-
Lifetime of vertical giant soap films: role of the relative humidity and film dimensions
Authors:
Marina Pasquet,
François Boulogne,
Frédéric Restagno,
Emmanuelle Rio
Abstract:
We consider the lifetime of rectangular vertical soap films and we explore the influence of relative humidity and both dimensions on the stability of large soap films, reaching heights of up to 1.2 m. Using an automated rupture detection system, we achieve a robust statistical measurement of their lifetimes and we also measure the film thinning dynamics. We demonstrate that drainage has a negligib…
▽ More
We consider the lifetime of rectangular vertical soap films and we explore the influence of relative humidity and both dimensions on the stability of large soap films, reaching heights of up to 1.2 m. Using an automated rupture detection system, we achieve a robust statistical measurement of their lifetimes and we also measure the film thinning dynamics. We demonstrate that drainage has a negligible impact on the film stability as opposed to evaporation. To do so, we compare the measured lifetimes with predictions from the Boulogne \& Dollet model \cite{BoulogneDollet2018}, originally designed to describe the convective evaporation of hydrogels. Interestingly, we show that this model can predict a maximum film lifetime for all sizes.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
Evaporation-induced temperature gradient in a foam column
Authors:
François Boulogne,
Emmanuelle Rio,
Frédéric Restagno
Abstract:
Various parameters affect the foam stability: surface and bulk rheology of the solution, gravitational drainage, mechanical vibrations, bubble gas composition, and also evaporation. Evaporation is often considered through the prism of a liquid loss, but it also induces a cooling effect due to the enthalpy of vaporization. In this study, we combine a theoretical and experimental approach to explore…
▽ More
Various parameters affect the foam stability: surface and bulk rheology of the solution, gravitational drainage, mechanical vibrations, bubble gas composition, and also evaporation. Evaporation is often considered through the prism of a liquid loss, but it also induces a cooling effect due to the enthalpy of vaporization. In this study, we combine a theoretical and experimental approach to explore the temperature field in a foam column evaporating from the top. We show that a measurable temperature profile exists in this geometry with temperatures at the interface lower than the environmental temperature by few degrees. We demonstrate that the temperature profile is the result of a balance between the enthalpy of vaporization and heat fluxes originating from the thermal conduction of foam and air and the thermal radiation. For small foam thicknesses compared to the radius, we found that the temperature gradient is established over the foam thickness while for large aspect ratios, the gradient is spanning over a lengthscale comparable to the tube radius.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Measuring relative humidity from evaporation with a wet-bulb thermometer: the psychrometer
Authors:
Marie Corpart,
Frédéric Restagno,
François Boulogne
Abstract:
Measuring the relative humidity of air is an important challenge for meteorological measurements, food conservation, building design, and evaporation control, among other applications. Relative humidity can be measured with a psychrometer, which is a hygrometer composed of two identical thermometers. The bulb of one thermometer is covered by a wick soaked with water so that evaporative cooling mak…
▽ More
Measuring the relative humidity of air is an important challenge for meteorological measurements, food conservation, building design, and evaporation control, among other applications. Relative humidity can be measured with a psychrometer, which is a hygrometer composed of two identical thermometers. The bulb of one thermometer is covered by a wick soaked with water so that evaporative cooling makes it indicate a lower temperature than the dry-bulb thermometer; it is possible to determine the relative humidity from the difference between these readings. We describe both a model and an experimental setup to illustrate the principle of a psychrometer for a pedagogical laboratory. The science of psychrometry could be more broadly taught at the undergraduate level to help introduce students to aspects of measurement techniques, fluid mechanics, heat transfer, and non-equilibrium thermodynamics.
△ Less
Submitted 19 September, 2023; v1 submitted 12 September, 2023;
originally announced September 2023.
-
Quasi-crystalline order in vibrated granular matter
Authors:
Andrea Plati,
Raphael Maire,
Etienne Fayen,
Francois Boulogne,
Frederic Restagno,
Frank Smallenburg,
Giuseppe Foffi
Abstract:
Quasi-crystals are aperiodic structures that present crystallographic properties which are not compatible with that of a single unit cell. Their revolutionary discovery in a metallic alloy, less than three decades ago, has required a full reconsideration of what we defined as a crystal structure. Surprisingly, quasi-crystalline structures have been discovered also at much larger length scales in d…
▽ More
Quasi-crystals are aperiodic structures that present crystallographic properties which are not compatible with that of a single unit cell. Their revolutionary discovery in a metallic alloy, less than three decades ago, has required a full reconsideration of what we defined as a crystal structure. Surprisingly, quasi-crystalline structures have been discovered also at much larger length scales in different microscopic systems for which the size of elementary building blocks ranges between the nanometric to the micrometric scale. Here, we report the first experimental observation of spontaneous quasi-crystal self-assembly at the millimetric scale. This result is obtained in a fully athermal system of macroscopic spherical grains vibrated on a substrate. Starting from a liquid-like disordered phase, the grains begin to locally arrange into three types of squared and triangular tiles that eventually align, forming 8-fold symmetric quasi-crystal that has been predicted in simulation but not yet observed experimentally in non-atomic systems. These results are not only the proof of a novel route to spontaneously assemble quasi-crystals but are of fundamental interest for the connection between equilibrium and non-equilibrium statistical physics.
△ Less
Submitted 4 July, 2023;
originally announced July 2023.
-
Analytical prediction of the temperature and the lifetime of an evaporating spherical droplet
Authors:
Marie Corpart,
Frédéric Restagno,
François Boulogne
Abstract:
In this paper, we propose to predict analytically the temperature of an evaporating spherical droplet. To do so, we first review, from data in the literature, the effect of temperature on the physical parameters involved in cooling-induced evaporation, namely the saturating vapor pressure, the diffusion coefficient of vapor in air, the liquid density, the enthalpy of vaporization and the thermal c…
▽ More
In this paper, we propose to predict analytically the temperature of an evaporating spherical droplet. To do so, we first review, from data in the literature, the effect of temperature on the physical parameters involved in cooling-induced evaporation, namely the saturating vapor pressure, the diffusion coefficient of vapor in air, the liquid density, the enthalpy of vaporization and the thermal conductivity of air. These data support a series of approximations that allows us to derive an implicit equation for the liquid temperature. We propose a quadratic approximation of the variation of the saturating vapor concentration with temperature to obtain an explicit prediction of the drop temperature. As a result, an analytical prediction of the droplet lifetime including the cooling effect is proposed.
△ Less
Submitted 30 June, 2023;
originally announced June 2023.
-
Simultaneous depletion and adsorption in polymer solutions near a solid wall
Authors:
Suzanne Lafon,
Tiago Outerelo-Corvo,
Marion Grzelka,
Arnaud Hélary,
Philipp Gutfreund,
Liliane Léger,
Alexis Chennevière,
Frédéric Restagno
Abstract:
Polymer solutions exhibit peculiar properties near surfaces: polymer chains either adsorb onto or can be repelled by the wall. Only a few techniques are able to probe their structure in the vicinity of solid substrates, because of the small length scales over which liquids are influenced by the wall. In this paper, we use neutron reflectivity measurements at the interface between a polystyrene sem…
▽ More
Polymer solutions exhibit peculiar properties near surfaces: polymer chains either adsorb onto or can be repelled by the wall. Only a few techniques are able to probe their structure in the vicinity of solid substrates, because of the small length scales over which liquids are influenced by the wall. In this paper, we use neutron reflectivity measurements at the interface between a polystyrene semidilute solution in a good solvent and a smooth sapphire surface. We show that polymer chains are globally depleted from the solid surface, but contrary to what is generally assumed, this does not prevent some chains to still adsorb on the wall. We also observe that the Newtonian flow of the solution has a negligible effect on the size of the depletion layer, which is a hypothesis often made but rarely measured in the literature.
△ Less
Submitted 10 May, 2023;
originally announced May 2023.
-
Coffee stain effect on a fibre from axisymmetric droplets
Authors:
Marie Corpart,
Frédéric Restagno,
François Boulogne
Abstract:
The so-called coffee stain effect has been intensively studied over the past decades, but most of the studies are focused on sessile droplets. In this paper, we analyse the origin of the difference between the deposition of suspended particles in a sessile drop and in an axisymmetric drop deposited on a fibre. First, we model the shape of a drop on a fibre and its evaporative flux with some approx…
▽ More
The so-called coffee stain effect has been intensively studied over the past decades, but most of the studies are focused on sessile droplets. In this paper, we analyse the origin of the difference between the deposition of suspended particles in a sessile drop and in an axisymmetric drop deposited on a fibre. First, we model the shape of a drop on a fibre and its evaporative flux with some approximations to derive analytical calculations. Then, for pinned contact lines, we solve the hydrodynamics equations in the liquid phase under the lubrication approximation to determine the flow velocity toward the contact lines. We comment these results by comparison to a sessile drop of similar evaporating conditions, and we show that the substrate curvature plays a role on the contact line depinning, the local evaporative flux, and the liquid flow field. The competition between the advection and the Brownian motion indicates that the transport of the particles toward the contact line occurs in a volume localised in the close vicinity of the contact lines for a drop on a fibre. Thus, the fibre geometry induces a weaker accumulation of particles at the contact line compared to a sessile drop, leading to the more homogeneous deposit observed experimentally.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
Measurement of the temperature decrease in evaporating soap films
Authors:
François Boulogne,
Frédéric Restagno,
Emmanuelle Rio
Abstract:
Recent advances have demonstrated that evaporation can play a significant role on soap film stability, which is a key concern in many industrial areas but also for children playing with bubbles. Thus, evaporation leads to a film thinning but also to a film cooling, which has been overlooked for soapy objects. Here, we study the temperature variation of an evaporating soap film for different values…
▽ More
Recent advances have demonstrated that evaporation can play a significant role on soap film stability, which is a key concern in many industrial areas but also for children playing with bubbles. Thus, evaporation leads to a film thinning but also to a film cooling, which has been overlooked for soapy objects. Here, we study the temperature variation of an evaporating soap film for different values of relative humidity and glycerol concentrations. We evidence that the temperature of soap films can decrease after their creation up to 8$~^\text{o}$C. We propose a model describing the temperature drop of soap films after their formation that is in quantitative agreement with our experiments. We emphasize that this cooling effect is significant and must be carefully considered in future studies on the dynamics of soap films.
△ Less
Submitted 14 December, 2022;
originally announced December 2022.
-
An optimized recipe for making giant bubble
Authors:
Marina Pasquet,
Laura Wallon,
Pierre-Yves Fusier,
Frédéric Restagno,
Emmanuelle Rio
Abstract:
Big bubbles are largely used in physics laboratories to study 2D turbulence, surface wavers, fundamental properties of soap systems... On a more artistic point of view, blowing big bubbles is part of many artistic shows. Both communities usually wan to get reasonably stable foam films. The purpose of this article is to propose the main physical ingredients allowing to identify a good recipe for ma…
▽ More
Big bubbles are largely used in physics laboratories to study 2D turbulence, surface wavers, fundamental properties of soap systems... On a more artistic point of view, blowing big bubbles is part of many artistic shows. Both communities usually wan to get reasonably stable foam films. The purpose of this article is to propose the main physical ingredients allowing to identify a good recipe for making stable films and bubbles. We propose controlled experiments, to measure both the easiness to generate a bubble and its stability for different stabilizing solutions, which we choose by adding one by one the ingredients contained in an artist's recipe. The main results are that (i) the surfactant concentration must be not too high (ii) the solution must contain some long flexible polymer chains to allow an easy bubble generation and (iii) the addition of glycerol allows a better bubble stability by avoiding evaporation. We finally propose an efficient recipe, which takes into account all these considerations.
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
Thickness profiles of giant soap films
Authors:
Marina Pasquet,
Frédéric Restagno,
Isabelle Cantat,
Emmanuelle Rio
Abstract:
Production, drainage and stability of foams films, i.e. films in contact with their menisci, are fascinating problems that remain still unsolved. In this article, we propose to explore the regime of large velocities and large film sizes. This one is not accessible in experiments classically conducted in the literature, and allows us to study the regime of large extension and large extension rates.…
▽ More
Production, drainage and stability of foams films, i.e. films in contact with their menisci, are fascinating problems that remain still unsolved. In this article, we propose to explore the regime of large velocities and large film sizes. This one is not accessible in experiments classically conducted in the literature, and allows us to study the regime of large extension and large extension rates. With our setup, we make soap films up to two meters high by pulling a horizontal fishing line driven by belts out of a soapy solution at velocities ranging from 20~cm/s to 250~cm/s. We characterize the thickness profile of the central part of the film that behaves like a rubber band under tension. We show that its thickness profile is well described by a static model in which a homogeneous elastic film is stretched by its own weight. This leads to an exponential thickness profile with a characteristic length given by a competition between gravity and surface elasticity. The prefactor is fixed by the shape and area of the film, governed by the fishing line motion but also by a continuous extraction of foam film from the lateral menisci, thicker than the central part, and that progressively invades the film from its lateral boundaries. The model we propose captures the subtle interplay between gravity, film elasticity and film extraction and leads to predictions in good agreement with our experimental data.
△ Less
Submitted 21 April, 2023; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Giant slip length at a supercooled liquid-solid interface
Authors:
Suzanne Lafon,
Alexis Chennevière,
Frédéric Restagno,
Samy Merabia,
Laurent Joly
Abstract:
The effect of temperature on friction and slip at the liquid-solid interface has attracted attention over the last twenty years, both numerically and experimentally. However, the role of temperature on slip close to the glass transition has been less explored. Here, we use molecular dynamics to simulate a bi-disperse atomic fluid, which can remain liquid below its melting point (supercooled state)…
▽ More
The effect of temperature on friction and slip at the liquid-solid interface has attracted attention over the last twenty years, both numerically and experimentally. However, the role of temperature on slip close to the glass transition has been less explored. Here, we use molecular dynamics to simulate a bi-disperse atomic fluid, which can remain liquid below its melting point (supercooled state), to study the effect of temperature on friction and slip length between the liquid and a smooth apolar wall, in a broad range of temperatures. At high temperatures, an Arrhenius law fits well the temperature dependence of viscosity, friction and slip length. In contrast, when the fluid is supercooled, the viscosity becomes super-Arrhenian, while interfacial friction can remain Arrhenian or even drastically decrease when lowering the temperature, resulting in a massive increase of the slip length. We rationalize the observed superlubricity by the surface crystallization of the fluid, and the incommensurability between the structures of the fluid interfacial layer and of the wall. This study calls for experimental investigation of the slip length of supercooled liquids on low surface energy solids.
△ Less
Submitted 30 November, 2022; v1 submitted 25 July, 2022;
originally announced July 2022.
-
Evaporation of liquid coating a fiber
Authors:
Marie Corpart,
Julien Dervaux,
Christophe Poulard,
Frédéric Restagno,
François Boulogne
Abstract:
We investigate theoretically and numerically the diffusion-limited evaporation of a liquid deposited on a fiber in two configurations: a sleeve and a axisymmetric barrel-shaped droplet. For a sleeve, the local flux depends on both the aspect ratio and the smallest length of the problem. By using analytical calculations and 3D finite elements simulations, we predict a divergence of this flux furthe…
▽ More
We investigate theoretically and numerically the diffusion-limited evaporation of a liquid deposited on a fiber in two configurations: a sleeve and a axisymmetric barrel-shaped droplet. For a sleeve, the local flux depends on both the aspect ratio and the smallest length of the problem. By using analytical calculations and 3D finite elements simulations, we predict a divergence of this flux further localized at the edge as the aspect ratio increases. The evaporation of axisymmetric drops on a fiber is studied with numerical simulations. For sufficiently large volumes, we evidence that the evaporation rate is almost independent of the wetting properties of the liquid, even for small contact angles, and that the droplets evaporate as spheres of the same volume.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Multiscale structure of poly(ionic liquid)s in bulk and solutions by small angle neutron scattering
Authors:
Tiago Outerelo-Corvo,
Antoine Jourdain,
Shona O'Brien,
Frédéric Restagno,
Éric Drockenmuller,
Alexis Chenneviere
Abstract:
Poly(ionic liquid)s (PILs), similar to their ionic liquid (IL) analogues, present a nanostructure arising from local interactions. The influence of this nanostructure on the macromolecular conformation of polymer chains is investigated for the first time by means of an extensive use of small angle neutron scattering on a series of poly(1-vinyl-3-alkylimidazolium)s with varying alkyl side-chain len…
▽ More
Poly(ionic liquid)s (PILs), similar to their ionic liquid (IL) analogues, present a nanostructure arising from local interactions. The influence of this nanostructure on the macromolecular conformation of polymer chains is investigated for the first time by means of an extensive use of small angle neutron scattering on a series of poly(1-vinyl-3-alkylimidazolium)s with varying alkyl side-chain length and counter-anion both in bulk and in dilute solutions. Radii of gyration are found to increase with the side-chain length in solution as a consequence of crowding interactions between neighboring monomers. In bulk, however, a non monotonic evolution of the radius of gyration reflects a change in chain flexibility and a potential screening of electrostatic interactions. Additionally at smaller scale, SANS provides an experimental estimation of both the chain diameter and the correlation length between neighboring chains, comparison of which unveils clear evidence of interdigitation of the alkyl side-chains. These structural features bring precious insights in the understanding of the dynamic properties of PILs.
△ Less
Submitted 20 February, 2022;
originally announced February 2022.
-
Impact of physical-chemistry on the film thinning in surface bubbles
Authors:
Marina Pasquet,
François Boulogne,
Julien Saint-Anna,
Frédéric Restagno,
Emmanuelle Rio
Abstract:
In this paper, we investigate the thinning dynamics of evaporating surfactant-stabilised surface bubbles by considering the role of the physical-chemistry of solutions used in the liquid bath. We study the impact of the surfactant concentration below and above the cmc (critical micelle concentration) and the role of ambient humidity. First, in a humidity-saturated atmosphere, we show that if the i…
▽ More
In this paper, we investigate the thinning dynamics of evaporating surfactant-stabilised surface bubbles by considering the role of the physical-chemistry of solutions used in the liquid bath. We study the impact of the surfactant concentration below and above the cmc (critical micelle concentration) and the role of ambient humidity. First, in a humidity-saturated atmosphere, we show that if the initial thickness depends on the surfactant concentration and is limited by the surface elasticity, the drainage dynamics are very well described from the capillary and gravity contributions. These dynamics are independent of the surfactant concentration. In a second part, our study reveals that the physical-chemistry impacts the thinning dynamics through evaporation. We include in the model the additional contribution due to evaporation, which shows a good description of the experimental data below the cmc. Above the cmc, although this model is unsatisfactory at short times, the dynamics at long times is correctly rendered and we establish that the increase of the surfactant concentration decreases the impact of evaporation. Finally, the addition of a hygroscopic compound, glycerol, can be also rationalized by our model. We demonstrate that glycerol decreases the bubble thinning rate at ambient humidity, thus increasing their stability.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
Effect of the density of pillar-patterned substrates on the contact mechanics: Transition from top to mixed contact with a detailed pressure-field description
Authors:
Rene Ledesma-Alonso,
Elie Raphael,
Frederic Restagno,
Christophe Poulard
Abstract:
Different contact regimes between a spherical lens and a periodically patterned substrate are observed, when they are pressed against each other. Top contact occurs when only the highest substrate sections touch the lens, whereas mixed contact implies that both the highest and the lowest substrate sections come into contact with the lens. In this paper, we study how the pattern density of the subs…
▽ More
Different contact regimes between a spherical lens and a periodically patterned substrate are observed, when they are pressed against each other. Top contact occurs when only the highest substrate sections touch the lens, whereas mixed contact implies that both the highest and the lowest substrate sections come into contact with the lens. In this paper, we study how the pattern density of the substrate, along with its physical properties and those of the lens, determine the transition from top contact to mixed contact. Experiments and numerical simulations had been performed, as complementary approaches to obtain data, and a theoretical analysis has been developed to gain insight on the effect of the physical parameters on the contact transition. As a result, a phase diagram is presented, in terms of the load and the contact radius, that combines the observations of the three approaches (experimental, numerical, and theoretical), unveiling the boundaries of three contact regimes: (1) deterministic-driven contact, (2) top contact, and (3) mixed contact.
△ Less
Submitted 25 November, 2021; v1 submitted 23 July, 2021;
originally announced July 2021.
-
Slip and friction mechanisms at polymer semi-dilute solutions / solid interfaces
Authors:
Marion Grzelka,
Iurii Antoniuk,
Eric Drockenmuller,
Alexis Chennevière,
Liliane Léger,
Frédéric Restagno
Abstract:
The role of the polymer volume fraction, $φ$, on steady state slippage and interfacial friction is investigated for a semi-dilute polystyrene solutions in diethyl phthalate in contact with two solid surfaces. Signicant slippage is evidenced for all samples, with slip lengths b obeying a power law dependence. The Navier's interfacial friction coecient, k, is deduced from the slip length measurement…
▽ More
The role of the polymer volume fraction, $φ$, on steady state slippage and interfacial friction is investigated for a semi-dilute polystyrene solutions in diethyl phthalate in contact with two solid surfaces. Signicant slippage is evidenced for all samples, with slip lengths b obeying a power law dependence. The Navier's interfacial friction coecient, k, is deduced from the slip length measurements and from independent measurements of the solutions viscosity $η$. The observed scaling of k versus $φ$ clearly excludes a molecular mechanism of friction based on the existence of a depletion layer. Instead, we show that the data of $η$($φ$) and k($φ$) are understood when taking into account the dependence of the solvent friction on $φ$. Two models, based on the friction of blobs or of monomers on the solid surface, well describe our data. Both points out that the Navier's interfacial friction is a semi-local phenomenon.
△ Less
Submitted 10 May, 2021;
originally announced May 2021.
-
A new setup for giant soap films characterization
Authors:
Sandrine Mariot,
Marina Pasquet,
Vincent Klein,
Frédéric Restagno,
Emmanuelle Rio
Abstract:
Artists, using an empirical knowledge, manage to generate and play with giant soap films and bubbles. Until now, scientific studies of soap films generated at a controlled velocity and without any feeding from the top, studied films of a few square centimeters. The present work aims to present a new setup to generate and characterize giant soap films (2~m $\times$ 0.7~m). Our setup is enclosed in…
▽ More
Artists, using an empirical knowledge, manage to generate and play with giant soap films and bubbles. Until now, scientific studies of soap films generated at a controlled velocity and without any feeding from the top, studied films of a few square centimeters. The present work aims to present a new setup to generate and characterize giant soap films (2~m $\times$ 0.7~m). Our setup is enclosed in a humidity-controlled box of 2.2~m high, 1~m long and 0.75~m large. Soap films are entrained by a fishing line withdrawn out of a bubbling solution at various velocities. We measure the maximum height of the generated soap films, as well as their lifetime, thanks to an automatic detection. This is allowed by light-sensitive resistors collecting the light reflected on the soap films and ensures robust statistical measurements. In the meantime, thickness measurements are performed with a UV-VIS-spectrometer, allowing us to map the soap films thickness over time.
△ Less
Submitted 13 February, 2021;
originally announced February 2021.
-
Near-surface rheology and hydrodynamic boundary condition of semi-dilute polymer solutions
Authors:
Gabriel Guyard,
Alexandre Vilquin,
Nicolas Sanson,
Frederic Restagno,
Joshua D. Mcgraw
Abstract:
Understanding confined flows of complex fluids requires simultaneous access to the mechanical behaviour of the liquid and the boundary condition at the interfaces. Here, we use evanescent wave microscopy to investigate near-surface flows of semi-dilute, unentangled polyacrylamide solutions. By using both neutral and anionic polymers, we show that monomer charge plays a key role in confined polymer…
▽ More
Understanding confined flows of complex fluids requires simultaneous access to the mechanical behaviour of the liquid and the boundary condition at the interfaces. Here, we use evanescent wave microscopy to investigate near-surface flows of semi-dilute, unentangled polyacrylamide solutions. By using both neutral and anionic polymers, we show that monomer charge plays a key role in confined polymer dynamics. For solutions in contact with glass, the neutral polymers display chain-sized adsorbed layers, while a shear-rate-dependent apparent slip length is observed for anionic polymer solutions. The slip lengths measured at all concentrations collapse onto a master curve when scaled using a simple two-layer depletion model with non-Newtonian viscosity. A transition from an apparent slip boundary condition to a chain-sized adsorption layer is moreover highlighted by screening the charge with additional salt in the anionic polymer solutions. We anticipate that our study will be a starting point for more complex studies relating the polymer dynamics at interfaces to their chemical and physical composition.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
-
Time dependence of advection-diffusion coupling for nanoparticle ensembles
Authors:
Alexandre Vilquin,
Vincent Bertin,
Pierre Soulard,
Gabriel Guyard,
Elie Raphaël,
Frederic Restagno,
Thomas Salez,
Joshua Mcgraw
Abstract:
Advection-diffusion coupling can enhance particle and solute dispersion by orders of magnitude as compared to pure diffusion, with a steady state being reached for confined flow regions such as a nanopore or blood vessel. Here, by using evanescent wave microscopy, we measure for the first time the full dynamics of Taylor dispersion, highlighting the crucial role of the initial concentration profil…
▽ More
Advection-diffusion coupling can enhance particle and solute dispersion by orders of magnitude as compared to pure diffusion, with a steady state being reached for confined flow regions such as a nanopore or blood vessel. Here, by using evanescent wave microscopy, we measure for the first time the full dynamics of Taylor dispersion, highlighting the crucial role of the initial concentration profile. We make time-dependent, nanometrically-resolved particle dispersion measurements varying nanoparticle size, velocity gradient, and viscosity in sub-micrometric near-surface flows. Such resolution permits a measure of the full dynamical approach and crossover into the steady state, revealing a family of master curves. Remarkably, our results show that the dynamics depend sensitively on the initial spatial distribution of the nanoparticles. These observations are in quantitative agreement with existing analytical models and numerical simulations performed herein. We anticipate that our study will be a first step toward observing and modelling more complex situations at the nanoscale, such as target finding and chemical reactions in nanoconfined flows, dynamical adsorption and capture problems, as well as nanoscale drug delivery systems.
△ Less
Submitted 29 April, 2021; v1 submitted 16 July, 2020;
originally announced July 2020.
-
Nonlinear amplification of adhesion forces in interleaved books
Authors:
Raphaelle Taub,
Thomas Salez,
Hector Alarcon,
Elie Raphael,
Christophe Poulard,
Frédéric Restagno
Abstract:
Two interleaved phonebooks are nearly impossible to separate by pulling their spines. The very slight force exerted by the outer sheets of the assembly is amplified as the exponential of the square of the number of sheets, leading to a highly-resistant system even with a small number of sheets. We present a systematic and detailed study of the influences of the normal external force and the geomet…
▽ More
Two interleaved phonebooks are nearly impossible to separate by pulling their spines. The very slight force exerted by the outer sheets of the assembly is amplified as the exponential of the square of the number of sheets, leading to a highly-resistant system even with a small number of sheets. We present a systematic and detailed study of the influences of the normal external force and the geometrical parameters of the booklets on the assembly strength. We conclude that the paper-paper adhesion force between the two outer sheets, on the order of a few mN, is the one that is amplified by the two interleaved system. The two-phonebooks experiment that has attracted the attention of students and non-scientific public all around the world as an outstanding demonstration of the strength of friction appears to be as well a spectacular macroscopic manifestation of the microscopic friction-adhesion coupling.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
Viscoelasticity induced onset of slip at the wall for polymer fluids
Authors:
Marion Grzelka,
Iurii Antoniuk,
Eric Drockenmuller,
Alexis Chennevière,
Liliane Léger,
Frédéric Restagno
Abstract:
The progressive onset of slip at the wall, which corresponds to a slip length increasing with the solicitation time before reaching a plateau, has been investigated for model viscoelastic polymer solutions, allowing one to vary the longest relaxation time while kee** constant solid - fluid interactions. A hydrodynamic model based on a Maxwell fluid and the classical Navier's hypothesis of a line…
▽ More
The progressive onset of slip at the wall, which corresponds to a slip length increasing with the solicitation time before reaching a plateau, has been investigated for model viscoelastic polymer solutions, allowing one to vary the longest relaxation time while kee** constant solid - fluid interactions. A hydrodynamic model based on a Maxwell fluid and the classical Navier's hypothesis of a linear response for the friction stress at the interface fully accounts for the data, without any adjustable parameter. No viscoelastic response needs be postulated for the friction, reflecting the local character of solid-liquid friction mechanisms.
△ Less
Submitted 22 June, 2020; v1 submitted 9 February, 2020;
originally announced February 2020.
-
Roughness-induced friction in liquid foams
Authors:
Manon Marchand,
Frédéric Restagno,
Emmanuelle Rio,
François Boulogne
Abstract:
Complex liquids flow is known to be drastically affected by the roughness condition at the interfaces. We combined stresses measurements and observations of the flow during the motion of different rough surfaces in dry liquid foams. We visually show that three distinct friction regimes exists: slippage, stick-slip motion, and anchored soap films. Our stress measurements are validated for slippage…
▽ More
Complex liquids flow is known to be drastically affected by the roughness condition at the interfaces. We combined stresses measurements and observations of the flow during the motion of different rough surfaces in dry liquid foams. We visually show that three distinct friction regimes exists: slippage, stick-slip motion, and anchored soap films. Our stress measurements are validated for slippage and anchored regimes based on existing models, and we propose a leverage rule to describe the stresses during the stick-slip regime. We find that the occurrence of the stick-slip or anchored regimes is controlled by the roughness factor, defined as the ratio between the size of the surface asperities and the radius of curvature of the Plateau borders.
△ Less
Submitted 10 February, 2020; v1 submitted 23 January, 2020;
originally announced January 2020.
-
Temperature-Controlled Slip of Polymer Melts on Ideal Substrates
Authors:
Marceau Hénot,
Marion Grzelka,
Jian Zhang,
Sandrine Mariot,
Iurii Antoniuk,
Eric Drockenmuller,
Liliane Léger,
Frédéric Restagno
Abstract:
The temperature dependence of the hydrodynamic boundary condition between a PDMS melt and two different non-attractive surfaces made of either an OTS (octadecyltrichlorosilane) self-assembled monolayer (SAM) or a grafted layer of short PDMS chains has been characterized. A slip length proportional to the fluid viscosity is observed on both surfaces. The slip temperature dependence is deeply influe…
▽ More
The temperature dependence of the hydrodynamic boundary condition between a PDMS melt and two different non-attractive surfaces made of either an OTS (octadecyltrichlorosilane) self-assembled monolayer (SAM) or a grafted layer of short PDMS chains has been characterized. A slip length proportional to the fluid viscosity is observed on both surfaces. The slip temperature dependence is deeply influenced by the surfaces. The viscous stress exerted by the polymer liquid on the surface is observed to follow exactly the same temperature dependences as the friction stress of a cross-linked elastomer sliding on the same surfaces. Far above the glass transition temperature, these observations are rationalized in the framework of a molecular model based on activation energies: increase or decrease of the slip length with increasing temperatures can be observed depending on how the activation energy of the bulk viscosity compares to that of the interfacial Navier's friction coefficient.
△ Less
Submitted 21 October, 2018;
originally announced October 2018.
-
Boundary flow of viscoelastic polyelectrolyte solutions
Authors:
Chloé Barraud,
Benjamin Cross,
Cyril Picard,
Frédéric Restagno,
Liliane Léger,
Elisabeth Charlaix
Abstract:
We report an investigation of the equilibrium and dynamic properties of polyelectrolyte solutions confined between platinum surfaces with a dynamic Surface Force Apparatus. The polyelectrolyte adsorbs on the surfaces in a dense compact layer bearing a surface charge in good agreement with the theoretical predictions. The flow of the solution on this charged adsorbed layer is probed over four decad…
▽ More
We report an investigation of the equilibrium and dynamic properties of polyelectrolyte solutions confined between platinum surfaces with a dynamic Surface Force Apparatus. The polyelectrolyte adsorbs on the surfaces in a dense compact layer bearing a surface charge in good agreement with the theoretical predictions. The flow of the solution on this charged adsorbed layer is probed over four decades of spatial scales and one decade of frequency by dynamic measurements. At distances larger than the hundredth of nanometers, the flow of the viscoelastic solution is well described by a partial slip boundary condition. We show that the wall slip is quantitatively described by an interfacial friction coefficient, according to the original Navier's formulation, and not by a slip length. At smaller distance the partial slip model overestimates the solution mobility, and we observe the presence of a low viscosity layer coating the surfaces. The viscosity and thickness of this boundary layer are directly resolved, and found to be independent on shear-rate, frequency, and confinement. We discuss the thickness of the low viscosity layer in terms of the structural length of the semi-dilute solution and the Debye length screening the adsorbed layer charge.
△ Less
Submitted 9 March, 2018;
originally announced March 2018.
-
Wall slip of complex fluids: interfacial friction or slip length?
Authors:
Benjamin Cross,
Chloé Barraud,
Cyril Picard,
Liliane Léger,
Frédéric Restagno,
Elisabeht Charlaix
Abstract:
Using a dynamic Surface Force Apparatus, we demonstrate that the notion of slip length used to describe the boundary flow of simple liquids, is not appropriate for viscoelastic liquids. Rather, the appropriate description lies in the original Navier's partial slip boundary condition, formulated in terms of an interfacial friction coefficient. We establish an exact analytical expression to extract…
▽ More
Using a dynamic Surface Force Apparatus, we demonstrate that the notion of slip length used to describe the boundary flow of simple liquids, is not appropriate for viscoelastic liquids. Rather, the appropriate description lies in the original Navier's partial slip boundary condition, formulated in terms of an interfacial friction coefficient. We establish an exact analytical expression to extract the interfacial friction coefficient from oscillatory drainage forces between a sphere and a plane, suitable for dynamic SFA or Atomic Force Microscopy non-contact measurements. We use this model to investigate the boundary friction of viscoelastic polymer solutions over 5 decades of film thicknesses and one decade in frequency. The proper use of the original Navier's condition describes accurately the complex hydrodynamic force up to scales of tens of micrometers, with a simple "Newtonian-like" friction coefficient, not frequency dependent, and reflecting closely the dynamics of an interfacial depletion layer at the solution/solid interface.
△ Less
Submitted 23 May, 2018; v1 submitted 9 March, 2018;
originally announced March 2018.
-
Influence of evaporation on soap film rupture
Authors:
Lorène Champougny,
Robin Henaff,
Frédéric Restagno,
François Boulogne,
Emmanuelle Rio
Abstract:
Although soap films are prone to evaporate due to their large surface to volume ratio, the effect of evaporation on macroscopic film features has often been disregarded in the literature. In this work, we investigate experimentally the influence of environmental humidity on soap film stability. An original experiment allows to measure both the maximum length of a film pulled at constant velocity a…
▽ More
Although soap films are prone to evaporate due to their large surface to volume ratio, the effect of evaporation on macroscopic film features has often been disregarded in the literature. In this work, we investigate experimentally the influence of environmental humidity on soap film stability. An original experiment allows to measure both the maximum length of a film pulled at constant velocity and its thinning dynamics in a controlled atmosphere for various values of the relative humidity $\RH$. At first order, the environmental humidity seems to have almost no impact on most of the film thinning dynamics. However, we find that the film length at rupture increases continuously with $\RH$. To rationalize our observations, we propose that the film bursting occurs when the thinning due to evaporation becomes comparable to the thinning due to liquid drainage. This rupture criterion turns out to be in reasonable agreement with an estimation of the evaporation rate in our experiment.
△ Less
Submitted 2 March, 2018;
originally announced March 2018.
-
Sensing adsorption kinetics through slip velocity measurements of polymer melts
Authors:
Marceau Hénot,
Éric Drockenmuller,
Liliane Léger,
Frédéric Restagno
Abstract:
The evolution over time of the non-linear slip behavior of a polydimethylsiloxane (PDMS) polymer melt on a weakly adsorbing surface made of short non-entangled PDMS chains densely end-grafted to the surface of a fused silica prism has been measured. The critical shear rate at which the melt enters the nonlinear slip regime has been shown to increase with time. The adsorption kinetics of the melt o…
▽ More
The evolution over time of the non-linear slip behavior of a polydimethylsiloxane (PDMS) polymer melt on a weakly adsorbing surface made of short non-entangled PDMS chains densely end-grafted to the surface of a fused silica prism has been measured. The critical shear rate at which the melt enters the nonlinear slip regime has been shown to increase with time. The adsorption kinetics of the melt on the same surface has been determined independently using ellipsometry. We show that the evolution of slip can be explained by the slow adsorption of melt chains using the Brochard-de Gennes's model.
△ Less
Submitted 25 June, 2018; v1 submitted 2 February, 2018;
originally announced February 2018.
-
Friction of polymers: from PDMS melts to PDMS elastomers
Authors:
Marceau Hénot,
Eric Drockenmuller,
Liliane Léger,
Frédéric Restagno
Abstract:
The slip behavior of polydimethylsiloxane (PDMS) polymer melts flowing on non-adsorbing surfaces made of short non-entangled PDMS chains densely end-grafted to silica has been characterized. For high enough shear rates, constant slip lengths proportional to the bulk fluid viscosity have been observed, in agreement with Navier's interfacial equation, and demonstrating that the interfacial Navier's…
▽ More
The slip behavior of polydimethylsiloxane (PDMS) polymer melts flowing on non-adsorbing surfaces made of short non-entangled PDMS chains densely end-grafted to silica has been characterized. For high enough shear rates, constant slip lengths proportional to the bulk fluid viscosity have been observed, in agreement with Navier's interfacial equation, and demonstrating that the interfacial Navier's friction coefficient is a local quantity, independent of the polymer molecular weight. Comparing the interfacial shear stresses deduced from these measured slip lengths to available friction stress measured for crosslinked PDMS elastomers, we directly compared the interfacial melt or elastomer friction coefficient to the monomer-monomer friction.
△ Less
Submitted 19 December, 2017; v1 submitted 10 April, 2017;
originally announced April 2017.
-
Polymer brush collapse under shear flow
Authors:
Airidas Korolkovas,
Cesar Rodriguez-Emmenegger,
Andres de los Santos Pereira,
Alexis Chennevière,
Frédéric Restagno,
Maximilian Wolff,
Franz A. Adlmann,
Andrew J. C. Dennison,
Philipp Gutfreund
Abstract:
Shear responsive surfaces offer potential advances in a number of applications. Surface functionalisation using polymer brushes is one route to such properties, particularly in the case of entangled polymers. We report on neutron reflectometry measurements of polymer brushes in entangled polymer solutions performed under controlled shear, as well as coarse-grained computer simulations correspondin…
▽ More
Shear responsive surfaces offer potential advances in a number of applications. Surface functionalisation using polymer brushes is one route to such properties, particularly in the case of entangled polymers. We report on neutron reflectometry measurements of polymer brushes in entangled polymer solutions performed under controlled shear, as well as coarse-grained computer simulations corresponding to these interfaces. Here we show a reversible and reproducible collapse of the brushes, increasing with the shear rate. Using two brushes of greatly different chain lengths and grafting densities, we demonstrate that the dynamics responsible for the structural change of the brush are governed by the free chains in solution rather than the brush itself, within the range of parameters examined. The phenomenon of the brush collapse could find applications in the tailoring of nanosensors, and as a way to dynamically control surface friction and adhesion.
△ Less
Submitted 7 February, 2017;
originally announced February 2017.
-
The break-up of free films pulled out of a pure liquid bath
Authors:
Lorène Champougny,
Emmanuelle Rio,
Frédéric Restagno,
Benoit Scheid
Abstract:
In this paper, we derive a lubrication model to describe the non-stationary free liquid film that is created when a vertical frame is pulled out of a liquid reservoir at a given velocity. We here focus on the case of a pure liquid, corresponding to a stress-free boundary condition at the liquid/air interfaces of the film, and thus employ an essentially extensional description of the flow. Taking i…
▽ More
In this paper, we derive a lubrication model to describe the non-stationary free liquid film that is created when a vertical frame is pulled out of a liquid reservoir at a given velocity. We here focus on the case of a pure liquid, corresponding to a stress-free boundary condition at the liquid/air interfaces of the film, and thus employ an essentially extensional description of the flow. Taking into account van der Waals interactions between the interfaces, we observe that film rupture is well-defined in time as well as in space, which allows us to compute the critical thickness and the film height at the moment of rupture. The theoretical predictions of the model turn out to be in quantitative agreement with experimental measurements of the break-up height of silicone oil films in a wide range of pulling velocities and supporting fiber diameters.
△ Less
Submitted 10 January, 2017;
originally announced January 2017.
-
Stress concentration in periodically rough hertzian contact: Hertz to soft-flat-punch transition
Authors:
Rene Ledesma-Alonso,
Elie Raphael,
Liliane Leger,
Frederic Restagno,
Christophe Poulard
Abstract:
We report on the elastic contact between a spherical lens and a patterned substrate, composed of an hexagonal lattice of cylindrical pillars. The stress field and the size of the contact area are obtained by means of numerical methods (discrete Green's function superposition and iterative bisection-like methods). For small indentations, a transition from a Hertzian to a Boussinesq-Cerruti-like beh…
▽ More
We report on the elastic contact between a spherical lens and a patterned substrate, composed of an hexagonal lattice of cylindrical pillars. The stress field and the size of the contact area are obtained by means of numerical methods (discrete Green's function superposition and iterative bisection-like methods). For small indentations, a transition from a Hertzian to a Boussinesq-Cerruti-like behavior is observed when the surface fraction of the substrate that is covered by pillars is increased. In particular, we present a master curve defined by two dimensionless parameters, which allows to predict the stress at the center of contact region in terms of the surface fraction occupied by pillars. The transition between the limiting contact regimes, Hertzian and Boussinesq-Cerruti-like, is well described by a rational function. Additionally, a simple model to describe the Boussines-Cerruti-like contact between the lens and a single elastic pillar, which takes into account the pillar geometry and the elastic properties of the two bodies, is presented.
△ Less
Submitted 1 July, 2016; v1 submitted 1 April, 2016;
originally announced April 2016.
-
Self-amplification of solid friction in interleaved assemblies
Authors:
Hector Alarcon,
Thomas Salez,
Christophe Poulard,
Jean-Francis Bloch,
Elie Raphael,
Kari Dalnoki-Veress,
Frederic Restagno
Abstract:
It is nearly impossible to separate two interleaved phonebooks when held by their spines. A full understanding of this astonishing demonstration of solid friction in complex assemblies has remained elusive. In this Letter, we report on experiments with controlled booklets and show that the force required increases sharply with the number of sheets. A model captures the effect of the number of shee…
▽ More
It is nearly impossible to separate two interleaved phonebooks when held by their spines. A full understanding of this astonishing demonstration of solid friction in complex assemblies has remained elusive. In this Letter, we report on experiments with controlled booklets and show that the force required increases sharply with the number of sheets. A model captures the effect of the number of sheets, their thickness and the overlap** distance. Furthermore, the data collapse onto a self-similar master curve with one dimensionless amplification parameter. In addition to solving a long-standing familiar enigma, this model system provides a framework with which one can accurately measure friction forces and coefficients at low loads, and that has relevance to complex assemblies from the macro to the nanoscale.
△ Less
Submitted 17 December, 2015; v1 submitted 13 August, 2015;
originally announced August 2015.
-
Surfactant-induced rigidity of interfaces: a unified approach to free and dip-coated films
Authors:
Lorène Champougny,
Benoit Scheid,
Frédéric Restagno,
Jan Vermant,
Emmanuelle Rio
Abstract:
The behavior of thin liquid films is known to be strongly affected by the presence of surfactants at the interfaces. The detailed mechanism by which the latter enhance film stability is still a matter of debate, in particular concerning the influence of surface elastic effects on the hydrodynamic boundary condition at the liquid/air interfaces. In the present work, "twin" hydrodynamic models negle…
▽ More
The behavior of thin liquid films is known to be strongly affected by the presence of surfactants at the interfaces. The detailed mechanism by which the latter enhance film stability is still a matter of debate, in particular concerning the influence of surface elastic effects on the hydrodynamic boundary condition at the liquid/air interfaces. In the present work, "twin" hydrodynamic models neglecting surfactant transport to the interfaces are proposed to describe the coating of films onto a solid plate (Landau-Levich-Derjaguin configuration) as well as soap film pulling (Frankel configuration). Experimental data on the entrained film thickness in both configurations can be fitted very well using a single value of the surface elasticity, which is in good agreement with independent measurements by mean of surface expansion experiments in a Langmuir through. The analysis shows how and when the soap films or dip coating experiments may be used to precisely and sensitively measure the surface elasticity of surfactant solutions.
△ Less
Submitted 1 December, 2014; v1 submitted 19 February, 2014;
originally announced February 2014.
-
Transition from Cassie to Wenzel state in patterned soft elastomer sliding contacts
Authors:
Élise Degrandi-Contraires,
Christophe Poulard,
Frédéric Restagno,
Raphaël Weil,
Liliane Léger
Abstract:
In this paper, we presented an experimental and theoretical analysis of the formation of the contact between a smooth elastomer lens and an elastomer substrate micropatterned with hexagonal arrays of cylindrical pillars. We show using a JKR model coupled with a full description of the deformation of the substrate between the pillars that the transition between the top to the full contact is obtain…
▽ More
In this paper, we presented an experimental and theoretical analysis of the formation of the contact between a smooth elastomer lens and an elastomer substrate micropatterned with hexagonal arrays of cylindrical pillars. We show using a JKR model coupled with a full description of the deformation of the substrate between the pillars that the transition between the top to the full contact is obtain when the normal load is increased above a well predicted threshold. We have also shown that above the onset of full contact, the evolution of the area of full contact was obeying a simple scaling.
△ Less
Submitted 9 January, 2012;
originally announced January 2012.
-
Dynamical thickening transition in plate coating with concentrated surfactant solutions
Authors:
Jérôme Delacotte,
Lorraine Montel,
Frédéric Restagno,
Benoît Scheid,
Benjamin Dollet,
Howard A. Stone,
Dominique Langevin,
Emmanuelle Rio
Abstract:
We present a large range of experimental data concerning the influence of surfactants on the well-known Landau-Levich-Derjaguin experiment where a liquid film is generated by pulling a solid plate out of a bath. The thickness h of the film was measured as a function of the pulling velocity V for different kind of surfactant and at various concentrations. Measuring the thickening factor…
▽ More
We present a large range of experimental data concerning the influence of surfactants on the well-known Landau-Levich-Derjaguin experiment where a liquid film is generated by pulling a solid plate out of a bath. The thickness h of the film was measured as a function of the pulling velocity V for different kind of surfactant and at various concentrations. Measuring the thickening factor $α=h/h_{LLD}$, where hLLD is obtained for a pure liquid, in a wide range of capillary ($Ca=ηV/γ$), two regimes of constant thickening can be identified: at small capillary number, $α$ is large due to a confinement and surface elasticity (or Marangoni) effects and at large Ca, $α$ is slightly higher than unity, due to surface viscous effects. At intermediate Ca, $α$ decreases as Ca increases along a "dynamic transition". In the case of non-ionic surfactants, the dynamic transition occurs at a fixed Ca, independently of the surfactant concentration, while for ionic surfactants, the dynamic transition depends on the concentration due to the existence of an electrostatic barrier. The control of physico-chemical parameters allowed us to elucidate the nature of the dynamic transition and to relate it to surface rheology.
△ Less
Submitted 10 June, 2011;
originally announced June 2011.
-
Mechanical tunning of adhesion through micro-patterning of elastic surfaces
Authors:
Christophe Poulard,
Frédéric Restagno,
Raphaël Weil,
Liliane Léger
Abstract:
We present an investigation of the role of micropatterning on adhesion properties at soft deformable polydimethylsiloxane (PDMS)/ acrylic adhesive interfaces. Contrary to what has been observed for low aspect ratio rigid patterns, where the adhesion enhancement was found to only result from the increase of interfacial area due to patterning, we show that for soft elastic arrays of cylindrical pill…
▽ More
We present an investigation of the role of micropatterning on adhesion properties at soft deformable polydimethylsiloxane (PDMS)/ acrylic adhesive interfaces. Contrary to what has been observed for low aspect ratio rigid patterns, where the adhesion enhancement was found to only result from the increase of interfacial area due to patterning, we show that for soft elastic arrays of cylindrical pillars, the elastic deformation of the patterns can lead to noticeable extra adhesion increase. The effect of the geometrical characteristics of the patterning for hexagonal arrays of PDMS micropillars on the adhesion energy are presented. We show that varying the size of the pattern allows one to tune the adhesion energy, and that this adhesion enhancement saturates when the pillars become too close to each other, due a coupling of the elastic deformation fields inside the underlying substrate. A mechanical model has been developed and found in good quantitative agreement with experimental data, with as unique fitting parameter the rupture criteria for the adhesive on the top of the pillars. Such a rupture a rupture criteria can thus be extracted from systematic experiments on controlled patterned surfaces. This criteria remain sensitive to the chemistry of the surfaces.
△ Less
Submitted 27 September, 2010;
originally announced September 2010.
-
Capillary Bridge Formation and Breakage: A Test to Characterize Antiadhesive Surfaces
Authors:
Laurianne Vagharchakian,
Frederic Restagno,
Liliane Leger
Abstract:
In order to characterize very weak adhesive surfaces, we have developed a quantitative test inspired by the Johnson, Kendall, and Roberts adhesion test for soft adhesives, which relies on the formation and then the rupture of a capillary bridge between the surface to be tested and a liquid bath. Both the shape and the kinetics of breakage of the capillary bridge for various coatings put into con…
▽ More
In order to characterize very weak adhesive surfaces, we have developed a quantitative test inspired by the Johnson, Kendall, and Roberts adhesion test for soft adhesives, which relies on the formation and then the rupture of a capillary bridge between the surface to be tested and a liquid bath. Both the shape and the kinetics of breakage of the capillary bridge for various coatings put into contact with liquids of various viscosities and surface tensions have been studied. Several pull off regimes can be distinguished. For low pull off velocities, a quasi-static regime is observed, well described by capillary equations and sensitive to the hysteresis of the contact angle of the fluid on the coating. Above a critical pull off velocity that depends on the fluid viscosity, a dynamic regime is observed, characterized by the formation of a flat pancake of fluid on the coating that recedes more slowly than the capillary bridge itself. After the breakage of the capillary bridge, a small drop can remain attached to the surface. The volume of this drop depends on the dynamical regime and is strongly affected by very small differences between the coatings. The aptitude of this test in characterizing very weakly adhesive surfaces is exemplified by a comparison between three different perfluorinated coatings.
△ Less
Submitted 7 April, 2009;
originally announced April 2009.
-
Fracture of a viscous liquid
Authors:
Frederic Restagno,
Elise Lorenceau,
David Quere
Abstract:
When a viscous liquid hits a pool of liquid of same nature, the impact region is hollowed by the shock. Its bottom becomes extremely sharp if increasing the impact velocity, and we report that the curvature at that place increases exponentially with the flow velocity, in agreement with a theory by Jeong and Moffatt. Such a law defines a characteristic velocity for the collapse of the tip, which…
▽ More
When a viscous liquid hits a pool of liquid of same nature, the impact region is hollowed by the shock. Its bottom becomes extremely sharp if increasing the impact velocity, and we report that the curvature at that place increases exponentially with the flow velocity, in agreement with a theory by Jeong and Moffatt. Such a law defines a characteristic velocity for the collapse of the tip, which explains both the cusp-like shape of this region, and the instability of the cusp if increasing (slightly) the impact velocity. Then, a film of the upper phase is entrained inside the pool. We characterize the critical velocity of entrainment of this phase and compare our results with recent predictions by Eggers.
△ Less
Submitted 2 April, 2003;
originally announced April 2003.
-
Where does a cohesive granular heap break?
Authors:
L. Bocquet,
F. Restagno,
E. Charlaix
Abstract:
In this paper, we consider the effect of cohesion on the stability of a granular heap. We first briefly review literature results on the cohesion force between two rough granular beads and specifically consider the dependence of the adhesion force on the normal load. We then compute the dependence of the maximum angle of stability of the heap as a function of the cohesion. We point out that the…
▽ More
In this paper, we consider the effect of cohesion on the stability of a granular heap. We first briefly review literature results on the cohesion force between two rough granular beads and specifically consider the dependence of the adhesion force on the normal load. We then compute the dependence of the maximum angle of stability of the heap as a function of the cohesion. We point out that the dependence of the cohesive forces on the external normal load between grains is a key point in determining the localization of the failure plane. While for a constant cohesive force, slip occurs deep inside the heap, surface failure is obtained for a linear dependence of the cohesion on the normal stress.
△ Less
Submitted 31 July, 2003; v1 submitted 24 February, 2003;
originally announced February 2003.
-
Nanorheology : an Investigation of the Boundary Condition at Hydrophobic and Hydrophilic Interfaces
Authors:
C. Cottin-Bizonne,
S. Jurine,
J. Baudry,
J. Crassous,
F. Restagno,
Charlaix
Abstract:
t has been shown that the flow of a simple liquid over a solid surface can violate the so-called no-slip boundary condition. We investigate the flow of polar liquids, water and glycerol, on a hydrophilic Pyrex surface and a hydrophobic surface made of a Self-Assembled Monolayer of OTS (octadecyltrichlorosilane) on Pyrex. We use a Dynamic Surface Force Apparatus (DSFA) which allows one to study t…
▽ More
t has been shown that the flow of a simple liquid over a solid surface can violate the so-called no-slip boundary condition. We investigate the flow of polar liquids, water and glycerol, on a hydrophilic Pyrex surface and a hydrophobic surface made of a Self-Assembled Monolayer of OTS (octadecyltrichlorosilane) on Pyrex. We use a Dynamic Surface Force Apparatus (DSFA) which allows one to study the flow of a liquid film confined between two surfaces with a nanometer resolution. No-slip boundary conditions are found for both fluids on hydrophilic surfaces only. Significant slip is found on the hydrophobic surfaces, with a typical length of one hundred nanometers.
△ Less
Submitted 8 October, 2002;
originally announced October 2002.
-
Aging in humid granular media
Authors:
F. Restagno,
C. Ursini,
H. Gayvallet,
E. Charlaix
Abstract:
Aging behavior is an important effect in the friction properties of solid surfaces. In this paper we investigate the temporal evolution of the static properties of a granular medium by studying the aging over time of the maximum stability angle of submillimetric glass beads. We report the effect of several parameters on these aging properties, such as the wear on the beads, the stress during the…
▽ More
Aging behavior is an important effect in the friction properties of solid surfaces. In this paper we investigate the temporal evolution of the static properties of a granular medium by studying the aging over time of the maximum stability angle of submillimetric glass beads. We report the effect of several parameters on these aging properties, such as the wear on the beads, the stress during the resting period, and the humidity content of the atmosphere. Aging effects in an ethanol atmosphere are also studied. These experimental results are discussed at the end of the paper.
△ Less
Submitted 9 September, 2002;
originally announced September 2002.
-
Slow Kinetics of Capillary Condensation in Confined Geometry: Experiment and Theory
Authors:
F. Restagno,
L. Bocquet,
J. Crassous,
E. Charlaix
Abstract:
When two solid surfaces are brought in contact, water vapor present in the ambient air may condense in the region of the contact to form a liquid bridge connecting the two surfaces : this is the so-called capillary condensation. This phenomenon has drastic consequences on the contact between solids, modifying the macroscopic adhesion and friction properties. In this paper, we present a survey of…
▽ More
When two solid surfaces are brought in contact, water vapor present in the ambient air may condense in the region of the contact to form a liquid bridge connecting the two surfaces : this is the so-called capillary condensation. This phenomenon has drastic consequences on the contact between solids, modifying the macroscopic adhesion and friction properties. In this paper, we present a survey of the work we have performed both experimentally and theoretically to understand the microscopic foundations of the kinetics of capillary condensation. From the theoretical point of view, we have computed the free energy barrier associated with the condensation of the liquid from the gas in a confined system. These calculations allow to understand the existence of very large hysteresis, which is often associated with capillary condensation. This results are compatible with experimental results obtained with a surface forces apparatus in a vapor atmosphere, showing a large hysteris of the surface energy of two parallel planes as a function of their distance. In the second part, we present some experiments on the influence of humidity on the avalanche angle of granular media. We show that the ageing in time of this avalanche angle can be explained by the slow kinetics of capillary condensation in a random confined geometry.
△ Less
Submitted 4 September, 2001;
originally announced September 2001.
-
A new capacitive sensor for displacement measurement in a surface force apparatus
Authors:
F. Restagno,
J. Crassous,
E. Charlaix,
M. Monchanin
Abstract:
We present a new capacitive sensor for displacement measurement in a Surface Forces Apparatus (SFA) which allows dynamical measurements in the range of 0-100 Hz. This sensor measures the relative displacement between two macroscopic opaque surfaces over periods of time ranging from milliseconds to in principle an indefinite period, at a very low price and down to atomic resolution. It consists o…
▽ More
We present a new capacitive sensor for displacement measurement in a Surface Forces Apparatus (SFA) which allows dynamical measurements in the range of 0-100 Hz. This sensor measures the relative displacement between two macroscopic opaque surfaces over periods of time ranging from milliseconds to in principle an indefinite period, at a very low price and down to atomic resolution. It consists of a plane capacitor, a high frequency oscillator, and a high sensitivity frequency to voltage conversion. We use this sensor to study the nanorheological properties of dodecane confined between glass surfaces.
△ Less
Submitted 13 February, 2001;
originally announced February 2001.
-
Humidity Effects and Aging Behavior in Granular Media
Authors:
F. Restagno,
H. Gayvallet,
L. Bocquet,
E. Charlaix
Abstract:
We present a study of humidity effects on the maximum stability angle in granular media. We show that a granular medium of small glass beads exhibits aging properties : the first avalanche angle increases logarithmically with the resting time of the pile. This aging behavior is found to depend on the relative humidity of the surrounding atmosphere. A short interpretation of this effect, based on…
▽ More
We present a study of humidity effects on the maximum stability angle in granular media. We show that a granular medium of small glass beads exhibits aging properties : the first avalanche angle increases logarithmically with the resting time of the pile. This aging behavior is found to depend on the relative humidity of the surrounding atmosphere. A short interpretation of this effect, based on a model of activated capillary condensation, is proposed.
△ Less
Submitted 10 August, 1999;
originally announced August 1999.
-
Thermally Activated Dynamics of the Capillary Condensation
Authors:
F. Restagno,
L. Bocquet,
T. Biben,
E. Charlaix
Abstract:
This paper is devoted to the thermally activated dynamics of the capillary condensation. We present a simple model which enables us to identify the critical nucleus involved in the transition mechanism. This simple model is then applied to calculate the nucleation barrier from which we can obtain informations on the nucleation time. We present a simple estimation of the nucleation barrier in sla…
▽ More
This paper is devoted to the thermally activated dynamics of the capillary condensation. We present a simple model which enables us to identify the critical nucleus involved in the transition mechanism. This simple model is then applied to calculate the nucleation barrier from which we can obtain informations on the nucleation time. We present a simple estimation of the nucleation barrier in slab geometry both in the two dimensional case and in the three dimensional case. We extend the model in the case of rough surfaces which is closer to the experimental case and allows comparison with experimental datas.
△ Less
Submitted 10 August, 1999;
originally announced August 1999.
-
Nucleation Theory for Capillary Condensation
Authors:
Lydéric Bocquet,
Frédéric Restagno,
Thierry Biben
Abstract:
This paper is devoted to the thermally activated dynamics of the capillary condensation. We present a simple model which enables us to identify the critical nucleus involved in the transition mechanism. This simple model is then applied to calculate the nucleation barrier from which we can obtain informations on the nucleation time. These results are compared to the numerical simulation of a Lan…
▽ More
This paper is devoted to the thermally activated dynamics of the capillary condensation. We present a simple model which enables us to identify the critical nucleus involved in the transition mechanism. This simple model is then applied to calculate the nucleation barrier from which we can obtain informations on the nucleation time. These results are compared to the numerical simulation of a Landau-Ginzburg model for the liquid-vapor interface combined with a Langevin dynamics.
△ Less
Submitted 19 January, 1999;
originally announced January 1999.