-
MARS-MD: rejection based image domain material decomposition
Authors:
C. J. Bateman,
D. Knight,
B. Brandwacht,
J. Mc Mahon,
J. Healy,
R. Panta,
R. Aamir,
K. Rajendran,
M. Moghiseh,
M. Ramyar,
D. Rundle,
J. Bennett,
N. de Ruiter,
D. Smithies,
S. T. Bell,
R. Doesburg,
A. Chernoglazov,
V. B. H. Mandalika,
M. Walsh,
M. Shamshad,
M. Anjomrouz,
A. Atharifard,
L. Vanden Broeke,
S. Bheesette,
T. Kirkbride
, et al. (6 additional authors not shown)
Abstract:
This paper outlines image domain material decomposition algorithms that have been routinely used in MARS spectral CT systems. These algorithms (known collectively as MARS-MD) are based on a pragmatic heuristic for solving the under-determined problem where there are more materials than energy bins. This heuristic contains three parts: (1) splitting the problem into a number of possible sub-problem…
▽ More
This paper outlines image domain material decomposition algorithms that have been routinely used in MARS spectral CT systems. These algorithms (known collectively as MARS-MD) are based on a pragmatic heuristic for solving the under-determined problem where there are more materials than energy bins. This heuristic contains three parts: (1) splitting the problem into a number of possible sub-problems, each containing fewer materials; (2) solving each sub-problem; and (3) applying rejection criteria to eliminate all but one sub-problem's solution. An advantage of this process is that different constraints can be applied to each sub-problem if necessary. In addition, the result of this process is that solutions will be sparse in the material domain, which reduces crossover of signal between material images. Two algorithms based on this process are presented: the Segmentation variant, which uses segmented material classes to define each sub-problem; and the Angular Rejection variant, which defines the rejection criteria using the angle between reconstructed attenuation vectors.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
The Hidden K-edge Signal in K-edge Imaging
Authors:
Christopher J. Bateman,
Kishore Rajendran,
Niels J. A. de Ruiter,
Anthony P. Butler,
Philip H. Butler,
Peter F. Renaud
Abstract:
K-edge imaging is commonly used for viewing contrast pharmaceuticals in a variety of multi-energy x-ray imaging techniques, ranging from dual-energy and spectral computed tomography to fluoroscopy. When looking for the K-edge signal of a specific contrast, by taking measurements either side of the K-edge, it is found that the K-edge is not always observable for low concentrations. We have also obs…
▽ More
K-edge imaging is commonly used for viewing contrast pharmaceuticals in a variety of multi-energy x-ray imaging techniques, ranging from dual-energy and spectral computed tomography to fluoroscopy. When looking for the K-edge signal of a specific contrast, by taking measurements either side of the K-edge, it is found that the K-edge is not always observable for low concentrations. We have also observed that the ability to see the K-edge is unit dependent - a K-edge that is not observable in computed tomography (CT) reconstructed linear attenuation units can often be made visible by converting to Hounsfield units.
This paper presents an investigation of this K-edge hiding phenomenon. We conclude that if a multi-energy x-ray measurement of any K-edge material contains a signal of any other material, then there will be a positive concentration of that K-edge material below which its K-edge cannot be observed without extracting the K-edge signal through means of basis decomposition. Mathematical descriptions of this limiting minimum concentration is provided in three cases - multi-energy radiographic projection images; and reconstructed multi-energy CT images for both linear attenuation and Hounsfield units. Two important properties of this limiting concentration are provided: the minimum concentration for Hounsfield units is always strictly less than the minimum concentration for linear attenuation; and the minimum concentration for radiographic projections will typically be much larger than the minimum concentration for reconstructed linear attenuation. Finally experimental observation of this phenomenon is presented using data collected by the MARS spectral CT scanner equipped with a CdTe Medipix-3RX camera operating in charge-summing mode, where it is also shown that the K-edge can be recovered through basis decomposition.
△ Less
Submitted 13 June, 2015;
originally announced June 2015.
-
Reducing beam hardening effects and metal artefacts using Medipix3RX: With applications from biomaterial science
Authors:
K. Rajendran,
M. F. Walsh,
N. J. A. de Ruiter,
A. I. Chernoglazov,
R. K. Panta,
A. P. H. Butler,
P. H. Butler,
S. T. Bell,
N. G. Anderson,
T. B. F. Woodfield,
S. J. Tredinnick,
J. L. Healy,
C. J. Bateman,
R. Aamir,
R. M. N. Doesburg,
P. F. Renaud,
S. P. Gieseg,
D. J. Smithies,
J. L. Mohr,
V. B. H. Mandalika,
A. M. T. Opie,
N. J. Cook,
J. P. Ronaldson,
S. J. Nik,
A. Atharifard
, et al. (6 additional authors not shown)
Abstract:
This paper discusses methods for reducing beam hardening effects using spectral data for biomaterial applications. A small-animal spectral scanner operating in the diagnostic energy range was used. We investigate the use of photon-processing features of the Medipix3RX ASIC in reducing beam hardening and associated artefacts. A fully operational charge summing mode was used during the imaging routi…
▽ More
This paper discusses methods for reducing beam hardening effects using spectral data for biomaterial applications. A small-animal spectral scanner operating in the diagnostic energy range was used. We investigate the use of photon-processing features of the Medipix3RX ASIC in reducing beam hardening and associated artefacts. A fully operational charge summing mode was used during the imaging routine. We present spectral data collected for metal alloy samples, its analysis using algebraic 3D reconstruction software and volume visualisation using a custom volume rendering software. Narrow high energy acquisition using the photon-processing detector revealed substantial reduction in beam hardening effects and metal artefacts.
△ Less
Submitted 20 November, 2013;
originally announced November 2013.
-
MARS spectral molecular imaging of lamb tissue: data collection and image analysis
Authors:
R Aamir,
A Chernoglazov,
C J Bateman,
A P H Butler,
P H Butler,
N G Anderson,
S T Bell,
R K Panta,
J L Healy,
J L Mohr,
K Rajendran,
M F Walsh,
N de Ruiter,
S P Gieseg,
T Woodfield,
P F Renaud,
L Brooke,
S Abdul-Majid,
M Clyne,
R Glendenning,
P J Bones,
M Billinghurst,
C Bartneck,
H Mandalika,
R Grasset
, et al. (13 additional authors not shown)
Abstract:
Spectral molecular imaging is a new imaging technique able to discriminate and quantify different components of tissue simultaneously at high spatial and high energy resolution. Our MARS scanner is an x-ray based small animal CT system designed to be used in the diagnostic energy range (20 to 140 keV). In this paper, we demonstrate the use of the MARS scanner, equipped with the Medipix3RX spectros…
▽ More
Spectral molecular imaging is a new imaging technique able to discriminate and quantify different components of tissue simultaneously at high spatial and high energy resolution. Our MARS scanner is an x-ray based small animal CT system designed to be used in the diagnostic energy range (20 to 140 keV). In this paper, we demonstrate the use of the MARS scanner, equipped with the Medipix3RX spectroscopic photon-processing detector, to discriminate fat, calcium, and water in tissue. We present data collected from a sample of lamb meat including bone as an illustrative example of human tissue imaging. The data is analyzed using our 3D Algebraic Reconstruction Algorithm (MARS-ART) and by material decomposition based on a constrained linear least squares algorithm. The results presented here clearly show the quantification of lipid-like, water-like and bone-like components of tissue. However, it is also clear to us that better algorithms could extract more information of clinical interest from our data. Because we are one of the first to present data from multi-energy photon-processing small animal CT systems, we make the raw, partial and fully processed data available with the intention that others can analyze it using their familiar routines. The raw, partially processed and fully processed data of lamb tissue along with the phantom calibration data can be found at [http://hdl.handle.net/10092/8531].
△ Less
Submitted 23 January, 2014; v1 submitted 18 November, 2013;
originally announced November 2013.
-
A fields only version of the Lorentz Force Law: Particles replaced by their fields
Authors:
Philip H. Butler,
Niels G. Gresnigt,
Martin B. van der Mark,
Peter F. Renaud
Abstract:
We show that the Lorentz force law, F^L_1=q_1(E+v_1xB) being the charge on particle 1 interacting with the electromagnetic fields due to all other particles, can be written in a pure field form F^L_1=-\nabla_1 U^{EM}. In this expression U^{EM} is the total electromagnetic energy of the system of particle 1 and all other particles. In deriving this result we review the old but not widely known resu…
▽ More
We show that the Lorentz force law, F^L_1=q_1(E+v_1xB) being the charge on particle 1 interacting with the electromagnetic fields due to all other particles, can be written in a pure field form F^L_1=-\nabla_1 U^{EM}. In this expression U^{EM} is the total electromagnetic energy of the system of particle 1 and all other particles. In deriving this result we review the old but not widely known results that Maxwell's equations follow uniquely from Special Relativity, and that the Lorentz force law follows from applying Hamilton's variational principle to this result.
For a two particle system, the standard view is that the electromagnetic force on particle 1 is the result of the charge of particle 1 interacting locally with the field of particle 2, and conversely. Both charges 1 and 2, and fields 1 and 2 are needed. In our approach, the fields of all particles contribute to the electromagnetic interaction everywhere, over all of space. The charges of the particles do not enter the theory except incidentally, via Gauss's law. This has novel interpretational consequences. In particular, it allows a charged particle to be replaced by its electric and magnetic fields, much as a particle in quantum mechanics is replaced by its complex valued wavefunction.
△ Less
Submitted 20 November, 2012;
originally announced November 2012.
-
Assumptions and Axioms: Mathematical Structures to Describe the Physics of Rigid Bodies
Authors:
Philip H. Butler,
Niels G. Gresnigt,
Peter F. Renaud
Abstract:
This paper challenges some of the common assumptions underlying the mathematics used to describe the physical world. We start by reviewing many of the assumptions underlying the concepts of real, physical, rigid bodies and the translational and rotational properties of such rigid bodies. Nearly all elementary and advanced texts make physical assumptions that are subtly different from ours, and as…
▽ More
This paper challenges some of the common assumptions underlying the mathematics used to describe the physical world. We start by reviewing many of the assumptions underlying the concepts of real, physical, rigid bodies and the translational and rotational properties of such rigid bodies. Nearly all elementary and advanced texts make physical assumptions that are subtly different from ours, and as a result we develop a mathematical description that is subtly different from the standard mathematical structure. Using the homogeneity and isotropy of space, we investigate the translational and rotational features of rigid bodies in two and three dimensions. We find that the concept of rigid bodies and the concept of the homogeneity of space are intrinsically linked. The geometric study of rotations of rigid objects leads to a geometric product relationship for lines and vectors. By requiring this product to be both associative and to satisfy Pythagoras' theorem, we obtain a choice of Clifford algebras. We extend our arguments from space to include time. By assuming that ct=l and rewriting this in Lorentz invariant form as c^2t^2-x^2-y^2-z^2=0 we obtain a generalization of Pythagoras to spacetime. This leads us directly to establishing that the Clifford algebra CL(1,3) is an appropriate mathematical structure to describe spacetime. Clifford algebras are not division algebras. We show that the existence of non-invertible elements in the algebra is not a limitation of the usefulness to physics of the algebra but rather that it reflects accurately the spacetime properties of physical systems.
△ Less
Submitted 5 May, 2010;
originally announced May 2010.
-
The Stabilized Poincare-Heisenberg algebra: a Clifford algebra viewpoint
Authors:
N. G. Gresnigt,
P. F. Renaud,
P. H. Butler
Abstract:
The stabilized Poincare-Heisenberg algebra (SPHA) is the Lie algebra of quantum relativistic kinematics generated by fifteen generators. It is obtained from imposing stability conditions after attempting to combine the Lie algebras of quantum mechanics and relativity which by themselves are stable, however not when combined. In this paper we show how the sixteen dimensional Clifford algebra CL(1…
▽ More
The stabilized Poincare-Heisenberg algebra (SPHA) is the Lie algebra of quantum relativistic kinematics generated by fifteen generators. It is obtained from imposing stability conditions after attempting to combine the Lie algebras of quantum mechanics and relativity which by themselves are stable, however not when combined. In this paper we show how the sixteen dimensional Clifford algebra CL(1,3) can be used to generate the SPHA. The Clifford algebra path to the SPHA avoids the traditional stability considerations, relying instead on the fact that CL(1,3) is a semi-simple algebra and therefore stable. It is therefore conceptually easier and more straightforward to work with a Clifford algebra. The Clifford algebra path suggests the next evolutionary step toward a theory of physics at the interface of GR and QM might be to depart from working in space-time and instead to work in space-time-momentum.
△ Less
Submitted 2 November, 2006;
originally announced November 2006.