Showing 1–8 of 8 results for author: Reza, S A

Phasor field waves: A statistical treatment for the case of a partially coherent optical carrier

Authors: Syed Azer Reza, Sebastian Bauer, Andreas Velten

Abstract: This paper presents a statistical treatment of phasor fields (P-fields) - a wave-like quantity denoting the slow temporal variations in time-averaged irradiance (which was recently introduced to model and describe non-line-of-sight (NLoS) imaging as well as imaging through diffuse or scattering apertures) - and quantifies the magnitude of a spurious signal which emerges due to a partial spatial co… ▽ More This paper presents a statistical treatment of phasor fields (P-fields) - a wave-like quantity denoting the slow temporal variations in time-averaged irradiance (which was recently introduced to model and describe non-line-of-sight (NLoS) imaging as well as imaging through diffuse or scattering apertures) - and quantifies the magnitude of a spurious signal which emerges due to a partial spatial coherence of the underlying optical carrier. This spurious signal is not described by the Huygens-like P-field imaging integral which assumes optical incoherence as a necessary condition to describe P-field imaging completely (as was shown by Reza etal. recently). In this paper, we estimate the relationship between the expected magnitude of this spurious signal and the degree of partial roughness within the P-field imaging system. The treatment allows us to determine the accuracy of the estimate provided by the P-field integral for varying degrees of partial coherence and allows to define a P-field signal-to-noise ratio as a figure-of-merit for the case of a partially coherent optical carrier. The study of partial coherence also enables to better relate aperture roughness to P-field noise. △ Less

Submitted 18 September, 2020; v1 submitted 3 June, 2020; originally announced June 2020.

Comments: The model proposed has various deficiencies which need more work to address

Wave-like Properties of Phasor Fields: Experimental Demonstrations

Authors: Syed Azer Reza, Marco La Manna, Sebastian Bauer, Andreas Velten

Abstract: Recently, an optical meta concept called the Phasor Field (P-Field) was proposed that yields great quality in the reconstruction of hidden objects imaged by non-line-of-sight (NLOS) imaging. It is based on virtual sinusoidal modulation of the light with frequencies in the MHz range. Phasor Field propagation was shown to be described by the Rayleigh-Sommerfeld diffraction integral. We extend this c… ▽ More Recently, an optical meta concept called the Phasor Field (P-Field) was proposed that yields great quality in the reconstruction of hidden objects imaged by non-line-of-sight (NLOS) imaging. It is based on virtual sinusoidal modulation of the light with frequencies in the MHz range. Phasor Field propagation was shown to be described by the Rayleigh-Sommerfeld diffraction integral. We extend this concept and stress the analogy between electric field and Phasor Field. We introduce Phasor Field optical elements and present experiments demonstrating the validity of the approach. Straightforward use of the Phasor Field concept in real-world applications is also discussed. △ Less

Submitted 2 April, 2019; originally announced April 2019.

Comments: 17 pages, 10 figures

Virtual Wave Optics for Non-Line-of-Sight Imaging

Authors: Xiaochun Liu, Ibón Guillén, Marco La Manna, Ji Hyun Nam, Syed Azer Reza, Toan Huu Le, Diego Gutierrez, Adrian Jarabo, Andreas Velten

Abstract: Non-Line-of-Sight (NLOS) imaging allows to observe objects partially or fully occluded from direct view, by analyzing indirect diffuse reflections off a secondary, relay surface. Despite its many potential applications, existing methods lack practical usability due to several shared limitations, including the assumption of single scattering only, lack of occlusions, and Lambertian reflectance. We… ▽ More Non-Line-of-Sight (NLOS) imaging allows to observe objects partially or fully occluded from direct view, by analyzing indirect diffuse reflections off a secondary, relay surface. Despite its many potential applications, existing methods lack practical usability due to several shared limitations, including the assumption of single scattering only, lack of occlusions, and Lambertian reflectance. We lift these limitations by transforming the NLOS problem into a virtual Line-Of-Sight (LOS) one. Since imaging information cannot be recovered from the irradiance arriving at the relay surface, we introduce the concept of the phasor field, a mathematical construct representing a fast variation in irradiance. We show that NLOS light transport can be modeled as the propagation of a phasor field wave, which can be solved accurately by the Rayleigh-Sommerfeld diffraction integral. We demonstrate for the first time NLOS reconstruction of complex scenes with strong multiply scattered and ambient light, arbitrary materials, large depth range, and occlusions. Our method handles these challenging cases without explicitly develo** a light transport model. By leveraging existing fast algorithms, we outperform existing methods in terms of execution speed, computational complexity, and memory use. We believe that our approach will help unlock the potential of NLOS imaging, and the development of novel applications not restricted to lab conditions. For example, we demonstrate both refocusing and transient NLOS videos of real-world, complex scenes with large depth. △ Less

Submitted 6 August, 2019; v1 submitted 17 October, 2018; originally announced October 2018.

Comments: 19 pages, 6 figures

A Physical Light Transport Model for Non-Line-of-Sight Imaging Applications

Authors: Syed Azer Reza, Marco La Manna, Andreas Velten

Abstract: Non-line-of-sight (NLOS) imaging has recently attracted a lot of interest from the scientific community. The goal of this paper is to provide the basis for a comprehensive mathematical framework for NLOS imaging that is directly derived from physical concepts. We introduce the irradiance phasor field (P-field) as an abstract quantity for irradiance fluctuations, akin to the complex envelope of the… ▽ More Non-line-of-sight (NLOS) imaging has recently attracted a lot of interest from the scientific community. The goal of this paper is to provide the basis for a comprehensive mathematical framework for NLOS imaging that is directly derived from physical concepts. We introduce the irradiance phasor field (P-field) as an abstract quantity for irradiance fluctuations, akin to the complex envelope of the Electrical field (E-field) that is used to describe propagation of electromagnetic energy. We demonstrate that the P-field propagator is analogous to the Huygens-Fresnel propagator that describes the propagation of other waves and show that NLOS light transport can be described with the processing methods that are available for LOS imaging. We perform simulations to demonstrate the accuracy and validity of the P-field formulation and provide experimental results to demonstrate a Huygens-like P-field summation behavior. △ Less

Submitted 1 June, 2020; v1 submitted 6 February, 2018; originally announced February 2018.

Journal ref: Optics express 27, no. 20 (2019): 29380-29400

High efficiency measurement of all orbital angular momentum modes in a light beam

Authors: Haad Yaqub Rathore, Mumtaz Sheikh, Usman Javid, Hamza Ahmed, Syed Azer Reza

Abstract: We present an experimental demonstration of a Laguerre-Gauss (LG) spectrum measurement technique using variable focus lenses that is able to measure the strengths of all modes present in an unknown, incoming light beam with the highest possible efficiency. The experiment modifies the classical projective, phase flattening technique by including a variable sized pinhole and a two electronic lens va… ▽ More We present an experimental demonstration of a Laguerre-Gauss (LG) spectrum measurement technique using variable focus lenses that is able to measure the strengths of all modes present in an unknown, incoming light beam with the highest possible efficiency. The experiment modifies the classical projective, phase flattening technique by including a variable sized pinhole and a two electronic lens variable imaging system that is tuned for each mode to give the highest possible detection efficiency irrespective of the beam waist of LG mode chosen for the projection/decomposition. The modified experiment preserves the orthogonality between the modes with only a 4 \% cross-talk so that superposition states may also be detected efficiently. Our experiment results show efficient detection of OAM vortex beams with topological charge, $l$, values ranging from 0 to 4 with various different beam waists chosen for the decomposition. △ Less

Submitted 10 January, 2017; v1 submitted 21 November, 2016; originally announced November 2016.

Comments: 6 pages, 11 figures

Power Transmittance of a Laterally Shifted Gaussian Beam through a Circular Aperture

Authors: Tariq Shamim Khwaja, Syed Azer Reza

Abstract: Gaussian beams are often used in optical systems. The fundamental Gaussian TEM00 mode is the most common of the Gaussian modes present in various optical devices, systems and equipment. Within an optical system, it is common that this Gaussian TEM00 beam passes through a circular aperture of a finite diameter. Such circular apertures include irises, spatial filters, circular Photo-Detectors (PDs)… ▽ More Gaussian beams are often used in optical systems. The fundamental Gaussian TEM00 mode is the most common of the Gaussian modes present in various optical devices, systems and equipment. Within an optical system, it is common that this Gaussian TEM00 beam passes through a circular aperture of a finite diameter. Such circular apertures include irises, spatial filters, circular Photo-Detectors (PDs) and optical mounts with circular rims. The magnitude of optical power passing through a finite-sized circular aperture is well-documented for cases where the Gaussian beam passes through the center of the clear circular aperture, and is chopped off symmetrically in all radial directions on a given plane. More often than not, a non-axial incident Gaussian Beam is not blocked in a radially uniform manner by a circular aperture. Such situations arise due to a lateral displacement of the beam from tilted glass blocks, manufacturing errors and imperfect surface flatness or parallelness of surfaces. The fraction of optical power of a laterally-shifted Gaussian Beam passing through a circular aperture is calculated in this paper through conventional integration techniques. △ Less

Submitted 8 May, 2016; originally announced May 2016.

Comments: 8 Pages, 1 Figure, 21 Equations

Calculation of Beam Propagation through a Defected or a Misaligned Two-Lens System

Authors: Tariq Shamim Khwaja, Syed Azer Reza

Abstract: An inadvertent or unwanted angular deviation to a passing beam can be introduced by any single optical component within an optical system. The problem arises due to an imperfect tilt alignment of the optical component or manufacturing defects which results in a slightly different response than expected from an ideally aligned/manufactured component. The resulting beam deviation can plague any well… ▽ More An inadvertent or unwanted angular deviation to a passing beam can be introduced by any single optical component within an optical system. The problem arises due to an imperfect tilt alignment of the optical component or manufacturing defects which results in a slightly different response than expected from an ideally aligned/manufactured component. The resulting beam deviation can plague any well-designed optical system that assumes the use of ideal components. The problem is especially introduced by non-ideal lenses, transparent plates and optical windows. Here we present a simple method of manually introducing a deviation error angle which we assume to be constant for all beam incidence angles over the paraxial range. △ Less

Submitted 8 May, 2016; originally announced May 2016.

Comments: 6 Pages, 2 Figures

A Technique to Measure Focal Length of a Lens with no Bulk Motion using Tunable Optics and Optical MEMS Technology

Authors: Syed Azer Reza, Arslan Anjum

Abstract: This paper presents a motion-free technique for characterizing the focal length of any spherical convex or concave lens. The measurement system uses a Gaussian Beam from a Laser Source (LS), an Electronically Controlled Variable Focus Lens (ECVFL), a Digital Micromirror Device (DMD) and a Photo-Detector (PD). As the proposed method does not involve any motion-stages or other moving components, the… ▽ More This paper presents a motion-free technique for characterizing the focal length of any spherical convex or concave lens. The measurement system uses a Gaussian Beam from a Laser Source (LS), an Electronically Controlled Variable Focus Lens (ECVFL), a Digital Micromirror Device (DMD) and a Photo-Detector (PD). As the proposed method does not involve any motion-stages or other moving components, the focal length is measured without requiring any mechanical motion of bulk components. The method requires measuring the spot size of the Gaussian Beam at the DMD plane for various settings of the ECVFL focal length. These beam spot size measurements, are used to estimate the focal length of a lens sample by employing standard polynomial-fitting techniques. Due to the inherent motion-free nature of the proposed setup, the measurements are fast, repeatable, reliable and ideal for use in industrial lens production, manufacturing of imaging systems and sensitive laboratory experiments. Using a DMD and an ECVFL also allows for automating the lens characterization process. As a proof-of-concept, experiments were performed to determine focal length values of multiple lens samples with the proposed technique. The values of focal lengths of all samples are in agreement with the focal length values which were provided by the manufacturer of these test lenses. The estimated focal length values are within the 1% manufacturing tolerance values that were provided. △ Less

Submitted 16 January, 2016; originally announced January 2016.

Comments: 23 pages, 4 figures, 3 tables, unpublished