-
Detectable signals of post-Born lensing curl B-modes
Authors:
Mathew Robertson,
Giulio Fabbian,
Julien Carron,
Antony Lewis
Abstract:
Curl lensing, also known as lensing field-rotation or shear B-modes, is a distinct post-Born observable caused by two lensing deflections at different redshifts (lens-lens coupling). For the Cosmic Microwave Background (CMB), the field-rotation is approximately four orders of magnitude smaller than the CMB lensing convergence. Direct detection is therefore challenging for near-future CMB experimen…
▽ More
Curl lensing, also known as lensing field-rotation or shear B-modes, is a distinct post-Born observable caused by two lensing deflections at different redshifts (lens-lens coupling). For the Cosmic Microwave Background (CMB), the field-rotation is approximately four orders of magnitude smaller than the CMB lensing convergence. Direct detection is therefore challenging for near-future CMB experiments such as the Simons Observatory (SO) or CMB `Stage-4' (CMB-S4). Instead, the curl can be probed in cross-correlation between a direct reconstruction and a template formed using pairs of large-scale structure (LSS) tracers to emulate the lens-lens coupling. In this paper, we derive a new estimator for the optimal curl template specifically adapted for curved-sky applications, and test it against non-Gaussian complications using N-body cosmology simulations. We find non-foreground biases to the curl cross-spectrum are purely Gaussian at the sensitivity of SO. However, higher-order curl contractions induce non-Gaussian bias at the order of $1σ$ for CMB-S4 using quadratic estimators (QE). Maximum a-Posteriori (MAP) lensing estimators significantly reduce biases for both SO and CMB-S4, in agreement with our analytic predictions. We also show that extragalactic foregrounds in the CMB can bias curl measurements at order of the signal, and evaluate a variety of mitigation strategies to control these biases for SO-like experiments. Near-future observations will be able to measure post-Born lensing curl B-modes.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Geometric Characterization of Rat Urinary Bladder Wall During Ex-Vivo Filling Using Micro-Computed Tomography (Micro-CT)
Authors:
Fatemeh Azari,
Anne M. Robertson,
Lori A. Birder
Abstract:
This study employs micro-computed tomography (micro-CT) to unravel the geometrical intricacies of the rat urinary bladder wall during various states of ex-vivo filling, contrasting markedly with the commonly held idealizations of uniform bladder geometry. Through precise 3D reconstructions at resolutions between 10-20 micrometers, the research meticulously documents the bladder's morphological tra…
▽ More
This study employs micro-computed tomography (micro-CT) to unravel the geometrical intricacies of the rat urinary bladder wall during various states of ex-vivo filling, contrasting markedly with the commonly held idealizations of uniform bladder geometry. Through precise 3D reconstructions at resolutions between 10-20 micrometers, the research meticulously documents the bladder's morphological transformations across different filling pressures. The findings illuminate substantial deviations from the theoretical model of a uniformly thick, spherical bladder, particularly underlined by variations in wall thickness and bladder volume during the transition from voided to filled states. These results are pivotal for refining mechanical models of bladder function, which have traditionally oversimplified the complex geometrical and biomechanical behavior of the bladder. Moreover, this study underscores the potential of micro-CT in providing a deeper understanding of bladder mechanics, essential for advancing therapeutic strategies for conditions like bladder outlet obstruction (BOO), thereby enhancing both surgical and pharmacological treatment paradigms.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Quantifying Smooth Muscles Regional Organization in the Rat Bladder Using Immunohistochemistry, Multiphoton Microscopy and Machine Learning
Authors:
Alireza Asadbeygi,
Yasutaka Tobe,
Naoki Yoshimura,
Sean D. Stocker,
Simon Watkins,
Paul Watton,
Anne M. Robertson
Abstract:
The smooth muscle bundles (SMBs) in the bladder act as contractile elements which enable the bladder to void effectively. In contrast to skeletal muscles, these bundles are not highly aligned, rather they are oriented more heterogeneously throughout the bladder wall. In this work, for the first time, this regional orientation of the SMBs is quantified across the whole bladder, without the need for…
▽ More
The smooth muscle bundles (SMBs) in the bladder act as contractile elements which enable the bladder to void effectively. In contrast to skeletal muscles, these bundles are not highly aligned, rather they are oriented more heterogeneously throughout the bladder wall. In this work, for the first time, this regional orientation of the SMBs is quantified across the whole bladder, without the need for optical clearing or cryosectioning. Immunohistochemistry staining was utilized to visualize smooth muscle cell actin in multiphoton microscopy (MPM) images of bladder smooth muscle bundles (SMBs). Feature vectors for each pixel were generated using a range of filters, including Gaussian blur, Gaussian gradient magnitude, Laplacian of Gaussian, Hessian eigenvalues, structure tensor eigenvalues, Gabor, and Sobel gradients. A Random Forest classifier was subsequently trained to automate the segmentation of SMBs in the MPM images. Finally, the orientation of SMBs in each bladder region was quantified using the CT-FIRE package. This information is essential for biomechanical models of the bladder that include contractile elements.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Beyond Point Masses. II. Non-Keplerian Shape Effects are Detectable in Several TNO Binaries
Authors:
Benjamin C. N. Proudfoot,
Darin A. Ragozzine,
Meagan L. Thatcher,
Will Grundy,
Dallin J. Spencer,
Tahina M. Alailima,
Sawyer Allen,
Penelope C. Bowden,
Susanne Byrd,
Conner D. Camacho,
Gibson H. Campbell,
Edison P. Carlisle,
Jacob A. Christensen,
Noah K. Christensen,
Kaelyn Clement,
Benjamin J. Derieg,
Mara K. Dille,
Cristian Dorrett,
Abigail L. Ellefson,
Taylor S. Fleming,
N. J. Freeman,
Ethan J. Gibson,
William G. Giforos,
Jacob A. Guerrette,
Olivia Haddock
, et al. (38 additional authors not shown)
Abstract:
About 40 transneptunian binaries (TNBs) have fully determined orbits with about 10 others being solved except for breaking the mirror ambiguity. Despite decades of study almost all TNBs have only ever been analyzed with a model that assumes perfect Keplerian motion (e.g., two point masses). In reality, all TNB systems are non-Keplerian due to non-spherical shapes, possible presence of undetected s…
▽ More
About 40 transneptunian binaries (TNBs) have fully determined orbits with about 10 others being solved except for breaking the mirror ambiguity. Despite decades of study almost all TNBs have only ever been analyzed with a model that assumes perfect Keplerian motion (e.g., two point masses). In reality, all TNB systems are non-Keplerian due to non-spherical shapes, possible presence of undetected system components, and/or solar perturbations. In this work, we focus on identifying candidates for detectable non-Keplerian motion based on sample of 45 well-characterized binaries. We use MultiMoon, a non-Keplerian Bayesian inference tool, to analyze published relative astrometry allowing for non-spherical shapes of each TNB system's primary. We first reproduce the results of previous Keplerian fitting efforts with MultiMoon, which serves as a comparison for the non-Keplerian fits and confirms that these fits are not biased by the assumption of a Keplerian orbit. We unambiguously detect non-Keplerian motion in 8 TNB systems across a range of primary radii, mutual orbit separations, and system masses. As a proof of concept for non-Keplerian fitting, we perform detailed fits for (66652) Borasisi-Pabu, possibly revealing a $J_2 \approx 0.44$, implying Borasisi (and/or Pabu) may be a contact binary or an unresolved compact binary. However, full confirmation of this result will require new observations. This work begins the next generation of TNB analyses that go beyond the point mass assumption to provide unique and valuable information on the physical properties of TNBs with implications for their formation and evolution.
△ Less
Submitted 19 March, 2024;
originally announced March 2024.
-
Phenoty** calcification in vascular tissues using artificial intelligence
Authors:
Mehdi Ramezanpour,
Anne M. Robertson,
Yasutaka Tobe,
Xiaowei Jia,
Juan R. Cebral
Abstract:
Vascular calcification is implicated as an important factor in major adverse cardiovascular events (MACE), including heart attack and stroke. A controversy remains over how to integrate the diverse forms of vascular calcification into clinical risk assessment tools. Even the commonly used calcium score for coronary arteries, which assumes risk scales positively with total calcification, has import…
▽ More
Vascular calcification is implicated as an important factor in major adverse cardiovascular events (MACE), including heart attack and stroke. A controversy remains over how to integrate the diverse forms of vascular calcification into clinical risk assessment tools. Even the commonly used calcium score for coronary arteries, which assumes risk scales positively with total calcification, has important inconsistencies. Fundamental studies are needed to determine how risk is influenced by the diverse calcification phenotypes. However, studies of these kinds are hindered by the lack of high-throughput, objective, and non-destructive tools for classifying calcification in imaging data sets. Here, we introduce a new classification system for phenoty** calcification along with a semi-automated, non-destructive pipeline that can distinguish these phenotypes in even atherosclerotic tissues. The pipeline includes a deep-learning-based framework for segmenting lipid pools in noisy micro-CT images and an unsupervised clustering framework for categorizing calcification based on size, clustering, and topology. This approach is illustrated for five vascular specimens, providing phenoty** for thousands of calcification particles across as many as 3200 images in less than seven hours. Average Dice Similarity Coefficients of 0.96 and 0.87 could be achieved for tissue and lipid pool, respectively, with training and validation needed on only 13 images despite the high heterogeneity in these tissues. By introducing an efficient and comprehensive approach to phenoty** calcification, this work enables large-scale studies to identify a more reliable indicator of the risk of cardiovascular events, a leading cause of global mortality and morbidity.
△ Less
Submitted 17 January, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
Giant anomalous Hall effect in epitaxial Mn$_{3.2}$Ge films with a cubic kagome structure
Authors:
J. S. R. McCoombs,
B. D. MacNeil,
V. Askarpour,
J. Myra,
H. Herdin,
M. Pula,
M. D. Robertson,
G. M. Luke,
K. L. Kavanagh,
J. Maassen,
T. L. Monchesky
Abstract:
We report on the first example of epitaxial Mn$_{3 + δ}$Ge thin films with a cubic $L1_2$ structure. The films are found to exhibit frustrated ferromagnetism with an average magnetization corresponding to 0.98$~\pm~$0.06$~μ_B$/Mn, far larger than the parasitic ferromagnetism in hexagonal Mn$_3$Ge and the partially compensated ferrimagnetism in tetragonal Mn$_3$Ge. The Hall conductivity is the larg…
▽ More
We report on the first example of epitaxial Mn$_{3 + δ}$Ge thin films with a cubic $L1_2$ structure. The films are found to exhibit frustrated ferromagnetism with an average magnetization corresponding to 0.98$~\pm~$0.06$~μ_B$/Mn, far larger than the parasitic ferromagnetism in hexagonal Mn$_3$Ge and the partially compensated ferrimagnetism in tetragonal Mn$_3$Ge. The Hall conductivity is the largest reported for the kagome magnets with a low temperature value of $σ_{xy} = 1587~$S/cm. Density functional calculations predict that a chiral antiferromagnetic structure is lower in energy than a ferromagnetic configuration in an ordered stoichiometric crystal. However, chemical disorder driven by the excess Mn in our films explains why a frustrated 120$^\circ$ spin structure is not observed. Comparisons between the magnetization and the Hall resistivity indicate that a non-coplanar spin structure contributes the Hall signal. Anisotropic magnetoresistance and planar Hall effect with hysteresis up to 14 T provides further insights into this material.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Kashiwara-Vergne solutions degree by degree
Authors:
Zsuzsanna Dancso,
Iva Halacheva,
Guillaume Laplante-Anfossi,
Marcy Robertson
Abstract:
We show that solutions to the Kashiwara-Vergne problem can be extended degree by degree. This can be used to simplify the computation of a class of Drinfel'd associators, which under the Alekseev-Torossian conjecture, may comprise all associators. We also give a proof that the associated graded Lie algebra of the Kashiwara-Vergne group is isomorphic to the graded Kashiwara-Vergne Lie algebra.
We show that solutions to the Kashiwara-Vergne problem can be extended degree by degree. This can be used to simplify the computation of a class of Drinfel'd associators, which under the Alekseev-Torossian conjecture, may comprise all associators. We also give a proof that the associated graded Lie algebra of the Kashiwara-Vergne group is isomorphic to the graded Kashiwara-Vergne Lie algebra.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Moving Mesh Simulations of Pitting Corrosion
Authors:
Abu Naser Sarker,
Ronald D. Haynes,
Michael Robertson
Abstract:
Damages due to pitting corrosion of metals cost industry billions of dollars per year and can put human lives at risk. The design and implementation of an adaptive moving mesh method is provided for a moving boundary problem related to pitting corrosion. The adaptive mesh is generated automatically by solving a mesh PDE coupled to the nonlinear potential problem. The moving mesh approach is shown…
▽ More
Damages due to pitting corrosion of metals cost industry billions of dollars per year and can put human lives at risk. The design and implementation of an adaptive moving mesh method is provided for a moving boundary problem related to pitting corrosion. The adaptive mesh is generated automatically by solving a mesh PDE coupled to the nonlinear potential problem. The moving mesh approach is shown to enable initial mesh generation, provide mesh recovery and is able to smoothly tackle changing pit geometry. Materials with varying crystallography are considered. Changing mesh topology due to the merging of pits is also handled. The evolution of the pit shape, the pit depth and the pit width are computed and compared to existing results in the literature.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies
Authors:
James Paul Mason,
Alexandra Werth,
Colin G. West,
Allison A. Youngblood,
Donald L. Woodraska,
Courtney Peck,
Kevin Lacjak,
Florian G. Frick,
Moutamen Gabir,
Reema A. Alsinan,
Thomas Jacobsen,
Mohammad Alrubaie,
Kayla M. Chizmar,
Benjamin P. Lau,
Lizbeth Montoya Dominguez,
David Price,
Dylan R. Butler,
Connor J. Biron,
Nikita Feoktistov,
Kai Dewey,
N. E. Loomis,
Michal Bodzianowski,
Connor Kuybus,
Henry Dietrick,
Aubrey M. Wolfe
, et al. (977 additional authors not shown)
Abstract:
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms th…
▽ More
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, $α=2$ as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed $>$600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: pre-flare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that $α= 1.63 \pm 0.03$. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
How to detect lensing rotation
Authors:
Mathew Robertson,
Antony Lewis
Abstract:
Gravitational lensing rotation of images is predicted to be negligible at linear order in density perturbations, but can be produced by the post-Born lens-lens coupling at second order. This rotation is somewhat enhanced for Cosmic Microwave Background (CMB) lensing due to the large source path length, but remains small and very challenging to detect directly by CMB lensing reconstruction alone. W…
▽ More
Gravitational lensing rotation of images is predicted to be negligible at linear order in density perturbations, but can be produced by the post-Born lens-lens coupling at second order. This rotation is somewhat enhanced for Cosmic Microwave Background (CMB) lensing due to the large source path length, but remains small and very challenging to detect directly by CMB lensing reconstruction alone. We show the rotation may be detectable at high significance as a cross-correlation signal between the curl reconstructed with Simons Observatory (SO) or CMB-S4 data, and a template constructed from quadratic combinations of large-scale structure (LSS) tracers. Equivalently, the lensing rotation-tracer-tracer bispectrum can also be detected, where LSS tracers considered include the CMB lensing convergence, galaxy density, and the Cosmic Infrared Background (CIB), or optimal combinations thereof. We forecast that an optimal combination of these tracers can probe post-Born rotation at the level of $5.7σ$-$6.1σ$ with SO and $13.6σ$-$14.7σ$ for CMB-S4, depending on whether standard quadratic estimators or maximum a posteriori iterative methods are deployed. We also show possible improvement up to $21.3σ$ using a CMB-S4 deep patch observation with polarization-only iterative lensing reconstruction. However, these cross-correlation signals have non-zero bias because the rotation template is quadratic in the tracers, and exists even if the lensing is rotation free. We estimate this bias analytically, and test it using simple null-hypothesis simulations to confirm that the bias remains subdominant to the rotation signal of interest. Detection and then measurement of the lensing rotation cross-spectrum is therefore a realistic target for future observations.
△ Less
Submitted 28 June, 2024; v1 submitted 23 March, 2023;
originally announced March 2023.
-
A knot-theoretic approach to comparing the Grothendieck-Teichmüller and Kashiwara-Vergne groups
Authors:
Zsuzsanna Dancso,
Tamara Hogan,
Marcy Robertson
Abstract:
Homomorphic expansions are combinatorial invariants of knotted objects, which are universal in the sense that all finite-type (Vassiliev) invariants factor through them. Homomorphic expansions are also important as bridging objects between low-dimensional topology and quantum algebra. For example, homomorphic expansions of parenthesised braids are in one-to-one correspondence with Drinfel'd associ…
▽ More
Homomorphic expansions are combinatorial invariants of knotted objects, which are universal in the sense that all finite-type (Vassiliev) invariants factor through them. Homomorphic expansions are also important as bridging objects between low-dimensional topology and quantum algebra. For example, homomorphic expansions of parenthesised braids are in one-to-one correspondence with Drinfel'd associators (Bar-Natan 1998), and homomorphic expansions of $w$-foams are in one-to-one correspondence with solutions to the Kashiwara-Vergne (KV) equations (Bar-Natan and the first author, 2017). The sets of Drinfel'd associators and KV solutions are both bi-torsors, with actions by the pro-unipotent Grothendieck-Teichmüller and Kashiwara-Vergne groups, respectively. The above correspondences are in fact maps of bi-torsors (Bar-Natan 1998, and the first and third authors with Halacheva 2022).
There is a deep relationship between Drinfel'd associators and KV equations--discovered by Alekseev, Enriquez and Torossian in the 2010s--including an explicit formula constructing KV solutions in terms of associators, and an injective map $ρ:\mathsf{GRT}_1 \to \mathsf{KRV}$. This paper is a topological/diagrammatic study of the image of the Grothendieck-Teichmüller groups in the Kashiwara-Vergne symmetry groups, using the fact that both parenthesised braids and $w$-foams admit respective finite presentations as an operad and as a tensor category (circuit algebra or prop).
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
Lecture Notes on Modular Infinity Operads and Grothendieck-Teichmueller Theory
Authors:
Olivia Borghi,
Marcy Robertson
Abstract:
These notes represent the transcript of three, 90 minute lectures given by the second author at the CRM in Barcelona in 2021 as part of the "Higher Structures and Operadic Calculus" workshop. The goal of the series was to introduce and motivate modular infinity operads via their application to what is often called "Grothendieck-Teichmueller" theory.
These notes represent the transcript of three, 90 minute lectures given by the second author at the CRM in Barcelona in 2021 as part of the "Higher Structures and Operadic Calculus" workshop. The goal of the series was to introduce and motivate modular infinity operads via their application to what is often called "Grothendieck-Teichmueller" theory.
△ Less
Submitted 6 May, 2023; v1 submitted 24 October, 2022;
originally announced October 2022.
-
Inferring random change point from left-censored longitudinal data by segmented mechanistic nonlinear models, with application in HIV surveillance study
Authors:
Hongbin Zhang,
McKaylee Robertson,
Sarah L. Braunstein,
Levi Waldron,
Denis Nash
Abstract:
The primary goal of public health efforts to control HIV epidemics is to diagnose and treat people with HIV infection as soon as possible after seroconversion. The timing of initiation of antiretroviral therapy (ART) treatment after HIV diagnosis is, therefore, a critical population-level indicator that can be used to measure the effectiveness of public health programs and policies at local and na…
▽ More
The primary goal of public health efforts to control HIV epidemics is to diagnose and treat people with HIV infection as soon as possible after seroconversion. The timing of initiation of antiretroviral therapy (ART) treatment after HIV diagnosis is, therefore, a critical population-level indicator that can be used to measure the effectiveness of public health programs and policies at local and national levels. However, population-based data on ART initiation are unavailable because ART initiation and prescription are typically measured indirectly by public health departments (e.g., with viral suppression as a proxy). In this paper, we present a random change-point model to infer the time of ART initiation utilizing routinely reported individual-level HIV viral load from an HIV surveillance system. To deal with the left-censoring and the nonlinear trajectory of viral load data, we formulate a flexible segmented nonlinear mixed effects model and propose a Stochastic version of EM (StEM) algorithm, coupled with a Gibbs sampler for the inference. We apply the method to a random subset of HIV surveillance data to infer the timing of ART initiation since diagnosis and to gain additional insights into the viral load dynamics. Simulation studies are also performed to evaluate the properties of the proposed method.
△ Less
Submitted 2 August, 2022;
originally announced August 2022.
-
ProSelfLC: Progressive Self Label Correction Towards A Low-Temperature Entropy State
Authors:
Xinshao Wang,
Yang Hua,
Elyor Kodirov,
Sankha Subhra Mukherjee,
David A. Clifton,
Neil M. Robertson
Abstract:
There is a family of label modification approaches including self and non-self label correction (LC), and output regularisation. They are widely used for training robust deep neural networks (DNNs), but have not been mathematically and thoroughly analysed together. We study them and discover three key issues: (1) We are more interested in adopting Self LC as it leverages its own knowledge and requ…
▽ More
There is a family of label modification approaches including self and non-self label correction (LC), and output regularisation. They are widely used for training robust deep neural networks (DNNs), but have not been mathematically and thoroughly analysed together. We study them and discover three key issues: (1) We are more interested in adopting Self LC as it leverages its own knowledge and requires no auxiliary models. However, it is unclear how to adaptively trust a learner as the training proceeds. (2) Some methods penalise while the others reward low-entropy (i.e., high-confidence) predictions, prompting us to ask which one is better. (3) Using the standard training setting, a learned model becomes less confident when severe noise exists. Self LC using high-entropy knowledge would generate high-entropy targets.
To resolve the issue (1), inspired by a well-accepted finding, i.e., deep neural networks learn meaningful patterns before fitting noise, we propose a novel end-to-end method named ProSelfLC, which is designed according to the learning time and prediction entropy. Concretely, for any data point, we progressively and adaptively trust its predicted probability distribution versus its annotated one if a network has been trained for a relatively long time and the prediction is of low entropy. For the issue (2), the effectiveness of ProSelfLC defends entropy minimisation. By ProSelfLC, we empirically prove that it is more effective to redefine a semantic low-entropy state and optimise the learner toward it. To address the issue (3), we decrease the entropy of self knowledge using a low temperature before exploiting it to correct labels, so that the revised labels redefine low-entropy target probability distributions.
We demonstrate the effectiveness of ProSelfLC through extensive experiments in both clean and noisy settings, and on both image and protein datasets.
△ Less
Submitted 6 September, 2022; v1 submitted 30 June, 2022;
originally announced July 2022.
-
Chirality-induced zigzag domain wall in in-plane magnetized ultrathin films
Authors:
Gong Chen,
MacCallum Robertson,
Heeyoung Kwon,
Changyeon Won,
Andreas K. Schmid,
Kai Liu
Abstract:
The domain structure in in-plane magnetized Fe/Ni/W(110) films is investigated using spin-polarized low-energy electron microscopy. A novel transition of the domain wall shape from a zigzag-like pattern to straight is observed as a function of the film thickness, which is triggered by the transition of the domain wall type from out-of-plane chiral wall to in-plane Néel wall. The contribution of th…
▽ More
The domain structure in in-plane magnetized Fe/Ni/W(110) films is investigated using spin-polarized low-energy electron microscopy. A novel transition of the domain wall shape from a zigzag-like pattern to straight is observed as a function of the film thickness, which is triggered by the transition of the domain wall type from out-of-plane chiral wall to in-plane Néel wall. The contribution of the Dzyaloshinskii-Moriya interaction to the wall energy is proposed to explain the transition of the domain wall shape, which is supported by Monte-Carlo simulations.
△ Less
Submitted 18 August, 2021;
originally announced August 2021.
-
A topological characterisation of the Kashiwara-Vergne groups
Authors:
Zsuzsanna Dancso,
Iva Halacheva,
Marcy Robertson
Abstract:
In 2017 Bar-Natan and the first author showed that solutions to the Kashiwara--Vergne equations are in bijection with certain knot invariants: homomorphic expansions of welded foams. Welded foams are a class of knotted tubes in $\mathbb{R}^4$, which can be finitely presented algebraically as a circuit algebra, or, equivalently, a wheeled prop. In this paper we describe the Kashiwara-Vergne groups…
▽ More
In 2017 Bar-Natan and the first author showed that solutions to the Kashiwara--Vergne equations are in bijection with certain knot invariants: homomorphic expansions of welded foams. Welded foams are a class of knotted tubes in $\mathbb{R}^4$, which can be finitely presented algebraically as a circuit algebra, or, equivalently, a wheeled prop. In this paper we describe the Kashiwara-Vergne groups $\mathsf{KV}$ and $\mathsf{KRV}$ -- the symmetry groups of Kashiwara-Vergne solutions -- as automorphisms of the completed circuit algebras of welded foams, and their associated graded circuit algebra of arrow diagrams, respectively. Finally, we provide a description of the graded Grothendieck-Teichmüller group $\mathsf{GRT}_1$ as automorphisms of arrow diagrams.
△ Less
Submitted 14 July, 2021; v1 submitted 4 June, 2021;
originally announced June 2021.
-
Not All Knowledge Is Created Equal: Mutual Distillation of Confident Knowledge
Authors:
Ziyun Li,
Xinshao Wang,
Di Hu,
Neil M. Robertson,
David A. Clifton,
Christoph Meinel,
Hao** Yang
Abstract:
Mutual knowledge distillation (MKD) improves a model by distilling knowledge from another model. However, \textit{not all knowledge is certain and correct}, especially under adverse conditions. For example, label noise usually leads to less reliable models due to undesired memorization \cite{zhang2017understanding,arpit2017closer}. Wrong knowledge misleads the learning rather than helps. This prob…
▽ More
Mutual knowledge distillation (MKD) improves a model by distilling knowledge from another model. However, \textit{not all knowledge is certain and correct}, especially under adverse conditions. For example, label noise usually leads to less reliable models due to undesired memorization \cite{zhang2017understanding,arpit2017closer}. Wrong knowledge misleads the learning rather than helps. This problem can be handled by two aspects: (i) improving the reliability of a model where the knowledge is from (i.e., knowledge source's reliability); (ii) selecting reliable knowledge for distillation. In the literature, making a model more reliable is widely studied while selective MKD receives little attention. Therefore, we focus on studying selective MKD. Concretely, a generic MKD framework, \underline{C}onfident knowledge selection followed by \underline{M}utual \underline{D}istillation (CMD), is designed. The key component of CMD is a generic knowledge selection formulation, making the selection threshold either static (CMD-S) or progressive (CMD-P). Additionally, CMD covers two special cases: zero-knowledge and all knowledge, leading to a unified MKD framework. Extensive experiments are present to demonstrate the effectiveness of CMD and thoroughly justify the design of CMD. For example, CMD-P obtains new state-of-the-art results in robustness against label noise.
△ Less
Submitted 16 November, 2022; v1 submitted 2 June, 2021;
originally announced June 2021.
-
Observation of hydrogen-induced Dzyaloshinskii-Moriya interaction and reversible switching of magnetic chirality
Authors:
Gong Chen,
MacCallum Robertson,
Markus Hoffmann,
Colin Ophus,
Andre L. Fernandes Cauduro,
Roberto Lo Conte,
Haifeng Ding,
Roland Wiesendanger,
Stefan Blügel,
Andreas K. Schmid,
Kai Liu
Abstract:
The Dzyaloshinskii-Moriya interaction (DMI) has drawn great attention as it stabilizes magnetic chirality, with important implications in fundamental and applied research. This antisymmetric exchange interaction is induced by the broken inversion symmetry at interfaces or in non-centrosymmetric lattices. Significant interfacial DMI was found often at magnetic / heavy-metal interfaces with large sp…
▽ More
The Dzyaloshinskii-Moriya interaction (DMI) has drawn great attention as it stabilizes magnetic chirality, with important implications in fundamental and applied research. This antisymmetric exchange interaction is induced by the broken inversion symmetry at interfaces or in non-centrosymmetric lattices. Significant interfacial DMI was found often at magnetic / heavy-metal interfaces with large spin-orbit coupling. Recent studies have shown promise of induced DMI at interfaces involving light elements such as carbon (graphene) or oxygen. Here we report direct observation of induced DMI by chemisorption of the lightest element, hydrogen, on a ferromagnetic layer at room temperature, which is supported by density functional theory calculations. We further demonstrate a reversible chirality transition of the magnetic domain walls due to the induced DMI via hydrogen chemisorption/desorption. These results shed new light on the understanding of DMI in low atomic number materials and design of novel chiral spintronics and magneto-ionic devices.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Ghosts of NEID's Past
Authors:
Shubham Kanodia,
Joe P. Ninan,
Andrew J. Monson,
Suvrath Mahadevan,
Colin Nitroy,
Christian Schwab,
Samuel Halverson,
Chad F. Bender,
Ryan Terrien,
Frederick R. Hearty,
Emily Lubar,
Michael W. McElwain,
Lawrence. W. Ramsey,
Paul M. Robertson,
Arpita Roy,
Gudmundur Stefansson,
Daniel J. Stevens
Abstract:
The NEID spectrograph is a R $\sim$ 120,000 resolution fiber-fed and highly stabilized spectrograph for extreme radial velocity (RV) precision. It is being commissioned at the 3.5 m WIYN telescope in Kitt Peak National Observatory with a desired instrumental precision of better than 30 \cms{}. NEID's bandpass of 380 -- 930 nm enables the simultaneous wavelength coverage of activity indicators from…
▽ More
The NEID spectrograph is a R $\sim$ 120,000 resolution fiber-fed and highly stabilized spectrograph for extreme radial velocity (RV) precision. It is being commissioned at the 3.5 m WIYN telescope in Kitt Peak National Observatory with a desired instrumental precision of better than 30 \cms{}. NEID's bandpass of 380 -- 930 nm enables the simultaneous wavelength coverage of activity indicators from the Ca HK lines in the blue to the Ca IR triplet in the IR. In this paper we will present our efforts to characterize and mitigate optical ghosts in the NEID spectrograph during assembly, integration and testing, and highlight several of the dominant optical element contributors such as the cross dispersion prism and input optics. We shall present simulations of the 2-D spectrum and discuss the predicted ghost features on the focal plane, and how they may impact the RV performance for NEID. We also present the mitigation strategy adopted for each ghost which may be applied to future instrument designs. This work will enable other instrument builders to potentially avoid some of these issues, as well as outline mitigation strategies.
△ Less
Submitted 8 December, 2020; v1 submitted 30 November, 2020;
originally announced December 2020.
-
Circuit algebras are wheeled props
Authors:
Zsuzsanna Dancso,
Iva Halacheva,
Marcy Robertson
Abstract:
Circuit algebras, introduced by Bar-Natan and the first author, are a generalization of Jones's planar algebras, in which one drops the planarity condition on "connection diagrams". They provide a useful language for the study of virtual and welded tangles in low-dimensional topology. In this note, we present the circuit algebra analogue of the well-known classification of planar algebras as pivot…
▽ More
Circuit algebras, introduced by Bar-Natan and the first author, are a generalization of Jones's planar algebras, in which one drops the planarity condition on "connection diagrams". They provide a useful language for the study of virtual and welded tangles in low-dimensional topology. In this note, we present the circuit algebra analogue of the well-known classification of planar algebras as pivotal categories with a self-dual generator. Our main theorem is that there is an equivalence of categories between circuit algebras and the category of linear wheeled props - a type of strict symmetric tensor category with duals that arises in homotopy theory, deformation theory and the Batalin-Vilkovisky quantization formalism.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
FairFace Challenge at ECCV 2020: Analyzing Bias in Face Recognition
Authors:
Tomáš Sixta,
Julio C. S. Jacques Junior,
Pau Buch-Cardona,
Neil M. Robertson,
Eduard Vazquez,
Sergio Escalera
Abstract:
This work summarizes the 2020 ChaLearn Looking at People Fair Face Recognition and Analysis Challenge and provides a description of the top-winning solutions and analysis of the results. The aim of the challenge was to evaluate accuracy and bias in gender and skin colour of submitted algorithms on the task of 1:1 face verification in the presence of other confounding attributes. Participants were…
▽ More
This work summarizes the 2020 ChaLearn Looking at People Fair Face Recognition and Analysis Challenge and provides a description of the top-winning solutions and analysis of the results. The aim of the challenge was to evaluate accuracy and bias in gender and skin colour of submitted algorithms on the task of 1:1 face verification in the presence of other confounding attributes. Participants were evaluated using an in-the-wild dataset based on reannotated IJB-C, further enriched by 12.5K new images and additional labels. The dataset is not balanced, which simulates a real world scenario where AI-based models supposed to present fair outcomes are trained and evaluated on imbalanced data. The challenge attracted 151 participants, who made more than 1.8K submissions in total. The final phase of the challenge attracted 36 active teams out of which 10 exceeded 0.999 AUC-ROC while achieving very low scores in the proposed bias metrics. Common strategies by the participants were face pre-processing, homogenization of data distributions, the use of bias aware loss functions and ensemble models. The analysis of top-10 teams shows higher false positive rates (and lower false negative rates) for females with dark skin tone as well as the potential of eyeglasses and young age to increase the false positive rates too.
△ Less
Submitted 2 December, 2020; v1 submitted 16 September, 2020;
originally announced September 2020.
-
Machine learning-based event generator for electron-proton scattering
Authors:
Y. Alanazi,
P. Ambrozewicz,
M. Battaglieri,
A. N. Hiller Blin,
M. P. Kuchera,
Y. Li,
T. Liu,
R. E. McClellan,
W. Melnitchouk,
E. Pritchard,
M. Robertson,
N. Sato,
R. Strauss,
L. Velasco
Abstract:
We present a new machine learning-based Monte Carlo event generator using generative adversarial networks (GANs) that can be trained with calibrated detector simulations to construct a vertex-level event generator free of theoretical assumptions about femtometer scale physics. Our framework includes a GAN-based detector folding as a fast-surrogate model that mimics detector simulators. The framewo…
▽ More
We present a new machine learning-based Monte Carlo event generator using generative adversarial networks (GANs) that can be trained with calibrated detector simulations to construct a vertex-level event generator free of theoretical assumptions about femtometer scale physics. Our framework includes a GAN-based detector folding as a fast-surrogate model that mimics detector simulators. The framework is tested and validated on simulated inclusive deep-inelastic scattering data along with existing parametrizations for detector simulation, with uncertainty quantification based on a statistical bootstrap** technique. Our results provide for the first time a realistic proof-of-concept to mitigate theory bias in inferring vertex-level event distributions needed to reconstruct physical observables.
△ Less
Submitted 19 April, 2022; v1 submitted 6 August, 2020;
originally announced August 2020.
-
An Image Analogies Approach for Multi-Scale Contour Detection
Authors:
Slimane Larabi,
Neil M. Robertson
Abstract:
In this paper we deal with contour detection based on the recent image analogy principle which has been successfully used for super-resolution, texture and curves synthesis and interactive editing. Hand-drawn outlines are initially as benchmarks. Given such a reference image, we present a new method based on this expertise to locate contours of a query image in the same way that it is done for the…
▽ More
In this paper we deal with contour detection based on the recent image analogy principle which has been successfully used for super-resolution, texture and curves synthesis and interactive editing. Hand-drawn outlines are initially as benchmarks. Given such a reference image, we present a new method based on this expertise to locate contours of a query image in the same way that it is done for the reference (i.e by analogy).
Applying a image analogies for contour detection using hand drawn images as leaning images cannot gives good result for any query image. The contour detection may be improved if we increase the number of learning images such that there will be exist similarity between query image and some reference images. In addition of the hardness of contours drawing task, this will increase considerably the time computation.
We investigated in this work, how can we avoid this constraint in order to guaranty that all contour pixels will be located for any query image. Fourteen derived stereo patches, derived from a mathematical study, are the knowledge used in order to locate contours at different scales independently of the light conditions.
Comprehensive experiments are conducted on different data sets (BSD 500, Horses of Weizmann). The obtained results show superior performance via precision and recall vs. hand-drawn contours at multiple resolutions to the reported state of the art.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.
-
An infinity operad of normalized cacti
Authors:
Luciana Basualdo Bonatto,
Safia Chettih,
Abigail Linton,
Sophie Raynor,
Marcy Robertson,
Nathalie Wahl
Abstract:
We show that normalized cacti form an $\infty$-operad in the form of a dendroidal space satisfying a weak Segal condition. To do this, we introduce a new topological operad of bracketed trees and an enrichment of the dendroidal category $Ω$.
We show that normalized cacti form an $\infty$-operad in the form of a dendroidal space satisfying a weak Segal condition. To do this, we introduce a new topological operad of bracketed trees and an enrichment of the dendroidal category $Ω$.
△ Less
Submitted 3 July, 2020;
originally announced July 2020.
-
In-plane Néel wall chirality and orientation of interfacial Dzyaloshinskii-Moriya vector in magnetic films
Authors:
MacCallum Robertson,
Christopher J. Agostino,
Gong Chen,
Sang Pyo Kang,
Arantzazu Mascaraque,
Enrique Garcia Michel,
Changyeon Won,
Yizheng Wu,
Andreas K. Schmid,
Kai Liu
Abstract:
The interfacial Dzyaloshinskii-Moriya interaction (DMI) is of great interest as it can stabilize chiral spin structures in thin films. Experiments verifying the orientation of the interfacial DMI vector remain rare, in part due to the difficulty of separating vector components of DMI. In this study, Fe/Ni bilayers and Co/Ni multilayers were deposited epitaxially onto Cu(001) and Pt(111) substrates…
▽ More
The interfacial Dzyaloshinskii-Moriya interaction (DMI) is of great interest as it can stabilize chiral spin structures in thin films. Experiments verifying the orientation of the interfacial DMI vector remain rare, in part due to the difficulty of separating vector components of DMI. In this study, Fe/Ni bilayers and Co/Ni multilayers were deposited epitaxially onto Cu(001) and Pt(111) substrates, respectively. By tailoring the effective anisotropy, spin reorientation transitions (SRTs) are employed to probe the orientation of the DMI vector by measuring the spin structure of domain walls on both sides of the SRTs. The interfacial DMI is found to be sufficiently strong to stabilize chiral Néel walls in the out-of-plane magnetized regimes, while achiral Néel walls are observed in the in-plane magnetized regimes. These findings experimentally confirm that the out-of-plane component of the DMI vector is insignificant in these fcc(001) and fcc(111) oriented interfaces, even in the presence of atomic steps.
△ Less
Submitted 14 July, 2020; v1 submitted 25 June, 2020;
originally announced June 2020.
-
Off-Policy Self-Critical Training for Transformer in Visual Paragraph Generation
Authors:
Shiyang Yan,
Yang Hua,
Neil M. Robertson
Abstract:
Recently, several approaches have been proposed to solve language generation problems. Transformer is currently state-of-the-art seq-to-seq model in language generation. Reinforcement Learning (RL) is useful in solving exposure bias and the optimisation on non-differentiable metrics in seq-to-seq language learning. However, Transformer is hard to combine with RL as the costly computing resource is…
▽ More
Recently, several approaches have been proposed to solve language generation problems. Transformer is currently state-of-the-art seq-to-seq model in language generation. Reinforcement Learning (RL) is useful in solving exposure bias and the optimisation on non-differentiable metrics in seq-to-seq language learning. However, Transformer is hard to combine with RL as the costly computing resource is required for sampling. We tackle this problem by proposing an off-policy RL learning algorithm where a behaviour policy represented by GRUs performs the sampling. We reduce the high variance of importance sampling (IS) by applying the truncated relative importance sampling (TRIS) technique and Kullback-Leibler (KL)-control concept. TRIS is a simple yet effective technique, and there is a theoretical proof that KL-control helps to reduce the variance of IS. We formulate this off-policy RL based on self-critical sequence training. Specifically, we use a Transformer-based captioning model as the target policy and use an image-guided language auto-encoder as the behaviour policy to explore the environment. The proposed algorithm achieves state-of-the-art performance on the visual paragraph generation and improved results on image captioning.
△ Less
Submitted 21 June, 2020;
originally announced June 2020.
-
ProSelfLC: Progressive Self Label Correction for Training Robust Deep Neural Networks
Authors:
Xinshao Wang,
Yang Hua,
Elyor Kodirov,
David A. Clifton,
Neil M. Robertson
Abstract:
To train robust deep neural networks (DNNs), we systematically study several target modification approaches, which include output regularisation, self and non-self label correction (LC). Two key issues are discovered: (1) Self LC is the most appealing as it exploits its own knowledge and requires no extra models. However, how to automatically decide the trust degree of a learner as training goes i…
▽ More
To train robust deep neural networks (DNNs), we systematically study several target modification approaches, which include output regularisation, self and non-self label correction (LC). Two key issues are discovered: (1) Self LC is the most appealing as it exploits its own knowledge and requires no extra models. However, how to automatically decide the trust degree of a learner as training goes is not well answered in the literature? (2) Some methods penalise while the others reward low-entropy predictions, prompting us to ask which one is better?
To resolve the first issue, taking two well-accepted propositions--deep neural networks learn meaningful patterns before fitting noise [3] and minimum entropy regularisation principle [10]--we propose a novel end-to-end method named ProSelfLC, which is designed according to learning time and entropy. Specifically, given a data point, we progressively increase trust in its predicted label distribution versus its annotated one if a model has been trained for enough time and the prediction is of low entropy (high confidence). For the second issue, according to ProSelfLC, we empirically prove that it is better to redefine a meaningful low-entropy status and optimise the learner toward it. This serves as a defence of entropy minimisation.
We demonstrate the effectiveness of ProSelfLC through extensive experiments in both clean and noisy settings. The source code is available at https://github.com/XinshaoAmosWang/ProSelfLC-CVPR2021.
Keywords: entropy minimisation, maximum entropy, confidence penalty, self knowledge distillation, label correction, label noise, semi-supervised learning, output regularisation
△ Less
Submitted 2 June, 2021; v1 submitted 7 May, 2020;
originally announced May 2020.
-
DADA: Differentiable Automatic Data Augmentation
Authors:
Yonggang Li,
Guosheng Hu,
Yongtao Wang,
Timothy Hospedales,
Neil M. Robertson,
Yongxin Yang
Abstract:
Data augmentation (DA) techniques aim to increase data variability, and thus train deep networks with better generalisation. The pioneering AutoAugment automated the search for optimal DA policies with reinforcement learning. However, AutoAugment is extremely computationally expensive, limiting its wide applicability. Followup works such as Population Based Augmentation (PBA) and Fast AutoAugment…
▽ More
Data augmentation (DA) techniques aim to increase data variability, and thus train deep networks with better generalisation. The pioneering AutoAugment automated the search for optimal DA policies with reinforcement learning. However, AutoAugment is extremely computationally expensive, limiting its wide applicability. Followup works such as Population Based Augmentation (PBA) and Fast AutoAugment improved efficiency, but their optimization speed remains a bottleneck. In this paper, we propose Differentiable Automatic Data Augmentation (DADA) which dramatically reduces the cost. DADA relaxes the discrete DA policy selection to a differentiable optimization problem via Gumbel-Softmax. In addition, we introduce an unbiased gradient estimator, RELAX, leading to an efficient and effective one-pass optimization strategy to learn an efficient and accurate DA policy. We conduct extensive experiments on CIFAR-10, CIFAR-100, SVHN, and ImageNet datasets. Furthermore, we demonstrate the value of Auto DA in pre-training for downstream detection problems. Results show our DADA is at least one order of magnitude faster than the state-of-the-art while achieving very comparable accuracy. The code is available at https://github.com/VDIGPKU/DADA.
△ Less
Submitted 30 July, 2020; v1 submitted 8 March, 2020;
originally announced March 2020.
-
Simulation of electron-proton scattering events by a Feature-Augmented and Transformed Generative Adversarial Network (FAT-GAN)
Authors:
Yasir Alanazi,
N. Sato,
Tianbo Liu,
W. Melnitchouk,
Pawel Ambrozewicz,
Florian Hauenstein,
Michelle P. Kuchera,
Evan Pritchard,
Michael Robertson,
Ryan Strauss,
Luisa Velasco,
Yaohang Li
Abstract:
We apply generative adversarial network (GAN) technology to build an event generator that simulates particle production in electron-proton scattering that is free of theoretical assumptions about underlying particle dynamics. The difficulty of efficiently training a GAN event simulator lies in learning the complicated patterns of the distributions of the particles physical properties. We develop a…
▽ More
We apply generative adversarial network (GAN) technology to build an event generator that simulates particle production in electron-proton scattering that is free of theoretical assumptions about underlying particle dynamics. The difficulty of efficiently training a GAN event simulator lies in learning the complicated patterns of the distributions of the particles physical properties. We develop a GAN that selects a set of transformed features from particle momenta that can be generated easily by the generator, and uses these to produce a set of augmented features that improve the sensitivity of the discriminator. The new Feature-Augmented and Transformed GAN (FAT-GAN) is able to faithfully reproduce the distribution of final state electron momenta in inclusive electron scattering, without the need for input derived from domain-based theoretical assumptions. The developed technology can play a significant role in boosting the science of existing and future accelerator facilities, such as the Electron-Ion Collider.
△ Less
Submitted 27 May, 2021; v1 submitted 29 January, 2020;
originally announced January 2020.
-
ID-aware Quality for Set-based Person Re-identification
Authors:
Xinshao Wang,
Elyor Kodirov,
Yang Hua,
Neil M. Robertson
Abstract:
Set-based person re-identification (SReID) is a matching problem that aims to verify whether two sets are of the same identity (ID). Existing SReID models typically generate a feature representation per image and aggregate them to represent the set as a single embedding. However, they can easily be perturbed by noises--perceptually/semantically low quality images--which are inevitable due to imper…
▽ More
Set-based person re-identification (SReID) is a matching problem that aims to verify whether two sets are of the same identity (ID). Existing SReID models typically generate a feature representation per image and aggregate them to represent the set as a single embedding. However, they can easily be perturbed by noises--perceptually/semantically low quality images--which are inevitable due to imperfect tracking/detection systems, or overfit to trivial images. In this work, we present a novel and simple solution to this problem based on ID-aware quality that measures the perceptual and semantic quality of images guided by their ID information. Specifically, we propose an ID-aware Embedding that consists of two key components: (1) Feature learning attention that aims to learn robust image embeddings by focusing on 'medium' hard images. This way it can prevent overfitting to trivial images, and alleviate the influence of outliers. (2) Feature fusion attention is to fuse image embeddings in the set to obtain the set-level embedding. It ignores noisy information and pays more attention to discriminative images to aggregate more discriminative information. Experimental results on four datasets show that our method outperforms state-of-the-art approaches despite the simplicity of our approach.
△ Less
Submitted 20 November, 2019;
originally announced November 2019.
-
Modular operads and the nerve theorem
Authors:
Philip Hackney,
Marcy Robertson,
Donald Yau
Abstract:
We describe a category of undirected graphs which comes equipped with a faithful functor into the category of (colored) modular operads. The associated singular functor from modular operads to presheaves is fully faithful, and its essential image can be classified by a Segal condition. This theorem can be used to recover a related statement, due to André Joyal and Joachim Kock, concerning a larger…
▽ More
We describe a category of undirected graphs which comes equipped with a faithful functor into the category of (colored) modular operads. The associated singular functor from modular operads to presheaves is fully faithful, and its essential image can be classified by a Segal condition. This theorem can be used to recover a related statement, due to André Joyal and Joachim Kock, concerning a larger category of undirected graphs whose functor to modular operads is not just faithful but also full.
△ Less
Submitted 26 April, 2020; v1 submitted 3 June, 2019;
originally announced June 2019.
-
A graphical category for higher modular operads
Authors:
Philip Hackney,
Marcy Robertson,
Donald Yau
Abstract:
We present a homotopy theory for a weak version of modular operads whose compositions and contractions are only defined up to homotopy. This homotopy theory takes the form of a Quillen model structure on the collection of simplicial presheaves for a certain category of undirected graphs. This new category of undirected graphs, denoted $\mathbf{U}$, plays a similar role for modular operads that the…
▽ More
We present a homotopy theory for a weak version of modular operads whose compositions and contractions are only defined up to homotopy. This homotopy theory takes the form of a Quillen model structure on the collection of simplicial presheaves for a certain category of undirected graphs. This new category of undirected graphs, denoted $\mathbf{U}$, plays a similar role for modular operads that the dendroidal category $Ω$ plays for operads. We carefully study properties of $\mathbf{U}$, including the existence of certain factorization systems. Related structures, such as cyclic operads and stable modular operads, can be similarly treated using categories derived from $\mathbf{U}$.
△ Less
Submitted 31 December, 2019; v1 submitted 3 June, 2019;
originally announced June 2019.
-
Derivative Manipulation for General Example Weighting
Authors:
Xinshao Wang,
Elyor Kodirov,
Yang Hua,
Neil M. Robertson
Abstract:
Real-world large-scale datasets usually contain noisy labels and are imbalanced. Therefore, we propose derivative manipulation (DM), a novel and general example weighting approach for training robust deep models under these adverse conditions.
DM has two main merits. First, loss function and example weighting are common techniques in the literature. DM reveals their connection (a loss function d…
▽ More
Real-world large-scale datasets usually contain noisy labels and are imbalanced. Therefore, we propose derivative manipulation (DM), a novel and general example weighting approach for training robust deep models under these adverse conditions.
DM has two main merits. First, loss function and example weighting are common techniques in the literature. DM reveals their connection (a loss function does example weighting) and is a replacement of both. Second, despite that a loss defines an example weighting scheme by its derivative, in the loss design, we need to consider whether it is differentiable. Instead, DM is more flexible by directly modifying the derivative so that a loss can be a non-elementary format too. Technically, DM defines an emphasis density function by a derivative magnitude function. DM is generic in that diverse weighting schemes can be derived.
Extensive experiments on both vision and language tasks prove DM's effectiveness.
△ Less
Submitted 3 October, 2020; v1 submitted 27 May, 2019;
originally announced May 2019.
-
IMAE for Noise-Robust Learning: Mean Absolute Error Does Not Treat Examples Equally and Gradient Magnitude's Variance Matters
Authors:
Xinshao Wang,
Yang Hua,
Elyor Kodirov,
David A. Clifton,
Neil M. Robertson
Abstract:
In this work, we study robust deep learning against abnormal training data from the perspective of example weighting built in empirical loss functions, i.e., gradient magnitude with respect to logits, an angle that is not thoroughly studied so far. Consequently, we have two key findings: (1) Mean Absolute Error (MAE) Does Not Treat Examples Equally. We present new observations and insightful analy…
▽ More
In this work, we study robust deep learning against abnormal training data from the perspective of example weighting built in empirical loss functions, i.e., gradient magnitude with respect to logits, an angle that is not thoroughly studied so far. Consequently, we have two key findings: (1) Mean Absolute Error (MAE) Does Not Treat Examples Equally. We present new observations and insightful analysis about MAE, which is theoretically proved to be noise-robust. First, we reveal its underfitting problem in practice. Second, we analyse that MAE's noise-robustness is from emphasising on uncertain examples instead of treating training samples equally, as claimed in prior work. (2) The Variance of Gradient Magnitude Matters. We propose an effective and simple solution to enhance MAE's fitting ability while preserving its noise-robustness. Without changing MAE's overall weighting scheme, i.e., what examples get higher weights, we simply change its weighting variance non-linearly so that the impact ratio between two examples are adjusted. Our solution is termed Improved MAE (IMAE). We prove IMAE's effectiveness using extensive experiments: image classification under clean labels, synthetic label noise, and real-world unknown noise.
△ Less
Submitted 1 May, 2023; v1 submitted 28 March, 2019;
originally announced March 2019.
-
GAN-based Pose-aware Regulation for Video-based Person Re-identification
Authors:
Alessandro Borgia,
Yang Hua,
Elyor Kodirov,
Neil M. Robertson
Abstract:
Video-based person re-identification deals with the inherent difficulty of matching unregulated sequences with different length and with incomplete target pose/viewpoint structure. Common approaches operate either by reducing the problem to the still images case, facing a significant information loss, or by exploiting inter-sequence temporal dependencies as in Siamese Recurrent Neural Networks or…
▽ More
Video-based person re-identification deals with the inherent difficulty of matching unregulated sequences with different length and with incomplete target pose/viewpoint structure. Common approaches operate either by reducing the problem to the still images case, facing a significant information loss, or by exploiting inter-sequence temporal dependencies as in Siamese Recurrent Neural Networks or in gait analysis. However, in all cases, the inter-sequences pose/viewpoint misalignment is not considered, and the existing spatial approaches are mostly limited to the still images context. To this end, we propose a novel approach that can exploit more effectively the rich video information, by accounting for the role that the changing pose/viewpoint factor plays in the sequences matching process. Specifically, our approach consists of two components. The first one attempts to complement the original pose-incomplete information carried by the sequences with synthetic GAN-generated images, and fuse their feature vectors into a more discriminative viewpoint-insensitive embedding, namely Weighted Fusion (WF). Another one performs an explicit pose-based alignment of sequence pairs to promote coherent feature matching, namely Weighted-Pose Regulation (WPR). Extensive experiments on two large video-based benchmark datasets show that our approach outperforms considerably existing methods.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Semantic Alignment: Finding Semantically Consistent Ground-truth for Facial Landmark Detection
Authors:
Zhiwei Liu,
Xiangyu Zhu,
Guosheng Hu,
Haiyun Guo,
Ming Tang,
Zhen Lei,
Neil M. Robertson,
**qiao Wang
Abstract:
Recently, deep learning based facial landmark detection has achieved great success. Despite this, we notice that the semantic ambiguity greatly degrades the detection performance. Specifically, the semantic ambiguity means that some landmarks (e.g. those evenly distributed along the face contour) do not have clear and accurate definition, causing inconsistent annotations by annotators. Accordingly…
▽ More
Recently, deep learning based facial landmark detection has achieved great success. Despite this, we notice that the semantic ambiguity greatly degrades the detection performance. Specifically, the semantic ambiguity means that some landmarks (e.g. those evenly distributed along the face contour) do not have clear and accurate definition, causing inconsistent annotations by annotators. Accordingly, these inconsistent annotations, which are usually provided by public databases, commonly work as the ground-truth to supervise network training, leading to the degraded accuracy. To our knowledge, little research has investigated this problem. In this paper, we propose a novel probabilistic model which introduces a latent variable, i.e. the 'real' ground-truth which is semantically consistent, to optimize. This framework couples two parts (1) training landmark detection CNN and (2) searching the 'real' ground-truth. These two parts are alternatively optimized: the searched 'real' ground-truth supervises the CNN training; and the trained CNN assists the searching of 'real' ground-truth. In addition, to recover the unconfidently predicted landmarks due to occlusion and low quality, we propose a global heatmap correction unit (GHCU) to correct outliers by considering the global face shape as a constraint. Extensive experiments on both image-based (300W and AFLW) and video-based (300-VW) databases demonstrate that our method effectively improves the landmark detection accuracy and achieves the state of the art performance.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Ranked List Loss for Deep Metric Learning
Authors:
Xinshao Wang,
Yang Hua,
Elyor Kodirov,
Neil M. Robertson
Abstract:
The objective of deep metric learning (DML) is to learn embeddings that can capture semantic similarity and dissimilarity information among data points. Existing pairwise or tripletwise loss functions used in DML are known to suffer from slow convergence due to a large proportion of trivial pairs or triplets as the model improves. To improve this, ranking-motivated structured losses are proposed r…
▽ More
The objective of deep metric learning (DML) is to learn embeddings that can capture semantic similarity and dissimilarity information among data points. Existing pairwise or tripletwise loss functions used in DML are known to suffer from slow convergence due to a large proportion of trivial pairs or triplets as the model improves. To improve this, ranking-motivated structured losses are proposed recently to incorporate multiple examples and exploit the structured information among them. They converge faster and achieve state-of-the-art performance. In this work, we unveil two limitations of existing ranking-motivated structured losses and propose a novel ranked list loss to solve both of them. First, given a query, only a fraction of data points is incorporated to build the similarity structure. Consequently, some useful examples are ignored and the structure is less informative. To address this, we propose to build a set-based similarity structure by exploiting all instances in the gallery. The learning setting can be interpreted as few-shot retrieval: given a mini-batch, every example is iteratively used as a query, and the rest ones compose the gallery to search, i.e., the support set in few-shot setting. The rest examples are split into a positive set and a negative set. For every mini-batch, the learning objective of ranked list loss is to make the query closer to the positive set than to the negative set by a margin. Second, previous methods aim to pull positive pairs as close as possible in the embedding space. As a result, the intraclass data distribution tends to be extremely compressed. In contrast, we propose to learn a hypersphere for each class in order to preserve useful similarity structure inside it, which functions as regularisation. Extensive experiments demonstrate the superiority of our proposal by comparing with the state-of-the-art methods.
△ Less
Submitted 19 March, 2021; v1 submitted 7 March, 2019;
originally announced March 2019.
-
Deep Metric Learning by Online Soft Mining and Class-Aware Attention
Authors:
Xinshao Wang,
Yang Hua,
Elyor Kodirov,
Guosheng Hu,
Neil M. Robertson
Abstract:
Deep metric learning aims to learn a deep embedding that can capture the semantic similarity of data points. Given the availability of massive training samples, deep metric learning is known to suffer from slow convergence due to a large fraction of trivial samples. Therefore, most existing methods generally resort to sample mining strategies for selecting nontrivial samples to accelerate converge…
▽ More
Deep metric learning aims to learn a deep embedding that can capture the semantic similarity of data points. Given the availability of massive training samples, deep metric learning is known to suffer from slow convergence due to a large fraction of trivial samples. Therefore, most existing methods generally resort to sample mining strategies for selecting nontrivial samples to accelerate convergence and improve performance. In this work, we identify two critical limitations of the sample mining methods, and provide solutions for both of them. First, previous mining methods assign one binary score to each sample, i.e., drop** or kee** it, so they only selects a subset of relevant samples in a mini-batch. Therefore, we propose a novel sample mining method, called Online Soft Mining (OSM), which assigns one continuous score to each sample to make use of all samples in the mini-batch. OSM learns extended manifolds that preserve useful intraclass variances by focusing on more similar positives. Second, the existing methods are easily influenced by outliers as they are generally included in the mined subset. To address this, we introduce Class-Aware Attention (CAA) that assigns little attention to abnormal data samples. Furthermore, by combining OSM and CAA, we propose a novel weighted contrastive loss to learn discriminative embeddings. Extensive experiments on two fine-grained visual categorisation datasets and two video-based person re-identification benchmarks show that our method significantly outperforms the state-of-the-art.
△ Less
Submitted 3 December, 2019; v1 submitted 4 November, 2018;
originally announced November 2018.
-
Properties of selected structural and flat flexible cabling materials for low temperature applications
Authors:
M. Daal,
N. Zobrist,
N. Kellaris,
B. Sadoulet,
M. Robertson
Abstract:
We present measurements of the low temperature thermal conductivity for materials useful in the construction of cryogenic supports for scientific instrumentation and in the fabrication of flat flexible cryogenic cabling. The materials we measure have relatively low thermal conductivity. We present a method for measuring the heat transfer coefficient of flat cabling and show, using an example, that…
▽ More
We present measurements of the low temperature thermal conductivity for materials useful in the construction of cryogenic supports for scientific instrumentation and in the fabrication of flat flexible cryogenic cabling. The materials we measure have relatively low thermal conductivity. We present a method for measuring the heat transfer coefficient of flat cabling and show, using an example, that the thermal conductivity of a flex cable is reasonably well predicted by composing the thermal conductivities of its constituent material layers. Room temperature physical and mechanical data is given for the materials studied, as well as an overview of relevant materials science and manufacturing details. Materials include Timet Ti 15-3 and Ti 21S, Materion alloy vit105 (LM105) in amorphous state, ATI Metals Nb-47Ti, Johnson Matthey nitinol (NiTi), Mersen graphite grade 2020, DuPont Pyralux coverlay and Vespel SCP-5050, and Fralock Cirlex polyimide sheets. All data is in the temperature range 0.5 to 2 K, and up to 5 K for SCP-5050.
△ Less
Submitted 10 January, 2019; v1 submitted 24 October, 2018;
originally announced October 2018.
-
Overview of the spectrometer optical fiber feed for the Habitable-zone Planet Finder
Authors:
Shubham Kanodia,
Suvrath Mahadevan,
Lawrence. W. Ramsey,
Gudmundur K. Stefansson,
Andrew J. Monson,
Frederick R. Hearty,
Scott Blakeslee,
Emily Lubar,
Chad F. Bender,
J. P. Ninan,
David Sterner,
Arpita Roy,
Samuel P. Halverson,
Paul M. Robertson
Abstract:
The Habitable-zone Planet Finder (HPF) is a highly stabilized fiber fed precision radial velocity (RV) spectrograph working in the Near Infrared (NIR): 810 - 1280 nm . In this paper we present an overview of the preparation of the optical fibers for HPF. The entire fiber train from the telescope focus down to the cryostat is detailed. We also discuss the fiber polishing, splicing and its integrati…
▽ More
The Habitable-zone Planet Finder (HPF) is a highly stabilized fiber fed precision radial velocity (RV) spectrograph working in the Near Infrared (NIR): 810 - 1280 nm . In this paper we present an overview of the preparation of the optical fibers for HPF. The entire fiber train from the telescope focus down to the cryostat is detailed. We also discuss the fiber polishing, splicing and its integration into the instrument using a fused silica puck. HPF was designed to be able to operate in two modes, High Resolution (HR- the only mode mode currently commissioned) and High Efficiency (HE). We discuss these fiber heads and the procedure we adopted to attach the slit on to the HR fibers.
△ Less
Submitted 1 August, 2018;
originally announced August 2018.
-
Veloce Rosso: Australia's new precision radial velocity spectrograph
Authors:
James Gilbert,
Christoph Bergmann,
Gabe Bloxham,
Robert Boz,
Robert Brookfield,
Tom Carkic,
Brad Carter,
Scott Case,
Vladimir Churilov,
Michael Ellis,
Gaston Gausachs,
Luke Gers,
Doug Gray,
Nicholas Herrald,
Michael Ireland,
Damien Jones,
Yevgen Kripak,
Jon Lawrence,
Ellie O'Brien,
Ian Price,
Matthew Robertson,
Christian Schwab,
Chris Tinney,
Annino Vaccarella,
Colin Vest
, et al. (2 additional authors not shown)
Abstract:
Veloce is an ultra-stable fibre-fed R4 echelle spectrograph for the 3.9 m Anglo-Australian Telescope. The first channel to be commissioned, Veloce 'Rosso', utilises multiple low-cost design innovations to obtain Doppler velocities for Sun-like and M-dwarf stars at <1 m/s precision. The spectrograph has an asymmetric white-pupil format with a 100-mm beam diameter, delivering R>75,000 spectra over a…
▽ More
Veloce is an ultra-stable fibre-fed R4 echelle spectrograph for the 3.9 m Anglo-Australian Telescope. The first channel to be commissioned, Veloce 'Rosso', utilises multiple low-cost design innovations to obtain Doppler velocities for Sun-like and M-dwarf stars at <1 m/s precision. The spectrograph has an asymmetric white-pupil format with a 100-mm beam diameter, delivering R>75,000 spectra over a 580-950 nm range for the Rosso channel. Simultaneous calibration is provided by a single-mode pulsed laser frequency comb in tandem with a traditional arc lamp. A bundle of 19 object fibres provides a 2.4" field of view for full sampling of stellar targets from the AAT site. Veloce is housed in dual environmental enclosures that maintain positive air pressure at a stability of +/-0.3 mbar, with a thermal stability of +/-0.01 K on the optical bench. We present a technical overview and early performance data from Australia's next major spectroscopic machine.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Discovery of a New Quasar: SDSS J022155.26-064916.6
Authors:
Jacob M. Robertson,
Douglas L. Tucker,
J. Allyn Smith,
William Wester,
Haun Lin,
Jack H. Mueller,
Deborah J. Gulledge
Abstract:
We report the discovery of a new quasar: SDSS J022155.26-064916.6. This object was discovered while reducing spectra of a sample of stars being considered as spectrophotometric standards for the Dark Energy Survey. The flux and wavelength calibrated spectrum is presented with four spectral lines identified. From these lines, the redshift is determined to be z is approximately equal to 0.806. In ad…
▽ More
We report the discovery of a new quasar: SDSS J022155.26-064916.6. This object was discovered while reducing spectra of a sample of stars being considered as spectrophotometric standards for the Dark Energy Survey. The flux and wavelength calibrated spectrum is presented with four spectral lines identified. From these lines, the redshift is determined to be z is approximately equal to 0.806. In addition, the rest-frame u-, g-, and r-band luminosity, determined using a k-correction obtained with synthetic photometry of a proxy QSO, are reported as 7.496 $\times 10^{13}$ solar luminosities, 2.049 $\times 10^{13}$ solar luminosities, and $1.896 \times 10^{13}$ solar luminosities, respectively.
△ Less
Submitted 10 September, 2017;
originally announced September 2017.
-
On factorizations of graphical maps
Authors:
Philip Hackney,
Marcy Robertson,
Donald Yau
Abstract:
We study the categories governing infinity (wheeled) properads. The graphical category, which was already known to be generalized Reedy, is in fact an Eilenberg-Zilber category. A minor alteration to the definition of the wheeled graphical category allows us to show that it is a generalized Reedy category. Finally, we present model structures for Segal properads and Segal wheeled properads.
We study the categories governing infinity (wheeled) properads. The graphical category, which was already known to be generalized Reedy, is in fact an Eilenberg-Zilber category. A minor alteration to the definition of the wheeled graphical category allows us to show that it is a generalized Reedy category. Finally, we present model structures for Segal properads and Segal wheeled properads.
△ Less
Submitted 14 April, 2018; v1 submitted 23 May, 2017;
originally announced May 2017.
-
Layer dependent role of collagen recruitment during loading of the rat bladder wall
Authors:
Fangzhou Cheng,
Anne M. Robertson,
Lori Birder,
F. Aura Kullmann,
Jack Hornsby,
Paul Watton,
Simon C. Watkins
Abstract:
In this work, we reevaluated long standing conjectures as to the source of the exceptionally large compliance of the bladder wall. Whereas, these conjectures were based on indirect measures of loading mechanisms, in this work we take advantage of advances in bioimaging to directly assess collagen fibers and wall architecture during loading. A custom biaxial mechanical testing system compatible wit…
▽ More
In this work, we reevaluated long standing conjectures as to the source of the exceptionally large compliance of the bladder wall. Whereas, these conjectures were based on indirect measures of loading mechanisms, in this work we take advantage of advances in bioimaging to directly assess collagen fibers and wall architecture during loading. A custom biaxial mechanical testing system compatible with multiphoton microscopy (MPM) was used to directly measure the layer dependent collagen fiber recruitment in bladder tissue from 9 male Fischer rats (4 adult and 5 aged). As for other soft tissues, the bladder loading curve was exponential in shape and could be divided into toe, transition and high stress regimes. The relationship between collagen recruitment and loading curves were evaluated in the context of the inner bladder wall (lamina propria) and outer detrusor smooth muscle layer. The large extensibility of the bladder was found to be possible due to folds in the wall (rugae) that provide a mechanism for low resistance flattening without any discernible recruitment of collagen fibers throughout the toe regime. For elastic bladders, as the loading extended into the transition regime, a gradual coordinated recruitment of collagen fibers between the lamina propria and detrusor smooth muscle layers was found. A second important finding is that wall extensibility could be lost by premature recruitment of collagen in the outer wall that cut short the toe region. This work provides, for the first time, a mechanistic understanding of the role of collagen recruitment in determining bladder capacitance.
△ Less
Submitted 9 May, 2017;
originally announced May 2017.
-
Operads of genus zero curves and the Grothendieck-Teichmüller group
Authors:
Pedro Boavida de Brito,
Geoffroy Horel,
Marcy Robertson
Abstract:
We show that the group of homotopy automorphisms of the profinite completion of the genus zero surface operad is isomorphic to the (profinite) Grothendieck-Teichmüller group. Using a result of Drummond-Cole, we deduce that the Grothendieck-Teichmüller group acts nontrivially on $\overline{\mathcal{M}}_{0,\bullet+1}$, the operad of stable curves of genus zero. As a second application, we give an al…
▽ More
We show that the group of homotopy automorphisms of the profinite completion of the genus zero surface operad is isomorphic to the (profinite) Grothendieck-Teichmüller group. Using a result of Drummond-Cole, we deduce that the Grothendieck-Teichmüller group acts nontrivially on $\overline{\mathcal{M}}_{0,\bullet+1}$, the operad of stable curves of genus zero. As a second application, we give an alternative proof that the framed little 2-disks operad is formal.
△ Less
Submitted 15 March, 2017;
originally announced March 2017.
-
Sensor scheduling with time, energy and communication constraints
Authors:
Cristian Rusu,
John Thompson,
Neil M. Robertson
Abstract:
In this paper we present new algorithms and analysis for the linear inverse sensor placement and scheduling problems over multiple time instances with power and communications constraints. The proposed algorithms, which deal directly with minimizing the mean squared error (MSE), are based on the convex relaxation approach to address the binary optimization scheduling problems that are formulated i…
▽ More
In this paper we present new algorithms and analysis for the linear inverse sensor placement and scheduling problems over multiple time instances with power and communications constraints. The proposed algorithms, which deal directly with minimizing the mean squared error (MSE), are based on the convex relaxation approach to address the binary optimization scheduling problems that are formulated in sensor network scenarios. We propose to balance the energy and communications demands of operating a network of sensors over time while we still guarantee a minimum level of estimation accuracy. We measure this accuracy by the MSE for which we provide average case and lower bounds analyses that hold in general, irrespective of the scheduling algorithm used. We show experimentally how the proposed algorithms perform against state-of-the-art methods previously described in the literature.
△ Less
Submitted 6 November, 2017; v1 submitted 16 February, 2017;
originally announced February 2017.
-
Interface mediated mechanisms of plastic strain recovery in AgCu alloy
Authors:
B. P. Eftink,
A. Li,
I. Szlufarska,
I. M. Robertson
Abstract:
Through the combination of transmission electron microscopy analysis of the deformed microstructure and molecular dynamics computer simulations of the deformation processes, the mechanisms of plastic strain recovery in bulk AgCu eutectic with either incoherent twin or cube-on-cube interfaces between the Ag and Cu layers and a bilayer thickness of 500 nm have been revealed. The character of the inc…
▽ More
Through the combination of transmission electron microscopy analysis of the deformed microstructure and molecular dynamics computer simulations of the deformation processes, the mechanisms of plastic strain recovery in bulk AgCu eutectic with either incoherent twin or cube-on-cube interfaces between the Ag and Cu layers and a bilayer thickness of 500 nm have been revealed. The character of the incoherent twin interfaces changed uniquely after dynamic compressive loading for samples that exhibited plastic strain recovery and was found to drive the recovery, which is due to dislocation retraction and rearrangement of the interfaces. The magnitude of the recovery decreased with increasing strain as dislocation tangles and dislocation cell structures formed. No change in the orientation relationship was found at cube-on-cube interfaces and these exhibited a lesser amount of plastic strain recovery in the simulations and none experimentally in samples with larger layer thicknesses with predominantly cube-on-cube interfaces. Molecular dynamics computer simulations verified the importance of the change in the incoherent twin interface structure as the driving force for dislocation annihilation at the interfaces and the plastic strain recovery.
△ Less
Submitted 11 January, 2017;
originally announced January 2017.
-
Deep Convolutional Poses for Human Interaction Recognition in Monocular Videos
Authors:
Marcel Sheeny de Moraes,
Sankha Mukherjee,
Neil M Robertson
Abstract:
Human interaction recognition is a challenging problem in computer vision and has been researched over the years due to its important applications. With the development of deep models for the human pose estimation problem, this work aims to verify the effectiveness of using the human pose in order to recognize the human interaction in monocular videos. This paper developed a method based on 5 step…
▽ More
Human interaction recognition is a challenging problem in computer vision and has been researched over the years due to its important applications. With the development of deep models for the human pose estimation problem, this work aims to verify the effectiveness of using the human pose in order to recognize the human interaction in monocular videos. This paper developed a method based on 5 steps: detect each person in the scene, track them, retrieve the human pose, extract features based on the pose and finally recognize the interaction using a classifier. The Two-Person interaction dataset was used for the development of this methodology. Using a whole sequence evaluation approach it achieved 87.56% of average accuracy of all interaction. Yun, et at achieved 91.10% using the same dataset, however their methodology used the depth sensor to recognize the interaction. The methodology developed in this paper shows that an RGB camera can be as effective as depth cameras to recognize the interaction between two persons using the recent development of deep models to estimate the human pose.
△ Less
Submitted 12 December, 2016;
originally announced December 2016.
-
Higher cyclic operads
Authors:
Philip Hackney,
Marcy Robertson,
Donald Yau
Abstract:
We introduce a convenient definition for weak cyclic operads, which is based on unrooted trees and Segal conditions. More specifically, we introduce a category $Ξ$ of trees, which carries a tight relationship to the Moerdijk-Weiss category of rooted trees $Ω$. We prove a nerve theorem exhibiting colored cyclic operads as presheaves on $Ξ$ which satisfy a Segal condition. Finally, we produce a Quil…
▽ More
We introduce a convenient definition for weak cyclic operads, which is based on unrooted trees and Segal conditions. More specifically, we introduce a category $Ξ$ of trees, which carries a tight relationship to the Moerdijk-Weiss category of rooted trees $Ω$. We prove a nerve theorem exhibiting colored cyclic operads as presheaves on $Ξ$ which satisfy a Segal condition. Finally, we produce a Quillen model category whose fibrant objects satisfy a weak Segal condition, and we consider these objects as an up-to-homotopy generalization of the concept of cyclic operad.
△ Less
Submitted 11 August, 2018; v1 submitted 8 November, 2016;
originally announced November 2016.
-
Lecture notes on infinity-properads
Authors:
Philip Hackney,
Marcy Robertson
Abstract:
These are notes for three lectures on higher properads given at a program at the mathematical institute MATRIX in Australia in June 2016. The first lecture covers the case of operads, and provides a brief introduction to the Moerdijk-Weiss theory of dendroidal sets. The second lecture extends the discussion to properads and our work with Donald Yau on graphical sets. These two lectures conclude wi…
▽ More
These are notes for three lectures on higher properads given at a program at the mathematical institute MATRIX in Australia in June 2016. The first lecture covers the case of operads, and provides a brief introduction to the Moerdijk-Weiss theory of dendroidal sets. The second lecture extends the discussion to properads and our work with Donald Yau on graphical sets. These two lectures conclude with models for higher (pr)operads given by an inner horn filling condition. Finally, in the last lecture, we explore some properties of the graphical category and use them to give a Segal-type model for higher properads.
△ Less
Submitted 29 November, 2016; v1 submitted 3 October, 2016;
originally announced October 2016.