-
In-operando microwave scattering-parameter calibrated measurement of a Josephson travelling wave parametric amplifier
Authors:
S. H. Shin,
M. Stanley,
W. N. Wong,
T. Sweetnam,
A. Elarabi,
T. Lindström,
N. M. Ridler,
S. E. de Graaf
Abstract:
Superconducting travelling wave parametric amplifiers (TWPAs) are broadband near-quantum limited microwave amplifiers commonly used for qubit readout and a wide range of other applications in quantum technologies. The performance of these amplifiers depends on achieving impedance matching to minimise reflected signals. Here we apply a microwave calibration technique to extract the S-parameters of…
▽ More
Superconducting travelling wave parametric amplifiers (TWPAs) are broadband near-quantum limited microwave amplifiers commonly used for qubit readout and a wide range of other applications in quantum technologies. The performance of these amplifiers depends on achieving impedance matching to minimise reflected signals. Here we apply a microwave calibration technique to extract the S-parameters of a Josephson junction based TWPA in-operando. This enables reflections occurring at the TWPA and its extended network of components to be quantified, and we find that the in-operation performance can be well described by the off-state measured S-parameters.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Engineering the microwave to infrared noise photon flux for superconducting quantum systems
Authors:
Sergey Danilin,
João Barbosa,
Michael Farage,
Zimo Zhao,
Xiaobang Shang,
Jonathan Burnett,
Nick Ridler,
Chong Li,
Martin Weides
Abstract:
Electromagnetic filtering is essential for the coherent control, operation and readout of superconducting quantum circuits at milliKelvin temperatures. The suppression of spurious modes around transition frequencies of a few GHz is well understood and mainly achieved by on-chip and package considerations. Noise photons of higher frequencies -- beyond the pair-breaking energies -- cause decoherence…
▽ More
Electromagnetic filtering is essential for the coherent control, operation and readout of superconducting quantum circuits at milliKelvin temperatures. The suppression of spurious modes around transition frequencies of a few GHz is well understood and mainly achieved by on-chip and package considerations. Noise photons of higher frequencies -- beyond the pair-breaking energies -- cause decoherence and require spectral engineering before reaching the packaged quantum chip. The external wires that pass into the refrigerator and go down to the quantum circuit provide a direct path for these photons. This article contains quantitative analysis and experimental data for the noise photon flux through coaxial, filtered wiring. The attenuation of the coaxial cable at room temperature and the noise photon flux estimates for typical wiring configurations are provided. Compact cryogenic microwave low-pass filters with CR-110 and Esorb-230 absorptive dielectric fillings are presented along with experimental data at room and cryogenic temperatures up to 70 GHz. Filter cut-off frequencies between 1 to 10 GHz are set by the filter length, and the roll-off is material dependent. The relative dielectric permittivity and magnetic permeability for the Esorb-230 material in the pair-breaking frequency range of 75 to 110 GHz are measured, and the filter properties in this frequency range are calculated. The estimated dramatic suppression of the noise photon flux due to the filter proves its usefulness for experiments with superconducting quantum systems.
△ Less
Submitted 19 January, 2022; v1 submitted 20 July, 2021;
originally announced July 2021.
-
Terahertz wave generation using a soliton microcomb
Authors:
Shuangyou Zhang,
Jonathan Silver,
Xiaobang Shang,
Leonardo Del Bino,
Nick Ridler,
Pascal Del'Haye
Abstract:
The Terahertz or millimeter wave frequency band (300 GHz - 3 THz) is spectrally located between microwaves and infrared light and has attracted significant interest for applications in broadband wireless communications, space-borne radiometers for Earth remote sensing, astrophysics, and imaging. In particular optically generated THz waves are of high interest for low-noise signal generation. In pa…
▽ More
The Terahertz or millimeter wave frequency band (300 GHz - 3 THz) is spectrally located between microwaves and infrared light and has attracted significant interest for applications in broadband wireless communications, space-borne radiometers for Earth remote sensing, astrophysics, and imaging. In particular optically generated THz waves are of high interest for low-noise signal generation. In particular optically generated THz waves are of high interest for low-noise signal generation. Here, we propose and demonstrate stabilized terahertz wave generation using a microresonator-based frequency comb (microcomb). A unitravelling-carrier photodiode (UTC-PD) converts low-noise optical soliton pulses from the microcomb to a terahertz wave at the soliton's repetition rate (331 GHz). With a free-running microcomb, the Allan deviation of the Terahertz signal is 4.5*10^-9 at 1 s measurement time with a phase noise of -72 dBc/Hz (-118 dBc/Hz) at 10 kHz (10 MHz) offset frequency. By locking the repetition rate to an in-house hydrogen maser, in-loop fractional frequency stabilities of 9.6*10^-15 and 1.9*10^-17 are obtained at averaging times of 1 s and 2000 s respectively, limited by the maser reference signal. Moreover, the terahertz signal is successfully used to perform a proof-of-principle demonstration of terahertz imaging of peanuts. Combining the monolithically integrated UTC-PD with an on-chip microcomb, the demonstrated technique could provide a route towards highly stable continuous terahertz wave generation in chip-scale packages for out-of-the-lab applications. In particular, such systems would be useful as compact tools for high-capacity wireless communication, spectroscopy, imaging, remote sensing, and astrophysical applications.
△ Less
Submitted 30 August, 2019;
originally announced August 2019.
-
Analyzing Uncertainty Matrices Associated with Multiple S-parameter Measurements
Authors:
Nick M. Ridler,
Martin J. Salter
Abstract:
This paper presents a detailed analysis of uncertainty matrices (i.e. measurement covariance matrices) associated with multiple complex-valued microwave scattering S-parameter measurements. The analysis is based on forming combinations of (2 X 2) sub-matrices from selected elements in the uncertainty matrix and using these sub-matrices to define uncertainty ellipses in two-dimensional measurement…
▽ More
This paper presents a detailed analysis of uncertainty matrices (i.e. measurement covariance matrices) associated with multiple complex-valued microwave scattering S-parameter measurements. The analysis is based on forming combinations of (2 X 2) sub-matrices from selected elements in the uncertainty matrix and using these sub-matrices to define uncertainty ellipses in two-dimensional measurement planes. These uncertainty ellipses can be used to assess the quality, accuracy and validity of the measurements. A simple example is given using measurements made on a waveguide mismatched line section at frequencies from 75 GHz to 110 GHz. The analysis is also useful when multiple S-parameter measurements are used as input quantities for measurement models used to determine other measurement quantities (i.e. as output quantities).
△ Less
Submitted 19 September, 2018;
originally announced September 2018.
