-
Determination of Calibration Parameters of Cantilevers of Arbitrary Shape by Finite Elements Analysis
Authors:
Jorge Rodriguez-Ramos,
Felix Rico
Abstract:
The use of atomic force microscopy on nanomechanical measurements requires accurate calibration of the cantilever's spring constant ($k_c$) and the optical lever sensitivity ($OLS$). The thermal method, based on the cantilever's thermal fluctuations in fluid, allows estimating $k_c$ in a fast, non-invasive mode. However, differences in the cantilever geometry and mounting angle require the knowled…
▽ More
The use of atomic force microscopy on nanomechanical measurements requires accurate calibration of the cantilever's spring constant ($k_c$) and the optical lever sensitivity ($OLS$). The thermal method, based on the cantilever's thermal fluctuations in fluid, allows estimating $k_c$ in a fast, non-invasive mode. However, differences in the cantilever geometry and mounting angle require the knowledge of three correction factors to get a good estimation of $k_c$: the contribution of the oscillation mode to the total amplitude, the shape difference between the free and the end-loaded configurations, and the tilt of the cantilever respect to the measured surface. While the correction factors for traditional rectangular and V-shaped cantilevers geometries have been reported, they must be determined for cantilevers with non-traditional geometries and large tips. Here, we develop a method based on finite element analysis to estimate the correction factors of cantilevers with arbitrary geometry and tip dimensions. The method relies on the numerical computation of the effective cantilever mass. The use of the correction factor for rectangular geometries on our model cantilever (PFQNM-LC) will lead to values underestimated by 16%. In contrast, experiments using pre-calibrated cantilevers revealed a maximum uncertainty below 5% in the estimation of the $OLS$, verifying our approach.
△ Less
Submitted 7 September, 2021; v1 submitted 23 October, 2020;
originally announced October 2020.
-
The TP3-WFS: a new guy in town
Authors:
Carlos Colodro-Conde,
Sergio Velasco,
Roberto López,
Alejandro Oscoz,
Yolanda Martín-Hernando,
Rafael Rebolo,
Antonio Pérez-Garrido,
Juan José Fernández-Valdivia,
Lucas Labadie,
Craig Mackay,
Marta Puga,
Gustavo Rodríguez-Coira,
Luis Fernando Rodríguez-Ramos,
José Manuel Rodríguez-Ramos
Abstract:
The TP3-WFS (Two Pupil Plane Positions Wavefront Sensor) is, to the best of the authors' knowledge, the first physical implementation of the geometrical wavefront reconstruction algorithm that has been tested in a telescope as part of an actual AO-enabled instrument. The main advantage of this algorithm is that it theoretically provides a fairly good reconstruction accuracy even under very low lev…
▽ More
The TP3-WFS (Two Pupil Plane Positions Wavefront Sensor) is, to the best of the authors' knowledge, the first physical implementation of the geometrical wavefront reconstruction algorithm that has been tested in a telescope as part of an actual AO-enabled instrument. The main advantage of this algorithm is that it theoretically provides a fairly good reconstruction accuracy even under very low levels of light, in the order of a few hundreds of photons. This paper presents the first control-related results obtained at the William Herschel Telescope (WHT). Such results demonstrate the feasibility of this novel WFS as part of a real-time AO control loop.
△ Less
Submitted 13 November, 2018;
originally announced November 2018.
-
Completing the puzzle: AOLI full-commissioning fresh results and AIV innovations
Authors:
Sergio Velasco,
Carlos Colodro-Conde,
Roberto L. López,
Alejandro Oscoz,
Juan J. F. Valdivia,
Rafael Rebolo,
Bruno Femenía,
David L. King,
Lucas Labadie,
Craig Mackay,
Balaji Muthusubramanian,
Antonio Pérez-Garrido,
Marta Puga,
Gustavo Rodríguez-Coira,
Luis F. Rodríguez-Ramos,
José M. Rodríguez-Ramos
Abstract:
The Adaptive Optics Lucky Imager (AOLI) is a new instrument designed to combine adaptive optics (AO) and lucky imaging (LI) techniques to deliver high spatial resolution in the visible, 20 mas, from ground-based telescopes. Here we present details of the integration and verification phases explaining the defiance that we have faced and the innovative and versatile solution of modular integration f…
▽ More
The Adaptive Optics Lucky Imager (AOLI) is a new instrument designed to combine adaptive optics (AO) and lucky imaging (LI) techniques to deliver high spatial resolution in the visible, 20 mas, from ground-based telescopes. Here we present details of the integration and verification phases explaining the defiance that we have faced and the innovative and versatile solution of modular integration for each of its subsystems that we have developed. Modularity seems a clue key for opto-mechanical integration success in the extremely-big telescopes era. We present here the very fresh preliminary results after its first fully-working observing run on the WHT.
△ Less
Submitted 27 March, 2017;
originally announced March 2017.
-
Laboratory and telescope demonstration of the TP3-WFS for the adaptive optics segment of AOLI
Authors:
C. Colodro-Conde,
S. Velasco,
J. J. F. Valdivia,
R. L. López,
A. Oscoz,
R. Rebolo,
B. Femenía,
D. L. King,
L. Labadie,
C. Mackay,
B. Muthusubramanian,
A. Pérez Garrido,
M. Puga,
G. Rodríguez-Coira,
L. F. Rodríguez-Ramos,
J. M. Rodríguez-Ramos,
R. Toledo-Moreo,
I. Villó-Pérez
Abstract:
AOLI (Adaptive Optics Lucky Imager) is a state-of-art instrument that combines adaptive optics (AO) and lucky imaging (LI) with the objective of obtaining diffraction limited images in visible wavelength at mid- and big-size ground-based telescopes. The key innovation of AOLI is the development and use of the new TP3-WFS (Two Pupil Plane Positions Wavefront Sensor). The TP3-WFS, working in visible…
▽ More
AOLI (Adaptive Optics Lucky Imager) is a state-of-art instrument that combines adaptive optics (AO) and lucky imaging (LI) with the objective of obtaining diffraction limited images in visible wavelength at mid- and big-size ground-based telescopes. The key innovation of AOLI is the development and use of the new TP3-WFS (Two Pupil Plane Positions Wavefront Sensor). The TP3-WFS, working in visible band, represents an advance over classical wavefront sensors such as the Shack-Hartmann WFS (SH-WFS) because it can theoretically use fainter natural reference stars, which would ultimately provide better sky coverages to AO instruments using this newer sensor. This paper describes the software, algorithms and procedures that enabled AOLI to become the first astronomical instrument performing real-time adaptive optics corrections in a telescope with this new type of WFS, including the first control-related results at the William Herschel Telescope (WHT).
△ Less
Submitted 28 January, 2017;
originally announced January 2017.
-
An instrumental puzzle: the modular integration of AOLI
Authors:
Roberto L. López,
Sergio Velasco,
Carlos Colodro-Conde,
Juan J. F. Valdivia,
Marta Puga,
Alejandro Oscoz,
Rafael Rebolo,
Craig Mackay,
Antonio Pérez-Garrido,
Luis Fernando Rodríguez-Ramos,
José M. Rodríguez-Ramos,
David King,
Lucas Labadie,
Balaji Muthusubramanian,
Gustavo Rodríguez-Coira
Abstract:
The Adaptive Optics Lucky Imager, AOLI, is an instrument developed to deliver the highest spatial resolution ever obtained in the visible, 20 mas, from ground-based telescopes. In AOLI a new philosophy of instrumental prototy** has been applied, based on the modularization of the subsystems. This modular concept offers maximum flexibility regarding the instrument, telescope or the addition of fu…
▽ More
The Adaptive Optics Lucky Imager, AOLI, is an instrument developed to deliver the highest spatial resolution ever obtained in the visible, 20 mas, from ground-based telescopes. In AOLI a new philosophy of instrumental prototy** has been applied, based on the modularization of the subsystems. This modular concept offers maximum flexibility regarding the instrument, telescope or the addition of future developments.
△ Less
Submitted 16 August, 2016;
originally announced August 2016.
-
AOLI: Near-diffraction limited imaging in the visible on large ground-based telescopes
Authors:
Craig Mackay,
Rafael Rebolo,
David King,
Lucas Labadie,
Marta Puga Antolin,
Antonio Garrido,
Carlos Colodro-Conde,
Roberto Lopez,
Balaji Muthusubramanian,
Alejandro Oscoz,
Jose Rodriguez-Ramos,
Luis Rodriquez-Ramos,
Jose Fernandez-Valdivia,
Sergio Velasco
Abstract:
The combination of Lucky Imaging with a low order adaptive optics system was demonstrated very successfully on the Palomar 5m telescope nearly 10 years ago. It is still the only system to give such high-resolution images in the visible or near infrared on ground-based telescope of faint astronomical targets. The development of AOLI for deployment initially on the WHT 4.2 m telescope in La Palma, C…
▽ More
The combination of Lucky Imaging with a low order adaptive optics system was demonstrated very successfully on the Palomar 5m telescope nearly 10 years ago. It is still the only system to give such high-resolution images in the visible or near infrared on ground-based telescope of faint astronomical targets. The development of AOLI for deployment initially on the WHT 4.2 m telescope in La Palma, Canary Islands, will be described in this paper. In particular, we will look at the design and status of our low order curvature wavefront sensor which has been somewhat simplified to make it more efficient, ensuring coverage over much of the sky with natural guide stars as reference object. AOLI uses optically butted electron multiplying CCDs to give an imaging array of 2000 x 2000 pixels.
△ Less
Submitted 10 August, 2016;
originally announced August 2016.