Showing 1–34 of 34 results for author: Rimoldi, M

Study of selected mild steels for application in vacuum systems of future gravitational wave detectors

Authors: Carlo Scarcia, Giuseppe Bregliozzi, Paolo Chiggiato, Alice Ingrid Michet, Ana Teresa Perez Fontenla, Martino Rimoldi, Mauro Taborelli, Ivo Wevers

Abstract: Next-generation gravitational wave detectors (GWDs) like the Cosmic Explorer and Einstein Telescope require extensive vacuum tubing, necessitating cost-effective materials. This study explores the viability of mild steel as an alternative to austenitic stainless steel for UHV beampipes, focusing on outgassing rates and surface chemistry after low-temperature bakeouts. Mild steels exhibit significa… ▽ More Next-generation gravitational wave detectors (GWDs) like the Cosmic Explorer and Einstein Telescope require extensive vacuum tubing, necessitating cost-effective materials. This study explores the viability of mild steel as an alternative to austenitic stainless steel for UHV beampipes, focusing on outgassing rates and surface chemistry after low-temperature bakeouts. Mild steels exhibit significantly lower hydrogen outgassing rates, below 10$^{-14}$ mbar l s$^{-1}$ cm$^{-2}$ after bakeouts at 80°C for 48 hours. While water vapor is the primary residual gas after such low-temperature bakeouts, repeated treatments reduce its outgassing rate and modify surface conditions so that such benefit is preserved after at least six months of exposure to laboratory air. These findings position mild steel as an economical and efficient material for future GWD beampipes. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Asymptotically non-negative Ricci curvature, elliptic Kato constant and isoperimetric inequalities

Authors: Debora Impera, Michele Rimoldi, Giona Veronelli

Abstract: The ABP method for proving isoperimetric inequalities has been first employed by Cabré in $\mathbb{R}^n$, then developed by Brendle, notably in the context of non-compact Riemannian manifolds of non-negative Ricci curvature and positive asymptotic volume ratio. In this paper, we expand upon their approach and prove isoperimetric inequalities (sharp in the limit) in the presence of a small amount o… ▽ More The ABP method for proving isoperimetric inequalities has been first employed by Cabré in $\mathbb{R}^n$, then developed by Brendle, notably in the context of non-compact Riemannian manifolds of non-negative Ricci curvature and positive asymptotic volume ratio. In this paper, we expand upon their approach and prove isoperimetric inequalities (sharp in the limit) in the presence of a small amount of negative curvature. First, we consider smallness of the negative part $\mathrm{Ric}_-$ of the Ricci curvature in terms of its elliptic Kato constant. Indeed, the Kato constant turns out to control the non-negativity of the ($\infty$-)Bakry-Émery Ricci-tensor of a suitable conformal deformation of the manifold, and the ABP method can be implemented in this setting. Secondly, we show that the smallness of the Kato constant is implied by a suitable polynomial decay of $\mathrm{Ric}_-$, provided that the asymptotic volume ratio is positive and either (a) $M$ has one end and asymptotically non-negative sectional curvature or (b) the relative volume comparison known as $\textbf{(VC)}$ condition holds. To show this latter fact, we enhance techniques elaborated by Li-Tam and Kasue to obtain new estimates of the Green function valid on the whole manifold. △ Less

Submitted 12 March, 2024; v1 submitted 26 February, 2024; originally announced February 2024.

Comments: 23 pages. With respect to the previous version, assumption added in Theorem 1.2 and Section 4 changed accordingly. Bibliography updated. All comments are welcome!

Poincaré inequality and topological rigidity of translators and self-expanders for the mean curvature flow

Authors: Debora Impera, Michele Rimoldi

Abstract: We prove an abstract structure theorem for weighted manifolds supporting a weighted $f$-Poincaré inequality and whose ends satisfy a suitable non-integrability condition. We then study how our arguments can be used to obtain full topological control on two important classes of hypersurfaces of the Euclidean space, namely translators and self-expanders for the mean curvature flow, under either stab… ▽ More We prove an abstract structure theorem for weighted manifolds supporting a weighted $f$-Poincaré inequality and whose ends satisfy a suitable non-integrability condition. We then study how our arguments can be used to obtain full topological control on two important classes of hypersurfaces of the Euclidean space, namely translators and self-expanders for the mean curvature flow, under either stability or curvature asumptions. As an important intermediate step in order to get our results we get the validity of a Poincaré inequality with respect to the natural weighted measure on any translator and we prove that any end of a translator must have infinite weighted volume. Similar tools can be obtained for properly immersed self-expanders permitting to get topological rigidity under curvature assumptions. △ Less

Submitted 25 October, 2023; v1 submitted 19 October, 2023; originally announced October 2023.

Comments: 15 pages. Minor changes in the exposition in v2. All comments are welcome!

Rigidity and non-existence results for collapsed translators

Authors: Debora Impera, Niels Martin Møller, Michele Rimoldi

Abstract: We prove a rigidity result for mean curvature self-translating solitons, characterizing the grim reaper cylinder as the only finite entropy self-translating 2-surface in $\mathbb{R}^3$ of width $π$ and bounded from below. The proof makes use of parabolicity in a weighted setting applied to a suitable universally $L$-superharmonic function defined on translaters in such slabs. We prove a rigidity result for mean curvature self-translating solitons, characterizing the grim reaper cylinder as the only finite entropy self-translating 2-surface in $\mathbb{R}^3$ of width $π$ and bounded from below. The proof makes use of parabolicity in a weighted setting applied to a suitable universally $L$-superharmonic function defined on translaters in such slabs. △ Less

Submitted 10 July, 2023; v1 submitted 24 April, 2023; originally announced April 2023.

Comments: Expanded introduction. New result added (Theorem 1.6). All comments are welcome!

Report number: DFF-7027-00110B; CF21-0680; CPH-GEOTOP-DNRF151 MSC Class: 53A10; 53E10 (49Q05; 53C42)

A facility for radiation hardness studies based on a medical cyclotron

Authors: John Anders, Saverio Braccini, Tommaso Stefano Carzaniga, Pierluigi Casolaro, Meghranjana Chatterjee, Gaia Dellepiane, Laura Franconi, Lea Halser, Armin Ilg, Isidre Mateu, Federico Meloni, Claudia Merlassino, Antonio Miucci, Roman Müller, Marco Rimoldi, Michele Weber

Abstract: The development of instrumentation for operation in high-radiation environments represents a challenge in various research fields, particularly in particle physics experiments and space missions, and drives an ever-increasing demand for irradiation facilities dedicated to radiation hardness studies. Depending on the application, different needs arise in terms of particle type, energy and dose rate… ▽ More The development of instrumentation for operation in high-radiation environments represents a challenge in various research fields, particularly in particle physics experiments and space missions, and drives an ever-increasing demand for irradiation facilities dedicated to radiation hardness studies. Depending on the application, different needs arise in terms of particle type, energy and dose rate. In this article, we present a versatile installation based on a medical cyclotron located at the Bern University Hospital (Inselspital), which is used as a controlled 18-MeV proton source. This accelerator is used for daily production of medical radioisotopes, as well as for multidisciplinary research, thanks to a 6.5-meter long beam transfer line that terminates in an independent bunker, dedicated only to scientific activities. The facility offers a wide range of proton fluxes, due to an adjustable beam current from approximately 10 pA to the micro-ampere range, together with a series of steering and focusing magnets along the beamline that allow for the beam spot to be focused down to a few mm^2. The beamline can be instrumented with a variety of beam monitoring detectors, collimators, and beam current measurement devices to precisely control the irradiation conditions. The facility also hosts a well equipped laboratory dedicated to the characterisation of samples after irradiation. An experimental validation of the irradiation setup, with proton fluxes ranging from $5\times10^9$ cm$^{-2}$s$^{-1}$ to $4\times10^{11}$ cm$^{-2}$s$^{-1}$, is reported in this article. △ Less

Submitted 22 March, 2022; v1 submitted 11 January, 2022; originally announced January 2022.

Large spin-to-charge conversion at room temperature in extended epitaxial Sb2Te3 topological insulator chemically grown on Silicon

Authors: Emanuele Longo, Matteo Belli, Mario Alia, Martino Rimoldi, Raimondo Cecchini, Massimo Longo, Claudia Wiemer, Lorenzo Locatelli, Gianluca Gubbiotti, Marco Fanciulli, Roberto Mantovan

Abstract: Spin-charge interconversion phenomena at the interface between magnetic materials and topological insulators (TIs) are attracting enormous interest in the research effort towards the development of fast and ultra-low power devices for the future information and communication technology. We report a large spin-to-charge conversion efficiency in Au/Co/Au/Sb2Te3/Si(111) heterostructures based on Sb2T… ▽ More Spin-charge interconversion phenomena at the interface between magnetic materials and topological insulators (TIs) are attracting enormous interest in the research effort towards the development of fast and ultra-low power devices for the future information and communication technology. We report a large spin-to-charge conversion efficiency in Au/Co/Au/Sb2Te3/Si(111) heterostructures based on Sb2Te3 TIs grown by metal organic chemical vapor deposition on 4 inches Si(111) substrates. By conducting room temperature spin pum** ferromagnetic resonance, we measure an inverse Edelstein Effect length λIEE up to 0.75 nm, a record value for 3-dimensional chalcogenide-based TIs heterostructures. Our results open the path toward the use of chemical methods to produce TIs on large area Si substrates and characterized by highly performing spin-charge conversion, thus marking a milestone toward future technology-transfer. △ Less

Submitted 16 April, 2021; originally announced April 2021.

Comments: Main text: 28 pages, 5 figures and 2 tables. Supplementary information are also included in the file with additional 12 pages

Density and non-density of $C^\infty_c \hookrightarrow W^{k,p}$ on complete manifolds with curvature bounds

Authors: Shouhei Honda, Luciano Mari, Michele Rimoldi, Giona Veronelli

Abstract: We investigate the density of compactly supported smooth functions in the Sobolev space $W^{k,p}$ on complete Riemannian manifolds. In the first part of the paper, we extend to the full range $p\in [1,2]$ the most general results known in the Hilbertian case. In particular, we obtain the density under a quadratic Ricci lower bound (when $k=2$) or a suitably controlled growth of the derivatives of… ▽ More We investigate the density of compactly supported smooth functions in the Sobolev space $W^{k,p}$ on complete Riemannian manifolds. In the first part of the paper, we extend to the full range $p\in [1,2]$ the most general results known in the Hilbertian case. In particular, we obtain the density under a quadratic Ricci lower bound (when $k=2$) or a suitably controlled growth of the derivatives of the Riemann curvature tensor only up to order $k-3$ (when $k>2$). To this end, we prove a gradient regularity lemma that might be of independent interest. In the second part of the paper, for every $n \ge 2$ and $p>2$ we construct a complete $n$-dimensional manifold with sectional curvature bounded from below by a negative constant, for which the density property in $W^{k,p}$ does not hold for any $k \ge 2$. We also deduce the existence of a counterexample to the validity of the Calderón-Zygmund inequality for $p>2$ when $\mathrm{Sec} \ge 0$, and in the compact setting we show the impossibility to build a Calderón-Zygmund theory for $p>2$ with constants only depending on a bound on the diameter and a lower bound on the sectional curvature. △ Less

Submitted 16 May, 2021; v1 submitted 30 November, 2020; originally announced November 2020.

Comments: 24 pages. Final version: to appear on Nonlinear Analysis. Comments are welcome

Higher order distance-like functions and Sobolev spaces

Authors: Debora Impera, Michele Rimoldi, Giona Veronelli

Abstract: We consider complete Riemannian manifolds with a controlled growth of the covariant derivatives of Ricci curvatures up to order $k-2$ and a controlled decay of the injectivity radii. On such manifolds we construct distance-like functions with a control on covariant derivatives up to order $k$. Alternatively, the assumption on the injectivity radii can be replaced with the request of a controlled g… ▽ More We consider complete Riemannian manifolds with a controlled growth of the covariant derivatives of Ricci curvatures up to order $k-2$ and a controlled decay of the injectivity radii. On such manifolds we construct distance-like functions with a control on covariant derivatives up to order $k$. Alternatively, the assumption on the injectivity radii can be replaced with the request of a controlled growth of the full curvature tensor at order $0$. The control in the assumptions occur via non-necessarily polynomial growth functions. This construction largely extend previously known results in various directions, permitting to obtain consequences which are (in a sense) sharp. A first main application is to the study of the density property for Sobolev spaces on Riemannian manifolds, namely the problem of guaranteeing the density of smooth compactly supported function in the Sobolev space $W^{k,p}$. Contrary to all previously known results this can be obtained also on manifolds with possibly unbounded geometry. In the particular case $p=2$, making use of the Weitzenböck formula for a Lichnerowicz Laplacian acting on the space of smooth section of the bundle of $k$-covariant symmetric tensors, we can weaken the assumptions needed to obtain the density property. Namely we prove that the control on the highest order derivative of curvature is not needed in this situation. Beyond the density property we finally highlight some new applications of our results to disturbed Sobolev inequalities, disturbed $L^{p}$-Calderón-Zygmund inequalities and the full Omori-Yau maximum principle for the Hessian. △ Less

Submitted 30 November, 2020; v1 submitted 28 August, 2019; originally announced August 2019.

Comments: 42 pages. Corrected typos. Comments are welcome

Beyond the Standard Model Physics at the HL-LHC and HE-LHC

Authors: X. Cid Vidal, M. D'Onofrio, P. J. Fox, R. Torre, K. A. Ulmer, A. Aboubrahim, A. Albert, J. Alimena, B. C. Allanach, C. Alpigiani, M. Altakach, S. Amoroso, J. K. Anders, J. Y. Araz, A. Arbey, P. Azzi, I. Babounikau, H. Baer, M. J. Baker, D. Barducci, V. Barger, O. Baron, L. Barranco Navarro, M. Battaglia, A. Bay , et al. (272 additional authors not shown)

Abstract: This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible futu… ▽ More This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible future upgrade, the High Energy (HE) LHC, defined as $15~\mathrm{ab}^{-1}$ of data at a centre-of-mass energy of $27~\mathrm{TeV}$. We consider a large variety of new physics models, both in a simplified model fashion and in a more model-dependent one. A long list of contributions from the theory and experimental (ATLAS, CMS, LHCb) communities have been collected and merged together to give a complete, wide, and consistent view of future prospects for BSM physics at the considered colliders. On top of the usual standard candles, such as supersymmetric simplified models and resonances, considered for the evaluation of future collider potentials, this report contains results on dark matter and dark sectors, long lived particles, leptoquarks, sterile neutrinos, axion-like particles, heavy scalars, vector-like quarks, and more. Particular attention is placed, especially in the study of the HL-LHC prospects, to the detector upgrades, the assessment of the future systematic uncertainties, and new experimental techniques. The general conclusion is that the HL-LHC, on top of allowing to extend the present LHC mass and coupling reach by $20-50\%$ on most new physics scenarios, will also be able to constrain, and potentially discover, new physics that is presently unconstrained. Moreover, compared to the HL-LHC, the reach in most observables will generally more than double at the HE-LHC, which may represent a good candidate future facility for a final test of TeV-scale new physics. △ Less

Submitted 13 August, 2019; v1 submitted 19 December, 2018; originally announced December 2018.

Comments: Report from Working Group 3 on the Physics of the HL-LHC, and Perspectives at the HE-LHC; v2: final version updated with the latest contributions and summaries; 239 pages + refs; v3: typos and character misprint in Fig. 7.2 fixed; v4: added one missing author

Report number: CERN-LPCC-2018-05

Index and first Betti number of f-minimal hypersurfaces: general ambients

Authors: Debora Impera, Michele Rimoldi

Abstract: We generalize a method by L. Ambrozio, A. Carlotto, and B. Sharp to study the Morse index of closed f-minimal hypersurfaces isometrically immersed in a general weighted manifold. The technique permits, in particular, to obtain a linear lower bound on the Morse index via the first Betti number for closed f-minimal hypersurfaces in products of some compact rank one symmetric spaces with an Euclidean… ▽ More We generalize a method by L. Ambrozio, A. Carlotto, and B. Sharp to study the Morse index of closed f-minimal hypersurfaces isometrically immersed in a general weighted manifold. The technique permits, in particular, to obtain a linear lower bound on the Morse index via the first Betti number for closed f-minimal hypersurfaces in products of some compact rank one symmetric spaces with an Euclidean factor, endowed with the rigid shrinking gradient Ricci soliton structure. These include, as particular cases, all cylindric shrinking gradient Ricci solitons. △ Less

Submitted 9 November, 2018; originally announced November 2018.

Comments: 13 pages

Density problems for second order Sobolev spaces and cut-off functions on manifolds with unbounded geometry

Authors: Debora Impera, Michele Rimoldi, Giona Veronelli

Abstract: We consider complete non-compact manifolds with either a sub-quadratic growth of the norm of the Riemann curvature, or a sub-quadratic growth of both the norm of the Ricci curvature and the squared inverse of the injectivity radius. We show the existence on such a manifold of a distance-like function with bounded gradient and mild growth of the Hessian. As a main application, we prove that smooth… ▽ More We consider complete non-compact manifolds with either a sub-quadratic growth of the norm of the Riemann curvature, or a sub-quadratic growth of both the norm of the Ricci curvature and the squared inverse of the injectivity radius. We show the existence on such a manifold of a distance-like function with bounded gradient and mild growth of the Hessian. As a main application, we prove that smooth compactly supported functions are dense in $W^{2,p}$. The result is improved for $p=2$ avoiding both the upper bound on the Ricci tensor, and the injectivity radius assumption. As further applications we prove new disturbed Sobolev and Calderón-Zygmund inequalities on manifolds with possibly unbounded curvature and highlight consequences about the validity of the full Omori-Yau maximum principle for the Hessian. △ Less

Submitted 4 March, 2019; v1 submitted 5 October, 2018; originally announced October 2018.

Comments: Improved version. As a main modification, we added a final Section 8 including some additional geometric applications of our result. Furthermore, we proved in Section 7 a disturbed L^p-Sobolev-type inequality with weight more general than the previous one. 25 pages. Comments are welcome

Charge collection characterisation with the Transient Current Technique of the ams H35DEMO CMOS detector after proton irradiation

Authors: John Anders, Mathieu Benoit, Saverio Braccini, Raimon Casanova, Hucheng Chen, Kai Chen, Francesco Armando di Bello, Armin Fehr, Didier Ferrere, Dean Forshaw, Tobias Golling, Sergio Gonzalez-Sevilla, Giuseppe Iacobucci, Moritz Kiehn, Francesco Lanni, Hongbin Liu, Lingxin Meng, Claudia Merlassino, Antonio Miucci, Marzio Nessi, Ivan Perić, Marco Rimoldi, D M S Sultan, Mateus Vincente Barreto Pinto, Eva Vilella , et al. (4 additional authors not shown)

Abstract: This paper reports on the characterisation with Transient Current Technique measurements of the charge collection and depletion depth of a radiation-hard high-voltage CMOS pixel sensor produced at ams AG. Several substrate resistivities were tested before and after proton irradiation with two different sources: the 24 GeV Proton Synchrotron at CERN and the 16.7 MeV Cyclotron at Bern Inselspital. This paper reports on the characterisation with Transient Current Technique measurements of the charge collection and depletion depth of a radiation-hard high-voltage CMOS pixel sensor produced at ams AG. Several substrate resistivities were tested before and after proton irradiation with two different sources: the 24 GeV Proton Synchrotron at CERN and the 16.7 MeV Cyclotron at Bern Inselspital. △ Less

Submitted 25 July, 2018; originally announced July 2018.

Comments: 14 pages, 11 figures

Quantitative index bounds for translators via topology

Authors: Debora Impera, Michele Rimoldi

Abstract: We obtain a quantitative estimate on the generalised index of translators for the mean curvature flow with bounded norm of the second fundamental form. The estimate involves the dimension of the space of weighted square integrable f-harmonic 1-forms. By the adaptation to the weighted setting of Li-Tam theory developed in previous works, this yields estimates in terms of the number of ends of the h… ▽ More We obtain a quantitative estimate on the generalised index of translators for the mean curvature flow with bounded norm of the second fundamental form. The estimate involves the dimension of the space of weighted square integrable f-harmonic 1-forms. By the adaptation to the weighted setting of Li-Tam theory developed in previous works, this yields estimates in terms of the number of ends of the hypersurface when this is contained in a upper halfspace with respect to the translating direction. When there exists a point where all principal curvatures are distinct we estimate the nullity of the stability operator. This permits to obtain quantitative estimates on the stability index via the topology of translators with bounded norm of the second fundamental form which are either two-dimensional or (in higher dimension) have finite topological type and are contained in a upper halfspace. △ Less

Submitted 13 January, 2019; v1 submitted 20 April, 2018; originally announced April 2018.

Comments: 14 pages. Translators seem to support a weighted L^2 Sobolev inequality only in dimension greater than or equal to 3 and when the translator is contained in a upper halfspace with respect to the translating direction; see Appendix A. Statements of Theorem A, Theorem B, Corollary C and Theorem E fixed accordingly. Theorem D still holds unchanged. Final version: to appear on Math. Z

Index and first Betti number of $f$-minimal hypersurfaces and self-shrinkers

Authors: Debora Impera, Michele Rimoldi, Alessandro Savo

Abstract: We study the Morse index of self-shrinkers for the mean curvature flow and, more generally, of $f$-minimal hypersurfaces in a weighted Euclidean space endowed with a convex weight. When the hypersurface is compact, we show that the index is bounded from below by an affine function of its first Betti number. When the first Betti number is large, this improves index estimates known in literature. In… ▽ More We study the Morse index of self-shrinkers for the mean curvature flow and, more generally, of $f$-minimal hypersurfaces in a weighted Euclidean space endowed with a convex weight. When the hypersurface is compact, we show that the index is bounded from below by an affine function of its first Betti number. When the first Betti number is large, this improves index estimates known in literature. In the complete non-compact case, the lower bound is in terms of the dimension of the space of weighted square summable $f$-harmonic $1$-forms; in particular, in dimension $2$, the procedure gives an index estimate in terms of the genus of the surface. △ Less

Submitted 22 March, 2018; originally announced March 2018.

Comments: 20 pages

The Frankel property for self-shrinkers from the viewpoint of elliptic PDE's

Authors: Debora Impera, Stefano Pigola, Michele Rimoldi

Abstract: We show that two properly embedded self-shrinkers in Euclidean space that are sufficiently separated at infinity must intersect at a finite point. The proof is based on a localized version of the Reilly formula applied to a suitable f-harmonic function with controlled gradient. In the immersed case, a new direct proof of the generalized half-space property is also presented. We show that two properly embedded self-shrinkers in Euclidean space that are sufficiently separated at infinity must intersect at a finite point. The proof is based on a localized version of the Reilly formula applied to a suitable f-harmonic function with controlled gradient. In the immersed case, a new direct proof of the generalized half-space property is also presented. △ Less

Submitted 28 July, 2020; v1 submitted 6 March, 2018; originally announced March 2018.

Comments: 20 pages. Final version. To appear in J. Reine Angew. Math

A facility for radiation hardness studies based on the Bern medical cyclotron

Authors: John Anders, Saverio Braccini, Tommaso Carzaniga, Antonio Ereditato, Armin Fehr, Federico Meloni, Claudia Merlassino, Antonio Miucci, Marco Rimoldi, Michele Weber

Abstract: The development of instrumentation to be operated in high-radiation environments is one of the main challenges in fundamental research. Besides space and nuclear applications, particle physics experiments also need radiation-hard devices. The focus of this paper is a new irradiation facility based on the medical cyclotron located at the Bern University Hospital (Insespital), which is used as a con… ▽ More The development of instrumentation to be operated in high-radiation environments is one of the main challenges in fundamental research. Besides space and nuclear applications, particle physics experiments also need radiation-hard devices. The focus of this paper is a new irradiation facility based on the medical cyclotron located at the Bern University Hospital (Insespital), which is used as a controlled 18 MeV proton source. The adjustable beam current allows for dose rate dependent characterisation over a large dynamic range, from 0.1 to 1000 Grad per hour. The beam can be tuned so that the user can obtain the desired irradiation conditions. A complete study of the device under irradiation is possible thanks to dedicated beam monitoring systems as well as a power control system for the device under irradiation, which can be operated on-line. Further characterisations of the irradiated devices are possible thanks to a laboratory equipped with gamma spectroscopy detectors, ammeters and transient current technique setups. △ Less

Submitted 5 March, 2018; originally announced March 2018.

Test beam measurement of ams H35 HV-CMOS capacitively coupled pixel sensor prototypes with high-resistivity substrate

Authors: M. Benoit, S. Braccini, R. Casanova, E. Cavallaro, H. Chen, K. Chen, F. A. Di Bello, D. Ferrere, D. Frizzell, T. Golling, S. Gonzalez-Sevilla, S. Grinstein, G. Iacobucci, M. Kiehn, F. Lanni, H. Liu, J. Metcalfe, L. Meng, C. Merlassino, A. Miucci, D. Muenstermann, M. Nessi, H. Okawa, I. Perić, M. Rimoldi , et al. (12 additional authors not shown)

Abstract: In the context of the studies of the ATLAS High Luminosity LHC programme, radiation tolerant pixel detectors in CMOS technologies are investigated. To evaluate the effects of substrate resistivity on CMOS sensor performance, the H35DEMO demonstrator, containing different diode and amplifier designs, was produced in ams H35 HV-CMOS technology using four different substrate resistivities spanning fr… ▽ More In the context of the studies of the ATLAS High Luminosity LHC programme, radiation tolerant pixel detectors in CMOS technologies are investigated. To evaluate the effects of substrate resistivity on CMOS sensor performance, the H35DEMO demonstrator, containing different diode and amplifier designs, was produced in ams H35 HV-CMOS technology using four different substrate resistivities spanning from $\mathrm{80}$ to $\mathrm{1000~Ω\cdot cm}$. A glueing process using a high-precision flip-chip machine was developed in order to capacitively couple the sensors to FE-I4 Readout ASIC using a thin layer of epoxy glue with good uniformity over a large surface. The resulting assemblies were measured in beam test at the Fermilab Test Beam Facilities with 120 GeV protons and CERN SPS H8 beamline using 80 GeV pions. The in-time efficiency and tracking properties measured for the different sensor types are shown to be compatible with the ATLAS ITk requirements for its pixel sensors. △ Less

Submitted 3 December, 2018; v1 submitted 22 December, 2017; originally announced December 2017.

Testbeam results of irradiated ams H18 HV-CMOS pixel sensor prototypes

Authors: M. Benoit, S. Braccini, G. Casse, H. Chen, K. Chen, F. A. Di Bello, D. Ferrere, T. Golling, S. Gonzalez-Sevilla, G. Iacobucci, M. Kiehn, F. Lanni, H. Liu, L. Meng, C. Merlassino, A. Miucci, D. Muenstermann, M. Nessi, H. Okawa, I. Peric, M. Rimoldi, B. Ristic, M. Vicente Barrero Pinto, J. Vossebeld, M. Weber , et al. (4 additional authors not shown)

Abstract: HV-CMOS pixel sensors are a promising option for the tracker upgrade of the ATLAS experiment at the LHC, as well as for other future tracking applications in which large areas are to be instrumented with radiation-tolerant silicon pixel sensors. We present results of testbeam characterisations of the $4^{\mathrm{th}}$ generation of Capacitively Coupled Pixel Detectors (CCPDv4) produced with the am… ▽ More HV-CMOS pixel sensors are a promising option for the tracker upgrade of the ATLAS experiment at the LHC, as well as for other future tracking applications in which large areas are to be instrumented with radiation-tolerant silicon pixel sensors. We present results of testbeam characterisations of the $4^{\mathrm{th}}$ generation of Capacitively Coupled Pixel Detectors (CCPDv4) produced with the ams H18 HV-CMOS process that have been irradiated with different particles (reactor neutrons and 18 MeV protons) to fluences between $1\cdot 10^{14}$ and $5\cdot 10^{15}$ 1-MeV-n$_\textrm{eq}$/cm$^2$. The sensors were glued to ATLAS FE-I4 pixel readout chips and measured at the CERN SPS H8 beamline using the FE-I4 beam telescope. Results for all fluences are very encouraging with all hit efficiencies being better than 97% for bias voltages of $85\,$V. The sample irradiated to a fluence of $1\cdot 10^{15}$ n$_\textrm{eq}$/cm$^2$ - a relevant value for a large volume of the upgraded tracker - exhibited 99.7% average hit efficiency. The results give strong evidence for the radiation tolerance of HV-CMOS sensors and their suitability as sensors for the experimental HL-LHC upgrades and future large-area silicon-based tracking detectors in high-radiation environments. △ Less

Submitted 28 November, 2017; v1 submitted 8 November, 2016; originally announced November 2016.

Comments: 14 pages, 11 figures; revised version

Journal ref: JINST 13 (2018) P02011

Extremals of Log Sobolev inequality on non-compact manifolds and Ricci soliton structures

Authors: Michele Rimoldi, Giona Veronelli

Abstract: In this paper we establish the existence of extremals for the Log Sobolev functional on complete non-compact manifolds with Ricci curvature bounded from below and strictly positive injectivity radius, under a condition near infinity. When Ricci curvature is also bounded from above we get exponential decay at infinity of the extremals. As a consequence of these analytical results we establish, unde… ▽ More In this paper we establish the existence of extremals for the Log Sobolev functional on complete non-compact manifolds with Ricci curvature bounded from below and strictly positive injectivity radius, under a condition near infinity. When Ricci curvature is also bounded from above we get exponential decay at infinity of the extremals. As a consequence of these analytical results we establish, under the same assumptions, that non-trivial shrinking Ricci solitons support a gradient Ricci soliton structure. On the way, we prove two results of independent interest: the existence of a distance-like function with uniformly controlled gradient and Hessian on complete non-compact manifolds with bounded Ricci curvature and strictly positive injectivity radius and a general growth estimate for the norm of the soliton vector field on manifolds with bounded Ricci curvature. △ Less

Submitted 27 February, 2019; v1 submitted 30 May, 2016; originally announced May 2016.

Comments: 22 pages; Final version: to appear on Calc. Var. Partial Differential Equations

MSC Class: 53C21; 53C44; 35J20

Journal ref: Calc. Var. Partial Differential Equations 58 (2019), no. 2, 58:66

Results of the 2015 testbeam of a 180 nm AMS High-Voltage CMOS sensor prototype

Authors: M. Benoit, J. Bilbao de Mendizabal, G. Casse, H. Chen, K. Chen, F. A. Di Bello, D. Ferrere, T. Golling, S. Gonzalez-Sevilla, G. Iacobucci, F. Lanni, H. Liu, F. Meloni, L. Meng, A. Miucci, D. Muenstermann, M. Nessi, I. Peric, M. Rimoldi, B. Ristic, M. Vicente Barrero Pinto, J. Vossebeld, M. Weber, W. Wu, L. Xu

Abstract: Active pixel sensors based on the High-Voltage CMOS technology are being investigated as a viable option for the future pixel tracker of the ATLAS experiment at the High-Luminosity LHC. This paper reports on the testbeam measurements performed at the H8 beamline of the CERN Super Proton Synchrotron on a High-Voltage CMOS sensor prototype produced in 180 nm AMS technology. Results in terms of track… ▽ More Active pixel sensors based on the High-Voltage CMOS technology are being investigated as a viable option for the future pixel tracker of the ATLAS experiment at the High-Luminosity LHC. This paper reports on the testbeam measurements performed at the H8 beamline of the CERN Super Proton Synchrotron on a High-Voltage CMOS sensor prototype produced in 180 nm AMS technology. Results in terms of tracking efficiency and timing performance, for different threshold and bias conditions, are shown. △ Less

Submitted 30 June, 2016; v1 submitted 24 March, 2016; originally announced March 2016.

Comments: 16 pages, 14 figures

Rigidity results and topology at infinity of translating solitons of the mean curvature flow

Authors: Debora Impera, Michele Rimoldi

Abstract: In this paper we obtain rigidity results and obstructions on the topology at infinity of translating solitons of the mean curvature flow in the Euclidean space. Our approach relies on the theory of f-minimal hypersurfaces. In this paper we obtain rigidity results and obstructions on the topology at infinity of translating solitons of the mean curvature flow in the Euclidean space. Our approach relies on the theory of f-minimal hypersurfaces. △ Less

Submitted 29 August, 2016; v1 submitted 5 October, 2014; originally announced October 2014.

Comments: 18 pages. Minor corrections. Final version: to appear on Commun. Contemp. Math

Journal ref: Commun. Contemp. Math. 19 (2017), no. 6, 1750002, 21 pp

Stability properties and topology at infinity of f-minimal hypersurfaces

Authors: Debora Impera, Michele Rimoldi

Abstract: We study stability properties of $f$-minimal hypersurfaces isometrically immersed in weighted manifolds with non-negative Bakry-Emery Ricci curvature under volume growth conditions. Moreover, exploiting a weighted version of a finiteness result and the adaptation to this setting of Li-Tam theory, we investigate the topology at infinity of $f$-minimal hypersurfaces. On the way, we prove a new compa… ▽ More We study stability properties of $f$-minimal hypersurfaces isometrically immersed in weighted manifolds with non-negative Bakry-Emery Ricci curvature under volume growth conditions. Moreover, exploiting a weighted version of a finiteness result and the adaptation to this setting of Li-Tam theory, we investigate the topology at infinity of $f$-minimal hypersurfaces. On the way, we prove a new comparison result in weighted geometry and we provide a general weighted $L^1$-Sobolev inequality for hypersurfaces in Cartan-Hadamard weighted manifolds, satisfying suitable restrictions on the weight function. △ Less

Submitted 11 July, 2014; v1 submitted 25 February, 2013; originally announced February 2013.

Comments: 30 pages. Final version: to appear on Geom. Dedicata

MSC Class: 53C42; 53C21

Journal ref: Geom. Dedicata 178 (2015) 21-47

Complete self-shrinkers confined into some regions of the space

Authors: Stefano Pigola, Michele Rimoldi

Abstract: We study geometric properties of complete non-compact bounded self-shrinkers and obtain natural restrictions that force these hypersurfaces to be compact. Furthermore, we observe that, to a certain extent, complete self-shrinkers intersect transversally a hyperplane through the origin. When such an intersection is compact, we deduce spectral information on the natural drifted Laplacian associated… ▽ More We study geometric properties of complete non-compact bounded self-shrinkers and obtain natural restrictions that force these hypersurfaces to be compact. Furthermore, we observe that, to a certain extent, complete self-shrinkers intersect transversally a hyperplane through the origin. When such an intersection is compact, we deduce spectral information on the natural drifted Laplacian associated to the self-shrinker. These results go in the direction of verifying the validity of a conjecture by H. D. Cao concerning the polynomial volume growth of complete self-shrinkers. A finite strong maximum principle in case the self-shrinker is confined into a cylindrical product is also presented. △ Less

Submitted 17 December, 2012; originally announced December 2012.

Comments: 21 pages

Journal ref: Ann. Global Anal. Geom. 45 (2014), no. 1, 47-65

On a classification theorem for self-shrinkers

Authors: Michele Rimoldi

Abstract: We generalize a classification result for self-shrinkers of the mean curvature flow with nonnegative mean curvature, which was obtained by T. Colding and W. Minicozzi, replacing the assumption on polynomial volume growth with a weighted $L^2$ condition on the norm of the second fundamental form. Our approach adopt the viewpoint of weighted manifolds and permits also to recover and to extend some o… ▽ More We generalize a classification result for self-shrinkers of the mean curvature flow with nonnegative mean curvature, which was obtained by T. Colding and W. Minicozzi, replacing the assumption on polynomial volume growth with a weighted $L^2$ condition on the norm of the second fundamental form. Our approach adopt the viewpoint of weighted manifolds and permits also to recover and to extend some others recent classification and gap results for self-shrinkers. △ Less

Submitted 17 December, 2012; originally announced December 2012.

Comments: 9 pages. To appear on Proc. Amer. Math. Soc

Journal ref: Proc. Amer. Math. Soc. 142 (2014), no. 10, 3605-3613

The Cotton tensor and the Ricci flow

Authors: Carlo Mantegazza, Samuele Mongodi, Michele Rimoldi

Abstract: We compute the evolution equation of the Cotton and the Bach tensor under the Ricci flow of a Riemannian manifold, with particular attention to the three dimensional case, and we discuss some applications. We compute the evolution equation of the Cotton and the Bach tensor under the Ricci flow of a Riemannian manifold, with particular attention to the three dimensional case, and we discuss some applications. △ Less

Submitted 4 March, 2014; v1 submitted 20 March, 2012; originally announced March 2012.

Comments: 28 pages

Journal ref: Geom. Flows 2 (2017) 49-71

Topology of steady and expanding gradient Ricci solitons via f-harmonic maps

Authors: Michele Rimoldi, Giona Veronelli

Abstract: In this paper we give some results on the topology of manifolds with $\infty$-Bakry-Émery Ricci tensor bounded below, and in particular of steady and expanding gradient Ricci solitons. To this aim we clarify and further develop the theory of f-harmonic maps from non-compact manifolds into non-positively curved manifolds. Notably, we prove existence and vanishing results which generalize to the wei… ▽ More In this paper we give some results on the topology of manifolds with $\infty$-Bakry-Émery Ricci tensor bounded below, and in particular of steady and expanding gradient Ricci solitons. To this aim we clarify and further develop the theory of f-harmonic maps from non-compact manifolds into non-positively curved manifolds. Notably, we prove existence and vanishing results which generalize to the weighted setting part of Schoen and Yau's theory of harmonic maps. △ Less

Submitted 6 June, 2013; v1 submitted 15 December, 2011; originally announced December 2011.

Comments: 20 pages. The title has changed in this final version. To appear in Differential Geometry and its Applications

MSC Class: 53C43; 53C21

Journal ref: Differential Geom. Appl. 31 (2013), no. 5, 623-638

Some geometric analysis on generic Ricci solitons

Authors: Paolo Mastrolia, Marco Rigoli, Michele Rimoldi

Abstract: We study the geometry of complete generic Ricci solitons with the aid of some geometric-analytical tools extending techniques of the usual Riemannian setting. We study the geometry of complete generic Ricci solitons with the aid of some geometric-analytical tools extending techniques of the usual Riemannian setting. △ Less

Submitted 3 August, 2012; v1 submitted 14 July, 2011; originally announced July 2011.

Comments: 21 pages. Final version: to appear on Commun. Contemp. Math

MSC Class: 53C21

Journal ref: Commun. Contemp. Math. 15 (2013), no. 3, 1250058, 25 pp

Some triviality results for quasi-Einstein manifolds and Einstein warped products

Authors: Paolo Mastrolia, Michele Rimoldi

Abstract: In this paper we prove a number of triviality results for Einstein warped products and quasi-Einstein manifolds using different techniques and under assumptions of various nature. In particular we obtain and exploit gradient estimates for solutions of weighted Poisson-type equations and adaptations to the weighted setting of some Liouville-type theorems. In this paper we prove a number of triviality results for Einstein warped products and quasi-Einstein manifolds using different techniques and under assumptions of various nature. In particular we obtain and exploit gradient estimates for solutions of weighted Poisson-type equations and adaptations to the weighted setting of some Liouville-type theorems. △ Less

Submitted 10 February, 2011; v1 submitted 3 November, 2010; originally announced November 2010.

Comments: 15 pages, fixed minor mistakes in Section 3

MSC Class: 53C21

Journal ref: Geom. Dedicata 169 (2014) 225-237

Locally conformally flat quasi-Einstein manifolds

Authors: Giovanni Catino, Carlo Mantegazza, Lorenzo Mazzieri, Michele Rimoldi

Abstract: In this paper we prove that any complete locally conformally flat quasi-Einstein manifold of dimension $n\geq 3$ is locally a warped product with $(n-1)$-dimensional fibers of constant curvature. This result includes also the case of locally conformally flat gradient Ricci solitons. In this paper we prove that any complete locally conformally flat quasi-Einstein manifold of dimension $n\geq 3$ is locally a warped product with $(n-1)$-dimensional fibers of constant curvature. This result includes also the case of locally conformally flat gradient Ricci solitons. △ Less

Submitted 4 February, 2011; v1 submitted 7 October, 2010; originally announced October 2010.

Comments: Minor corrections

Journal ref: J. Reine Angew. Math., 2013 (2013), no. 675, 181-189

A remark on Einstein warped products

Authors: Michele Rimoldi

Abstract: We prove triviality results for Einstein warped products with non-compact bases. These extend previous work by D.-S. Kim and Y.-H. Kim. The proof, from the viewpoint of "quasi-Einstein manifolds" introduced by J. Case, Y.-S. Shu and G. Wei, rely on maximum principles at infinity and Liouville-type theorems. We prove triviality results for Einstein warped products with non-compact bases. These extend previous work by D.-S. Kim and Y.-H. Kim. The proof, from the viewpoint of "quasi-Einstein manifolds" introduced by J. Case, Y.-S. Shu and G. Wei, rely on maximum principles at infinity and Liouville-type theorems. △ Less

Submitted 24 November, 2010; v1 submitted 22 April, 2010; originally announced April 2010.

Comments: 12 pages. Corrected typos. Final version: to appear on Pacific J. Math

MSC Class: 53C21

Journal ref: Pacific J. Math. 252 (2011), no. 1, 207-218

Ricci almost solitons

Authors: Stefano Pigola, Marco Rigoli, Michele Rimoldi, Alberto G. Setti

Abstract: We introduce a natural extension of the concept of gradient Ricci soliton: the Ricci almost soliton. We provide existence and rigidity results, we deduce a-priori curvature estimates and isolation phenomena, and we investigate some topological properties. A number of differential identities involving the relevant geometric quantities are derived. Some basic tools from the weighted manifold theory… ▽ More We introduce a natural extension of the concept of gradient Ricci soliton: the Ricci almost soliton. We provide existence and rigidity results, we deduce a-priori curvature estimates and isolation phenomena, and we investigate some topological properties. A number of differential identities involving the relevant geometric quantities are derived. Some basic tools from the weighted manifold theory such as general weighted volume comparisons and maximum principles at infinity for diffusion operators are discussed. △ Less

Submitted 15 March, 2010; originally announced March 2010.

MSC Class: 53C21

Journal ref: Ann. Sc. Norm. Super. Pisa Cl. Sci. (5) 10 (2011), no. 4, 757-799

Myers' type theorems and some related oscillation results

Authors: Paolo Mastrolia, Michele Rimoldi, Giona Veronelli

Abstract: In this paper we study the behavior of solutions of a second order differential equation. The existence of a zero and its localization allow us to get some compactness results. In particular we obtain a Myers' type theorem even in the presence of an amount of negative curvature. The technique we use also applies to the study of spectral properties of Schroedinger operators on complete manifolds. In this paper we study the behavior of solutions of a second order differential equation. The existence of a zero and its localization allow us to get some compactness results. In particular we obtain a Myers' type theorem even in the presence of an amount of negative curvature. The technique we use also applies to the study of spectral properties of Schroedinger operators on complete manifolds. △ Less

Submitted 10 February, 2010; originally announced February 2010.

Comments: 16 pages

MSC Class: 53C20; 34C10

Journal ref: Journal of Geometric Analysis, 22 no. 3 (2012) 763-779

Remarks on non-compact gradient Ricci solitons

Authors: Stefano Pigola, Michele Rimoldi, Alberto G. Setti

Abstract: In this paper we show how techniques coming from stochastic analysis, such as stochastic completeness (in the form of the weak maximum principle at infinity), parabolicity and $L^p$-Liouville type results for the weighted Laplacian associated to the potential may be used to obtain triviality, rigidity results, and scalar curvature estimates for gradient Ricci solitons under $L^p$ conditions on t… ▽ More In this paper we show how techniques coming from stochastic analysis, such as stochastic completeness (in the form of the weak maximum principle at infinity), parabolicity and $L^p$-Liouville type results for the weighted Laplacian associated to the potential may be used to obtain triviality, rigidity results, and scalar curvature estimates for gradient Ricci solitons under $L^p$ conditions on the relevant quantities. △ Less

Submitted 23 October, 2009; v1 submitted 18 May, 2009; originally announced May 2009.

Comments: The main changes over the previous version are that Theorem 2 has been improved by removing the pointwise growth assumption on $|\nabla f|$ in the case $p=1$, and that in Theorem 3, a shrinking gradient Ricci soliton is shown to be isometric to $\R^m$ in the endpoint case $S_*=0$

MSC Class: 53C21

Characterizations of model manifolds by means of certain differential systems

Authors: Stefano Pigola, Michele Rimoldi

Abstract: We prove metric rigidity for complete manifolds supporting solutions of certain second order differential systems, thus extending classical works on a characterization of space-forms. In the route, we also discover new characterizations of space-forms. We next generalize results concerning metric rigidity via equations involving vector fields. We prove metric rigidity for complete manifolds supporting solutions of certain second order differential systems, thus extending classical works on a characterization of space-forms. In the route, we also discover new characterizations of space-forms. We next generalize results concerning metric rigidity via equations involving vector fields. △ Less

Submitted 5 March, 2009; originally announced March 2009.

MSC Class: 53C20