Showing 1–19 of 19 results for author: Rogalla, H

Improved electronic measurement of the Boltzmann constant by Johnson noise Thermometry

Authors: Jifeng Qu, Samuel P Benz, Alessio Pollarolo, Horst Rogalla, Weston L Tew, Rod White, Kunli Zhou

Abstract: The unit of thermodynamic temperature, the kelvin, will be redefined in 2018 by fixing the value of the Boltzmann constant, k. The present CODATA recommended value of k is determined predominantly by acoustic gas-thermometry results. To provide a value of k based on different physical principles, purely electronic measurements of k were performed by using a Johnson noise thermometer to compare the… ▽ More The unit of thermodynamic temperature, the kelvin, will be redefined in 2018 by fixing the value of the Boltzmann constant, k. The present CODATA recommended value of k is determined predominantly by acoustic gas-thermometry results. To provide a value of k based on different physical principles, purely electronic measurements of k were performed by using a Johnson noise thermometer to compare the thermal noise power of a 200 Ohm sensing resistor immersed in a triple-point-of-water cell to the noise power of a quantum-accurate pseudo-random noise waveform of nominally equal noise power. Measurements integrated over a bandwidth of 550 kHz and a total integration time of 33 days gave a measured value of k = 1.3806514(48)x10^-23 J/K, for which the relative standard uncertainty is 3.5x10^-6 and the relative offset from the CODATA 2010 value is +1.9x10^-6. △ Less

Submitted 31 December, 2014; originally announced January 2015.

Comments: 20 pages, 9 figures

Spin-transfer torque switching in nanopillar superconducting-magnetic hybrid Josephson junctions

Authors: Burm Baek, William H. Rippard, Matthew R. Pufall, Samuel P. Benz, Stephen E. Russek, Horst Rogalla, Paul D. Dresselhaus

Abstract: The combination of superconducting and magnetic materials to create novel superconducting devices has been motivated by the discovery of Josephson critical current (Ics) oscillations as a function of magnetic layer thickness and the demonstration of devices with switchable critical currents. However, none of the hybrid devices have shown any spintronic effects, such as spin-transfer torque, which… ▽ More The combination of superconducting and magnetic materials to create novel superconducting devices has been motivated by the discovery of Josephson critical current (Ics) oscillations as a function of magnetic layer thickness and the demonstration of devices with switchable critical currents. However, none of the hybrid devices have shown any spintronic effects, such as spin-transfer torque, which are currently used in room-temperature magnetic devices, including spin-transfer torque random-access memory and spin-torque nano-oscillators. We have developed nanopillar Josephson junctions with a minimum feature size of 50 nm and magnetic barriers exhibiting magnetic pseudo-spin-valve behavior at 4 K. These devices allow current-induced magnetization switching that results in 20-fold changes in Ics. The current-induced magnetic switching is consistent with spin-transfer torque models for room-temperature magnetic devices. Our work demonstrates that devices that combine superconducting and spintronic functions show promise for the development of a nanoscale, nonvolatile, cryogenic memory technology. △ Less

Submitted 16 October, 2014; originally announced October 2014.

Journal ref: Phys. Rev. Appl. 3 (2015) 011001

Sensitivity of Double-Sided Split Ring Resonator Arrays to Fabrication Tolerances

Authors: Frank Trang, Edward F. Kuester, Horst Rogalla, Zoya Popovic

Abstract: We present a study of the effects of fabrication tolerances on the performance of a planar array of double-sided split-ring resonators, printed on two sides of a dielectric substrate and fabricated using a printed circuit board (PCB) milling machine. The array is simulated and measured in an X-band waveguide, and the measured resonant frequency is found to be 6.3% higher than the predicted one. Th… ▽ More We present a study of the effects of fabrication tolerances on the performance of a planar array of double-sided split-ring resonators, printed on two sides of a dielectric substrate and fabricated using a printed circuit board (PCB) milling machine. The array is simulated and measured in an X-band waveguide, and the measured resonant frequency is found to be 6.3% higher than the predicted one. The sensitivity of the frequency response to several possible fabrication and measurement errors is investigated, and the dominant effect identified and demonstrated experimentally and in simulation. △ Less

Submitted 17 July, 2012; originally announced July 2012.

An Electronic Measurement of the Boltzmann Constant

Authors: Samuel P. Benz, Alessio Pollarolo, Jifeng Qu, Horst Rogalla, Chiharu Urano, Weston L. Tew, Paul D. Dresselhaus, D. Rod White

Abstract: The Boltzmann constant was measured by comparing the Johnson noise of a resistor at the triple point of water with a quantum-based voltage reference signal generated with a superconducting Josephson-junction waveform synthesizer. The measured value of k = 1.380651(18) \times 10^-23 J/K is consistent with the current CODATA value and the combined uncertainties. This is our first measurement of k wi… ▽ More The Boltzmann constant was measured by comparing the Johnson noise of a resistor at the triple point of water with a quantum-based voltage reference signal generated with a superconducting Josephson-junction waveform synthesizer. The measured value of k = 1.380651(18) \times 10^-23 J/K is consistent with the current CODATA value and the combined uncertainties. This is our first measurement of k with this electronic technique, and the first noise thermometry measurement to achieve a relative combined uncertainty of 13 parts in 10^6. We describe the most recent improvements to our Johnson Noise Thermometer that enabled the statistical uncertainty contribution to be reduced to seven parts in 10^6, as well as the further reduction of spurious systematic errors and EMI effects. The uncertainty budget for this measurement is discussed in detail. △ Less

Submitted 31 December, 2010; originally announced January 2011.

Comments: 23 pages, 7 figures

Vortex Trap** in Hybrid Magnetometers

Authors: K. H. Kuit, J. R. Kirtley, H. Rogalla, J. Flokstra

Abstract: Hybrid magnetometers based on a normal conducting sensor and a superconducting flux concentrator have been investigated. When this sensor is operated in an unshielded environment flux vortices can be trapped in the superconducting body when the sensor is cooled. Thermal hop** of the trapped vortices gives rise to 1/f noise. The mechanism for vortex trap** has been investigated. A new model f… ▽ More Hybrid magnetometers based on a normal conducting sensor and a superconducting flux concentrator have been investigated. When this sensor is operated in an unshielded environment flux vortices can be trapped in the superconducting body when the sensor is cooled. Thermal hop** of the trapped vortices gives rise to 1/f noise. The mechanism for vortex trap** has been investigated. A new model for the critical field for vortex trap** and vortex densities has been derived. Experimental verification on YBa2Cu3O7-delta (YBCO) strips with a Scanning SQUID Microscope shows very good agreement between measurements and the new theory. The results have been applied in a hybrid magnetometer design based on a bismuth Hall sensor and an YBCO flux concentrator. Measurements show a field gain up to G=7 with a large effective range of 175uT. △ Less

Submitted 18 September, 2008; originally announced September 2008.

Vortex trap** and expulsion in thin-film type-II superconducting strips

Authors: K. H. Kuit, J. R. Kirtley, J. R. Clem, H. Rogalla, J. Flokstra

Abstract: Vortex trap** is investigated in thin-film strips of superconducting material. We present a model for the critical field above which vortex trap** occurs in these strips. This model includes the pairing energy of vortex-antivortex pairs in addition to the energy of single vortices. Experimental verification of the model with a scanning SQUID microscope shows very good agreement between the m… ▽ More Vortex trap** is investigated in thin-film strips of superconducting material. We present a model for the critical field above which vortex trap** occurs in these strips. This model includes the pairing energy of vortex-antivortex pairs in addition to the energy of single vortices. Experimental verification of the model with a scanning SQUID microscope shows very good agreement between the model and experiments on YBa2Cu3O7-delta and Nb strips. Statistical analysis of the vortex distribution in the strips above the critical field has been performed and a comparison has been made between Nb and YBa2Cu3O7-delta for the distributions in the lateral and longitudinal directions. △ Less

Submitted 17 September, 2008; originally announced September 2008.

Vortex trap** and expulsion in thin-film YBCO strips

Authors: K. H. Kuit, J. R. Kirtley, W. van der Veur, C. G. Molenaar, F. J. G. Roesthuis, A. G. P. Troeman, J. R. Clem, H. Hilgenkamp, H. Rogalla, J. Flokstra

Abstract: A scanning SQUID microscope was used to image vortex trap** as a function of the magnetic induction during cooling in thin-film YBCO strips for strip widths W from 2 to 50 um. We found that vortices were excluded from the strips when the induction Ba was below a critical induction Bc. We present a simple model for the vortex exclusion process which takes into account the vortex - antivortex pa… ▽ More A scanning SQUID microscope was used to image vortex trap** as a function of the magnetic induction during cooling in thin-film YBCO strips for strip widths W from 2 to 50 um. We found that vortices were excluded from the strips when the induction Ba was below a critical induction Bc. We present a simple model for the vortex exclusion process which takes into account the vortex - antivortex pair production energy as well as the vortex Meissner and self-energies. This model predicts that the real density n of trapped vortices is given by n=(Ba-BK)/Phi0 with BK = 1.65Phi0/W^2 and Phi0 = h/2e the superconducting flux quantum. This prediction is in good agreement with our experiments on YBCO, as well as with previous experiments on thin-film strips of niobium. We also report on the positions of the trapped vortices. We found that at low densities the vortices were trapped in a single row near the centers of the strips, with the relative intervortex spacing distribution width decreasing as the vortex density increased, a sign of longitudinal ordering. The critical induction for two rows forming in the 35 um wide strip was (2.89 + 1.91-0.93)Bc, consistent with a numerical prediction. △ Less

Submitted 15 January, 2008; originally announced January 2008.

Experiments using high-Tc/low-Tc Josephson contacts

Authors: Ariando, H. J. H. Smilde, C. J. M. Verwijs, G. Rijnders, D. H. A. Blank, H. Rogalla, J. R. Kirtley, C. C. Tsuei, H. Hilgenkamp

Abstract: Remarkably rich physics is involved in the behavior of hybrid Josephson junctions, connecting high-Tc and low-Tc superconductors. This relates in particular to the different order parameter symmetries underlying the formation of the superconducting states in these materials. Experiments on high-Tc/low-Tc contacts have also played a crucial role in settling the decade-long d-wave versus s-wave de… ▽ More Remarkably rich physics is involved in the behavior of hybrid Josephson junctions, connecting high-Tc and low-Tc superconductors. This relates in particular to the different order parameter symmetries underlying the formation of the superconducting states in these materials. Experiments on high-Tc/low-Tc contacts have also played a crucial role in settling the decade-long d-wave versus s-wave debate in cuprate superconductors. Recently, such hybrid junctions have enabled more detailed pairing symmetry tests. Furthermore, with these junctions, complex arrays of pi-rings have been realized, enabling studies on spontaneously generated fractional flux quanta and their mutual interactions. Steps toward novel superconducting electronic devices are taken, utilizing the phase-shifts inherent to the d-wave superconducting order parameter. This paper is intended to reflect the current status of experiments using high-Tc and low-Tc Josephson contacts. △ Less

Submitted 11 August, 2006; v1 submitted 9 June, 2006; originally announced June 2006.

Comments: 25 pages, 10 figures, to appear in "Electron Correlation in New Materials and Nanosystems", NATO Science Series II, Springer, 2006

Admixtures to d-wave gap symmetry in untwinned YBa2Cu3O7 superconducting films measured by angle-resolved electron tunneling

Authors: H. J. H. Smilde, A. A. Golubov, Ariando, G. Rijnders, J. M. Dekkers, S. Harkema, D. H. A. Blank, H. Rogalla, H. Hilgenkamp

Abstract: We report on an \textit{ab}-anisotropy of $J_{c \parallel b}/J_{c \parallel a}% \cong 1.8$ and $I_{c}R_{n \parallel b}/I_{c}R_{n \parallel a}\cong 1.2$ in ramp-edge junctions between untwinned YBa$_{2}$Cu$_{3}$O$_{7}$ and $s$% -wave Nb. For these junctions, the angle $θ$ with the YBa$_{2}$Cu$_{3}$O$_{7}$ crystal b-axis is varied as a single parameter. The $R_{n}$A($θ$)-dependence presents 2-fold… ▽ More We report on an \textit{ab}-anisotropy of $J_{c \parallel b}/J_{c \parallel a}% \cong 1.8$ and $I_{c}R_{n \parallel b}/I_{c}R_{n \parallel a}\cong 1.2$ in ramp-edge junctions between untwinned YBa$_{2}$Cu$_{3}$O$_{7}$ and $s$% -wave Nb. For these junctions, the angle $θ$ with the YBa$_{2}$Cu$_{3}$O$_{7}$ crystal b-axis is varied as a single parameter. The $R_{n}$A($θ$)-dependence presents 2-fold symmetry. The minima in $I_{c}R_{n}$ at $θ\cong 50^{\circ}$ suggest a real s-wave subdominant component and negligible $d_{xy}$-wave or imaginary s-wave admixtures. The $I_{c}R_{n}$($θ$)-dependence is well-fitted by 83% $d_{x^{2}-y^{2}}$-, 15% isotropic $s$- and 2% anisotropic s-wave order parameter symmetry, consistent with $Δ_{b}/Δ_{a} \cong 1.5$. △ Less

Submitted 26 October, 2005; originally announced October 2005.

Comments: 4 pages, 3 figures, to be published in Physical Review Letters

Phase-sensitive order parameter symmetry test experiments utilizing Nd2-xCexCuO4-y/Nb zigzag junctions

Authors: Ariando, D. Darminto, H. -J. H. Smilde, V. Leca, D. H. A. Blank, H. Rogalla, H. Hilgenkamp

Abstract: Phase-sensitive order parameter symmetry test experiments are presented on the electron-doped high-T_c cuprate Nd2-xCexCuO4-y. These experiments have been conducted using zigzag-shaped thin film Josephson structures, in which the Nd2-xCexCuO4-y is connected to the low-T_c superconductor Nb via a Au barrier layer. For the optimally doped as well as for the overdoped Nd2-xCexCuO4-y a clear predomi… ▽ More Phase-sensitive order parameter symmetry test experiments are presented on the electron-doped high-T_c cuprate Nd2-xCexCuO4-y. These experiments have been conducted using zigzag-shaped thin film Josephson structures, in which the Nd2-xCexCuO4-y is connected to the low-T_c superconductor Nb via a Au barrier layer. For the optimally doped as well as for the overdoped Nd2-xCexCuO4-y a clear predominant dx2-y2-wave behavior is observed at T=4.2K. Both compounds were also investigated at T=1.6K, presenting no indications for a change to a predominant s-wave symmetry with decreasing temperature. △ Less

Submitted 17 March, 2005; originally announced March 2005.

Comments: Accepted for publication in Phys. Rev. Lett., 4 pages, 4 figures

Critical temperature of superconducting bilayers: theory and experiment

Authors: G. Brammertz, A. A. Golubov, P. Verhoeve, R. den Hartog, A. Peacock, H. Rogalla

Abstract: A generalized model for the critical temperature Tc of superconducting bilayers is presented, which is valid with no restrictions to film thicknesses, Tc of the layers and interface resistivity. The model is verified experimentally on a series of Nb-Al and Ta-Al bilayers with Nb, Ta layer thicknesses of 100 nm and Al layer thicknesses ranging from 5 nm to 200 nm. Excellent agreement between theo… ▽ More A generalized model for the critical temperature Tc of superconducting bilayers is presented, which is valid with no restrictions to film thicknesses, Tc of the layers and interface resistivity. The model is verified experimentally on a series of Nb-Al and Ta-Al bilayers with Nb, Ta layer thicknesses of 100 nm and Al layer thicknesses ranging from 5 nm to 200 nm. Excellent agreement between theory and experiment was found for the energy gap and the Tc of bilayers. The results are important for designing practical superconducting devices. △ Less

Submitted 13 July, 2004; originally announced July 2004.

Comments: 3 pages, 2 figures

Journal ref: Appl. Phys. Lett. 80, 2955, 2002

Energy-dependent kinetic model of photon absorption by superconducting tunnel junctions

Authors: G. Brammertz, A. G. Kozorezov, J. K. Wigmore, R. den Hartog, P. Verhoeve, D. Martin, A. Peacock, A. A. Golubov, H. Rogalla

Abstract: We describe a model for photon absorption by superconducting tunnel junctions in which the full energy dependence of all the quasiparticle dynamic processes is included. The model supersedes the well-known Rothwarf-Taylor approach, which becomes inadequate for a description of the small gap structures that are currently being developed for improved detector resolution and responsivity. In these… ▽ More We describe a model for photon absorption by superconducting tunnel junctions in which the full energy dependence of all the quasiparticle dynamic processes is included. The model supersedes the well-known Rothwarf-Taylor approach, which becomes inadequate for a description of the small gap structures that are currently being developed for improved detector resolution and responsivity. In these junctions relaxation of excited quasiparticles is intrinsically slow so that the energy distribution remains very broad throughout the whole detection process. By solving the energy-dependent kinetic equations describing the distributions, we are able to model the temporal and spectral evolution of the distribution of quasiparticles initially generated in the photo-absorption process. Good agreement is obtained between the theory and experiment. △ Less

Submitted 13 July, 2004; originally announced July 2004.

Comments: 25 pages, 15 figures

Journal ref: J. Appl. Phys. 94, 5854, 2003

A generalized proximity effect model in superconducting bi- and tri-layer films

Authors: G. Brammertz, A. Poelaert, A. A. Golubov, P. Verhoeve, A. Peacock, H. Rogalla

Abstract: This paper presents a general model for calculating the density of states and the Cooper pair potential in proximity coupled superconducting bi- and tri-layer films. The typical example of superconducting tunnel junctions is used to show that the model is working. This paper presents a general model for calculating the density of states and the Cooper pair potential in proximity coupled superconducting bi- and tri-layer films. The typical example of superconducting tunnel junctions is used to show that the model is working. △ Less

Submitted 13 July, 2004; originally announced July 2004.

Comments: 25 pages, 6 figures

Journal ref: J. Appl. Phys. 90, 1, pp. 355-364, 2001

Microscopic nonequilibrium theory of double-barrier Josephson junctions

Authors: A. Brinkman, A. A. Golubov, H. Rogalla, F. K. Wilhelm, M. Yu. Kupriyanov

Abstract: We study nonequilibrium charge transport in a double-barrier Josephson junction, including nonstationary phenomena, using the time-dependent quasiclassical Keldysh Green's function formalism. We supplement the kinetic equations by appropriate time-dependent boundary conditions and solve the time-dependent problem in a number of regimes. From the solutions, current-voltage characteristics are der… ▽ More We study nonequilibrium charge transport in a double-barrier Josephson junction, including nonstationary phenomena, using the time-dependent quasiclassical Keldysh Green's function formalism. We supplement the kinetic equations by appropriate time-dependent boundary conditions and solve the time-dependent problem in a number of regimes. From the solutions, current-voltage characteristics are derived. It is understood why the quasiparticle current can show excess current as well as deficit current and how the subgap conductance behaves as function of junction parameters. A time-dependent nonequilibrium contribution to the distribution function is found to cause a non-zero averaged supercurrent even in the presence of an applied voltage. Energy relaxation due to inelastic scattering in the interlayer has a prominent role in determining the transport properties of double-barrier junctions. Actual inelastic scattering parameters are derived from experiments. It is shown as an application of the microscopic model, how the nature of the intrinsic shunt in double-barrier junctions can be explained in terms of energy relaxation and the opening of Andreev channels. △ Less

Submitted 17 October, 2003; originally announced October 2003.

Comments: Accepted for Phys. Rev. B

Multiband model for tunneling in MgB2 junctions

Authors: A. Brinkman, A. A. Golubov, H. Rogalla, O. V. Dolgov, J. Kortus, Y. Kong, O. Jepsen, O. K. Andersen

Abstract: A theoretical model for quasiparticle and Josephson tunneling in multiband superconductors is developed and applied to MgB2-based junctions. The gap functions in different bands in MgB2 are obtained from an extended Eliashberg formalism, using the results of band structure calculations. The temperature and angle dependencies of MgB2 tunneling spectra and the Josephson critical current are calcul… ▽ More A theoretical model for quasiparticle and Josephson tunneling in multiband superconductors is developed and applied to MgB2-based junctions. The gap functions in different bands in MgB2 are obtained from an extended Eliashberg formalism, using the results of band structure calculations. The temperature and angle dependencies of MgB2 tunneling spectra and the Josephson critical current are calculated. The conditions for observing one or two gaps are given. We argue that the model may help to settle the current debate concerning two-band superconductivity in MgB2. △ Less

Submitted 13 May, 2002; v1 submitted 7 November, 2001; originally announced November 2001.

Comments: minor corrections, published in Phys. Rev. B 65, 180517(R) (2002)

Superconducting Quantum Interference Device based on MgB2 nanobridges

Authors: A. Brinkman, D. Veldhuis, D. Mijatovic, G. Rijnders, D. H. A. Blank, H. Hilgenkamp, H. Rogalla

Abstract: The recently discovered superconductor MgB2, with a transition temperature of 39K, has significant potential for future electronics. An essential step is the achievement of Josephson circuits, of which the superconducting quantum interference device (SQUID) is the most important. Here, we report Josephson quantum interference in superconducting MgB2 thin films. Modulation voltages of up to 30 mi… ▽ More The recently discovered superconductor MgB2, with a transition temperature of 39K, has significant potential for future electronics. An essential step is the achievement of Josephson circuits, of which the superconducting quantum interference device (SQUID) is the most important. Here, we report Josephson quantum interference in superconducting MgB2 thin films. Modulation voltages of up to 30 microvolt are observed in an all-MgB2 SQUID, based on focused ion beam patterned nanobridges. These bridges, with a length scale < 100 nm, have outstanding critical current densities of 7 x 10^6 A/cm2 at 4.2 K. △ Less

Submitted 28 May, 2001; originally announced May 2001.

Comments: submitted to Appl. Phys. Lett

Superconducting Mg-B films by pulsed laser deposition in an in-situ two-step process using multi-component targets

Authors: D. H. A. Blank, H. Hilgenkamp, A. Brinkman, D. Mijatovic, G. Rijnders, H. Rogalla

Abstract: Superconducting thin films have been prepared in a two-step in-situ process, using the Mg-B plasma generated by pulsed laser ablation. The target was composed of a mixture of Mg and MgB2 powders to compensate for the volatility of Mg and therefore to ensure a high Mg content in the film. The films were deposited at temperatures ranging from room temperature to 300 degrees C followed by a low-pre… ▽ More Superconducting thin films have been prepared in a two-step in-situ process, using the Mg-B plasma generated by pulsed laser ablation. The target was composed of a mixture of Mg and MgB2 powders to compensate for the volatility of Mg and therefore to ensure a high Mg content in the film. The films were deposited at temperatures ranging from room temperature to 300 degrees C followed by a low-pressure in-situ annealing procedure. Various substrates have been used and diverse ways to increase the Mg content into the film were applied. The films show a sharp transition in the resistance and have a zero resistance transition temperature of 22-24 K. △ Less

Submitted 26 March, 2001; originally announced March 2001.

Comments: 4 pages, 3 figures, submitted to Applied Physics Letters

Superconducting thin films of MgB2 on (001)-Si by pulsed laser deposition

Authors: A. Brinkman, D. Mijatovic, G. Rijnders, V. Leca, H. J. H. Smilde, I. Oomen, A. A. Golubov, F. Roesthuis, S. Harkema, H. Hilgenkamp, D. H. A. Blank, H. Rogalla

Abstract: Superconducting thin films have been prepared on Si-substrates, using pulsed laser deposition from a target composed of a mixture of Mg and MgB2 powders. The films were deposited at room temperature and post-annealed at 600 degrees C. The zero resistance transition temperatures were 12 K, with an onset transition temperature of 27 K. Special care has been taken to avoid oxidation of Mg in the la… ▽ More Superconducting thin films have been prepared on Si-substrates, using pulsed laser deposition from a target composed of a mixture of Mg and MgB2 powders. The films were deposited at room temperature and post-annealed at 600 degrees C. The zero resistance transition temperatures were 12 K, with an onset transition temperature of 27 K. Special care has been taken to avoid oxidation of Mg in the laser plasma and deposited film, by optimizing the background pressure of Ar gas in the deposition chamber. For this the optical emission in the visible range from the plasma has been used as indicator. Preventing Mg from oxidation was found to be essential to obtain superconducting films. △ Less

Submitted 8 March, 2001; originally announced March 2001.

GRAIL, an omni-directional gravitational wave detector

Authors: D. v. Albada, W. v. Amersfoort, H. Boer Rookhuizen, J. Flokstra, G. Frossati, H. v. d. Graaf, A. Heijboer, G. Heijboer, E. v. d. Heuvel, J. W. v. Holten, G. J. Nooren, J. Oberski, H. Rogalla, A. de Waele, P. de Witt Huberts

Abstract: A cryogenic spherical and omni-directional resonant-mass detector proposed by the GRAIL collaboration is described. A cryogenic spherical and omni-directional resonant-mass detector proposed by the GRAIL collaboration is described. △ Less

Submitted 27 April, 1998; originally announced April 1998.

Comments: 5 pages, 4 figs., contribution to proceedings GW Data Analysis Workshop, Paris, nov. 1997

Report number: NIKHEF/98-009