-
Kicking the Can Down the Road: Understanding the Effects of Delaying the Deployment of Stratospheric Aerosol Injection
Authors:
Ezra Brody,
Daniele Visioni,
Ewa M. Bednarz,
Ben Kravitz,
Douglas G. MacMartin,
Jadwiga H. Richter,
Mari R. Tye
Abstract:
Climate change is a prevalent threat, and it is unlikely that current mitigation efforts will be enough to avoid unwanted impacts. One potential option to reduce climate change impacts is the use of stratospheric aerosol injection (SAI). Even if SAI is ultimately deployed, it might be initiated only after some temperature target is exceeded. The consequences of such a delay are assessed herein. Th…
▽ More
Climate change is a prevalent threat, and it is unlikely that current mitigation efforts will be enough to avoid unwanted impacts. One potential option to reduce climate change impacts is the use of stratospheric aerosol injection (SAI). Even if SAI is ultimately deployed, it might be initiated only after some temperature target is exceeded. The consequences of such a delay are assessed herein. This study compares two cases, with the same target global mean temperature of 1.5C above preindustrial, but start dates of 2035 or a delayed start in 2045. We make use of simulations in the Community Earth System Model version 2 with the Whole Atmosphere Coupled Chemistry Model version 6 (CESM2-WACCM6), using SAI under the SSP2-4.5 emissions pathway. We find that delaying the start of deployment (relative to the target temperature) necessitates lower net radiative forcing (-30%) and thus larger sulfur dioxide injection rates (+20%), even after surface temperatures converge, to compensate for the extra energy absorbed by the Earth system. However, many of the surface climate differences between the 2035 and 2045 start simulations appear to be small during the 10-25 years following the delayed SAI start, although longer simulations would be needed to assess any longer-term impacts in this model. In addition, irreversibilities and tip** points that might be triggered during the period of increased warming may not be adequately represented in the model but could change this conclusion in the real world.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Information flow and Laplacian dynamics on local optima networks
Authors:
Hendrik Richter,
Sarah L. Thomson
Abstract:
We propose a new way of looking at local optima networks (LONs). LONs represent fitness landscapes; the nodes are local optima, and the edges are search transitions between them. Many metrics computed on LONs have been proposed and shown to be linked to metaheuristic search difficulty. These have typically considered LONs as describing static structures. In contrast to this, Laplacian dynamics (LD…
▽ More
We propose a new way of looking at local optima networks (LONs). LONs represent fitness landscapes; the nodes are local optima, and the edges are search transitions between them. Many metrics computed on LONs have been proposed and shown to be linked to metaheuristic search difficulty. These have typically considered LONs as describing static structures. In contrast to this, Laplacian dynamics (LD) is an approach to consider the information flow across a network as a dynamical process. We adapt and apply LD to the context of LONs. As a testbed, we consider instances from the quadratic assignment problem (QAP) library. Metrics related to LD are proposed and these are compared with existing LON metrics. The results show that certain LD metrics are strong predictors of metaheuristic performance for iterated local search and tabu search.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Physics-Informed Priors with Application to Boundary Layer Velocity
Authors:
Luca Menicali,
David H. Richter,
Stefano Castruccio
Abstract:
One of the most popular recent areas of machine learning predicates the use of neural networks augmented by information about the underlying process in the form of Partial Differential Equations (PDEs). These physics-informed neural networks are obtained by penalizing the inference with a PDE, and have been cast as a minimization problem currently lacking a formal approach to quantify the uncertai…
▽ More
One of the most popular recent areas of machine learning predicates the use of neural networks augmented by information about the underlying process in the form of Partial Differential Equations (PDEs). These physics-informed neural networks are obtained by penalizing the inference with a PDE, and have been cast as a minimization problem currently lacking a formal approach to quantify the uncertainty. In this work, we propose a novel model-based framework which regards the PDE as a prior information of a deep Bayesian neural network. The prior is calibrated without data to resemble the PDE solution in the prior mean, while our degree in confidence on the PDE with respect to the data is expressed in terms of the prior variance. The information embedded in the PDE is then propagated to the posterior yielding physics-informed forecasts with uncertainty quantification. We apply our approach to a simulated viscous fluid and to experimentally-obtained turbulent boundary layer velocity in a wind tunnel using an appropriately simplified Navier-Stokes equation. Our approach requires very few observations to produce physically-consistent forecasts as opposed to non-physical forecasts stemming from non-informed priors, thereby allowing forecasting complex systems where some amount of data as well as some contextual knowledge is available.
△ Less
Submitted 21 November, 2023;
originally announced November 2023.
-
A Physics-Informed, Deep Double Reservoir Network for Forecasting Boundary Layer Velocity
Authors:
Matthew Bonas,
David H. Richter,
Stefano Castruccio
Abstract:
When a fluid flows over a solid surface, it creates a thin boundary layer where the flow velocity is influenced by the surface through viscosity, and can transition from laminar to turbulent at sufficiently high speeds. Understanding and forecasting the fluid dynamics under these conditions is one of the most challenging scientific problems in fluid dynamics. It is therefore of high interest to fo…
▽ More
When a fluid flows over a solid surface, it creates a thin boundary layer where the flow velocity is influenced by the surface through viscosity, and can transition from laminar to turbulent at sufficiently high speeds. Understanding and forecasting the fluid dynamics under these conditions is one of the most challenging scientific problems in fluid dynamics. It is therefore of high interest to formulate models able to capture the nonlinear spatio-temporal velocity structure as well as produce forecasts in a computationally efficient manner. Traditional statistical approaches are limited in their ability to produce timely forecasts of complex, nonlinear spatio-temporal structures which are at the same time able to incorporate the underlying flow physics. In this work, we propose a model to accurately forecast boundary layer velocities with a deep double reservoir computing network which is capable of capturing the complex, nonlinear dynamics of the boundary layer while at the same time incorporating physical constraints via a penalty obtained by a Partial Differential Equation (PDE). Simulation studies on a one-dimensional viscous fluid demonstrate how the proposed model is able to produce accurate forecasts while simultaneously accounting for energy loss. The application focuses on boundary layer data on a water tunnel with a PDE penalty derived from an appropriate simplification of the Navier-Stokes equations, showing forecasts improved by 33.7% and 80.0% in terms of mass conservation and variability of velocity fluctuation, respectfully, against non physics-informed methods.
△ Less
Submitted 21 May, 2024; v1 submitted 9 November, 2023;
originally announced November 2023.
-
Do Random and Chaotic Sequences Really Cause Different PSO Performance? Further Results
Authors:
{Paul Moritz Nörenberg,
Hendrik Richter
Abstract:
Empirical results show that PSO performance may be different if using either chaotic or random sequences to drive the algorithm's search dynamics. We analyze the phenomenon by evaluating the performance based on a benchmark of test functions and comparing random and chaotic sequences according to equality or difference in underlying distribution or density. Our results show that the underlying dis…
▽ More
Empirical results show that PSO performance may be different if using either chaotic or random sequences to drive the algorithm's search dynamics. We analyze the phenomenon by evaluating the performance based on a benchmark of test functions and comparing random and chaotic sequences according to equality or difference in underlying distribution or density. Our results show that the underlying distribution is the main influential factor in performance and thus the assumption of general and systematic performance differences between chaos and random appears not plausible.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
A comparison of machine learning surrogate models of street-scale flooding in Norfolk, Virginia
Authors:
Diana McSpadden,
Steven Goldenberg,
Binata Roy,
Malachi Schram,
Jonathan L. Goodall,
Heather Richter
Abstract:
Low-lying coastal cities, exemplified by Norfolk, Virginia, face the challenge of street flooding caused by rainfall and tides, which strain transportation and sewer systems and can lead to property damage. While high-fidelity, physics-based simulations provide accurate predictions of urban pluvial flooding, their computational complexity renders them unsuitable for real-time applications. Using d…
▽ More
Low-lying coastal cities, exemplified by Norfolk, Virginia, face the challenge of street flooding caused by rainfall and tides, which strain transportation and sewer systems and can lead to property damage. While high-fidelity, physics-based simulations provide accurate predictions of urban pluvial flooding, their computational complexity renders them unsuitable for real-time applications. Using data from Norfolk rainfall events between 2016 and 2018, this study compares the performance of a previous surrogate model based on a random forest algorithm with two deep learning models: Long Short-Term Memory (LSTM) and Gated Recurrent Unit (GRU). This investigation underscores the importance of using a model architecture that supports the communication of prediction uncertainty and the effective integration of relevant, multi-modal features.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Comparing phase-space and phenomenological modeling approaches for Lagrangian particles settling in a turbulent boundary layer
Authors:
Andrew P. Grace,
David H. Richter,
Andrew D. Bragg
Abstract:
Under the right circumstances, inertial particles (such as sand or dust) settling through the atmospheric boundary layer can experience a net enhancement in their average settling velocity due to their inertia. Since this enhancement arises due to their interactions with the surrounding turbulence it must be modelled at coarse scales. Models for the enhanced settling velocity (or deposition) of th…
▽ More
Under the right circumstances, inertial particles (such as sand or dust) settling through the atmospheric boundary layer can experience a net enhancement in their average settling velocity due to their inertia. Since this enhancement arises due to their interactions with the surrounding turbulence it must be modelled at coarse scales. Models for the enhanced settling velocity (or deposition) of the dispersed phase that find practical use in mesoscale weather models are often ad hoc or are built on phenomenological closure assumptions, meaning that the general deposition rate of particle is a key uncertainty. Instead of taking a phenomenological approach, exact phase space methods can be used to model the physical mechanisms responsible for the enhanced settling, and a more general parameterization of the enhanced settling of inertial particles can be built. In this work, we use direct numerical simulations (DNS) and phase space methods to evaluate the efficacy of phenomenological modelling approaches for the enhanced settling velocity of inertial particles with varying friction Stokes numbers and settling velocity parameters. We use the DNS data to estimate profiles of a drift-diffusion based parameterization of the fluid velocity sampled by the particles, which is key for determining the settling velocity behaviour of particles with low to moderate Stokes number. We find that by increasing the settling velocity parameter at moderate friction Stokes number, the magnitude of preferential swee** is modified, and this behaviour is explained by the drift component. We then use these profiles to argue that the eddy-diffusivity-like closure used in phenomenological models is incomplete, relying on inadequate empirical corrections. Finally, we discuss opportunities for reconciling exact phase space approaches with simpler phenomenological approaches for use in coarse-scale weather models.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
Do Random and Chaotic Sequences Really Cause Different PSO Performance?
Authors:
Paul Moritz Nörenberg,
Hendrik Richter
Abstract:
Our topic is performance differences between using random and chaos for particle swarm optimization (PSO). We take random sequences with different probability distributions and compare them to chaotic sequences with different but also with same density functions. This enables us to differentiate between differences in the origin of the sequences (random number generator or chaotic nonlinear system…
▽ More
Our topic is performance differences between using random and chaos for particle swarm optimization (PSO). We take random sequences with different probability distributions and compare them to chaotic sequences with different but also with same density functions. This enables us to differentiate between differences in the origin of the sequences (random number generator or chaotic nonlinear system) and statistical differences expressed by the underlying distributions. Our findings (obtained by evaluating the PSO performance for various benchmark problems using statistical hypothesis testing) cast considerable doubt on previous results which compared random to chaos and suggested that the choice leads to intrinsic differences in performance.
△ Less
Submitted 6 April, 2023; v1 submitted 9 February, 2023;
originally announced March 2023.
-
Model based MIN/MAX override control of centrifugal compressor systems
Authors:
Rico Schulze,
Hendrik Richter
Abstract:
We consider an application-oriented nonlinear control of centrifugal compressors. Industrial applications require the compressor system to adjust to variable process demands and to be restricted to the valid operation range (e.g. surge limit). We modify a compressor model of Gravdahl and Egeland to account for characteristic features of industrial compressors and combine the framework of nonlinear…
▽ More
We consider an application-oriented nonlinear control of centrifugal compressors. Industrial applications require the compressor system to adjust to variable process demands and to be restricted to the valid operation range (e.g. surge limit). We modify a compressor model of Gravdahl and Egeland to account for characteristic features of industrial compressors and combine the framework of nonlinear output regulation via the internal model principle with MIN/MAX-override control in order to implement trajectory tracking between given state constraints. Furthermore the switching scheme as well as the practical stability of the closed-loop MIMO system is analysed by the corresponding switched and impulsive error system. The override control is demonstrated by applying discharge pressure control, anti-surge control and maximum discharge pressure limitation.
△ Less
Submitted 14 February, 2023;
originally announced February 2023.
-
What is the Best Way to Optimally Parameterize the MPC Cost Function for Vehicle Guidance?
Authors:
David Stenger,
Robert Ritschel,
Felix Krabbes,
Rick Voßwinkel,
Hendrik Richter
Abstract:
Model predictive control (MPC) is a promising approach for the lateral and longitudinal control of autonomous vehicles. However, the parameterization of the MPC with respect to high-level requirements such as passenger comfort as well as lateral and longitudinal tracking is a challenging task. Numerous tuning parameters as well as conflicting requirements need to be considered. This contribution f…
▽ More
Model predictive control (MPC) is a promising approach for the lateral and longitudinal control of autonomous vehicles. However, the parameterization of the MPC with respect to high-level requirements such as passenger comfort as well as lateral and longitudinal tracking is a challenging task. Numerous tuning parameters as well as conflicting requirements need to be considered. This contribution formulates the MPC tuning task as a multi-objective optimization problem. Solving it is challenging for two reasons: First, MPC-parameterizations are evaluated on an computationally expensive simulation environment. As a result, the used optimization algorithm needs to be as sampleefficient as possible. Second, for some poor parameterizations the simulation cannot be completed and therefore useful objective function values are not available (learning with crash constraints). In this contribution, we compare the sample efficiency of multi-objective particle swarm optimization (MOPSO), a genetic algorithm (NSGA-II) and multiple versions of Bayesian optimization (BO). We extend BO, by introducing an adaptive batch size to limit the computational overhead and by a method on how to deal with crash constraints. Results show, that BO works best for a small budget, NSGA-II is best for medium budgets and for large budgets none of the evaluated optimizers is superior to random search. Both proposed BO extensions are shown to be beneficial.
△ Less
Submitted 11 December, 2022;
originally announced December 2022.
-
A stochastic model for the residence time of solid particles in turbulent Rayleigh-Bénard Flow
Authors:
Colin J. Denzel,
Andrew D. Bragg,
David H. Richter
Abstract:
The Pi Chamber, located at Michigan Technological University, generates moist turbulent Rayleigh-Bénard flow in order to replicate steady-state cloud conditions. We take inspiration from this setup and consider a particle-laden, convectively-driven turbulent flow using direct numerical simulation (DNS). The aim of our study is to develop a simple stochastic model that can accurately describe the r…
▽ More
The Pi Chamber, located at Michigan Technological University, generates moist turbulent Rayleigh-Bénard flow in order to replicate steady-state cloud conditions. We take inspiration from this setup and consider a particle-laden, convectively-driven turbulent flow using direct numerical simulation (DNS). The aim of our study is to develop a simple stochastic model that can accurately describe the residence times of the particles in the flow, this time being determined by the complex competition between the gravitational settling of the particles, and the interaction of the particles with the turbulent structures in the flow. A simple conceptual picture underlies the stochastic model, namely that the particles take repeated trips between the top and bottom boundaries, driven by the convective cells that occur in Rayleigh-Bénard turbulence, and that their residence times are determined by the time it takes to complete one of these trips, which varies from one trip to another, and the probability of falling out to the bottom boundary after each trip. Despite the simplicity of the model, it yields quantitatively accurate predictions of the distribution of the particle residence times in the flow. We independently vary the Stokes numbers and settling velocities in order to shed light on the independent roles that gravity and inertia play in governing these residence times.
△ Less
Submitted 27 August, 2022;
originally announced August 2022.
-
Spectral dynamics of guided edge removals and identifying transient amplifiers for death-Birth updating
Authors:
Hendrik Richter
Abstract:
The paper deals with two interrelated topics, identifying transient amplifiers in an iterative process and analyzing the process by its spectral dynamics, which is the change in the graph spectra by edge manipulations. Transient amplifiers are networks representing population structures which shift the balance between natural selection and random drift. Thus, amplifiers are highly relevant for und…
▽ More
The paper deals with two interrelated topics, identifying transient amplifiers in an iterative process and analyzing the process by its spectral dynamics, which is the change in the graph spectra by edge manipulations. Transient amplifiers are networks representing population structures which shift the balance between natural selection and random drift. Thus, amplifiers are highly relevant for understanding the relationships between spatial structures and evolutionary dynamics. We study an iterative procedure to identify transient amplifiers for death-Birth updating. The algorithm starts with a regular input graph and iteratively removes edges until desired structures are achieved. Thus, a sequence of candidate graphs is obtained. The edge removals are guided by quantities derived from the sequence of candidate graphs. Moreover, we are interested in the Laplacian spectra of the candidate graphs and analyze the iterative process by its spectral dynamics. The results show that although transient amplifiers for death-Birth updating are rare, a substantial number of them can be obtained by the proposed procedure. The graphs identified share structural properties and have some similarity to dumbbell and barbell graphs. Also, the spectral dynamics possesses characteristic features useful for deducing links between structural and spectral properties and for distinguishing transient amplifiers among evolutionary graphs in general.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
A 3.5-THz, x6-Harmonic, Single-Ended Schottky Diode Mixer for Frequency Stabilization of Quantum-Cascade Lasers
Authors:
Divya Jayasankar,
Vladimir Drakinskiy,
Nick Rothbart,
Heiko Richter,
Xiang Lü,
Lutz Schrottke,
Holger T. Grahn,
Martin Wienold,
Heinz-Wilhelm Hübers,
Peter Sobis,
Jan Stake
Abstract:
Efficient and compact frequency converters are essential for frequency stabilization of terahertz sources. In this paper, we present a 3.5-THz, x6-harmonic, integrated Schottky diode mixer operating at room temperature. The designed frequency converter is based on a single-ended, planar Schottky diode with a sub-micron anode contact area defined on a suspended 2-$μ$m ultra-thin GaAs substrate. The…
▽ More
Efficient and compact frequency converters are essential for frequency stabilization of terahertz sources. In this paper, we present a 3.5-THz, x6-harmonic, integrated Schottky diode mixer operating at room temperature. The designed frequency converter is based on a single-ended, planar Schottky diode with a sub-micron anode contact area defined on a suspended 2-$μ$m ultra-thin GaAs substrate. The dc-grounded anode pad was combined with the radio frequency E-plane probe, which resulted in an electrically compact circuit. At 200 MHz intermediate frequency, a mixer conversion loss of about 59 dB is measured and resulting in a 40 dB signal-to-noise ratio for phase locking 3.5-THz quantum-cascade laser. Using a quasi-static diode model combined with electromagnetic simulations, good agreement with the measured results was obtained. Harmonic frequency converters without the need of cryogenic cooling will help in the realization of highly sensitive space and air-borne heterodyne receivers.
△ Less
Submitted 29 August, 2021; v1 submitted 17 June, 2021;
originally announced July 2021.
-
Targeted Muscle Effort Distribution with Exercise Robots: Trajectory and Resistance Effects
Authors:
Humberto De las Casas,
Santino Bianco,
Hanz Richter
Abstract:
The objective of this work is to relate muscle effort distributions to the trajectory and resistance settings of a robotic exercise and rehabilitation machine. Muscular effort distribution, representing the participation of each muscle in the training activity, was measured with electromyography sensors (EMG) and defined as the individual activation divided by the total muscle group activation. A…
▽ More
The objective of this work is to relate muscle effort distributions to the trajectory and resistance settings of a robotic exercise and rehabilitation machine. Muscular effort distribution, representing the participation of each muscle in the training activity, was measured with electromyography sensors (EMG) and defined as the individual activation divided by the total muscle group activation. A four degrees-of-freedom robot and its impedance control system are used to create advanced exercise protocols whereby the user is asked to follow a path against the machine's neutral path and resistance. In this work, the robot establishes a zero-effort circular path, and the subject is asked to follow an elliptical trajectory. The control system produces a user-defined stiffness between the deviations from the neutral path and the torque applied by the subject. The trajectory and resistance settings used in the experiments were the orientation of the ellipse and a stiffness parameter. Multiple combinations of these parameters were used to measure their effects on the muscle effort distribution. An artificial neural network (ANN) used part of the data for training the model. Then, the accuracy of the model was evaluated using the rest of the data. The results show how the precision of the model is lost over time. These outcomes show the complexity of the muscle dynamics for long-term estimations suggesting the existence of time-varying dynamics possibly associated with fatigue.
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Observation and calibration strategies for large-scale multi-beam velocity-resolved map** of the [CII] emission in the Orion molecular cloud
Authors:
R. Higgins,
S. Kabanovic,
C. Pabst,
D. Teyssier,
J. R. Goicoechea,
O. Berne,
E. Chambers,
M. Wolfire,
S. Suri,
C. Buchbender,
Y. Okada,
M. Mertens,
A. Parikka,
R. Aladro,
H. Richter,
R. Güsten,
J. Stutzki,
A. G. G. M. Tielens
Abstract:
Context. The [CII] 158micron far-infrared fine-structure line is one of the dominant cooling lines of the star-forming interstellar medium (ISM). Hence [CII] emission originates in and thus can be used to trace a range of ISM processes. Velocity-resolved large-scale map** of [CII] in star-forming regions provides a unique perspective of the kinematics of these regions and their interactions with…
▽ More
Context. The [CII] 158micron far-infrared fine-structure line is one of the dominant cooling lines of the star-forming interstellar medium (ISM). Hence [CII] emission originates in and thus can be used to trace a range of ISM processes. Velocity-resolved large-scale map** of [CII] in star-forming regions provides a unique perspective of the kinematics of these regions and their interactions with the exciting source of radiation.
Aims. We explore the scientific applications of large-scale map** of velocity-resolved [CII] observations. With the [CII] observations, we investigate the effect of stellar feedback on the ISM. We present the details of observation, calibration, and data reduction using a heterodyne array receiver mounted on an airborne observatory.
Results. A square-degree [CII] map with a spectral resolution of 0.3 km/s is presented. The scientific potential of this data is summarized with discussion of mechanical and radiative stellar feedback, filament tracing using [CII], [CII] opacity effects, [CII] and carbon recombination lines, and [CII] interaction with the large molecular cloud. The data quality and calibration is discussed in detail, and new techniques are presented to mitigate the effects of unavoidable instrument deficiencies (e.g. baseline stability) and thus to improve the data quality. A comparison with a smaller [CII] map taken with the Herschel/Heterodyne Instrument for the Far-Infrared (HIFI) spectrometer is presented.
△ Less
Submitted 1 July, 2021; v1 submitted 29 June, 2021;
originally announced June 2021.
-
Wrong Colored Vermeer: Color-Symmetric Image Distortion
Authors:
Hendrik Richter
Abstract:
Color symmetry implies that the colors of geometrical objects are assigned according to their symmetry properties. It is defined by associating the elements of the symmetry group with a color permutation. I use this concept for generative art and apply symmetry-consistent color distortions to images of paintings by Johannes Vermeer. The color permutations are realized as map**s of the HSV color…
▽ More
Color symmetry implies that the colors of geometrical objects are assigned according to their symmetry properties. It is defined by associating the elements of the symmetry group with a color permutation. I use this concept for generative art and apply symmetry-consistent color distortions to images of paintings by Johannes Vermeer. The color permutations are realized as map**s of the HSV color space onto itself.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
Designing color symmetry in stigmergic art
Authors:
Hendrik Richter
Abstract:
Color symmetry is an extension of symmetry imposed by isometric transformations and means that the colors of geometrical objects are assigned according to the symmetry properties of the objects. A color symmetry permutes the coloring of the objects consistently with their symmetry group. We apply this concept to bio-inspired generative art. Therefore, we interpret the geometrical objects as motifs…
▽ More
Color symmetry is an extension of symmetry imposed by isometric transformations and means that the colors of geometrical objects are assigned according to the symmetry properties of the objects. A color symmetry permutes the coloring of the objects consistently with their symmetry group. We apply this concept to bio-inspired generative art. Therefore, we interpret the geometrical objects as motifs that may repeat themselves with a symmetry-consistent coloring. The motifs are obtained by design principles from stigmergy. We discuss a design procedure and present visual results.
△ Less
Submitted 28 June, 2021;
originally announced June 2021.
-
An Overview of Energy-Optimal Impedance Control of Cooperative Robot Manipulators
Authors:
Amin Ghorbanpour,
Hanz Richter
Abstract:
An impedance-based control scheme is introduced for cooperative manipulators gras** a rigid load. The position and orientation of the load are to be maintained close to a desired trajectory, trading off tracking accuracy by low energy consumption and maintaining stability. To this end, the augmented dynamics of the robots, their actuators and the load is formed, and an impedance control is adopt…
▽ More
An impedance-based control scheme is introduced for cooperative manipulators gras** a rigid load. The position and orientation of the load are to be maintained close to a desired trajectory, trading off tracking accuracy by low energy consumption and maintaining stability. To this end, the augmented dynamics of the robots, their actuators and the load is formed, and an impedance control is adopted. A virtual control strategy is used to decouple torque control from actuator control. An optimization problem is then formulated using energy balance equations. The optimization finds the dam** and stiffness gains of the impedance relation such that the energy consumption is minimized. Furthermore, L2 stability techniques are used to allow for time-varying dam** and stiffness in the desired impedance. A numerical example is provided to demonstrate the results.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
Real-Time Trajectory Optimization in Robot-Assisted Exercise and Rehabilitation
Authors:
Humberto De las Casas,
Nicholas Chambers,
Hanz Richter,
Kenneth Sparks
Abstract:
This work focuses on the optimization of the training trajectory orientation using a robot as an advanced exercise machine (AEM) and muscle activations as biofeedback. Muscle recruitment patterns depend on trajectory parameters of the AEMs and correlate with the efficiency of exercise. Thus, improvements to training efficiency may be achieved by optimizing these parameters. The optimal regulation…
▽ More
This work focuses on the optimization of the training trajectory orientation using a robot as an advanced exercise machine (AEM) and muscle activations as biofeedback. Muscle recruitment patterns depend on trajectory parameters of the AEMs and correlate with the efficiency of exercise. Thus, improvements to training efficiency may be achieved by optimizing these parameters. The optimal regulation of these parameters is challenging because of the complexity of the physiological dynamics from person to person as a result of the unique physical features such as musculoskeletal distribution. Furthermore, these effects can vary due to fatigue, body temperature, and other physiological factors. In this paper, a model-free optimization method using Extremum Seeking Control (ESC) as a real-time optimizer is proposed. After selecting a muscle objective, this method seeks for the optimal combination of parameters using the muscle activations as biofeedback. The muscle objective can be selected by a therapist to emphasize or de-emphasize certain muscle groups. The feasibility of this method has been proven for the automatic regulation of an ellipsoidal curve orientation, suggesting the existence of two local optimal orientations. This methodology can also be applied to other parameter regulations using a different physiological effects such as oxygen consumption and heart rate as biofeedback.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
When is settling important for particle concentrations in wall-bounded turbulent flows?
Authors:
Andrew D. Bragg,
David H. Richter,
Guiquan Wang
Abstract:
We explore the role of gravitational settling on inertial particle concentrations in a wall-bounded turbulent flow. While it may be thought that settling can be ignored when the settling parameter $Sv\equiv v_s/u_τ$ is small ($v_s$ - Stokes settling velocity, $u_τ$ - fluid friction velocity), we show that even in this regime the settling may make a leading order contribution to the concentration p…
▽ More
We explore the role of gravitational settling on inertial particle concentrations in a wall-bounded turbulent flow. While it may be thought that settling can be ignored when the settling parameter $Sv\equiv v_s/u_τ$ is small ($v_s$ - Stokes settling velocity, $u_τ$ - fluid friction velocity), we show that even in this regime the settling may make a leading order contribution to the concentration profiles. This is because the importance of settling is determined, not by the size of $v_s$ compared with $u_τ$ or any other fluid velocity scale, but by the size of $v_s$ relative to the other mechanisms that control the vertical particle velocity and concentration profile. We explain this in the context of the particle mean-momentum equation, and show that in general, there always exists a region in the boundary layer where settling cannot be neglected, no matter how small $Sv$ is (provided it is finite). Direct numerical simulations confirm the arguments, and show that the near-wall concentration is highly dependent on $Sv$ even when $Sv\ll 1$, and can reduce by an order of magnitude when $Sv$ is increased from $O(10^{-4})$ and $O(10^{-2})$. The results also show that the preferential sampling of ejection events in the boundary layer by inertial particles when $Sv=0$ is profoundly altered as $Sv$ is increased, and is replaced by a preferential sampling of sweep events due to the onset of the preferential swee** mechanism.
△ Less
Submitted 9 September, 2021; v1 submitted 12 January, 2021;
originally announced January 2021.
-
Resistivity, Hall effect, and anisotropic superconducting coherence lengths of HgBa$_2$CaCu$_2$O$_{6+δ}$ thin films with different morphology
Authors:
H. Richter,
W. Lang,
M. Peruzzi,
H. Hattmansdorfer,
J. H. Durrell,
J. D. Pedarnig
Abstract:
Thin films of the high-temperature superconductor HgBa$_2$CaCu$_2$O$_{6+δ}$ have been prepared on SrTiO$_3$ substrates by pulsed-laser deposition of precursor films and subsequent annealing in mercury-vapor atmosphere. The microstructural properties of such films can vary considerably and have been analyzed by x-ray diffraction and atomic force microscopy. Whereas the resistivity is significantly…
▽ More
Thin films of the high-temperature superconductor HgBa$_2$CaCu$_2$O$_{6+δ}$ have been prepared on SrTiO$_3$ substrates by pulsed-laser deposition of precursor films and subsequent annealing in mercury-vapor atmosphere. The microstructural properties of such films can vary considerably and have been analyzed by x-ray diffraction and atomic force microscopy. Whereas the resistivity is significantly enhanced in samples with coarse-grained structure, the Hall effect shows little variation. This disparity is discussed based on models for transport properties in granular materials. We find that, despite of the morphological variation, all samples have similar superconducting properties. The critical temperatures $T_c \sim 121.2$ K $\dots 122.0$ K, resistivity, and Hall data indicate that the samples are optimally doped. The analyses of superconducting order parameter fluctuations in zero and finite magnetic fields yield the in-plane $ξ_{ab}(0) \sim 2.3$ nm $\dots 2.8$ nm and out-of-plane $ξ_{c}(0) \sim 0.17$ nm $ \dots 0.24$ nm Ginzburg-Landau coherence lengths at zero temperature. Hall measurements provide estimates of carrier scattering defects in the normal state and vortex pinning properties in the superconducting state inside the grains.
△ Less
Submitted 23 December, 2020;
originally announced December 2020.
-
Mechanisms governing the settling velocities and spatial distributions of inertial particles in wall-bounded turbulence
Authors:
Andrew D Bragg,
David H Richter,
Guiquan Wang
Abstract:
We use theory and Direct Numerical Simulations (DNS) to explore the average vertical velocities and spatial distributions of inertial particles settling in a wall-bounded turbulent flow. The theory is based on the exact phase-space equation for the Probability Density Function describing particle positions and velocities. This allowed us to identify the distinct physical mechanisms governing the p…
▽ More
We use theory and Direct Numerical Simulations (DNS) to explore the average vertical velocities and spatial distributions of inertial particles settling in a wall-bounded turbulent flow. The theory is based on the exact phase-space equation for the Probability Density Function describing particle positions and velocities. This allowed us to identify the distinct physical mechanisms governing the particle transport. We then examined the asymptotic behavior of the particle motion near the wall, revealing the fundamental differences to the near wall behavior that is produced when incorporating gravitational settling. When the average vertical particle mass flux is zero, the averaged vertical particle velocity is zero away from the wall due to the particles preferentially sampling regions where the fluid velocity is positive, which balances with the downward Stokes settling velocity. When the average mass flux is negative, the combined effects of turbulence and particle inertia lead to average vertical particle velocities that can significantly exceed the Stokes settling velocity, by as much as ten times. Sufficiently far from the wall, the enhanced vertical velocities are due to the preferential swee** mechanism. However, as the particles approach the wall, the contribution from the preferential swee** mechanism becomes small, and a downward contribution from the turbophoretic velocity dominates the behavior. Close to the wall, the particle concentration grows as a power-law, but the nature of this power law depends on the particle Stokes number. Finally, our results highlight how the Rouse model of particle concentration is to be modified for particles with finite inertia.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
FEEDBACK: a SOFIA Legacy Program to Study Stellar Feedback in Regions of Massive Star Formation
Authors:
N. Schneider,
R. Simon,
C. Guevara,
C. Buchbender,
R. D. Higgins,
Y. Okada,
J. Stutzki,
R. Guesten,
L. D. Anderson,
J. Bally,
H. Beuther,
L. Bonne,
S. Bontemps,
E. Chambers,
T. Csengeri,
U. U. Graf,
A. Gusdorf,
K. Jacobs,
S. Kabanovic,
R. Karim,
M. Luisi,
K. Menten,
M. Mertens,
B. Mookerjea,
V. Ossenkopf-Okada
, et al. (15 additional authors not shown)
Abstract:
FEEDBACK is a SOFIA legacy program dedicated to study the interaction of massive stars with their environment. It performs a survey of 11 galactic high mass star forming regions in the 158 $μ$m (1.9 THz) line of CII and the 63 $μ$m (4.7 THz) line of OI. We employ the 14 pixel LFA and 7 pixel HFA upGREAT instrument to spectrally resolve (0.24 MHz) these FIR structure lines. With an observing time o…
▽ More
FEEDBACK is a SOFIA legacy program dedicated to study the interaction of massive stars with their environment. It performs a survey of 11 galactic high mass star forming regions in the 158 $μ$m (1.9 THz) line of CII and the 63 $μ$m (4.7 THz) line of OI. We employ the 14 pixel LFA and 7 pixel HFA upGREAT instrument to spectrally resolve (0.24 MHz) these FIR structure lines. With an observing time of 96h, we will cover $\sim$6700 arcmin$^2$ at 14.1$''$ angular resolution for the CII line and 6.3$''$ for the OI line. The observations started in spring 2019 (Cycle 7). Our aim is to understand the dynamics in regions dominated by different feedback processes from massive stars such as stellar winds, thermal expansion, and radiation pressure, and to quantify the mechanical energy injection and radiative heating efficiency. The CII line provides the kinematics of the gas and is one of the dominant cooling lines of gas for low to moderate densities and UV fields. The OI line traces warm and high-density gas, excited in photodissociations regions with a strong UV field or by shocks. The source sample spans a broad range in stellar characteristics from single OB stars, to small groups of O stars, to rich young stellar clusters, to ministarburst complexes. It contains well-known targets such as Aquila, the Cygnus X region, M16, M17, NGC7538, NGC6334, Vela, and W43 as well as a selection of HII region bubbles, namely RCW49, RCW79, and RCW120. These CII maps, together with the less explored OI 63 $μ$m line, provide an outstanding database for the community. They will be made publically available and will trigger further studies and follow-up observations.
△ Less
Submitted 18 September, 2020;
originally announced September 2020.
-
Motion Optimization for Musculoskeletal Dynamics: A Flatness-Based Polynomial Approach
Authors:
Hanz Richter,
Holly Warner
Abstract:
A new approach for trajectory optimization of musculoskeletal dynamic models is introduced. The model combines rigid body and muscle dynamics described with a Hill-type model driven by neural control inputs. The objective is to find input and state trajectories which are optimal with respect to a minimum-effort objective and meet constraints associated with musculoskeletal models. The measure of e…
▽ More
A new approach for trajectory optimization of musculoskeletal dynamic models is introduced. The model combines rigid body and muscle dynamics described with a Hill-type model driven by neural control inputs. The objective is to find input and state trajectories which are optimal with respect to a minimum-effort objective and meet constraints associated with musculoskeletal models. The measure of effort is given by the integral of pairwise average forces of the agonist-antagonist muscles. The concepts of flat parameterization of nonlinear systems and sum-of-squares optimization are combined to yield a method that eliminates the numerous set of dynamic constraints present in collocation methods. With terminal equilibrium, optimization reduces to a feasible linear program, and a recursive feasibility proof is given for more general polynomial optimization cases. The methods of the paper can be used as a basis for fast and efficient solvers for hierarchical and receding-horizon control schemes. Two simulation examples are included to illustrate the proposed methods
△ Less
Submitted 12 August, 2020;
originally announced August 2020.
-
Constructing transient amplifiers for death-Birth updating: A case study of cubic and quartic regular graphs
Authors:
Hendrik Richter
Abstract:
A central question of evolutionary dynamics on graphs is whether or not a mutation introduced in a population of residents survives and eventually even spreads to the whole population, or gets extinct. The outcome naturally depends on the fitness of the mutant and the rules by which mutants and residents may propagate on the network, but arguably the most determining factor is the network structur…
▽ More
A central question of evolutionary dynamics on graphs is whether or not a mutation introduced in a population of residents survives and eventually even spreads to the whole population, or gets extinct. The outcome naturally depends on the fitness of the mutant and the rules by which mutants and residents may propagate on the network, but arguably the most determining factor is the network structure. Some structured networks are transient amplifiers. They increase for a certain fitness range the fixation probability of beneficial mutations as compared to a well-mixed population. We study a perturbation methods for identifying transient amplifiers for death-Birth updating. The method includes calculating the coalescence times of random walks on graphs and finding the vertex with the largest remeeting time. If the graph is perturbed by removing an edge from this vertex, there is a certain likelihood that the resulting perturbed graph is a transient amplifier. We test all pairwise nonisomorphic cubic and quartic regular graphs up to a certain size and thus cover the whole structural range expressible by these graphs. We carry out a spectral analysis and show that the graphs from which the transient amplifiers can be constructed share certain structural properties. The graphs are path-like, have low conductance and are rather easy to divide into subgraphs by removing edges and/or vertices. This is connected with the subgraphs being identical (or almost identical) building blocks and the frequent occurrence of cut and/or hinge vertices. Identifying spectral and structural properties may promote finding and designing such networks.
△ Less
Submitted 4 August, 2020;
originally announced August 2020.
-
Backstep** Control of Muscle Driven Systems with Redundancy Resolution
Authors:
Humberto De las Casas,
Hanz Richter
Abstract:
Due to the several applications on Human-machine interaction (HMI), this area of research has become one of the most popular in recent years. This is the case for instance of advanced training machines, robots for rehabilitation, robotic surgeries and prosthesis. In order to ensure desirable performances, simulations are recommended before real-time experiments. These simulations have not been a p…
▽ More
Due to the several applications on Human-machine interaction (HMI), this area of research has become one of the most popular in recent years. This is the case for instance of advanced training machines, robots for rehabilitation, robotic surgeries and prosthesis. In order to ensure desirable performances, simulations are recommended before real-time experiments. These simulations have not been a problem in HMI on the side of the machine. However, the lack of controllers for human dynamic models suggests the existence of a gap for performing simulations for the human side. This paper offers to fulfill the previous gap by introducing a novel method based on a feedback controller for the dynamics of muscle-driven systems. The approach has been developed for trajectory tracking of systems with redundancy muscle resolution. To illustrate the validation of the method, a shoulder model actuated by a group of eight linkages, eight muscles and three degrees of freedom was used. The controller objective is to move the arm from a static position to another one through muscular activation. The results on this paper show the achievement of the arm movement, musculoskeletal dynamics and muscle activations.
△ Less
Submitted 1 June, 2020;
originally announced June 2020.
-
Convergence analysis of particle swarm optimization using stochastic Lyapunov functions and quantifier elimination
Authors:
Maximilian Gerwien,
Rick Voßwinkel,
Hendrik Richter
Abstract:
This paper adds to the discussion about theoretical aspects of particle swarm stability by proposing to employ stochastic Lyapunov functions and to determine the convergence set by quantifier elimination. We present a computational procedure and show that this approach leads to reevaluation and extension of previously know stability regions for PSO using a Lyapunov approach under stagnation assump…
▽ More
This paper adds to the discussion about theoretical aspects of particle swarm stability by proposing to employ stochastic Lyapunov functions and to determine the convergence set by quantifier elimination. We present a computational procedure and show that this approach leads to reevaluation and extension of previously know stability regions for PSO using a Lyapunov approach under stagnation assumptions.
△ Less
Submitted 5 February, 2020;
originally announced February 2020.
-
Evolution of Cooperation for Multiple Mutant Configurations on All Regular Graphs with $N \leq 14$ players
Authors:
Hendrik Richter
Abstract:
We study the emergence of cooperation in structured populations with any arrangement of cooperators and defectors on the evolutionary graph. Using structure coefficients defined for configurations describing such arrangements of any number of mutants, we provide results for weak selection to favor cooperation over defection on any regular graph with $N \leq 14$ vertices. Furthermore, the propertie…
▽ More
We study the emergence of cooperation in structured populations with any arrangement of cooperators and defectors on the evolutionary graph. Using structure coefficients defined for configurations describing such arrangements of any number of mutants, we provide results for weak selection to favor cooperation over defection on any regular graph with $N \leq 14$ vertices. Furthermore, the properties of graphs that particularly promote cooperation are analyzed. It is shown that the number of graph cycles of certain length is a good predictor for the values of the structure coefficient, and thus a tendency to favor cooperation. Another property of particularly cooperation-promoting regular graphs with a low degree is that they are structured to have blocks with clusters of mutants that are connected by cut vertices and/or hinge vertices.
△ Less
Submitted 9 November, 2019;
originally announced November 2019.
-
Analyzing symmetry and symmetry breaking by computational aesthetic measures
Authors:
Hendrik Richter
Abstract:
We study creating and analyzing symmetry and broken symmetry in digital art. Our focus is not so much on computer-generating artistic images, but rather on analyzing concepts and templates for incorporating symmetry and symmetry breaking into the creation process. Taking as a starting point patterns generated algorithmically by emulating the collective feeding behavior of sand-bubbler crabs, all f…
▽ More
We study creating and analyzing symmetry and broken symmetry in digital art. Our focus is not so much on computer-generating artistic images, but rather on analyzing concepts and templates for incorporating symmetry and symmetry breaking into the creation process. Taking as a starting point patterns generated algorithmically by emulating the collective feeding behavior of sand-bubbler crabs, all four types of two-dimensional symmetry are used as isometric maps. Apart from a geometric interpretation of symmetry, we also consider color as an object of symmetric transformations. Color symmetry is realized as a color permutation consistent with the isometries. Moreover, we analyze the abilities of computational aesthetic measures to serve as a metric that reflects design parameters, i.e. the type of symmetry and the degree of symmetry breaking.
△ Less
Submitted 15 October, 2019;
originally announced October 2019.
-
Unveiling dynamic changes in the diurnal microclimate of a Buxus sempervirens with non-intrusive imaging of flow field, leaf temperature, and plant microstructure
Authors:
Lento Manickathan,
Thijs Defraeye,
Stephan Carl,
Henning Richter,
Jonas Allegrini,
Dominique Derome,
Jan Carmeliet
Abstract:
Plant response is not only dependent on the atmospheric evaporative demand due to the combined effects of wind speed, air temperature, humidity, and solar radiation, but is also dependent on the water transport within the leaf-xylem-root system. Therefore, a detailed understanding of such dynamics is key to the development of appropriate mitigation strategies and numerical models. In this study, w…
▽ More
Plant response is not only dependent on the atmospheric evaporative demand due to the combined effects of wind speed, air temperature, humidity, and solar radiation, but is also dependent on the water transport within the leaf-xylem-root system. Therefore, a detailed understanding of such dynamics is key to the development of appropriate mitigation strategies and numerical models. In this study, we unveil the diurnal dynamics of the microclimate of a Buxus sempervirens plant using multiple high-resolution non-intrusive imaging techniques. The wake flow field is measured using stereoscopic particle image velocimetry, the spatiotemporal leaf temperature history is obtained using infrared thermography, and additionally, the plant porosity is obtained using X-ray tomography. We find that the wake velocity statistics is not directly linked with the distribution of the porosity but depends mainly on the geometry of the plant foliage which generates the shear flow. The interaction between the shear regions and the upstream boundary layer profile is seen to have a dominant effect on the wake turbulent kinetic energy distribution. Furthermore, the leaf area density distribution has a direct impact on the short-wave radiative heat flux absorption inside the foliage where 50% of the radiation is absorbed in the top 20% of the foliage. This localized radiation absorption results in a high local leaf and air temperature. Furthermore, a comparison of the diurnal variation of leaf temperature and the net plant transpiration rate enabled us to quantify the diurnal hysteresis resulting from the stomatal response lag. The day of this plant is seen to comprise of four stages of climatic conditions: no-cooling, high-cooling, equilibrium, and decaying-cooling stages.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Relationships between dilemma strength and fixation properties in coevolutionary games
Authors:
Hendrik Richter
Abstract:
Whether or not cooperation is favored over defection in evolutionary games can be assigned by structure coefficients for any arrangement of cooperators and defectors on any network modeled as a regular graph. We study how these structure coefficients relate to a scaling of dilemma strength in social dilemma games. It is shown that some graphs permit certain arrangements of cooperators and defector…
▽ More
Whether or not cooperation is favored over defection in evolutionary games can be assigned by structure coefficients for any arrangement of cooperators and defectors on any network modeled as a regular graph. We study how these structure coefficients relate to a scaling of dilemma strength in social dilemma games. It is shown that some graphs permit certain arrangements of cooperators and defectors to possess particularly large structure coefficients. Moreover, these large coefficients imply particularly large sections of a bounded parameter plane spanned by scaling gamble-intending and risk-averting dilemma strength.
△ Less
Submitted 13 May, 2019; v1 submitted 11 January, 2019;
originally announced January 2019.
-
The upGREAT dual frequency heterodyne arrays for SOFIA
Authors:
C. Risacher,
R. Güsten,
J. Stutzk,
H. -W. Hübers,
R. Aladro,
A. Bell,
C. Buchbender,
D. Büchel,
T. Csengeri,
C. Duran,
U. U. Graf,
R. D. Higgins,
C. E. Honingh,
K. Jacobs,
M. Justen,
B. Klein,
M. Mertens,
Y. Okada,
A. Parikka,
P. Pütz,
N. Reyes,
H. Richter,
O. Ricken,
D. Riquelme,
N. Rothbart
, et al. (8 additional authors not shown)
Abstract:
We present the performance of the upGREAT heterodyne array receivers on the SOFIA telescope after several years of operations. This instrument is a multi-pixel high resolution (R > 10^7) spectrometer for the Stratospheric Observatory for Far-Infrared Astronomy (SOFIA). The receivers use 7-pixel subarrays configured in a hexagonal layout around a central pixel. The low frequency array receiver (LFA…
▽ More
We present the performance of the upGREAT heterodyne array receivers on the SOFIA telescope after several years of operations. This instrument is a multi-pixel high resolution (R > 10^7) spectrometer for the Stratospheric Observatory for Far-Infrared Astronomy (SOFIA). The receivers use 7-pixel subarrays configured in a hexagonal layout around a central pixel. The low frequency array receiver (LFA) has 2x7 pixels (dual polarization), and presently covers the 1.83-2.06 THz frequency range, which allows to observe the [CII] and [OI] lines at 158 um and 145 um wavelengths. The high frequency array (HFA) covers the [OI] line at 63 um and is equipped with one polarization at the moment (7 pixels, which can be upgraded in the near future with a second polarization array). The 4.7 THz array has successfully flown using two separate quantum-cascade laser local oscillators from two different groups. NASA completed the development, integration and testing of a dual-channel closed-cycle cryocooler system, with two independently operable He compressors, aboard SOFIA in early 2017 and since then, both arrays can be operated in parallel using a frequency separating dichroic mirror. This configuration is now the prime GREAT configuration and has been added to SOFIA's instrument suite since observing cycle 6.
△ Less
Submitted 18 December, 2018;
originally announced December 2018.
-
Fixation properties of multiple cooperator configurations on regular graphs
Authors:
Hendrik Richter
Abstract:
Whether or not cooperation is favored in evolutionary games on graphs depends on the population structure and spatial properties of the interaction network. Population structures can be expressed as configurations. Such configurations extend scenarios with a single cooperator among defectors to any number of cooperators and any arrangement of cooperators and defectors. Thus, as a single cooperator…
▽ More
Whether or not cooperation is favored in evolutionary games on graphs depends on the population structure and spatial properties of the interaction network. Population structures can be expressed as configurations. Such configurations extend scenarios with a single cooperator among defectors to any number of cooperators and any arrangement of cooperators and defectors. Thus, as a single cooperator can be interpreted as a lone mutant, the discussion about fixation properties based on configurations also applies to multiple mutants. For interaction networks modeled as regular graphs and for weak selection, the emergence of cooperation can be assessed by structure coefficients, which are specific for a configuration and a graph. We analyze these structure coefficients and particularly show that under certain conditions the coefficients strongly correlate to the average shortest path length between cooperators on the evolutionary graph. Thus,for multiple cooperators fixation properties on regular evolutionary graphs can be linked to cooperator path length.
△ Less
Submitted 20 March, 2019; v1 submitted 16 November, 2018;
originally announced November 2018.
-
Velocity resolved [O I] 63 $μ$m emission in the HD 50138 circumstellar disk
Authors:
G. Sandell,
C. Salyk,
M. van den Ancker,
W. -J. de Wit,
E. Chambers,
R. Güsten,
H. Wiesemeyer,
H. Richter
Abstract:
HH 50138 is one of the brightest B[e] stars at a distance of $\sim$ 380 pc
with strong infrared excess. The star was observed in [O I] 63 $μ$m and [C II] 158 $μ$m with high velocity resolution with upGREAT on SOFIA. The velocity resolved [O I] emission provides evidence for a large gas-disk, $\sim$ 760 au in size, around HD 50138. Whereas previous interferometric observations give strong evidence…
▽ More
HH 50138 is one of the brightest B[e] stars at a distance of $\sim$ 380 pc
with strong infrared excess. The star was observed in [O I] 63 $μ$m and [C II] 158 $μ$m with high velocity resolution with upGREAT on SOFIA. The velocity resolved [O I] emission provides evidence for a large gas-disk, $\sim$ 760 au in size, around HD 50138. Whereas previous interferometric observations give strong evidence for a hot gas and dust disk in Keplerian rotation, our bservations are the first to provide unambiguous evidence for a large warm disk around the star. Herschel/PACS observations showed that the [C II] emission is extended, therefore the [C II] emission most likely originates in an ionized gas shell created by a past outflow event. We confirm the isolated nature of HD 50138. It is far from any star forming region and has low proper motion. Neither is there any sign of a remnant cloud from which it could have formed. The extended disk around the star appears carbon poor. It shows OH and [O I] emission, but no CO. The CO abundance appears to be at least an order of magnitude lower than that of OH. Furthermore $^{13}$CO is enriched by more than a factor of five, confirming that the star is not a Herbig Be star. Finally we note that our high spectral resolution [O I] and [C II] observations provide a very accurate heliocentric velocity of the star, 40.8 $\pm$ 0.2 km~s$^{-1}$.
△ Less
Submitted 25 July, 2018;
originally announced July 2018.
-
Anatomy of the massive star-forming region S106: The OI 63 micron line observed with GREAT/SOFIA as a versatile diagnostic tool for the evolution of massive stars
Authors:
N. Schneider,
M. Roellig,
R. Simon,
H. Wiesemeyer,
A. Gusdorf,
J. Stutzki,
R. Guesten,
S. Bontemps,
F. Comeron,
T. Csengeri,
J. D. Adams,
H. Richter
Abstract:
The central area (40"x40") of the bipolar nebula S106 was mapped in the OI line at 63.2 micron with high angular (6") and spectral resolution, using GREAT on board SOFIA. The OI emission distribution is compared to the CO 16-15, CII 158 micron, and CO 11-10 lines, mm-molecular lines, and continuum. It is composed of several velocity components in the range from -30 km/s to 25 km/s. The high-veloci…
▽ More
The central area (40"x40") of the bipolar nebula S106 was mapped in the OI line at 63.2 micron with high angular (6") and spectral resolution, using GREAT on board SOFIA. The OI emission distribution is compared to the CO 16-15, CII 158 micron, and CO 11-10 lines, mm-molecular lines, and continuum. It is composed of several velocity components in the range from -30 km/s to 25 km/s. The high-velocity blue- and redshifted emission can be explained as arising from accelerated photodissociated (PDR) gas associated with a dark lane close to the massive binary system S106 IR, and from shocks caused by the stellar wind and/or a disk--envelope interaction. At velocities from -9 to -4 km/s and 0.5 to 8 km/s line wings are observed that we attribute to cooling in PDRs created by the ionizing radiation im**ing on the cavity walls. The bulk velocity range is dominated by PDR emission from the clumpy molecular cloud. Modelling the emission in the different velocity ranges with the KOSMA-tau code constrains a radiation field chi of a few times 10^4 and densities n of a few times 10^4 cm^-3. Considering self-absorption of the OI line results in higher densities (up to 10^6 cm^-3) only for the gas component seen at high blue- and red velocities. The dark lane has a mass of 275 Msun and shows a velocity difference of 1.4 km/s along its projected length of 1 pc, determined from H13CO+ 1-0 map**. It can be interpreted as a massive accretion flow, or the remains of it, linked to S106 IR/FIR. The most likely explanation is that the binary system is at a stage of its evolution where gas accretion is counteracted by the stellar winds and radiation, leading to the very complex observed spatial and kinematic emission distribution of the various tracers.
△ Less
Submitted 4 June, 2018;
originally announced June 2018.
-
Properties of interaction networks, structure coefficients, and benefit-to-cost ratios
Authors:
Hendrik Richter
Abstract:
In structured populations the spatial arrangement of cooperators and defectors on the interaction graph together with the structure of the graph itself determines the game dynamics and particularly whether or not fixation of cooperation (or defection) is favored. For a single cooperator (and a single defector) and a network described by a regular graph the question of fixation can be addressed by…
▽ More
In structured populations the spatial arrangement of cooperators and defectors on the interaction graph together with the structure of the graph itself determines the game dynamics and particularly whether or not fixation of cooperation (or defection) is favored. For a single cooperator (and a single defector) and a network described by a regular graph the question of fixation can be addressed by a single parameter, the structure coefficient. As this quantity is generic for any regular graph, we may call it the generic structure coefficient. For two and more cooperators (or several defectors) fixation properties can also be assigned by structure coefficients. These structure coefficients, however, depend on the arrangement of cooperators and defectors which we may interpret as a configuration of the game. Moreover, the coefficients are specific for a given interaction network modeled as regular graph, which is why we may call them specific structure coefficients. In this paper, we study how specific structure coefficients vary over interaction graphs and link the distributions obtained over different graphs to spectral properties of interaction networks. We also discuss implications for the benefit-to-cost ratios of donation games.
△ Less
Submitted 6 June, 2018; v1 submitted 29 May, 2018;
originally announced May 2018.
-
Trajectory Optimization of Robots with Regenerative Drive Systems: Numerical and Experimental Results
Authors:
Poya Khalaf,
Hanz Richter
Abstract:
We investigate energy-optimal control of robots with ultracapacitor based regenerative drive systems. Based on a previously introduced framework, a fairly generic model is considered for the robot and the drive system. An optimal control problem is formulated to find point-to point trajectories maximizing the amount of energy regenerated and stored in the capacitor. The optimization problem, its n…
▽ More
We investigate energy-optimal control of robots with ultracapacitor based regenerative drive systems. Based on a previously introduced framework, a fairly generic model is considered for the robot and the drive system. An optimal control problem is formulated to find point-to point trajectories maximizing the amount of energy regenerated and stored in the capacitor. The optimization problem, its numerical solution and an experimental evaluation are demonstrated using a PUMA 560 manipulator. A comprehensive experimental setup was prepared to evaluate power flows and energy regeneration. Tracking of optimal trajectories was enforced on the robot using a standard robust passivity based control approach. Experimental results show that when following optimal trajectories, a reduction of about 13\% in energy consumption can be achieved for the conditions of the study.
△ Less
Submitted 1 April, 2018;
originally announced April 2018.
-
Information content of coevolutionary game landscapes
Authors:
Hendrik Richter
Abstract:
Coevolutionary game dynamics is the result of players that may change their strategies and their network of interaction. For such games, and based on interpreting strategies as configurations, strategy-to-payoff maps can be defined for every interaction network, which opens up to derive game landscapes. This paper presents an analysis of these game landscapes by their information content. By this…
▽ More
Coevolutionary game dynamics is the result of players that may change their strategies and their network of interaction. For such games, and based on interpreting strategies as configurations, strategy-to-payoff maps can be defined for every interaction network, which opens up to derive game landscapes. This paper presents an analysis of these game landscapes by their information content. By this analysis, we particularly study the effect of a rescaled payoff matrix generalizing social dilemmas and differences between well-mixed and structured populations.
△ Less
Submitted 20 March, 2018;
originally announced March 2018.
-
Automatic Generation of Bounds for Polynomial Systems with Application to the Lorenz System
Authors:
Klaus Röbenack,
Rick Voßwinkel,
Hendrik Richter
Abstract:
This study covers an analytical approach to calculate positively invariant sets of dynamical systems. Using Lyapunov techniques and quantifier elimination methods, an automatic procedure for determining bounds in the state space as an enclosure of attractors is proposed. The available software tools permit an algorithmizable process, which normally requires a good insight into the systems dynamics…
▽ More
This study covers an analytical approach to calculate positively invariant sets of dynamical systems. Using Lyapunov techniques and quantifier elimination methods, an automatic procedure for determining bounds in the state space as an enclosure of attractors is proposed. The available software tools permit an algorithmizable process, which normally requires a good insight into the systems dynamics and experience. As a result we get an estimation of the attractor, whose conservatism only results from the initial choice of the Lyapunov candidate function. The proposed approach is illustrated on the well-known Lorenz system.
△ Less
Submitted 6 June, 2018; v1 submitted 21 December, 2017;
originally announced December 2017.
-
State Estimation For An Agonistic-Antagonistic Muscle System
Authors:
Thang Nguyen,
Holly Warner,
Hung La,
Hanieh Mohammadi,
Dan Simon,
Hanz Richter
Abstract:
Research on assistive technology, rehabilitation, and prosthesis requires the understanding of human machine interaction, in which human muscular properties play a pivotal role. This paper studies a nonlinear agonistic-antagonistic muscle system based on the Hill muscle model. To investigate the characteristics of the muscle model, the problem of estimating the state variables and activation signa…
▽ More
Research on assistive technology, rehabilitation, and prosthesis requires the understanding of human machine interaction, in which human muscular properties play a pivotal role. This paper studies a nonlinear agonistic-antagonistic muscle system based on the Hill muscle model. To investigate the characteristics of the muscle model, the problem of estimating the state variables and activation signals of the dual muscle system is considered. In this work, parameter uncertainty and unknown inputs are taken into account for the estimation problem. Three observers are presented: a high gain observer, a sliding mode observer, and an adaptive sliding mode observer. Theoretical analysis shows the convergence of the three observers. To facilitate numerical simulations, a backstep** controller is employed to drive the muscle system to track a desired trajectory. Numerical simulations reveal that the three observers are comparable and provide reliable estimates in noise free and noisy cases. The proposed schemes may serve as frameworks for estimation of complex multi-muscle systems, which could lead to intelligent exercise machines for adaptive training and rehabilitation, and adaptive prosthetics and exoskeletons.
△ Less
Submitted 1 December, 2017;
originally announced December 2017.
-
Visual art inspired by the collective feeding behavior of sand-bubbler crabs
Authors:
Hendrik Richter
Abstract:
Sand--bubblers are crabs of the genera Dotilla and Scopimera which are known to produce remarkable patterns and structures at tropical beaches. From these pattern-making abilities, we may draw inspiration for digital visual art. A simple mathematical model is proposed and an algorithm is designed that may create such sand-bubbler patterns artificially. In addition, design parameters to modify the…
▽ More
Sand--bubblers are crabs of the genera Dotilla and Scopimera which are known to produce remarkable patterns and structures at tropical beaches. From these pattern-making abilities, we may draw inspiration for digital visual art. A simple mathematical model is proposed and an algorithm is designed that may create such sand-bubbler patterns artificially. In addition, design parameters to modify the patterns are identified and analyzed by computational aesthetic measures. Finally, an extension of the algorithm is discussed that may enable controlling and guiding generative evolution of the art-making process.
△ Less
Submitted 10 January, 2018; v1 submitted 1 September, 2017;
originally announced September 2017.
-
Monolithic Photoelectrochemical Device for 19% Direct Water Splitting
Authors:
Wen-Hui Cheng,
Matthias H. Richter,
Matthias M. May,
Jens Ohlmann,
David Lackner,
Frank Dimroth,
Thomas Hannappel,
Harry A. Atwater,
Hans-Joachim Lewerenz
Abstract:
Recent rapid progress in efficiencies for solar water splitting by photoelectrochemical devices has enhanced its prospects to enable storable renewable energy. Efficient solar fuel generators all use tandem photoelectrode structures, and advanced integrated devices incorporate corrosion protection layers as well as heterogeneous catalysts. Realization of near thermodynamic limiting performance req…
▽ More
Recent rapid progress in efficiencies for solar water splitting by photoelectrochemical devices has enhanced its prospects to enable storable renewable energy. Efficient solar fuel generators all use tandem photoelectrode structures, and advanced integrated devices incorporate corrosion protection layers as well as heterogeneous catalysts. Realization of near thermodynamic limiting performance requires tailoring the energy band structure of the photoelectrode and also the optical and electronic properties of the surface layers exposed to the electrolyte. Here, we report a monolithic device architecture that exhibits reduced surface reflectivity in conjunction with metallic Rh nanoparticle catalyst layers that minimize parasitic light absorption. Additionally, the anatase TiO2 protection layer on the photocathode creates a favorable internal band alignment for hydrogen evolution. An initial solar-to-hydrogen efficiency of 19.3 % is obtained in acidic electrolyte and an efficiency of 18.5 % is achieved at neutral pH condition (under simulated sunlight).
△ Less
Submitted 5 June, 2017;
originally announced June 2017.
-
Temperature Dependence of the Anisotropy Field of L10 FePt near the Curie Temperature
Authors:
H. J. Richter,
G. J. Parker
Abstract:
Near the Curie temperature the anisotropy field of magnetically uniaxial L10 FePt is expected to follow the scaling law $(1-T/Tc)^β$ where $T$ is the temperature and $T_c$ the Curie temperature. In the literature $β$ values between 0.36 and 0.65 have been reported. Based on recording measurements and micromagnetic analysis, we show that only the values of $β$ near the low end of the reported range…
▽ More
Near the Curie temperature the anisotropy field of magnetically uniaxial L10 FePt is expected to follow the scaling law $(1-T/Tc)^β$ where $T$ is the temperature and $T_c$ the Curie temperature. In the literature $β$ values between 0.36 and 0.65 have been reported. Based on recording measurements and micromagnetic analysis, we show that only the values of $β$ near the low end of the reported range are compatible with the data. We also conclude that thermally activated magnetization reversal at temperatures near $T_c$ cannot be ignored, even at time scales smaller than 1 ns. We demonstrate that thermally activated magnetization reversal at temperatures close to $T_c$ is well described by conventional theory with a frequency factor $f_0$ of the order of $10^{12}$ Hz. It is reasoned that the unusually high value for $f_0$ is a consequence of the temperature-induced reduction of the degree of alignment of the micro-spins within the grains.
△ Less
Submitted 31 March, 2017;
originally announced March 2017.
-
Scale-invariance of ruggedness measures in fractal fitness landscapes
Authors:
Hendrik Richter
Abstract:
The paper deals with using chaos to direct trajectories to targets and analyzes ruggedness and fractality of the resulting fitness landscapes. The targeting problem is formulated as a dynamic fitness landscape and four different chaotic maps generating such a landscape are studied. By using a computational approach, we analyze properties of the landscapes and quantify their fractal and rugged char…
▽ More
The paper deals with using chaos to direct trajectories to targets and analyzes ruggedness and fractality of the resulting fitness landscapes. The targeting problem is formulated as a dynamic fitness landscape and four different chaotic maps generating such a landscape are studied. By using a computational approach, we analyze properties of the landscapes and quantify their fractal and rugged characteristics. In particular, it is shown that ruggedness measures such as correlation length and information content are scale-invariant and self-similar.
△ Less
Submitted 11 April, 2017; v1 submitted 21 December, 2016;
originally announced December 2016.
-
Dynamic landscape models of coevolutionary games
Authors:
Hendrik Richter
Abstract:
Players of coevolutionary games may update not only their strategies but also their networks of interaction. Based on interpreting the payoff of players as fitness, dynamic landscape models are proposed. The modeling procedure is carried out for Prisoner's Dilemma (PD) and Snowdrift (SD) games that both use either birth--death (BD) or death--birth (DB) strategy updating. The main focus is on using…
▽ More
Players of coevolutionary games may update not only their strategies but also their networks of interaction. Based on interpreting the payoff of players as fitness, dynamic landscape models are proposed. The modeling procedure is carried out for Prisoner's Dilemma (PD) and Snowdrift (SD) games that both use either birth--death (BD) or death--birth (DB) strategy updating. The main focus is on using dynamic fitness landscapes as a mathematical model of coevolutionary game dynamics. Hence, an alternative tool for analyzing coevolutionary games becomes available, and landscape measures such as modality, ruggedness and information content can be computed and analyzed. In addition, fixation properties of the games and quantifiers characterizing the interaction networks are calculated numerically. Relations are established between landscape properties expressed by landscape measures and quantifiers of coevolutionary game dynamics such as fixation probabilities, fixation times and network properties.
△ Less
Submitted 15 March, 2017; v1 submitted 28 November, 2016;
originally announced November 2016.
-
Analyzing coevolutionary games with dynamic fitness landscapes
Authors:
Hendrik Richter
Abstract:
Coevolutionary games cast players that may change their strategies as well as their networks of interaction. In this paper a framework is introduced for describing coevolutionary game dynamics by landscape models. It is shown that coevolutionary games invoke dynamic landscapes. Numerical experiments are shown for a prisoner's dilemma (PD) and a snow drift (SD) game that both use either birth-death…
▽ More
Coevolutionary games cast players that may change their strategies as well as their networks of interaction. In this paper a framework is introduced for describing coevolutionary game dynamics by landscape models. It is shown that coevolutionary games invoke dynamic landscapes. Numerical experiments are shown for a prisoner's dilemma (PD) and a snow drift (SD) game that both use either birth-death (BD) or death-birth (DB) strategy updating. The resulting landscapes are analyzed with respect to modality and ruggedness
△ Less
Submitted 21 March, 2016;
originally announced March 2016.
-
Far-infrared study of tracers of oxygen chemistry in diffuse clouds
Authors:
H. Wiesemeyer,
R. Güsten,
S. Heyminck,
H. W. Hübers,
K. M. Menten,
D. A. Neufeld,
H. Richter,
R. Simon,
J. Stutzki,
B. Winkel,
F. Wyrowski
Abstract:
Context. The chemistry of the diffuse interstellar medium rests upon three pillars: exothermic ion-neutral reactions (" cold chemistry "), endothermic neutral-neutral reactions with significant activation barriers (" warm chemistry "), and reactions on the surfaces of dust grains. While warm chemistry becomes important in the shocks associated with turbulent dissipation regions, the main path for…
▽ More
Context. The chemistry of the diffuse interstellar medium rests upon three pillars: exothermic ion-neutral reactions (" cold chemistry "), endothermic neutral-neutral reactions with significant activation barriers (" warm chemistry "), and reactions on the surfaces of dust grains. While warm chemistry becomes important in the shocks associated with turbulent dissipation regions, the main path for the formation of interstellar OH and H2O is that of cold chemistry. Aims. The aim of this study is to observationally confirm the association of atomic oxygen with both atomic and molecular gas phases, and to understand the measured abundances of OH and OH + as a function of the available reservoir of H2. Methods. We obtained absorption spectra of the ground states of OH, OH+ and OI with high-velocity resolution, with GREAT on-board SOFIA, and with the THz receiver at the APEX. We analyzed them along with ancillary spectra of HF and CH from HIFI. To deconvolve them from the hyperfine structure and to separate the blend that is due to various velocity components on the sightline, we fit model spectra consisting of an appropriate number of Gaussian profiles using a method combining simulated annealing with downhill simplex minimization. Together with HF and/or CH as a surrogate for H2, and HI $λ$21 cm data, the molecular hydrogen fraction f^N\_H2 = N(H 2)/(N(H) + 2N(H 2)) can be determined. We then investigated abundance ratios as a function of f^N\_H2. Results. The column density of OI is correlated at a high significance with the amount of available molecular and atomic hydrogen, with an atomic oxygen abundance of $3 \times 10 ^{-4}$ relative to H nuclei. While the velocities of the absorption features of OH and OH+ are loosely correlated and reflect the spiral arm crossings on the sightline, upon closer inspection they display an anticorrespondence. The arm-to-interarm density contrast is found to be higher in OH than in OH+. While both species can coexist, with a higher abundance in OH than in OH+, the latter is found less frequently in absence of OH than the other way around, which is a direct consequence of the rapid destruction of OH+ by dissociative recombination when not enough H2 is available. This conjecture has been substantiated by a comparison between the OH/OH+ ratio with f^N\_H2, showing a clear correlation. The hydrogen abstraction reaction chain OH+ (H2,H) H2O+ (H2,H)H3O+ is confirmed as the pathway for the production of OH and H 2 O. Our estimate of the branching ratio of the dissociative recombination of H3O+ to OH and H2O is confined within the interval of 84 to 91%, which matches laboratory measurements (74 to 83%). -- A correlation between the linewidths and column densities of OH+ features is found to be significant with a false-alarm probability below 5%. Such a correlation is predicted by models of interstellar MHD turbulence. For OH the same correlation is found to be insignificant because there are more narrow absorption features. Conclusions. While it is difficult to assess the contributions of warm neutral-neutral chemistry to the observed abundances, it seems fair to conclude that the predictions of cold ion-neutral chemistry match the abundance patterns we observed.
△ Less
Submitted 10 February, 2016;
originally announced February 2016.
-
About the Suitability of Clouds in High-Performance Computing
Authors:
Harald Richter
Abstract:
Cloud computing has become the ubiquitous computing and storage paradigm. It is also attractive for scientists, because they do not have to care any more for their own IT infrastructure, but can outsource it to a Cloud Service Provider of their choice. However, for the case of High-Performance Computing (HPC) in a cloud, as it is needed in simulations or for Big Data analysis, things are getting m…
▽ More
Cloud computing has become the ubiquitous computing and storage paradigm. It is also attractive for scientists, because they do not have to care any more for their own IT infrastructure, but can outsource it to a Cloud Service Provider of their choice. However, for the case of High-Performance Computing (HPC) in a cloud, as it is needed in simulations or for Big Data analysis, things are getting more intricate, because HPC codes must stay highly efficient, even when executed by many virtual cores (vCPUs). Older clouds or new standard clouds can fulfil this only under special precautions, which are given in this article. The results can be extrapolated to other cloud OSes than OpenStack and to other codes than OpenFOAM, which were used as examples.
△ Less
Submitted 8 January, 2016;
originally announced January 2016.
-
Spectroscopically resolved far-IR observations of the massive star-forming region G5.89--0.39
Authors:
S. Leurini,
F. Wyrowski,
H. Wiesemeyer,
A. Gusdorf,
R. Guesten,
K. M. Menten,
M. Gerin,
F. Levrier,
H. W. Huebers,
K. Jacobs,
O. Ricken,
H. Richter
Abstract:
The fine-structure line of [OI] at 63micron is an important diagnostic tool in different fields of astrophysics. However, our knowledge of this line relies on observations with low spectral resolution, and the real contribution of each component (PDR, jet) in complex environment of star-forming regions (SFRs) is poorly understood. We investigate the contribution of jet and PDR emission, and of abs…
▽ More
The fine-structure line of [OI] at 63micron is an important diagnostic tool in different fields of astrophysics. However, our knowledge of this line relies on observations with low spectral resolution, and the real contribution of each component (PDR, jet) in complex environment of star-forming regions (SFRs) is poorly understood. We investigate the contribution of jet and PDR emission, and of absorption to the [OI]63micron line towards the ultra-compact H{\sc ii} region G5.89--0.39 and study its far-IR line luminosity in different velocity regimes through [OI], [CII], CO, OH, and H2O. We mapped G5.89--0.39 in [OI] and in CO(16--15) with the GREAT receiver onboard SOFIA. We observed the central position of the source in the OH^2Π_{3/2}, J=5/2\toJ=3/2 and ^2Π_{1/2}, J=3/2\toJ=1/2 lines. These data were complemented with APEX CO(6-5) and CO(7-6) and HIFI maps and single-pointing observations in [CII], H2O, and HF. The [OI] spectra in G5.89--0.39 are severely contaminated by absorptions from the envelope and from different clouds along the line of sight. Emission is detected only at HV, clearly associated with the compact north-south outflows traced by extremely HV low-J CO. The mass-loss rate and energetics of derived from [OI] agree well with estimates from CO, suggesting that the molecular outflows in G5.89--0.39 are driven by the jet system seen in [OI]. The far-IR line luminosity of G5.89--0.39 is dominated by [OI] at HV; the second coolant in this velocity regime is CO, while [CII], OH and H2O are minor contributors to the cooling in the outflow. Our study shows the importance of spectroscopically resolved data of [OI]63micron for using this line as diagnostic of SFRs. While this was not possible until now, the GREAT receiver onboard SOFIA has recently opened the possibility of detailed studies of this line to investigate its potential for probing different environments.
△ Less
Submitted 1 October, 2015;
originally announced October 2015.
-
Coevolutionary intransitivity in games: A landscape analysis
Authors:
Hendrik Richter
Abstract:
Intransitivity is supposed to be a main reason for deficits in coevolutionary progress and inheritable superiority. Besides, coevolutionary dynamics is characterized by interactions yielding subjective fitness, but aiming at solutions that are superior with respect to an objective measurement. Such an approximation of objective fitness may be, for instance, generalization performance. In the paper…
▽ More
Intransitivity is supposed to be a main reason for deficits in coevolutionary progress and inheritable superiority. Besides, coevolutionary dynamics is characterized by interactions yielding subjective fitness, but aiming at solutions that are superior with respect to an objective measurement. Such an approximation of objective fitness may be, for instance, generalization performance. In the paper a link between rating-- and ranking--based measures of intransitivity and fitness landscapes that can address the dichotomy between subjective and objective fitness is explored. The approach is illustrated by numerical experiments involving a simple random game with continuously tunable degree of randomness.
△ Less
Submitted 16 January, 2015;
originally announced January 2015.