-
Growth of membranes formed by associating polymers at interfaces
Authors:
Elena N. Govorun,
Julien Dupré de Baubigny,
Patrick Perrin,
Mathilde Reyssat,
Nadège Pantoustier,
Thomas Salez,
C. Monteux
Abstract:
Polymer association at liquid-liquid interfaces is a promising way to spontaneously obtain soft self-healing membranes. In the case of reversible bonding between two polymers, the macromolecules are mobile everywhere within the membrane and they can be absorbed into it at both boundaries due to binding to macromolecules of the other type. In this work, we develop the theoretical model of membrane…
▽ More
Polymer association at liquid-liquid interfaces is a promising way to spontaneously obtain soft self-healing membranes. In the case of reversible bonding between two polymers, the macromolecules are mobile everywhere within the membrane and they can be absorbed into it at both boundaries due to binding to macromolecules of the other type. In this work, we develop the theoretical model of membrane growth based on these assumptions. The asymptotic dependence of membrane thickness on time as h ~ t^(1/2), as typically observed in experiments in a stationary regime, reveals an interdiffusion-controlled process, where the polymer fluxes sustain the polymer absorption at the membrane boundaries. The membrane growth rate is mainly determined by the difference in equilibrium compositions at the boundaries, the association constant, the polymer lengths and mobilities. This model is further used to describe the growth of hydrogel membranes formed via H-bonding of polymers at the interface between a solution of poly(propylene oxide) (PPO) in isopropyl myristate and an aqueous solution of poly(methacrylic acid) (PMAA). The film thickness is measured by reflectometric methods. The dependence of thickness on time can be approximated by the power law t^(beta), where beta= 1/2 for the PMAA solution at pH=3 and decreases with increasing pH and, hence, ionization degree. The growth rate slows down about 25 times for 500-nm-thick films at pH = 5.1 compared to the case of pH = 3. The ionization degree of PMAA solutions was studied by potentiometric methods. Even a small change in ionization was found to influence the growth rate of the film. A slowdown of the film growth for the ionized polymer can be explained by a drop in the composition gradient in the membrane, as is predicted by the proposed model.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Swimming droplet in 1D geometries, an active Bretherton problem
Authors:
Charlotte de Blois,
Vincent Bertin,
Saori Suda,
Masatoshi Ichikawa,
Mathilde Reyssat,
Olivier Dauchot
Abstract:
We investigate experimentally the behavior of self-propelled water-in-oil droplets, confined in capillaries of different square and circular cross-sections. The droplet's activity comes from the formation of swollen micelles at its interface. In straight capillaries the velocity of the droplet decreases with increasing confinement. However at very high confinement, the velocity converges toward a…
▽ More
We investigate experimentally the behavior of self-propelled water-in-oil droplets, confined in capillaries of different square and circular cross-sections. The droplet's activity comes from the formation of swollen micelles at its interface. In straight capillaries the velocity of the droplet decreases with increasing confinement. However at very high confinement, the velocity converges toward a non-zero value, so that even very long droplets swim. Stretched circular capillaries are then used to explore even higher confinement. The lubrication layer around the droplet then takes a non-uniform thickness which constitutes a significant difference with usual flow-driven passive droplets. A neck forms at the rear of the droplet, deepens with increasing confinement, and eventually undergoes successive spontaneous splitting events for large enough confinement. Such observations stress the critical role of the activity of the droplet interface on the droplet's behavior under confinement. We then propose an analytical formulation by integrating the interface activity and the swollen micelles transport problem into the classical Bretherton approach. The model accounts for the convergence of the droplet's velocity to a finite value for large confinement, and for the non-classical shape of the lubrication layer. We further discuss on the saturation of the micelles concentration along the interface, which would explain the divergence of the lubrication layer thickness for long enough droplets, eventually leading to the spontaneous droplet division.
△ Less
Submitted 4 June, 2021; v1 submitted 17 March, 2021;
originally announced March 2021.
-
Growth mechanism of polymer membranes obtained by H-bonding across immiscible liquid interfaces
Authors:
J Dupré de Baubigny,
P. Perrin,
N. Pantoustier,
Thomas Salez,
M. Reyssat,
C. Monteux
Abstract:
Complexation of polymers at liquid interfaces is an emerging technique to produce all-liquid printable and self-healing devices and membranes. It is crucial to control the assembly process but the mechanisms at play remain unclear. Using two different reflectometric methods, we investigate the spontaneous growth of H-bonded PPO-PMAA membranes at a flat liquid-liquid interface. We find that the mem…
▽ More
Complexation of polymers at liquid interfaces is an emerging technique to produce all-liquid printable and self-healing devices and membranes. It is crucial to control the assembly process but the mechanisms at play remain unclear. Using two different reflectometric methods, we investigate the spontaneous growth of H-bonded PPO-PMAA membranes at a flat liquid-liquid interface. We find that the membrane thickness h grows with time t as h~t^(1/2), which is reminiscent of a diffusion-limited process. However, counter-intuitively, we observe that this process is faster as the PPO molar mass increases. We are able to rationalize these results with a model which considers the diffusion of the PPO chains within the growing membrane. The architecture of the latter is described as a gel-like porous network, with a pore size much smaller than the radius of the diffusing PPO chains, thus inducing entropic barriers that hinder the diffusion process. From the comparison between the experimental data and the result of the model, we extract some key piece of information about the microscopic structure of the membrane. This study opens the route toward the rational design of self-assembled membranes and capsules with optimal properties.
△ Less
Submitted 12 January, 2021; v1 submitted 30 June, 2020;
originally announced June 2020.
-
The flow field around a confined active droplet
Authors:
Charlotte de Blois,
Mathilde Reyssat,
Sebastien Michelin,
Olivier Dauchot
Abstract:
We present here first-of-a-kind experimental measurements of the flow field around a swimming water droplet, using confocal PIV in three dimensions. The droplet is denser than the continuous oil phase, and swims close and parallel to the bottom wall. The measured flow field is first quantitatively characterized and compared to the flow field obtained for an axisymmetric swimmer in unbounded flow.…
▽ More
We present here first-of-a-kind experimental measurements of the flow field around a swimming water droplet, using confocal PIV in three dimensions. The droplet is denser than the continuous oil phase, and swims close and parallel to the bottom wall. The measured flow field is first quantitatively characterized and compared to the flow field obtained for an axisymmetric swimmer in unbounded flow. Important qualitative differences are observed, in particular the emergence of a strong isotropic radial flow field in the planes parallel to the wall. These fundamental differences stress the critical impact of confinement on the flow field around the swimming droplet. We then propose an analytical formulation, based on a reduced order description of the swimming droplet in terms of fundamental hydrodynamic singularities as well as the classical method of images. This model is able to account exactly for the effect of the wall and provides a simplified description of the flow field as the superposition of axisymmetric dipole and quadrupole singularities. We demonstrate that this simplified description quantitatively captures the effect of the wall on the dipolar and quadrupolar components of the flow field. Further including the confinement-induced asymmetry of the concentration field responsible for the droplet's Marangoni propulsion, our model is also able to account for the monopolar contribution to the experimental flow field which drives the dominant far-field signature of the droplet.
△ Less
Submitted 8 May, 2019;
originally announced May 2019.
-
Probing the adsorption/desorption of amphiphilic polymers at the air-water interface during large interfacial deformations
Authors:
C. Trégouët,
Thomas Salez,
N. Pantoustier,
P. Perrin,
M. Reyssat,
C. Monteux
Abstract:
Hydrophobically modified polymers are good candidates for the stabilization of liquid interfaces thanks to the high anchoring energy of the hydrophobic parts. In this article we probe the interfacial anchoring of a series of home-made hydrophobically modified polymers of controlled degree of grafting by studying their behavior upon large area dilations and compressions. By comparing the measured i…
▽ More
Hydrophobically modified polymers are good candidates for the stabilization of liquid interfaces thanks to the high anchoring energy of the hydrophobic parts. In this article we probe the interfacial anchoring of a series of home-made hydrophobically modified polymers of controlled degree of grafting by studying their behavior upon large area dilations and compressions. By comparing the measured interfacial tension to the one that we expect in the case of a constant number of adsorbed monomers, we are able to deduce whether desorption or adsorption occurs during area variations. We find that the polymer chains with the longest hydrophobic grafts desorb for larger compressions than the polymers with the shortest grafts, because of their larger desorption energy. Furthermore, we observe more desorption for polymers with the highest grafting densities. We attribute this counter intuitive result to the fact that for high grafting densities, the length of the polymer loops is shorter, hence the elastic penalty upon compression is larger for these layers, leading to a faster desorption. The dilatation experiments reveal that the number of adsorbed anchors remains constant in the case of chains with low grafting density while chains with the highest degree of grafting seem to show some degree of adsorption during the dilatation. Therefore for these highly grafted chains there may be unadsorbed grafts remaining in the vicinity of the interface, which may adsorb quickly to the interface upon dilatation.
△ Less
Submitted 1 March, 2019;
originally announced March 2019.
-
Microfluidic probing of the complex interfacial rheology of multilayer capsules
Authors:
Corentin Tregouët,
Thomas Salez,
Mathilde Reyssat,
Cécile Monteux
Abstract:
Encapsulation of chemicals using polymer membranes enables to control their transport and delivery for applications such as agrochemistry or detergency. To rationalize the design of polymer capsules, it is necessary to understand how the membranes' mechanical properties control the transport and release of the cargo. In this article, we use microfluidics to produce model polymer capsules and study…
▽ More
Encapsulation of chemicals using polymer membranes enables to control their transport and delivery for applications such as agrochemistry or detergency. To rationalize the design of polymer capsules, it is necessary to understand how the membranes' mechanical properties control the transport and release of the cargo. In this article, we use microfluidics to produce model polymer capsules and study in situ their behavior in controlled elongational flows. Our model capsules are obtained by assembling polymer mono and hydrogen-bonded bilayers at the surface of an oil droplet in water. We also use microfluidics to probe in situ the mechanical properties of the membranes in a controlled elongational flow generated by introducing the capsules through a constriction and then in a larger chamber. The deformation and relaxation of the capsules depend on their composition and especially on the molecular interactions between the polymer chains that form the membranes and the anchoring energy of the first layer. We develop a model and perform numerical simulations to extract the main interfacial properties of the capsules from the measurement of their deformations in the microchannels.
△ Less
Submitted 14 December, 2018;
originally announced December 2018.
-
Transient deformation of a droplet near a microfluidic constriction : a quantitative analysis
Authors:
Corentin Trégouët,
Thomas Salez,
Cécile Monteux,
Mathilde Reyssat
Abstract:
We report on experiments that consist in deforming a collection of monodisperse droplets produced by a microfluidic chip through a flow-focusing device. We show that a proper numerical modelling of the flow is necessary to access the stress applied by the latter on the droplet along its trajectory through the chip. This crucial step enables the full integration of the differential equation governi…
▽ More
We report on experiments that consist in deforming a collection of monodisperse droplets produced by a microfluidic chip through a flow-focusing device. We show that a proper numerical modelling of the flow is necessary to access the stress applied by the latter on the droplet along its trajectory through the chip. This crucial step enables the full integration of the differential equation governing the dynamical deformation, and consequently the robust measurement of the interfacial tension by fitting the experiments with the calculated deformation. Our study thus demonstrates the feasibility of quantitative in-situ rheology in microfluidic flows involving e.g. droplets, capsules or cells.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Adsorption dynamics of hydrophobically modified polymers at an air-water interface
Authors:
Corentin Trégouët,
Alesya Mikhailovskaya,
Thomas Salez,
Nadège Pantoustier,
Patrick Perrin,
Mathilde Reyssat,
Cécile Monteux
Abstract:
Using surface-tension measurements, we study the brush-limited adsorption dynamics of a range of amphiphilic polymers, PAAH-$α$-$\textrm{C}_n$ composed of a poly(acrylic acid) backbone, PAAH, grafted with a fraction $α$ of alkyl moieties, containing either $n=8$ or $n=12$ carbon atoms, at pH conditions where the PAAH backbone is not charged. At short times, the surface tension decreases more sharp…
▽ More
Using surface-tension measurements, we study the brush-limited adsorption dynamics of a range of amphiphilic polymers, PAAH-$α$-$\textrm{C}_n$ composed of a poly(acrylic acid) backbone, PAAH, grafted with a fraction $α$ of alkyl moieties, containing either $n=8$ or $n=12$ carbon atoms, at pH conditions where the PAAH backbone is not charged. At short times, the surface tension decreases more sharply as the degree of grafting increases while at long times, the adsorption dynamics becomes logarithmic in time and is slower as the degree of grafting increases. This logarithmic behavior at long times indicates the building of a free-energy barrier which grows over time. To account for the observed surface tension evolution with the degree of grafting we propose a scenario, where the free-energy barrier results from both the deformation of the incoming polymer coils and the deformation of the adsorbed brush. Our model involves only two fitting parameters, the monomer size and the area needed for one molecule during adsorption and is in agreement with the experimental data. We obtain a reasonable value for the monomer size and find an area per adsorbed polymer chain of the order of 1nm$^2$, showing that the polymer chains are strongly stretched as they adsorb.
△ Less
Submitted 1 October, 2018; v1 submitted 21 June, 2017;
originally announced June 2017.
-
One-Step Fabrication of pH-Responsive Membranes and Microcapsules through Interfacial H-Bond Polymer Complexation
Authors:
Julien Dupré de Baubigny,
Corentin Trégouët,
Thomas Salez,
Nadège Pantoustier,
Patrick Perrin,
Mathilde Reyssat,
Cécile Monteux
Abstract:
Biocompatible microencapsulation is of widespread interest for the targeted delivery of active species in fields such as pharmaceuticals, cosmetics and agro-chemistry. Capsules obtained by the self-assembly of polymers at interfaces enable the combination of responsiveness to stimuli, biocompatibility and scaled up production. Here, we present a one-step method to produce in situ membranes at oil-…
▽ More
Biocompatible microencapsulation is of widespread interest for the targeted delivery of active species in fields such as pharmaceuticals, cosmetics and agro-chemistry. Capsules obtained by the self-assembly of polymers at interfaces enable the combination of responsiveness to stimuli, biocompatibility and scaled up production. Here, we present a one-step method to produce in situ membranes at oil-water interfaces, based on the hydrogen bond complexation of polymers between H-bond acceptor and donor in the oil and aqueous phases, respectively. This robust process is realized through different methods, to obtain capsules of various sizes, from the micrometer scale using microfluidics or rotor-stator emulsification up to the centimeter scale using drop drip**. The polymer layer exhibits unique self-healing and pH-responsive properties. The membrane is viscoelastic at pH = 3, softens as pH is progressively raised, and eventually dissolves above pH = 6 to release the oil phase. This one-step method of preparation paves the way to the production of large quantities of functional capsules.
△ Less
Submitted 15 May, 2017;
originally announced May 2017.
-
Microfluidic self assembly
Authors:
Bingqing Shen,
Joshua Ricouvier,
Mathilde Reyssat,
Florent Malloggi,
Patrick Tabeling
Abstract:
Recent progress in colloidal science has led to elaborate self-assembled structures whose complexity raises hopes for elaborating new materials. However, the throughputs are extremely low and consequently, the chance to produce materials of industrial interest, for instance, groundbreaking optical devices, harnessing complete three-dimensional band gaps, is markedly low.
We discovered a novel hy…
▽ More
Recent progress in colloidal science has led to elaborate self-assembled structures whose complexity raises hopes for elaborating new materials. However, the throughputs are extremely low and consequently, the chance to produce materials of industrial interest, for instance, groundbreaking optical devices, harnessing complete three-dimensional band gaps, is markedly low.
We discovered a novel hydrodynamic effect that may unlock this bottleneck. It is based on the dipolar flow interactions that build up when droplets are slowed down by the microchannel walls along which they are transported. Coupled with depletion forces, we succeeded to form, via a continuous flow process, at unprecedented speeds and under exquisite control, a rich ensemble of monodisperse planar and tridimensional clusters, such as chains, triangles, diamonds, tetahedrons, heterotrimers, possessing geometrical, chemical, and/or magnetic anisotropies enabling directional bonding. Continuous productions of millions of building blocks per second for elaborating new functional materials can be envisioned.
△ Less
Submitted 13 September, 2014;
originally announced September 2014.
