-
Verbesserung des Record Linkage für die Gesundheitsforschung in Deutschland
Authors:
Timm Intemann,
Knut Kaulke,
Dennis-Kenji Kipker,
Vanessa Lettieri,
Christoph Stallmann,
Carsten O. Schmidt,
Lars Geidel,
Martin Bialke,
Christopher Hampf,
Dana Stahl,
Martin Lablans,
Florens Rohde,
Martin Franke,
Klaus Kraywinkel,
Joachim Kieschke,
Sebastian Bartholomäus,
Anatol-Fiete Näher,
Galina Tremper,
Mohamed Lambarki,
Stefanie March,
Fabian Prasser,
Anna Christine Haber,
Johannes Drepper,
Irene Schlünder,
Toralf Kirsten
, et al. (5 additional authors not shown)
Abstract:
Record linkage means linking data from multiple sources. This approach enables the answering of scientific questions that cannot be addressed using single data sources due to limited variables. The potential of linked data for health research is enormous, as it can enhance prevention, treatment, and population health policies. Due the sensitivity of health data, there are strict legal requirements…
▽ More
Record linkage means linking data from multiple sources. This approach enables the answering of scientific questions that cannot be addressed using single data sources due to limited variables. The potential of linked data for health research is enormous, as it can enhance prevention, treatment, and population health policies. Due the sensitivity of health data, there are strict legal requirements to prevent potential misuse. However, these requirements also limit the use of health data for research, thereby hindering innovations in prevention and care. Also, comprehensive Record linkage in Germany is often challenging due to lacking unique personal identifiers or interoperable solutions. Rather, the need to protect data is often weighed against the importance of research aiming at healthcare enhancements: for instance, data protection officers may demand the informed consent of individual study participants for data linkage, even when this is not mandatory. Furthermore, legal frameworks may be interpreted differently on varying occasions. Given both, technical and legal challenges, record linkage for health research in Germany falls behind the standards of other European countries. To ensure successful record linkage, case-specific solutions must be developed, tested, and modified as necessary before implementation. This paper discusses limitations and possibilities of various data linkage approaches tailored to different use cases in compliance with the European General Data Protection Regulation. It further describes requirements for achieving a more research-friendly approach to linking health data records in Germany. Additionally, it provides recommendations to legislators. The objective of this work is to improve record linkage for health research in Germany.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Broadening the perspective for sustainable AI: Comprehensive sustainability criteria and indicators for AI systems
Authors:
Friederike Rohde,
Josephin Wagner,
Andreas Meyer,
Philipp Reinhard,
Marcus Voss,
Ulrich Petschow,
Anne Mollen
Abstract:
The increased use of AI systems is associated with multi-faceted societal, environmental, and economic consequences. These include non-transparent decision-making processes, discrimination, increasing inequalities, rising energy consumption and greenhouse gas emissions in AI model development and application, and an increasing concentration of economic power. By considering the multi-dimensionalit…
▽ More
The increased use of AI systems is associated with multi-faceted societal, environmental, and economic consequences. These include non-transparent decision-making processes, discrimination, increasing inequalities, rising energy consumption and greenhouse gas emissions in AI model development and application, and an increasing concentration of economic power. By considering the multi-dimensionality of sustainability, this paper takes steps towards substantiating the call for an overarching perspective on "sustainable AI". It presents the SCAIS Framework (Sustainability Criteria and Indicators for Artificial Intelligence Systems) which contains a set 19 sustainability criteria for sustainable AI and 67 indicators that is based on the results of a critical review and expert workshops. This interdisciplinary approach contributes a unique holistic perspective to facilitate and structure the discourse on sustainable AI. Further, it provides a concrete framework that lays the foundation for develo** standards and tools to support the conscious development and application of AI systems.
△ Less
Submitted 22 November, 2023; v1 submitted 22 June, 2023;
originally announced June 2023.
-
Protostellar Outflows: a window to the past
Authors:
P. F. Rohde,
S. Walch,
D. Seifried,
A. P. Whitworth,
S. D. Clarke
Abstract:
During the early phases of low-mass star formation, episodic accretion causes the ejection of high-velocity outflow bullets, which carry a fossil record of the driving protostar's accretion history. We present 44 SPH simulations of $1\,\mathrm{M}_{\odot}$ cores, covering a wide range of initial conditions, and follow the cores for five free-fall times. Individual protostars are represented by sink…
▽ More
During the early phases of low-mass star formation, episodic accretion causes the ejection of high-velocity outflow bullets, which carry a fossil record of the driving protostar's accretion history. We present 44 SPH simulations of $1\,\mathrm{M}_{\odot}$ cores, covering a wide range of initial conditions, and follow the cores for five free-fall times. Individual protostars are represented by sink particles, and the sink particles launch episodic outflows using a subgrid model. The Optics algorithm is used to identify individual episodic bullets within the outflows. The parameters of the overall outflow and the individual bullets are then used to estimate the age and energetics of the outflow, and the accretion events that triggered it; and to evaluate how reliable these estimates are, if observational uncertainties and selection effects (like inclination) are neglected. Of the commonly used methods for estimating outflow ages, it appears that those based on the length and speed of advance of the lobe are the most reliable in the early phases of evolution, and those based on the width of the outflow cavity and the speed of advance are most reliable during the later phases. We describe a new method that is almost as accurate as these methods, and reliable throughout the evolution. In addition we show how the accretion history of the protostar can be accurately reconstructed from the dynamics of the bullets if each lobe contains at least two bullets. The outflows entrain about ten times more mass than originally ejected by the protostar.
△ Less
Submitted 9 January, 2022;
originally announced January 2022.
-
The impact of episodic outflow feedback on stellar multiplicity and the star formation efficiency
Authors:
P. F. Rohde,
S. Walch,
S. D. Clarke,
D. Seifried,
A. P. Whitworth,
A. Klepitko
Abstract:
The accretion of material onto young protostars is accompanied by the launching of outflows. Observations show that accretion, and therefore also outflows, are episodic. However, the effects of episodic outflow feedback on the core-scale are not well understood. We have performed 88 Smoothed Particle Hydrodynamic simulations of turbulent dense $1 \, \mathrm{M}_{\odot}$ cores, to study the influenc…
▽ More
The accretion of material onto young protostars is accompanied by the launching of outflows. Observations show that accretion, and therefore also outflows, are episodic. However, the effects of episodic outflow feedback on the core-scale are not well understood. We have performed 88 Smoothed Particle Hydrodynamic simulations of turbulent dense $1 \, \mathrm{M}_{\odot}$ cores, to study the influence of episodic outflow feedback on the stellar multiplicity and the star formation efficiency (SFE). Protostars are represented by sink particles, which use a sub-grid model to capture stellar evolution, inner-disc evolution, episodic accretion and the launching of outflows. By comparing simulations with and without episodic outflow feedback, we show that simulations with outflow feedback reproduce the binary statistics of young stellar populations, including the relative proportions of singles, binaries, triples, etc. and the high incidence of twin binaries with $q\geq 0.95$; simulations without outflow feedback do not. Entrainment factors (the ratio between total outflowing mass and initially ejected mass) are typically $\sim 7\pm 2$, but can be much higher if the total mass of stars formed in a core is low and/or outflow episodes are infrequent. By decreasing both the mean mass of the stars formed and the number of stars formed, outflow feedback reduces the SFE by about a factor of 2 (as compared with simulations that do not include outflow feedback).
△ Less
Submitted 24 September, 2020;
originally announced September 2020.
-
End-to-end topology for fiber comb based optical frequency transfer at the $10^{-21}$ level
Authors:
Erik Benkler,
Burghard Lipphardt,
Thomas Puppe,
Rafał Wilk,
Felix Rohde,
Uwe Sterr
Abstract:
We introduce a simple and robust scheme for optical frequency transfer of an ultra-stable source light field via an optical frequency comb to a field at a target optical frequency, where highest stability is required, e.g. for the interrogation of an optical clock. The scheme relies on a topology for end-to-end suppression of the influence of optical path-length fluctuations, which is attained by…
▽ More
We introduce a simple and robust scheme for optical frequency transfer of an ultra-stable source light field via an optical frequency comb to a field at a target optical frequency, where highest stability is required, e.g. for the interrogation of an optical clock. The scheme relies on a topology for end-to-end suppression of the influence of optical path-length fluctuations, which is attained by actively phase-stabilized delivery, combined with common-path propagation. This approach provides a robust stability improvement without the need for additional isolation against environmental disturbances such as temperature, pressure or humidity changes. We measure residual frequency transfer instabilities by comparing the frequency transfers carried out with two independent combs simultaneously. Residual fractional frequency instabilities between two systems of $8\times10^{-18}$ at 1 s and $3\times10^{-21}$ at $10^5$ s averaging time are observed. We discuss the individual noise contributions to the residual instability. The presented scheme is technically simple, robust against environmental parameter fluctuations, and enables an ultra-stable frequency transfer, e.g. to optical clock lasers or to lasers in gravitational wave detectors.
△ Less
Submitted 1 April, 2020; v1 submitted 9 October, 2019;
originally announced October 2019.
-
Evolution of Hubble wedges in episodic protostellar outflows
Authors:
P. F. Rohde,
S. Walch,
D. Seifried,
A. P. Whitworth,
S. D. Clarke
Abstract:
Young low-mass protostars undergo short phases of high accretion and outburst activity leading to lumpy outflows. Recent observations have shown that the position-velocity and mass-velocity diagrams of such outflows exhibit individual bullet-like features; some of these bullets subscribe to a `Hubble Law' velocity relation, and others are manifest as `Hubble wedges'. In order to explore the origin…
▽ More
Young low-mass protostars undergo short phases of high accretion and outburst activity leading to lumpy outflows. Recent observations have shown that the position-velocity and mass-velocity diagrams of such outflows exhibit individual bullet-like features; some of these bullets subscribe to a `Hubble Law' velocity relation, and others are manifest as `Hubble wedges'. In order to explore the origin of these features, we have developed a new episodic outflow model for the SPH code {\sc gandalf}, which mimics the accretion and ejection behaviour of FU Ori type stars. We apply this model to simulations of star formation, invoking two types of initial conditions: spherically symmetric cores in solid-body rotation with $ρ\propto r^{-2}$, and spherically symmetric turbulent cores with density proportional to the density of a Bonnor-Ebert sphere. For a wide range of model parameters, we find that episodic outflows lead to self-regulation of the ejected mass and momentum, and we achieve acceptable results, even with relatively low resolution. Using this model, we find that recently ejected outflow bullets produce a `Hubble wedge' in the position-velocity relation. However, once such a bullet hits the leading shock front, it decelerates and aligns with older bullets to form a `Hubble-law'. Bullets can be identified as bumps in the mass-velocity relation, which can be fit with a power-law, $dM/d\upsilon_{_{\rm RAD}}\propto\upsilon_{_{\rm RAD}}^{-1.5}$.
△ Less
Submitted 10 December, 2018; v1 submitted 8 November, 2018;
originally announced November 2018.
-
Active and passive stabilization of a high-power UV frequency-doubled diode laser
Authors:
Ulrich Eismann,
Martin Enderlein,
Konstantinos Simeonidis,
Felix Keller,
Felix Rohde,
Dmitrijs Opalevs,
Matthias Scholz,
Wilhelm Kaenders,
Jürgen Stuhler
Abstract:
We present a resonantly frequency-doubled tapered amplified semiconductor laser system emitting up to 2.6 W blue light at 400 nm. The output power is stable on both short and long timescales with 0.12% RMS relative intensity noise, and less than 0.15%/h relative power loss over 16 hours of free running continuous operation. Furthermore, the output power can be actively stabilized, and the alignmen…
▽ More
We present a resonantly frequency-doubled tapered amplified semiconductor laser system emitting up to 2.6 W blue light at 400 nm. The output power is stable on both short and long timescales with 0.12% RMS relative intensity noise, and less than 0.15%/h relative power loss over 16 hours of free running continuous operation. Furthermore, the output power can be actively stabilized, and the alignment of the input beams of the tapered amplifier chip, the frequency doubling cavity and-in case of fiber output-the fiber can be optimized automatically using computer-controlled mirrors.
△ Less
Submitted 24 June, 2016;
originally announced June 2016.
-
Difference-frequency combs in cold atom physics
Authors:
Russell Kliese,
Nazanin Hoghooghi,
Thomas Puppe,
Felix Rohde,
Alexander Sell,
Armin Zach,
Patrick Leisching,
Wilhelm Kaenders,
Niamh C. Keegan,
Alistair D. Bounds,
Elizabeth M. Bridge,
Jack Leonard,
Charles S. Adams,
Simon L. Cornish,
Matthew P. A. Jones
Abstract:
Optical frequency combs provide the clockwork to relate optical frequencies to radio frequencies. Hence, combs allow to measure optical frequencies with respect to a radio frequency where the accuracy is limited only by the reference signal. In order to provide a stable link between the radio and optical frequencies, the two parameters of the frequency comb must be fixed: the carrier envelope offs…
▽ More
Optical frequency combs provide the clockwork to relate optical frequencies to radio frequencies. Hence, combs allow to measure optical frequencies with respect to a radio frequency where the accuracy is limited only by the reference signal. In order to provide a stable link between the radio and optical frequencies, the two parameters of the frequency comb must be fixed: the carrier envelope offset frequency $f_{\rm ceo}$ and the pulse repetition-rate $f_{\rm rep}$. We have developed the first optical frequency comb based on difference frequency generation (DFG) that eliminates $f_{\rm ceo}$ by design - specifically tailored for applications in cold atom physics. An $f_{\rm ceo}$-free spectrum at 1550 nm is generated from a super continuum spanning more than an optical octave. Established amplification and frequency conversion techniques based on reliable telecom fiber technology allow generation of multiple wavelength outputs. In this paper we discuss the frequency comb design, characterization, and optical frequency measurement of Sr Rydberg states. The DFG technique allows for a compact and robust, passively $f_{\rm ceo}$ stable frequency comb significantly improving reliability in practical applications.
△ Less
Submitted 9 May, 2016;
originally announced May 2016.
-
Phase-predictable tuning of single-frequency optical synthesizers
Authors:
Felix Rohde,
Erik Benkler,
Thomas Puppe,
Reinhard Unterreitmayer,
Armin Zach,
Harald R Telle
Abstract:
We investigate the tuning behavior of a novel type of single-frequency optical synthesizers by phase comparison of the output signals of two identical devices. We achieve phase-stable and cycle slip free frequency tuning over 28.1 GHz with a maximum zero-to-peak phase deviation of 62 mrad. In contrast to previous implementations of single-frequency optical synthesizers, no comb line order switchin…
▽ More
We investigate the tuning behavior of a novel type of single-frequency optical synthesizers by phase comparison of the output signals of two identical devices. We achieve phase-stable and cycle slip free frequency tuning over 28.1 GHz with a maximum zero-to-peak phase deviation of 62 mrad. In contrast to previous implementations of single-frequency optical synthesizers, no comb line order switching is needed when tuned over more than one comb line spacing range of the employed frequency comb.
△ Less
Submitted 10 June, 2014;
originally announced June 2014.
-
Heralded single photon absorption by a single atom
Authors:
Nicolas Piro,
Felix Rohde,
Carsten Schuck,
Marc Almendros,
Jan Huwer,
Joyee Ghosh,
Albrecht Haase,
Markus Hennrich,
Francois Dubin,
Jürgen Eschner
Abstract:
The emission and absorption of single photons by single atomic particles is a fundamental limit of matter-light interaction, manifesting its quantum mechanical nature. At the same time, as a controlled process it is a key enabling tool for quantum technologies, such as quantum optical information technology [1, 2] and quantum metrology [3, 4, 5, 6]. Controlling both emission and absorption will al…
▽ More
The emission and absorption of single photons by single atomic particles is a fundamental limit of matter-light interaction, manifesting its quantum mechanical nature. At the same time, as a controlled process it is a key enabling tool for quantum technologies, such as quantum optical information technology [1, 2] and quantum metrology [3, 4, 5, 6]. Controlling both emission and absorption will allow implementing quantum networking scenarios [1, 7, 8, 9], where photonic communication of quantum information is interfaced with its local processing in atoms. In studies of single-photon emission, recent progress includes control of the shape, bandwidth, frequency, and polarization of single-photon sources [10, 11, 12, 13, 14, 15, 16, 17], and the demonstration of atom-photon entanglement [18, 19, 20]. Controlled absorption of a single photon by a single atom is much less investigated; proposals exist but only very preliminary steps have been taken experimentally such as detecting the attenuation and phase shift of a weak laser beam by a single atom [21, 22], and designing an optical system that covers a large fraction of the full solid angle [23, 24, 25]. Here we report the interaction of single heralded photons with a single trapped atom. We find strong correlations of the detection of a heralding photon with a change in the quantum state of the atom marking absorption of the quantum-correlated heralded photon. In coupling a single absorber with a quantum light source, our experiment demonstrates previously unexplored matter-light interaction, while opening up new avenues towards photon-atom entanglement conversion in quantum technology.
△ Less
Submitted 23 April, 2010;
originally announced April 2010.
-
Polarization-correlated photon pairs from a single ion
Authors:
F. Rohde,
J. Huwer,
N. Piro,
M. Almendros,
C. Schuck,
F. Dubin,
J. Eschner
Abstract:
In the fluorescence light of a single atom, the probability for emission of a photon with certain polarization depends on the polarization of the photon emitted immediately before it. Here correlations of such kind are investigated with a single trapped calcium ion by means of second order correlation functions. A theoretical model is developed and fitted to the experimental data, which show 91%…
▽ More
In the fluorescence light of a single atom, the probability for emission of a photon with certain polarization depends on the polarization of the photon emitted immediately before it. Here correlations of such kind are investigated with a single trapped calcium ion by means of second order correlation functions. A theoretical model is developed and fitted to the experimental data, which show 91% probability for the emission of polarization-correlated photon pairs within 24 ns.
△ Less
Submitted 25 November, 2009;
originally announced November 2009.
-
Two-color photoionization of calcium using SHG and LED light
Authors:
C. Schuck,
F. Rohde,
M. Almendros,
M. Hennrich,
J. Eschner
Abstract:
We present a photoionization method to load single 40Ca ions in a linear Paul trap from an atomic beam. Neutral Ca I atoms are resonantly excited from the ground state to the intermediate 4s4p 1P_1-level using coherent 423nm radiation produced by single-pass second harmonic generation in a periodically poled KTiOPO_4 crystal pumped with an 120mW extended cavity diode laser. Ionization is then at…
▽ More
We present a photoionization method to load single 40Ca ions in a linear Paul trap from an atomic beam. Neutral Ca I atoms are resonantly excited from the ground state to the intermediate 4s4p 1P_1-level using coherent 423nm radiation produced by single-pass second harmonic generation in a periodically poled KTiOPO_4 crystal pumped with an 120mW extended cavity diode laser. Ionization is then attained with a high-power light emitting diode imaged to the trap center, using an appropriately designed optical system composed of standard achromatic doublet lenses. The setup simplifies previous implementations at similar efficiency, and it hardly requires any maintenance at all.
△ Less
Submitted 19 November, 2009;
originally announced November 2009.
-
A diode laser stabilization scheme for 40Ca+ single ion spectroscopy
Authors:
F. Rohde,
M. Almendros,
C. Schuck,
J. Huwer,
M. Hennrich,
J. Eschner
Abstract:
We present a scheme for stabilizing multiple lasers at wavelengths between 795 and 866 nm to the same atomic reference line. A reference laser at 852 nm is stabilized to the Cs D2 line using a Doppler-free frequency modulation technique. Through transfer cavities, four lasers are stabilized to the relevant atomic transitions in 40Ca+. The rms linewidth of a transfer-locked laser is measured to b…
▽ More
We present a scheme for stabilizing multiple lasers at wavelengths between 795 and 866 nm to the same atomic reference line. A reference laser at 852 nm is stabilized to the Cs D2 line using a Doppler-free frequency modulation technique. Through transfer cavities, four lasers are stabilized to the relevant atomic transitions in 40Ca+. The rms linewidth of a transfer-locked laser is measured to be 123 kHz with respect to an independent atomic reference, the Rb D1 line. This stability is confirmed by the comparison of an excitation spectrum of a single 40Ca+ ion to an eight-level Bloch equation model. The measured Allan variance of 10^(-22) at 10 s demonstrates a high degree of stability for time scales up to 100 s.
△ Less
Submitted 6 October, 2009;
originally announced October 2009.
-
Resonant interaction of a single atom with single photons from a down-conversion source
Authors:
C. Schuck,
F. Rohde,
N. Piro,
M. Almendros,
J. Huwer,
M. W. Mitchell,
M. Hennrich,
A. Haase,
F. Dubin,
J. Eschner
Abstract:
We observe the interaction of a single trapped calcium ion with single photons produced by a narrow-band, resonant down-conversion source [A. Haase et al., Opt. Lett. 34, 55 (2009)], employing a quantum jump scheme. Using the temperature dependence of the down-conversion spectrum and the tunability of the narrow source, absorption of the down-conversion photons is quantitatively characterized.
We observe the interaction of a single trapped calcium ion with single photons produced by a narrow-band, resonant down-conversion source [A. Haase et al., Opt. Lett. 34, 55 (2009)], employing a quantum jump scheme. Using the temperature dependence of the down-conversion spectrum and the tunability of the narrow source, absorption of the down-conversion photons is quantitatively characterized.
△ Less
Submitted 9 June, 2009;
originally announced June 2009.
-
Bandwidth-tunable single photon source in an ion trap quantum network
Authors:
M. Almendros,
J. Huwer,
N. Piro,
F. Rohde,
C. Schuck,
M. Hennrich,
F. Dubin,
J. Eschner
Abstract:
We report a tunable single-photon source based on a single trapped ion. Employing spontaneous Raman scattering and in-vacuum optics with large numerical aperture, single photons are efficiently created with controlled temporal shape and coherence time. These can be varied between 70 ns and 1.6 $μ$s, as characterized by operating two sources simultaneously in two remote ion traps which reveals mu…
▽ More
We report a tunable single-photon source based on a single trapped ion. Employing spontaneous Raman scattering and in-vacuum optics with large numerical aperture, single photons are efficiently created with controlled temporal shape and coherence time. These can be varied between 70 ns and 1.6 $μ$s, as characterized by operating two sources simultaneously in two remote ion traps which reveals mutual and individual coherence through two-photon interference.
△ Less
Submitted 12 September, 2009; v1 submitted 22 May, 2009;
originally announced May 2009.
-
Quantum interference from remotely trapped ions
Authors:
S. Gerber,
D. Rotter,
M. Hennrich,
R. Blatt,
F. Rohde,
C. Schuck,
M. Almendros,
R. Gehr,
F. Dubin,
J. Eschner
Abstract:
We observe quantum interference of photons emitted by two continuously laser-excited single ions, independently trapped in distinct vacuum vessels. High contrast two-photon interference is observed in two experiments with different ion species, calcium and barium. Our experimental findings are quantitatively reproduced by Bloch equation calculations. In particular, we show that the coherence of…
▽ More
We observe quantum interference of photons emitted by two continuously laser-excited single ions, independently trapped in distinct vacuum vessels. High contrast two-photon interference is observed in two experiments with different ion species, calcium and barium. Our experimental findings are quantitatively reproduced by Bloch equation calculations. In particular, we show that the coherence of the individual resonance fluorescence light field is determined from the observed interference.
△ Less
Submitted 10 October, 2008;
originally announced October 2008.
-
Entanglement of distant atoms by projective measurement: The role of detection efficiency
Authors:
Stefano Zippilli,
Georgina A. Olivares-Renteria,
Giovanna Morigi,
Carsten Schuck,
Felix Rohde,
Juergen Eschner
Abstract:
We assess proposals for entangling two distant atoms by measurement of emitted photons, analyzing how their performance depends on the photon detection efficiency. We consider schemes based on measurement of one or two photons and compare them in terms of the probability to obtain the detection event and of the conditional fidelity with which the desired entangled state is created. Based on an u…
▽ More
We assess proposals for entangling two distant atoms by measurement of emitted photons, analyzing how their performance depends on the photon detection efficiency. We consider schemes based on measurement of one or two photons and compare them in terms of the probability to obtain the detection event and of the conditional fidelity with which the desired entangled state is created. Based on an unravelling of the master equation, we quantify the parameter regimes in which one or the other scheme is more efficient, including the possible combination of the one-photon scheme with state purification. In general, protocols based on one-photon detection are more efficient in set-ups characterized by low photon detection efficiency, while at larger values two-photon protocols are preferable. We give numerical examples based on current experiments.
△ Less
Submitted 5 June, 2008;
originally announced June 2008.
-
Nano Positioning of Single Atoms in a Micro Cavity
Authors:
Stefan Nussmann,
Markus Hijlkema,
Bernhard Weber,
Felix Rohde,
Gerhard Rempe,
Axel Kuhn
Abstract:
The coupling of individual atoms to a high-finesse optical cavity is precisely controlled and adjusted using a standing-wave dipole-force trap, a challenge for strong atom-cavity coupling. Ultracold Rubidium atoms are first loaded into potential minima of the dipole trap in the center of the cavity. Then we use the trap as a conveyor belt that we set into motion perpendicular to the cavity axis.…
▽ More
The coupling of individual atoms to a high-finesse optical cavity is precisely controlled and adjusted using a standing-wave dipole-force trap, a challenge for strong atom-cavity coupling. Ultracold Rubidium atoms are first loaded into potential minima of the dipole trap in the center of the cavity. Then we use the trap as a conveyor belt that we set into motion perpendicular to the cavity axis. This allows us to repetitively move atoms out of and back into the cavity mode with a repositioning precision of 135 nm. This makes possible to either selectively address one atom of a string of atoms by the cavity, or to simultaneously couple two precisely separated atoms to a higher mode of the cavity.
△ Less
Submitted 10 June, 2005;
originally announced June 2005.
