-
Measurement and analysis of the $^{246}$Cm and $^{248}$Cm neutron capture cross-sections at the EAR2 of the n TOF facility
Authors:
V. Alcayne,
A. Kimura,
E. Mendoza,
D. Cano-Ott,
O. Aberle,
F. Álvarez-Velarde,
S. Amaducci,
J. Andrzejewski,
L. Audouin,
V. Bécares,
V. Babiano-Suarez,
M. Bacak,
M. Barbagallo,
F. Bečvář,
G. Bellia,
E. Berthoumieux,
J. Billowes,
D. Bosnar,
A. Brown,
M. Busso,
M. Caamaño,
L. Caballero-Ontanaya,
F. Calviño,
M. Calviani,
A. Casanovas
, et al. (108 additional authors not shown)
Abstract:
The $^{246}$Cm(n,$γ$) and $^{248}$Cm(n,$γ$) cross-sections have been measured at the Experimental Area 2 (EAR2) of the n_TOF facility at CERN with three C$_6$D$_6$ detectors. This measurement is part of a collective effort to improve the capture cross-section data for Minor Actinides (MAs), which are required to estimate the production and transmutation rates of these isotopes in light water react…
▽ More
The $^{246}$Cm(n,$γ$) and $^{248}$Cm(n,$γ$) cross-sections have been measured at the Experimental Area 2 (EAR2) of the n_TOF facility at CERN with three C$_6$D$_6$ detectors. This measurement is part of a collective effort to improve the capture cross-section data for Minor Actinides (MAs), which are required to estimate the production and transmutation rates of these isotopes in light water reactors and innovative reactor systems. In particular, the neutron capture in $^{246}$Cm and $^{248}$Cm open the path for the formation of other Cm isotopes and heavier elements such as Bk and Cf and the knowledge of (n,$γ$) cross-sections of these Cm isotopes plays an important role in the transport, transmutation and storage of the spent nuclear fuel. The reactions $^{246}$Cm(n,$γ$) and $^{248}$Cm(n,$γ$) have been the two first capture measurements analyzed at n_TOF EAR2. Until this experiment and two recent measurements performed at J-PARC, there was only one set of data of the capture cross-sections of $^{246}$Cm and $^{248}$Cm, that was obtained in 1969 in an underground nuclear explosion experiment. In the measurement at n_TOF a total of 13 resonances of $^{246}$Cm between 4 and 400 eV and 5 of $^{248}$Cm between 7 and 100 eV have been identified and fitted. The radiative kernels obtained for $^{246}$Cm are compatible with JENDL-5, but some of them are not with JENDL-4, which has been adopted by JEFF-3.3 and ENDF/B-VIII.0. The radiative kernels obtained for the first three $^{248}$Cm resonances are compatible with JENDL-5, however, the other two are not compatible with any other evaluation and are 20% and 60% larger than JENDL-5.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Bayesian Model Averaging (BMA) for nuclear data evaluation
Authors:
E. Alhassan,
D. Rochman,
G. Schnabel,
A. J. Koning
Abstract:
To ensure agreement between theoretical calculations and experimental data, parameters to selected nuclear physics models, are perturbed, and fine-tuned in nuclear data evaluations. This approach assumes that the chosen set of models accurately represents the `true' distribution. Furthermore, the models are chosen globally, indicating their applicability across the entire energy range of interest.…
▽ More
To ensure agreement between theoretical calculations and experimental data, parameters to selected nuclear physics models, are perturbed, and fine-tuned in nuclear data evaluations. This approach assumes that the chosen set of models accurately represents the `true' distribution. Furthermore, the models are chosen globally, indicating their applicability across the entire energy range of interest. However, this approach overlooks uncertainties inherent in the models themselves. As a result, achieving satisfactory fits to experimental data within certain energy regions for specific channels becomes challenging, as the evaluation is constrained by the deficiencies of the selected models. In this work, we propose that instead of selecting globally a winning model set and proceeding with it as if it was the `true' model set, we instead, take a weighted average over multiple models within a BMA framework, each weighted by its posterior probability. The method involves executing a set of TALYS calculations by randomly varying multiple nuclear physics models and their parameters to yield a vector of calculated observables. Next, the likelihood function was computed at each considered incident energy point for selected cross sections by comparing the vector of calculated observables with that of the selected differential experimental data. As the cross sections and elastic angular distributions were updated locally on a per-energy-point basis, the approach typically results in discontinuities or "kinks" in the curves, and these were addressed using spline interpolation. The proposed BMA method was applied to the evaluation of proton induced reactions on $^{58}$Ni within 1 - 100 MeV. The results demonstrate favorable comparisons with experimental data, as well as with the TENDL-2021 evaluation.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Pushing the high count rate limits of scintillation detectors for challenging neutron-capture experiments
Authors:
J. Balibrea Correa,
J. Lerendegui-Marco,
V. Babiano-Suarez,
C. Domingo-Pardo,
I. Ladarescu,
A. Tarifeño-Saldivia,
V. Alcayne,
D. Cano-Ott,
E. González-Romero,
T. Martínez,
E. Mendoza,
A. Pérez de Rada,
J. Plaza del Olmo,
A. Sánchez-Caballero,
A. Casanovas,
F. Calviño,
S. Valenta,
O. Aberle,
S. Altieri,
S. Amaducci,
J. Andrzejewski,
M. Bacak,
C. Beltrami,
S. Bennett,
A. P. Bernardes
, et al. (109 additional authors not shown)
Abstract:
One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects…
▽ More
One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects, when not properly treated, can lead to large systematic uncertainties and bias in the determination of neutron cross sections. In the majority of neutron capture measurements carried out at the CERN n\_TOF facility, the detectors of choice are the C$_{6}$D$_{6}$ liquid-based either in form of large-volume cells or recently commissioned sTED detector array, consisting of much smaller-volume modules. To account for the aforementioned effects, we introduce a Monte Carlo model for these detectors mimicking harsh count rate conditions similar to those happening at the CERN n\_TOF 20~m fligth path vertical measuring station. The model parameters are extracted by comparison with the experimental data taken at the same facility during 2022 experimental campaign. We propose a novel methodology to consider both, dead-time and pile-up effects simultaneously for these fast detectors and check the applicability to experimental data from $^{197}$Au($n$,$γ$), including the saturated 4.9~eV resonance which is an important component of normalization for neutron cross section measurements.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Uncertainty Quantification on Spent Nuclear Fuel with LMC
Authors:
Arnau Albà,
Andreas Adelmann,
Dimitri Rochman
Abstract:
The recently developed method Lasso Monte Carlo (LMC) for uncertainty quantification is applied to the characterisation of spent nuclear fuel. The propagation of nuclear data uncertainties to the output of calculations is an often required procedure in nuclear computations. Commonly used methods such as Monte Carlo, linear error propagation, or surrogate modelling suffer from being computationally…
▽ More
The recently developed method Lasso Monte Carlo (LMC) for uncertainty quantification is applied to the characterisation of spent nuclear fuel. The propagation of nuclear data uncertainties to the output of calculations is an often required procedure in nuclear computations. Commonly used methods such as Monte Carlo, linear error propagation, or surrogate modelling suffer from being computationally intensive, biased, or ill-suited for high-dimensional settings such as in the case of nuclear data. The LMC method combines multilevel Monte Carlo and machine learning to compute unbiased estimates of the uncertainty, at a lower computational cost than Monte Carlo, even in high-dimensional cases. Here LMC is applied to the calculations of decay heat, nuclide concentrations, and criticality of spent nuclear fuel placed in disposal canisters. The uncertainty quantification in this case is crucial to reduce the risks and costs of disposal of spent nuclear fuel. The results show that LMC is unbiased and has a higher accuracy than simple Monte Carlo.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Fast Uncertainty Quantification of Spent Nuclear Fuel with Neural Networks
Authors:
Arnau Albà,
Andreas Adelmann,
Lucas Münster,
Dimitri Rochman,
Romana Boiger
Abstract:
The accurate calculation and uncertainty quantification of the characteristics of spent nuclear fuel (SNF) play a crucial role in ensuring the safety, efficiency, and sustainability of nuclear energy production, waste management, and nuclear safeguards. State of the art physics-based models, while reliable, are computationally intensive and time-consuming. This paper presents a surrogate modeling…
▽ More
The accurate calculation and uncertainty quantification of the characteristics of spent nuclear fuel (SNF) play a crucial role in ensuring the safety, efficiency, and sustainability of nuclear energy production, waste management, and nuclear safeguards. State of the art physics-based models, while reliable, are computationally intensive and time-consuming. This paper presents a surrogate modeling approach using neural networks (NN) to predict a number of SNF characteristics with reduced computational costs compared to physics-based models. An NN is trained using data generated from CASMO5 lattice calculations. The trained NN accurately predicts decay heat and nuclide concentrations of SNF, as a function of key input parameters, such as enrichment, burnup, cooling time between cycles, mean boron concentration and fuel temperature. The model is validated against physics-based decay heat simulations and measurements of different uranium oxide fuel assemblies from two different pressurized water reactors. In addition, the NN is used to perform sensitivity analysis and uncertainty quantification. The results are in very good alignment to CASMO5, while the computational costs (taking into account the costs of generating training samples) are reduced by a factor of 10 or more. Our findings demonstrate the feasibility of using NNs as surrogate models for fast characterization of SNF, providing a promising avenue for improving computational efficiency in assessing nuclear fuel behavior and associated risks.
△ Less
Submitted 16 August, 2023;
originally announced August 2023.
-
First measurement of the $^{94}$Nb($n$,$γ$) cross section at the CERN n\_TOF facility
Authors:
J. Balibrea-Correa,
V. Babiano-Suarez,
J. Lerendegui-Marco,
C. Domingo-Pardo,
I. Ladarescu,
A. Tarifeño-Saldivia,
V. Alcayne,
D. Cano-Ott,
E. González-Romero,
T. Martínez,
E. Mendoza,
J. Plaza,
A. Sánchez-Caballero,
F. Calviño,
A. Casanovas,
C. Guerrero,
S. Heinitz,
U. Köster,
E. A. Maugeri,
R. Dressler,
D. Schumann,
I. Mönch,
S. Cristallo,
C. Lederer-Woods,
O. Aberle
, et al. (112 additional authors not shown)
Abstract:
One of the crucial ingredients for the improvement of stellar models is the accurate knowledge of neutron capture cross-sections for the different isotopes involved in the $s$-,$r$- and $i$- processes. These measurements can shed light on existing discrepancies between observed and predicted isotopic abundances and help to constrain the physical conditions where these reactions take place along di…
▽ More
One of the crucial ingredients for the improvement of stellar models is the accurate knowledge of neutron capture cross-sections for the different isotopes involved in the $s$-,$r$- and $i$- processes. These measurements can shed light on existing discrepancies between observed and predicted isotopic abundances and help to constrain the physical conditions where these reactions take place along different stages of stellar evolution.In the particular case of the radioactive $^{94}$Nb, the $^{94}$Nb($n$,$γ$) cross-section could play a role in the determination of the $s$-process production of $^{94}$Mo in AGB stars, which presently cannot be reproduced by state-of-the-art stellar models. There are no previous $^{94}$Nb($n$,$γ$) experimental data for the resolved and unresolved resonance regions mainly due to the difficulties in producing high-quality samples and also due to limitations in conventional detection systems commonly used in time-of-flight experiments.Motivated by this situation, a first measurement of the $^{94}$Nb($n$,$γ$) reaction was carried out at CERN n\_TOF, thereby exploiting the high luminosity of the EAR2 area in combination with a new detection system of small-volume C6D6-detectors and a high quality $^{94}$Nb-sample. The latter was based on hyper-pure $^{93}$Nb material activated at the high-flux reactor of ILL-Grenoble. An innovative ring-configuration detection system in close geometry around the capture sample allowed us to significantly enhance the signal-to-background ratio. This set-up was supplemented with two conventional C$_{6}$D$_{6}$ detectors and a high-resolution LaCl$_{3}$(Ce)-detector, which will be employed for addressing reliably systematic effects and uncertainties.At the current status of the data analysis, 18 resonance in $^{94}$Nb+$n$ have been observed for the first time in the neutron energy range from thermal up to 10 keV.
△ Less
Submitted 20 February, 2023; v1 submitted 26 January, 2023;
originally announced January 2023.
-
Measurement of the $^{14}$N(n,p)$^{14}$C cross section at the CERN n_TOF facility from sub-thermal energy to 800 keV
Authors:
P. Torres-Sánchez,
J. Praena,
I. Porras,
M. Sabaté-Gilarte,
C. Lederer-Woods,
O. Aberle,
V. Alcayne,
S. Amaducci,
J. Andrzejewski,
L. Audouin,
V. Bécares,
V. Babiano-Suarez,
M. Bacak,
M. Barbagallo,
F. Bečvář,
G. Bellia,
E. Berthoumieux,
J. Billowes,
D. Bosnar,
A. Brown,
M. Busso,
M. Caamaño,
L. Caballero,
F. Calviño,
M. Calviani
, et al. (107 additional authors not shown)
Abstract:
Background: The $^{14}$N(n,p)$^{14}$C reaction is of interest in neutron capture therapy, where nitrogen-related dose is the main component due to low-energy neutrons, and in astrophysics, where 14N acts as a neutron poison in the s-process. Several discrepancies remain between the existing data obtained in partial energy ranges: thermal energy, keV region and resonance region. Purpose: Measuring…
▽ More
Background: The $^{14}$N(n,p)$^{14}$C reaction is of interest in neutron capture therapy, where nitrogen-related dose is the main component due to low-energy neutrons, and in astrophysics, where 14N acts as a neutron poison in the s-process. Several discrepancies remain between the existing data obtained in partial energy ranges: thermal energy, keV region and resonance region. Purpose: Measuring the 14N(n,p)14C cross section from thermal to the resonance region in a single measurement for the first time, including characterization of the first resonances, and providing calculations of Maxwellian averaged cross sections (MACS). Method: Time-of-flight technique. Experimental Area 2 (EAR-2) of the neutron time-of-flight (n_TOF) facility at CERN. $^{10}$B(n,$α$)$^7$Li and $^{235}$U(n,f) reactions as references. Two detection systems running simultaneously, one on-beam and another off-beam. Description of the resonances with the R-matrix code sammy. Results: The cross section has been measured from sub-thermal energy to 800 keV resolving the two first resonances (at 492.7 and 644 keV). A thermal cross-section (1.809$\pm$0.045 b) lower than the two most recent measurements by slightly more than one standard deviation, but in line with the ENDF/B-VIII.0 and JEFF-3.3 evaluations has been obtained. A 1/v energy dependence of the cross section has been confirmed up to tens of keV neutron energy. The low energy tail of the first resonance at 492.7 keV is lower than suggested by evaluated values, while the overall resonance strength agrees with evaluations. Conclusions: Our measurement has allowed to determine the $^{14}$N(n,p) cross-section over a wide energy range for the first time. We have obtained cross-sections with high accuracy (2.5 %) from sub-thermal energy to 800 keV and used these data to calculate the MACS for kT = 5 to kT = 100 keV.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Lasso Monte Carlo, a Variation on Multi Fidelity Methods for High Dimensional Uncertainty Quantification
Authors:
Arnau Albà,
Romana Boiger,
Dimitri Rochman,
Andreas Adelmann
Abstract:
Uncertainty quantification (UQ) is an active area of research, and an essential technique used in all fields of science and engineering. The most common methods for UQ are Monte Carlo and surrogate-modelling. The former method is dimensionality independent but has slow convergence, while the latter method has been shown to yield large computational speedups with respect to Monte Carlo. However, su…
▽ More
Uncertainty quantification (UQ) is an active area of research, and an essential technique used in all fields of science and engineering. The most common methods for UQ are Monte Carlo and surrogate-modelling. The former method is dimensionality independent but has slow convergence, while the latter method has been shown to yield large computational speedups with respect to Monte Carlo. However, surrogate models suffer from the so-called curse of dimensionality, and become costly to train for high-dimensional problems, where UQ might become computationally prohibitive. In this paper we present a new technique, Lasso Monte Carlo (LMC), which combines a Lasso surrogate model with the multifidelity Monte Carlo technique, in order to perform UQ in high-dimensional settings, at a reduced computational cost. We provide mathematical guarantees for the unbiasedness of the method, and show that LMC can be more accurate than simple Monte Carlo. The theory is numerically tested with benchmarks on toy problems, as well as on a real example of UQ from the field of nuclear engineering. In all presented examples LMC is more accurate than simple Monte Carlo and other multifidelity methods. Thanks to LMC, computational costs are reduced by more than a factor of 5 with respect to simple MC, in relevant cases.
△ Less
Submitted 31 August, 2023; v1 submitted 7 October, 2022;
originally announced October 2022.
-
The CERN n TOF NEAR station for astrophysics- and application-related neutron activation measurements
Authors:
N. Patronis,
A. Mengoni,
N. Colonna,
M. Cecchetto,
C. Domingo-Pardo,
O. Aberle,
J. Lerendegui-Marco,
G. Gervino,
M. E. Stamati,
S. Goula,
A. P. Bernardes,
M. Mastromarco,
A. Manna,
R. Vlastou,
C. Massimi,
M. Calviani,
V. Alcayne,
S. Altieri,
S. Amaducci,
J. Andrzejewski,
V. Babiano-Suarez,
M. Bacak,
J. Balibrea,
C. Beltrami,
S. Bennett
, et al. (108 additional authors not shown)
Abstract:
A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to th…
▽ More
A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to the NEAR station through a hole in the shielding wall of the target, inside which a collimator is inserted. The new area is complemented with a γ-ray spectroscopy laboratory, the GEAR station, equipped with a high efficiency HPGe detector, for the measurement of the activity resulting from irradiation of a sample in the NEAR station. The use of a moderator/filter assembly is envisaged, in order to produce a neutron beam of Maxwellian shape at different thermal energies, necessary for the measurement of Maxwellian Averaged Cross Sections of astrophysical interest. A new fast-cycling activation technique is also being investigated, for measurements of reactions leading to isotopes of very short half life.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Advances and new ideas for neutron-capture astrophysics experiments at CERN n_TOF
Authors:
C. Domingo-Pardo,
V. Babiano-Suarez,
J. Balibrea-Correa,
L. Caballero,
I. Ladarescu,
J. Lerendegui-Marco,
J. L. Tain,
A. Tarifeño-Saldivia,
O. Aberle,
V. Alcayne,
S. Altieri,
S. Amaducci,
J. Andrzejewski,
M. Bacak,
C. Beltrami,
S. Bennett,
A. P. Bernardes,
E. Berthoumieux,
M. Boromiza,
D. Bosnar,
M. Caamaño,
F. Calviño,
M. Calviani,
D. Cano-Ott,
A. Casanovas
, et al. (114 additional authors not shown)
Abstract:
This article presents a few selected developments and future ideas related to the measurement of $(n,γ)$ data of astrophysical interest at CERN n_TOF. The MC-aided analysis methodology for the use of low-efficiency radiation detectors in time-of-flight neutron-capture measurements is discussed, with particular emphasis on the systematic accuracy. Several recent instrumental advances are also prese…
▽ More
This article presents a few selected developments and future ideas related to the measurement of $(n,γ)$ data of astrophysical interest at CERN n_TOF. The MC-aided analysis methodology for the use of low-efficiency radiation detectors in time-of-flight neutron-capture measurements is discussed, with particular emphasis on the systematic accuracy. Several recent instrumental advances are also presented, such as the development of total-energy detectors with $γ$-ray imaging capability for background suppression, and the development of an array of small-volume organic scintillators aimed at exploiting the high instantaneous neutron-flux of EAR2. Finally, astrophysics prospects related to the intermediate $i$ neutron-capture process of nucleosynthesis are discussed in the context of the new NEAR activation area.
△ Less
Submitted 3 August, 2022;
originally announced August 2022.
-
Imaging neutron capture cross sections: i-TED proof-of-concept and future prospects based on Machine-Learning techniques
Authors:
V. Babiano-Suárez,
J. Lerendegui-Marco,
J. Balibrea-Correa,
L. Caballero,
D. Calvo,
I. Ladarescu,
C. Domingo-Pardo,
F. Calviño,
A. Casanovas,
A. Tarifeño-Saldivia,
V. Alcayne,
C. Guerrero,
M. A. Millán-Callado,
M. T. Rodríguez González,
M. Barbagallo,
O. Aberle,
S. Amaducci,
J. Andrzejewski,
L. Audouin,
M. Bacak,
S. Bennett,
E. Berthoumieux,
J. Billowes,
D. Bosnar,
A. Brown
, et al. (110 additional authors not shown)
Abstract:
i-TED is an innovative detection system which exploits Compton imaging techniques to achieve a superior signal-to-background ratio in ($n,γ$) cross-section measurements using time-of-flight technique. This work presents the first experimental validation of the i-TED apparatus for high-resolution time-of-flight experiments and demonstrates for the first time the concept proposed for background reje…
▽ More
i-TED is an innovative detection system which exploits Compton imaging techniques to achieve a superior signal-to-background ratio in ($n,γ$) cross-section measurements using time-of-flight technique. This work presents the first experimental validation of the i-TED apparatus for high-resolution time-of-flight experiments and demonstrates for the first time the concept proposed for background rejection. To this aim both $^{197}$Au($n,γ$) and $^{56}$Fe($n, γ$) reactions were measured at CERN n\_TOF using an i-TED demonstrator based on only three position-sensitive detectors. Two \cds detectors were also used to benchmark the performance of i-TED. The i-TED prototype built for this study shows a factor of $\sim$3 higher detection sensitivity than state-of-the-art \cds detectors in the $\sim$10~keV neutron energy range of astrophysical interest. This paper explores also the perspectives of further enhancement in performance attainable with the final i-TED array consisting of twenty position-sensitive detectors and new analysis methodologies based on Machine-Learning techniques.
△ Less
Submitted 18 December, 2020;
originally announced December 2020.
-
Conception and software implementation of a nuclear data evaluation pipeline
Authors:
Georg Schnabel,
Henrik Sjöstrand,
Joachim Hansson,
Dimitri Rochman,
Arjan Koning,
Roberto Capote
Abstract:
We discuss the design and software implementation of a nuclear data evaluation pipeline applied for a fully reproducible evaluation of neutron-induced cross sections of $^{56}$Fe above the resolved resonance region using the nuclear model code TALYS combined with relevant experimental data. The emphasis is on the mathematical and technical aspects of the pipeline and not on the evaluation of…
▽ More
We discuss the design and software implementation of a nuclear data evaluation pipeline applied for a fully reproducible evaluation of neutron-induced cross sections of $^{56}$Fe above the resolved resonance region using the nuclear model code TALYS combined with relevant experimental data. The emphasis is on the mathematical and technical aspects of the pipeline and not on the evaluation of $^{56}$Fe, which is tentative. The mathematical building blocks combined and employed in the pipeline are discussed in detail. A unified representation of experimental data, systematic and statistical errors, model parameters and defects enables the application of the Generalized Least Squares (GLS) and its natural extension, the Levenberg-Marquardt (LM) algorithm, on a large collection of experimental data. The LM algorithm tailored to nuclear data evaluation accounts for the exact non-linear physics model to determine best estimates of nuclear quantities. Associated uncertainty information is derived from a Taylor expansion at the maximum of the posterior distribution. We also discuss the pipeline in terms of its IT (=information technology) building blocks, such as those to efficiently manage and retrieve experimental data of the EXFOR library and to distribute computations on a scientific cluster. Relying on the mathematical and IT building blocks, we elaborate on the sequence of steps in the pipeline to perform the evaluation, such as the retrieval of experimental data, the correction of experimental uncertainties using marginal likelihood optimization (MLO) and after a screening of thousand TALYS parameters -- including Gaussian process priors on energy dependent parameters -- the fitting of about 150 parameters using the LM algorithm. The code of the pipeline including a manual and a Dockerfile for a simplified installation is available at www.nucleardata.com.
△ Less
Submitted 5 May, 2021; v1 submitted 1 September, 2020;
originally announced September 2020.
-
Iterative Bayesian Monte Carlo for nuclear data evaluation
Authors:
E. Alhassan,
D. Rochman,
A. Vasiliev,
M. Wohlmuther,
M. Hursin,
A. J. Koning,
H. Ferroukhi
Abstract:
In this work, we explore the use of an iterative Bayesian Monte Carlo (IBM) procedure for nuclear data evaluation within a Talys Evaluated Nuclear data Library (TENDL) framework. In order to identify the model and parameter combinations that reproduce selected experimental data, different physical models implemented within the TALYS code, were sampled and varied simultaneously to produce random in…
▽ More
In this work, we explore the use of an iterative Bayesian Monte Carlo (IBM) procedure for nuclear data evaluation within a Talys Evaluated Nuclear data Library (TENDL) framework. In order to identify the model and parameter combinations that reproduce selected experimental data, different physical models implemented within the TALYS code, were sampled and varied simultaneously to produce random input files with unique model combinations. All the models considered were assumed to be equal a priori. Parameters to these models were then varied simultaneously using the TALYS code system to produce a set of random ENDF files which were processed into x-y tables for comparison with selected experimental data from the EXFOR database within a Bayesian framework. To improve our fit to experimental data, we iteratively update our 'best' file - the file that maximises the likelihood function - by re-sampling model parameters around this file. The method proposed has been applied for the evaluation of p+Cd-111 and Co-59 between 1 - 100 MeV incident energy region. Finally, the adjusted files were compared with experimental data from the EXFOR database as well as with evaluations from the TENDL-2017 and JENDL-4.0/HE nuclear data libraries.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
In search of the best nuclear data file for proton induced reactions: varying both models and their parameters
Authors:
E. Alhassan,
D. Rochman,
A. Vasiliev,
R. M. Bergmann,
M. Wohlmuther,
A. J. Koning,
H. Ferroukhi
Abstract:
A lot of research work has been carried out in fine tuning model parameters to reproduce experimental data for neutron induced reactions. This however is not the case for proton induced reactions where large deviations still exist between model calculations and experiments for some cross sections. In this work, we present a method for searching both the model and model parameter space in order to…
▽ More
A lot of research work has been carried out in fine tuning model parameters to reproduce experimental data for neutron induced reactions. This however is not the case for proton induced reactions where large deviations still exist between model calculations and experiments for some cross sections. In this work, we present a method for searching both the model and model parameter space in order to identify the 'best' nuclear reaction models with their parameter sets that reproduces carefully selected experimental data. Three sets of experimental data from EXFOR are used in this work: (1) cross sections of the target nucleus (2) cross sections of the residual nuclei and (3) angular distributions. Selected models and their parameters were varied simultaneously to produce a large set of random nuclear data files. The goodness of fit between our adjustments and experimental data was achieved by computing a global reduced chi square which took into consideration the above listed experimental data. The method has been applied for the adjustment of proton induced reactions on Co-59 between 1 to 100 MeV. The adjusted files obtained are compared with available experimental data and evaluations from other nuclear data libraries.
△ Less
Submitted 24 December, 2019;
originally announced December 2019.
-
Review and new concepts for neutron-capture measurements of astrophysical interest
Authors:
C. Domingo-Pardo,
V. Babiano-Suarez,
J. Balibrea-Correa,
L. Caballero,
I. Ladarescu,
J. Lerendegui-Marco,
J. L. Tain,
F. Calviño,
A. Casanovas,
A. Segarra,
A. E. Tarifeño-Saldivia,
C. Guerrero,
M. A. Millán-Callado,
J. M. Quesada,
M. T. Rodríguez-González,
O. Aberle,
V. Alcayne,
S. Amaducci,
J. Andrzejewski,
L. Audouin,
M. Bacak,
M. Barbagallo,
S. Bennett,
E. Berthoumieux,
D. Bosnar
, et al. (106 additional authors not shown)
Abstract:
The idea of slow-neutron capture nucleosynthesis formulated in 1957 triggered a tremendous experimental effort in different laboratories worldwide to measure the relevant nuclear physics input quantities, namely ($n,γ$) cross sections over the stellar temperature range (from few eV up to several hundred keV) for most of the isotopes involved from Fe up to Bi. A brief historical review focused on t…
▽ More
The idea of slow-neutron capture nucleosynthesis formulated in 1957 triggered a tremendous experimental effort in different laboratories worldwide to measure the relevant nuclear physics input quantities, namely ($n,γ$) cross sections over the stellar temperature range (from few eV up to several hundred keV) for most of the isotopes involved from Fe up to Bi. A brief historical review focused on total energy detectors will be presented to illustrate how, advances in instrumentation have led, over the years, to the assessment and discovery of many new aspects of $s$-process nucleosynthesis and to the progressive refinement of theoretical models of stellar evolution. A summary will be presented on current efforts to develop new detection concepts, such as the Total-Energy Detector with $γ$-ray imaging capability (i-TED). The latter is based on the simultaneous combination of Compton imaging with neutron time-of-flight (TOF) techniques, in order to achieve a superior level of sensitivity and selectivity in the measurement of stellar neutron capture rates.
△ Less
Submitted 16 November, 2019;
originally announced November 2019.
-
Bayesian updating for data adjustments and multi-level uncertainty propagation within Total Monte Carlo
Authors:
E. Alhassan,
D. Rochman,
H. Sjöstrand,
A. Vasiliev,
A. J. Koning,
H. Ferroukhi
Abstract:
In this work, a method is proposed for combining differential and integral benchmark experimental data within a Bayesian framework for nuclear data adjustments and multi-level uncertainty propagation using the Total Monte Carlo method. First, input parameters to basic nuclear physics models implemented within the state of the art nuclear reactions code, TALYS, were sampled from uniform distributio…
▽ More
In this work, a method is proposed for combining differential and integral benchmark experimental data within a Bayesian framework for nuclear data adjustments and multi-level uncertainty propagation using the Total Monte Carlo method. First, input parameters to basic nuclear physics models implemented within the state of the art nuclear reactions code, TALYS, were sampled from uniform distributions and randomly varied to produce a large set of random nuclear data files. Next, a probabilistic data assimilation was carried out by computing the likelihood function for each random nuclear data file based first on only differential experimental data (1st update) and then on integral benchmark data (2nd update). The individual likelihood functions from the two updates were then combined into a global likelihood function which was used for the selection of the final 'best' file. The proposed method has been applied for the adjustment of $^{208}$Pb in the fast neutron energy region below 20 MeV. The 'best' file from the adjustments was compared with available experimental data from the EXFOR database as well as evaluations from the major nuclear data libraries and found to compare favourably.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
EASY-II: a system for modelling of n, d, p, γ and α activation and transmutation processes
Authors:
Jean-Christophe Sublet,
James Eastwood,
Guy Morgan,
Arjan Koning,
Dimitri Rochman
Abstract:
EASY-II is designed as a functional replacement for the previous European Activation System, EASY-2010. It has extended nuclear data and new software, FISPACT-II, written in object-style Fortran to provide new capabilities for predictions of activation, transmutation, depletion and burnup. The new FISPACT-II code has allowed us to implement many more features in terms of energy range, up to GeV; i…
▽ More
EASY-II is designed as a functional replacement for the previous European Activation System, EASY-2010. It has extended nuclear data and new software, FISPACT-II, written in object-style Fortran to provide new capabilities for predictions of activation, transmutation, depletion and burnup. The new FISPACT-II code has allowed us to implement many more features in terms of energy range, up to GeV; incident particles: alpha, gamma, proton, deuteron and neutron; and neutron physics: self-shielding effects, temperature dependence, pathways analysis, sensitivity and error estimation using covariance data. These capabilities cover most application needs: nuclear fission and fusion, accelerator physics, isotope production, waste management and many more. In parallel, the maturity of modern general-purpose libraries such as TENDL-2012 encompassing thousands of target nuclides, the evolution of the ENDF format and the capabilities of the latest generation of processing codes PREPRO-2012, NJOY2012 and CALENDF-2010 have allowed the FISPACT-II code to be fed with more robust, complete and appropriate data: cross-sections with covariance, probability tables in the resonance ranges, kerma, dpa, gas and radionuclide production and 24 decay types. All such data for the five most important incident particles are placed in evaluated data files up to an incident energy of 200 MeV. The resulting code and data system, EASY-II, includes many new features and enhancements. It has been extensively tested, and also benefits from the feedback from wide-ranging validation and verification activities performed with its predecessor.
△ Less
Submitted 27 September, 2013;
originally announced September 2013.
-
Propagation of nuclear data uncertainties for ELECTRA burn-up calculations
Authors:
H. Sjöstrand,
E. Alhassan,
J. Duan,
C. Gustavsson,
A. Koning,
S. Pomp,
D. Rochman,
M. Österlund
Abstract:
The European Lead-Cooled Training Reactor (ELECTRA) has been proposed as a training reactor for fast systems within the Swedish nuclear program. It is a low-power fast reactor cooled by pure liquid lead. In this work, we propagate the uncertainties in Pu-239 transport data to uncertainties in the fuel inventory of ELECTRA during the reactor life using the Total Monte Carlo approach (TMC). Within t…
▽ More
The European Lead-Cooled Training Reactor (ELECTRA) has been proposed as a training reactor for fast systems within the Swedish nuclear program. It is a low-power fast reactor cooled by pure liquid lead. In this work, we propagate the uncertainties in Pu-239 transport data to uncertainties in the fuel inventory of ELECTRA during the reactor life using the Total Monte Carlo approach (TMC). Within the TENDL project the nuclear models input parameters were randomized within their uncertainties and 740 Pu-239 nuclear data libraries were generated. These libraries are used as inputs to reactor codes, in our case SERPENT, to perform uncertainty analysis of nuclear reactor inventory during burn-up. The uncertainty in the inventory determines uncertainties in: the long-term radio-toxicity, the decay heat, the evolution of reactivity parameters, gas pressure and volatile fission product content. In this work, a methodology called fast TMC is utilized, which reduces the overall calculation time. The uncertainty in the long-term radiotoxicity, decay heat, gas pressure and volatile fission products were found to be insignificant. However, the uncertainty of some minor actinides were observed to be rather large and therefore their impact on multiple recycling should be investigated further. It was also found that, criticality benchmarks can be used to reduce inventory uncertainties due to nuclear data. Further studies are needed to include fission yield uncertainties, more isotopes, and a larger set of benchmarks.
△ Less
Submitted 8 April, 2013; v1 submitted 5 April, 2013;
originally announced April 2013.
-
Combining Total Monte Carlo and Benchmarks for nuclear data uncertainty propagation on an LFRs safety parameters
Authors:
Erwin Alhassan,
Henrik Sjöstrand,
Junfeng Duan,
Cecilia Gustavsson,
Arjan Koning,
Stephan Pomp,
Dimitri Rochman,
Michael Österlund
Abstract:
Analyses are carried out to assess the impact of nuclear data uncertainties on keff for the European Lead Cooled Training Reactor (ELECTRA) using the Total Monte Carlo method. A large number of Pu-239 random ENDF-formated libraries generated using the TALYS based system were processed into ACE format with NJOY99.336 code and used as input into the Serpent Monte Carlo neutron transport code to obta…
▽ More
Analyses are carried out to assess the impact of nuclear data uncertainties on keff for the European Lead Cooled Training Reactor (ELECTRA) using the Total Monte Carlo method. A large number of Pu-239 random ENDF-formated libraries generated using the TALYS based system were processed into ACE format with NJOY99.336 code and used as input into the Serpent Monte Carlo neutron transport code to obtain distribution in keff. The keff distribution obtained was compared with the latest major nuclear data libraries - JEFF-3.1.2, ENDF/B-VII.1 and JENDL-4.0. A method is proposed for the selection of benchmarks for specific applications using the Total Monte Carlo approach. Finally, an accept/reject criterion was investigated based on chi square values obtained using the Pu-239 Jezebel criticality benchmark. It was observed that nuclear data uncertainties in keff were reduced considerably from 748 to 443 pcm by applying a more rigid acceptance criteria for accepting random files.
△ Less
Submitted 4 April, 2013; v1 submitted 26 March, 2013;
originally announced March 2013.
-
Uncertainty study of nuclear model parameters for the n+ ^{56}Fe reactions in the fast neutron region below 20 MeV
Authors:
Junfeng Duan,
Stephan Pomp,
Henrik Sjöstrand,
Erwin Alhassan,
Cecilia Gustavsson,
Michael Österlund,
Arjan Koning,
Dimitri Rochman
Abstract:
In this work, we study the uncertainty of nuclear model parameters for neutron induced ^{56}Fe reactions in fast neutron region by using the Total Monte Carlo method. We perform a large number of TALYS runs and compare the calculated results with the experimental data of the cross sections to obtain the uncertainties of the model parameters. Based on the derived uncertainties another 1000 TALYS ru…
▽ More
In this work, we study the uncertainty of nuclear model parameters for neutron induced ^{56}Fe reactions in fast neutron region by using the Total Monte Carlo method. We perform a large number of TALYS runs and compare the calculated results with the experimental data of the cross sections to obtain the uncertainties of the model parameters. Based on the derived uncertainties another 1000 TALYS runs have been performed to create random cross section files. For comparison with the experimental data we calculate a weighted χ^2 value for each random file as well as the ENDF/B-VII.1, JEFF3.1, JENDL4.0 and CENDL3.1 data libraries. Furthermore, we investigate the optical model parameters correlation obtained by way of this procedure.
△ Less
Submitted 25 March, 2013;
originally announced March 2013.