-
Isotropy of cosmic rays beyond $10^{20}$ eV favors their heavy mass composition
Authors:
Telescope Array Collaboration,
R. U. Abbasi,
Y. Abe,
T. Abu-Zayyad,
M. Allen,
Y. Arai,
R. Arimura,
E. Barcikowski,
J. W. Belz,
D. R. Bergman,
S. A. Blake,
I. Buckland,
B. G. Cheon,
M. Chikawa,
T. Fujii,
K. Fujisue,
K. Fujita,
R. Fujiwara,
M. Fukushima,
G. Furlich,
N. Globus,
R. Gonzalez,
W. Hanlon,
N. Hayashida,
H. He
, et al. (118 additional authors not shown)
Abstract:
We report an estimation of the injected mass composition of ultra-high energy cosmic rays (UHECRs) at energies higher than 10 EeV. The composition is inferred from an energy-dependent sky distribution of UHECR events observed by the Telescope Array surface detector by comparing it to the Large Scale Structure of the local Universe. In the case of negligible extra-galactic magnetic fields the resul…
▽ More
We report an estimation of the injected mass composition of ultra-high energy cosmic rays (UHECRs) at energies higher than 10 EeV. The composition is inferred from an energy-dependent sky distribution of UHECR events observed by the Telescope Array surface detector by comparing it to the Large Scale Structure of the local Universe. In the case of negligible extra-galactic magnetic fields the results are consistent with a relatively heavy injected composition at E ~ 10 EeV that becomes lighter up to E ~ 100 EeV, while the composition at E > 100 EeV is very heavy. The latter is true even in the presence of highest experimentally allowed extra-galactic magnetic fields, while the composition at lower energies can be light if a strong EGMF is present. The effect of the uncertainty in the galactic magnetic field on these results is subdominant.
△ Less
Submitted 3 July, 2024; v1 submitted 27 June, 2024;
originally announced June 2024.
-
Mass composition of ultra-high energy cosmic rays from distribution of their arrival directions with the Telescope Array
Authors:
Telescope Array Collaboration,
R. U. Abbasi,
Y. Abe,
T. Abu-Zayyad,
M. Allen,
Y. Arai,
R. Arimura,
E. Barcikowski,
J. W. Belz,
D. R. Bergman,
S. A. Blake,
I. Buckland,
B. G. Cheon,
M. Chikawa,
T. Fujii,
K. Fujisue,
K. Fujita,
R. Fujiwara,
M. Fukushima,
G. Furlich,
N. Globus,
R. Gonzalez,
W. Hanlon,
N. Hayashida,
H. He
, et al. (118 additional authors not shown)
Abstract:
We use a new method to estimate the injected mass composition of ultrahigh cosmic rays (UHECRs) at energies higher than 10 EeV. The method is based on comparison of the energy-dependent distribution of cosmic ray arrival directions as measured by the Telescope Array experiment (TA) with that calculated in a given putative model of UHECR under the assumption that sources trace the large-scale struc…
▽ More
We use a new method to estimate the injected mass composition of ultrahigh cosmic rays (UHECRs) at energies higher than 10 EeV. The method is based on comparison of the energy-dependent distribution of cosmic ray arrival directions as measured by the Telescope Array experiment (TA) with that calculated in a given putative model of UHECR under the assumption that sources trace the large-scale structure (LSS) of the Universe. As we report in the companion letter, the TA data show large deflections with respect to the LSS which can be explained, assuming small extra-galactic magnetic fields (EGMF), by an intermediate composition changing to a heavy one (iron) in the highest energy bin. Here we show that these results are robust to uncertainties in UHECR injection spectra, the energy scale of the experiment and galactic magnetic fields (GMF). The assumption of weak EGMF, however, strongly affects this interpretation at all but the highest energies E > 100 EeV, where the remarkable isotropy of the data implies a heavy injected composition even in the case of strong EGMF. This result also holds if UHECR sources are as rare as $2 \times 10^{-5}$ Mpc$^{-3}$, that is the conservative lower limit for the source number density.
△ Less
Submitted 3 July, 2024; v1 submitted 27 June, 2024;
originally announced June 2024.
-
Jacobian-Free Newton-Krylov method for multilevel NLTE radiative transfer problems
Authors:
D. Arramy,
J. de la Cruz Rodríguez,
J. Leenaarts
Abstract:
The calculation of the emerging radiation from a model atmosphere requires knowledge of the emissivity and absorption coefficients, which are proportional to the atomic level population densities of the levels involved in each transition. Due to the intricate interdependency of the radiation field and the physical state of the atoms, iterative methods are required in order to calculate the atomic…
▽ More
The calculation of the emerging radiation from a model atmosphere requires knowledge of the emissivity and absorption coefficients, which are proportional to the atomic level population densities of the levels involved in each transition. Due to the intricate interdependency of the radiation field and the physical state of the atoms, iterative methods are required in order to calculate the atomic level population densities. A variety of different methods have been proposed to solve this problem, which is known as the Non-Local Thermodynamical Equilibrium (NLTE) problem.
In this study we have developed a Jacobian-Free Newton-Krylov method (JFNK) to solve multi-level NLTE radiative transfer problems. Using the Rybicki & Hummer (1992) method as a reference (Rybicki, G. B. & Hummer, D. G. 1992, A&A, 262, 209), our results show that our JFNK solver can achieve up to a factor two speed up when using local approximate operators / preconditioners, while also achieving a lower residual error in the statistical equilibrium equations. Another advantage of this method is that the addition of charge conservation and partial redistribution effects should be straight forward.
Our method can help accelerating the calculation of the emerging spectra from numerical models and also the reconstruction of chromospheric datasets through NLTE inversions.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
A mathematical justification for nonlinear constitutive relations between stress and linearized strain
Authors:
K. R. Rajagopal,
C. Rodriguez
Abstract:
We present an asymptotic framework that rigorously generates nonlinear constitutive relations between stress and linearized strain for elastic bodies. Each of these relations arises as the leading order relationship satisfied by a one-parameter family of nonlinear constitutive relations between stress and nonlinear strain. The asymptotic parameter limits the overall range of strains that satisfy t…
▽ More
We present an asymptotic framework that rigorously generates nonlinear constitutive relations between stress and linearized strain for elastic bodies. Each of these relations arises as the leading order relationship satisfied by a one-parameter family of nonlinear constitutive relations between stress and nonlinear strain. The asymptotic parameter limits the overall range of strains that satisfy the corresponding constitutive relation in the one-parameter family while the stresses can remain large (relative to a fixed stress scale). This differs from classical linearized elasticity where a fixed constitutive relation is assumed, and the magnitude of the displacement gradient serves as the asymptotic parameter. Also unlike classical approaches, the constitutive relations in our framework are expressed as implicit relationships between stress and strain rather than requiring stress explicitly expressed as a function of strain, adding conceptual simplicity and versatility. We demonstrate that our framework rigorously justifies nonlinear constitutive relations between stress and linearized strain including those with density-dependent Young's moduli or derived from strain energies beyond quadratic forms.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
From Young Massive Clusters to Old Globular Clusters: Density Profile Evolution and IMBH Formation
Authors:
Kuldeep Sharma,
Carl L. Rodriguez
Abstract:
The surface brightness profiles of globular clusters are conventionally described with the well-known King profile. However, observations of young massive clusters (YMCs) in the local Universe suggest that they are better fit by simple models with flat central cores and simple power-law densities in their outer regions (such as the Elson-Fall-Freeman, or EFF, profile). Depending on their initial c…
▽ More
The surface brightness profiles of globular clusters are conventionally described with the well-known King profile. However, observations of young massive clusters (YMCs) in the local Universe suggest that they are better fit by simple models with flat central cores and simple power-law densities in their outer regions (such as the Elson-Fall-Freeman, or EFF, profile). Depending on their initial central density, these YMCs may also facilitate large numbers of stellar collisions, potentially creating very massive stars that will directly collapse to intermediate-mass black holes (IMBHs). Using Monte Carlo $N$-body models of YMCs, we show that EFF-profile clusters transform to Wilson or King profiles through natural dynamical evolution, but that their final $W_0$ parameters do not strongly correlate to their initial concentrations. The most centrally-dense YMCs can produce runaway stellar mergers as massive as $4000\,M_{\odot}$ (the largest resolved mass in our simulations) which can collapse to produce IMBHs of similar masses. In doing so, these runaway collisions also deplete the clusters of their primordial massive stars, reducing the number of stellar-mass BHs by as much as $\sim$ 40\%. This depletion will accelerate the core collapse of clusters, suggesting that the process of IMBH formation itself may produce the high densities observed in some core-collapsed clusters.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Humboldt Highway II -- computer cluster on renewable energies
Authors:
Danyer Perez Adan,
Luis Ignacio Estevez Banos,
Tony Cass,
Bjoern Felkers,
Fernando Guzman,
Thomas Hartmann,
Beate Heinemann,
Hannes Jung,
Yves Kemp,
Frank Lehner,
Jürgen Nicklaus,
David Gutierrez Menendez,
Sandra Consuegra Rodriguez,
Cesar Garcia Trapaga,
Lidice Vaillant,
Rodney Walker
Abstract:
In August 2023, IT experts and scientists came together for a workshop to discuss the possibilities of building a computer cluster fully on renewable energies, as a test-case at Havana University in Cuba. The discussion covered the scientific needs for a computer cluster for particle physics at the InSTEC institute at Havana University, the possibilities to use solar energy, new developments in co…
▽ More
In August 2023, IT experts and scientists came together for a workshop to discuss the possibilities of building a computer cluster fully on renewable energies, as a test-case at Havana University in Cuba. The discussion covered the scientific needs for a computer cluster for particle physics at the InSTEC institute at Havana University, the possibilities to use solar energy, new developments in computing technologies, and computer cluster operation as well as operational needs for computing in particle physics. This computer cluster on renewable energies at the InSTEC institute is seen as a prototype for a large-scale computer cluster on renewable energies for scientific computing in the Caribbean, hosted in Cuba. The project is called "Humboldt Highway", to remember Alexander von Humboldt's achievements in bringing cultures of the American and European continents closer together by exchange and travel. In this spirit, we propose a project that enables and intensifies the scientific exchange between research laboratories and universities in Europe and the Caribbean, in particular Cuba.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
One-dimensional, geometrically stratified semi-empirical models of the quiet-Sun photosphere and lower chromosphere
Authors:
J. M. Borrero,
I. Milic,
A. Pastor Yabar,
A. J. Kaithakkal,
J. de la Cruz Rodriguez
Abstract:
One-dimensional, semi-empirical models of the solar atmosphere are widely employed in numerous contexts within solar physics, ranging from the determination of element abundances and atomic parameters to studies of the solar irradiance and from Stokes inversions to coronal extrapolations. These models provide the physical parameters (i.e. temperature, gas pressure, etc.) in the solar atmosphere as…
▽ More
One-dimensional, semi-empirical models of the solar atmosphere are widely employed in numerous contexts within solar physics, ranging from the determination of element abundances and atomic parameters to studies of the solar irradiance and from Stokes inversions to coronal extrapolations. These models provide the physical parameters (i.e. temperature, gas pressure, etc.) in the solar atmosphere as a function of the continuum optical depth $τ_{\rm c}$. The transformation to the geometrical $z$ scale (i.e. vertical coordinate) is provided via vertical hydrostatic equilibrium. Our aim is to provide updated, one-dimensional, semi-empirical models of the solar atmosphere as a function of $z,$ but employing the more general case of three-dimensional magneto-hydrostatic equilibrium (MHS) instead of vertical hydrostatic equilibrium (HE). We employed a recently developed Stokes inversion code that, along with non-local thermodynamic equilibrium effects, considers MHS instead of HE. This code is applied to spatially and temporally resolved spectropolarimetric observations of the quiet Sun obtained with the CRISP instrument attached to the Swedish Solar Telescope. We provide average models for granules, intergranules, dark magnetic elements, and overall quiet-Sun as a function of both $τ_{\rm c}$ and $z$ from the photosphere to the lower chromosphere. We demonstrate that, in these quiet-Sun models, the effect of considering MHS instead of HE is negligible. However, employing MHS increases the consistency of the inversion results before averaging. We surmise that in regions with stronger magnetic fields (i.e. pores, sunspots, network) the benefits of employing the magneto-hydrostatic approximation will be much more palpable.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Temporal True and Surrogate Fitness Landscape Analysis for Expensive Bi-Objective Optimisation
Authors:
C. J. Rodriguez,
S. L. Thomson,
T. Alderliesten,
P. A. N. Bosman
Abstract:
Many real-world problems have expensive-to-compute fitness functions and are multi-objective in nature. Surrogate-assisted evolutionary algorithms are often used to tackle such problems. Despite this, literature about analysing the fitness landscapes induced by surrogate models is limited, and even non-existent for multi-objective problems. This study addresses this critical gap by comparing lands…
▽ More
Many real-world problems have expensive-to-compute fitness functions and are multi-objective in nature. Surrogate-assisted evolutionary algorithms are often used to tackle such problems. Despite this, literature about analysing the fitness landscapes induced by surrogate models is limited, and even non-existent for multi-objective problems. This study addresses this critical gap by comparing landscapes of the true fitness function with those of surrogate models for multi-objective functions. Moreover, it does so temporally by examining landscape features at different points in time during optimisation, in the vicinity of the population at that point in time. We consider the BBOB bi-objective benchmark functions in our experiments. The results of the fitness landscape analysis reveals significant differences between true and surrogate features at different time points during optimisation. Despite these differences, the true and surrogate landscape features still show high correlations between each other. Furthermore, this study identifies which landscape features are related to search and demonstrates that both surrogate and true landscape features are capable of predicting algorithm performance. These findings indicate that temporal analysis of the landscape features may help to facilitate the design of surrogate switching approaches to improve performance in multi-objective optimisation.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Hydrogen embrittlement susceptibility of additively manufactured 316L stainless steel: influence of post-processing, printing direction, temperature and pre-straining
Authors:
G. Álvarez,
Z. Harris,
K. Wada,
C. Rodríguez,
E. Martínez-Pañeda
Abstract:
The influence of post-build processing on the hydrogen embrittlement behavior of additively manufactured (AM) 316L stainless steel fabricated using laser powder bed fusion was assessed at both room temperature and -50$^\circ$ C via uniaxial tensile experiments. In the absence of hydrogen at ambient temperature, all four evaluated AM conditions (as-built (AB), annealed (ANN), hot isostatic pressed…
▽ More
The influence of post-build processing on the hydrogen embrittlement behavior of additively manufactured (AM) 316L stainless steel fabricated using laser powder bed fusion was assessed at both room temperature and -50$^\circ$ C via uniaxial tensile experiments. In the absence of hydrogen at ambient temperature, all four evaluated AM conditions (as-built (AB), annealed (ANN), hot isostatic pressed (HIP), and HIP plus cold worked (CW) to 30\%) exhibit notably reduced ductility relative to conventionally manufactured (CM) 316L stainless steel. The AM material exhibits sensitivity to the build direction, both in the presence and absence of hydrogen, with a notable increase in yield strength in the X direction and enhanced ductility in the Z direction. Conversely, testing of non-charged specimens at -50$^\circ$ C revealed similar ductility between the CM, AB, ANN, and HIP conditions. Upon hydrogen charging, the ductility of all four AM conditions was found to be similar to that of CM 316L at ambient temperature, with the HIP condition actually exceeding the CM material. Critically, testing of hydrogen-charged samples at -50$^\circ$ C revealed that the ductility of the HIP AM 316L condition was nearly double that observed in the CM 316L. This improved performance persisted even after cold working, as the CW AM 316L exhibited comparable ductility to CM 316L at -50 C after hydrogen charging, despite having a 2-fold higher yield strength. Feritscope measurements suggest this increased performance is related to the reduced propensity for AM 316L to form strain-induced martensite during deformation, even after significant post-processing treatments. These results demonstrate that AM 316L can be post-processed using typical procedures to exhibit similar to or even improved resistance to hydrogen embrittlement relative to CM 316L.
△ Less
Submitted 14 November, 2023;
originally announced April 2024.
-
A Naive Model of Covid-19 Spread From A Dry Cough
Authors:
Cristian Ramirez Rodriguez
Abstract:
Health experts have suggested that social distancing measures are one of the most effective ways of preventing the spread of Covid-19. Research primarily focused on large Covid filled droplets suggested that these droplets can move further than regulated social distancing guidelines (2 meters apart) in the presence of wind. This project aims to model the paths of smaller Covid virions that last lo…
▽ More
Health experts have suggested that social distancing measures are one of the most effective ways of preventing the spread of Covid-19. Research primarily focused on large Covid filled droplets suggested that these droplets can move further than regulated social distancing guidelines (2 meters apart) in the presence of wind. This project aims to model the paths of smaller Covid virions that last longer in the air to see if they also move beyond social distancing norms in the presence of wind. By numerically solving a 2-dimensional Langevin equation for 3000 particles and modeling wind as one-dimensional and steady, velocities were found that translated into particles' positions. With wind, infectious doses of virions appeared to travel farther and faster, increasing the risk of infection before dispersion. The two-dimensional model given implies that social distancing norms are reasonable in cases with no wind, yet not conservative enough when there is wind.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
Influence of catastrophes and hidden dynamical symmetries on ultrafast backscattered photoelectrons
Authors:
T. Rook,
L. Cruz Rodriguez,
C. Figueira de Morisson Faria
Abstract:
We discuss the effect of using potentials with a Coulomb tail and different degrees of softening in the photoelectron momentum distributions (PMDs) using the recently implemented hybrid forward-boundary CQSFA (H-CQSFA). We show that introducing a softening in the Coulomb interaction influences the ridges observed in the PMDs associated with backscattered electron trajectories. In the limit of a ha…
▽ More
We discuss the effect of using potentials with a Coulomb tail and different degrees of softening in the photoelectron momentum distributions (PMDs) using the recently implemented hybrid forward-boundary CQSFA (H-CQSFA). We show that introducing a softening in the Coulomb interaction influences the ridges observed in the PMDs associated with backscattered electron trajectories. In the limit of a hard-core Coulomb interaction, the re-scattering ridges close along the polarization axis, while for a soft-core potential, they are interrupted at ridge-specific angles. We analyze the momentum map** of the different orbits leading to the ridges. For the hard-core potential, there exist two types of saddle-point solutions that coalesce at the ridge. By increasing the softening, we show that two additional solutions emerge as the result of breaking a hidden dynamical symmetry associated exclusively with the Coulomb potential. Further signatures of this symmetry breaking are encountered in subsets of momentum-space trajectories. Finally, we use scattering theory to show how the softening affects the maximal scattering angle and provide estimates that agree with our observations from the CQSFA. This implies that, in the presence of residual binding potentials in the electron's continuum propagation, the distinction between purely kinematic and dynamic caustics becomes blurred.
△ Less
Submitted 17 June, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Virtual Reality for Understanding Artificial-Intelligence-driven Scientific Discovery with an Application in Quantum Optics
Authors:
Philipp Schmidt,
Sören Arlt,
Carlos Ruiz-Gonzalez,
Xuemei Gu,
Carla Rodríguez,
Mario Krenn
Abstract:
Generative Artificial Intelligence (AI) models can propose solutions to scientific problems beyond human capability. To truly make conceptual contributions, researchers need to be capable of understanding the AI-generated structures and extracting the underlying concepts and ideas. When algorithms provide little explanatory reasoning alongside the output, scientists have to reverse-engineer the fu…
▽ More
Generative Artificial Intelligence (AI) models can propose solutions to scientific problems beyond human capability. To truly make conceptual contributions, researchers need to be capable of understanding the AI-generated structures and extracting the underlying concepts and ideas. When algorithms provide little explanatory reasoning alongside the output, scientists have to reverse-engineer the fundamental insights behind proposals based solely on examples. This task can be challenging as the output is often highly complex and thus not immediately accessible to humans. In this work we show how transferring part of the analysis process into an immersive Virtual Reality (VR) environment can assist researchers in develo** an understanding of AI-generated solutions. We demonstrate the usefulness of VR in finding interpretable configurations of abstract graphs, representing Quantum Optics experiments. Thereby, we can manually discover new generalizations of AI-discoveries as well as new understanding in experimental quantum optics. Furthermore, it allows us to customize the search space in an informed way - as a human-in-the-loop - to achieve significantly faster subsequent discovery iterations. As concrete examples, with this technology, we discover a new resource-efficient 3-dimensional entanglement swap** scheme, as well as a 3-dimensional 4-particle Greenberger-Horne-Zeilinger-state analyzer. Our results show the potential of VR for increasing a human researcher's ability to derive knowledge from graph-based generative AI that, which is a common abstract data representation used in diverse fields of science.
△ Less
Submitted 20 February, 2024;
originally announced March 2024.
-
A Survey for Radio Emission from White Dwarfs in the VLA Sky Survey
Authors:
Ingrid Pelisoli,
Laura Chomiuk,
Jay Strader,
T. R. Marsh,
Elias Aydi,
Kristen C. Dage,
Rebecca Kyer,
Isabella Molina,
Teresa Panurach,
Ryan Urquhart,
Thomas J. Maccarone,
R. Michael Rich,
Antonio C. Rodriguez,
E. Breedt,
A. J. Brown,
V. S. Dhillon,
M. J. Dyer,
Boris. T. Gaensicke,
J. A. Garbutt,
M. J. Green,
M. R. Kennedy,
P. Kerry,
S. P. Littlefair,
James Munday,
S. G. Parsons
Abstract:
Radio emission has been detected from tens of white dwarfs, in particular in accreting systems. Additionally, radio emission has been predicted as a possible outcome of a planetary system around a white dwarf. We searched for 3 GHz radio continuum emission in 846,000 candidate white dwarfs previously identified in Gaia using the Very Large Array Sky Survey (VLASS) Epoch 1 Quick Look Catalogue. We…
▽ More
Radio emission has been detected from tens of white dwarfs, in particular in accreting systems. Additionally, radio emission has been predicted as a possible outcome of a planetary system around a white dwarf. We searched for 3 GHz radio continuum emission in 846,000 candidate white dwarfs previously identified in Gaia using the Very Large Array Sky Survey (VLASS) Epoch 1 Quick Look Catalogue. We identified 13 candidate white dwarfs with a counterpart in VLASS within 2". Five of those were found not to be white dwarfs in follow-up or archival spectroscopy, whereas seven others were found to be chance alignments with a background source in higher-resolution optical or radio images. The remaining source, WDJ204259.71+152108.06, is found to be a white dwarf and M-dwarf binary with an orbital period of 4.1 days and long-term stochastic optical variability, as well as luminous radio and X-ray emission. For this binary, we find no direct evidence of a background contaminant, and a chance alignment probability of only ~2 per cent. However, other evidence points to the possibility of an unfortunate chance alignment with a background radio and X-ray emitting quasar, including an unusually poor Gaia DR3 astrometric solution for this source. With at most one possible radio emitting white dwarf found, we conclude that strong (> 1-3 mJy) radio emission from white dwarfs in the 3 GHz band is virtually nonexistent outside of interacting binaries.
△ Less
Submitted 14 May, 2024; v1 submitted 16 February, 2024;
originally announced February 2024.
-
Analysis of a kink pair model applied to a peierls mechanism in basal and prism plane slips in sapphire deformed between 200C and 1800C
Authors:
Miguel Castillo Rodríguez,
Jacques Castaing,
Antonio Muñoz Bernabé,
Patrick Veyssière,
Arturo Domínguez Rodríguez
Abstract:
A model based on dislocation glide controlled by the nucleation and propagation of kink pairs in a high Peierls stress crystal is revisited and modified to account for changes in dislocation densities and segment lengths with temperature and stress. It is applied to the critical resolved shear stress (CRSS) for basal and prism plane slip in sapphire (alpha-Al2O3). According to agreed-upon knowledg…
▽ More
A model based on dislocation glide controlled by the nucleation and propagation of kink pairs in a high Peierls stress crystal is revisited and modified to account for changes in dislocation densities and segment lengths with temperature and stress. It is applied to the critical resolved shear stress (CRSS) for basal and prism plane slip in sapphire (alpha-Al2O3). According to agreed-upon knowledge on dislocations in sapphire, basal slip and prism plane slip are modelled with undissociated and dissociated dislocations, respectively. In the latter case, partial dislocations move independently. Amongst a number of sets of fitting parameters, good fits between experimental and modelled CRSS9s are obtained in the long segment limit over the whole range of temperatures by making use of physically sound parameters, including a stress dependence of the dislocation density.
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
$α$-Al$_2$O$_3$ sapphire and rubies deformed by dual basal slip at intermediate temperatures (900C-1300$^\circ$C) -- II. dissociation and stacking faults
Authors:
M. Castillo Rodríguez,
J. Castaing,
A. Muñoz,
P. Veyssière,
A. Domínguez Rodríguez
Abstract:
Sapphire and rubies (undoped and Cr-doped $α$-Al$_2$O$_3$ single crystals) have been deformed in compression at temperatures lower than those previously used in studies of dislocations in the basal slip plane (see part I). Above 1400$^\circ$C, several features associating stacking faults out of the basal planes and partial dislocations (dissociation, faulted dipoles) have been observed in previous…
▽ More
Sapphire and rubies (undoped and Cr-doped $α$-Al$_2$O$_3$ single crystals) have been deformed in compression at temperatures lower than those previously used in studies of dislocations in the basal slip plane (see part I). Above 1400$^\circ$C, several features associating stacking faults out of the basal planes and partial dislocations (dissociation, faulted dipoles) have been observed in previous transmission electron microscope investigations. The formation of these features involves climb controlled by atomic diffusion. Properties of climb dissociated dislocations are discussed in relation with dislocation dynamics. TEM examination of dislocation structures at lower deformation temperatures (1000-1100$^\circ$C) shows that similar features are formed but that they often imply cross-slip. A new mechanism for the formation of faulted dipole by glide is presented and an explanation for the 30° Peierls valley orientation is proposed. The presence of chromium has a small influence on stacking fault energies on planes perpendicular to the basal plane.
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
Improved reconstruction of solar magnetic fields from imaging spectropolarimetry through spatio-temporal regularisation
Authors:
Jaime de la Cruz Rodríguez,
Jorrit Leenaarts
Abstract:
Determination of solar magnetic fields with a spatial resolution set by the diffraction limit of a telescope is difficult because the time required to measure the Stokes vector with sufficient signal-to-noise is long compared to the solar evolution timescale. This difficulty gets worse with increasing telescope size as the photon flux per diffraction-limited resolution element remains constant but…
▽ More
Determination of solar magnetic fields with a spatial resolution set by the diffraction limit of a telescope is difficult because the time required to measure the Stokes vector with sufficient signal-to-noise is long compared to the solar evolution timescale. This difficulty gets worse with increasing telescope size as the photon flux per diffraction-limited resolution element remains constant but the evolution timescale decreases linearly with the diffraction-limited resolution. We aim to improve magnetic field reconstruction at the diffraction limit without averaging the observations in time or space, and without applying noise filtering. The magnetic field vector tends to evolve slower than the temperature, velocity and microturbulence. We exploit this by adding temporal regularisation terms for the magnetic field to the linear least-squares fitting used in the weak-field approximation, as well as to the Levenberg-Marquardt algorithm used in inversions. The other model parameters are allowed to change in time without constraints. We infer the chromospheric magnetic field from Ca II 854.2 nm observations using the weak field approximation and the photospheric magnetic field from Fe I 617.3 nm observations using Milne-Eddington inversions, both with and without temporal regularisation. Temporal regularisation reduce the noise in the reconstructed maps of the magnetic field and provides a better coherency in time in both the weak-field approximation and Milne-Eddington inversions. Temporal regularisation markedly improves magnetic field determination from spatially and temporally resolved observations.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
Dramatic rebrightening of the type-changing stripped-envelope supernova SN 2023aew
Authors:
Yashvi Sharma,
Jesper Sollerman,
Shrinivas R. Kulkarni,
Takashi J. Moriya,
Steve Schulze,
Stan Barmentloo,
Michael Fausnaugh,
Avishay Gal-Yam,
Anders Jerkstrand,
Tomás Ahumada,
Eric C. Bellm,
Kaustav K. Das,
Andrew Drake,
Christoffer Fremling,
Saarah Hall,
K. R. Hinds,
Theophile Jegou du Laz,
Viraj Karambelkar,
Mansi M. Kasliwal,
Frank J. Masci,
Adam A. Miller,
Guy Nir,
Daniel A. Perley,
Josiah N. Purdum,
Yu-**g Qin
, et al. (10 additional authors not shown)
Abstract:
Multi-peaked supernovae with precursors, dramatic light-curve rebrightenings, and spectral transformation are rare, but are being discovered in increasing numbers by modern night-sky transient surveys like the Zwicky Transient Facility (ZTF). Here, we present the observations and analysis of SN 2023aew, which showed a dramatic increase in brightness following an initial luminous (-17.4 mag) and lo…
▽ More
Multi-peaked supernovae with precursors, dramatic light-curve rebrightenings, and spectral transformation are rare, but are being discovered in increasing numbers by modern night-sky transient surveys like the Zwicky Transient Facility (ZTF). Here, we present the observations and analysis of SN 2023aew, which showed a dramatic increase in brightness following an initial luminous (-17.4 mag) and long (~100 days) unusual first peak (possibly precursor). SN 2023aew was classified as a Type IIb supernova during the first peak but changed its type to resemble a stripped-envelope supernova (SESN) after the marked rebrightening. We present comparisons of SN 2023aew's spectral evolution with SESN subtypes and argue that it is similar to SNe Ibc during its main peak. P-Cygni Balmer lines are present during the first peak, but vanish during the second peak's photospheric phase, before H$α$ resurfaces again during the nebular phase. The nebular lines ([O I], [Ca II], Mg I], H$α$) exhibit a double-peaked structure which hints towards a clumpy or non-spherical ejecta. We analyze the second peak in the light curve of SN 2023aew and find it to be broader than normal SESNe as well as requiring a very high $^{56}$Ni mass to power the peak luminosity. We discuss the possible origins of SN 2023aew including an eruption scenario where a part of the envelope is ejected during the first peak which also powers the second peak of the light curve through SN-CSM interaction.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
Spatial resolution effects on the solar open flux estimates
Authors:
Ivan Milic,
Rebecca Centeno,
Xudong Sun,
Matthias Rempel,
Jaime de la Cruz Rodriguez
Abstract:
Spectropolarimetric observations used to infer the solar magnetic fields are obtained with a limited spatial resolution. The effects of this limited resolution on the inference of the open flux over the observed region have not been extensively studied. We aim to characterize the biases that arise in the inference of the mean flux density by performing an end-to-end study that involves the generat…
▽ More
Spectropolarimetric observations used to infer the solar magnetic fields are obtained with a limited spatial resolution. The effects of this limited resolution on the inference of the open flux over the observed region have not been extensively studied. We aim to characterize the biases that arise in the inference of the mean flux density by performing an end-to-end study that involves the generation of synthetic data, its interpretation (inversion), and a comparison of the results with the original model. We synthesized polarized spectra of the two magnetically sensitive lines of neutral iron around 630\,nm from a state-of-the-art numerical simulation of the solar photosphere. We then performed data degradation to simulate the effect of the telescope with a limited angular resolution and interpreted (inverted) the data using a Milne-Eddington spectropolarimetric inversion code. We then studied the dependence of the inferred parameters on the telescope resolution. The results show a significant decrease in the mean magnetic flux density -- related to the open flux observed at the disk center -- with decreasing telescope resolution. The original net magnetic field flux is fully resolved by a 1m telescope, but a 20\,cm aperture telescope yields a 30\% smaller value. Even in the fully resolved case, the result is still biased due to the corrugation of the photospheric surface. Even the spatially averaged quantities, such as the open magnetic flux in the observed region, are underestimated when the magnetic structures are unresolved. The reason for this is the presence of nonlinearities in the magnetic field inference process. This effect might have implications for the modeling of large-scale solar magnetic fields; for example, those corresponding to the coronal holes, or the polar magnetic fields, which are relevant to our understanding of the solar cycle.
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
Microstructure and high temperature mechanical properties of liquid-phase-sintered $α$-SiC with Y$_2$O$_3$-Al$_2$O$_3$ additions
Authors:
Miguel Castillo Rodríguez,
Antonio Muñoz Bernabé,
Arturo Domínguez Rodríguez
Abstract:
Samples of $α$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been characterized, being obtained average grain size that grows with the processing time from 0.64 to 1.61 $μ$m. These samples have been deformed in compression under const…
▽ More
Samples of $α$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been characterized, being obtained average grain size that grows with the processing time from 0.64 to 1.61 $μ$m. These samples have been deformed in compression under constant load, to temperatures between 1450 and 1625 C, stresses between 25 and 450 MPa and strain rate between $4.2\times 10^{-8}$ and $1.5\times 10^{-6}$ s$^{-1}$. The creep parameters have been determined, obtaining for n values between 2.4 0.1 and 4.5 0.2 and Q=680 35 kJ.mol$^{-1}$ in samples sintered during 1 hour and n between 1.2 0.1 and 2.4 0.1 and Q=710 90 kJ.mol$^{-1}$ for samples sintered during 7 hours. These results have been correlated with the microstructure, being the grain boundary sliding (GBS) accommodated by lattice diffusion and the movement of dislocations the possible deformation mechanisms, operating both in a simultaneous way.
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
Chromium hardening and Peierls mechanism for basal slip in sapphire at temperatures between 900 and 1500 $^\circ$C
Authors:
Miguel Castillo Rodríguez,
Antonio Muñoz Bernabé,
Jacques Castaing,
Patrick Veyssière,
Arturo Domínguez Rodríguez
Abstract:
The plastic deformation of Cr3+ -doped a-Al2 O3 (ruby) with four distinct Cr concentrations has been studied at temperatures between 900 and 1500 $^\circ$C. The mechanical tests indicate that the processes of dislocation multiplication and the adjustments of the slip velocity of these dislocations to the imposed strain rate in undoped a-Al2 O3 are not significantly affected by the Cr concentra%on.…
▽ More
The plastic deformation of Cr3+ -doped a-Al2 O3 (ruby) with four distinct Cr concentrations has been studied at temperatures between 900 and 1500 $^\circ$C. The mechanical tests indicate that the processes of dislocation multiplication and the adjustments of the slip velocity of these dislocations to the imposed strain rate in undoped a-Al2 O3 are not significantly affected by the Cr concentra%on. The yield stress increment is approximately constant with temperature and the hardening increases with the Cr concentration. The critical resolved shear stress (CRSS) is fixed to a model based on dislocation glide controlled by the nucleation and propagation of kink pairs, modified to include the hardening due to Cr. Satisfactory fits are achieved with adjustable parameters close to those employed for undoped a-Al2 O3 .
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
Effect of atmosphere and sintering time on the microstructure and mechanical properties at high temperatures of $α$-SiC sintered with liquid phase Y$_2$O$_3$ and Al$_2$O$_3$
Authors:
Miguel Castillo Rodriguez,
Antonio Munoz Bernabe,
Arturo Dominguez Rodriguez
Abstract:
The influence that the atmosphere (N_2 or Ar) and sintering time have on microstructure evolution in liquid-phase-sintered alpha-sic and on its mechanical properties at high temperature was investigated. The microstructure of the samples sintered in N2 was equiaxed with a grain size of 0.70 μm and a density of 98% of the theoretical value regardless of the sintering time. In contrast, samples sint…
▽ More
The influence that the atmosphere (N_2 or Ar) and sintering time have on microstructure evolution in liquid-phase-sintered alpha-sic and on its mechanical properties at high temperature was investigated. The microstructure of the samples sintered in N2 was equiaxed with a grain size of 0.70 μm and a density of 98% of the theoretical value regardless of the sintering time. In contrast, samples sintered in Ar had an elongated-grain microstructure with a density decreasing from 99% to 95% and a grain size increasing from 0.64 to 1.61 μm as the sintering time increased from 1 to 7 hours. The mechanical behaviour at 1450 °C showed the samples sintered in nitrogen to be brittle and fail at very low strains, with a fracture stress increasing from 400 to 800 MPa as the sintering time increased. In contrast, the samples sintered in Ar were quasi-ductile with increasing strain to failure as the sintering time increased, and a fracture stress strongly linked to the form and size of the grains. These differences in the mechanical properties of the two materials are discussed in the text. During mechanical tests, a loss of intergranular phase takes place in a region, between 50 and 150 μm thick, close to the surface of the samples--the effect being more important in the samples sintered in Ar
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
Magnetic braking below the cataclysmic variable period gap and the observed dearth of period bouncers
Authors:
Arnab Sarkar,
Antonio C. Rodriguez,
Sivan Ginzburg,
Lev Yungelson,
Christopher A. Tout
Abstract:
Period bouncers are cataclysmic variables (CVs) that have evolved past their orbital period minimum. The strong disagreement between theory and observations of the relative fraction of period bouncers is a severe shortcoming in the understanding of CV evolution. We test the implications of the hypothesis that magnetic braking (MB), which is suggested to be an additional angular momentum loss (AML)…
▽ More
Period bouncers are cataclysmic variables (CVs) that have evolved past their orbital period minimum. The strong disagreement between theory and observations of the relative fraction of period bouncers is a severe shortcoming in the understanding of CV evolution. We test the implications of the hypothesis that magnetic braking (MB), which is suggested to be an additional angular momentum loss (AML) mechanism for CVs below the period gap ($P_\mathrm{orb}\lesssim 120$ min), weakens around their period minimum. We compute the evolution of CV donors below the period gap using the MESA code, assuming that the evolution of the system is driven by AML by gravitational wave radiation (GWR) and MB. We parametrize the MB strength as $\mathrm{AML_{MB}}=κ\mathrm{AML_{GWR}}$. We compute two qualitatively different sets of models, one where $κ$ is a constant and the other where $κ$ depends on stellar parameters. We find that two crucial effects drive the latter set of models. (1) A decrease in $κ$ as CVs approach the period minimum stalls their evolution so that they spend a long time in the observed period minimum spike ($80\lesssim P_\mathrm{orb}/\,\mathrm{min}\lesssim 86$). Here, they become difficult to distinguish from pre-bounce systems in the spike. (2) A strong decrease in the mass-transfer rate makes them virtually undetectable as they evolve further. So, the CV stalls around the period minimum and then `disappears'. This reduces the number of detectable bouncers. Physical processes, such as dynamo action, white dwarf magnetism, and dead zones, may cause such a weakening of MB at short orbital periods. The weakening magnetic braking formalism provides a possible solution to the problem of the lack of period bouncers in CV observational surveys.
△ Less
Submitted 19 June, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
From Active Stars to Black Holes: A Tool for the SRG/eROSITA X-ray Survey and New Discoveries as Proof of Concept
Authors:
Antonio C. Rodriguez
Abstract:
Galactic X-ray sources are diverse, ranging from active M dwarfs to compact object binaries, and everything in between. The X-ray landscape of today is rich, with point source catalogs such as those from XMM-Newton, Chandra, and Swift, each with $\gtrsim10^5$ sources and growing. Furthermore, X-ray astronomy is on the verge of being transformed through data releases from the all-sky SRG/eROSITA su…
▽ More
Galactic X-ray sources are diverse, ranging from active M dwarfs to compact object binaries, and everything in between. The X-ray landscape of today is rich, with point source catalogs such as those from XMM-Newton, Chandra, and Swift, each with $\gtrsim10^5$ sources and growing. Furthermore, X-ray astronomy is on the verge of being transformed through data releases from the all-sky SRG/eROSITA survey. Many X-ray sources can be associated with an optical counterpart, which in the era of Gaia, can be determined to be Galactic or extragalactic through parallax and proper motion information. Here, I present a simple diagram -- the ``X-ray Main Sequence", which distinguishes between compact objects and active stars based on their optical color and X-ray-to-optical flux ratio ($F_X/F_\textrm{opt}$). As a proof of concept, I present optical spectroscopy of six exotic accreting WDs discovered using the X-ray Main Sequence as applied to the XMM-Newton catalog. Looking ahead to surveys of the near future, I additionally present SDSS-V optical spectroscopy of new systems discovered using the X-ray Main Sequence as applied to the SRG/eROSITA eFEDS catalog.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
A Joint SRG/eROSITA + ZTF Search: Discovery of a 97-min Period Eclipsing Cataclysmic Variable with Evidence of a Brown Dwarf Secondary
Authors:
Ilkham Galiullin,
Antonio C. Rodriguez,
Shrinivas R. Kulkarni,
Rashid Sunyaev,
Marat Gilfanov,
Ilfan Bikmaev,
Lev Yungelson,
Jan van Roestel,
Boris T. Gänsicke,
Irek Khamitov,
Paula Szkody,
Kareem El-Badry,
Mikhail Suslikov,
Thomas A. Prince,
Mikhail Buntov,
Ilaria Caiazzo,
Mark Gorbachev,
Matthew J. Graham,
Rustam Gumerov,
Eldar Irtuganov,
Russ R. Laher,
Pavel Medvedev,
Reed Riddle,
Ben Rusholme,
Nail Sakhibullin
, et al. (2 additional authors not shown)
Abstract:
Cataclysmic variables (CVs) that have evolved past the period minimum during their lifetimes are predicted to be systems with a brown dwarf donor. While population synthesis models predict that around $\approx 40-70\%$ of the Galactic CVs are post-period minimum systems referred to as "period bouncers", only a few dozen confirmed systems are known. We report the study and characterisation of a new…
▽ More
Cataclysmic variables (CVs) that have evolved past the period minimum during their lifetimes are predicted to be systems with a brown dwarf donor. While population synthesis models predict that around $\approx 40-70\%$ of the Galactic CVs are post-period minimum systems referred to as "period bouncers", only a few dozen confirmed systems are known. We report the study and characterisation of a new eclipsing CV, SRGeJ041130.3+685350 (SRGeJ0411), discovered from a joint SRG/eROSITA and ZTF program. The optical spectrum of SRGeJ0411 shows prominent hydrogen and helium emission lines, typical for CVs. We obtained optical high-speed photometry to confirm the eclipse of SRGeJ0411 and determine the orbital period to be $P_\textrm{orb} \approx 97.530$ minutes. The spectral energy distribution suggests that the donor has an effective temperature of $\lesssim 1,800$ K. We constrain the donor mass with the period--density relationship for Roche-lobe-filling stars and find that $M_\textrm{donor} \lesssim 0.04\ M_\odot$. The binary parameters are consistent with evolutionary models for post-period minimum CVs, suggesting that SRGeJ0411 is a new period bouncer. The optical emission lines of SRGeJ0411 are single-peaked despite the system being eclipsing, which is typically only seen due to stream-fed accretion in polars. X-ray spectroscopy hints that the white dwarf in SRGeJ0411 could be magnetic, but verifying the magnetic nature of SRGeJ0411 requires further investigation. The lack of optical outbursts has made SRGeJ0411 elusive in previous surveys, and joint X-ray and optical surveys highlight the potential for discovering similar systems in the near future.
△ Less
Submitted 8 January, 2024;
originally announced January 2024.
-
Alignment of the CMS Tracker: Results from LHC Run 3
Authors:
Sandra Consuegra Rodríguez
Abstract:
The strategies for and the performance of the CMS tracker alignment during the ongoing Run 3 data-taking period are described. The results of the very first tracker alignment for Run 3 data reprocessing performed with cosmic rays and collision tracks recorded at the unprecedented center of mass energy of 13.6 TeV are presented. Also, the performance after deployment of a more granular automated al…
▽ More
The strategies for and the performance of the CMS tracker alignment during the ongoing Run 3 data-taking period are described. The results of the very first tracker alignment for Run 3 data reprocessing performed with cosmic rays and collision tracks recorded at the unprecedented center of mass energy of 13.6 TeV are presented. Also, the performance after deployment of a more granular automated alignment associated with the improvement of the alignment calibration already during data taking is discussed. Finally, the prospects for the tracker alignment calibration during the Run 3 data-taking period, in light of the gained operational experience, are discussed.
△ Less
Submitted 2 January, 2024;
originally announced January 2024.
-
Impact of the continuum Coulomb interaction in quantum-orbit-based treatments of high-order above-threshold ionization
Authors:
T. Rook,
D. Habibović,
L. Cruz Rodriguez,
D. B. Milošević,
C. Figueira de Morisson Faria
Abstract:
We perform a systematic comparison between photoelectron momentum distributions computed with the rescattered-quantum orbit strong-field approximation (RQSFA) and the Coulomb-quantum orbit strong-field approximation (CQSFA). We exclude direct, hybrid, and multiple scattered CQSFA trajectories, and focus on the contributions of trajectories that undergo a single act of rescattering. For this orbit…
▽ More
We perform a systematic comparison between photoelectron momentum distributions computed with the rescattered-quantum orbit strong-field approximation (RQSFA) and the Coulomb-quantum orbit strong-field approximation (CQSFA). We exclude direct, hybrid, and multiple scattered CQSFA trajectories, and focus on the contributions of trajectories that undergo a single act of rescattering. For this orbit subset, one may establish a one-to-one correspondence between the RQSFA and CQSFA contributions for backscattered and forward-scattered trajectory pairs. We assess the influence of the Coulomb potential on the ionization and rescattering times of specific trajectory pairs, kinematic constraints determined by rescattering, and quantum interference between specific pairs of trajectories. We analyze how the Coulomb potential alters their ionization and return times, and their interference in photoelectron momentum distributions. We show that Coulomb effects are not significant for high or medium photoelectron energies and shorter orbits, while, for lower momentum ranges or longer electron excursion times in the continuum, the residual Coulomb potential is more important. We also assess the agreement of both theories for different field parameters, and show that it improves with the increase of the wavelength.
△ Less
Submitted 21 February, 2024; v1 submitted 8 December, 2023;
originally announced December 2023.
-
A double copy from twisted (co)homology at genus one
Authors:
Rishabh Bhardwaj,
Andrzej Pokraka,
Lecheng Ren,
Carlos Rodriguez
Abstract:
We study the twisted (co)homology of a family of genus-one integrals -- the so called Riemann-Wirtinger integrals. These integrals are closely related to one-loop string amplitudes in chiral splitting where one leaves the loop-momentum, modulus and all but one puncture un-integrated. While not actual one-loop string integrals, they share many properties and are simple enough that the associated tw…
▽ More
We study the twisted (co)homology of a family of genus-one integrals -- the so called Riemann-Wirtinger integrals. These integrals are closely related to one-loop string amplitudes in chiral splitting where one leaves the loop-momentum, modulus and all but one puncture un-integrated. While not actual one-loop string integrals, they share many properties and are simple enough that the associated twisted (co)homologies have been completely characterized [Goto2022,arXiv:2206.03177]. Using intersection numbers -- an inner product on the vector space of allowed differential forms -- we derive the Gauss-Manin connection for two bases of the twisted cohomology providing an independent check of [Mano&Watanabe2012]. We also use the intersection index -- an inner product on the vector space of allowed contours -- to derive a double-copy formula for the closed-string analogues of Riemann-Wirtinger integrals (one-dimensional integrals over the torus). Similar to the celebrated KLT formula between open- and closed-string tree-level amplitudes, these intersection indices form a genus-one KLT-like kernel defining bilinears in meromorphic Riemann-Wirtinger integrals that are equal to their complex counterparts.
△ Less
Submitted 6 July, 2024; v1 submitted 4 December, 2023;
originally announced December 2023.
-
Motivic coaction and single-valued map of polylogarithms from zeta generators
Authors:
Hadleigh Frost,
Martijn Hidding,
Deepak Kamlesh,
Carlos Rodriguez,
Oliver Schlotterer,
Bram Verbeek
Abstract:
We introduce a new Lie-algebraic approach to explicitly construct the motivic coaction and single-valued map of multiple polylogarithms in any number of variables. In both cases, the appearance of multiple zeta values is controlled by conjugating generating series of polylogarithms with Lie-algebra generators associated with odd zeta values. Our reformulation of earlier constructions of coactions…
▽ More
We introduce a new Lie-algebraic approach to explicitly construct the motivic coaction and single-valued map of multiple polylogarithms in any number of variables. In both cases, the appearance of multiple zeta values is controlled by conjugating generating series of polylogarithms with Lie-algebra generators associated with odd zeta values. Our reformulation of earlier constructions of coactions and single-valued polylogarithms preserves choices of fibration bases, exposes the correlation between multiple zeta values of different depths and paves the way for generalizations beyond genus zero.
△ Less
Submitted 1 December, 2023;
originally announced December 2023.
-
Microlensing Events in Five Years of Photometry from the Zwicky Transient Facility
Authors:
Ruocheng Zhai,
Antonio C. Rodriguez,
Casey Y. Lam,
Eric C. Bellm,
Josiah Purdum,
Frank J. Masci,
Avery Wold
Abstract:
Microlensing has a unique advantage for detecting dark objects in the Milky Way, such as free floating planets, neutron stars, and stellar-mass black holes. Most microlensing surveys focus towards the Galactic bulge, where higher stellar density leads to a higher event rate. However, microlensing events in the Galactic plane are closer, and take place over longer timescales. This enables a better…
▽ More
Microlensing has a unique advantage for detecting dark objects in the Milky Way, such as free floating planets, neutron stars, and stellar-mass black holes. Most microlensing surveys focus towards the Galactic bulge, where higher stellar density leads to a higher event rate. However, microlensing events in the Galactic plane are closer, and take place over longer timescales. This enables a better measurement of the microlensing parallax, which serves as an independent constraint on the mass of the dark lens. In this work, we systematically searched for microlensing events in Zwicky Transient Facility (ZTF) Data Release 17 from 2018--2023 in the Galactic plane region $|b| < 20^\circ$. We find 124 high-confidence microlensing events and 54 possible events. In the event selection, we use the efficient \texttt{EventFinder} algorithm to detect microlensing signals, which could be used for large datasets such as future ZTF data releases or data from the Rubin Observatory Legacy Survey of Space and Time (LSST). With detection efficiencies of ZTF fields from catalog-level simulations, we calculate the mean Einstein timescale to be $\langle t_\mathrm{E}\rangle = 51.7 \pm 3.3$ days, smaller than previous results of the Galactic plane to within 1.5-$σ$. We calculate optical depths and event rates, which we interpret with caution due to the use of visual inspection in creating our final sample. With two years of additional ZTF data in DR17, we have more than doubled the amount of microlensing events (60) found in the three-year DR5 search and found events with longer Einstein timescales than before.
△ Less
Submitted 30 November, 2023;
originally announced November 2023.
-
On Learning the Optimal Regularization Parameter in Inverse Problems
Authors:
Jonathan Chirinos Rodriguez,
Ernesto De Vito,
Cesare Molinari,
Lorenzo Rosasco,
Silvia Villa
Abstract:
Selecting the best regularization parameter in inverse problems is a classical and yet challenging problem. Recently, data-driven approaches have become popular to tackle this challenge. These approaches are appealing since they do require less a priori knowledge, but their theoretical analysis is limited. In this paper, we propose and study a statistical machine learning approach, based on empiri…
▽ More
Selecting the best regularization parameter in inverse problems is a classical and yet challenging problem. Recently, data-driven approaches have become popular to tackle this challenge. These approaches are appealing since they do require less a priori knowledge, but their theoretical analysis is limited. In this paper, we propose and study a statistical machine learning approach, based on empirical risk minimization. Our main contribution is a theoretical analysis, showing that, provided with enough data, this approach can reach sharp rates while being essentially adaptive to the noise and smoothness of the problem. Numerical simulations corroborate and illustrate the theoretical findings. Our results are a step towards grounding theoretically data-driven approaches to inverse problems.
△ Less
Submitted 21 May, 2024; v1 submitted 27 November, 2023;
originally announced November 2023.
-
Stellar Black Holes and Compact Stellar Remnants
Authors:
Guglielmo Costa,
Martyna Chruślińska,
Jakub Klencki,
Floor S. Broekgaarden,
Carl L. Rodriguez,
Tana D. Joseph,
Sara Saracino
Abstract:
The recent observations of gravitational waves (GWs) by the LIGO-Virgo-KAGRA collaboration (LVK) have provided a new opportunity for studying our Universe. By detecting several merging events of black holes (BHs), LVK has spurred the astronomical community to improve theoretical models of single, binary, and multiple star evolution in order to better understand the formation of binary black hole (…
▽ More
The recent observations of gravitational waves (GWs) by the LIGO-Virgo-KAGRA collaboration (LVK) have provided a new opportunity for studying our Universe. By detecting several merging events of black holes (BHs), LVK has spurred the astronomical community to improve theoretical models of single, binary, and multiple star evolution in order to better understand the formation of binary black hole (BBH) systems and interpret their observed properties. The final BBH system configuration before the merger depends on several processes, including those related to the evolution of the inner stellar structure and those due to the interaction with the companion and the environment (such as in stellar clusters). This chapter provides a summary of the formation scenarios of stellar BHs in single, binary, and multiple systems. We review all the important physical processes that affect the formation of BHs and discuss the methodologies used to detect these elusive objects and constrain their properties.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Great Balls of FIRE III: Modeling Black Hole Mergers from Massive Star Clusters in Simulations of Galaxies
Authors:
Tristan Bruel,
Carl L. Rodriguez,
Astrid Lamberts,
Michael Y. Grudic,
Zachary Hafen,
Robert Feldmann
Abstract:
After the nearly hundred gravitational-wave detections reported by the LIGO-Virgo-KAGRA Collaboration, the question of the cosmological origin of merging binary black holes (BBHs) remains open. The two main formation channels generally considered are from isolated field binaries or via dynamical assembly in dense star clusters. Here, we focus on understanding the dynamical formation of merging BBH…
▽ More
After the nearly hundred gravitational-wave detections reported by the LIGO-Virgo-KAGRA Collaboration, the question of the cosmological origin of merging binary black holes (BBHs) remains open. The two main formation channels generally considered are from isolated field binaries or via dynamical assembly in dense star clusters. Here, we focus on understanding the dynamical formation of merging BBHs within massive clusters in galaxies of different masses. To this end, we apply a new framework to consistently model the formation and evolution of massive star clusters in zoom-in cosmological simulations of galaxies. Each simulation, taken from the FIRE project, provides a realistic star formation environment with a unique star formation history and hosts realistic giant molecular clouds that constitute the birthplace of star clusters. Combined with the code for star cluster evolution CMC, we are able to produce populations of dynamically formed merging BBHs across cosmic time in different environments. As the most massive star clusters preferentially form in dense massive clouds of gas, we find that, despite their low metallicities favourable to the creation of black holes, low-mass galaxies contain few massive clusters and therefore have a limited contribution to the global production of dynamically formed merging BBHs. Furthermore, we find that massive clusters can host hierarchical BBH mergers with clear identifiable physical properties. Looking at the evolution of the BBH merger rate in different galaxies, we find strong correlations between BBH mergers and the most extreme episodes of star formation. Finally, we discuss the implications for future LIGO-Virgo-KAGRA gravitational wave observations.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Minutes-duration Optical Flares with Supernova Luminosities
Authors:
Anna Y. Q. Ho,
Daniel A. Perley,
** Chen,
Steve Schulze,
Vik Dhillon,
Harsh Kumar,
Aswin Suresh,
Vishwajeet Swain,
Michael Bremer,
Stephen J. Smartt,
Joseph P. Anderson,
G. C. Anupama,
Supachai Awiphan,
Sudhanshu Barway,
Eric C. Bellm,
Sagi Ben-Ami,
Varun Bhalerao,
Thomas de Boer,
Thomas G. Brink,
Rick Burruss,
Poonam Chandra,
Ting-Wan Chen,
Wen-** Chen,
Jeff Cooke,
Michael W. Coughlin
, et al. (52 additional authors not shown)
Abstract:
In recent years, certain luminous extragalactic optical transients have been observed to last only a few days. Their short observed duration implies a different powering mechanism from the most common luminous extragalactic transients (supernovae) whose timescale is weeks. Some short-duration transients, most notably AT2018cow, display blue optical colours and bright radio and X-ray emission. Seve…
▽ More
In recent years, certain luminous extragalactic optical transients have been observed to last only a few days. Their short observed duration implies a different powering mechanism from the most common luminous extragalactic transients (supernovae) whose timescale is weeks. Some short-duration transients, most notably AT2018cow, display blue optical colours and bright radio and X-ray emission. Several AT2018cow-like transients have shown hints of a long-lived embedded energy source, such as X-ray variability, prolonged ultraviolet emission, a tentative X-ray quasiperiodic oscillation, and large energies coupled to fast (but subrelativistic) radio-emitting ejecta. Here we report observations of minutes-duration optical flares in the aftermath of an AT2018cow-like transient, AT2022tsd (the "Tasmanian Devil"). The flares occur over a period of months, are highly energetic, and are likely nonthermal, implying that they arise from a near-relativistic outflow or jet. Our observations confirm that in some AT2018cow-like transients the embedded energy source is a compact object, either a magnetar or an accreting black hole.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
No X-Rays or Radio from the Nearest Black Holes and Implications for Future Searches
Authors:
Antonio C. Rodriguez,
Yvette Cendes,
Kareem El-Badry,
Edo Berger
Abstract:
Astrometry from the Gaia mission was recently used to discover the two nearest known stellar-mass black holes (BHs), Gaia BH1 and Gaia BH2. Both systems contain $\sim 1\,M_{\odot}$ stars in wide orbits ($a\approx$1.4 AU, 4.96 AU) around $\sim9\,M_{\odot}$ BHs. These objects are among the first stellar-mass BHs not discovered via X-rays or gravitational waves. The companion stars -- a solar-type ma…
▽ More
Astrometry from the Gaia mission was recently used to discover the two nearest known stellar-mass black holes (BHs), Gaia BH1 and Gaia BH2. Both systems contain $\sim 1\,M_{\odot}$ stars in wide orbits ($a\approx$1.4 AU, 4.96 AU) around $\sim9\,M_{\odot}$ BHs. These objects are among the first stellar-mass BHs not discovered via X-rays or gravitational waves. The companion stars -- a solar-type main sequence star in Gaia BH1 and a low-luminosity red giant in Gaia BH2 -- are well within their Roche lobes. However, the BHs are still expected to accrete stellar winds, leading to potentially detectable X-ray or radio emission. Here, we report observations of both systems with the Chandra X-ray Observatory and radio observations with the Very Large Array (for Gaia BH1) and MeerKAT (for Gaia BH2). We did not detect either system, leading to X-ray upper limits of $L_X < 10^{29.4}$ and $L_X < 10^{30.1}\,\rm erg\,s^{-1}$ and radio upper limits of $L_r < 10^{25.2}$ and $L_r < 10^{25.9}\,\rm erg\,s^{-1}$. For Gaia BH2, the non-detection implies that the the accretion rate near the horizon is much lower than the Bondi rate, consistent with recent models for hot accretion flows. We discuss implications of these non-detections for broader BH searches, concluding that it is unlikely that isolated BHs will be detected via ISM accretion in the near future. We also calculate evolutionary models for the binaries' future evolution using Modules for Experiments in Stellar Astrophysics (MESA). We find that Gaia BH1 will be X-ray bright for 5--50 Myr when the star is a red giant, including 5 Myr of stable Roche lobe overflow. Since no symbiotic BH X-ray binaries are known, this implies either that fewer than $\sim 10^4$ Gaia BH1-like binaries exist in the Milky Way, or that they are common but have evaded detection, perhaps due to very long outburst recurrence timescales.
△ Less
Submitted 15 November, 2023; v1 submitted 9 November, 2023;
originally announced November 2023.
-
The High Energy X-ray Probe (HEX-P): Probing Accretion onto Stellar Mass Black Holes
Authors:
Riley Connors,
John Tomsick,
Paul Draghis,
Benjamin Coughenour,
Aarran Shaw,
Javier Garcia,
Dominic Walton,
Kristin Madsen,
Daniel Stern,
Nicole Cavero Rodriguez,
Thomas Dauser,
Melania Del Santo,
Jiachen Jiang,
Henric Krawczynski,
Honghui Liu,
Joseph Neilsen,
Michael Nowak,
Sean Pike,
Andrea Santangelo,
Navin Sridhar,
Andrew West,
Joern Wilms,
the HEX-P Team
Abstract:
Accretion is a universal astrophysical process that plays a key role in cosmic history, from the epoch of reionization to galaxy and stellar formation and evolution. Accreting stellar-mass black holes in X-ray binaries are one of the best laboratories to study the accretion process and probe strong gravity -- and most importantly, to measure the angular momentum, or spin, of black holes, and its r…
▽ More
Accretion is a universal astrophysical process that plays a key role in cosmic history, from the epoch of reionization to galaxy and stellar formation and evolution. Accreting stellar-mass black holes in X-ray binaries are one of the best laboratories to study the accretion process and probe strong gravity -- and most importantly, to measure the angular momentum, or spin, of black holes, and its role as a powering mechanism for relativistic astrophysical phenomena. Comprehensive characterization of the disk-corona system of accreting black holes, and their co-evolution, is fundamental to measurements of black hole spin. Here, we use simulated data to demonstrate how key unanswered questions in the study of accreting stellar-mass black holes will be addressed by the {\it High Energy X-ray Probe} (\hexp). \hexp\ is a probe-class mission concept that will combine high spatial resolution X-ray imaging and broad spectral coverage ($0.2\mbox{--}80$keV) with a sensitivity superior to current facilities (including \xmm\ and \nustar) to enable revolutionary new insights into a variety of important astrophysical problems. We illustrate the capability of \hexp\ to: 1) measure the evolving structures of black hole binary accretion flows down to low ($\lesssim0.1\%$) Eddington-scaled luminosities via detailed X-ray reflection spectroscopy; 2) provide unprecedented spectral observations of the coronal plasma, probing its elusive geometry and energetics; 3) perform detailed broadband studies of stellar mass black holes in nearby galaxies, thus expanding the repertoire of sources we can use to study accretion physics and determine the fundamental nature of black holes; and 4) act as a complementary observatory to a range of future ground and space-based astronomical observatories, thus providing key spectral measurements of the multi-component emission from the inner accretion flows of BH-XRBs.
△ Less
Submitted 8 November, 2023;
originally announced November 2023.
-
A midsurface elasticity model for a thin, nonlinear, gradient elastic plate
Authors:
C. Rodriguez
Abstract:
In this paper, we derive a dynamic surface elasticity model for the two-dimensional midsurface of a thin, three-dimensional, homogeneous, isotropic, nonlinear gradient elastic plate of thickness $h$. The resulting model is parameterized by five, conceivably measurable, physical properties of the plate, and the stored surface energy reduces to Koiter's plate energy in a singular limiting case. The…
▽ More
In this paper, we derive a dynamic surface elasticity model for the two-dimensional midsurface of a thin, three-dimensional, homogeneous, isotropic, nonlinear gradient elastic plate of thickness $h$. The resulting model is parameterized by five, conceivably measurable, physical properties of the plate, and the stored surface energy reduces to Koiter's plate energy in a singular limiting case. The model corrects a theoretical issue found in wave propagation in thin sheets and, when combined with the author's theory of Green elastic bodies possessing gradient elastic material boundary surfaces, removes the singularities present in fracture within traditional/classical models. Our approach diverges from previous research on thin shells and plates, which primarily concentrated on deriving elasticity theories for material surfaces from classical three-dimensional Green elasticity. This work is the first in rigorously develo** a surface elasticity model based on a parent nonlinear gradient elasticity theory.
△ Less
Submitted 25 January, 2024; v1 submitted 6 November, 2023;
originally announced November 2023.
-
Measuring the CMB primordial B-modes with Bolometric Interferometry
Authors:
A. Mennella,
P. Ade,
A. Almela,
G. Amico,
L. H. Arnaldi,
J. Aumont,
S. Banfi,
E. S. Battistelli,
B. Bélier,
L. Bergé,
J. -Ph. Bernard,
P. de Bernardis,
M. Bersanelli,
J. Bonaparte,
J. D. Bonilla,
E. Bunn,
D. Buzi,
F. Cacciotti,
D. Camilieri,
F. Cavaliere,
P. Chanial,
C. Chapron,
L. Colombo,
F. Columbro,
A. Coppolecchia
, et al. (89 additional authors not shown)
Abstract:
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest fo…
▽ More
The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called "spectral imaging", i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of Δν/ν \sim 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QUBIC experiment and future prospects.
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
MolecularWebXR: Multiuser discussions about chemistry and biology in immersive and inclusive VR
Authors:
Fabio J. Cortes Rodriguez,
Gianfranco Frattini,
Fernando Teixeira Pinto Meireles,
Danae A. Terrien,
Sergio Cruz-Leon,
Matteo Dal Peraro,
Eva Schier,
Diego M. Moreno,
Luciano A. Abriata
Abstract:
MolecularWebXR is our new website for education, science communication and scientific peer discussion in chemistry and biology built on WebXR. It democratizes multi-user, inclusive virtual reality (VR) experiences that are deeply immersive for users wearing high-end headsets, yet allow participation by users with consumer devices such as smartphones, possibly inserted into cardboard goggles for im…
▽ More
MolecularWebXR is our new website for education, science communication and scientific peer discussion in chemistry and biology built on WebXR. It democratizes multi-user, inclusive virtual reality (VR) experiences that are deeply immersive for users wearing high-end headsets, yet allow participation by users with consumer devices such as smartphones, possibly inserted into cardboard goggles for immersivity, or even computers or tablets. With no installs as it is all web-served, MolecularWebXR enables multiple users to simultaneously explore, communicate and discuss chemistry and biology concepts in immersive 3D environments, manipulating objects with their bare hands, either present in the same real space or scattered throughout the globe thanks to built-in audio features. A series of preset rooms cover educational material on chemistry and structural biology, and an empty room can be populated with material prepared ad hoc using moleculARweb's VMD-based PDB2AR tool. We verified ease of use and versatility by users aged 12-80 in entirely virtual sessions or mixed real-virtual sessions at science outreach events, student instruction, scientific collaborations, and conference lectures. MolecularWebXR is available for free use without registration at https://molecularwebxr.org, and a blog post version of this preprint with embedded videos is available at https://go.epfl.ch/molecularwebxr-blog-post.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Characterization of diamond-turned optics for SCALES
Authors:
Isabel J. Kain,
Phil Hinz,
Marius Doetz,
Benjamin Bulla,
Renate Kupke,
Daren Dillon,
Andrew Skemer,
Deno Stelter,
Michael Gonzales,
Nicholas MacDonald,
Aditi Gangadharan,
Cristian Rodriguez,
Christopher Ratliff,
Mackenzie R. Lach,
Steph Sallum
Abstract:
High-contrast imaging has been used to discover and characterize dozens of exoplanets to date. The primary limiting performance factor for these instruments is contrast, the ratio of exoplanet to host star brightness that an instrument can successfully resolve. Contrast is largely determined by wavefront error, consisting of uncorrected atmospheric turbulence and optical aberrations downstream of…
▽ More
High-contrast imaging has been used to discover and characterize dozens of exoplanets to date. The primary limiting performance factor for these instruments is contrast, the ratio of exoplanet to host star brightness that an instrument can successfully resolve. Contrast is largely determined by wavefront error, consisting of uncorrected atmospheric turbulence and optical aberrations downstream of AO correction. Single-point diamond turning allows for high-precision optics to be manufactured for use in astronomical instrumentation, presenting a cheaper and more versatile alternative to conventional glass polishing. This work presents measurements of wavefront error for diamond-turned aluminum optics in the Slicer Combined with an Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument, a 2-5 micron coronagraphic integral field spectrograph under construction for Keck Observatory. Wavefront error measurements for these optics are used to simulate SCALES' point spread function using physical optics propagation software poppy, showing that SCALES' contrast performance is not limited by wavefront error from internal instrument optics.
△ Less
Submitted 17 October, 2023;
originally announced October 2023.
-
XLuminA: An Auto-differentiating Discovery Framework for Super-Resolution Microscopy
Authors:
Carla Rodríguez,
Sören Arlt,
Leonhard Möckl,
Mario Krenn
Abstract:
Driven by human ingenuity and creativity, the discovery of super-resolution techniques, which circumvent the classical diffraction limit of light, represent a leap in optical microscopy. However, the vast space encompassing all possible experimental configurations suggests that some powerful concepts and techniques might have not been discovered yet, and might never be with a human-driven direct d…
▽ More
Driven by human ingenuity and creativity, the discovery of super-resolution techniques, which circumvent the classical diffraction limit of light, represent a leap in optical microscopy. However, the vast space encompassing all possible experimental configurations suggests that some powerful concepts and techniques might have not been discovered yet, and might never be with a human-driven direct design approach. Thus, AI-based exploration techniques could provide enormous benefit, by exploring this space in a fast, unbiased way. We introduce XLuminA, an open-source computational framework developed using JAX, which offers enhanced computational speed enabled by its accelerated linear algebra compiler (XLA), just-in-time compilation, and its seamlessly integrated automatic vectorization, auto-differentiation capabilities and GPU compatibility. Remarkably, XLuminA demonstrates a speed-up of 4 orders of magnitude compared to well-established numerical optimization methods. We showcase XLuminA's potential by re-discovering three foundational experiments in advanced microscopy. Ultimately, XLuminA identified a novel experimental blueprint featuring sub-diffraction imaging capabilities. This work constitutes an important step in AI-driven scientific discovery of new concepts in optics and advanced microscopy.
△ Less
Submitted 17 May, 2024; v1 submitted 12 October, 2023;
originally announced October 2023.
-
An Extremely Massive White Dwarf Escaped From the Hyades Star Cluster
Authors:
David R. Miller,
Ilaria Caiazzo,
Jeremy Heyl,
Harvey B. Richer,
Kareem El-Badry,
Antonio C. Rodriguez,
Zachary P. Vanderbosch,
Jan van Roestel
Abstract:
We searched the Gaia DR3 database for ultramassive white dwarfs with kinematics consistent with having escaped the nearby Hyades open cluster, identifying three such candidates. Two of these candidates have masses estimated from Gaia photometry of approximately 1.1 solar masses; their status as products of single stellar evolution that have escaped the cluster was deemed too questionable for immed…
▽ More
We searched the Gaia DR3 database for ultramassive white dwarfs with kinematics consistent with having escaped the nearby Hyades open cluster, identifying three such candidates. Two of these candidates have masses estimated from Gaia photometry of approximately 1.1 solar masses; their status as products of single stellar evolution that have escaped the cluster was deemed too questionable for immediate follow-up analysis. The remaining candidate has an expected mass >1.3 solar masses, significantly reducing the probability of it being an interloper. Analysis of follow-up Gemini GMOS spectroscopy for this source reveals a non-magnetized hydrogen atmosphere white dwarf with a mass and age consistent with having formed from a single star. Assuming a single-stellar evolution formation channel, we estimate a 97.8% chance that the candidate is a true escapee from the Hyades. With a determined mass of 1.317 solar masses, this is potentially the most massive known single-evolution white dwarf and is by far the most massive with a strong association with an open cluster.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
Basis decompositions of genus-one string integrals
Authors:
Carlos Rodriguez,
Oliver Schlotterer,
Yong Zhang
Abstract:
One-loop scattering amplitudes in string theories involve configuration-space integrals over genus-one surfaces with coefficients of Kronecker-Eisenstein series in the integrand. A conjectural genus-one basis of integrands under Fay identities and integration by parts was recently constructed out of chains of Kronecker-Eisenstein series. In this work, we decompose a variety of more general genus-o…
▽ More
One-loop scattering amplitudes in string theories involve configuration-space integrals over genus-one surfaces with coefficients of Kronecker-Eisenstein series in the integrand. A conjectural genus-one basis of integrands under Fay identities and integration by parts was recently constructed out of chains of Kronecker-Eisenstein series. In this work, we decompose a variety of more general genus-one integrands into the conjectural chain basis. The explicit form of the expansion coefficients is worked out for infinite families of cases where the Kronecker-Eisenstein series form cycles. Our results can be used to simplify multiparticle amplitudes in supersymmetric, heterotic and bosonic string theories and to investigate loop-level echoes of the field-theory double-copy structures of string tree-level amplitudes. The multitude of basis reductions in this work strongly validate the recently proposed chain basis and stimulate mathematical follow-up studies of more general configuration-space integrals with additional marked points or at higher genus.
△ Less
Submitted 5 May, 2024; v1 submitted 27 September, 2023;
originally announced September 2023.
-
MAVIS: Multi-Camera Augmented Visual-Inertial SLAM using SE2(3) Based Exact IMU Pre-integration
Authors:
Yifu Wang,
Yonhon Ng,
Inkyu Sa,
Alvaro Parra,
Cristian Rodriguez,
Tao Jun Lin,
Hongdong Li
Abstract:
We present a novel optimization-based Visual-Inertial SLAM system designed for multiple partially overlapped camera systems, named MAVIS. Our framework fully exploits the benefits of wide field-of-view from multi-camera systems, and the metric scale measurements provided by an inertial measurement unit (IMU). We introduce an improved IMU pre-integration formulation based on the exponential functio…
▽ More
We present a novel optimization-based Visual-Inertial SLAM system designed for multiple partially overlapped camera systems, named MAVIS. Our framework fully exploits the benefits of wide field-of-view from multi-camera systems, and the metric scale measurements provided by an inertial measurement unit (IMU). We introduce an improved IMU pre-integration formulation based on the exponential function of an automorphism of SE_2(3), which can effectively enhance tracking performance under fast rotational motion and extended integration time. Furthermore, we extend conventional front-end tracking and back-end optimization module designed for monocular or stereo setup towards multi-camera systems, and introduce implementation details that contribute to the performance of our system in challenging scenarios. The practical validity of our approach is supported by our experiments on public datasets. Our MAVIS won the first place in all the vision-IMU tracks (single and multi-session SLAM) on Hilti SLAM Challenge 2023 with 1.7 times the score compared to the second place.
△ Less
Submitted 19 November, 2023; v1 submitted 15 September, 2023;
originally announced September 2023.
-
Directed Scattering for Knowledge Graph-based Cellular Signaling Analysis
Authors:
Aarthi Venkat,
Joyce Chew,
Ferran Cardoso Rodriguez,
Christopher J. Tape,
Michael Perlmutter,
Smita Krishnaswamy
Abstract:
Directed graphs are a natural model for many phenomena, in particular scientific knowledge graphs such as molecular interaction or chemical reaction networks that define cellular signaling relationships. In these situations, source nodes typically have distinct biophysical properties from sinks. Due to their ordered and unidirectional relationships, many such networks also have hierarchical and mu…
▽ More
Directed graphs are a natural model for many phenomena, in particular scientific knowledge graphs such as molecular interaction or chemical reaction networks that define cellular signaling relationships. In these situations, source nodes typically have distinct biophysical properties from sinks. Due to their ordered and unidirectional relationships, many such networks also have hierarchical and multiscale structure. However, the majority of methods performing node- and edge-level tasks in machine learning do not take these properties into account, and thus have not been leveraged effectively for scientific tasks such as cellular signaling network inference. We propose a new framework called Directed Scattering Autoencoder (DSAE) which uses a directed version of a geometric scattering transform, combined with the non-linear dimensionality reduction properties of an autoencoder and the geometric properties of the hyperbolic space to learn latent hierarchies. We show this method outperforms numerous others on tasks such as embedding directed graphs and learning cellular signaling networks.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Solar Atmospheric Heating Due to Small-scale Events in an Emerging Flux Region
Authors:
Rahul Yadav,
Maria D. Kazachenko,
Andrey N. Afanasyev,
Jaime de la Cruz Rodríguez,
Jorrit Leenaarts
Abstract:
We investigate the thermal, kinematic and magnetic structure of small-scale heating events in an emerging flux region (EFR). We use high-resolution multi-line observations (including Ca II 8542~Å, Ca II K, and Fe I 6301~Åline pair) of an EFR located close to the disk center from the CRISP and CHROMIS instruments at the Swedish 1-m Solar Telescope. We perform non-LTE inversions of multiple spectral…
▽ More
We investigate the thermal, kinematic and magnetic structure of small-scale heating events in an emerging flux region (EFR). We use high-resolution multi-line observations (including Ca II 8542~Å, Ca II K, and Fe I 6301~Åline pair) of an EFR located close to the disk center from the CRISP and CHROMIS instruments at the Swedish 1-m Solar Telescope. We perform non-LTE inversions of multiple spectral lines to infer the temperature, velocity, and magnetic field structure of the heating events. Additionally, we use the data-driven Coronal Global Evolutionary Model to simulate the evolution of the 3D magnetic field configuration above the events and understand their dynamics. Furthermore, we analyze the differential emission measure to gain insights into the heating of the coronal plasma in the EFR. Our analysis reveals the presence of numerous small-scale heating events in the EFR, primarily located at polarity inversion lines of bipolar structures. These events not only heat the lower atmosphere but also significantly heat the corona. The data-driven simulations, along with the observed enhancement of currents and Poynting flux, suggest that magnetic reconnection in the lower atmosphere is likely responsible for the observed heating at these sites.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
A rotating white dwarf shows different compositions on its opposite faces
Authors:
Ilaria Caiazzo,
Kevin B. Burdge,
Pier-Emmanuel Tremblay,
James Fuller,
Lilia Ferrario,
Boris T. Gaensicke,
J. J. Hermes,
Jeremy Heyl,
Adela Kawka,
S. R. Kulkarni,
Thomas R. Marsh,
Przemek Mroz,
Thomas A. Prince,
Harvey B. Richer,
Antonio C. Rodriguez,
Jan van Roestel,
Zachary P. Vanderbosch,
Stephane Vennes,
Dayal Wickramasinghe,
Vikram S. Dhillon,
Stuart P. Littlefair,
James Munday,
Ingrid Pelisoli,
Daniel Perley,
Eric C. Bellm
, et al. (13 additional authors not shown)
Abstract:
White dwarfs, the extremely dense remnants left behind by most stars after their death, are characterised by a mass comparable to that of the Sun compressed into the size of an Earth-like planet. In the resulting strong gravity, heavy elements sink toward the centre and the upper layer of the atmosphere contains only the lightest element present, usually hydrogen or helium. Several mechanisms comp…
▽ More
White dwarfs, the extremely dense remnants left behind by most stars after their death, are characterised by a mass comparable to that of the Sun compressed into the size of an Earth-like planet. In the resulting strong gravity, heavy elements sink toward the centre and the upper layer of the atmosphere contains only the lightest element present, usually hydrogen or helium. Several mechanisms compete with gravitational settling to change a white dwarf's surface composition as it cools, and the fraction of white dwarfs with helium atmospheres is known to increase by a factor ~2.5 below a temperature of about 30,000 K; therefore, some white dwarfs that appear to have hydrogen-dominated atmospheres above 30,000 K are bound to transition to be helium-dominated as they cool below it. Here we report observations of ZTF J203349.8+322901.1, a transitioning white dwarf with two faces: one side of its atmosphere is dominated by hydrogen and the other one by helium. This peculiar nature is likely caused by the presence of a small magnetic field, which creates an inhomogeneity in temperature, pressure or mixing strength over the surface. ZTF J203349.8+322901.1 might be the most extreme member of a class of magnetic, transitioning white dwarfs -- together with GD 323, a white dwarf that shows similar but much more subtle variations. This new class could help shed light on the physical mechanisms behind white dwarf spectral evolution.
△ Less
Submitted 14 August, 2023;
originally announced August 2023.
-
Room-temperature solid-state masers as low-noise amplifiers to facilitate deep-space missions using small spacecraft
Authors:
Carlos Barbero Rodriguez
Abstract:
An increasing number of small ventures are launching missions to space with small volume satellite platforms. These small spacecraft are now being seriously considered for deep-space missions, creating a need for ground stations capable of detecting the faint signals they will transmit to Earth. Here, recent developments in room-temperature solid-state masers are reviewed to determine their readin…
▽ More
An increasing number of small ventures are launching missions to space with small volume satellite platforms. These small spacecraft are now being seriously considered for deep-space missions, creating a need for ground stations capable of detecting the faint signals they will transmit to Earth. Here, recent developments in room-temperature solid-state masers are reviewed to determine their readiness for use as a cheap low-noise amplifier for deep-space communications. Masers based on Pentacene-doped Para-terphenyl (Pc:PTP), Pentacene-doped Picene, Diazapentacene-doped Para-Terphenyl (DAP:PTP), Phenazine/1,2,4,5-Tetracyanobenzene (PNZ/TCNB) co-crystal, NV Diamond, Cuprous Oxide, and Silicon Carbide are considered for comparison. Pc:PTP offers good spin polarisation density and output power but suffers from thermal dissipation problems, DAP:PTP may help to obtain a lower threshold power than that achieved with Pentacene, PNZ/TCNB stands out in spin polarization density but has not achieved room-temperature masing, and NV Diamond is the only medium to have sustained continuous operation but has very limited power output. The other gain media proposed offer theoretical advantages but have not been tested in a working maser device.
△ Less
Submitted 25 September, 2023; v1 submitted 1 August, 2023;
originally announced August 2023.
-
A transiting brown dwarf in a 2 hour orbit
Authors:
Kareem El-Badry,
Kevin B. Burdge,
Jan van Roestel,
Antonio C. Rodriguez
Abstract:
We report the discovery of ZTF J2020+5033, a high-mass brown dwarf (BD) transiting a low-mass star with an orbital period of 1.90 hours. Phase-resolved spectroscopy, optical and infrared light curves, and precise astrometry from Gaia allow us to constrain the masses, radii, and temperatures of both components with few-percent precision. We infer a BD mass of $M_{\rm BD} = 80.1\pm 1.6\,M_{\rm J}$,…
▽ More
We report the discovery of ZTF J2020+5033, a high-mass brown dwarf (BD) transiting a low-mass star with an orbital period of 1.90 hours. Phase-resolved spectroscopy, optical and infrared light curves, and precise astrometry from Gaia allow us to constrain the masses, radii, and temperatures of both components with few-percent precision. We infer a BD mass of $M_{\rm BD} = 80.1\pm 1.6\,M_{\rm J}$, almost exactly at the stellar/substellar boundary, and a moderately inflated radius, $R_{\rm BD} = 1.05\pm 0.02\,R_{\rm J}$. The transiting object's temperature, $T_{\rm eff}\approx 1700\,\rm K$, is well-constrained by the depth of the infrared secondary eclipse and strongly suggests it is a BD. The system's high tangential velocity ($v_\perp = 98\,\rm km\,s^{-1}$) and thick disk-like Galactic orbit imply the binary is old; its close distance ($d\approx 140$ pc) suggests that BDs in short-period orbits are relatively common. ZTF J2020+5033 is the shortest-period known transiting BD by more than a factor of 7. Today, the entire binary would comfortably fit inside the Sun. However, both components must have been considerably larger in youth, implying that the orbit has shrunk by at least a factor of $\sim 5$ since formation. The simplest explanation is that magnetic braking continues to operate efficiently in at least some low-mass stars and BDs.
△ Less
Submitted 13 September, 2023; v1 submitted 28 July, 2023;
originally announced July 2023.
-
SafeLS: Toward Building a Lockstep NOEL-V Core
Authors:
Marcel Sarraseca,
Sergi Alcaide,
Francisco Fuentes,
Juan Carlos Rodriguez,
Feng Chang,
Ilham Lasfar,
Ramon Canal,
Francisco J. Cazorla,
Jaume Abella
Abstract:
Safety-critical systems such as those in automotive, avionics and space, require appropriate safety measures to avoid silent data corruption upon random hardware errors such as those caused by radiation and other types of electromagnetic interference. Those safety measures must be able to prevent faults from causing the so-called common cause failures (CCFs), which occur when a fault produces iden…
▽ More
Safety-critical systems such as those in automotive, avionics and space, require appropriate safety measures to avoid silent data corruption upon random hardware errors such as those caused by radiation and other types of electromagnetic interference. Those safety measures must be able to prevent faults from causing the so-called common cause failures (CCFs), which occur when a fault produces identical errors in redundant elements so that comparison fails to detect the errors and a failure arises. The usual solution to avoid CCFs in CPU cores is using lockstep cores, so that two cores execute the same flow of instructions, but with some time staggering so that their state is never identical and faults can only lead to different errors, which are then detectable by means of comparison. This paper extends Gaisler's RISC-V NOEL-V core with lockstep; and presents future prospects for its use and distribution.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
-
On the sensitivity reach of LQ production with preferential couplings to third generation fermions at the LHC
Authors:
A. Flórez,
J. Jones-Pérez,
A. Gurrola,
C. Rodriguez,
J. Peñuela-Parra
Abstract:
Leptoquarks (LQs) are hypothetical particles that appear in various extensions of the Standard Model (SM) that can explain observed differences between SM theory predictions and experimental results. The production of these particles has been widely studied at various experiments, most recently at the Large Hadron Collider (LHC), and stringent bounds have been placed on their masses and couplings,…
▽ More
Leptoquarks (LQs) are hypothetical particles that appear in various extensions of the Standard Model (SM) that can explain observed differences between SM theory predictions and experimental results. The production of these particles has been widely studied at various experiments, most recently at the Large Hadron Collider (LHC), and stringent bounds have been placed on their masses and couplings, assuming the simplest beyond-SM (BSM) hypotheses. However, the limits are significantly weaker for LQ models with family non-universal couplings containing enhanced couplings to third-generation fermions. We present a new study on the production of a LQ at the LHC, with preferential couplings to third-generation fermions, considering proton-proton collisions at $\sqrt{s} = 13$ $\mathrm{TeV}$ and $\sqrt{s} = 13.6$ $\mathrm{TeV}$. Such a hypothesis is well motivated theoretically and it can explain the recent anomalies in the precision measurements of $\mathrm{B}$-meson decay rates, specifically the $R_{D^{(*)}}$ ratios. Under a simplified model where the LQ masses and couplings are free parameters, we focus on cases where the LQ decays to a $τ$ lepton and a $\mathrm{b}$ quark, and study how the results are affected by different assumptions about chiral currents and interference effects with other BSM processes with the same final states, such as diagrams with a heavy vector boson, $\mathrm{Z}^{'}$. The analysis is performed using machine learning techniques, resulting in an increased discovery reach at the LHC, allowing us to probe new physics phase space which addresses the $\mathrm{B}$-meson anomalies, for $\mathrm{LQ}$ masses up to 5.00 $\mathrm{TeV}$, for the high luminosity LHC scenario.
△ Less
Submitted 24 November, 2023; v1 submitted 20 July, 2023;
originally announced July 2023.