-
Heteroepitaxial growth of anatase (0 0 1) films on SrTiO3 (0 0 1) by PLD and MBE
Authors:
A. Crespo,
J. Gallenberger,
Maurizio de Santis,
V. Langlais,
F. Carla,
J. M. Caicedo,
J. Rius,
X. Torrelles
Abstract:
The epitaxial growth of anatase (001) films deposited by pulsed laser deposition (PLD) and molecular beam epitaxy (MBE) on SrTiO3 (001) (STO) single crystals has been studied using X-ray diffraction and surface sensitivity UHV techniques. The evolution of the strain represented by the microstrain and the change of the in-plane and out-of-plane lattice parameters with film growth temperature, the e…
▽ More
The epitaxial growth of anatase (001) films deposited by pulsed laser deposition (PLD) and molecular beam epitaxy (MBE) on SrTiO3 (001) (STO) single crystals has been studied using X-ray diffraction and surface sensitivity UHV techniques. The evolution of the strain represented by the microstrain and the change of the in-plane and out-of-plane lattice parameters with film growth temperature, the effect of the annealing temperature and the influence of the oxygen content of the film have been investigated.The out-of-plane lattice strain shows a compressive (-0.2%) or expansive (+0.3%) behavior, in the range 600-900$^\circ$C, for temperatures below or above 700$^\circ$C, respectively. The in-plane lattice parameters, as well as the cell volume of the film, remain under compression over the entire temperature range explored.PLD films grow into square islands that align with the surface lattice directions of the STO substrate. The maximum size of these islands is reached at growth temperatures close to 875-925$^\circ$C. Film annealing at temperatures of 800$^\circ$C or higher melts the islands into flat terraces. Larger terraces are reached at high annealing temperatures of 925$^\circ$C for extended periods of 12 hours. This procedure allows flat surface terrace sizes of up to 650 nm to be achieved.The crystalline quality achieved in anatase films prepared by PLD or MBE growth methods is similar. The two-step anatase growth process used during the synthesis of the films with both methods: film growth and post-annealing treatment in oxygen or air at ambient pressure, using temperature and time as key parameters, allows to control the surface terrace size and stoichiometry of the films, as well as the anatase/rutile intermixing rates at sufficiently high temperatures. This growth process could allow the substitution of their equivalent single crystals. The range of applicability of these films would include their use as structural and electronic model systems, or in harsh experimental conditions due to their low production cost.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Mie Scattering with 3D Angular Spectrum Method
Authors:
Joel Lamberg,
Faezeh Zarrinkhat,
Aleksi Tamminen,
Mariangela Baggio,
Juha Ala-Laurinaho,
Juan Rius,
Jordi Romeu,
Elsayed E. M. Khaled,
Zachary Taylor
Abstract:
Mie theory is a powerful method to model electromagnetic scattering from a multilayered sphere. Usually, the incident beam is expanded to its vector spherical harmonic representation defined by beam shape coefficients, and the multilayer sphere scattering is obtained by the T-matrix method. However, obtaining the beam shape coefficients for arbitrarily shaped incident beams has limitations on sour…
▽ More
Mie theory is a powerful method to model electromagnetic scattering from a multilayered sphere. Usually, the incident beam is expanded to its vector spherical harmonic representation defined by beam shape coefficients, and the multilayer sphere scattering is obtained by the T-matrix method. However, obtaining the beam shape coefficients for arbitrarily shaped incident beams has limitations on source locations and requires different methods when the incident beam is defined inside or outside the computational domain or at the scatterer surface. We propose a 3D angular spectrum method for defining beam shape coefficients from arbitrary source field distributions. This method enables the placement of the sources freely within the computational domain without singularities, allowing flexibility in beam design. We demonstrate incident field synthesis and spherical scattering by comparing morphology-dependent resonances to known values, achieving excellent matching and high accuracy. Additionally, we present mathematical proof to support our proposal. The proposed method has significant benefits for optical systems and inverse beam design. It allows for the analysis of electromagnetic forward/backward propagation between optical elements and spherical targets using a single method. It is also valuable for optical force beam design and analysis.
△ Less
Submitted 25 April, 2023; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Coupling to longitudinal modes in spherical thin shells illuminated by submillimeter wave Gaussian beam: applications to corneal sensing
Authors:
Faezeh Zarrinkhat,
Joel Lamberg,
Aleksi Tamminen,
Mariangela Baggio,
Juha Ala-Laurinaho,
Elsayed E. M. Khaled,
Juan Rius,
Jordi Romeu,
Zachary Taylor
Abstract:
Coupling to longitudinal modes of thin spherical shells, under Gaussian-beam illumination, was explored with a theoretical method based on Fourier-optics analysis and vector spherical harmonics. The illumination frequency band was fixed between 100-600 GHz and the outer spherical shell radius of curvature and thickness are 7.5 mm and 0.5 mm, respectively. The shell material was either the lossless…
▽ More
Coupling to longitudinal modes of thin spherical shells, under Gaussian-beam illumination, was explored with a theoretical method based on Fourier-optics analysis and vector spherical harmonics. The illumination frequency band was fixed between 100-600 GHz and the outer spherical shell radius of curvature and thickness are 7.5 mm and 0.5 mm, respectively. The shell material was either the lossless cornea or an aqueous effective media representing the cornea. Six different beam-target strategies were introduced being potential candidates for maximum coupling. Two dispersion-tuned beam ensembles with strongly frequency-dependent phase center location have been created with a fixed incident beam 1/e radius and radius of curvature called forward strategies. These computations of different alignments were continued with four beam ensembles of frequency-invariant phase center, constructed from fits to experimental data, oriented at four different axial locations with respect to the spherical shell center of curvature, they are called reverse strategies. Coupling efficiency for all strategies was calculated for different targets including PEC sphere, air-core, and PEC core covered by a cornea loss-free layer and cornea. All scattering strategies contrasted to scattering from equivalent planar targets as a reference with maximum coupling. The results show that, under an ideal calibration, forward strategies are a closer approximation to the plane-wave condition. However, target properties influence the coupling efficiency remarkably for instance the observed difference in cornea scattering is vanishingly small as dielectric loss limits walk-off loss. Furthermore, under perturbed calibration, the forward strategies showed less sensitivity.
△ Less
Submitted 30 November, 2021;
originally announced December 2021.
-
A Monte Carlo method for solving the electromagnetic scattering problem in dielectric bodies
Authors:
Hector Lopez-Menchon,
Juan M. Rius,
Alexander Heldring,
Eduard Ubeda
Abstract:
In this work, we develop a novel Monte Carlo method for solving the electromagnetic scattering problem. The method is based on a formal solution of the scattering problem as a modified Born series whose coefficients are found by a conformal transformation. The terms of the Born series are approximated by sampling random elements of its matrix representation, computed by the Method of Moments. Unli…
▽ More
In this work, we develop a novel Monte Carlo method for solving the electromagnetic scattering problem. The method is based on a formal solution of the scattering problem as a modified Born series whose coefficients are found by a conformal transformation. The terms of the Born series are approximated by sampling random elements of its matrix representation, computed by the Method of Moments. Unlike other techniques as the Fast Multiple Method, this Monte Carlo method does not require communications between processors, which makes it suitable for large parallel executions.
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
C2MS: Dynamic Monitoring and Management of Cloud Infrastructures
Authors:
Gary A. McGilvary,
Josep Rius,
Íñigo Goiri,
Francesc Solsona,
Adam Barker,
Malcolm Atkinson
Abstract:
Server clustering is a common design principle employed by many organisations who require high availability, scalability and easier management of their infrastructure. Servers are typically clustered according to the service they provide whether it be the application(s) installed, the role of the server or server accessibility for example. In order to optimize performance, manage load and maintain…
▽ More
Server clustering is a common design principle employed by many organisations who require high availability, scalability and easier management of their infrastructure. Servers are typically clustered according to the service they provide whether it be the application(s) installed, the role of the server or server accessibility for example. In order to optimize performance, manage load and maintain availability, servers may migrate from one cluster group to another making it difficult for server monitoring tools to continuously monitor these dynamically changing groups. Server monitoring tools are usually statically configured and with any change of group membership requires manual reconfiguration; an unreasonable task to undertake on large-scale cloud infrastructures.
In this paper we present the Cloudlet Control and Management System (C2MS); a system for monitoring and controlling dynamic groups of physical or virtual servers within cloud infrastructures. The C2MS extends Ganglia - an open source scalable system performance monitoring tool - by allowing system administrators to define, monitor and modify server groups without the need for server reconfiguration. In turn administrators can easily monitor group and individual server metrics on large-scale dynamic cloud infrastructures where roles of servers may change frequently. Furthermore, we complement group monitoring with a control element allowing administrator-specified actions to be performed over servers within service groups as well as introduce further customized monitoring metrics. This paper outlines the design, implementation and evaluation of the C2MS.
△ Less
Submitted 3 October, 2013;
originally announced October 2013.
-
Solving and refining novel thin film phases using Cu X-ray radiation: the epitaxy-induced CuMnAs tetragonal phase
Authors:
P. Wadley,
A. Crespi,
J. Gazquez,
M. A. Roldan,
P. Garcia,
V. Novak,
R. Campion,
T. Jungwirth,
C. Rinaldi,
X. Marti,
V. Holy,
C. Frontera,
J. Rius
Abstract:
We present a combined experimental and computational method which enables the precise determination of the atomic positions in a thin film using CuKα radiation, only. The capabilities of this technique surpass simple structure refinement and allow solving unknown phases stabilized by substrate-induced stress. We derive the appropriate corrections to transform the measured integrated intensities in…
▽ More
We present a combined experimental and computational method which enables the precise determination of the atomic positions in a thin film using CuKα radiation, only. The capabilities of this technique surpass simple structure refinement and allow solving unknown phases stabilized by substrate-induced stress. We derive the appropriate corrections to transform the measured integrated intensities into structure factors. Data collection was performed entirely on routinely available laboratory diffractometers (CuKα radiation); the subsequent analysis was carried out by single-crystal direct methods (δ recycling procedure) followed by the least-squares refinement of the structural parameters of the unit cell content. We selected an epitaxial thin film of CuMnAs grown on top of a GaAs substrate, which formed a crystal structure with tetragonal symmetry, differing from the bulk material which is orthorhombic. Here we demonstrate the new tetragonal form of epitaxial CuMnAs grown on GaAs substrate and present consistent high-resolution scanning transmission electron microscopy and stoichiometry analyses.
△ Less
Submitted 22 January, 2013;
originally announced January 2013.
-
About the oscillatory possibilities of the dynamical systems
Authors:
R. Herrero,
F. Pi,
J. Rius,
G. Orriols
Abstract:
This paper attempts to make feasible the evolutionary emergence of novelty in a supposedly deterministic world which behavior is associated with those of the mathematical dynamical systems. The work was motivated by the observation of complex oscillatory behaviors in a family of physical devices, for which there is no known explanation in the mainstream of nonlinear dynamics. The paper begins by d…
▽ More
This paper attempts to make feasible the evolutionary emergence of novelty in a supposedly deterministic world which behavior is associated with those of the mathematical dynamical systems. The work was motivated by the observation of complex oscillatory behaviors in a family of physical devices, for which there is no known explanation in the mainstream of nonlinear dynamics. The paper begins by describing a nonlinear mechanism of oscillatory mode mixing explaining such behaviors and establishes a generic dynamical scenario with extraordinary oscillatory possibilities, including expansive growing scalability. The relation of the scenario to the oscillatory behaviors of turbulent fluids and living brains is discussed. Finally, by considering the scenario as a dynamic substrate underlying generic aspects of both the functioning and the genesis of complexity in a supposedly deterministic world, a theoretical framework covering the evolutionary development of structural transformations in the time evolution of that world is built up.
△ Less
Submitted 9 May, 2012; v1 submitted 11 November, 2009;
originally announced November 2009.