 1\,kHz of triggered readout in Run 2 to 50 kHz of continuous readout for LHC Run 3. Updated tracking detectors are installed for Run 3 and a new two-phase computing strategy is employed. In the first synchronous phase during the data taking, the raw data is compressed for storage to an on-site disk buffer and the required data for the detector calibration is collected. In the second asynchronous phase the compressed raw data is reprocessed using the final calibration to produce the final reconstruction output. Traditional CPUs are unable to cope with the huge data rate and processing demands of the synchronous phase, therefore ALICE employs GPUs to speed up the processing. Since the online computing farm performs a part of the asynchronous processing when there is no beam in the LHC, ALICE plans to use the GPUs also for this second phase. This paper gives an overview of the GPU processing in the synchronous phase, the full system test to validate the reference GPU architecture, and the prospects for the GPU usage in the asynchronous phase.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
ALICE : online-offline processing for Run 3
Authors:
David Rohr
Abstract:
ALICE will increase the data-taking rate for Run 3 significantly to 50 kHz continuous readout of minimum bias Pb--Pb collisions. The foreseen reconstruction strategy consists of 2 phases: a first synchronous online reconstruction stage during data-taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. The main challenges include processing and compressi…
▽ More
ALICE will increase the data-taking rate for Run 3 significantly to 50 kHz continuous readout of minimum bias Pb--Pb collisions. The foreseen reconstruction strategy consists of 2 phases: a first synchronous online reconstruction stage during data-taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. The main challenges include processing and compression of 50 times more events per second than in Run 2, sophisticated compression and removal of TPC data not use for physics, tracking of TPC data in continuous readout, the TPC space-charge distortion calibrations, and in general running more reconstruction steps online compared to Run 2. ALICE will leverage GPUs to facilitate the synchronous processing with the available resources. In order to achieve the best utilization of the computing farm, we plan to offload also several steps of the asynchronous reconstruction to the GPU. This paper gives an overview of the important processing steps during synchronous and asynchronous reconstruction and of the required computing capabilities.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
Overview of online and offline reconstruction in ALICE for LHC Run 3
Authors:
David Rohr
Abstract:
In LHC Run 3, ALICE will increase the data taking rate significantly to 50 kHz continuous readout of minimum bias Pb--Pb collisions. The reconstruction strategy of the online-offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. The main challenges include pr…
▽ More
In LHC Run 3, ALICE will increase the data taking rate significantly to 50 kHz continuous readout of minimum bias Pb--Pb collisions. The reconstruction strategy of the online-offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. The main challenges include processing and compression of 50 times more events per second than in Run 2, identification of removable TPC tracks and hits not used for physics, tracking of TPC data in continuous readout, the TPC space-charge distortion calibrations, and in general running more reconstruction steps online compared to Run 2. ALICE will leverage GPUs to facilitate the synchronous processing with the available resources. For the best GPU resource utilization, we plan to offload also several steps of the asynchronous reconstruction to the GPU. In order to be vendor independent, we support CUDA, OpenCL, and HIP, and we maintain a common C++ source code that also runs on the CPU. We will give an overview of the global reconstruction and tracking strategy, a comparison of the performance on CPU and different GPU models. We will discuss the scaling of the reconstruction with the input data size, as well as estimates of the required resources in terms of memory and processing power.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
GPU-based reconstruction and data compression at ALICE during LHC Run 3
Authors:
David Rohr
Abstract:
In LHC Run 3, ALICE will increase the data taking rate significantly to 50 kHz continuous read out of minimum bias Pb-Pb collisions. The reconstruction strategy of the online offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. The significant increase in th…
▽ More
In LHC Run 3, ALICE will increase the data taking rate significantly to 50 kHz continuous read out of minimum bias Pb-Pb collisions. The reconstruction strategy of the online offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. The significant increase in the data rate poses challenges for online and offline reconstruction as well as for data compression. Compared to Run 2, the online farm must process 50 times more events per second and achieve a higher data compression factor. ALICE will rely on GPUs to perform real time processing and data compression of the Time Projection Chamber (TPC) detector in real time, the biggest contributor to the data rate. With GPUs available in the online farm, we are evaluating their usage also for the full tracking chain during the asynchronous reconstruction for the silicon Inner Tracking System (ITS) and Transition Radiation Detector (TRD). The software is written in a generic way, such that it can also run on processors on the WLCG with the same reconstruction output. We give an overview of the status and the current performance of the reconstruction and the data compression implementations on the GPU for the TPC and for the global reconstruction.
△ Less
Submitted 7 June, 2020;
originally announced June 2020.
-
LQR-Assisted Whole-Body Control of a Wheeled Bipedal Robot with Kinematic Loops
Authors:
Victor Klemm,
Alessandro Morra,
Lionel Gulich,
Dominik Mannhart,
David Rohr,
Mina Kamel,
Yvain de Viragh,
Roland Siegwart
Abstract:
We present a hierarchical whole-body controller leveraging the full rigid body dynamics of the wheeled bipedal robot Ascento. We derive closed-form expressions for the dynamics of its kinematic loops in a way that readily generalizes to more complex systems. The rolling constraint is incorporated using a compact analytic solution based on rotation matrices. The non-minimum phase balancing dynamics…
▽ More
We present a hierarchical whole-body controller leveraging the full rigid body dynamics of the wheeled bipedal robot Ascento. We derive closed-form expressions for the dynamics of its kinematic loops in a way that readily generalizes to more complex systems. The rolling constraint is incorporated using a compact analytic solution based on rotation matrices. The non-minimum phase balancing dynamics are accounted for by including a linear-quadratic regulator as a motion task. Robustness when driving curves is increased by regulating the lean angle as a function of the zero-moment point. The proposed controller is computationally lightweight and significantly extends the rough-terrain capabilities and robustness of the system, as we demonstrate in several experiments.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
Global Track Reconstruction and Data Compression Strategy in ALICE for LHC Run 3
Authors:
David Rohr
Abstract:
In LHC Run 3, ALICE will increase the data taking rate significantly, from an approximately 1 kHz trigger readout in minimum-bias Pb--Pb collisions to a 50 kHz continuous readout rate. The reconstruction strategy of the online-offline computing upgrade foresees a synchronous online reconstruction stage during data taking, which generates the detector calibration, and a posterior calibrated asynchr…
▽ More
In LHC Run 3, ALICE will increase the data taking rate significantly, from an approximately 1 kHz trigger readout in minimum-bias Pb--Pb collisions to a 50 kHz continuous readout rate. The reconstruction strategy of the online-offline computing upgrade foresees a synchronous online reconstruction stage during data taking, which generates the detector calibration, and a posterior calibrated asynchronous reconstruction stage. The huge amount of data requires a significant compression in order to store all recorded events. The aim is a factor 20 compression of the TPC data, which is one of the main challenges during synchronous reconstruction. In addition, the reconstruction will run online, processing 50 times more collisions than at present, yielding results comparable to current offline reconstruction. These requirements pose new challenges for the tracking, including the continuous TPC readout, more overlap** collisions, no a priori knowledge of the primary vertex position and of location-dependent calibration during the synchronous phase, identification of low-momentum loo** tracks, and a distorted refit to improve track model entropy coding. At the 2018 workshop, the TPC tracking for Run 3 was presented, which matches the physics performance of the Run 2 offline tracking. It leverages the potential of hardware accelerators via the OpenCL and CUDA APIs in a shared source code for CPUs and GPUs for both reconstruction stages. Porting more reconstruction steps like the remainder of the TPC reconstruction and tracking for other detectors to GPU will shift the computing balance from traditional processors towards GPUs. These proceedings focus on the global tracking strategy, including the ITS and TRD detectors, offloading more reconstruction steps onto GPU, and the approaches taken to achieve the necessary data compression.
△ Less
Submitted 27 October, 2019;
originally announced October 2019.
-
GPU-based Online Track Reconstruction for the ALICE TPC in Run 3 with Continuous Read-Out
Authors:
David Rohr,
Sergey Gorbunov,
Marten Ole Schmidt,
Ruben Shahoyan
Abstract:
In LHC Run 3, ALICE will increase the data taking rate significantly to 50 kHz continuous read-out of minimum bias Pb-Pb collisions. The reconstruction strategy of the online-offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration and data compression, and a posterior calibrated asynchronous reconstruction stage. Many new…
▽ More
In LHC Run 3, ALICE will increase the data taking rate significantly to 50 kHz continuous read-out of minimum bias Pb-Pb collisions. The reconstruction strategy of the online-offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration and data compression, and a posterior calibrated asynchronous reconstruction stage. Many new challenges arise, among them continuous TPC read-out, more overlap** collisions, no a priori knowledge of the primary vertex and of location-dependent calibration in the synchronous phase, identification of low-momentum loo** tracks, and sophisticated raw data compression. The tracking algorithm for the Time Projection Chamber (TPC) will be based on a Cellular Automaton and the Kalman filter. The reconstruction shall run online, processing 50 times more collisions per second than today, while yielding results comparable to current offline reconstruction. Our TPC track finding leverages the potential of hardware accelerators via the OpenCL and CUDA APIs in a shared source code for CPUs and GPUs for both reconstruction stages. We give an overview of the status of Run 3 tracking including performance on processors and GPUs and achieved compression ratios.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
Attitude- and Cruise Control of a VTOL Tiltwing UAV
Authors:
David Rohr,
Thomas Stastny,
Sebastian Verling,
Roland Siegwart
Abstract:
This paper presents the mathematical modeling, controller design, and flight-testing of an over-actuated Vertical Take-off and Landing (VTOL) tiltwing Unmanned Aerial Vehicle (UAV). Based on simplified aerodynamics and first-principles, a dynamical model of the UAV is developed which captures key aerodynamic effects including propeller slipstream on the wing and post-stall characteristics of the a…
▽ More
This paper presents the mathematical modeling, controller design, and flight-testing of an over-actuated Vertical Take-off and Landing (VTOL) tiltwing Unmanned Aerial Vehicle (UAV). Based on simplified aerodynamics and first-principles, a dynamical model of the UAV is developed which captures key aerodynamic effects including propeller slipstream on the wing and post-stall characteristics of the airfoils. The model-based steady-state flight envelope and the corresponding trim-actuation is analyzed and the overactuation of the UAV solved by optimizing for, e.g., power-optimal trims. The developed control system is composed of two controllers: First, a low-level attitude controller based on dynamic inversion and a daisy-chaining approach to handle allocation of redundant actuators. Secondly, a higher-level cruise controller to track a desired vertical velocity. It is based on a linearization of the system and look-up tables to determine the strong and nonlinear variation of the trims throughout the flight-envelope. We demonstrate the performance of the control-system for all flight phases (hover, transition, cruise) in extensive flight-tests.
△ Less
Submitted 4 May, 2019; v1 submitted 25 March, 2019;
originally announced March 2019.
-
The Green Bank North Celestial Cap Pulsar Survey. IV: Four New Timing Solutions
Authors:
R. J. Aloisi,
A. Cruz,
L. Daniels,
N. Meyers,
R. Roekle,
A. Schuett,
J. K. Swiggum,
M. E. DeCesar,
D. L. Kaplan,
R. S. Lynch,
K. Stovall,
Lina Levin,
A. M. Archibald,
S. Banaszak,
C. M. Biwer,
J. Boyles,
P. Chawla,
L. P. Dartez,
B. Cui,
D. F. Day,
A. J. Ford,
J. Flanigan,
E. Fonseca,
J. W. T. Hessels,
J. Hinojosa
, et al. (18 additional authors not shown)
Abstract:
We present timing solutions for four pulsars discovered in the Green Bank Northern Celestial Cap (GBNCC) survey. All four pulsars are isolated with spin periods between 0.26$\,$s and 1.84$\,$s. PSR J0038$-$2501 has a 0.26$\,$s period and a period derivative of ${7.6} \times {10}^{-19}\,{\rm s\,s}^{-1}$, which is unusually low for isolated pulsars with similar periods. This low period derivative ma…
▽ More
We present timing solutions for four pulsars discovered in the Green Bank Northern Celestial Cap (GBNCC) survey. All four pulsars are isolated with spin periods between 0.26$\,$s and 1.84$\,$s. PSR J0038$-$2501 has a 0.26$\,$s period and a period derivative of ${7.6} \times {10}^{-19}\,{\rm s\,s}^{-1}$, which is unusually low for isolated pulsars with similar periods. This low period derivative may be simply an extreme value for an isolated pulsar or it could indicate an unusual evolution path for PSR J0038$-$2501, such as a disrupted recycled pulsar (DRP) from a binary system or an orphaned central compact object (CCO). Correcting the observed spin-down rate for the Shklovskii effect suggests that this pulsar may have an unusually low space velocity, which is consistent with expectations for DRPs. There is no X-ray emission detected from PSR J0038$-$2501 in an archival swift observation, which suggests that it is not a young orphaned CCO. The high dispersion measure of PSR J1949+3426 suggests a distance of 12.3$\,$kpc. This distance indicates that PSR J1949+3426 is among the most distant 7% of Galactic field pulsars, and is one of the most luminous pulsars.
△ Less
Submitted 8 March, 2019;
originally announced March 2019.
-
A next-generation LHC heavy-ion experiment
Authors:
D. Adamová,
G. Aglieri Rinella,
M. Agnello,
Z. Ahammed,
D. Aleksandrov,
A. Alici,
A. Alkin,
T. Alt,
I. Altsybeev,
D. Andreou,
A. Andronic,
F. Antinori,
P. Antonioli,
H. Appelshäuser,
R. Arnaldi,
I. C. Arsene,
M. Arslandok,
R. Averbeck,
M. D. Azmi,
X. Bai,
R. Bailhache,
R. Bala,
L. Barioglio,
G. G. Barnaföldi,
L. S. Barnby
, et al. (374 additional authors not shown)
Abstract:
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th…
▽ More
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.
△ Less
Submitted 2 May, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Data processing and online reconstruction
Authors:
David Rohr
Abstract:
In the upcoming upgrades for Run 3 and 4, the LHC will significantly increase Pb--Pb and pp interaction rates. This goes along with upgrades of all experiments, ALICE, ATLAS, CMS, and LHCb, related to both the detectors and the computing. The online processing farms must employ faster, more efficient reconstruction algorithms to cope with the increased data rates, and data compression factors must…
▽ More
In the upcoming upgrades for Run 3 and 4, the LHC will significantly increase Pb--Pb and pp interaction rates. This goes along with upgrades of all experiments, ALICE, ATLAS, CMS, and LHCb, related to both the detectors and the computing. The online processing farms must employ faster, more efficient reconstruction algorithms to cope with the increased data rates, and data compression factors must increase to fit the data in the affordable capacity for permanent storage. Due to different operating conditions and aims, the experiments follow different approaches, but there are several common trends like more extensive online computing and the adoption of hardware accelerators. This paper gives an overview and compares the data processing approaches and the online computing farms of the LHC experiments today in Run 2 and for the upcoming LHC Run 3 and 4.
△ Less
Submitted 28 November, 2018;
originally announced November 2018.
-
Track Reconstruction in the ALICE TPC using GPUs for LHC Run 3
Authors:
David Rohr,
Sergey Gorbunov,
Marten Ole Schmidt,
Ruben Shahoyan
Abstract:
In LHC Run 3, ALICE will increase the data taking rate significantly to continuous readout of 50 kHz minimum bias Pb-Pb collisions. The reconstruction strategy of the online offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. We present a tracking algorithm…
▽ More
In LHC Run 3, ALICE will increase the data taking rate significantly to continuous readout of 50 kHz minimum bias Pb-Pb collisions. The reconstruction strategy of the online offline computing upgrade foresees a first synchronous online reconstruction stage during data taking enabling detector calibration, and a posterior calibrated asynchronous reconstruction stage. We present a tracking algorithm for the Time Projection Chamber (TPC), the main tracking detector of ALICE. The reconstruction must yield results comparable to current offline reconstruction and meet the time constraints like in the current High Level Trigger (HLT), processing 50 times as many collisions per second as today. It is derived from the current online tracking in the HLT, which is based on a Cellular automaton and the Kalman filter, and we integrate missing features from offline tracking for improved resolution. The continuous TPC readout and overlap** collisions pose new challenges: conversion to spatial coordinates and the application of time- and location dependent calibration must happen in between of track seeding and track fitting while the TPC occupancy increases five-fold. The huge data volume requires a data reduction factor of 20, which imposes additional requirements: the momentum range must be extended to identify low-pt loo** tracks and a special refit in uncalibrated coordinates improves the track model entropy encoding. Our TPC track finding leverages the potential of hardware accelerators via the OpenCL and CUDA APIs in a shared source code for CPUs, GPUs, and both reconstruction stages. Porting more reconstruction steps like the remainder of the TPC reconstruction and tracking for other detectors will shift the computing balance from traditional processors to GPUs.
△ Less
Submitted 28 November, 2018;
originally announced November 2018.
-
The L-CSC cluster: Optimizing power efficiency to become the greenest supercomputer in the world in the Green500 list of November 2014
Authors:
David Rohr,
Gvozden Neskovic,
Volker Lindenstruth
Abstract:
The L-CSC (Lattice Computer for Scientific Computing) is a general purpose compute cluster built with commodity hardware installed at GSI. Its main operational purpose is Lattice QCD (LQCD) calculations for physics simulations. Quantum Chromo Dynamics (QCD) is the physical theory describing the strong force, one of the four known fundamental interactions in the universe. L-CSC leverages a multi-GP…
▽ More
The L-CSC (Lattice Computer for Scientific Computing) is a general purpose compute cluster built with commodity hardware installed at GSI. Its main operational purpose is Lattice QCD (LQCD) calculations for physics simulations. Quantum Chromo Dynamics (QCD) is the physical theory describing the strong force, one of the four known fundamental interactions in the universe. L-CSC leverages a multi-GPU design accommodating the huge demand of LQCD for memory bandwidth. In recent years, heterogeneous clusters with accelerators such as GPUs have become more and more powerful while supercomputers in general have shown enormous increases in power consumption making electricity costs and cooling a significant factor in the total cost of ownership. Using mainly GPUs for processing, L-CSC is very power-efficient, and its architecture was optimized to provide the greatest possible power efficiency. This paper presents the cluster design as well as optimizations to improve the power efficiency. It examines the power measurements performed for the Green500 list of the most power-efficient supercomputers in the world which led to the number 1 position as the greenest supercomputer in November 2014.
△ Less
Submitted 28 November, 2018;
originally announced November 2018.
-
The Green Bank North Celestial Cap Pulsar Survey III: 45 New Pulsar Timing Solutions
Authors:
Ryan S. Lynch,
Joseph K. Swiggum,
Vlad I. Kondratiev,
David L. Kaplan,
Kevin Stovall,
Emmanuel Fonseca,
Mallory S. E. Roberts,
Lina Levin,
Megan E. DeCesar,
Bingyi Cui,
S. Bradley Cenko,
Pradip Gatkine,
Anne M. Archibald,
Shawn Banaszak,
Christopher M. Biwer,
Jason Boyles,
Pragya Chawla,
Louis P. Dartez,
David Day,
Anthony J. Ford,
Joseph Flanigan,
Jason W. T. Hessels,
Jesus Hinojosa,
Fredrick A. Jenet,
Chen Karako-Argaman
, et al. (15 additional authors not shown)
Abstract:
We provide timing solutions for 45 radio pulsars discovered by the Robert C. Byrd Green Bank Telescope. These pulsars were found in the Green Bank North Celestial Cap pulsar survey, an all-GBT-sky survey being carried out at a frequency of 350 MHz. We include pulsar timing data from the Green Bank Telescope and Low Frequency Array. Our sample includes five fully recycled millisecond pulsars (MSPs,…
▽ More
We provide timing solutions for 45 radio pulsars discovered by the Robert C. Byrd Green Bank Telescope. These pulsars were found in the Green Bank North Celestial Cap pulsar survey, an all-GBT-sky survey being carried out at a frequency of 350 MHz. We include pulsar timing data from the Green Bank Telescope and Low Frequency Array. Our sample includes five fully recycled millisecond pulsars (MSPs, three of which are in a binary system), a new relativistic double neutron star system, an intermediate mass binary pulsar, a mode-changing pulsar, a 138-ms pulsar with a very low magnetic field, and several nulling pulsars. We have measured two post-Keplerian parameters and thus the masses of both objects in the double neutron star system. We also report a tentative companion mass measurement via Shapiro delay in a binary MSP. Two of the MSPs can be timed with high precision and have been included in pulsar timing arrays being used to search for low-frequency gravitational waves, while a third MSP is a member of the black widow class of binaries. Proper motion is measurable in five pulsars and we provide an estimate of their space velocity. We report on an optical counterpart to a new black widow system and provide constraints on the optical counterparts to other binary MSPs. We also present a preliminary analysis of nulling pulsars in our sample. These results demonstrate the scientific return of long timing campaigns on pulsars of all types.
△ Less
Submitted 13 May, 2018;
originally announced May 2018.
-
The Green Bank Northern Celestial Cap Pulsar Survey II: The Discovery and Timing of Ten Pulsars
Authors:
A. M. Kawash,
M. A. McLaughlin,
D. L. Kaplan,
M. E. DeCesar,
L. Levin,
D. R. Lorimer,
R. S. Lynch,
K. Stovall,
J. K. Swiggum,
E. Fonseca,
A. M. Archibald,
S. Banaszak,
C. M. Biwer,
J. Boyles,
B. Cui,
L. P. Dartez,
D. Day,
S. Ernst,
A. J. Ford,
J. Flanigan,
S. A. Heatherly,
J. W. T. Hessels,
J. Hinojosa,
F. A. Jenet,
C. Karako-Argaman
, et al. (19 additional authors not shown)
Abstract:
We present timing solutions for ten pulsars discovered in 350 MHz searches with the Green Bank Telescope. Nine of these were discovered in the Green Bank Northern Celestial Cap survey and one was discovered by students in the Pulsar Search Collaboratory program in analysis of drift-scan data. Following discovery and confirmation with the Green Bank Telescope, timing has yielded phase-connected sol…
▽ More
We present timing solutions for ten pulsars discovered in 350 MHz searches with the Green Bank Telescope. Nine of these were discovered in the Green Bank Northern Celestial Cap survey and one was discovered by students in the Pulsar Search Collaboratory program in analysis of drift-scan data. Following discovery and confirmation with the Green Bank Telescope, timing has yielded phase-connected solutions with high precision measurements of rotational and astrometric parameters. Eight of the pulsars are slow and isolated, including PSR J0930$-$2301, a pulsar with nulling fraction lower limit of $\sim$30\% and nulling timescale of seconds to minutes. This pulsar also shows evidence of mode changing. The remaining two pulsars have undergone recycling, accreting material from binary companions, resulting in higher spin frequencies. PSR J0557$-$2948 is an isolated, 44 \rm{ms} pulsar that has been partially recycled and is likely a former member of a binary system which was disrupted by a second supernova. The paucity of such so-called `disrupted binary pulsars' (DRPs) compared to double neutron star (DNS) binaries can be used to test current evolutionary scenarios, especially the kicks imparted on the neutron stars in the second supernova. There is some evidence that DRPs have larger space velocities, which could explain their small numbers. PSR J1806+2819 is a 15 \rm{ms} pulsar in a 44 day orbit with a low mass white dwarf companion. We did not detect the companion in archival optical data, indicating that it must be older than 1200 Myr.
△ Less
Submitted 9 March, 2018;
originally announced March 2018.
-
Online Reconstruction and Calibration with feed back loop in the ALICE High Level Trigger
Authors:
David Rohr,
Ruben Shahoyan,
Chiara Zampolli,
Mikolaj Krzewicki,
Jens Wiechula,
Sergey Gorbunov,
Alex Chauvin,
Kai Schweda,
Volker Lindenstruth
Abstract:
ALICE (A Large Heavy Ion Experiment) is one of the four large scale experiments at the Large Hadron Collider (LHC) at CERN. The High Level Trigger (HLT) is an online computing farm, which reconstructs events recorded by the ALICE detector in real-time. The most compute-intense task is the reconstruction of the particle trajectories. The main tracking devices in ALICE are the Time Projection Chambe…
▽ More
ALICE (A Large Heavy Ion Experiment) is one of the four large scale experiments at the Large Hadron Collider (LHC) at CERN. The High Level Trigger (HLT) is an online computing farm, which reconstructs events recorded by the ALICE detector in real-time. The most compute-intense task is the reconstruction of the particle trajectories. The main tracking devices in ALICE are the Time Projection Chamber (TPC) and the Inner Tracking System (ITS). The HLT uses a fast GPU-accelerated algorithm for the TPC tracking based on the Cellular Automaton principle and the Kalman filter. ALICE employs gaseous subdetectors which are sensitive to environmental conditions such as ambient pressure and temperature and the TPC is one of these. A precise reconstruction of particle trajectories requires the calibration of these detectors. As first topic, we present some recent optimizations to our GPU-based TPC tracking using the new GPU models we employ for the ongoing and upcoming data taking period at LHC. We also show our new approach for fast ITS standalone tracking. As second topic, we present improvements to the HLT for facilitating online reconstruction including a new flat data model and a new data flow chain. The calibration output is fed back to the reconstruction components of the HLT via a feedback loop. We conclude with an analysis of a first online calibration test under real conditions during the Pb-Pb run in November 2015, which was based on these new features.
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
-
The L-CSC cluster: greenest supercomputer in the world in Green500 list of November 2014
Authors:
D. Rohr,
G. Neskovic,
M. Radtke,
V. Lindenstruth
Abstract:
The L-CSC (Lattice Computer for Scientific Computing) is a general purpose compute cluster built of commodity hardware installed at GSI. Its main operational purpose is Lattice QCD (LQCD) calculations for physics simulations. Quantum Chromo Dynamics (QCD) is the physical theory describing the strong force, one of the four known fundamental interactions in the universe. L-CSC leverages a multi-GPU…
▽ More
The L-CSC (Lattice Computer for Scientific Computing) is a general purpose compute cluster built of commodity hardware installed at GSI. Its main operational purpose is Lattice QCD (LQCD) calculations for physics simulations. Quantum Chromo Dynamics (QCD) is the physical theory describing the strong force, one of the four known fundamental interactions in the universe. L-CSC leverages a multi-GPU design accommodating the huge demand of LQCD for memory bandwidth. In recent years, heterogeneous clusters with accelerators such as GPUs have become more and more powerful while supercomputers in general have shown enormous increases in power consumption making electricity costs and cooling a significant factor in the total cost of ownership. Using mainly GPUs for processing, L-CSC is very power efficient, and its architecture was optimized to provide the greatest possible power efficiency. This paper presents the cluster design as well as optimizations to improve the power efficiency. It examines the power measurements performed for the Green500 list of the most power efficient supercomputers in the world which led to the number 1 position as the greenest supercomputer in November 2014.
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
-
GPU-accelerated track reconstruction in the ALICE High Level Trigger
Authors:
David Rohr,
Sergey Gorbunov,
Volker Lindenstruth
Abstract:
ALICE (A Large Heavy Ion Experiment) is one of the four major experiments at the Large Hadron Collider (LHC) at CERN. The High Level Trigger (HLT) is an online compute farm which reconstructs events measured by the ALICE detector in real-time. The most compute-intensive part is the reconstruction of particle trajectories called tracking and the most important detector for tracking is the Time Proj…
▽ More
ALICE (A Large Heavy Ion Experiment) is one of the four major experiments at the Large Hadron Collider (LHC) at CERN. The High Level Trigger (HLT) is an online compute farm which reconstructs events measured by the ALICE detector in real-time. The most compute-intensive part is the reconstruction of particle trajectories called tracking and the most important detector for tracking is the Time Projection Chamber (TPC). The HLT uses a GPU-accelerated algorithm for TPC tracking that is based on the Cellular Automaton principle and on the Kalman filter. The GPU tracking has been running in 24/7 operation since 2012 in LHC Run 1 and 2. In order to better leverage the potential of the GPUs, and speed up the overall HLT reconstruction, we plan to bring more reconstruction steps (e.g. the tracking for other detectors) onto the GPUs. There are several tasks running so far on the CPU that could benefit from cooperation with the tracking, which is hardly feasible at the moment due to the delay of the PCI Express transfers. Moving more steps onto the GPU, and processing them on the GPU at once, will reduce PCI Express transfers and free up CPU resources. On top of that, modern GPUs and GPU programming APIs provide new features which are not yet exploited by the TPC tracking. We present our new developments for GPU reconstruction, both with a focus on the online reconstruction on GPU for the online offline computing upgrade in ALICE during LHC Run 3, and also taking into account how the current HLT in Run 2 can profit from these improvements.
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
-
Improvements of the ALICE HLT data transport framework for LHC Run 2
Authors:
David Rohr,
Mikolaj Krzwicki,
Heiko Engel,
Johannes Lehrbach,
Volker Lindenstruth
Abstract:
The ALICE HLT uses a data transport framework based on the publisher-subscriber message principle, which transparently handles the communication between processing components over the network and between processing components on the same node via shared memory with a zero copy approach. We present an analysis of the performance in terms of maximum achievable data rates and event rates as well as p…
▽ More
The ALICE HLT uses a data transport framework based on the publisher-subscriber message principle, which transparently handles the communication between processing components over the network and between processing components on the same node via shared memory with a zero copy approach. We present an analysis of the performance in terms of maximum achievable data rates and event rates as well as processing capabilities during Run 1 and Run 2. Based on this analysis, we present new optimizations we have developed for ALICE in Run 2. These include support for asynchronous transport via Zero-MQ which enables loops in the reconstruction chain graph and which is used to ship QA histograms to DQM. We have added asynchronous processing capabilities in order to support long-running tasks besides the event-synchronous reconstruction tasks in normal HLT operation. These asynchronous components run in an isolated process such that the HLT as a whole is resilient even to fatal errors in these asynchronous components. In this way, we can ensure that new developments cannot break data taking. On top of that, we have tuned the processing chain to cope with the higher event and data rates expected from the new TPC readout electronics (RCU2) and we have improved the configuration procedure and the startup time in order to increase the time where ALICE can take physics data. We analyze the maximum achievable data processing rates taking into account processing capabilities of CPUs and GPUs, buffer sizes, network bandwidth, the incoming links from the detectors, and the outgoing links to data acquisition.
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
-
Online Calibration of the TPC Drift Time in the ALICE High Level Trigger
Authors:
David Rohr,
Mikolaj Krzewicki,
Chiara Zampolli,
Jens Wiechula,
Sergey Gorbunov,
Alex Chauvin,
Ivan Vorobyev,
Steffen Weber,
Kai Schweda,
Volker Lindenstruth
Abstract:
ALICE (A Large Ion Collider Experiment) is one of four major experiments at the Large Hadron Collider (LHC) at CERN. The High Level Trigger (HLT) is a compute cluster, which reconstructs collisions as recorded by the ALICE detector in real-time. It employs a custom online data-transport framework to distribute data and workload among the compute nodes.
ALICE employs subdetectors sensitive to env…
▽ More
ALICE (A Large Ion Collider Experiment) is one of four major experiments at the Large Hadron Collider (LHC) at CERN. The High Level Trigger (HLT) is a compute cluster, which reconstructs collisions as recorded by the ALICE detector in real-time. It employs a custom online data-transport framework to distribute data and workload among the compute nodes.
ALICE employs subdetectors sensitive to environmental conditions such as pressure and temperature, e.g. the Time Projection Chamber (TPC). A precise reconstruction of particle trajectories requires the calibration of these detectors. Performing the calibration in real time in the HLT improves the online reconstructions and renders certain offline calibration steps obsolete speeding up offline physics analysis. For LHC Run 3, starting in 2020 when data reduction will rely on reconstructed data, online calibration becomes a necessity. Reconstructed particle trajectories build the basis for the calibration making a fast online-tracking mandatory. The main detectors used for this purpose are the TPC and ITS (Inner Tracking System). Reconstructing the trajectories in the TPC is the most compute-intense step.
We present several improvements to the ALICE High Level Trigger developed to facilitate online calibration. The main new development for online calibration is a wrapper that can run ALICE offline analysis and calibration tasks inside the HLT. On top of that, we have added asynchronous processing capabilities to support long-running calibration tasks in the HLT framework, which runs event-synchronously otherwise. In order to improve the resiliency, an isolated process performs the asynchronous operations such that even a fatal error does not disturb data taking. We have complemented the original loop-free HLT chain with ZeroMQ data-transfer components. [...]
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
-
Fast TPC Online Tracking on GPUs and Asynchronous Data Processing in the ALICE HLT to facilitate Online Calibration
Authors:
David Rohr,
Sergey Gorbunov,
Mikolaj Krzewicki,
Timo Breitner,
Matthias Kretz,
Volker Lindenstruth
Abstract:
ALICE (A Large Heavy Ion Experiment) is one of the four major experiments at the Large Hadron Collider (LHC) at CERN, which is today the most powerful particle accelerator worldwide. The High Level Trigger (HLT) is an online compute farm of about 200 nodes, which reconstructs events measured by the ALICE detector in real-time. The HLT uses a custom online data-transport framework to distribute dat…
▽ More
ALICE (A Large Heavy Ion Experiment) is one of the four major experiments at the Large Hadron Collider (LHC) at CERN, which is today the most powerful particle accelerator worldwide. The High Level Trigger (HLT) is an online compute farm of about 200 nodes, which reconstructs events measured by the ALICE detector in real-time. The HLT uses a custom online data-transport framework to distribute data and workload among the compute nodes. ALICE employs several calibration-sensitive subdetectors, e.g. the TPC (Time Projection Chamber). For a precise reconstruction, the HLT has to perform the calibration online. Online-calibration can make certain Offline calibration steps obsolete and can thus speed up Offline analysis. Looking forward to ALICE Run III starting in 2020, online calibration becomes a necessity. The main detector used for track reconstruction is the TPC. Reconstructing the trajectories in the TPC is the most compute-intense step during event reconstruction. Therefore, a fast tracking implementation is of great importance. Reconstructed TPC tracks build the basis for the calibration making a fast online-tracking mandatory. We present several components developed for the ALICE High Level Trigger to perform fast event reconstruction and to provide features required for online calibration. As first topic, we present our TPC tracker, which employs GPUs to speed up the processing, and which bases on a Cellular Automaton and on the Kalman filter. Our TPC tracking algorithm has been successfully used in 2011 and 2012 in the lead-lead and the proton-lead runs. We have improved it to leverage features of newer GPUs and we have ported it to support OpenCL, CUDA, and CPUs with a single common source code. This makes us vendor independent. As second topic, we present framework extensions required for online calibration. ...
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
-
ALICE HLT TPC Tracking of Pb-Pb Events on GPUs
Authors:
David Rohr,
Sergey Gorbunov,
Artur Szostak,
Matthias Kretz,
Thorsten Kollegger,
Timo Breitner,
Torsten Alt
Abstract:
The online event reconstruction for the ALICE experiment at CERN requires processing capabilities to process central Pb-Pb collisions at a rate of more than 200 Hz, corresponding to an input data rate of about 25 GB/s. The reconstruction of particle trajectories in the Time Projection Chamber (TPC) is the most compute intensive step. The TPC online tracker implementation combines the principle of…
▽ More
The online event reconstruction for the ALICE experiment at CERN requires processing capabilities to process central Pb-Pb collisions at a rate of more than 200 Hz, corresponding to an input data rate of about 25 GB/s. The reconstruction of particle trajectories in the Time Projection Chamber (TPC) is the most compute intensive step. The TPC online tracker implementation combines the principle of the cellular automaton and the Kalman filter. It has been accelerated by the usage of graphics cards (GPUs). A pipelined processing allows to perform the tracking on the GPU, the data transfer, and the preprocessing on the CPU in parallel. In order for CPU pre- and postprocessing to keep step with the GPU the pipeline uses multiple threads. A splitting of the tracking in multiple phases searching for short local track segments first improves data locality and makes the algorithm suited to run on a GPU. Due to special optimizations this course of action is not second to a global approach. Because of non-associative floating-point arithmetic a binary comparison of GPU and CPU tracker is infeasible. A track by track and cluster by cluster comparison shows a concordance of 99.999%. With current hardware, the GPU tracker outperforms the CPU version by about a factor of three leaving the processor still available for other tasks.
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
-
Tracking performance in high multiplicities environment at ALICE
Authors:
David Rohr
Abstract:
In LHC Run 3, ALICE will increase the data taking rate significantly to 50\,kHz continuous read out of minimum bias Pb-Pb events. This challenges the online and offline computing infrastructure, requiring to process 50 times as many events per second as in Run 2, and increasing the data compression ratio from 5 to 20. Such high data compression is impossible by lossless ZIP-like algorithms, but it…
▽ More
In LHC Run 3, ALICE will increase the data taking rate significantly to 50\,kHz continuous read out of minimum bias Pb-Pb events. This challenges the online and offline computing infrastructure, requiring to process 50 times as many events per second as in Run 2, and increasing the data compression ratio from 5 to 20. Such high data compression is impossible by lossless ZIP-like algorithms, but it must use results from online reconstruction, which in turn requires online calibration. These important online processing steps are the most computing-intense ones, and will use GPUs as hardware accelerators. The new online features are already under test during Run 2 in the High Level Trigger (HLT) online processing farm. The TPC (Time Projection Chamber) tracking algorithm for Run 3 is derived from the current HLT online tracking and is based on the Cellular Automaton and Kalman Filter. HLT has deployed online calibration for the TPC drift time, which needs to be extended to space charge distortions calibration. This requires online reconstruction for additional detectors like TRD (Transition Radiation Detector) and TOF (Time Of Flight). We present prototypes of these developments, in particular a data compression algorithm that achieves a compression factor of~9 on Run 2 TPC data, and the efficiency of online TRD tracking. We give an outlook to the challenges of TPC tracking with continuous read out.
△ Less
Submitted 2 September, 2017;
originally announced September 2017.
-
BioEM: GPU-accelerated computing of Bayesian inference of electron microscopy images
Authors:
Pilar Cossio,
David Rohr,
Fabio Baruffa,
Markus Rampp,
Volker Lindenstruth,
Gerhard Hummer
Abstract:
In cryo-electron microscopy (EM), molecular structures are determined from large numbers of projection images of individual particles. To harness the full power of this single-molecule information, we use the Bayesian inference of EM (BioEM) formalism. By ranking structural models using posterior probabilities calculated for individual images, BioEM in principle addresses the challenge of working…
▽ More
In cryo-electron microscopy (EM), molecular structures are determined from large numbers of projection images of individual particles. To harness the full power of this single-molecule information, we use the Bayesian inference of EM (BioEM) formalism. By ranking structural models using posterior probabilities calculated for individual images, BioEM in principle addresses the challenge of working with highly dynamic or heterogeneous systems not easily handled in traditional EM reconstruction. However, the calculation of these posteriors for large numbers of particles and models is computationally demanding. Here we present highly parallelized, GPU-accelerated computer software that performs this task efficiently. Our flexible formulation employs CUDA, OpenMP, and MPI parallelization combined with both CPU and GPU computing. The resulting BioEM software scales nearly ideally both on pure CPU and on CPU+GPU architectures, thus enabling Bayesian analysis of tens of thousands of images in a reasonable time. The general mathematical framework and robust algorithms are not limited to cryo-electron microscopy but can be generalized for electron tomography and other imaging experiments.
△ Less
Submitted 21 September, 2016;
originally announced September 2016.
-
Search for transient gravitational waves in coincidence with short duration radio transients during 2007-2013
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
others,
:,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
M. R. Abernathy,
F. Acernese,
K. Ackley,
C. Adams,
T. Adams,
P. Addesso,
R. X. Adhikari,
V. B. Adya,
C. Affeldt,
M. Agathos,
K. Agatsuma,
N. Aggarwal,
O. D. Aguiar,
L. Aiello,
A. Ain,
P. Ajith,
B. Allen,
A. Allocca
, et al. (977 additional authors not shown)
Abstract:
We present an archival search for transient gravitational-wave bursts in coincidence with 27 single pulse triggers from Green Bank Telescope pulsar surveys, using the LIGO, Virgo and GEO interferometer network. We also discuss a check for gravitational-wave signals in coincidence with Parkes Fast Radio Bursts using similar methods. Data analyzed in these searches were collected between 2007 and 20…
▽ More
We present an archival search for transient gravitational-wave bursts in coincidence with 27 single pulse triggers from Green Bank Telescope pulsar surveys, using the LIGO, Virgo and GEO interferometer network. We also discuss a check for gravitational-wave signals in coincidence with Parkes Fast Radio Bursts using similar methods. Data analyzed in these searches were collected between 2007 and 2013. Possible sources of emission of both short-duration radio signals and transient gravitational-wave emission include starquakes on neutron stars, binary coalescence of neutron stars, and cosmic string cusps. While no evidence for gravitational-wave emission in coincidence with these radio transients was found, the current analysis serves as a prototype for similar future searches using more sensitive second-generation interferometers.
△ Less
Submitted 21 June, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Static correlation and electron localization in molecular dimers from the self-consistent RPA and GW approximation
Authors:
Maria Hellgren,
Fabio Caruso,
Daniel R. Rohr,
Xinguo Ren,
Angel Rubio,
Matthias Scheffler,
Patrick Rinke
Abstract:
We investigate static correlation and delocalization errors in the self-consistent GW and random-phase approximation (RPA) by studying molecular dissociation of the H_2 and LiH molecules. Although both approximations contain topologically identical diagrams, the non-locality and frequency dependence of the GW self-energy crucially influence the different energy contributions to the total energy as…
▽ More
We investigate static correlation and delocalization errors in the self-consistent GW and random-phase approximation (RPA) by studying molecular dissociation of the H_2 and LiH molecules. Although both approximations contain topologically identical diagrams, the non-locality and frequency dependence of the GW self-energy crucially influence the different energy contributions to the total energy as compared to the use of a static local potential in the RPA. The latter leads to significantly larger correlation energies which allow for a better description of static correlation at intermediate bond distances. The substantial error found in GW is further analyzed by comparing spin-restricted and spin-unrestricted calculations. At large but finite nuclear separation their difference gives an estimate of the so-called fractional spin error normally determined only in the dissociation limit. Furthermore, a calculation of the dipole moment of the LiH molecule at dissociation reveals a large delocalization error in GW making the fractional charge error comparable to the RPA. The analyses are supplemented by explicit formulae for the GW Green's function and total energy of a simplified two-level model providing additional insights into the dissociation limit.
△ Less
Submitted 9 April, 2015; v1 submitted 23 December, 2014;
originally announced December 2014.
-
The Green Bank Northern Celestial Cap Pulsar Survey - I: Survey Description, Data Analysis, and Initial Results
Authors:
K. Stovall,
R. S. Lynch,
S. M. Ransom,
A. M. Archibald,
S. Banaszak,
C. M. Biwer,
J. Boyles,
L. P. Dartez,
D. Day,
A. J. Ford,
J. Flanigan,
A. Garcia,
J. W. T. Hessels,
J. Hinojosa,
F. A. Jenet,
D. L. Kaplan,
C. Karako-Argaman,
V. M. Kaspi,
V. I. Kondratiev,
S. Leake,
D. R. Lorimer,
G. Lunsford,
J. G. Martinez,
A. Mata,
M. A. McLaughlin
, et al. (7 additional authors not shown)
Abstract:
We describe an ongoing search for pulsars and dispersed pulses of radio emission, such as those from rotating radio transients (RRATs) and fast radio bursts (FRBs), at 350 MHz using the Green Bank Telescope. With the Green Bank Ultimate Pulsar Processing Instrument, we record 100 MHz of bandwidth divided into 4,096 channels every 81.92 $μs$. This survey will cover the entire sky visible to the Gre…
▽ More
We describe an ongoing search for pulsars and dispersed pulses of radio emission, such as those from rotating radio transients (RRATs) and fast radio bursts (FRBs), at 350 MHz using the Green Bank Telescope. With the Green Bank Ultimate Pulsar Processing Instrument, we record 100 MHz of bandwidth divided into 4,096 channels every 81.92 $μs$. This survey will cover the entire sky visible to the Green Bank Telescope ($δ> -40^\circ$, or 82% of the sky) and outside of the Galactic Plane will be sensitive enough to detect slow pulsars and low dispersion measure ($<$30 $\mathrm{pc\,cm^{-3}}$) millisecond pulsars (MSPs) with a 0.08 duty cycle down to 1.1 mJy. For pulsars with a spectral index of $-$1.6, we will be 2.5 times more sensitive than previous and ongoing surveys over much of our survey region. Here we describe the survey, the data analysis pipeline, initial discovery parameters for 62 pulsars, and timing solutions for 5 new pulsars. PSR J0214$+$5222 is an MSP in a long-period (512 days) orbit and has an optical counterpart identified in archival data. PSR J0636$+$5129 is an MSP in a very short-period (96 minutes) orbit with a very low mass companion (8 $M_\mathrm{J}$). PSR J0645$+$5158 is an isolated MSP with a timing residual RMS of 500 ns and has been added to pulsar timing array experiments. PSR J1434$+$7257 is an isolated, intermediate-period pulsar that has been partially recycled. PSR J1816$+$4510 is an eclipsing MSP in a short-period orbit (8.7 hours) and may have recently completed its spin-up phase.
△ Less
Submitted 19 June, 2014;
originally announced June 2014.
-
Searching for pulsars using image pattern recognition
Authors:
W. W. Zhu,
A. Berndsen,
E. C. Madsen,
M. Tan,
I. H. Stairs,
A. Brazier,
P. Lazarus,
R. Lynch,
P. Scholz,
K. Stovall,
S. M. Ransom,
S. Banaszak,
C. M. Biwer,
S. Cohen,
L. P. Dartez,
J. Flanigan,
G. Lunsford,
J. G. Martinez,
A. Mata,
M. Rohr,
A. Walker,
B. Allen,
N. D. R. Bhat,
S. Bogdanov,
F. Camilo
, et al. (19 additional authors not shown)
Abstract:
In this paper, we present a novel artificial intelligence (AI) program that identifies pulsars from recent surveys using image pattern recognition with deep neural nets---the PICS (Pulsar Image-based Classification System) AI. The AI mimics human experts and distinguishes pulsars from noise and interferences by looking for patterns from candidate. The information from each pulsar candidate is synt…
▽ More
In this paper, we present a novel artificial intelligence (AI) program that identifies pulsars from recent surveys using image pattern recognition with deep neural nets---the PICS (Pulsar Image-based Classification System) AI. The AI mimics human experts and distinguishes pulsars from noise and interferences by looking for patterns from candidate. The information from each pulsar candidate is synthesized in four diagnostic plots, which consist of up to thousands pixel of image data. The AI takes these data from each candidate as its input and uses thousands of such candidates to train its ~9000 neurons. Different from other pulsar selection programs which use pre-designed patterns, the PICS AI teaches itself the salient features of different pulsars from a set of human-labeled candidates through machine learning. The deep neural networks in this AI system grant it superior ability in recognizing various types of pulsars as well as their harmonic signals. The trained AI's performance has been validated with a large set of candidates different from the training set. In this completely independent test, PICS ranked 264 out of 277 pulsar-related candidates, including all 56 previously known pulsars, to the top 961 (1%) of 90008 test candidates, missing only 13 harmonics. The first non-pulsar candidate appears at rank 187, following 45 pulsars and 141 harmonics. In other words, 100% of the pulsars were ranked in the top 1% of all candidates, while 80% were ranked higher than any noise or interference. The performance of this system can be improved over time as more training data are accumulated. This AI system has been integrated into the PALFA survey pipeline and has discovered six new pulsars to date.
△ Less
Submitted 17 December, 2013; v1 submitted 3 September, 2013;
originally announced September 2013.
-
PEACE: Pulsar Evaluation Algorithm for Candidate Extraction -- A software package for post-analysis processing of pulsar survey candidates
Authors:
K. J. Lee,
K. Stovall,
F. A. Jenet,
J. Martinez,
L. P. Dartez,
A. Mata,
G. Lunsford,
S. Cohen,
C. . M. Biwer,
M. Rohr,
J. Flanigan,
A. Walker,
S. Banaszak,
B. Allen,
E. D. Barr,
N. D. R. Bhat,
S. Bogdanov,
A. Brazier,
F. Camilo,
D. J. Champion,
S. Chatterjee,
J. Cordes,
F. Crawford,
J. Deneva,
G. Desvignes
, et al. (19 additional authors not shown)
Abstract:
Modern radio pulsar surveys produce a large volume of prospective candidates, the majority of which are polluted by human-created radio frequency interference or other forms of noise. Typically, large numbers of candidates need to be visually inspected in order to determine if they are real pulsars. This process can be labor intensive. In this paper, we introduce an algorithm called PEACE (Pulsar…
▽ More
Modern radio pulsar surveys produce a large volume of prospective candidates, the majority of which are polluted by human-created radio frequency interference or other forms of noise. Typically, large numbers of candidates need to be visually inspected in order to determine if they are real pulsars. This process can be labor intensive. In this paper, we introduce an algorithm called PEACE (Pulsar Evaluation Algorithm for Candidate Extraction) which improves the efficiency of identifying pulsar signals. The algorithm ranks the candidates based on a score function. Unlike popular machine-learning based algorithms, no prior training data sets are required. This algorithm has been applied to data from several large-scale radio pulsar surveys. Using the human-based ranking results generated by students in the Arecibo Remote Command enter programme, the statistical performance of PEACE was evaluated. It was found that PEACE ranked 68% of the student-identified pulsars within the top 0.17% of sorted candidates, 95% within the top 0.34%, and 100% within the top 3.7%. This clearly demonstrates that PEACE significantly increases the pulsar identification rate by a factor of about 50 to 1000. To date, PEACE has been directly responsible for the discovery of 47 new pulsars, 5 of which are millisecond pulsars that may be useful for pulsar timing based gravitational-wave detection projects.
△ Less
Submitted 2 May, 2013;
originally announced May 2013.
-
The hunt for new pulsars with the Green Bank Telescope
Authors:
Ryan S. Lynch,
Anne M. Archibald,
Shawn Banaszak,
Alison Becker,
Aaron Berndsen,
Chris Biwer,
Jason Boyles,
Rogerio F. Cardoso,
Angus Cherry,
Louis P. Dartez,
David Day,
Courtney R. Epstein,
Joe Flanigan,
Anthony Ford,
Alejandro Garcia,
Jason W. T. Hessels,
Fredrick A. Jenet,
David L. Kaplan,
Chen Karako-Argaman,
Victoria M. Kaspi,
Vladislav I. Kondratiev,
Duncan R. Lorimer,
Grady Lunsford,
Jose Martinez,
Maura A. McLaughlin
, et al. (11 additional authors not shown)
Abstract:
The Green Bank Telescope (GBT) is the largest fully steerable radio telescope in the world and is one of our greatest tools for discovering and studying radio pulsars. Over the last decade, the GBT has successfully found over 100 new pulsars through large-area surveys. Here I discuss the two most recent---the GBT 350 MHz Drift-scan survey and the Green Bank North Celestial Cap survey. The primary…
▽ More
The Green Bank Telescope (GBT) is the largest fully steerable radio telescope in the world and is one of our greatest tools for discovering and studying radio pulsars. Over the last decade, the GBT has successfully found over 100 new pulsars through large-area surveys. Here I discuss the two most recent---the GBT 350 MHz Drift-scan survey and the Green Bank North Celestial Cap survey. The primary science goal of both surveys is to find interesting individual pulsars, including young pulsars, rotating radio transients, exotic binary systems, and especially bright millisecond pulsars (MSPs) suitable for inclusion in Pulsar Timing Arrays, which are trying to directly detect gravitational waves. These two surveys have combined to discover 85 pulsars to date, among which are 14 MSPs and many unique and fascinating systems. I present highlights from these surveys and discuss future plans. I also discuss recent results from targeted GBT pulsar searches of globular clusters and Fermi sources.
△ Less
Submitted 21 March, 2013;
originally announced March 2013.
-
Bond Breaking and Bond Formation: How Electron Correlation is Captured in Many-Body Perturbation Theory and Density-Functional Theory
Authors:
Fabio Caruso,
Daniel R. Rohr,
Maria Hellgren,
Xinguo Ren,
Patrick Rinke,
Angel Rubio,
Matthias Scheffler
Abstract:
For the paradigmatic case of H2-dissociation we compare state-of-the-art many-body perturbation theory (MBPT) in the GW approximation and density-functional theory (DFT) in the exact-exchange plus random-phase approximation for the correlation energy (EX+cRPA). For an unbiased comparison and to prevent spurious starting point effects both approaches are iterated to full self-consistency (i.e. sc-R…
▽ More
For the paradigmatic case of H2-dissociation we compare state-of-the-art many-body perturbation theory (MBPT) in the GW approximation and density-functional theory (DFT) in the exact-exchange plus random-phase approximation for the correlation energy (EX+cRPA). For an unbiased comparison and to prevent spurious starting point effects both approaches are iterated to full self-consistency (i.e. sc-RPA and sc-GW). The exchange-correlation diagrams in both approaches are topologically identical, but in sc-RPA they are evaluated with non-interacting and in sc-GW with interacting Green functions. This has a profound consequence for the dissociation region, where sc-RPA is superior to sc-GW. We argue that for a given diagrammatic expansion, the DFT framework outperforms the many-body framework when it comes to bond-breaking. We attribute this to the difference in the correlation energy rather than the treatment of the kinetic energy.
△ Less
Submitted 22 April, 2013; v1 submitted 31 October, 2012;
originally announced October 2012.
-
Discovery of the Optical/Ultraviolet/Gamma-ray Counterpart to the Eclipsing Millisecond Pulsar J1816+4510
Authors:
D. L. Kaplan,
K. Stovall,
S. M. Ransom,
M. S. E. Roberts,
R. Kotulla,
A. M. Archibald,
C. M. Biwer,
J. Boyles,
L. Dartez,
D. F. Day,
A. J. Ford,
A. Garcia,
J. W. T. Hessels,
F. A. Jenet,
C. Karako,
V. M. Kaspi,
V. I. Kondratiev,
D. R. Lorimer,
R. S. Lynch,
M. A. McLaughlin,
M. D. W. Rohr,
X. Siemens,
I. H. Stairs,
J. van Leeuwen
Abstract:
The energetic, eclipsing millisecond pulsar J1816+4510 was recently discovered in a low-frequency radio survey with the Green Bank Telescope. With an orbital period of 8.7 hr and minimum companion mass of 0.16 Msun it appears to belong to an increasingly important class of pulsars that are ablating their low-mass companions. We report the discovery of the gamma-ray counterpart to this pulsar, and…
▽ More
The energetic, eclipsing millisecond pulsar J1816+4510 was recently discovered in a low-frequency radio survey with the Green Bank Telescope. With an orbital period of 8.7 hr and minimum companion mass of 0.16 Msun it appears to belong to an increasingly important class of pulsars that are ablating their low-mass companions. We report the discovery of the gamma-ray counterpart to this pulsar, and present a likely optical/ultraviolet counterpart as well. Using the radio ephemeris we detect pulsations in the unclassified gamma-ray source 2FGL J1816.5+4511, implying an efficiency of ~25% in converting the pulsar's spin-down luminosity into gamma-rays and adding PSR J1816+4510 to the large number of millisecond pulsars detected by Fermi. The likely optical/UV counterpart was identified through position coincidence (<0.1") and unusual colors. Assuming that it is the companion, with R=18.27+/-0.03 mag and effective temperature >15,000 K it would be among the brightest and hottest of low-mass pulsar companions, and appears qualitatively different from other eclipsing pulsar systems. In particular, current data suggest that it is a factor of two larger than most white dwarfs of its mass, but a factor of four smaller than its Roche lobe. We discuss possible reasons for its high temperature and odd size, and suggest that it recently underwent a violent episode of mass loss. Regardless of origin, its brightness and the relative unimportance of irradiation make it an ideal target for a mass, and hence a neutron star mass, determination.
△ Less
Submitted 16 May, 2012;
originally announced May 2012.
-
Inclusive J/psi production in pp collisions at sqrt(s) = 2.76 TeV
Authors:
ALICE Collaboration,
B. Abelev,
J. Adam,
D. Adamova,
A. M. Adare,
M. M. Aggarwal,
G. Aglieri Rinella,
A. G. Agocs,
A. Agostinelli,
S. Aguilar Salazar,
Z. Ahammed,
A. Ahmad Masoodi,
N. Ahmad,
S. U. Ahn,
A. Akindinov,
D. Aleksandrov,
B. Alessandro,
R. Alfaro Molina,
A. Alici,
A. Alkin,
E. Almaraz Avina,
J. Alme,
T. Alt,
V. Altini,
S. Altinpinar
, et al. (948 additional authors not shown)
Abstract:
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=…
▽ More
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=19.9 nb^-1, and the corresponding signal statistics are N_J/psi^e+e-=59 +/- 14 and N_J/psi^mu+mu-=1364 +/- 53. We present dsigma_J/psi/dy for the two rapidity regions under study and, for the forward-y range, d^2sigma_J/psi/dydp_t in the transverse momentum domain 0<p_t<8 GeV/c. The results are compared with previously published results at sqrt(s)=7 TeV and with theoretical calculations.
△ Less
Submitted 6 November, 2012; v1 submitted 16 March, 2012;
originally announced March 2012.
-
Correlation potentials for molecular bond dissociation within the self-consistent random phase approximation
Authors:
M. Hellgren,
D. R. Rohr,
E. K. U. Gross
Abstract:
Self-consistent correlation potentials for H$_2$ and LiH for various inter-atomic separations are obtained within the random phase approximation (RPA) of density functional theory. The RPA correlation potential shows a peak at the bond midpoint, which is an exact feature of the true correlation potential, but lacks another exact feature: the step important to preserve integer charge on the atomic…
▽ More
Self-consistent correlation potentials for H$_2$ and LiH for various inter-atomic separations are obtained within the random phase approximation (RPA) of density functional theory. The RPA correlation potential shows a peak at the bond midpoint, which is an exact feature of the true correlation potential, but lacks another exact feature: the step important to preserve integer charge on the atomic fragments in the dissociation limit. An analysis of the RPA energy functional in terms of fractional charge is given which confirms these observations. We find that the RPA misses the derivative discontinuity at odd integer particle numbers but explicitly eliminates the fractional spin error in the exact-exchange functional. The latter finding explains the accurate total energy in the dissociation limit.
△ Less
Submitted 23 January, 2012; v1 submitted 27 October, 2011;
originally announced October 2011.
-
Combining Density Functional Theory and Density Matrix Functional Theory
Authors:
Daniel R. Rohr,
Julien Toulouse,
Katarzyna Pernal
Abstract:
We combine density-functional theory with density-matrix functional theory to get the best of both worlds. This is achieved by range separation of the electronic interaction which permits to rigorously combine a short-range density functional with a long-range density-matrix functional. The short-range density functional is approximated by the short-range version of the Perdew-Burke-Ernzerhof func…
▽ More
We combine density-functional theory with density-matrix functional theory to get the best of both worlds. This is achieved by range separation of the electronic interaction which permits to rigorously combine a short-range density functional with a long-range density-matrix functional. The short-range density functional is approximated by the short-range version of the Perdew-Burke-Ernzerhof functional (srPBE). The long-range density-matrix functional is approximated by the long-range version of the Buijse-Baerends functional (lrBB). The obtained srPBE+lrBB method accurately describes both static and dynamic electron correlation at a computational cost similar to that of standard density-functional approximations. This is shown for the dissociation curves of the H$_{2}$, LiH, BH and HF molecules.
△ Less
Submitted 4 August, 2010;
originally announced August 2010.
-
Full Configuration Interaction wave function as a formal solution to the Optimized Effective Potential and Kohn-Sham models in finite basis sets
Authors:
Daniel R. Rohr,
Andreas Savin
Abstract:
Using finite basis sets, it is shown how to construct a local Hamiltonian, such that one of its infinitely many degenerate eigenfunctions is the ground state full configuration interaction (FCI) wave function in that basis set. Formally, the local potential of this Hamiltonian is the optimized effective potential and the exact Kohn-Sham potential at the same time, because the FCI wave function y…
▽ More
Using finite basis sets, it is shown how to construct a local Hamiltonian, such that one of its infinitely many degenerate eigenfunctions is the ground state full configuration interaction (FCI) wave function in that basis set. Formally, the local potential of this Hamiltonian is the optimized effective potential and the exact Kohn-Sham potential at the same time, because the FCI wave function yields the exact ground-state density and energy. It is not the aim of this paper to provide a new algorithm for obtaining FCI wave functions. A new potential is the goal.
△ Less
Submitted 16 October, 2009;
originally announced October 2009.
