-
AGATA DAQ-box: a unified data acquisition system for different experimental conditions
Authors:
Amel Korichi,
Emmanuel Clément,
Nicolas Dosme,
Eric Legay,
Olivier Stézowski,
Alain Goasduff,
Yann Aubert,
Jéremie Dudouet,
Souhir Elloumi,
Phillipe Gauron,
Xavier Grave,
Michele Gulmini,
Jéremie Jacob,
Vincent Lafage,
Patrick Le Jeannic,
Guillaume Lalaire,
Joa Ljungvall,
Clothilde Maugeais,
Caterina Michelagnoli,
Roméo Molini,
Guillaume Philippon,
Stephane Pietri,
Damian Ralet,
Marco Roetta,
Frederic Saillant
, et al. (2 additional authors not shown)
Abstract:
The AGATA tracking detector array represents a significant improvement over previous Compton suppressed arrays. The construction of AGATA led to numerous technological breakthroughs in order to meet the requirements and the challenges of building a mobile detector across Europe. This paper focuses on the design and implementation of the data acquisition system responsible of the readout and contro…
▽ More
The AGATA tracking detector array represents a significant improvement over previous Compton suppressed arrays. The construction of AGATA led to numerous technological breakthroughs in order to meet the requirements and the challenges of building a mobile detector across Europe. This paper focuses on the design and implementation of the data acquisition system responsible of the readout and control of the germanium detectors of AGATA. Our system is highly versatile, capable of instrumenting AGATA and seamlessly adapting it to various configurations with a wide range of ancillary detectors and/or spectrometers. It consists of three main components: an autonomous and independent infrastructure, a dedicated application core ensuring overall consistency, and a high--performance software package providing a fully integrated data flow management including the setting-up, the supervision and the slow control of the instrument. In this paper, we present a comprehensive analysis of the system's design and performance, particularly under high-counting rate conditions.
△ Less
Submitted 21 July, 2023; v1 submitted 29 May, 2023;
originally announced May 2023.
-
One-pot synthesis: a simple and fast method to obtain ceramic superconducting materials
Authors:
Maycon Rotta,
Maycon Motta,
Alexsander L Pessoa,
Claudio L Carvalho,
Cesar V Deimling,
Paulo N Lisboa-Filho,
Wilson A Ortiz,
Rafael Zadorosny
Abstract:
The one-pot method focuses on the reduction of the number of steps or chemical reactions in the synthesis of materials, and it is very appealing in terms of sustainability. In addition to this point of view, superconductors are desired materials due to their unusual properties, such as the zero resistivity and the perfect diamagnetism. One-pot, Thus, in this work, we described the one-pot synthesi…
▽ More
The one-pot method focuses on the reduction of the number of steps or chemical reactions in the synthesis of materials, and it is very appealing in terms of sustainability. In addition to this point of view, superconductors are desired materials due to their unusual properties, such as the zero resistivity and the perfect diamagnetism. One-pot, Thus, in this work, we described the one-pot synthesis of YBa2Cu3O7-δ superconducting ceramic. In just two steps and a few hours, a polymer composite solution was prepared, which originates a powder after burning the polymer out with pure phase and with superconducting properties better than those produced by other techniques.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Solution Blow Spinning Control of Morphology and Production Rate of Complex Superconducting YBa2Cu3O7-x Nanowires
Authors:
M. Rotta,
M. Motta,
A. L. Pessoa,
C. L. Carvalho,
W. A. Ortiz,
R. Zadorosny
Abstract:
The demand for nanostructured materials can increase exponentially due to the miniaturization of devices and their potential application in different areas, such as electronic and medicine. Therefore, high production rates are essential for making nanomaterials commercially available. When electrospinning (ES) and solution blow spinning (SBS) are employed for producing ceramic nanostructures, the…
▽ More
The demand for nanostructured materials can increase exponentially due to the miniaturization of devices and their potential application in different areas, such as electronic and medicine. Therefore, high production rates are essential for making nanomaterials commercially available. When electrospinning (ES) and solution blow spinning (SBS) are employed for producing ceramic nanostructures, the solution injection rate can influence the morphology without, however, supply the real ceramic production rate. In this work, complex superconducting YBa2Cu3O7-x wires were prepared by using the SBS technique. We also show that the morphology can be controlled by varying the injection rate of the polymer solution and the production rate is 4.7 to 33 times higher than the rates of equivalent ceramics produced by ES. Additionally, we also suggest the term Ceramic Production Rate to refer to the production rate of ceramic structures.
△ Less
Submitted 5 April, 2019; v1 submitted 5 October, 2018;
originally announced October 2018.
-
YBCO Ceramic Nanofibers obtained by the new technique of Solution Blow Spinning
Authors:
M. Rotta,
L. Zadorosny,
C. L. Carvalho,
J. A. Malmonge,
L. F. Malmonge,
R. Zadorosny
Abstract:
This study proposes a novel solution blow spinning technique (SBS) for fabricating YBCO ceramic nanofibers. The precursor solutions were obtained from Y, Ba, and Cu metallic acetates (Ac) and poly(vinyl pyrrolidone) (PVP, Mw = 360,000). Ac:PVP concentrations of 1:1 and 5:1 were tested, resulting in ceramic nanofibers with average diameters of 359 and 375 nm, respectively. X-ray diffraction confirm…
▽ More
This study proposes a novel solution blow spinning technique (SBS) for fabricating YBCO ceramic nanofibers. The precursor solutions were obtained from Y, Ba, and Cu metallic acetates (Ac) and poly(vinyl pyrrolidone) (PVP, Mw = 360,000). Ac:PVP concentrations of 1:1 and 5:1 were tested, resulting in ceramic nanofibers with average diameters of 359 and 375 nm, respectively. X-ray diffraction confirmed the formation of a pure phase of YBa2Cu3O7-x. This is the first study to use SBS for fabricating YBCO nanofibers, and this technique shows promise for obtaining high-quality ceramic materials.
△ Less
Submitted 26 July, 2017;
originally announced July 2017.
