-
Characteristics and stability of soliton crystals in optical fibres for the purpose of optical frequency comb generation
Authors:
M. Zajnulina,
M. Böhm,
D. Bodenmüller,
K. Blow,
J. M. Chavez Boggio,
A. A. Rieznik,
M. M. Roth
Abstract:
We study the properties of a soliton crystal, an bound state of several optical pulses that propagate with a fixed temporal separation through the optical fibres of the proposed approach for generation of optical frequency combs (OFC) for astronomical spectrograph calibration. This approach - also being suitable for subpicosecond pulse generation for other applications - consists of a conventional…
▽ More
We study the properties of a soliton crystal, an bound state of several optical pulses that propagate with a fixed temporal separation through the optical fibres of the proposed approach for generation of optical frequency combs (OFC) for astronomical spectrograph calibration. This approach - also being suitable for subpicosecond pulse generation for other applications - consists of a conventional single-mode fibre and a suitably pumped Erbium-doped fibre. Two continuous-wave lasers are used as light source. The soliton crystal arises out of the initial deeply modulated laser field at low input powers; for higher input powers, it dissolves into free solitons. We study the soliton crystal build-up in the first fibre stage with respect to different fibre parameters (group-velocity dispersion, nonlinearity, and optical losses) and to the light source characteristics (laser frequency separation and intensity difference). We show that the soliton crystal can be described by two quantities, its fundamental frequency and the laser power-threshold at which the crystal dissolves into free solitons. The soliton crystal exhibits features of a linear and nonlinear optical pattern at the same time and is insensitive to the initial laser power fluctuations. We perform our studies using the numerical technique called Soliton Radiation Beat Analysis.
△ Less
Submitted 20 April, 2017;
originally announced April 2017.
-
Soliton Radiation Beat Analysis of Optical Pulses Generated from Two CW Lasers
Authors:
M. Zajnulina,
M. Böhm,
K. Blow,
A. A. Rieznik,
D. Giannone,
R. Haynes,
M. M. Roth
Abstract:
We propose a fibre-based approach for generation of optical frequency combs (OFCs) with the aim of calibration of astronomical spectrographs in the low and medium-resolution range. This approach includes two steps: in the first step, an appropriate state of optical pulses is generated and subsequently moulded in the second step delivering the desired OFC. More precisely, the first step is realised…
▽ More
We propose a fibre-based approach for generation of optical frequency combs (OFCs) with the aim of calibration of astronomical spectrographs in the low and medium-resolution range. This approach includes two steps: in the first step, an appropriate state of optical pulses is generated and subsequently moulded in the second step delivering the desired OFC. More precisely, the first step is realised by injection of two continuous-wave (CW) lasers into a conventional single-mode fibre, whereas the second step generates a broad OFC by using the optical solitons generated in step one as initial condition. We investigate the conversion of a bichromatic input wave produced by two initial CW lasers into a train of optical solitons, which happens in the fibre used as step one. Especially, we are interested in the soliton content of the pulses created in this fibre. For that, we study different initial conditions (a single cosine-hump, an Akhmediev breather, and a deeply modulated bichromatic wave) by means of soliton radiation beat analysis and compare the results to draw conclusion about the soliton content of the state generated in the first step. In case of a deeply modulated bichromatic wave, we observed the formation of a collective soliton crystal for low input powers and the appearance of separated solitons for high input powers. An intermediate state showing the features of both, the soliton crystal and the separated solitons, turned out to be most suitable for the generation of OFC for the purpose of calibration of astronomical spectrographs.
△ Less
Submitted 17 April, 2017;
originally announced April 2017.
-
Generation of optical frequency combs via four-wave mixing processes for low- and medium-resolution astronomy
Authors:
M. Zajnulina,
J. M. Chavez Boggio,
M. Böhm,
A. A. Rieznik,
T. Fremberg,
R. Haynes,
M. M. Roth
Abstract:
We investigate the generation of optical frequency combs through a cascade of four-wave mixing processes in nonlinear fibres with optimised parameters. The initial optical field consists of two continuous-wave lasers with frequency separation larger than 40 GHz (312.7 pm at 1531 nm). It propagates through three nonlinear fibres. The first fibre serves to pulse shape the initial sinusoidal-square p…
▽ More
We investigate the generation of optical frequency combs through a cascade of four-wave mixing processes in nonlinear fibres with optimised parameters. The initial optical field consists of two continuous-wave lasers with frequency separation larger than 40 GHz (312.7 pm at 1531 nm). It propagates through three nonlinear fibres. The first fibre serves to pulse shape the initial sinusoidal-square pulse, while a strong pulse compression down to sub-100 fs takes place in the second fibre which is an amplifying erbium-doped fibre. The last stage is a low-dispersion highly nonlinear fibre where the frequency comb bandwidth is increased and the line intensity is equalised. We model this system using the generalised nonlinear Schrödinger equation and investigate it in terms of fibre lengths, fibre dispersion, laser frequency separation and input powers with the aim to minimise the frequency comb noise. With the support of the numerical results, a frequency comb is experimentally generated, first in the near infra-red and then it is frequency-doubled into the visible spectral range. Using a MUSE-type spectrograph, we evaluate the comb performance for astronomical wavelength calibration in terms of equidistancy of the comb lines and their stability.
△ Less
Submitted 17 April, 2017;
originally announced April 2017.
-
High-speed tunable photonic crystal fiber-based femtosecond soliton source without dispersion pre-compensation
Authors:
Martín Caldarola,
Víctor A. Bettachini,
Andrés A. Rieznik,
Pablo G. Konig,
Martín E. Masip,
Diego F. Grosz,
Andrea V. Bragas
Abstract:
We present a high-speed wavelength tunable photonic crystal fiber-based source capable of generating tunable femtosecond solitons in the infrared region. Through measurements and numerical simulation, we show that both the pulsewidth and the spectral width of the output pulses remain nearly constant over the entire tuning range from 860 to 1160 nm. This remarkable behavior is observed even when pu…
▽ More
We present a high-speed wavelength tunable photonic crystal fiber-based source capable of generating tunable femtosecond solitons in the infrared region. Through measurements and numerical simulation, we show that both the pulsewidth and the spectral width of the output pulses remain nearly constant over the entire tuning range from 860 to 1160 nm. This remarkable behavior is observed even when pump pulses are heavily chirped (7400 fs^2), which allows to avoid bulky compensation optics, or the use of another fiber, for dispersion compensation usually required by the tuning device.
△ Less
Submitted 15 February, 2012;
originally announced February 2012.
-
Multi-wavelength source at ITU-T grid based on ultra-flattened dispersion photonic crystal fibers
Authors:
Arismar Cerqueira S. Jr.,
J. D. Marconi,
L. H. Gabrielli,
A. A. Rieznik,
H. E. Hernandez-Figueroa,
H. L. Fragnito,
J. C. Knight
Abstract:
We report on the development of a multi-wavelength source locked to the ITU-T grid at 100 GHz spacing and based on ultra-flattened dispersion photonic crystal fibers. The ITU-T grid frequencies are generated by taking advantage of multiple four-wave mixing processes. We experimentally obtained 250 products spanning over 200nm by launching 03 strong pump signals. Simulations based on Split-Step F…
▽ More
We report on the development of a multi-wavelength source locked to the ITU-T grid at 100 GHz spacing and based on ultra-flattened dispersion photonic crystal fibers. The ITU-T grid frequencies are generated by taking advantage of multiple four-wave mixing processes. We experimentally obtained 250 products spanning over 200nm by launching 03 strong pump signals. Simulations based on Split-Step Fourier Method have been carried out in order to investigate and improve the performance of this nonlinear optical device.
△ Less
Submitted 16 June, 2008;
originally announced June 2008.
-
Introduction to Quantum Cryptography
Authors:
Gustavo Rigolin,
Andres A. Rieznik
Abstract:
We show in details the four quantum key distribution protocols which initiated the important field of quantum cryptography, using an accessible language for undergraduate students. We begin presenting the BB84 protocol, which uses polarization states of photons in order to transmit cryptographic keys. Thereupon we show the E91 protocol, whose security is based on the use of singlet states to gen…
▽ More
We show in details the four quantum key distribution protocols which initiated the important field of quantum cryptography, using an accessible language for undergraduate students. We begin presenting the BB84 protocol, which uses polarization states of photons in order to transmit cryptographic keys. Thereupon we show the E91 protocol, whose security is based on the use of singlet states to generate a random sequence of bits. We end the paper with the BBM92 and the B92 protocol. These last two protocols can be seen as simplified versions of the first two.
△ Less
Submitted 14 November, 2005;
originally announced November 2005.
-
Spontaneous decay rates in active waveguides
Authors:
A. A. Rieznik,
G. Rigolin
Abstract:
We present a new method to measure the guided, radiated and total decay rates in one-dimensional waveguides. It is also theoretically shown that large modifications of the total decay rate can be achieved in realistic EDFAs and EDWAs with effective mode area radii smaller than ~ 1 micrometer.
We present a new method to measure the guided, radiated and total decay rates in one-dimensional waveguides. It is also theoretically shown that large modifications of the total decay rate can be achieved in realistic EDFAs and EDWAs with effective mode area radii smaller than ~ 1 micrometer.
△ Less
Submitted 17 May, 2005; v1 submitted 6 October, 2004;
originally announced October 2004.