Showing 1–50 of 116 results for author: Reis, D A

Effective medium theory for the electrical conductance of random resistor networks which mimic crack-template-based transparent conductive films

Authors: Yuri Yu. Tarasevich, Irina V. Vodolazskaya, Andrei V. Eserkepov, Fábio D. A. Aarão Reis

Abstract: We studied random resistor networks produced with regular structure and random distribution of edge conductances. These networks are intended to mimic crack-template-based transparent conductive films as well some random networks produced using nano-imprinting technology. Applying an effective medium theory, we found out that the electrical conductance of such networks is… ▽ More We studied random resistor networks produced with regular structure and random distribution of edge conductances. These networks are intended to mimic crack-template-based transparent conductive films as well some random networks produced using nano-imprinting technology. Applying an effective medium theory, we found out that the electrical conductance of such networks is $\approx 0.5852 \sqrt{n_E}$, where $n_E$ is the number density of conductive edges. This dependence is in agreement with numerical calculations in Voronoi networks, although the effective conductances are approximately 15\% larger. △ Less

Submitted 21 June, 2024; v1 submitted 15 March, 2024; originally announced March 2024.

Comments: 7 pages, 4 figures, 1 table, 68 references

Ultrafast lattice disordering can be accelerated by electronic collisional forces

Authors: Gilberto A. de la Pena Munoz, Alfredo A. Correa, Shan Yang, Olivier Delaire, Yi**g Huang, Allan S. Johnson, Tetsuo Katayama, Viktor Krapivin, Ernest Pastor, David A. Reis, Samuel Teitelbaum, Luciana Vidas, Simon Wall, Mariano Trigo

Abstract: In the prevalent picture of ultrafast structural phase transitions, the atomic motion occurs in a slowly varying potential energy surface determined adiabatically by the fast electrons. However, this ignores non-conservative forces caused by electron-lattice collisions, which can significantly influence atomic motion. Most ultrafast techniques only probe the average structure and are less sensitiv… ▽ More In the prevalent picture of ultrafast structural phase transitions, the atomic motion occurs in a slowly varying potential energy surface determined adiabatically by the fast electrons. However, this ignores non-conservative forces caused by electron-lattice collisions, which can significantly influence atomic motion. Most ultrafast techniques only probe the average structure and are less sensitive to random displacements, and therefore do not detect the role played by non-conservative forces in phase transitions. Here we show that the lattice dynamics of the prototypical insulator-to-metal transition of VO2 cannot be described by a potential energy alone. We use the sample temperature to control the preexisting lattice disorder before ultrafast photoexcitation across the phase transition and our ultrafast diffuse scattering experiments show that the fluctuations characteristic of the rutile metal develop equally fast (120 fs) at initial temperatures of 100 K and 300 K. This indicates that additional non-conservative forces are responsible for the increased lattice disorder. These results highlight the need for more sophisticated descriptions of ultrafast phenomena beyond the Born-Oppenheimer approximation as well as ultrafast probes of spatial fluctuations beyond the average unit cell measured by diffraction. △ Less

Submitted 20 February, 2024; originally announced February 2024.

Ultrafast measurements under anisotropic strain reveal near equivalence of competing charge orders in TbTe$_3$

Authors: Soyeun Kim, Gal Orenstein, Anisha G. Singh, Ian R. Fisher, David A. Reis, Mariano Trigo

Abstract: We report ultrafast reflectivity measurements of the dynamics of the order parameter of the charge density wave (CDW) in TbTe$_3$ under anisotropic strain. We observe an increase in the frequency of the amplitude mode with increasing tensile strain along the $a$-axis (which drives the lattice into $a>c$, with $a$ and $c$ the lattice constants), and similar behavior for tensile strain along $c$ (… ▽ More We report ultrafast reflectivity measurements of the dynamics of the order parameter of the charge density wave (CDW) in TbTe$_3$ under anisotropic strain. We observe an increase in the frequency of the amplitude mode with increasing tensile strain along the $a$-axis (which drives the lattice into $a>c$, with $a$ and $c$ the lattice constants), and similar behavior for tensile strain along $c$ ($c>a$). This suggests that both strains stabilize the corresponding CDW order and further support the near equivalence of the CDW phases oriented in $a$- and $c$-axis, in spite of the orthorhombic space group. The results were analyzed within the time-dependent Ginzburg-Landau framework, which agrees well with the reflectivity dynamics. △ Less

Submitted 9 May, 2024; v1 submitted 30 January, 2024; originally announced January 2024.

Comments: 7 pages, 4 figures

Hard X-ray Generation and Detection of Nanometer-Scale Localized Coherent Acoustic Wave Packets in SrTiO$_3$ and KTaO$_3$

Authors: Yi**g Huang, Peihao Sun, Samuel W. Teitelbaum, Haoyuan Li, Yanwen Sun, Nan Wang, Sanghoon Song, Takahiro Sato, Matthieu Chollet, Taito Osaka, Ichiro Inoue, Ryan A. Duncan, Hyun D. Shin, Johann Haber, **jian Zhou, Marco Bernardi, Mingqiang Gu, James M. Rondinelli, Mariano Trigo, Makina Yabashi, Alexei A. Maznev, Keith A. Nelson, Diling Zhu, David A. Reis

Abstract: We demonstrate that the absorption of femtosecond x-ray pulses can excite quasi-spherical high-wavevector coherent acoustic phonon wavepackets using an all x-ray pump and probe scattering experiment. The time- and momentum-resolved diffuse scattering signal is consistent with strain pulses induced by the rapid electron cascade dynamics following photoionization at uncorrelated excitation centers.… ▽ More We demonstrate that the absorption of femtosecond x-ray pulses can excite quasi-spherical high-wavevector coherent acoustic phonon wavepackets using an all x-ray pump and probe scattering experiment. The time- and momentum-resolved diffuse scattering signal is consistent with strain pulses induced by the rapid electron cascade dynamics following photoionization at uncorrelated excitation centers. We quantify key parameters of this process, including the localization size of the strain wavepacket and the energy absorption efficiency, which are determined by the photoelectron and Auger electron cascade dynamics, as well as the electron-phonon interaction. In particular, we obtain the localization size of the observed strain wave packet to be 1.5 and 2.5 nm for bulk SrTiO$_3$ and KTaO$_3$ single crystals, even though there are no nanoscale structures or light-intensity patterns that would ordinarily be required to generate acoustic waves of wavelengths much shorter than the penetration depth. Whereas in GaAs and GaP we do not observe a signal above background. The results provide crucial information on x-ray matter interactions, which sheds light on the mechanism of x-ray energy deposition, and the study of high wavevector acoustic phonons and thermal transport at the nanoscale. △ Less

Submitted 2 January, 2024; v1 submitted 27 December, 2023; originally announced December 2023.

Commissioning and first measurements of the initial X-ray and γ-ray detectors at FACET-II

Authors: P. San Miguel Claveria, D. Storey, G. J. Cao, A. Di Piazza, H. Ekerfelt, S. Gessner, E. Gerstmayr, T. Grismayer, M. Hogan, C. Joshi, C. H. Keitel, A. Knetsch, M. Litos, A. Matheron, K. Marsh, S. Meuren, B. O'Shea, D. A. Reis, M. Tamburini, M. Vranic, J. Wang, V. Zakharova, C. Zhang, S. Corde

Abstract: The upgraded Facility for Advanced Accelerator Experimental Tests (FACET-II) at SLAC National Accelerator Laboratory has been designed to deliver ultra-relativistic electron and positron beams with unprecedented parameters, especially in terms of high peak current and low emittance. For most of the foreseen experimental campaigns hosted at this facility, the high energy radiation produced by these… ▽ More The upgraded Facility for Advanced Accelerator Experimental Tests (FACET-II) at SLAC National Accelerator Laboratory has been designed to deliver ultra-relativistic electron and positron beams with unprecedented parameters, especially in terms of high peak current and low emittance. For most of the foreseen experimental campaigns hosted at this facility, the high energy radiation produced by these beams at the Interaction Point will be a valuable diagnostic to assess the different physical processes under study. This article describes the X-ray and γ-ray detectors installed for the initial phase of FACET-II. Furthermore, experimental measurements obtained with these detectors during the first commissioning and user runs are presented and discussed, illustrating the working principles and potential applications of these detectors. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Comments: Proceedings of the Advanced Accelerator Concepts (AAC) Workshop 2022

Ultrafast measurements of mode-specific deformation potentials of Bi$_2$Te$_3$ and Bi$_2$Se$_3$

Authors: Yi**g Huang, José D. Querales-Flores, Samuel W. Teitelbaum, Jiang Cao, Thomas Henighan, Hanzhe Liu, Mason Jiang, Gilberto De la Peña, Viktor Krapivin, Johann Haber, Takahiro Sato, Matthieu Chollet, Diling Zhu, Tetsuo Katayama, Robert Power, Meabh Allen, Costel R. Rotundu, Trevor P. Bailey, Ctirad Uher, Mariano Trigo, Patrick S. Kirchmann, Éamonn D. Murray, Zhi-Xun Shen, Ivana Savic, Stephen Fahy , et al. (2 additional authors not shown)

Abstract: Quantifying electron-phonon interactions for the surface states of topological materials can provide key insights into surface-state transport, topological superconductivity, and potentially how to manipulate the surface state using a structural degree of freedom. We perform time-resolved x-ray diffraction (XRD) and angle-resolved photoemission (ARPES) measurements on Bi$_2$Te$_3$ and Bi$_2$Se… ▽ More Quantifying electron-phonon interactions for the surface states of topological materials can provide key insights into surface-state transport, topological superconductivity, and potentially how to manipulate the surface state using a structural degree of freedom. We perform time-resolved x-ray diffraction (XRD) and angle-resolved photoemission (ARPES) measurements on Bi$_2$Te$_3$ and Bi$_2$Se$_3$, following the excitation of coherent A$_{1g}$ optical phonons. We extract and compare the deformation potentials coupling the surface electronic states to local A$_{1g}$-like displacements in these two materials using the experimentally determined atomic displacements from XRD and electron band shifts from ARPES.We find the coupling in Bi$_2$Te$_3$ and Bi$_2$Se$_3$ to be similar and in general in agreement with expectations from density functional theory. We establish a methodology that quantifies the mode-specific electron-phonon coupling experimentally, allowing detailed comparison to theory. Our results shed light on fundamental processes in topological insulators involving electron-phonon coupling. △ Less

Submitted 22 July, 2023; originally announced July 2023.

Subdiffusive Dynamics of Topological Vortex Strings of a Charge Density Wave

Authors: Gal Orenstein, Ryan A. Duncan, Gilberto A. de la Pena Munoz, Yi**g Huang, Viktor Krapivin, Quynh Le Nguyen, Samuel Teitelbaum, Anisha G. Singh, Roman Mankowsky, Henrik Lemke, Mathias Sander, Yunpei Deng, Christopher Arrell, Ian R. Fisher, David A. Reis, Mariano Trigo

Abstract: Nonequilibrium states of quantum materials can exhibit exotic properties and enable novel functionality and applications. These transient states are thought to be highly inhomogeneous, involving metastable, self-organized, topologically protected structures, which are inaccessible by most time-resolved measurements. Using ultrafast total x-ray scattering at a free electron laser and a sophisticate… ▽ More Nonequilibrium states of quantum materials can exhibit exotic properties and enable novel functionality and applications. These transient states are thought to be highly inhomogeneous, involving metastable, self-organized, topologically protected structures, which are inaccessible by most time-resolved measurements. Using ultrafast total x-ray scattering at a free electron laser and a sophisticated scaling analysis, we gain unique access to the dynamics on the relevant mesoscopic length scales. Our results show that ultrafast excitation of LaTe$_3$ leads to formation of vortex strings of the charge density wave, which exhibit anomalous, subdiffusive dynamics. These findings provide rare insight into the nonequilibrium mesoscopic response in a quantum material and establish a general framework to investigate properties of topological defects, which can arrest equilibration and enhance competing orders. △ Less

Submitted 31 March, 2023; originally announced April 2023.

Determination of nonthermal bonding origin of a novel photoexcited lattice instability in SnSe

Authors: Yi**g Huang, Samuel Teitelbaum, Shan Yang, Gilberto De la Pe na, Takahiro Sato Matthieu Chollet, Diling Zhu, Jennifer L. Niedziela, Dipanshu Bansal, Andrew F. May, Aaron M. Lindenberg, Olivier Delaire, Mariano Trigo, David A. Reis

Abstract: Interatomic forces that bind materials are largely determined by an often complex interplay between the electronic band-structure and the atomic arrangements to form its equilibrium structure and dynamics. As these forces also determine the phonon dispersion, lattice dynamics measurements are often crucial tools for understanding how materials transform between different structures. This is the ca… ▽ More Interatomic forces that bind materials are largely determined by an often complex interplay between the electronic band-structure and the atomic arrangements to form its equilibrium structure and dynamics. As these forces also determine the phonon dispersion, lattice dynamics measurements are often crucial tools for understanding how materials transform between different structures. This is the case for the mono-chalcogenides which feature a number of lattice instabilities associated with their network of resonant bonds and a large tunability in their functional properties. SnSe hosts a novel lattice instability upon above-bandgap photoexcitation that is distinct from the distortions associated with its high temperature phase transition, demonstrating that photoexcitation can alter the interatomic forces significantly different than thermal excitation. Here we report decisive time-resolved X-ray scattering-based measurements of the nonequlibrium lattice dynamics in SnSe. By fitting interatomic force models to the excited-state dispersion, we determine this instability as being primarily due to changes in the fourth-nearest neighbor bonds that connect bilayers, with relatively little change to the intralayer resonant bonds. In addition to providing critical insight into the nonthermal bonding origin of the instability in SnSe, such measurements will be crucial for understanding and controlling materials properties under non-equilibrium conditions. △ Less

Submitted 21 January, 2023; originally announced January 2023.

Influence of local symmetry on lattice dynamics coupled to topological surface states

Authors: Jonathan A. Sobota, Samuel W. Teitelbaum, Yi**g Huang, José D. Querales-Flores, Robert Power, Meabh Allen, Costel R. Rotundu, Trevor P. Bailey, Ctirad Uher, Tom Henighan, Mason Jiang, Diling Zhu, Matthieu Chollet, Takahiro Sato, Mariano Trigo, Éamonn D. Murray, Ivana Savić, Patrick S. Kirchmann, Stephen Fahy, David. A. Reis, Zhi-Xun Shen

Abstract: We investigate coupled electron-lattice dynamics in the topological insulator Bi2Te3 with time-resolved photoemission and time-resolved x-ray diffraction. It is well established that coherent phonons can be launched by optical excitation, but selection rules generally restrict these modes to zone-center wavevectors and Raman-active branches. We find that the topological surface state couples to ad… ▽ More We investigate coupled electron-lattice dynamics in the topological insulator Bi2Te3 with time-resolved photoemission and time-resolved x-ray diffraction. It is well established that coherent phonons can be launched by optical excitation, but selection rules generally restrict these modes to zone-center wavevectors and Raman-active branches. We find that the topological surface state couples to additional modes, including a continuum of surface-projected bulk modes from both Raman- and infrared-branches, with possible contributions from surface-localized modes when they exist. Our calculations show that this surface vibrational spectrum occurs naturally as a consequence of the translational and inversion symmetries broken at the surface, without requiring the splitting-off of surface-localized phonon modes. The generality of this result suggests that coherent phonon spectra are useful by providing unique fingerprints for identifying surface states in more controversial materials. These effects may also expand the phase space for tailoring surface state wavefunctions via ultrafast optical excitation. △ Less

Submitted 19 December, 2022; originally announced December 2022.

High-harmonic generation from artificially stacked 2D crystals

Authors: Christian Heide, Yuki Kobayashi, Amalya C. Johnson, Tony F. Heinz, David A. Reis, Fang Liu, Shambhu Ghimire

Abstract: We report a coherent layer-by-layer high-order harmonic generation (HHG) build-up in artificially stacked transition metal dichalcogenides (TMDC) crystals in their various stacking configurations. In the experiments, millimeter-sized single crystalline monolayers are synthesized using the gold foil-exfoliation method, followed by artificially stacking on a transparent substrate. High-order harmoni… ▽ More We report a coherent layer-by-layer high-order harmonic generation (HHG) build-up in artificially stacked transition metal dichalcogenides (TMDC) crystals in their various stacking configurations. In the experiments, millimeter-sized single crystalline monolayers are synthesized using the gold foil-exfoliation method, followed by artificially stacking on a transparent substrate. High-order harmonics up to the 19th order are generated by the interaction with an ultrafast mid-infrared (MIR) driving laser. We find that the generation is sensitive to the number of layers and their relative orientation. For AAAA stacking configuration, both odd- and even-orders exhibit a quadratic increase in intensity as a function of the number of layers, which is a signature of constructive interference of high-harmonic emission from successive layers. Particularly, we observe some deviations from this scaling at photon energies above the bandgap, which is explained by self-absorption effects. For AB and ABAB stacking, even-order harmonics remain below the detection level, consistent with the presence of inversion symmetry. Our study confirms the capability of producing non-perturbative high-order harmonics from stacked layered materials subjected to intense MIR fields without damaging samples. It has implications for optimizing solid-state HHG sources at the nano-scale and develo** high-harmonics as an ultrafast probe of artificially stacked layered materials. Because the HHG process is a strong-field driven process, it has the potential to probe high-momentum and energy states in the bandstructure combined with atomic-scale sensitivity in real space, making it an attractive probe of novel material structures such as the Moiré pattern. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Floquet engineering of strongly-driven excitons in monolayer tungsten disulfide

Authors: Yuki Kobayashi, Christian Heide, Amalya C. Johnson, Fang Liu, David A. Reis, Tony F. Heinz, Shambhu Ghimire

Abstract: Interactions of quantum materials with strong-laser fields can induce exotic nonequilibrium electronic states. Monolayer transition-metal dichalcogenides, a new class of direct-gap semiconductors with prominent quantum confinement, offer exceptional opportunities toward Floquet engineering of quasiparticle electron-hole states, or excitons. Strong-field driving has a potential to achieve enhanced… ▽ More Interactions of quantum materials with strong-laser fields can induce exotic nonequilibrium electronic states. Monolayer transition-metal dichalcogenides, a new class of direct-gap semiconductors with prominent quantum confinement, offer exceptional opportunities toward Floquet engineering of quasiparticle electron-hole states, or excitons. Strong-field driving has a potential to achieve enhanced control of electronic band structure, thus a possibility to open a new realm of exciton light-matter interactions. However, experimental implementation of strongly-driven excitons has so far remained out of reach. Here, we use mid-infrared laser pulses below the optical bandgap to excite monolayer tungsten disulfide up to a field strength of 0.3 V/nm, and demonstrate strong-field light dressing of excitons in the excess of a hundred millielectronvolt. Our high-sensitivity transient absorption spectroscopy further reveals formation of a virtual absorption feature below the 1s-exciton resonance, which is assigned to a light-dressed sideband from the dark 2p-exciton state. Quantum-mechanical simulations substantiate the experimental results and enable us to retrieve real-space movies of the exciton dynamics. This study advances our understanding of the exciton dynamics in the strong-field regime, and showcases the possibility of harnessing ultrafast, strong-field phenomena in device applications of two-dimensional materials. △ Less

Submitted 31 October, 2022; originally announced November 2022.

Ultrafast x-ray scattering reveals composite amplitude collective mode in the Weyl charge density wave material (TaSe$_4$)$_2$I

Authors: Quynh L. Nguyen, Ryan A. Duncan, Gal Orenstein, Yi**g Huang, Viktor Krapivin, Gilberto de la Pena, Chance Ornelas-Skarin, David A. Reis, Peter Abbamonte, Simon Bettler, Matthieu Chollet, Matthias C. Hoffmann, Matthew Hurley, Soyeun Kim, Patrick S. Kirchmann, Yuya Kubota, Fahad Mahmood, Alexander Miller, Taito Osaka, Kejian Qu, Takahiro Sato, Daniel P. Shoemaker, Nicholas Sirica, Sanghoon Song, Jade Stanton , et al. (5 additional authors not shown)

Abstract: We report ultrafast x-ray scattering experiments of the quasi-1D charge density wave (CDW) material (TaSe$_4$)$_2$I following photoexcitation with femtosecond infrared laser pulses. From the time-dependent diffraction signal at the CDW sidebands we identify an amplitude mode derived primarily from the transverse acoustic component of the CDW static distortion. The dynamics of this acoustic amplitu… ▽ More We report ultrafast x-ray scattering experiments of the quasi-1D charge density wave (CDW) material (TaSe$_4$)$_2$I following photoexcitation with femtosecond infrared laser pulses. From the time-dependent diffraction signal at the CDW sidebands we identify an amplitude mode derived primarily from the transverse acoustic component of the CDW static distortion. The dynamics of this acoustic amplitude mode are described well by a model of a displacive excitation, which we interpret as mediated through a coupling to the optical phonon component associated with the tetramerization of the Ta chains. △ Less

Submitted 23 December, 2022; v1 submitted 31 October, 2022; originally announced October 2022.

Interface collisions with diffusive mass transport

Authors: Bastien Marguet, F. D. A. Aarão Reis, Olivier Pierre-Louis

Abstract: We report on a linear Langevin model that describes the evolution of the roughness of two interfaces that move towards each other and are coupled by a diffusion field. This model aims at describing the closing of the gap between two two-dimensional material domains during growth, and the subsequent formation of a rough grain boundary. We assume that deposition occurs in the gap between the two dom… ▽ More We report on a linear Langevin model that describes the evolution of the roughness of two interfaces that move towards each other and are coupled by a diffusion field. This model aims at describing the closing of the gap between two two-dimensional material domains during growth, and the subsequent formation of a rough grain boundary. We assume that deposition occurs in the gap between the two domains and that the growth units diffuse and may attach to the edges of the domains. These units can also detach from edges, diffuse, and re-attach elsewhere. For slow growth, the edge roughness increases monotonously and then saturates at some equilibrium value. For fast growth, the roughness exhibits a maximum just before the collision between the two interfaces, which is followed by a minimum. The peak of the roughness can be dominated by statistical fluctuations or by edge instabilities. A phase diagram with three regimes is obtained: slow growth without peak, peak dominated by statistical fluctuations, and peak dominated by instabilities. These results reproduce the main features observed in Kinetic Monte Carlo simulations. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Comments: 18 pages, 16 Figures

Growth at high substrate coverage can decrease the grain boundary roughness of 2D materials

Authors: Fabio D. A. Aarão Reis, Bastien Marguet, Olivier Pierre-Louis

Abstract: Grain boundary roughness can affect electronic and mechanical properties of two-dimensional materials. This roughness depends crucially on the growth process by which the two-dimensional material is formed. To investigate the key mechanisms that govern the roughness, we have performed kinetic Monte Carlo simulations of a simple model that includes particle attachment, detachment, and diffusion. We… ▽ More Grain boundary roughness can affect electronic and mechanical properties of two-dimensional materials. This roughness depends crucially on the growth process by which the two-dimensional material is formed. To investigate the key mechanisms that govern the roughness, we have performed kinetic Monte Carlo simulations of a simple model that includes particle attachment, detachment, and diffusion. We have studied the closure of the gap between two flakes during growth, and the subsequent formation of the grain boundary (GB) for a broad range of model parameters. The well known near-equilibrium (attachment-limited) and unstable (diffusion-limited) growth regimes are identified, but we also observe a third regime when the precursor flux is sufficiently high to fully cover the gap between the edges. This high coverage regime forms GBs with spatially uncorrelated roughness, which quickly relax to smoother configurations. Extrapolating the numerical results (with support from a theoretical approach) to edge lengths and gap widths of some micrometers, we confirm the advantage of this regime to produce GBs with minimal roughness faster than near-equilibrium conditions. This suggests an unexpected route towards efficient growth of two-dimensional materials with smooth GBs. △ Less

Submitted 4 April, 2022; originally announced April 2022.

On the use of multilayer Laue lenses with X-ray Free Electron Lasers

Authors: Mauro Prasciolu, Kevin T. Murray, Nikolay Ivanov, Holger Fleckenstein, Martin Domaracký, Luca Gelisio, Fabian Trost, Kartik Ayyer, Dietrich Krebs, Steve Aplin, Salah Awel, Ulrike Boesenberg, Anton Barty, Armando D. Estillore, Matthias Fuchs, Yaroslav Gevorkov, Joerg Hallmann, Chan Kim, Juraj Knoška, Jochen Küpper, Chufeng Li, Wei Lu, Valerio Mariani, Andrew J. Morgan, Johannes Möller , et al. (12 additional authors not shown)

Abstract: Multilayer Laue lenses were used for the first time to focus x-rays from an X-ray Free Electron Laser (XFEL). In an experiment, which was performed at the European XFEL, we demonstrated focusing to a spot size of a few tens of nanometers. A series of runs in which the number of pulses per train was increased from 1 to 2, 3, 4, 5, 6, 7, 10, 20 and 30 pulses per train, all with a pulse separation of… ▽ More Multilayer Laue lenses were used for the first time to focus x-rays from an X-ray Free Electron Laser (XFEL). In an experiment, which was performed at the European XFEL, we demonstrated focusing to a spot size of a few tens of nanometers. A series of runs in which the number of pulses per train was increased from 1 to 2, 3, 4, 5, 6, 7, 10, 20 and 30 pulses per train, all with a pulse separation of 3.55 us, was done using the same set of lenses. The increase in the number of pulses per train was accompanied with an increase of x-ray intensity (transmission) from 9% to 92% at 5 pulses per train, and then the transmission was reduced to 23.5 % when the pulses were increased further. The final working condition was 30 pulses per train and 23.5% transmission. Only at this condition we saw that the diffraction efficiency of the MLLs changed over the course of a pulse train, and this variation was reproducible from train to train. We present the procedure to align and characterize these lenses and discuss challenges working with the pulse trains from this unique x-ray source. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Ultrafast Suppression of the Ferroelectric Instability in KTaO$_3$

Authors: Viktor Krapivin, Mingqiang Gu, D. Hickox-Young, S. W. Teitelbaum, Y. Huang, G. de la Peña, D. Zhu, N. Sirica, M. -C. Lee, R. P. Prasankumar, A. Maznev, K. A. Nelson, M. Chollet, James M. Rondinelli, D. A. Reis, M. Trigo

Abstract: We use an x-ray free-electron laser to study the ultrafast lattice dynamics following above band-gap photoexcitation of the incipient ferroelectric potassium-tantalate, \kto. % We use ultrafast near-UV (central wavelength 266\,nm and 50 fs pulse duration) laser light to photoexcite charge carriers across the gap and probe the ultrafast lattice dynamics by recording the x-ray diffuse intensity th… ▽ More We use an x-ray free-electron laser to study the ultrafast lattice dynamics following above band-gap photoexcitation of the incipient ferroelectric potassium-tantalate, \kto. % We use ultrafast near-UV (central wavelength 266\,nm and 50 fs pulse duration) laser light to photoexcite charge carriers across the gap and probe the ultrafast lattice dynamics by recording the x-ray diffuse intensity throughout multiple Brillouin zones using pulses from the Linac Coherent Light Source (LCLS) (central wavelength 1.3\,Å\, and $< 10$~fs pulse duration). We observe changes in the diffuse intensity that we conclude are associated with a hardening of the soft transverse optical and transverse acoustic phonon branches along $Γ$ to $X$ and $Γ$ to $M$. Using ground- and excited-state interatomic force constants from density functional theory (DFT) and assuming the phonon populations can be described by a time-dependent temperature, we fit the quasi-equilibrium thermal diffuse intensity to the experimental time-dependent intensity. We obtain the instantaneous lattice temperature and density of photoexcited charge carriers as a function of time delay. The DFT calculations demonstrate that photoexcitation transfers charge from oxygen $2p$ derived $π$-bonding orbitals to Ta $5d$ derived antibonding orbitals, further suppressing the ferroelectric instability and increasing the stability of the cubic, paraelectric structure. △ Less

Submitted 26 January, 2022; originally announced January 2022.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. Lett. 129, 127601 (2022)

All-optical probe of three-dimensional topological insulators based on high-harmonic generation by circularly-polarized laser fields

Authors: Denitsa Baykusheva, Alexis Chacón, Jian Lu, Trevor P. Bailey, Jonathan A. Sobota, Hadas Soifer, Patrick S. Kirchmann, Costel R. Rotundu, Ctirad Uher, Tony F. Heinz, David A. Reis, Shambhu Ghimire

Abstract: We report the observation of a novel nonlinear optical response from the prototypical three-dimensional topological insulator Bi$_2$Se$_3$ through the process of high-order harmonic generation. We find that the generation efficiency increases as the laser polarization is changed from linear to elliptical, and it becomes maximum for circular polarization. With the aid of a microscopic theory and a… ▽ More We report the observation of a novel nonlinear optical response from the prototypical three-dimensional topological insulator Bi$_2$Se$_3$ through the process of high-order harmonic generation. We find that the generation efficiency increases as the laser polarization is changed from linear to elliptical, and it becomes maximum for circular polarization. With the aid of a microscopic theory and a detailed analysis of the measured spectra, we reveal that such anomalous enhancement encodes the characteristic topology of the band structure that originates from the interplay of strong spin-orbit coupling and time-reversal symmetry protection. Our study reveals a new platform for chiral strong-field physics and presents a novel, contact-free, all-optical approach for the spectroscopy of topological insulators. The implications are in ultrafast probing of topological phase transitions, light-field driven dissipationless electronics, and quantum computation. △ Less

Submitted 30 September, 2021; originally announced September 2021.

Comments: 21 pages, 5 figures

Journal ref: Nano Lett. 2021, 21, 21, 8970-8978

Probing Electron-Hole Coherence in Strongly-Driven Solids

Authors: Christian Heide, Yuki Kobayashi, Amalya Johnson, Fang Liu, Tony F. Heinz, David A. Reis, Shambhu Ghimire

Abstract: High-harmonic generation (HHG) is a coherent optical process in which the incident photon energy is up-converted to the multiples of its initial energy. In solids, under the influence of a strong laser field, electron-hole (e-h) pairs are generated and subsequently driven to high energy and momentum within a fraction of the optical cycle. These dynamics encode the band structure, including non-tri… ▽ More High-harmonic generation (HHG) is a coherent optical process in which the incident photon energy is up-converted to the multiples of its initial energy. In solids, under the influence of a strong laser field, electron-hole (e-h) pairs are generated and subsequently driven to high energy and momentum within a fraction of the optical cycle. These dynamics encode the band structure, including non-trivial topological properties of the source material, through both intraband current and interband polarization, into the high harmonic spectrum. In the course of this process, dephasing between the driven electron and the hole can significantly reduce the HHG efficiency. Here, we exploit this feature and turn it into a measurement of e-h coherence in strongly driven solids. Utilizing a pre-pump pulse, we first photodope monolayer molybdenum disulfide and then examine the HHG induced by an intense infrared pulse. We observe clear suppression of the HH intensity, which becomes more pronounced with increasing order. Based on quantum simulations, we attribute this monotonic order dependence as a signature of ultrafast electron-hole dephasing, which leads to an exponential decay of the inter-band polarization, proportional to the sub-cycle excursion time of the e-h pair. Our results demonstrate the importance of many-body effects, such as density-dependent decoherence in HHG and provide a novel platform to probe electron-hole coherence in strongly driven systems. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Photo-induced plasmon-phonon coupling in PbTe

Authors: M. P. Jiang, M. Trigo, S. Fahy, A. Hauber, É. D. Murray, I Savić, C. Bray, J. N. Clark, T. Henighan, M. Kozina, M. Chollet, J. M. Glownia, M. C. Hoffmann, D. Zhu, O. Delaire, A. F. May, B. C. Sales, A. M. Lindenberg, P. Zalden, T. Sato, R. Merlin, D. A. Reis

Abstract: We report the observation of photo-induced plasmon-phonon coupled modes in the group IV-VI semiconductor PbTe using Fourier-transform inelastic X-ray scattering at the Linac Coherent Light Source (LCLS). We measure the near-zone-center dispersion of the heavily screened longitudinal optical (LO) phonon branch as extracted from differential changes in x-ray diffuse scattering intensity following ab… ▽ More We report the observation of photo-induced plasmon-phonon coupled modes in the group IV-VI semiconductor PbTe using Fourier-transform inelastic X-ray scattering at the Linac Coherent Light Source (LCLS). We measure the near-zone-center dispersion of the heavily screened longitudinal optical (LO) phonon branch as extracted from differential changes in x-ray diffuse scattering intensity following above band gap photoexcitation. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Comments: 5 pages, 2 figures

Ultrafast x-ray probes of dynamics in solids

Authors: Mariano Trigo, Mark P. M. Dean, David A. Reis

Abstract: Advances in our ability to understand and utilize the world around us have always relied on the development of advanced tools for probing and manipulating materials properties. X-ray matter interactions played a critical role in the development of the modern theory of solid-state materials that has continued over more than a century. The development of ever-brighter x-ray sources has facilitated e… ▽ More Advances in our ability to understand and utilize the world around us have always relied on the development of advanced tools for probing and manipulating materials properties. X-ray matter interactions played a critical role in the development of the modern theory of solid-state materials that has continued over more than a century. The development of ever-brighter x-ray sources has facilitated ever more sensitive x-ray scattering and spectroscopy measurements that are able to probe not just the lattice structure, but also the spectrum of elementary excitations in complex materials. The interactions underlying the electronic, magnetic and thermal properties of solids tend to be associated with lengthscales comparable to the atomic separation and timescales ranging from femtosecond to picoseconds. The short wavelength, femtosecond pulses from \gls*{XFEL}s therefore offer unprecedented opportunities to probe and understand material properties on their natural lengthscales and timescales of these processes. This chapter reviews a number of exemplary \gls*{XFEL}-based experiments on lattice and electronic dynamics, and their microscopic interactions both near and out of equilibrium. We conclude with a brief discussion of new forms of spectroscopy enabled by the combination of high flux and short pulse duration and give an outlook for how the field will develop in the future. △ Less

Submitted 11 August, 2021; originally announced August 2021.

Comments: 27 pages, 13 figures

Effects of the growth kinetics on solute diffusion in porous films

Authors: Gabriela B. Correa, Renan A. L. Almeida, Fabio D. A. Aarao Reis

Abstract: For the development of porous materials with improved transport properties, a key missing ingredient is to determine the relations between growth kinetics, structure, and transport parameters. Here, we address these relations by studying solute diffusion through three-dimensional porous films produced by simple deposition models with controlled thickness and porosity. We simulate growing films wit… ▽ More For the development of porous materials with improved transport properties, a key missing ingredient is to determine the relations between growth kinetics, structure, and transport parameters. Here, we address these relations by studying solute diffusion through three-dimensional porous films produced by simple deposition models with controlled thickness and porosity. We simulate growing films with competitive aggregation rules that incorporate lateral aggregation (relative rate proportional to $p$), which leads to pore formation, and surface relaxation ($1-p$) that favors compaction. By connecting a solute source at the basis and a drain at the top outer surface of the films, we extract the effective diffusion coefficients from steady-state simulations. We find that for a given film thickness, the larger the $p$, the larger the effective porosity and diffusivity, but the smaller the tortuosity. Kee** constant growth conditions (i.e., same $p$), the increase of thickness always leads to an increase of effective porosity, but a nontrivial behavior in the diffusivity occurs: for $p\leq 0.7$, the diffusion coefficient is larger in thicker films; this is accompanied by a decrease of the tortuosity with the thickness, thus indicating that growth continuously improves pore structure for diffusion. Microscopically, such a result is associated with narrower distributions of local solute currents at higher points of films. Particularly for $p\geq 0.9$, in which film porosity is $\sim 0.65-0.7$, the tortuosity is between $1.3$ and $2$, increases with the thickness, and has maximal changes near $25\%$. Pairs of values of porosity and tortuosity that we obtain here, for the thickest films, agree with those experimentally measured in some porous electrodes. Noteworthy, the increase of film thickness is generally favorable for diffusion in their pores, and exceptions have small losses in tortuosity. △ Less

Submitted 13 March, 2024; v1 submitted 23 July, 2021; originally announced July 2021.

Comments: Main: 37 pages, 11 figures, 2 tables. Suppl. Mat.: 7 pages, 4 figures. Paper written by F. Reis

Journal ref: G. B. Correa, R. Almeida, F. D. A. A. Reis, J. Phys. Chem. C 124 (2020) 19101-19111

Single Particle Detection System for Strong-Field QED Experiments

Authors: F. C. Salgado, N. Cavanagh, M. Tamburini, D. W. Storey, R. Beyer, P. H. Bucksbaum, Z. Chen, A. Di Piazza, E. Gerstmayr, Harsh, E. Isele, A. R. Junghans, C. H. Keitel, S. Kuschel, C. F. Nielsen, D. A. Reis, C. Roedel, G. Sarri, A. Seidel, C. Schneider, U. I. Uggerhøj, J. Wulff, V. Yakimenko, C. Zepter, S. Meuren , et al. (1 additional authors not shown)

Abstract: Measuring signatures of strong-field quantum electrodynamics (SF-QED) processes in an intense laser field is an experimental challenge: it requires detectors to be highly sensitive to single electrons and positrons in the presence of the typically very strong x-ray and $γ$-photon background levels. In this paper, we describe a particle detector capable of diagnosing single leptons from SF-QED inte… ▽ More Measuring signatures of strong-field quantum electrodynamics (SF-QED) processes in an intense laser field is an experimental challenge: it requires detectors to be highly sensitive to single electrons and positrons in the presence of the typically very strong x-ray and $γ$-photon background levels. In this paper, we describe a particle detector capable of diagnosing single leptons from SF-QED interactions and discuss the background level simulations for the upcoming Experiment-320 at FACET-II (SLAC National Accelerator Laboratory). The single particle detection system described here combines pixelated scintillation LYSO screens and a Cherenkov calorimeter. We detail the performance of the system using simulations and a calibration of the Cherenkov detector at the ELBE accelerator. Single 3 GeV leptons are expected to produce approximately 537 detectable photons in a single calorimeter channel. This signal is compared to Monte-Carlo simulations of the experiment. A signal-to-noise ratio of 18 in a single Cherenkov calorimeter detector is expected and a spectral resolution of 2% is achieved using the pixelated LYSO screens. △ Less

Submitted 9 December, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Journal ref: New J. Phys. 24, 015002 (2021)

Observation of a Novel Lattice Instability in Ultrafast Photoexcited SnSe

Authors: Yi**g Huang, Shan Yang, Samuel Teitelbaum, Gilberto De la Pena, Takahiro Sato, Matthieu Chollet, Diling Zhu, Jennifer L. Niedziela, Dipanshu Bansal, Andrew P. May, Aaron M. Lindenberg, Oliver Delaire, David A. Reis, Mariano Trigo

Abstract: There is growing interest in using ultrafast light pulses to drive functional materials into nonequilibrium states with novel properties. The conventional wisdom is that above gap photoexcitation behaves similarly to raising the electronic temperature and lacks the desired selectivity in the final state. Here we report a novel nonthermal lattice instability induced by ultrafast above-gap excitatio… ▽ More There is growing interest in using ultrafast light pulses to drive functional materials into nonequilibrium states with novel properties. The conventional wisdom is that above gap photoexcitation behaves similarly to raising the electronic temperature and lacks the desired selectivity in the final state. Here we report a novel nonthermal lattice instability induced by ultrafast above-gap excitation in SnSe, a representative of the IV-VI class of semiconductors that provides a rich platform for tuning material functionality with ultrafast pulses due to their multiple lattice instabilities. The new lattice instability is accompanied by a drastic softening of the lowest frequency A$_g$ phonon. This mode has previously been identified as the soft mode in the thermally driven phase transition to a Cmcm structure. However, by a quantitative reconstruction of the atomic displacements from time-resolved x-ray diffraction for multiple Bragg peaks and excitation densities, we show that ultrafast photoexcitation with near-infrared (1.55 eV) light, induces a distortion towards a different structure with Immm symmetry. The Immm structure of SnSe is an orthorhombic distortion of the rocksalt structure and does not occur in equilibrium. Density functional theory (DFT) calculations reveal that the photoinduced Immm lattice instability arises from electron excitation from the Se 4$p$- and Sn 5$s$-derived bands deep below the Fermi level that cannot be excited thermally. The results have implications for optical control of the thermoelectric, ferroelectric and topological properties of the monochalcogenides and related materials. More generally, the results emphasize the need for ultrafast structural probes to reveal distinct atomic-scale dynamics that are otherwise too subtle or invisible in conventional spectroscopies. △ Less

Submitted 6 December, 2021; v1 submitted 14 June, 2021; originally announced June 2021.

MP3 White Paper 2021 -- Research Opportunities Enabled by Co-locating Multi-Petawatt Lasers with Dense Ultra-Relativistic Electron Beams

Authors: Sebastian Meuren, David A. Reis, Roger Blandford, Phil H. Bucksbaum, Nathaniel J. Fisch, Frederico Fiuza, Elias Gerstmayr, Siegfried Glenzer, Mark J. Hogan, Claudio Pellegrini, Michael E. Peskin, Kenan Qu, Glen White, Vitaly Yakimenko

Abstract: Novel emergent phenomena are expected to occur under conditions exceeding the QED critical electric field, where the vacuum becomes unstable to electron-positron pair production. The required intensity to reach this regime, $\sim10^{29}\,\mathrm{Wcm^{-2}}$, cannot be achieved even with the most intense lasers now being planned/constructed without a sizeable Lorentz boost provided by interactions w… ▽ More Novel emergent phenomena are expected to occur under conditions exceeding the QED critical electric field, where the vacuum becomes unstable to electron-positron pair production. The required intensity to reach this regime, $\sim10^{29}\,\mathrm{Wcm^{-2}}$, cannot be achieved even with the most intense lasers now being planned/constructed without a sizeable Lorentz boost provided by interactions with ultrarelativistic particles. Seeded laser-laser collisions may access this strong-field QED regime at laser intensities as low as $\sim10^{24}\,\mathrm{Wcm^{-2}}$. Counterpropagating e-beam--laser interactions exceed the QED critical field at still lower intensities ($\sim10^{20}\,\mathrm{Wcm^{-2}}$ at $\sim10\,\mathrm{GeV}$). Novel emergent phenomena are predicted to occur in the "QED plasma regime", where strong-field quantum and collective plasma effects play off one another. Here the electron beam density becomes a decisive factor. Thus, the challenge is not just to exceed the QED critical field, but to do so with high quality, approaching solid-density electron beams. Even though laser wakefield accelerators (LWFA) represent a very promising research field, conventional accelerators still provide orders of magnitude higher charge densities at energies $\gtrsim10\,\mathrm{GeV}$. Co-location of extremely dense and highly energetic electron beams with a multi-petawatt laser system would therefore enable seminal research opportunities in high-field physics and laboratory astrophysics. This white paper elucidates the potential scientific impact of multi-beam capabilities that combine a multi-PW optical laser, high-energy/density electron beam, and high-intensity x rays and outlines how to achieve such capabilities by co-locating a 3-10 PW laser with a state-of-the-art linear accelerator. △ Less

Submitted 24 May, 2021; originally announced May 2021.

Comments: 3 pages

Roughness and Correlations in the Transition from Island to Film Growth: Simulations and Application to CdTe Deposition

Authors: Tung B. T. To, Renan A. L. Almeida, Sukarno O. Ferreira, Fábio D. A. Aarão Reis

Abstract: Using kinetic Monte Carlo simulations, we develop a framework to relate morphological properties and microscopic dynamics during island growth, coalescence, and initial formation of continuous heteroepitaxial films. The average island width is controlled by adatom mobility on the substrate. Subsequent evolution strongly depends on the Ehrlich-Schwöebel energy barrier $E_{ES}$ of the deposited mate… ▽ More Using kinetic Monte Carlo simulations, we develop a framework to relate morphological properties and microscopic dynamics during island growth, coalescence, and initial formation of continuous heteroepitaxial films. The average island width is controlled by adatom mobility on the substrate. Subsequent evolution strongly depends on the Ehrlich-Schwöebel energy barrier $E_{ES}$ of the deposited material. As $E_{ES}$ decreases, islands becomes taller and their coalescence is delayed. For small islands and large $E_{ES}$, the global roughness increases as $W\sim{\text{thickness}}^{1/2}$ and the local roughness increases at short scales (apparent anomalous scaling) before and after island coalescence. If the islands are wide, $W$ may have a plateau for large $E_{ES}$ and has a maximum for small $E_{ES}$ when the islands coalesce. This framework is applied to atomic-force microscopy data of the initial stages of CdTe deposition on Kapton: a maximum of $W$ during island coalescence indicates negligible ES barrier, consistently with scaling properties of much thicker films, and the diffusion coefficient ${10}^{-7}{\text{--}}{10}^{-5}{\text{cm}}^2/{\text s}$ on the Kapton surface at $150\,^{\circ}\mathrm{C}$ is estimated. Applications of the framework to other materials are suggested, in which the expected roles of ES barriers are highlighted. △ Less

Submitted 21 July, 2021; v1 submitted 21 May, 2021; originally announced May 2021.

Journal ref: Applied Surface Science 560 (2021) 149946

Time increasing rates of infiltration and reaction in porous media at the percolation thresholds

Authors: Ismael S. S. Carrasco, Fábio D. A. Aarão Reis

Abstract: The infiltration of a solute in a fractal porous medium is usually anomalous, but chemical reactions of the solute and that material may increase the porosity and affect the evolution of the infiltration. We study this problem in two- and three-dimensional lattices with randomly distributed porous sites at the critical percolation thresholds and with a border in contact with a reservoir of an aggr… ▽ More The infiltration of a solute in a fractal porous medium is usually anomalous, but chemical reactions of the solute and that material may increase the porosity and affect the evolution of the infiltration. We study this problem in two- and three-dimensional lattices with randomly distributed porous sites at the critical percolation thresholds and with a border in contact with a reservoir of an aggressive solute. The solute infiltrates that medium by diffusion and the reactions with the impermeable sites produce new porous sites with a probability $r$, which is proportional to the ratio of reaction and diffusion rates at the scale of a lattice site. Numerical simulations for $r\ll1$ show initial subdiffusive scaling and long time Fickean scaling of the infiltrated volumes or areas, but with an intermediate regime with time increasing rates of infiltration and reaction. The anomalous exponent of the initial regime agrees with a relation previously applied to infinitely ramified fractals. We develop a scaling approach that explains the subsequent time increase of the infiltration rate, the dependence of this rate on $r$, and the crossover to the Fickean regime. The exponents of the scaling relations depend on the fractal dimensions of the critical percolation clusters and on the dimensions of random walks in those clusters. The time increase of the reaction rate is also justified by that reasoning. As $r$ decreases, there is an increase in the number of time decades of the intermediate regime, which suggests that the time increasing rates are more likely to be observed is slowly reacting systems. △ Less

Submitted 23 February, 2021; originally announced February 2021.

Comments: 14 pages, 13 figures

Journal ref: Phys. Rev. E 103, 022138 - Published 22 February 2021

Direct Observation of Coherent Longitudinal and Shear Acoustic Phonons in TaAs Using Ultrafast X-ray Diffraction

Authors: Min-Cheol Lee, N. Sirica, S. W. Teitelbaum, A. Maznev, T. Pezeril, R. Tutchton, V. Krapivin, G. A. de la Pena, Y. Huang, L. X. Zhao, G. F. Chen, B. Xu, R. Yang, J. Shi, J. Zhu, D. A. Yarotski, X. G. Qiu, K. A. Nelson, M. Trigo, D. A. Reis, R. P. Prasankumar

Abstract: Using femtosecond time-resolved X-ray diffraction, we investigated optically excited coherent acoustic phonons in the Weyl semimetal TaAs. The low symmetry of the (112) surface probed in our experiment enables the simultaneous excitation of longitudinal and shear acoustic modes, whose dispersion closely matches our simulations. We observed an asymmetry in the spectral lineshape of the longitudinal… ▽ More Using femtosecond time-resolved X-ray diffraction, we investigated optically excited coherent acoustic phonons in the Weyl semimetal TaAs. The low symmetry of the (112) surface probed in our experiment enables the simultaneous excitation of longitudinal and shear acoustic modes, whose dispersion closely matches our simulations. We observed an asymmetry in the spectral lineshape of the longitudinal mode that is notably absent from the shear mode, suggesting a time-dependent frequency chirp that is likely driven by photoinduced carrier diffusion. We argue on the basis of symmetry that these acoustic deformations can transiently alter the electronic structure near the Weyl points and support this with model calculations. Our study underscores the benefit of using off-axis crystal orientations when optically exciting acoustic deformations in topological semimetals, allowing one to transiently change their crystal and electronic structures. △ Less

Submitted 28 February, 2022; v1 submitted 13 November, 2020; originally announced November 2020.

Comments: 6 pages, 4 figures for manuscript, and 15 pages and 11 figures for supplemental materials

Report number: LA-UR-20-29013

Journal ref: Phys. Rev. Lett. 128, 155301 (2022)

Ultrafast modification of the electronic structure of a correlated insulator

Authors: O. Grånäs I. Vaskivskyi, X. Wang, P. Thunström, S. Ghimire, R. Knut, J. Söderström, L. Kjellsson, D. Turenne, R. Y. Engel, M. Beye, J. Lu, A. H. Reid, W. Schlotter, G. Coslovich, M. Hoffmann, G. Kolesov, C. Schüßler-Langeheine, A. Styervoyedov, N. Tancogne-Dejean, M. A. Sentef, D. A. Reis, A. Rubio, S. S. P. Parkin, O. Karis, J. Nordgren , et al. (3 additional authors not shown)

Abstract: A non-trivial balance between Coulomb repulsion and kinematic effects determines the electronic structure of correlated electron materials. The use electromagnetic fields strong enough to rival these native microscopic interactions allows us to study the electronic response as well as the timescales and energies involved in using quantum effects for possible applications. We use element-specific t… ▽ More A non-trivial balance between Coulomb repulsion and kinematic effects determines the electronic structure of correlated electron materials. The use electromagnetic fields strong enough to rival these native microscopic interactions allows us to study the electronic response as well as the timescales and energies involved in using quantum effects for possible applications. We use element-specific transient x-ray absorption spectroscopy and high-harmonic generation to measure the response to ultrashort off-resonant optical fields in the prototypical correlated electron insulator NiO. Surprisingly, fields of up to 0.22 V/Å leads to no detectable changes on the correlated Ni 3d-orbitals contrary to previous predictions. A transient directional charge transfer is uncovered, a behavior that is captured by first-principles theory. Our results highlight the importance of retardation effects in electronic screening, and pinpoints a key challenge in functionalizing correlated materials for ultrafast device operation. △ Less

Submitted 26 December, 2021; v1 submitted 25 August, 2020; originally announced August 2020.

Comments: 6 pages, 3 figure, supplemental material not included in document

Strong-field physics in three-dimensional topological insulators

Authors: Denitsa Baykusheva, Alexis Chacón, Dasol Kim, Dong Eon Kim, David A. Reis, Shambhu Ghimire

Abstract: We investigate theoretically the strong-field regime of light-matter interactions in the topological-insulator class of quantum materials. In particular, we focus on the process of non-perturbative high-order harmonic generation from the paradigmatic three-dimensional topological insulator bismuth selenide (Bi$_2$Se$_3$) subjected to intense mid-infrared laser fields. We analyze the contributions… ▽ More We investigate theoretically the strong-field regime of light-matter interactions in the topological-insulator class of quantum materials. In particular, we focus on the process of non-perturbative high-order harmonic generation from the paradigmatic three-dimensional topological insulator bismuth selenide (Bi$_2$Se$_3$) subjected to intense mid-infrared laser fields. We analyze the contributions from the spin-orbit-coupled bulk states and the topological surface bands separately and reveal a major difference in how their harmonic yields depend on the ellipticity of the laser field. Bulk harmonics show a monotonous decrease in their yield as the ellipticity increases, in a manner reminiscent of high harmonic generation in gaseous media. However, the surface contribution exhibits a highly non-trivial dependence, culminating with a maximum for circularly polarized fields. We attribute the observed anomalous behaviour to: (i) the enhanced amplitude and the circular pattern of the interband dipole and the Berry connections in the vicinity of the Dirac point; and (ii) the influence of the higher-order, "hexagonal war**" terms in the Hamiltonian, which are responsible for the hexagonal deformation of the energy surface at higher momenta. The latter are associated directly with spin-orbit-coupling parameters. Our results thus establish the sensitivity of strong-field driven high harmonic emission to the topology of the band structure as well as to the manifestations of spin-orbit interaction. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Comments: 19 pages, 12 figures

Journal ref: Phys. Rev. A 103, 023101 (2021)

Statistics of adatom diffusion in a model of thin film growth

Authors: Edwin E. Mozo Luis, Ismael S. S. Carrasco, Thiago A. de Assis, Fábio D. A. Aarão Reis

Abstract: We study the statistics of the number of executed hops of adatoms at the surface of films grown with the Clarke-Vvedensky (CV) model in simple cubic lattices. The distributions of this number, $N$, are determined in films with average thicknesses close to $50$ and $100$ monolayers for a broad range of values of the diffusion-to-deposition ratio $R$ and of the probability $ε$ that lowers the diffus… ▽ More We study the statistics of the number of executed hops of adatoms at the surface of films grown with the Clarke-Vvedensky (CV) model in simple cubic lattices. The distributions of this number, $N$, are determined in films with average thicknesses close to $50$ and $100$ monolayers for a broad range of values of the diffusion-to-deposition ratio $R$ and of the probability $ε$ that lowers the diffusion coefficient for each lateral neighbor. The mobility of subsurface atoms and the energy barriers for crossing step edges are neglected. Simulations show that the adatoms execute uncorrelated diffusion during the time in which they move on the film surface. In a low temperature regime, typically with $Rε\lesssim 1$, the attachment to lateral neighbors is almost irreversible, the average number of hops scales as $\langle N\rangle \sim R^{0.38\pm 0.01}$, and the distribution of that number decays approximately as $\exp\left[-\left({N/\langle N\rangle}\right)^{0.80\pm 0.07}\right]$. Similar decay is observed in simulations of random walks in a plane with randomly distributed absorbing traps and the estimated relation between $\langle N\rangle$ and the density of terrace steps is similar to that observed in the trap** problem, which provides a conceptual explanation of that regime. As the temperature increases, $\langle N\rangle$ crosses over to another regime when $Rε^{3.0\pm 0.3}\sim 1$, which indicates high mobility of all adatoms at terrace borders. The distributions $P\left( N\right)$ change to simple exponential decays, due to the constant probability for an adatom to become immobile after being covered by a new deposited layer. At higher temperatures, the surfaces become very smooth and $\langle N\rangle \sim Rε^{1.85\pm 0.15}$, which is explained by an analogy with submonolayer growth. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Journal ref: Physical Review E 102, 012805 (2020)

Nonlinear resonant X-ray Raman scattering

Authors: Johann Haber, Andreas Kaldun, Samuel W. Teitelbaum, Alfred Q. R. Baron, Philip H. Bucksbaum, Matthias Fuchs, Jerome B. Hastings, Ichiro Inoue, Yuichi Inubushi, Dietrich Krebs, Taito Osaka, Robin Santra, Sharon Shwartz, Kenji Tamasaku, David A. Reis

Abstract: We report the observation of a novel nonlinear effect in the hard x-ray range. Upon illuminating Fe and Cu metal foils with intense x-ray pulses tuned near their respective K edges, photons at nearly twice the incoming photon energy are emitted. The signal rises quadratically with the incoming intensity, consistent with two-photon excitation. The spectrum of emitted high-energy photons comprises m… ▽ More We report the observation of a novel nonlinear effect in the hard x-ray range. Upon illuminating Fe and Cu metal foils with intense x-ray pulses tuned near their respective K edges, photons at nearly twice the incoming photon energy are emitted. The signal rises quadratically with the incoming intensity, consistent with two-photon excitation. The spectrum of emitted high-energy photons comprises multiple Raman lines that disperse with the incident photon energy. Upon reaching the double K-shell ionization threshold, the signal strength undergoes a marked rise. Above this threshold, the lines cease dispersing, turning into orescence lines with energies much greater than obtainable by single electron transitions, and additional Raman lines appear. We attribute these processes to electron-correlation mediated multielectron transitions involving double-core hole excitation and various two-electron de-excitation processes to a final state involving one or more L and M core-holes. △ Less

Submitted 25 June, 2020; originally announced June 2020.

Comments: 6 pages, 4 figures

Formation of buried domain walls in the ultrafast transition of SmTe$_3$

Authors: M. Trigo, P. Giraldo-Gallo, J. N. Clark, M. E. Kozina, T. Henighan, M. P. Jiang, M. Chollet, I. R. Fisher, J. M. Glownia, T. Katayama, P. S. Kirchmann, D. Leuenberger, H. Liu, D. A. Reis, Z. X. Shen, D. Zhu

Abstract: We study ultrafast x-ray diffraction on the charge density wave (CDW) of SmTe$_3$ using an x-ray free electron laser. The CDW peaks show that photoexcitation with near-infrared pump centered at 800 nm generates domain walls of the order parameter propagating perpendicular to the sample surface. These domain walls break the CDW long range order and suppress the diffraction intensity of the CDW for… ▽ More We study ultrafast x-ray diffraction on the charge density wave (CDW) of SmTe$_3$ using an x-ray free electron laser. The CDW peaks show that photoexcitation with near-infrared pump centered at 800 nm generates domain walls of the order parameter propagating perpendicular to the sample surface. These domain walls break the CDW long range order and suppress the diffraction intensity of the CDW for times much longer than the $\sim 1$~ps recovery of the local electronic gap. We reconstruct the spatial and temporal dependence of the order parameter using a simple Ginzburg-Landau model and find good agreement between the experimental and model fluence dependences. Based on the model we find that at long times, depending on the pump fluence, multiple domain walls remain at distances of few nm from the surface. △ Less

Submitted 15 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. B 103, 054109 (2021)

Thin film growth models with long surface diffusion lengths

Authors: Tung B. T. To, Vitor B. de Sousa, Fábio D. A. Aarão Reis

Abstract: In limited mobility (LM) models of thin film deposition, the final position of each atom or molecule is chosen according to a set of stochastic rules before the incidence of another atom or molecule. Here we investigate the possibility of a LM model to reproduce features of a more realistic approach that represents the interplay of collective adatom diffusion and the external flux. In the LM model… ▽ More In limited mobility (LM) models of thin film deposition, the final position of each atom or molecule is chosen according to a set of stochastic rules before the incidence of another atom or molecule. Here we investigate the possibility of a LM model to reproduce features of a more realistic approach that represents the interplay of collective adatom diffusion and the external flux. In the LM model introduced here, each adatom may execute $G$ hops to neighboring columns of the deposit, but a hop attempt from a site with $n$ lateral neighbors has probability $P^n$, with $P<1$. These rules resemble those of the Clarke-Vvedensky (CV) model without energy barriers at step edges, whose main parameters are the diffusion-to-deposition ratio $R$ on terraces and the detachment probability $ε$ per lateral neighbor. At short times, the roughness of the LM model can be written in terms of a scaling function of $G$ and $P$ and the growth exponent is consistent with the Villain-Lai-Das Sarma universality class. The evolution of the surface roughness and of the autocorrelation function of the CV model is reproduced with reasonable accuracy by the LM model with suitable choices of parameters. The increase of the parameters $G$ and $R$ of those models produces smoother film surfaces, while the increase of $P$ and $ε$ smoothen the terrace boundaries at short lengthscales. However, the detachment probabilities of the two models have very different effects on the surface roughness: in the LM model, for fixed $G$, the surface roughness increases as $P$ increases; in the CV model, the surface smoothens as $ε$ increases, for fixed $R$. This result is related to the non-Markovian nature of the LM model, since the diffusivity of an adatom depends on its history at the film surface and may be severely reduced after a detachment from a terrace step. △ Less

Submitted 8 May, 2020; v1 submitted 9 April, 2020; originally announced April 2020.

Comments: Preprint for a publication in Physica A

Journal ref: Physica A 511 (2018) 240-250

Domain formation in the deposition of thin films of two-component mixtures

Authors: Tung B. T. To, Fábio D. A. Aarão Reis

Abstract: We perform a kinetic Monte Carlo simulation study of a model of thin film deposition of a two-component mixture in which the activation energy for diffusion of an adatom is additive over its nearest neighbors and in which the interactions between adatoms of the same species are stronger than those between adatoms of different species. The film morphology is investigated for broad ranges of values… ▽ More We perform a kinetic Monte Carlo simulation study of a model of thin film deposition of a two-component mixture in which the activation energy for diffusion of an adatom is additive over its nearest neighbors and in which the interactions between adatoms of the same species are stronger than those between adatoms of different species. The film morphology is investigated for broad ranges of values of the ratios between terrace diffusivity and atomic flux, of the probabilities of detachment from lateral neighbors, and of probabilities of crossing terrace edges. First, we consider a symmetric case in which the interactions of adatoms of the same species are the same for the two components. For low and intermediate temperatures, we show the formation of narrow domains, whose widths are $3$-$30$ lattice constants, which meander in the layers parallel to the substrate, and are connected through very long distances. The domain width depends on the diffusivity-flux ratio of the same species, but it is weakly affected by interactions of different species, so rough estimates of that width can be obtained by using tabulated properties of films with a single component. At high temperatures, the separation of domains is enhanced, but their long distance connectivity is lost, which shows that the formation of the long meandering domains is restricted to a certain range of temperature and flux. Similar morphological features are obtained when the intra-species interactions are different and the adatom diffusion coefficients on terraces of the same species differ up to two orders of magnitude. An approximate scaling relation for the domain width is obtained, but the species with the largest mobility constrains the temperature range in which the long connected domains are found. △ Less

Submitted 8 May, 2020; v1 submitted 9 April, 2020; originally announced April 2020.

Comments: Preprint accepted for publication by Journal of Alloys and Compounds

Journal ref: Journal of Alloys and Compounds 835 (2020) 155093(1-14)

On Seminal HEDP Research Opportunities Enabled by Colocating Multi-Petawatt Laser with High-Density Electron Beams

Authors: Sebastian Meuren, Phil H. Bucksbaum, Nathaniel J. Fisch, Frederico Fiúza, Siegfried Glenzer, Mark J. Hogan, Kenan Qu, David A. Reis, Glen White, Vitaly Yakimenko

Abstract: The scientific community is currently witnessing an expensive and worldwide race to achieve the highest possible light intensity. Within the next decade this effort is expected to reach nearly $10^{24}\,\mathrm{W}/\mathrm{cm^2}$ in the lab frame by focusing of 100 PW, near-infrared lasers. A major driving force behind this effort is the possibility to study strong-field vacuum breakdown and an acc… ▽ More The scientific community is currently witnessing an expensive and worldwide race to achieve the highest possible light intensity. Within the next decade this effort is expected to reach nearly $10^{24}\,\mathrm{W}/\mathrm{cm^2}$ in the lab frame by focusing of 100 PW, near-infrared lasers. A major driving force behind this effort is the possibility to study strong-field vacuum breakdown and an accompanying electron-positron pair plasma via a quantum electrodynamic (QED) cascade [Edwin Cartlidge, "The light fantastic", Science 359, 382 (2018)]. Whereas Europe is focusing on all-optical 10 PW-class laser facilities (e.g., Apollon and ELI), China is already planning on co-locating a 100 PW laser system with a 25 keV superconducting XFEL and thus implicitly also a high-quality electron beam [Station of Extreme Light (SEL) at the Shanghai Superintense-Ultrafast Lasers Facility (SULF)]. This white paper elucidates the seminal scientific opportunities facilitated by colliding dense, multi-GeV electron beams with multi-PW optical laser pulses. Such a multi-beam facility would enable the experimental exploration of extreme HEDP environments by generating electron-positron pair plasmas with unprecedented densities and temperatures, where the interplay between strong-field quantum and collective plasma effects becomes decisive. △ Less

Submitted 23 February, 2020; originally announced February 2020.

Comments: 11 pages, 1 figure, 1 table

Attosecond synchronization of extreme ultraviolet high harmonics from crystals

Authors: Giulio Vampa, Jian Lu, Yong Sing You, Denitsa R. Baykusheva, Mengxi Wu, Hanzhe Liu, Kenneth J. Schafer, Mette B. Gaarde, David A. Reis, Shambhu Ghimire

Abstract: The interaction of strong near-infrared (NIR) laser pulses with wide-bandgap dielectrics produces high harmonics in the extreme ultraviolet (XUV) wavelength range. These observations have opened up the possibility of attosecond metrology in solids, which would benefit from a precise measurement of the emission times of individual harmonics with respect to the NIR laser field. Here we show that, wh… ▽ More The interaction of strong near-infrared (NIR) laser pulses with wide-bandgap dielectrics produces high harmonics in the extreme ultraviolet (XUV) wavelength range. These observations have opened up the possibility of attosecond metrology in solids, which would benefit from a precise measurement of the emission times of individual harmonics with respect to the NIR laser field. Here we show that, when high-harmonics are detected from the input surface of a magnesium oxide crystal, a bichromatic probing of the XUV emission shows a clear synchronization largely consistent with a semiclassical model of electron-hole recollisions in bulk solids. On the other hand, the bichromatic spectrogram of harmonics originating from the exit surface of the 200 $μ$m-thick crystal is strongly modified, indicating the influence of laser field distortions during propagation. Our tracking of sub-cycle electron and hole re-collisions at XUV energies is relevant to the development of solid-state sources of attosecond pulses. △ Less

Submitted 27 January, 2020; originally announced January 2020.

Measurements of Nonequilibrium Interatomic Forces in Photoexcited Bismuth

Authors: Samuel W. Teitelbaum, Thomas C. Henighan, Hanzhe Liu, Mason P. Jiang, Diling Zhu, Matthieu Chollet, Takahiro Sato, Éamonn D. Murray, Stephen Fahy, Shane O'Mahony, Trevor P. Bailey, Ctirad Uher, Mariano Trigo, David A. Reis

Abstract: We determine experimentally the excited-state interatomic forces in photoexcited bismuth. The forces are obtained by a constrained least-squares fit of the excited-state dispersion obtained by femtosecond time-resolved x-ray diffuse scattering to a fifteen-nearest neighbor Born-von Karman model. We find that the observed softening of the zone-center $A_{1g}$ optical mode and transverse acoustic mo… ▽ More We determine experimentally the excited-state interatomic forces in photoexcited bismuth. The forces are obtained by a constrained least-squares fit of the excited-state dispersion obtained by femtosecond time-resolved x-ray diffuse scattering to a fifteen-nearest neighbor Born-von Karman model. We find that the observed softening of the zone-center $A_{1g}$ optical mode and transverse acoustic modes with photoexcitation are primarily due to a weakening of three nearest neighbor forces along the bonding direction. This provides a more complete picture of what drives the partial reversal of the Peierls distortion previously observed in photoexcited bismuth. △ Less

Submitted 20 August, 2019; originally announced August 2019.

Comments: 6 pages, 3 figures, plus 3 pages, 3 figures of supplemental information

Journal ref: Phys. Rev. B 103, 180101 (2021)

Overcoming the absorption limit in high-harmonic generation from crystals

Authors: Hanzhe Liu, Giulio Vampa, **gyuan Linda Zhang, Yu Shi, Siddharth Buddhiraju, Shanhui Fan, Jelena Vuckovic, Philip H. Bucksbaum, David A. Reis

Abstract: Since the new millennium coherent extreme ultra-violet and soft x-ray radiation has revolutionized the understanding of dynamical physical, chemical and biological systems at the electron's natural timescale. Unfortunately, coherent laser-based upconversion of infrared photons to vacuum-ultraviolet and soft x-ray high-order harmonics in gaseous, liquid and solid targets is notoriously inefficient.… ▽ More Since the new millennium coherent extreme ultra-violet and soft x-ray radiation has revolutionized the understanding of dynamical physical, chemical and biological systems at the electron's natural timescale. Unfortunately, coherent laser-based upconversion of infrared photons to vacuum-ultraviolet and soft x-ray high-order harmonics in gaseous, liquid and solid targets is notoriously inefficient. In dense nonlinear media, the limiting factor is strong re-absorption of the generated high-energy photons. Here we overcome this limitation by allowing high-order harmonics generated from a periodic array of thin one-dimensional crystalline silicon ridge waveguides to propagate in the vacuum gaps between the ridges, thereby avoiding the high absorption loss of the bulk nonlinear material and resulting in a ~ 100-fold increase in propagation length. As the grating period is varied, each high-harmonic shows a different and marked modulation, indicating the onset of coherent addition which is otherwise suppressed in absorption-limited emission. By beating the absorption limit, our results pave the way for bright coherent short-wavelength sources and their implementation in nano-photonic devices. △ Less

Submitted 7 May, 2019; originally announced May 2019.

Models of infiltration into homogeneous and fractal porous media with localized sources

Authors: Fabio D. A. Aarao Reis, Vaughan R. Voller

Abstract: We study a random walk infiltration (RWI) model, in homogeneous and in fractal media, with localized sources at their boundaries. The particles released at a source, which is maintained at a constant density, execute unbiased random walks over a lattice; it represents solute infiltration by diffusion into a medium in contact with a reservoir. A scaling approach shows that the infiltrated length, a… ▽ More We study a random walk infiltration (RWI) model, in homogeneous and in fractal media, with localized sources at their boundaries. The particles released at a source, which is maintained at a constant density, execute unbiased random walks over a lattice; it represents solute infiltration by diffusion into a medium in contact with a reservoir. A scaling approach shows that the infiltrated length, area, or volume evolves in time as the number of distinct sites visited by a single random walker in the same medium. This is consistent with simulations of the lattice model and exact and numerical solutions of the corresponding diffusion equation. In a Sierpinski carpet, the infiltrated area is expected to evolve as t^{D_F/D_W} (Alexander-Orbach relation), where D_F is the fractal dimension of the medium and D_W is the random walk dimension; the numerical integration of the diffusion equation supports this relation and improves results of lattice random walk simulations. In a Menger sponge in which D_F>D_W (a fractal with a dimension close to 3), a linear time increase of the infiltrated volume is predicted and confirmed numerically. Thus, no evidence of fractality can be observed in infiltrated volumes or masses in media where random walks are not recurrent, although the tracer diffusion is anomalous. We compare our results with a fluid infiltration model in which the pressure head is constant at the source and the front displacement is driven by the local gradient of that head. Exact or numerical solutions in two and three dimensions and in a carpet show that this type of fluid infiltration is in the same universality class of RWI, with an equivalence between the head and the particle concentration. These results set a relation between different infiltration processes with localized sources and the recurrence properties of random walks in the same media. △ Less

Submitted 10 April, 2019; originally announced April 2019.

Comments: 11 pages, 12 figures included

Journal ref: Phys. Rev. E 99, 042111 (2019)

Scientific Opportunities with an X-ray Free-Electron Laser Oscillator

Authors: Bernhard Adams, Gabriel Aeppli, Thomas Allison, Alfred Q. R. Baron, Phillip Bucksbaum, Aleksandr I. Chumakov, Christopher Corder, Stephen P. Cramer, Serena DeBeer, Yuntao Ding, Jörg Evers, Josef Frisch, Matthias Fuchs, Gerhard Grübel, Jerome B. Hastings, Christoph M. Heyl, Leo Holberg, Zhirong Huang, Tetsuya Ishikawa, Andreas Kaldun, Kwang-Je Kim, Tomasz Kolodziej, Jacek Krzywinski, Zheng Li, Wen-Te Liao , et al. (25 additional authors not shown)

Abstract: An X-ray free-electron laser oscillator (XFELO) is a new type of hard X-ray source that would produce fully coherent pulses with meV bandwidth and stable intensity. The XFELO complements existing sources based on self-amplified spontaneous emission (SASE) from high-gain X-ray free-electron lasers (XFEL) that produce ultra-short pulses with broad-band chaotic spectra. This report is based on discus… ▽ More An X-ray free-electron laser oscillator (XFELO) is a new type of hard X-ray source that would produce fully coherent pulses with meV bandwidth and stable intensity. The XFELO complements existing sources based on self-amplified spontaneous emission (SASE) from high-gain X-ray free-electron lasers (XFEL) that produce ultra-short pulses with broad-band chaotic spectra. This report is based on discussions of scientific opportunities enabled by an XFELO during a workshop held at SLAC on June 29 - July 1, 2016 △ Less

Submitted 25 March, 2019; v1 submitted 18 March, 2019; originally announced March 2019.

Comments: 21 pages, 12 figures

Multiple Fourier Component Analysis of X-ray Second Harmonic Generation in Diamond

Authors: P. Chakraborti, B. Senfftleben, B. Kettle, S. W. Teitelbaum, P. H. Bucksbaum, S. Ghimire, J. B. Hastings, H. Liu, S. Nelson, T. Sato, S. Shwartz, Y. Sun, C. Weninger, D. Zhu, D. A. Reis, M. Fuchs

Abstract: The unprecedented brilliance of X-ray free-electron lasers (XFELs) [1, 2] has enabled first studies of nonlinear interactions in the hard X-ray range. In particular, X-ray-optical mixing [3], X-ray second harmonic generation (XSHG) [4] and nonlinear Compton scattering (NLCS) [5] have been recently observed for the first time using XFELs. The former two experiments as well as X-ray parametric downc… ▽ More The unprecedented brilliance of X-ray free-electron lasers (XFELs) [1, 2] has enabled first studies of nonlinear interactions in the hard X-ray range. In particular, X-ray-optical mixing [3], X-ray second harmonic generation (XSHG) [4] and nonlinear Compton scattering (NLCS) [5] have been recently observed for the first time using XFELs. The former two experiments as well as X-ray parametric downconversion (XPDC)[6, 7] are well explained by nonlinearities in the impulse approximation[8], where electrons in a solid target are assumed to be quasi free for X-ray interactions far from atomic resonances. However, the energy of the photons generated in NLCS at intensities reaching up to 4 x 1020 W/cm2 exhibit an anomalous red-shift that is in violation with the free-electron model. Here we investigate the underlying physics of X-ray nonlinear interactions at intensities on order of 1016 W/cm2. Specifically, we perform a systematic study of XSHG in diamond. While one phase-matching geometry has been measured in Shwartz et al.[4], we extend these studies to multiple Fourier components and with significantly higher statistics, which allows us to determine the second order nonlinear structure factor. We measure the efficiency, angular dependence, and contributions from different source terms of the process. We find good agreement of our measurements with the quasi-free electron model. △ Less

Submitted 7 March, 2019; originally announced March 2019.

Crossover from compact to branched films in electrodeposition with surface diffusion

Authors: F. D. A. Aarão Reis, Dung di Caprio, Abdelhafed Taleb

Abstract: We study a model for thin film electrodeposition in which instability development by preferential adsorption and reduction of cations at surface peaks competes with surface relaxation by diffusion of the adsorbates. The model considers cations moving in a supported electrolyte, adsorption and reduction when they reach the film surface, and consequent production of mobile particles that execute act… ▽ More We study a model for thin film electrodeposition in which instability development by preferential adsorption and reduction of cations at surface peaks competes with surface relaxation by diffusion of the adsorbates. The model considers cations moving in a supported electrolyte, adsorption and reduction when they reach the film surface, and consequent production of mobile particles that execute activated surface diffusion, which is represented by a sequence of random hops to neighboring lattice sites with a maximum of G hop attempts (G>>1), a detachment probability epsilon<1 per neighboring particle, and a no-desorption condition. Computer simulations show the formation of a compact wetting layer followed by the growth of branched deposits. The maximal thickness z_c of that layer increases with G, but is weakly affected by epsilon. A scaling approach describes the crossover from smooth film growth to unstable growth and predicts z_c ~ G^gamma, with gamma = 1/[2(1-nu)] = 0.43, where nu=0.30 is the inverse of the dynamical exponent of the Villain-Lai-Das Sarma equation that describes the initial roughening. Using previous results for related deposition models, the thickness z_c can be predicted as a function of an activation energy for terrace surface diffusion and the temperature, and the small effects of the parameter epsilon are justified. These predictions are confirmed by the numerical results with good accuracy. We discuss possible applications, with a particular focus on the growth of multifuncional structures with stacking layers of different porosity. △ Less

Submitted 3 March, 2019; originally announced March 2019.

Comments: Two-column format with 12 pages, 7 figures included

Journal ref: Phys. Rev. E 96, 022805 (2017)

Interface Collisions

Authors: Fabio D. A. Aarao Reis, Olivier Pierre-Louis

Abstract: We provide a theoretical framework to analyze the properties of frontal collisions of two growing interfaces considering different short range interactions between them. Due to their roughness, the collision events spread in time and form rough domain boundaries, which defines collision interfaces in time and space. We show that statistical properties of such interfaces depend on the kinetics of t… ▽ More We provide a theoretical framework to analyze the properties of frontal collisions of two growing interfaces considering different short range interactions between them. Due to their roughness, the collision events spread in time and form rough domain boundaries, which defines collision interfaces in time and space. We show that statistical properties of such interfaces depend on the kinetics of the growing interfaces before collision, but are independent of the details of their interaction and of their fluctuations during the collision. Those properties exhibit dynamic scaling with exponents related to the growth kinetics, but their distributions may be non-universal. These results are supported by simulations of lattice models with irreversible dynamics and local interactions. Relations to first passage processes are discussed and a possible application to grain boundary formation in two-dimensional materials is suggested. △ Less

Submitted 3 February, 2019; originally announced February 2019.

Comments: Paper with 12 pages and 2 figures; supplemental material with 4 pages and 3 figures

Journal ref: Phys. Rev. E 97, 040801(R) (2018)

Theory of x-ray scattering from laser-driven electronic systems

Authors: Daria Popova-Gorelova, David A. Reis, Robin Santra

Abstract: We describe, within the framework of quantum electrodynamics, an interaction between a non-resonant hard x-ray pulse and an electronic system in the presence of a temporally periodic laser field driving electron dynamics in this system. We apply Floquet theory to describe the laser-driven electronic system, and then obtain the scattering probability of an arbitrary nonresonant x-ray pulse from suc… ▽ More We describe, within the framework of quantum electrodynamics, an interaction between a non-resonant hard x-ray pulse and an electronic system in the presence of a temporally periodic laser field driving electron dynamics in this system. We apply Floquet theory to describe the laser-driven electronic system, and then obtain the scattering probability of an arbitrary nonresonant x-ray pulse from such a system employing the density-matrix formalism. We show that the scattering probability can be connected to the time-dependent electron density of the driven electronic system only under certain conditions, in particular, if the bandwidth of the probe x-ray pulse is sufficiently narrow to spectroscopically resolve transitions to different final states. A special focus is laid on application of the theory to laser-driven crystals in a strongly nonperturbative regime. We show how the time-dependent electron density of a crystal can be reconstructed from energy-resolved scattering patterns. This is illustrated by a calculation of a diffraction signal from a driven MgO crystal. △ Less

Submitted 6 November, 2018; originally announced November 2018.

Comments: accepted to Phys Rev B

Journal ref: Physical Review B 98, 224302 (2018)

Coherent order parameter dynamics in SmTe$_3$

Authors: M. Trigo, P. Giraldo-Gallo, M. E. Kozina, T. Henighan, M. P. Jiang, H. Liu, J. N. Clark, M. Chollet, J. M. Glownia, D. Zhu, T. Katayama, D. Leuenberger, P. S. Kirchmann, I. R. Fisher, Z. X. Shen, D. A. Reis

Abstract: We present a combined ultrafast optical pump-probe and ultrafast x-ray diffraction measurement of the CDW dynamics in SmTe$_3$ at 300 K. The ultrafast x-ray diffraction measurements, taken at the Linac Coherent Light Source reveal a $\sim 1.55$ THz mode that becomes overdamped with increasing fluence. We identify this oscillation with the lattice component of the amplitude mode. Furthermore, these… ▽ More We present a combined ultrafast optical pump-probe and ultrafast x-ray diffraction measurement of the CDW dynamics in SmTe$_3$ at 300 K. The ultrafast x-ray diffraction measurements, taken at the Linac Coherent Light Source reveal a $\sim 1.55$ THz mode that becomes overdamped with increasing fluence. We identify this oscillation with the lattice component of the amplitude mode. Furthermore, these data allow for a more clear identification of the frequencies present in the optical pump-probe data. In both, reflectivity and diffraction, we observe a crossover of the response from linear (for small displacements) to quadratic in the amplitude of the order parameter displacement. Finally, a time-dependent Ginzburg-Landau model captures the essential features of the experimental observations. △ Less

Submitted 26 September, 2018; originally announced September 2018.

Comments: 7 pages, 5 figures

Journal ref: Phys. Rev. B 99, 104111 (2019)

Enhanced High-Harmonic Generation from an All-Dielectric Metasurface

Authors: Hanzhe Liu, Cheng Guo, Giulio Vampa, **gyuan Linda Zhang, Tomas Sarmiento, Meng Xiao, Philip H. Bucksbaum, Jelena Vučković, Shanhui Fan, David A. Reis

Abstract: The recent observation of high-harmonic generation from solids creates a new possibility for engineering fundamental strong-field processes by patterning the solid target with subwavelength nanostructures. All-dielectric metasurfaces exhibit high damage thresholds and strong enhancement of the driving field, making them attractive platforms to control high-harmonics and other high-field processes… ▽ More The recent observation of high-harmonic generation from solids creates a new possibility for engineering fundamental strong-field processes by patterning the solid target with subwavelength nanostructures. All-dielectric metasurfaces exhibit high damage thresholds and strong enhancement of the driving field, making them attractive platforms to control high-harmonics and other high-field processes at nanoscales. Here we report enhanced non-perturbative high-harmonic emission from a Si metasurface that possesses a sharp Fano resonance resulting from a classical analogue of electromagnetically induced transparency. Harmonic emission is enhanced by more than two orders of magnitude compared to unpatterned samples. The enhanced high harmonics are highly anisotropic with excitation polarization and are selective to excitation wavelength due to its resonant feature. By combining nanofabrication technology and ultrafast strong-field physics, our work paves the way for designing new compact ultrafast photonic devices that operate under high intensities and short wavelengths. △ Less

Submitted 11 October, 2017; originally announced October 2017.

Comments: 14 pages, 4 figures

Direct Measurement of Anharmonic Decay Channels of a Coherent Phonon

Authors: Samuel W. Teitelbaum, Tom Henighan, Yi**g Huang, Hanzhe Liu, Mason P. Jiang, Diling Zhu, Matthieu Chollet, Takahiro Sato, Éamonn D. Murray, Stephen Fahy, Shane O'Mahony, Trevor P. Bailey, Ctirad Uher, Mariano Trigo, David A. Reis

Abstract: We observe anharmonic decay of the photoexcited coherent A1g phonon in bismuth to points in the Brillouin zone where conservation of momentum and energy are satisfied for three-phonon scattering. The decay of a coherent phonon can be understood as a parametric resonance process whereby the atomic displacement periodically modulates the frequency of a broad continuum of modes. This results in energ… ▽ More We observe anharmonic decay of the photoexcited coherent A1g phonon in bismuth to points in the Brillouin zone where conservation of momentum and energy are satisfied for three-phonon scattering. The decay of a coherent phonon can be understood as a parametric resonance process whereby the atomic displacement periodically modulates the frequency of a broad continuum of modes. This results in energy transfer through resonant squeezing of the target modes. Using ultrafast diffuse x-ray scattering, we observe build up of coherent oscillations in the target modes driven by this parametric resonance over a wide range of the Brillouin zone. We compare the extracted anharmonic coupling constant to first principles calculations for a representative decay channel. △ Less

Submitted 20 October, 2017; v1 submitted 5 October, 2017; originally announced October 2017.

Comments: 5 pages, 6 figures

Journal ref: Phys. Rev. Lett. 121, 125901 (2018)

Effects of porosity in a model of corrosion and passive layer growth

Authors: F. D. A. Aarão Reis

Abstract: We introduce a stochastic lattice model to investigate the effects of pore formation in a passive layer grown with products of metal corrosion. It considers that an anionic species diffuses across that layer and reacts at the corrosion front (metal-oxide interface), producing a random distribution of compact regions and large pores, respectively represented by O (oxide) and P (pore) sites. O sites… ▽ More We introduce a stochastic lattice model to investigate the effects of pore formation in a passive layer grown with products of metal corrosion. It considers that an anionic species diffuses across that layer and reacts at the corrosion front (metal-oxide interface), producing a random distribution of compact regions and large pores, respectively represented by O (oxide) and P (pore) sites. O sites are assumed to have very small pores, so that the fraction $Φ$ of P sites is an estimate of the porosity, and the ratio between anion diffusion coefficients in those regions is $D_{\text r}<1$. Simulation results without the large pores ($Φ=0$) are similar to those of a formerly studied model of corrosion and passivation and are explained by a scaling approach. If $Φ>0$ and $D_{\text r}\ll 1$, significant changes are observed in passive layer growth and corrosion front roughness. For small $Φ$, a slowdown of the growth rate is observed, which is interpreted as a consequence of the confinement of anions in isolated pores for long times. However, the presence of large pores near the corrosion front increases the frequency of reactions at those regions, which leads to an increase in the roughness of that front. This model may be a first step to represent defects in a passive layer which favor pitting corrosion. △ Less

Submitted 4 October, 2017; originally announced October 2017.

Comments: 8 pages, 6 figures

Journal ref: Condens. Matter Phys., 2017, vol. 20, No. 3, 33803

Scaling relations in the diffusive infiltration in fractals

Authors: F. D. A. Aarao Reis

Abstract: In a recent work on fluid infiltration in a Hele-Shaw cell with the pore-block geometry of Sierpinski carpets (SCs), the area filled by the invading fluid was shown to scale as F~t^n, with n<1/2, thus providing a macroscopic realization of anomalous diffusion [Filipovitch et al, Water Resour. Res. 52 5167 (2016)]. The results agree with simulations of a diffusion equation with constant pressure at… ▽ More In a recent work on fluid infiltration in a Hele-Shaw cell with the pore-block geometry of Sierpinski carpets (SCs), the area filled by the invading fluid was shown to scale as F~t^n, with n<1/2, thus providing a macroscopic realization of anomalous diffusion [Filipovitch et al, Water Resour. Res. 52 5167 (2016)]. The results agree with simulations of a diffusion equation with constant pressure at one of the borders of those fractals, but the exponent n is very different from the anomalous exponent nu=1/D_W of single particle diffusion in the same fractals (D_W is the random walk dimension). Here we use a scaling approach to show that those exponents are related as n=nu(D_F-D_B), where D_F and D_B are the fractal dimensions of the bulk and of the border from which diffusing particles come, respectively. This relation is supported by accurate numerical estimates in two SCs and in two generalized Menger sponges (MSs), in which we performed simulations of single particle random walks (RWs) with a rigid impermeable border and of a diffusive infiltration model in which that border is permanently filled with diffusing particles. This study includes one MS whose external border is also fractal. The exponent relation is also consistent with the recent simulational and experimental results on fluid infiltration in SCs, and explains the approximate quadratic dependence of n on D_F in these fractals. We also show that the mean-square displacement of single particle RWs has log-periodic oscillations, whose periods are similar for fractals with the same scaling factor in the generator (even with different embedding dimensions), which is consistent with the discrete scale invariance scenario. The roughness of a diffusion front defined in the infiltration problem also shows this type of oscillation, which is enhanced in fractals with narrow channels between large lacunas. △ Less

Submitted 23 May, 2017; originally announced May 2017.

Comments: 17 pages with 11 figures

Journal ref: Phys. Rev. E 94, 052124 (2016)

Random sequential adsorption of polydisperse mixtures on lattices

Authors: Rogerio Costa Hart, Fabio David Alves Aarão Reis

Abstract: Random sequential adsorption of linear and square particles with excluded volume interaction is studied numerically on planar lattices considering Gaussian distributions of lateral sizes of the incident particles, with several values of the average and of the width-to-average ratio $w$. When the coverage is plotted as function of the logarithm of time $t$, the maximum slope is attained at a time… ▽ More Random sequential adsorption of linear and square particles with excluded volume interaction is studied numerically on planar lattices considering Gaussian distributions of lateral sizes of the incident particles, with several values of the average and of the width-to-average ratio $w$. When the coverage is plotted as function of the logarithm of time $t$, the maximum slope is attained at a time $t_M$ of the same order of the time $τ$ of incidence of one monolayer, which is related to the molecular flux and/or sticking coefficients. For various values of the average $μ$ and $w$, we obtain $1.5τ< t_M < 5τ$ for linear particles and $.3τ< t_M < τ$ for square particles. At $t_M$, the coverages with linear and square particles are near .3 and .2, respectively. Extrapolations show that coverages may vary with $μ$ up to 20% and 2% for linear and square particles, respectively, for $μ\ge 64$, fixed time, and constant $w$. All coverage $θ$ versus $\log t$ plots have approximately the same shape, but other quantities measured at times of order $t_M$ help to distinguish narrow and broad incident distributions. The adsorbed particle size distributions are close to the incident ones up to long times for small $w$, but appreciably change in time for larger $w$, acquiring a monotonically decreasing shape for $w = 1/2$ at times of order $100τ$ . At $t_M$, incident and adsorbed distributions are approximately the same for $w \le 1/8$ and show significant differences for $w \ge 1/2$; this result may be used as a consistency test in applications of the model. The pair correlation function $g (r; t)$ for $w = 1/8$ has a well defined oscillatory structure at $10t_M$, with a minimum at $r\approxμ$ and maximum at $r \approx 1.5μ$, but this structure is not observed for $w \ge 1/4$. △ Less

Submitted 9 August, 2016; originally announced August 2016.

Comments: 15 pages, 14 figures