-
Shower Separation in Five Dimensions for Highly Granular Calorimeters using Machine Learning
Authors:
S. Lai,
J. Utehs,
A. Wilhahn,
M. C. Fouz,
O. Bach,
E. Brianne,
A. Ebrahimi,
K. Gadow,
P. Göttlicher,
O. Hartbrich,
D. Heuchel,
A. Irles,
K. Krüger,
J. Kvasnicka,
S. Lu,
C. Neubüser,
A. Provenza,
M. Reinecke,
F. Sefkow,
S. Schuwalow,
M. De Silva,
Y. Sudo,
H. L. Tran,
L. Liu,
R. Masuda
, et al. (26 additional authors not shown)
Abstract:
To achieve state-of-the-art jet energy resolution for Particle Flow, sophisticated energy clustering algorithms must be developed that can fully exploit available information to separate energy deposits from charged and neutral particles. Three published neural network-based shower separation models were applied to simulation and experimental data to measure the performance of the highly granular…
▽ More
To achieve state-of-the-art jet energy resolution for Particle Flow, sophisticated energy clustering algorithms must be developed that can fully exploit available information to separate energy deposits from charged and neutral particles. Three published neural network-based shower separation models were applied to simulation and experimental data to measure the performance of the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL) technological prototype in distinguishing the energy deposited by a single charged and single neutral hadron for Particle Flow. The performance of models trained using only standard spatial and energy and charged track position information from an event was compared to models trained using timing information available from AHCAL, which is expected to improve sensitivity to shower development and, therefore, aid in clustering. Both simulation and experimental data were used to train and test the models and their performances were compared. The best-performing neural network achieved significantly superior event reconstruction when timing information was utilised in training for the case where the charged hadron had more energy than the neutral one, motivating temporally sensitive calorimeters. All models under test were observed to tend to allocate energy deposited by the more energetic of the two showers to the less energetic one. Similar shower reconstruction performance was observed for a model trained on simulation and applied to data and a model trained and applied to data.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
$\texttt{cunuSHT}$: GPU Accelerated Spherical Harmonic Transforms on Arbitrary Pixelizations
Authors:
Sebastian Belkner,
Adriaan J. Duivenvoorden,
Julien Carron,
Nathanael Schaeffer,
Martin Reinecke
Abstract:
We present $\texttt{cunusht}$, a general-purpose Python package that wraps a highly efficient CUDA implementation of the nonuniform spin-$0$ spherical harmonic transform. The method is applicable to arbitrary pixelization schemes, including schemes constructed from equally-spaced iso-latitude rings as well as completely nonuniform ones. The algorithm has an asymptotic scaling of…
▽ More
We present $\texttt{cunusht}$, a general-purpose Python package that wraps a highly efficient CUDA implementation of the nonuniform spin-$0$ spherical harmonic transform. The method is applicable to arbitrary pixelization schemes, including schemes constructed from equally-spaced iso-latitude rings as well as completely nonuniform ones. The algorithm has an asymptotic scaling of $\mathrm{O}{(\ell_{\rm max}^3)}$ for maximum multipole $\ell_{\rm max}$ and achieves machine precision accuracy. While $\texttt{cunusht}$ is developed for applications in cosmology in mind, it is applicable to various other interpolation problems on the sphere. We outperform the fastest available CPU algorithm by a factor of up to 5 for problems with a nonuniform pixelization and $\ell_{\rm max}>4\cdot10^3$ when comparing a single modern GPU to a modern 32-core CPU. This performance is achieved by utilizing the double Fourier sphere method in combination with the nonuniform fast Fourier transform and by avoiding transfers between the host and device. For scenarios without GPU availability, $\texttt{cunusht}$ wraps existing CPU libraries. $\texttt{cunusht}$ is publicly available and includes tests, documentation, and demonstrations.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Ray-tracing vs. Born approximation in full-sky weak lensing simulations of the MillenniumTNG project
Authors:
Fulvio Ferlito,
Christopher T. Davies,
Volker Springel,
Martin Reinecke,
Alessandro Greco,
Ana Maria Delgado,
Simon D. M. White,
César Hernández-Aguayo,
Sownak Bose,
Lars Hernquist
Abstract:
Weak gravitational lensing is a powerful tool for precision tests of cosmology. As the expected deflection angles are small, predictions based on non-linear N-body simulations are commonly computed with the Born approximation. Here we examine this assumption using ${\small DORIAN}$, a newly developed full-sky ray-tracing scheme applied to high-resolution mass-shell outputs of the two largest simul…
▽ More
Weak gravitational lensing is a powerful tool for precision tests of cosmology. As the expected deflection angles are small, predictions based on non-linear N-body simulations are commonly computed with the Born approximation. Here we examine this assumption using ${\small DORIAN}$, a newly developed full-sky ray-tracing scheme applied to high-resolution mass-shell outputs of the two largest simulations in the MillenniumTNG suite, each with a 3000 Mpc box containing almost 1.1 trillion cold dark matter particles in addition to 16.7 billion particles representing massive neutrinos. We examine simple two-point statistics like the angular power spectrum of the convergence field, as well as statistics sensitive to higher order correlations such as peak and minimum statistics, void statistics, and Minkowski functionals of the convergence maps. Overall, we find only small differences between the Born approximation and a full ray-tracing treatment. While these are negligibly small at power-spectrum level, some higher order statistics show more sizable effects; ray-tracing is necessary to achieve percent level precision. At the resolution reached here, full-sky maps with 0.8 billion pixels and an angular resolution of 0.43 arcmin, we find that interpolation accuracy can introduce appreciable errors in ray-tracing results. We therefore implemented an interpolation method based on nonuniform fast Fourier transforms (NUFFT) along with more traditional methods. Bilinear interpolation introduces significant smoothing, while nearest grid point sampling agrees well with NUFFT, at least for our fiducial source redshift, $z_s=1.0$, and for the 1 arcmin smoothing we use for higher-order statistics.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
JAXbind: Bind any function to JAX
Authors:
Jakob Roth,
Martin Reinecke,
Gordian Edenhofer
Abstract:
JAX is widely used in machine learning and scientific computing, the latter of which often relies on existing high-performance code that we would ideally like to incorporate into JAX. Reimplementing the existing code in JAX is often impractical and the existing interface in JAX for binding custom code either limits the user to a single Jacobian product or requires deep knowledge of JAX and its C++…
▽ More
JAX is widely used in machine learning and scientific computing, the latter of which often relies on existing high-performance code that we would ideally like to incorporate into JAX. Reimplementing the existing code in JAX is often impractical and the existing interface in JAX for binding custom code either limits the user to a single Jacobian product or requires deep knowledge of JAX and its C++ backend for general Jacobian products. With JAXbind we drastically reduce the effort required to bind custom functions implemented in other programming languages with full support for Jacobian-vector products and vector-Jacobian products to JAX. Specifically, JAXbind provides an easy-to-use Python interface for defining custom, so-called JAX primitives. Via JAXbind, any function callable from Python can be exposed as a JAX primitive. JAXbind allows a user to interface the JAX function transformation engine with custom derivatives and batching rules, enabling all JAX transformations for the custom primitive.
△ Less
Submitted 27 June, 2024; v1 submitted 13 March, 2024;
originally announced March 2024.
-
Software Compensation for Highly Granular Calorimeters using Machine Learning
Authors:
S. Lai,
J. Utehs,
A. Wilhahn,
O. Bach,
E. Brianne,
A. Ebrahimi,
K. Gadow,
P. Göttlicher,
O. Hartbrich,
D. Heuchel,
A. Irles,
K. Krüger,
J. Kvasnicka,
S. Lu,
C. Neubüser,
A. Provenza,
M. Reinecke,
F. Sefkow,
S. Schuwalow,
M. De Silva,
Y. Sudo,
H. L. Tran,
E. Buhmann,
E. Garutti,
S. Huck
, et al. (39 additional authors not shown)
Abstract:
A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy w…
▽ More
A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy weighting and a time-dependent threshold for enhancing energy deposits consistent with the timescale of evaporation neutrons. Additionally, it was observed to learn an energy-weighting indicative of longitudinal leakage correction. In addition, the method produced a linear detector response and outperformed a published control method regarding resolution for every particle energy studied.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
How much information can be extracted from galaxy clustering at the field level?
Authors:
Nhat-Minh Nguyen,
Fabian Schmidt,
Beatriz Tucci,
Martin Reinecke,
Andrija Kostić
Abstract:
We present optimal Bayesian field-level cosmological constraints from nonlinear tracers of the large-scale structure, specifically the amplitude $σ_8$ of linear matter fluctuations inferred from rest-frame simulated dark matter halos in a comoving volume of $8\,(h^{-1}\mathrm{Gpc})^3$. Our constraint on $σ_8$ is entirely due to nonlinear information, and obtained by explicitly sampling the initial…
▽ More
We present optimal Bayesian field-level cosmological constraints from nonlinear tracers of the large-scale structure, specifically the amplitude $σ_8$ of linear matter fluctuations inferred from rest-frame simulated dark matter halos in a comoving volume of $8\,(h^{-1}\mathrm{Gpc})^3$. Our constraint on $σ_8$ is entirely due to nonlinear information, and obtained by explicitly sampling the initial conditions along with bias and noise parameters via a Lagrangian EFT-based forward model, LEFTfield. The comparison with a simulation-based inference analysis employing the power spectrum and bispectrum -- likewise using the LEFTfield forward model -- shows that, when including precisely the same modes of the same data up to $k_{\mathrm{max}}= 0.10\,h\,\mathrm{Mpc}^{-1}$ ($0.12\,h\,\mathrm{Mpc}^{-1}$), the field-level approach yields a factor of 3.5 (5.2) improvement on the $σ_8$ constraint, from 20.0% to 5.7% (17.0% to 3.3%). This study provides direct insights into cosmological information encoded in galaxy clustering beyond low-order $n$-point functions.
△ Less
Submitted 2 April, 2024; v1 submitted 5 March, 2024;
originally announced March 2024.
-
Doing the right thing for the right reason: Evaluating artificial moral cognition by probing cost insensitivity
Authors:
Yiran Mao,
Madeline G. Reinecke,
Markus Kunesch,
Edgar A. Duéñez-Guzmán,
Ramona Comanescu,
Julia Haas,
Joel Z. Leibo
Abstract:
Is it possible to evaluate the moral cognition of complex artificial agents? In this work, we take a look at one aspect of morality: `doing the right thing for the right reasons.' We propose a behavior-based analysis of artificial moral cognition which could also be applied to humans to facilitate like-for-like comparison. Morally-motivated behavior should persist despite mounting cost; by measuri…
▽ More
Is it possible to evaluate the moral cognition of complex artificial agents? In this work, we take a look at one aspect of morality: `doing the right thing for the right reasons.' We propose a behavior-based analysis of artificial moral cognition which could also be applied to humans to facilitate like-for-like comparison. Morally-motivated behavior should persist despite mounting cost; by measuring an agent's sensitivity to this cost, we gain deeper insight into underlying motivations. We apply this evaluation to a particular set of deep reinforcement learning agents, trained by memory-based meta-reinforcement learning. Our results indicate that agents trained with a reward function that includes other-regarding preferences perform hel** behavior in a way that is less sensitive to increasing cost than agents trained with more self-interested preferences.
△ Less
Submitted 29 May, 2023;
originally announced May 2023.
-
Bayesian radio interferometric imaging with direction-dependent calibration
Authors:
Jakob Roth,
Philipp Arras,
Martin Reinecke,
Richard A. Perley,
Rüdiger Westermann,
Torsten A. Enßlin
Abstract:
Context: Radio interferometers measure frequency components of the sky brightness, modulated by the gains of the individual radio antennas. Due to atmospheric turbulence and variations in the operational conditions of the antennas these gains fluctuate. Thereby the gains do not only depend on time but also on the spatial direction on the sky. To recover high quality radio maps an accurate reconstr…
▽ More
Context: Radio interferometers measure frequency components of the sky brightness, modulated by the gains of the individual radio antennas. Due to atmospheric turbulence and variations in the operational conditions of the antennas these gains fluctuate. Thereby the gains do not only depend on time but also on the spatial direction on the sky. To recover high quality radio maps an accurate reconstruction of the direction and time-dependent individual antenna gains is required. Aims: This paper aims to improve the reconstruction of radio images, by introducing a novel joint imaging and calibration algorithm including direction-dependent antenna gains. Methods: Building on the \texttt{resolve} framework, we designed a Bayesian imaging and calibration algorithm utilizing the image domain gridding method for numerically efficient application of direction-dependent antenna gains. Furthermore by approximating the posterior probability distribution with variational inference, our algorithm can provide reliable uncertainty maps. Results: We demonstrate the ability of the algorithm to recover high resolution high dynamic range radio maps from VLA data of the radio galaxy Cygnus A. We compare the quality of the recovered images with previous work relying on classically calibrated data. Furthermore we compare with a compressed sensing algorithm also incorporating direction-dependent gains. Conclusions: Including direction-dependent effects in the calibration model significantly improves the dynamic range of the reconstructed images compared to reconstructions from classically calibrated data. Compared to the compressed sensing reconstruction, the resulting sky images have a higher resolution and show fewer artifacts. For utilizing the full potential of radio interferometric data, it is essential to consider the direction dependence of the antenna gains.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Improved cosmic microwave background (de-)lensing using general spherical harmonic transforms
Authors:
Martin Reinecke,
Sebastian Belkner,
Julien Carron
Abstract:
Deep cosmic microwave background polarization experiments allow a very precise internal reconstruction of the gravitational lensing signal in pricinple. For this aim, likelihood-based or Bayesian methods are typically necessary, where very large numbers of lensing and delensing remap**s on the sphere are sometimes required before satisfactory convergence. We discuss here an optimized piece of nu…
▽ More
Deep cosmic microwave background polarization experiments allow a very precise internal reconstruction of the gravitational lensing signal in pricinple. For this aim, likelihood-based or Bayesian methods are typically necessary, where very large numbers of lensing and delensing remap**s on the sphere are sometimes required before satisfactory convergence. We discuss here an optimized piece of numerical code in some detail that is able to efficiently perform both the lensing operation and its adjoint (closely related to delensing) to arbitrary accuracy, using nonuniform fast Fourier transform technology. Where applicable, we find that the code outperforms current widespread software by a very wide margin. It is able to produce high-resolution maps that are accurate enough for next-generation cosmic microwave background experiments on the timescale of seconds on a modern laptop. The adjoint operation performs similarly well and removes the need for the computation of inverse deflection fields. This publicly available code enables de facto efficient spherical harmonic transforms on completely arbitrary grids, and it might be applied in other areas as well.
△ Less
Submitted 9 August, 2023; v1 submitted 20 April, 2023;
originally announced April 2023.
-
Cosmology inference at the field level from biased tracers in redshift-space
Authors:
Julia Stadler,
Fabian Schmidt,
Martin Reinecke
Abstract:
Cosmology inference of galaxy clustering at the field level with the EFT likelihood in principle allows for extracting all non-Gaussian information from quasi-linear scales, while robustly marginalizing over any astrophysical uncertainties. A pipeline in this spirit is implemented in the \texttt{LEFTfield} code, which we extend in this work to describe the clustering of galaxies in redshift space.…
▽ More
Cosmology inference of galaxy clustering at the field level with the EFT likelihood in principle allows for extracting all non-Gaussian information from quasi-linear scales, while robustly marginalizing over any astrophysical uncertainties. A pipeline in this spirit is implemented in the \texttt{LEFTfield} code, which we extend in this work to describe the clustering of galaxies in redshift space. Our main additions are: the computation of the velocity field in the LPT gravity model, the fully nonlinear displacement of the evolved, biased density field to redshift space, and a systematic expansion of velocity bias. We test the resulting analysis pipeline by applying it to synthetic data sets with a known ground truth at increasing complexity: mock data generated from the perturbative forward model itself, sub-sampled matter particles, and dark matter halos in N-body simulations. By fixing the initial-time density contrast to the ground truth, while varying the growth rate $f$, bias coefficients and noise amplitudes, we perform a stringent set of checks. These show that indeed a systematic higher-order expansion of the velocity bias is required to infer a growth rate consistent with the ground truth within errors. Applied to dark matter halos, our analysis yields unbiased constraints on $f$ at the level of a few percent for a variety of halo masses at redshifts $z=0,\,0.5,\,1$ and for a broad range of cutoff scales $0.08\,h/\mathrm{Mpc} \leq Λ\leq 0.20\,h/\mathrm{Mpc}$. Importantly, deviations between true and inferred growth rate exhibit the scaling with halo mass, redshift and cutoff that one expects based on the EFT of Large Scale Structure. Further, we obtain a robust detection of velocity bias through its effect on the redshift-space density field and are able to disentangle it from higher-derivative bias contributions.
△ Less
Submitted 30 October, 2023; v1 submitted 17 March, 2023;
originally announced March 2023.
-
Consistency tests of field level inference with the EFT likelihood
Authors:
Andrija Kostić,
Nhat-Minh Nguyen,
Fabian Schmidt,
Martin Reinecke
Abstract:
Analyzing the clustering of galaxies at the field level in principle promises access to all the cosmological information available. Given this incentive, in this paper we investigate the performance of field-based forward modeling approach to galaxy clustering using the effective field theory (EFT) framework of large-scale structure (LSS). We do so by applying this formalism to a set of consistenc…
▽ More
Analyzing the clustering of galaxies at the field level in principle promises access to all the cosmological information available. Given this incentive, in this paper we investigate the performance of field-based forward modeling approach to galaxy clustering using the effective field theory (EFT) framework of large-scale structure (LSS). We do so by applying this formalism to a set of consistency and convergence tests on synthetic datasets. We explore the high-dimensional joint posterior of LSS initial conditions by combining Hamiltonian Monte Carlo sampling for the field of initial conditions, and slice sampling for cosmology and model parameters. We adopt the Lagrangian perturbation theory forward model from [1], up to second order, for the forward model of biased tracers. We specifically include model mis-specifications in our synthetic datasets within the EFT framework. We achieve this by generating synthetic data at a higher cutoff scale $Λ_0$, which controls which Fourier modes enter the EFT likelihood evaluation, than the cutoff $Λ$ used in the inference. In the presence of model mis-specifications, we find that the EFT framework still allows for robust, unbiased joint inference of a) cosmological parameters - specifically, the scaling amplitude of the initial conditions - b) the initial conditions themselves, and c) the bias and noise parameters. In addition, we show that in the purely linear case, where the posterior is analytically tractable, our samplers fully explore the posterior surface. We also demonstrate convergence in the cases of nonlinear forward models. Our findings serve as a confirmation of the EFT field-based forward model framework developed in [2-7], and as another step towards field-level cosmological analyses of real galaxy surveys.
△ Less
Submitted 11 July, 2023; v1 submitted 15 December, 2022;
originally announced December 2022.
-
Impact of half-wave plate systematics on the measurement of cosmic birefringence from CMB polarization
Authors:
Marta Monelli,
Eiichiro Komatsu,
Alexandre E. Adler,
Matteo Billi,
Paolo Campeti,
Nadia Dachlythra,
Adriaan J. Duivenvoorden,
Jon E. Gudmundsson,
Martin Reinecke
Abstract:
Polarization of the cosmic microwave background (CMB) can probe new parity-violating physics such as cosmic birefringence (CB), which requires exquisite control over instrumental systematics. The non-idealities of the half-wave plate (HWP) represent a source of systematics when used as a polarization modulator. We study their impact on the CMB angular power spectra, which is partially degenerate w…
▽ More
Polarization of the cosmic microwave background (CMB) can probe new parity-violating physics such as cosmic birefringence (CB), which requires exquisite control over instrumental systematics. The non-idealities of the half-wave plate (HWP) represent a source of systematics when used as a polarization modulator. We study their impact on the CMB angular power spectra, which is partially degenerate with CB and miscalibration of the polarization angle. We use full-sky beam convolution simulations including HWP to generate mock noiseless time-ordered data, process them through a bin averaging map-maker, and calculate the power spectra including $TB$ and $EB$ correlations. We also derive analytical formulae which accurately model the observed spectra. For our choice of HWP parameters, the HWP-induced angle amounts to a few degrees, which could be misinterpreted as CB. Accurate knowledge of the HWP is required to mitigate this. Our simulation and analytical formulae will be useful for deriving requirements for the accuracy of HWP calibration.
△ Less
Submitted 21 March, 2023; v1 submitted 10 November, 2022;
originally announced November 2022.
-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
BeyondPlanck IV. On end-to-end simulations in CMB analysis -- Bayesian versus frequentist statistics
Authors:
M. Brilenkov,
K. S. F. Fornazier,
L. T. Hergt,
G. A. Hoerning,
A. Marins,
T. Murokoshi,
F. Rahman,
N. -O. Stutzer,
Y. Zhou,
F. B. Abdalla,
K. J. Andersen,
R. Aurlien,
R. Banerji,
A. Basyrov,
A. Battista,
M. Bersanelli,
S. Bertocco,
S. Bollanos,
L. P. L. Colombo,
H. K. Eriksen,
J. R. Eskilt,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta
, et al. (26 additional authors not shown)
Abstract:
End-to-end simulations play a key role in the analysis of any high-sensitivity CMB experiment, providing high-fidelity systematic error propagation capabilities unmatched by any other means. In this paper, we address an important issue regarding such simulations, namely how to define the inputs in terms of sky model and instrument parameters. These may either be taken as a constrained realization…
▽ More
End-to-end simulations play a key role in the analysis of any high-sensitivity CMB experiment, providing high-fidelity systematic error propagation capabilities unmatched by any other means. In this paper, we address an important issue regarding such simulations, namely how to define the inputs in terms of sky model and instrument parameters. These may either be taken as a constrained realization derived from the data, or as a random realization independent from the data. We refer to these as Bayesian and frequentist simulations, respectively. We show that the two options lead to significantly different correlation structures, as frequentist simulations, contrary to Bayesian simulations, effectively include cosmic variance, but exclude realization-specific correlations from non-linear degeneracies. Consequently, they quantify fundamentally different types of uncertainties, and we argue that they therefore also have different and complementary scientific uses, even if this dichotomy is not absolute. Before BeyondPlanck, most pipelines have used a mix of constrained and random inputs, and used the same hybrid simulations for all applications, even though the statistical justification for this is not always evident. BeyondPlanck represents the first end-to-end CMB simulation framework that is able to generate both types of simulations, and these new capabilities have brought this topic to the forefront. The Bayesian BeyondPlanck simulations and their uses are described extensively in a suite of companion papers. In this paper we consider one important applications of the corresponding frequentist simulations, namely code validation. That is, we generate a set of 1-year LFI 30 GHz frequentist simulations with known inputs, and use these to validate the core low-level BeyondPlanck algorithms; gain estimation, correlated noise estimation, and mapmaking.
△ Less
Submitted 9 September, 2022;
originally announced September 2022.
-
BeyondPlanck X. Planck LFI frequency maps with sample-based error propagation
Authors:
A. Basyrov,
A. -S. Suur-Uski,
L. P. L. Colombo,
J. R. Eskilt,
S. Paradiso,
K. J. Andersen,
R. Aurlien,
R. Banerji,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle
, et al. (15 additional authors not shown)
Abstract:
We present Planck LFI frequency sky maps derived within the BeyondPlanck framework. This framework draws samples from a global posterior distribution that includes instrumental, astrophysical and cosmological parameters, and the main product is an entire ensemble of frequency sky map samples. This ensemble allows for computationally convenient end-to-end propagation of low-level instrumental uncer…
▽ More
We present Planck LFI frequency sky maps derived within the BeyondPlanck framework. This framework draws samples from a global posterior distribution that includes instrumental, astrophysical and cosmological parameters, and the main product is an entire ensemble of frequency sky map samples. This ensemble allows for computationally convenient end-to-end propagation of low-level instrumental uncertainties into higher-level science products. We show that the two dominant sources of LFI instrumental systematic uncertainties are correlated noise and gain fluctuations, and the products presented here support - for the first time - full Bayesian error propagation for these effects at full angular resolution. We compare our posterior mean maps with traditional frequency maps delivered by the Planck collaboration, and find generally good agreement. The most important quality improvement is due to significantly lower calibration uncertainties in the new processing, as we find a fractional absolute calibration uncertainty at 70 GHz of $δg_{0}/g_{0} =5 \cdot 10^{-5}$, which is nominally 40 times smaller than that reported by Planck 2018. However, the original Planck 2018 estimate has a non-trivial statistical interpretation, and this further illustrates the advantage of the new framework in terms of producing self-consistent and well-defined error estimates of all involved quantities without the need of ad hoc uncertainty contributions. We describe how low-resolution data products, including dense pixel-pixel covariance matrices, may be produced directly from the posterior samples without the need for computationally expensive analytic calculations or simulations. We conclude that posterior-based frequency map sampling provides unique capabilities in terms of low-level systematics modelling and error propagation, and may play an important role for future CMB B-mode experiments. (Abridged.)
△ Less
Submitted 30 August, 2022;
originally announced August 2022.
-
BeyondPlanck XI. Bayesian CMB analysis with sample-based end-to-end error propagation
Authors:
L. P. L. Colombo,
J. R. Eskilt,
S. Paradiso,
H. Thommesen,
K. J. Andersen,
R. Aurlien,
R. Banerji,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell
, et al. (14 additional authors not shown)
Abstract:
We present posterior sample-based cosmic microwave background (CMB) constraints from Planck LFI and WMAP observations derived through global end-to-end Bayesian processing. We use these samples to study correlations between CMB, foreground, and instrumental parameters, and we identify a particularly strong degeneracy between CMB temperature fluctuations and free-free emission on intermediate angul…
▽ More
We present posterior sample-based cosmic microwave background (CMB) constraints from Planck LFI and WMAP observations derived through global end-to-end Bayesian processing. We use these samples to study correlations between CMB, foreground, and instrumental parameters, and we identify a particularly strong degeneracy between CMB temperature fluctuations and free-free emission on intermediate angular scales, which is mitigated through model reduction, masking, and resampling. We compare our posterior-based CMB results with previous Planck products, and find generally good agreement, but with higher noise due to exclusion of HFI data. We find a best-fit CMB dipole amplitude of $3362.7\pm1.4μK$, in excellent agreement with previous Planck results. The quoted uncertainty is derived directly from the sampled posterior distribution, and does not involve any ad hoc contribution for systematic effects. Similarly, we find a temperature quadrupole amplitude of $σ^{TT}_2=229\pm97μK^2$, in good agreement with previous results in terms of the amplitude, but the uncertainty is an order of magnitude larger than the diagonal Fisher uncertainty. Relatedly, we find lower evidence for a possible alignment between $\ell = 2$ and $\ell = 3$ than previously reported due to a much larger scatter in the individual quadrupole coefficients, caused both by marginalizing over a more complete set of systematic effects, and by our more conservative analysis mask. For higher multipoles, we find that the angular temperature power spectrum is generally in good agreement with both Planck and WMAP. This is the first time the sample-based asymptotically exact Blackwell-Rao estimator has been successfully established for multipoles up to $\ell\le600$, and it now accounts for the majority of the cosmologically important information. Cosmological parameter constraints are presented in a companion paper. (Abriged)
△ Less
Submitted 30 August, 2022;
originally announced August 2022.
-
From BeyondPlanck to Cosmoglobe: Open Science, Reproducibility, and Data Longevity
Authors:
S. Gerakakis,
M. Brilenkov,
M. Ieronymaki,
M. San,
D. J. Watts,
K. J. Andersen,
R. Aurlien,
R. Banerji,
A. Basyrov,
M. Bersanelli,
S. Bertocco,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
J. R. Eskilt,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
H. T. Ihle
, et al. (17 additional authors not shown)
Abstract:
The BeyondPlanck and Cosmoglobe collaborations have implemented the first integrated Bayesian end-to-end analysis pipeline for CMB experiments. The primary long-term motivation for this work is to develop a common analysis platform that supports efficient global joint analysis of complementary radio, microwave, and sub-millimeter experiments. A strict prerequisite for this to succeed is broad part…
▽ More
The BeyondPlanck and Cosmoglobe collaborations have implemented the first integrated Bayesian end-to-end analysis pipeline for CMB experiments. The primary long-term motivation for this work is to develop a common analysis platform that supports efficient global joint analysis of complementary radio, microwave, and sub-millimeter experiments. A strict prerequisite for this to succeed is broad participation from the CMB community, and two foundational aspects of the program are therefore reproducibility and Open Science. In this paper, we discuss our efforts toward this aim. We also discuss measures toward facilitating easy code and data distribution, community-based code documentation, user-friendly compilation procedures, etc. This work represents the first publicly released end-to-end CMB analysis pipeline that includes raw data, source code, parameter files, and documentation. We argue that such a complete pipeline release should be a requirement for all major future and publicly-funded CMB experiments, noting that a full public release significantly increases data longevity by ensuring that the data quality can be improved whenever better processing techniques, complementary datasets, or more computing power become available, and thereby also taxpayers' value for money; providing only raw data and final products is not sufficient to guarantee full reproducibility in the future.
△ Less
Submitted 14 March, 2023; v1 submitted 20 May, 2022;
originally announced May 2022.
-
BeyondPlanck XII. Cosmological parameter constraints with end-to-end error propagation
Authors:
S. Paradiso,
L. P. L. Colombo,
K. J. Andersen,
R. Aurlien,
R. Banerji,
A. Basyrov,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
H. K. Eriksen,
J. R. Eskilt,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell
, et al. (16 additional authors not shown)
Abstract:
We present cosmological parameter constraints as estimated using the Bayesian BeyondPlanck (BP) analysis framework. This method supports seamless end-to-end error propagation from raw time-ordered data to final cosmological parameters. As a first demonstration of the method, we analyze time-ordered Planck LFI observations, combined with selected external data (WMAP 33-61GHz, Planck HFI DR4 353 and…
▽ More
We present cosmological parameter constraints as estimated using the Bayesian BeyondPlanck (BP) analysis framework. This method supports seamless end-to-end error propagation from raw time-ordered data to final cosmological parameters. As a first demonstration of the method, we analyze time-ordered Planck LFI observations, combined with selected external data (WMAP 33-61GHz, Planck HFI DR4 353 and 857GHz, and Haslam 408MHz) in the form of pixelized maps which are used to break critical astrophysical degeneracies. Overall, all results are generally in good agreement with previously reported values from Planck 2018 and WMAP, with the largest relative difference for any parameter of about 1 sigma when considering only temperature multipoles between 29<l<601. In cases where there are differences, we note that the BP results are generally slightly closer to the high-l HFI-dominated Planck 2018 results than previous analyses, suggesting slightly less tension between low and high multipoles. Using low-l polarization information from LFI and WMAP, we find a best-fit value of tau=0.066 +/- 0.013, which is higher than the low value of tau=0.051 +/- 0.006 derived from Planck 2018 and slightly lower than the value of 0.069 +/- 0.011 derived from joint analysis of official LFI and WMAP products. Most importantly, however, we find that the uncertainty derived in the BP processing is about 30% larger than when analyzing the official products, after taking into account the different sky coverage. We argue that this is due to marginalizing over a more complete model of instrumental and astrophysical parameters, and this results in both more reliable and more rigorously defined uncertainties. We find that about 2000 Monte Carlo samples are required to achieve robust convergence for low-resolution CMB covariance matrix with 225 independent modes.
△ Less
Submitted 20 May, 2022;
originally announced May 2022.
-
Multi-Component Imaging of the Fermi Gamma-ray Sky in the Spatio-spectral Domain
Authors:
Lukas I. Platz,
Jakob Knollmüller,
Philipp Arras,
Philipp Frank,
Martin Reinecke,
Dominik Jüstel,
Torsten A. Enßlin
Abstract:
We perform two distinct spatio-spectral reconstructions of the gamma-ray sky in the range of 0.56-316 GeV based on Fermi Large Area Telescope (LAT) data. Both describe the sky brightness to be composed of a diffuse-emission and a point-source component. The first model requires minimal assumptions and provides a template-free reconstruction as a reference. It makes use of spatial and spectral corr…
▽ More
We perform two distinct spatio-spectral reconstructions of the gamma-ray sky in the range of 0.56-316 GeV based on Fermi Large Area Telescope (LAT) data. Both describe the sky brightness to be composed of a diffuse-emission and a point-source component. The first model requires minimal assumptions and provides a template-free reconstruction as a reference. It makes use of spatial and spectral correlations to distinguish between the different components. The second model is physics-informed and further differentiates between diffuse emission of hadronic and leptonic origin. For this, we assume parametric, but spatially varying energy spectra to distinguish between the processes and use thermal Galactic dust observations to indicate the preferred sites of hadronic interactions. To account for instrumental effects we model the point-spread, the energy dispersion, and the exposure of the telescope throughout the observation. The reconstruction problem is formulated as a Bayesian inference task, that is solved by variational inference. We show decompositions of the Gamma-ray flux into diffuse and point-like emissions, and of the diffuse emissions into multiple physically motivated components. The diffuse decomposition provides an unprecedented view of the Galactic leptonic diffuse emission. It shows the Fermi bubbles and their spectral variations in high fidelity and other areas exhibiting strong cosmic ray electron contents, such as a thick disk in the inner Galaxy and outflow regions. Furthermore, we report a hard spectrum gamma ray arc in the northern outer bubble co-spatial with the reported X-ray arc by the eROSITA collaboration. All our spatio-spectral sky reconstructions and their uncertainty quantification are publicly available.
△ Less
Submitted 6 December, 2023; v1 submitted 20 April, 2022;
originally announced April 2022.
-
BeyondPlanck V. Minimal ADC Corrections for Planck LFI
Authors:
D. Herman,
R. A. Watson,
K. J. Andersen,
R. Aurlien,
R. Banjeri,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell,
A. Karakci,
E. Keihänen
, et al. (14 additional authors not shown)
Abstract:
We describe the correction procedure for Analog-to-Digital Converter (ADC) differential non-linearities (DNL) adopted in the Bayesian end-to-end BeyondPlanck analysis framework. This method is nearly identical to that developed for the official LFI Data Processing Center (DPC) analysis, and relies on the binned rms noise profile of each detector data stream. However, rather than building the corre…
▽ More
We describe the correction procedure for Analog-to-Digital Converter (ADC) differential non-linearities (DNL) adopted in the Bayesian end-to-end BeyondPlanck analysis framework. This method is nearly identical to that developed for the official LFI Data Processing Center (DPC) analysis, and relies on the binned rms noise profile of each detector data stream. However, rather than building the correction profile directly from the raw rms profile, we first fit a Gaussian to each significant ADC-induced rms decrement, and then derive the corresponding correction model from this smooth model. The main advange of this approach is that only samples which are significantly affected by ADC DNLs are corrected. The new corrections are only applied to data for which there is a clear detection of the non-linearities, and for which they perform at least comparably with the DPC corrections. Out of a total of 88 LFI data streams (sky and reference load for each of the 44 detectors) we apply the new minimal ADC corrections in 25 cases, and maintain the DPC corrections in 8 cases. All these correctsion are applited to 44 or 70 GHz channels, while, as in previous analyses, none of the 30 GHz ADCs show significant evidence of non-linearity. By comparing the BeyondPlanck and DPC ADC correction methods, we estimate that the residual ADC uncertainty is about two orders of magnitude below the total noise of both the 44 and 70 GHz channels, and their impact on current cosmological parameter estimation is small. However, we also show that non-idealities in the ADC corrections can generate sharp stripes in the final frequency maps, and these could be important for future joint analyses with HFI, WMAP, or other datasets. We therefore conclude that, although the existing corrections are adequate for LFI-based cosmological parameter analysis, further work on LFI ADC corrections is still warranted.
△ Less
Submitted 6 April, 2022; v1 submitted 25 March, 2022;
originally announced March 2022.
-
From BeyondPlanck to Cosmoglobe: Preliminary $\mathit{WMAP}$ $\mathit Q$-band analysis
Authors:
D. J. Watts,
M. Galloway,
H. T. Ihle,
K. J. Andersen,
R. Aurlien,
R. Banerji,
A. Basyrov,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
J. R. Eskilt,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
J. B. Jewell
, et al. (18 additional authors not shown)
Abstract:
We present the first application of the Cosmoglobe analysis framework by analyzing 9-year $\mathit{WMAP}$ time-ordered observations using similar machinery as BeyondPlanck utilizes for $\mathit{Planck}$ LFI. We analyze only the $\mathit Q$-band (41 GHz) data and report on the low-level analysis process from uncalibrated time-ordered data to calibrated maps. Most of the existing BeyondPlanck pipeli…
▽ More
We present the first application of the Cosmoglobe analysis framework by analyzing 9-year $\mathit{WMAP}$ time-ordered observations using similar machinery as BeyondPlanck utilizes for $\mathit{Planck}$ LFI. We analyze only the $\mathit Q$-band (41 GHz) data and report on the low-level analysis process from uncalibrated time-ordered data to calibrated maps. Most of the existing BeyondPlanck pipeline may be reused for $\mathit{WMAP}$ analysis with minimal changes to the existing codebase. The main modification is the implementation of the same preconditioned biconjugate gradient mapmaker used by the $\mathit{WMAP}$ team. Producing a single $\mathit{WMAP}$ $\mathit Q$1-band sample requires 22 CPU-hrs, which is slightly more than the cost of a $\mathit{Planck}$ 44 GHz sample of 17 CPU-hrs; this demonstrates that full end-to-end Bayesian processing of the $\mathit{WMAP}$ data is computationally feasible. In general, our recovered maps are very similar to the maps released by the $\mathit{WMAP}$ team, although with two notable differences. In temperature we find a $\sim2\,\mathrm{μK}$ quadrupole difference that most likely is caused by different gain modeling, while in polarization we find a distinct $2.5\,\mathrm{μK}$ signal that has been previously called poorly-measured modes by the $\mathit{WMAP}$ team. In the Cosmoglobe processing, this pattern arises from temperature-to-polarization leakage from the coupling between the CMB Solar dipole, transmission imbalance, and sidelobes. No traces of this pattern are found in either the frequency map or TOD residual map, suggesting that the current processing has succeeded in modelling these poorly measured modes within the assumed parametric model by using $\mathit{Planck}$ information to break the sky-synchronous degeneracies inherent in the $\mathit{WMAP}$ scanning strategy.
△ Less
Submitted 23 May, 2022; v1 submitted 24 February, 2022;
originally announced February 2022.
-
Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey
Authors:
LiteBIRD Collaboration,
E. Allys,
K. Arnold,
J. Aumont,
R. Aurlien,
S. Azzoni,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
N. Bartolo,
L. Bautista,
D. Beck,
S. Beckman,
M. Bersanelli,
F. Boulanger,
M. Brilenkov,
M. Bucher,
E. Calabrese,
P. Campeti,
A. Carones,
F. J. Casas,
A. Catalano,
V. Chan,
K. Cheung
, et al. (166 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects.
△ Less
Submitted 27 March, 2023; v1 submitted 6 February, 2022;
originally announced February 2022.
-
BeyondPlanck XIII. Intensity foreground sampling, degeneracies, and priors
Authors:
K. J. Andersen,
D. Herman,
R. Aurlien,
R. Banerji,
A. Basyrov,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
J. R. Eskilt,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell,
A. Karakci
, et al. (19 additional authors not shown)
Abstract:
We present the intensity foreground algorithms and model employed within the BeyondPlanck analysis framework. The BeyondPlanck analysis is aimed at integrating component separation and instrumental parameter sampling within a global framework, leading to complete end-to-end error propagation in the $Planck$ Low Frequency Instrument (LFI) data analysis. Given the scope of the BeyondPlanck analysis,…
▽ More
We present the intensity foreground algorithms and model employed within the BeyondPlanck analysis framework. The BeyondPlanck analysis is aimed at integrating component separation and instrumental parameter sampling within a global framework, leading to complete end-to-end error propagation in the $Planck$ Low Frequency Instrument (LFI) data analysis. Given the scope of the BeyondPlanck analysis, a limited set of data is included in the component separation process, leading to foreground parameter degeneracies. In order to properly constrain the Galactic foreground parameters, we improve upon the previous $\texttt{Commander}$ component separation implementation by adding a suite of algorithmic techniques. These algorithms are designed to improve the stability and computational efficiency for weakly constrained posterior distributions. These are: 1) joint foreground spectral parameter and amplitude sampling, building on ideas from Miramare; 2) component-based monopole determination; 3) joint spectral parameter and monopole sampling; and 4) application of informative spatial priors for component amplitude maps. We find that the only spectral parameter with a significant signal-to-noise ratio using the current BeyondPlanck data set is the peak frequency of the anomalous microwave emission component, for which we find $ν_{\mathrm{p}}=25.3\pm0.5$ GHz; all others must be constrained through external priors. Future works will be aimed at integrating many more data sets into this analysis, both map and time-ordered based, thereby gradually eliminating the currently observed degeneracies in a controlled manner with respect to both instrumental systematic effects and astrophysical degeneracies. When this happens, the simple LFI-oriented data model employed in the current work will need to be generalized to account for both a richer astrophysical model and additional instrumental effects.
△ Less
Submitted 1 October, 2022; v1 submitted 20 January, 2022;
originally announced January 2022.
-
BeyondPlanck XVI. Limits on Large-Scale Polarized Anomalous Microwave Emission from Planck LFI and WMAP
Authors:
D. Herman,
B. Hensley,
K. J. Andersen,
R. Aurlien,
R. Banerji,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell,
A. Karakci,
E. Keihänen,
R. Keskitalo
, et al. (13 additional authors not shown)
Abstract:
We constrain the level of polarized anomalous microwave emission (AME) on large angular scales using $\textit{Planck}$ LFI and $\textit{WMAP}$ polarization data within a Bayesian CMB analysis framework. We model synchrotron emission with a power-law spectral energy distribution, and the sum of AME and thermal dust emission through linear regression with the $\textit{Planck}$ HFI 353 GHz data. This…
▽ More
We constrain the level of polarized anomalous microwave emission (AME) on large angular scales using $\textit{Planck}$ LFI and $\textit{WMAP}$ polarization data within a Bayesian CMB analysis framework. We model synchrotron emission with a power-law spectral energy distribution, and the sum of AME and thermal dust emission through linear regression with the $\textit{Planck}$ HFI 353 GHz data. This template-based dust emission model allows us to constrain the level of polarized AME while making minimal assumptions on its frequency dependence. We neglect cosmic microwave background fluctuations, but show through simulations that these have a minor impact on the results. We find that the resulting AME polarization fraction confidence limit is sensitive to the polarized synchrotron spectral index prior, and for priors steeper than $β_{\mathrm{s}} = -3.1\pm0.1$ we find an upper limit of $p_{\mathrm{AME}}^{\rm max}\lesssim 0.6\,\%$ ($95\,\%$ confidence). In contrast, for $β_{\mathrm{s}}=-3.0\pm0.1$, we find a nominal detection of $p_{\mathrm{AME}}=2.5\pm1.0\,\%$ ($95\,\%$ confidence). These data are thus not strong enough to simultaneously and robustly constrain both polarized synchrotron emission and AME, and our main result is therefore a constraint on the AME polarization fraction explicitly as a function of $β_\mathrm{s}$. Combining the current $\textit{Planck}$ and $\textit{WMAP}$ observations with measurements from high-sensitivity low-frequency experiments such as C-BASS and QUIJOTE will be critical to improve these limits further.
△ Less
Submitted 26 April, 2022; v1 submitted 10 January, 2022;
originally announced January 2022.
-
BeyondPlanck III. Commander3
Authors:
M. Galloway,
K. J. Andersen,
R. Aurlien,
R. Banerji,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell,
A. Karakci,
E. Keihänen,
R. Keskitalo
, et al. (13 additional authors not shown)
Abstract:
We describe the computational infrastructure for end-to-end Bayesian CMB analysis implemented by the BeyondPlanck collaboration. This code is called commander3, and provides a statistically consistent framework for global analysis of CMB and microwave observations, and may be useful for a wide range of legacy, current, and future experiments. The paper has three main goals. Firstly, we provide a h…
▽ More
We describe the computational infrastructure for end-to-end Bayesian CMB analysis implemented by the BeyondPlanck collaboration. This code is called commander3, and provides a statistically consistent framework for global analysis of CMB and microwave observations, and may be useful for a wide range of legacy, current, and future experiments. The paper has three main goals. Firstly, we provide a high-level overview of the existing code base, aiming to guide readers who wish to extend and adapt the code according to their own needs, or to reimplement it from scratch in a different programming language. Secondly, we discuss some critical computational challenges that arise within any global CMB analysis framework, for instance in-memory compression of time-ordered data, FFT optimization, and parallelization and load-balancing. Thirdly, we quantify the CPU and RAM requirements for the current BeyondPlanck analysis, and find that a total of 1.5 TB of RAM is required for efficient analysis, and the total cost of a full Gibbs sample is 170 CPU-hrs, including both low-level processing and high-level component separation, which is well within the capabilities of current low-cost computing facilities. The existing code base is made publicly available under a GNU General Public Library (GPL) license.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
BeyondPlanck VIII. Efficient Sidelobe Convolution and Correction through Spin Harmonics
Authors:
M. Galloway,
M. Reinecke,
K. J. Andersen,
R. Aurlien,
R. Banerji,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell,
A. Karakci,
E. Keihänen
, et al. (13 additional authors not shown)
Abstract:
We introduce a new formulation of the Conviqt convolution algorithm in terms of spin harmonics, and apply this to the problem of sidelobe correction for BeyondPlanck, the first end-to-end Bayesian Gibbs sampling framework for CMB analysis. We compare our implementation to the previous Planck LevelS implementation, and find good agreement between the two codes in terms of accuracy, but with a speed…
▽ More
We introduce a new formulation of the Conviqt convolution algorithm in terms of spin harmonics, and apply this to the problem of sidelobe correction for BeyondPlanck, the first end-to-end Bayesian Gibbs sampling framework for CMB analysis. We compare our implementation to the previous Planck LevelS implementation, and find good agreement between the two codes in terms of accuracy, but with a speed-up reaching a factor of 3--10, depending on the frequency bandlimits, $l_{\textrm{max}}$ and $m_{\textrm{max}}$. The new algorithm is significantly simpler to implement and maintain, since all low-level calculations are handled through an external spherical harmonic transform library. We find that our mean sidelobe estimates for Planck LFI agree well with previous efforts. Additionally, we present novel sidelobe rms maps that quantify the uncertainty in the sidelobe corrections due to variations in the sky model.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
BeyondPlanck X. Bandpass and beam leakage corrections
Authors:
T. L. Svalheim,
K. J. Andersen,
R. Aurlien,
R. Banerji,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell,
A. Karakci,
E. Keihänen
, et al. (14 additional authors not shown)
Abstract:
We discuss the treatment of bandpass and beam leakage corrections in the Bayesian BeyondPlanck CMB analysis pipeline as applied to the Planck LFI measurements. As a preparatory step, we first apply three corrections to the nominal LFI bandpass profiles including removal of a known systematic effect in the ground measuring equipment at 61 GHz; smoothing of standing wave ripples; and edge regulariza…
▽ More
We discuss the treatment of bandpass and beam leakage corrections in the Bayesian BeyondPlanck CMB analysis pipeline as applied to the Planck LFI measurements. As a preparatory step, we first apply three corrections to the nominal LFI bandpass profiles including removal of a known systematic effect in the ground measuring equipment at 61 GHz; smoothing of standing wave ripples; and edge regularization. The main net impact of these modifications is an overall shift in the 70 GHz bandpass of +0.6 GHz; we argue that any analysis of LFI data products, either from Planck or BeyondPlanck, should use these new bandpasses. In addition, we fit a single free bandpass parameter for each radiometer of the form $Δ_i = Δ_0 + δ_i$, where $Δ_0$ represents an absolute frequency shift per frequency band and $δ_i$ is a relative shift per detector. The absolute correction is only fitted at 30 GHz with a full $χ^2$-based likelihood, resulting in a correction of $Δ_{30}=0.24\pm0.03\,$GHz. The relative corrections are fitted using a spurious map approach, fundamentally similar to the method pioneered by the WMAP team, but without introducing many additional degrees of freedom. All bandpass parameters are sampled using a standard Metropolis sampler within the main BeyondPlanck Gibbs chain, and bandpass uncertainties are thus propagated to all other data products in the analysis. In total, we find that our bandpass model significantly reduces leakage effects. For beam leakage corrections, we adopt the official Planck LFI beam estimates without additional degrees of freedom, and only marginalize over the underlying sky model. We note that this is the first time leakage from beam mismatch has been included for Planck LFI maps.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission
Authors:
L. Montier,
B. Mot,
P. de Bernardis,
B. Maffei,
G. Pisano,
F. Columbro,
J. E. Gudmundsson,
S. Henrot-Versillé,
L. Lamagna,
J. Montgomery,
T. Prouvé,
M. Russell,
G. Savini,
S. Stever,
K. L. Thompson,
M. Tsujimoto,
C. Tucker,
B. Westbrook,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular…
▽ More
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization
Authors:
M. Hazumi,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banjeri,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (213 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD
Authors:
Y. Sekimoto,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li…
▽ More
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
Construction and commissioning of CMS CE prototype silicon modules
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul…
▽ More
As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca…
▽ More
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.
△ Less
Submitted 8 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
BeyondPlanck XV. Polarized foreground emission between 30 and 70 GHz
Authors:
T. L. Svalheim,
K. J. Andersen,
R. Aurlien,
R. Banerji,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell,
A. Karakci,
E. Keihänen
, et al. (13 additional authors not shown)
Abstract:
We constrain polarized foreground emission between 30 and 70 GHz with the Planck Low Frequency Instrument (LFI) and WMAP data within the global Bayesian BeyondPlanck framework. We combine for the first time full-resolution Planck LFI time-ordered data with low-resolution WMAP sky maps at 33, 40 and 61 GHz. Spectral parameters are fit with a likelihood defined at the native resolution of each frequ…
▽ More
We constrain polarized foreground emission between 30 and 70 GHz with the Planck Low Frequency Instrument (LFI) and WMAP data within the global Bayesian BeyondPlanck framework. We combine for the first time full-resolution Planck LFI time-ordered data with low-resolution WMAP sky maps at 33, 40 and 61 GHz. Spectral parameters are fit with a likelihood defined at the native resolution of each frequency channel. This analysis represents the first implementation of true multi-resolution component separation applied to CMB observations for both amplitude and spectral energy distribution (SED) parameters. For synchrotron emission, we approximate the SED as a power-law in frequency and find that the low signal-to-noise ratio of the current data strongly limits the number of free parameters that may be robustly constrained. We partition the sky into four large disjoint regions (High Latitude; Galactic Spur; Galactic Plane; and Galactic Center), each associated with its own power-law index. We find that the High Latitude region is prior-dominated, while the Galactic Center region is contaminated by residual instrumental systematics. The two remaining regions appear to be signal-dominated, and for these we derive spectral indices of $β_{\mathrm s}^{\mathrm{Spur}}=-3.17\pm0.06$ and $β_{\mathrm s}^{\mathrm{Plane}}=-3.03\pm0.07$, in good agreement with previous results. For thermal dust emission we assume a modified blackbody model and we fit a single power-law index across the full sky. We find $β_{\mathrm{d}}=1.64\pm0.03$, which is slightly steeper than reported from Planck HFI data, but still statistically consistent at the 2$σ$ confidence level.
△ Less
Submitted 18 January, 2022; v1 submitted 17 November, 2020;
originally announced November 2020.
-
BeyondPlanck VII. Bayesian estimation of gain and absolute calibration for CMB experiments
Authors:
E. Gjerløw,
H. T. Ihle,
S. Galeotta,
K. J. Andersen,
R. Aurlien,
R. Banerji,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
M. Galloway,
S. Gerakakis,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
J. B. Jewell,
A. Karakci,
E. Keihänen,
R. Keskitalo
, et al. (13 additional authors not shown)
Abstract:
We present a Bayesian calibration algorithm for CMB observations as implemented within the global end-to-end BeyondPlanck (BP) framework, and apply this to the Planck Low Frequency Instrument (LFI) data. Following the most recent Planck analysis, we decompose the full time-dependent gain into a sum of three orthogonal components: One absolute calibration term, common to all detectors; one time-ind…
▽ More
We present a Bayesian calibration algorithm for CMB observations as implemented within the global end-to-end BeyondPlanck (BP) framework, and apply this to the Planck Low Frequency Instrument (LFI) data. Following the most recent Planck analysis, we decompose the full time-dependent gain into a sum of three orthogonal components: One absolute calibration term, common to all detectors; one time-independent term that can vary between detectors; and one time-dependent component that is allowed to vary between one-hour pointing periods. Each term is then sampled conditionally on all other parameters in the global signal model through Gibbs sampling. The absolute calibration is sampled using only the orbital dipole as a reference source, while the two relative gain components are sampled using the full sky signal, including the orbital and Solar CMB dipoles, CMB fluctuations, and foreground contributions. We discuss various aspects of the data that influence gain estimation, including the dipole/polarization quadrupole degeneracy and anomalous jumps in the instrumental gain. Comparing our solution to previous pipelines, we find good agreement in general, with relative deviations of -0.67% (-0.84%) for 30 GHz, 0.12% (-0.04%) for 44 GHz and -0.03% (-0.64%) for 70 GHz, compared to Planck DR4 (Planck 2018). The deviations we find are within expected error bounds, and we attribute them to differences in data usage and general approach between the pipelines. In particular, the BP calibration is performed globally, resulting in better inter-frequency consistency. Additionally, WMAP observations are used actively in the BP analysis, which breaks degeneracies in the Planck data set and results in better agreement with WMAP. Although our presentation and algorithm are currently oriented toward LFI processing, the procedure is fully generalizable to other experiments.
△ Less
Submitted 20 May, 2022; v1 submitted 16 November, 2020;
originally announced November 2020.
-
BeyondPlanck VI. Noise characterization and modelling
Authors:
H. T. Ihle,
M. Bersanelli,
C. Franceschet,
E. Gjerløw,
K. J. Andersen,
R. Aurlien,
R. Banerji,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
J. R. Eskilt,
M. K. Foss,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
J. B. Jewell,
A. Karakci,
E. Keihänen
, et al. (16 additional authors not shown)
Abstract:
We present a Bayesian method for estimating instrumental noise parameters and propagating noise uncertainties within the global BeyondPlanck Gibbs sampling framework, and apply this to Planck Low Frequency Instrument (LFI) time-ordered data. Following previous literature, we initially adopt a $1/f$ model for the noise power spectral density (PSD), but find the need for an additional lognormal comp…
▽ More
We present a Bayesian method for estimating instrumental noise parameters and propagating noise uncertainties within the global BeyondPlanck Gibbs sampling framework, and apply this to Planck Low Frequency Instrument (LFI) time-ordered data. Following previous literature, we initially adopt a $1/f$ model for the noise power spectral density (PSD), but find the need for an additional lognormal component in the noise model for the 30 and 44\,GHz bands. We implement an optimal Wiener-filter (or constrained realization) gap-filling procedure to account for masked data. We then use this procedure to both estimate the gapless correlated noise in the time-domain, $n_\mathrm{corr}$, and to sample the noise PSD parameters, $ξ^n = \{σ_0, f_\mathrm{knee}, α, A_\mathrm{p}\}$. In contrast to previous \textit{Planck} analyses, we assume piecewise stationary noise only within each pointing period (PID), not throughout the full mission, but we adopt the LFI Data Processing Center (DPC) results as priors on $α$ and $f_\mathrm{knee}$. On average, we find best-fit correlated noise parameters that are mostly consistent with previous results, with a few notable exceptions. However, a detailed inspection of the time-dependent results reveals many important findings. First and foremost, we find strong evidence for statistically significant temporal variations in all noise PSD parameters, many of which are directly correlated with satellite housekee** data. Second, while the simple $1/f$ model appears to be an excellent fit for the LFI 70 GHz channel, there is evidence for additional correlated noise not described by a $1/f$ model in the 30 and 44 GHz channels, including within the primary science frequency range of 0.1--1 Hz. (Abridged)
△ Less
Submitted 19 July, 2022; v1 submitted 12 November, 2020;
originally announced November 2020.
-
BeyondPlanck II. CMB map-making through Gibbs sampling
Authors:
E. Keihänen,
A. -S. Suur-Uski,
K. J. Andersen,
R. Aurlien,
R. Banerji,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell,
A. Karakci
, et al. (15 additional authors not shown)
Abstract:
We present a Gibbs sampling solution to the map-making problem for CMB measurements, building on existing destri** methodology. Gibbs sampling breaks the computationally heavy destri** problem into two separate steps; noise filtering and map binning. Considered as two separate steps, both are computationally much cheaper than solving the combined problem. This provides a huge performance benef…
▽ More
We present a Gibbs sampling solution to the map-making problem for CMB measurements, building on existing destri** methodology. Gibbs sampling breaks the computationally heavy destri** problem into two separate steps; noise filtering and map binning. Considered as two separate steps, both are computationally much cheaper than solving the combined problem. This provides a huge performance benefit as compared to traditional methods, and allows us for the first time to bring the destri** baseline length to a single sample. We apply the Gibbs procedure to simulated Planck 30 GHz data. We find that gaps in the time-ordered data are handled efficiently by filling them with simulated noise as part of the Gibbs process. The Gibbs procedure yields a chain of map samples, from which we may compute the posterior mean as a best-estimate map. The variation in the chain provides information on the correlated residual noise, without need to construct a full noise covariance matrix. However, if only a single maximum-likelihood frequency map estimate is required, we find that traditional conjugate gradient solvers converge much faster than a Gibbs sampler in terms of total number of iterations. The conceptual advantages of the Gibbs sampling approach lies in statistically well-defined error propagation and systematic error correction, and this methodology forms the conceptual basis for the map-making algorithm employed in the BeyondPlanck framework, which implements the first end-to-end Bayesian analysis pipeline for CMB observations.
△ Less
Submitted 11 November, 2020;
originally announced November 2020.
-
BeyondPlanck I. Global Bayesian analysis of the Planck Low Frequency Instrument data
Authors:
BeyondPlanck Collaboration,
K. J. Andersen,
R. Aurlien,
R. Banerji,
A. Basyrov,
M. Bersanelli,
S. Bertocco,
M. Brilenkov,
M. Carbone,
L. P. L. Colombo,
H. K. Eriksen,
J. R. Eskilt,
M. K. Foss,
C. Franceschet,
U. Fuskeland,
S. Galeotta,
M. Galloway,
S. Gerakakis,
E. Gjerløw,
B. Hensley,
D. Herman,
M. Iacobellis,
M. Ieronymaki,
H. T. Ihle,
J. B. Jewell
, et al. (20 additional authors not shown)
Abstract:
We describe the BeyondPlanck project in terms of motivation, methodology and main products, and provide a guide to a set of companion papers that describe each result in fuller detail. We implement a complete end-to-end Bayesian analysis framework for the Planck LFI observations. The primary product is a full joint posterior distribution $P(ω|d)$, where $ω$ represents the set of all free instrumen…
▽ More
We describe the BeyondPlanck project in terms of motivation, methodology and main products, and provide a guide to a set of companion papers that describe each result in fuller detail. We implement a complete end-to-end Bayesian analysis framework for the Planck LFI observations. The primary product is a full joint posterior distribution $P(ω|d)$, where $ω$ represents the set of all free instrumental, astrophysical, and cosmological parameters. Notable advantages of this approach are seamless end-to-end propagation of uncertainties; accurate modeling of both astrophysical and instrumental effects in the most natural basis for each uncertain quantity; optimized computational costs with little or no need for intermediate human interaction between various analysis steps; and a complete overview of the entire analysis process within one single framework. We focus in particular on low-$\ell$ CMB polarization reconstruction with Planck LFI. We identify several important new effects that have not been accounted for in previous pipelines, including gain over-smoothing and time-variable and non-$1/f$ correlated noise in the 30 and 44 GHz channels. We find that all results are consistent with the $Λ$CDM model, and we constrain the reionization optical depth to $τ=0.066\pm0.013$, with a low-resolution $χ^2$ probability-to-exceed of 32%. This uncertainty is about 30% larger than the official pipelines, arising from taking into account a more complete instrumental model. The marginal CMB Solar dipole amplitude is $3362.7\pm1.4μ\mathrm{K}$, where the error bar is derived directly from the posterior distribution without the need of any ad-hoc instrumental corrections. We are currently not aware of any significant unmodelled systematic effects remaining in the Planck LFI data, and, for the first time, the 44 GHz channel is fully exploited. (Abridged.)
△ Less
Submitted 12 September, 2022; v1 submitted 11 November, 2020;
originally announced November 2020.
-
Efficient wide-field radio interferometry response
Authors:
Philipp Arras,
Martin Reinecke,
Rüdiger Westermann,
Torsten A. Enßlin
Abstract:
Radio interferometers do not measure the sky brightness distribution directly but rather a modified Fourier transform of it. Imaging algorithms, thus, need a computational representation of the linear measurement operator and its adjoint, irrespective of the specific chosen imaging algorithm. In this paper, we present a C++ implementation of the radio interferometric measurement operator for wide-…
▽ More
Radio interferometers do not measure the sky brightness distribution directly but rather a modified Fourier transform of it. Imaging algorithms, thus, need a computational representation of the linear measurement operator and its adjoint, irrespective of the specific chosen imaging algorithm. In this paper, we present a C++ implementation of the radio interferometric measurement operator for wide-field measurements which is based on "improved $w$-stacking". It can provide high accuracy (down to $\approx 10^{-12}$), is based on a new gridding kernel which allows smaller kernel support for given accuracy, dynamically chooses kernel, kernel support and oversampling factor for maximum performance, uses piece-wise polynomial approximation for cheap evaluations of the gridding kernel, treats the visibilities in cache-friendly order, uses explicit vectorisation if available and comes with a parallelisation scheme which scales well also in the adjoint direction (which is a problem for many previous implementations). The implementation has a small memory footprint in the sense that temporary internal data structures are much smaller than the respective input and output data, allowing in-memory processing of data sets which needed to be read from disk or distributed across several compute nodes before.
△ Less
Submitted 28 January, 2021; v1 submitted 20 October, 2020;
originally announced October 2020.
-
Simulating cosmic structure formation with the GADGET-4 code
Authors:
Volker Springel,
Rüdiger Pakmor,
Oliver Zier,
Martin Reinecke
Abstract:
Numerical methods have become a powerful tool for research in astrophysics, but their utility depends critically on the availability of suitable simulation codes. This calls for continuous efforts in code development, which is necessitated also by the rapidly evolving technology underlying today's computing hardware. Here we discuss recent methodological progress in the GADGET code, which has been…
▽ More
Numerical methods have become a powerful tool for research in astrophysics, but their utility depends critically on the availability of suitable simulation codes. This calls for continuous efforts in code development, which is necessitated also by the rapidly evolving technology underlying today's computing hardware. Here we discuss recent methodological progress in the GADGET code, which has been widely applied in cosmic structure formation over the past two decades. The new version offers improvements in force accuracy, in time-step**, in adaptivity to a large dynamic range in timescales, in computational efficiency, and in parallel scalability through a special MPI/shared-memory parallelization and communication strategy, and a more-sophisticated domain decomposition algorithm. A manifestly momentum conserving fast multipole method (FMM) can be employed as an alternative to the one-sided TreePM gravity solver introduced in earlier versions. Two different flavours of smoothed particle hydrodynamics, a classic entropy-conserving formulation and a pressure-based approach, are supported for dealing with gaseous flows. The code is able to cope with very large problem sizes, thus allowing accurate predictions for cosmic structure formation in support of future precision tests of cosmology, and at the same time is well adapted to high dynamic range zoom-calculations with extreme variability of the particle number density in the simulated volume. The GADGET-4 code is publicly released to the community and contains infrastructure for on-the-fly group and substructure finding and tracking, as well as merger tree building, a simple model for radiative cooling and star formation, a high dynamic range power spectrum estimator, and an initial conditions generator based on second-order Lagrangian perturbation theory.
△ Less
Submitted 18 August, 2021; v1 submitted 7 October, 2020;
originally announced October 2020.
-
Planck intermediate results. LV. Reliability and thermal properties of high-frequency sources in the Second Planck Catalogue of Compact Sources
Authors:
Planck Collaboration,
Y. Akrami,
M. Ashdown,
J. Aumont,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
S. Basak,
K. Benabed,
J. -P. Bernard,
M. Bersanelli,
P. Bielewicz,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
C. Burigana,
E. Calabrese,
P. Carvalho,
H. C. Chiang,
B. P. Crill,
F. Cuttaia,
A. de Rosa,
G. de Zotti
, et al. (95 additional authors not shown)
Abstract:
We describe an extension of the most recent version of the Planck Catalogue of Compact Sources (PCCS2), produced using a new multi-band Bayesian Extraction and Estimation Package (BeeP). BeeP assumes that the compact sources present in PCCS2 at 857 GHz have a dust-like spectral energy distribution, which leads to emission at both lower and higher frequencies, and adjusts the parameters of the sour…
▽ More
We describe an extension of the most recent version of the Planck Catalogue of Compact Sources (PCCS2), produced using a new multi-band Bayesian Extraction and Estimation Package (BeeP). BeeP assumes that the compact sources present in PCCS2 at 857 GHz have a dust-like spectral energy distribution, which leads to emission at both lower and higher frequencies, and adjusts the parameters of the source and its SED to fit the emission observed in Planck's three highest frequency channels at 353, 545, and 857 GHz, as well as the IRIS map at 3000 GHz. In order to reduce confusion regarding diffuse cirrus emission, BeeP's data model includes a description of the background emission surrounding each source, and it adjusts the confidence in the source parameter extraction based on the statistical properties of the spatial distribution of the background emission. BeeP produces the following three new sets of parameters for each source: (a) fits to a modified blackbody (MBB) thermal emission model of the source; (b) SED-independent source flux densities at each frequency considered; and (c) fits to an MBB model of the background in which the source is embedded. BeeP also calculates, for each source, a reliability parameter, which takes into account confusion due to the surrounding cirrus. We define a high-reliability subset (BeeP/base), containing 26 083 sources (54.1 per cent of the total PCCS2 catalogue), the majority of which have no information on reliability in the PCCS2. The results of the BeeP extension of PCCS2, which are made publicly available via the PLA, will enable the study of the thermal properties of well-defined samples of compact Galactic and extra-galactic dusty sources.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.
-
Planck intermediate results. LVII. Joint Planck LFI and HFI data processing
Authors:
Planck Collaboration,
Y. Akrami,
K. J. Andersen,
M. Ashdown,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
S. Basak,
K. Benabed,
J. -P. Bernard,
M. Bersanelli,
P. Bielewicz,
J. R. Bond,
J. Borrill,
C. Burigana,
R. C. Butler,
E. Calabrese,
B. Casaponsa,
H. C. Chiang,
L. P. L. Colombo,
C. Combet,
B. P. Crill,
F. Cuttaia
, et al. (114 additional authors not shown)
Abstract:
We present the NPIPE processing pipeline, which produces calibrated frequency maps in temperature and polarization from data from the Planck Low Frequency Instrument (LFI) and High Frequency Instrument (HFI) using high-performance computers. NPIPE represents a natural evolution of previous Planck analysis efforts, and combines some of the most powerful features of the separate LFI and HFI analysis…
▽ More
We present the NPIPE processing pipeline, which produces calibrated frequency maps in temperature and polarization from data from the Planck Low Frequency Instrument (LFI) and High Frequency Instrument (HFI) using high-performance computers. NPIPE represents a natural evolution of previous Planck analysis efforts, and combines some of the most powerful features of the separate LFI and HFI analysis pipelines. The net effect of the improvements is lower levels of noise and systematics in both frequency and component maps at essentially all angular scales, as well as notably improved internal consistency between the various frequency channels. Based on the NPIPE maps, we present the first estimate of the Solar dipole determined through component separation across all nine Planck frequencies. The amplitude is ($3366.6 \pm 2.7$)$μ$K, consistent with, albeit slightly higher than, earlier estimates. From the large-scale polarization data, we derive an updated estimate of the optical depth of reionization of $τ= 0.051 \pm 0.006$, which appears robust with respect to data and sky cuts. There are 600 complete signal, noise and systematics simulations of the full-frequency and detector-set maps. As a Planck first, these simulations include full time-domain processing of the beam-convolved CMB anisotropies. The release of NPIPE maps and simulations is accompanied with a complete suite of raw and processed time-ordered data and the software, scripts, auxiliary data, and parameter files needed to improve further on the analysis and to run matching simulations.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Planck intermediate results. LVI. Detection of the CMB dipole through modulation of the thermal Sunyaev-Zeldovich effect: Eppur si muove II
Authors:
Planck Collaboration,
Y. Akrami,
M. Ashdown,
J. Aumont,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
S. Basak,
K. Benabed,
J. -P. Bernard,
M. Bersanelli,
P. Bielewicz,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
C. Burigana,
E. Calabrese,
J. -F. Cardoso,
B. Casaponsa,
H. C. Chiang,
C. Combet,
D. Contreras,
B. P. Crill
, et al. (104 additional authors not shown)
Abstract:
The largest temperature anisotropy in the cosmic microwave background (CMB) is the dipole, which has been measured with increasing accuracy for more than three decades, particularly with the Planck satellite. The simplest interpretation of the dipole is that it is due to our motion with respect to the rest frame of the CMB. Since current CMB experiments infer temperature anisotropies from angular…
▽ More
The largest temperature anisotropy in the cosmic microwave background (CMB) is the dipole, which has been measured with increasing accuracy for more than three decades, particularly with the Planck satellite. The simplest interpretation of the dipole is that it is due to our motion with respect to the rest frame of the CMB. Since current CMB experiments infer temperature anisotropies from angular intensity variations, the dipole modulates the temperature anisotropies with the same frequency dependence as the thermal Sunyaev-Zeldovich (tSZ) effect. We present the first, and significant, detection of this signal in the tSZ maps and find that it is consistent with direct measurements of the CMB dipole, as expected. The signal contributes power in the tSZ maps, which is modulated in a quadrupolar pattern, and we estimate its contribution to the tSZ bispectrum, noting that it contributes negligible noise to the bispectrum at relevant scales.
△ Less
Submitted 7 September, 2020; v1 submitted 27 March, 2020;
originally announced March 2020.
-
Variable structures in M87* from space, time and frequency resolved interferometry
Authors:
Philipp Arras,
Philipp Frank,
Philipp Haim,
Jakob Knollmüller,
Reimar Leike,
Martin Reinecke,
Torsten Enßlin
Abstract:
Observing the dynamics of compact astrophysical objects provides insights into their inner workings, thereby probing physics under extreme conditions. The immediate vicinity of an active supermassive black hole with its event horizon, photon ring, accretion disk, and relativistic jets is a perfect place to study general relativity and magneto-hydrodynamics. The observations of M87* with Very Long…
▽ More
Observing the dynamics of compact astrophysical objects provides insights into their inner workings, thereby probing physics under extreme conditions. The immediate vicinity of an active supermassive black hole with its event horizon, photon ring, accretion disk, and relativistic jets is a perfect place to study general relativity and magneto-hydrodynamics. The observations of M87* with Very Long Baseline Interferometry (VLBI) by the Event Horizon Telescope (EHT) allows to investigate its dynamical processes on time scales of days. Compared to regular radio interferometers, VLBI networks typically have fewer antennas and low signal to noise ratios (SNRs). Furthermore, the source is variable, prohibiting integration over time to improve SNR. Here, we present an imaging algorithm that copes with the data scarcity and temporal evolution, while providing uncertainty quantification. Our algorithm views the imaging task as a Bayesian inference problem of a time-varying brightness, exploits the correlation structure in time, and reconstructs a ${2+1+1}$ dimensional time-variable and spectrally resolved image at once. We apply this method to the EHT observation of M87* and validate our approach on synthetic data. The time- and frequency-resolved reconstruction of M87* confirms variable structures on the emission ring. The reconstruction indicates extended and time-variable emission structures outside the ring itself.
△ Less
Submitted 5 June, 2022; v1 submitted 12 February, 2020;
originally announced February 2020.
-
Mitigating the impact of fiber assignment on clustering measurements from deep galaxy redshift surveys
Authors:
Tomomi Sunayama,
Masahiro Takada,
Martin Reinecke,
Ryu Makiya,
Takahiro Nishimichi,
Eiichiro Komatsu,
Shun Saito,
Naoyuki Tamura,
Kiyoto Yabe
Abstract:
We examine the impact of fiber assignment on clustering measurements from fiber-fed spectroscopic galaxy surveys. We identify new effects which were absent in previous, relatively shallow galaxy surveys such as Baryon Oscillation Spectroscopic Survey . Specifically, we consider deep surveys covering a wide redshift range from z=0.6 to z=2.4, as in the Subaru Prime Focus Spectrograph survey. Such s…
▽ More
We examine the impact of fiber assignment on clustering measurements from fiber-fed spectroscopic galaxy surveys. We identify new effects which were absent in previous, relatively shallow galaxy surveys such as Baryon Oscillation Spectroscopic Survey . Specifically, we consider deep surveys covering a wide redshift range from z=0.6 to z=2.4, as in the Subaru Prime Focus Spectrograph survey. Such surveys will have more target galaxies than we can place fibers on. This leads to two effects. First, it eliminates fluctuations with wavelengths longer than the size of the field of view, as the number of observed galaxies per field is nearly fixed to the number of available fibers. We find that we can recover the long-wavelength fluctuation by weighting galaxies in each field by the number of target galaxies. Second, it makes the preferential selection of galaxies in under-dense regions. We mitigate this effect by weighting galaxies using the so-called individual inverse probability. Correcting these two effects, we recover the underlying correlation function at better than 1 percent accuracy on scales greater than 10 Mpc/h.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Planck 2018 results. V. CMB power spectra and likelihoods
Authors:
Planck Collaboration,
N. Aghanim,
Y. Akrami,
M. Ashdown,
J. Aumont,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
S. Basak,
K. Benabed,
J. -P. Bernard,
M. Bersanelli,
P. Bielewicz,
J. J. Bock,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
F. Boulanger,
M. Bucher,
C. Burigana,
R. C. Butler,
E. Calabrese,
J. -F. Cardoso
, et al. (143 additional authors not shown)
Abstract:
This paper describes the 2018 Planck CMB likelihoods, following a hybrid approach similar to the 2015 one, with different approximations at low and high multipoles, and implementing several methodological and analysis refinements. With more realistic simulations, and better correction and modelling of systematics, we can now make full use of the High Frequency Instrument polarization data. The low…
▽ More
This paper describes the 2018 Planck CMB likelihoods, following a hybrid approach similar to the 2015 one, with different approximations at low and high multipoles, and implementing several methodological and analysis refinements. With more realistic simulations, and better correction and modelling of systematics, we can now make full use of the High Frequency Instrument polarization data. The low-multipole 100x143 GHz EE cross-spectrum constrains the reionization optical-depth parameter $τ$ to better than 15% (in combination with with the other low- and high-$\ell$ likelihoods). We also update the 2015 baseline low-$\ell$ joint TEB likelihood based on the Low Frequency Instrument data, which provides a weaker $τ$ constraint. At high multipoles, a better model of the temperature-to-polarization leakage and corrections for the effective calibrations of the polarization channels (polarization efficiency or PE) allow us to fully use the polarization spectra, improving the constraints on the $Λ$CDM parameters by 20 to 30% compared to TT-only constraints. Tests on the modelling of the polarization demonstrate good consistency, with some residual modelling uncertainties, the accuracy of the PE modelling being the main limitation. Using our various tests, simulations, and comparison between different high-$\ell$ implementations, we estimate the consistency of the results to be better than the 0.5$σ$ level. Minor curiosities already present before (differences between $\ell$<800 and $\ell$>800 parameters or the preference for more smoothing of the $C_\ell$ peaks) are shown to be driven by the TT power spectrum and are not significantly modified by the inclusion of polarization. Overall, the legacy Planck CMB likelihoods provide a robust tool for constraining the cosmological model and represent a reference for future CMB observations. (Abridged)
△ Less
Submitted 15 September, 2020; v1 submitted 30 July, 2019;
originally announced July 2019.
-
Planck 2018 results. VII. Isotropy and Statistics of the CMB
Authors:
Planck Collaboration,
Y. Akrami,
M. Ashdown,
J. Aumont,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
S. Basak,
K. Benabed,
M. Bersanelli,
P. Bielewicz,
J. J. Bock,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
F. Boulanger,
M. Bucher,
C. Burigana,
R. C. Butler,
E. Calabrese,
J. -F. Cardoso,
B. Casaponsa,
H. C. Chiang
, et al. (125 additional authors not shown)
Abstract:
Analysis of the Planck 2018 data set indicates that the statistical properties of the cosmic microwave background (CMB) temperature anisotropies are in excellent agreement with previous studies using the 2013 and 2015 data releases. In particular, they are consistent with the Gaussian predictions of the $Λ$CDM cosmological model, yet also confirm the presence of several so-called "anomalies" on la…
▽ More
Analysis of the Planck 2018 data set indicates that the statistical properties of the cosmic microwave background (CMB) temperature anisotropies are in excellent agreement with previous studies using the 2013 and 2015 data releases. In particular, they are consistent with the Gaussian predictions of the $Λ$CDM cosmological model, yet also confirm the presence of several so-called "anomalies" on large angular scales. The novelty of the current study, however, lies in being a first attempt at a comprehensive analysis of the statistics of the polarization signal over all angular scales, using either maps of the Stokes parameters, $Q$ and $U$, or the $E$-mode signal derived from these using a new methodology (which we describe in an appendix). Although remarkable progress has been made in reducing the systematic effects that contaminated the 2015 polarization maps on large angular scales, it is still the case that residual systematics (and our ability to simulate them) can limit some tests of non-Gaussianity and isotropy. However, a detailed set of null tests applied to the maps indicates that these issues do not dominate the analysis on intermediate and large angular scales (i.e., $\ell \lesssim 400$). In this regime, no unambiguous detections of cosmological non-Gaussianity, or of anomalies corresponding to those seen in temperature, are claimed. Notably, the stacking of CMB polarization signals centred on the positions of temperature hot and cold spots exhibits excellent agreement with the $Λ$CDM cosmological model, and also gives a clear indication of how Planck provides state-of-the-art measurements of CMB temperature and polarization on degree scales.
△ Less
Submitted 14 September, 2020; v1 submitted 6 June, 2019;
originally announced June 2019.
-
Planck 2018 results. IX. Constraints on primordial non-Gaussianity
Authors:
Planck Collaboration,
Y. Akrami,
F. Arroja,
M. Ashdown,
J. Aumont,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
S. Basak,
K. Benabed,
J. -P. Bernard,
M. Bersanelli,
P. Bielewicz,
J. R. Bond,
J. Borrill,
F. R. Bouchet,
M. Bucher,
C. Burigana,
R. C. Butler,
E. Calabrese,
J. -F. Cardoso,
B. Casaponsa,
A. Challinor
, et al. (135 additional authors not shown)
Abstract:
We analyse the Planck full-mission cosmic microwave background (CMB) temperature and E-mode polarization maps to obtain constraints on primordial non-Gaussianity (NG). We compare estimates obtained from separable template-fitting, binned, and modal bispectrum estimators, finding consistent values for the local, equilateral, and orthogonal bispectrum amplitudes. Our combined temperature and polariz…
▽ More
We analyse the Planck full-mission cosmic microwave background (CMB) temperature and E-mode polarization maps to obtain constraints on primordial non-Gaussianity (NG). We compare estimates obtained from separable template-fitting, binned, and modal bispectrum estimators, finding consistent values for the local, equilateral, and orthogonal bispectrum amplitudes. Our combined temperature and polarization analysis produces the following results: f_NL^local = -0.9 +\- 5.1; f_NL^equil = -26 +\- 47; and f_NL^ortho = - 38 +\- 24 (68%CL, statistical). These results include the low-multipole (4 <= l < 40) polarization data, not included in our previous analysis, pass an extensive battery of tests, and are stable with respect to our 2015 measurements. Polarization bispectra display a significant improvement in robustness; they can now be used independently to set NG constraints. We consider a large number of additional cases, e.g. scale-dependent feature and resonance bispectra, isocurvature primordial NG, and parity-breaking models, where we also place tight constraints but do not detect any signal. The non-primordial lensing bispectrum is detected with an improved significance compared to 2015, excluding the null hypothesis at 3.5 sigma. We present model-independent reconstructions and analyses of the CMB bispectrum. Our final constraint on the local trispectrum shape is g_NLl^local = (-5.8 +\-6.5) x 10^4 (68%CL, statistical), while constraints for other trispectra are also determined. We constrain the parameter space of different early-Universe scenarios, including general single-field models of inflation, multi-field and axion field parity-breaking models. Our results provide a high-precision test for structure-formation scenarios, in complete agreement with the basic picture of the LambdaCDM cosmology regarding the statistics of the initial conditions (abridged).
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
Beam-deconvolved Planck LFI maps
Authors:
E. Keihänen,
V. Lindholm,
M. Lopez-Caniego,
M. Maris,
M. Reinecke,
A. -S. Suur-Uski
Abstract:
The Planck Collaboration made its final data release in 2018. In this paper we describe beam-deconvolution map products made from Planck LFI data using the artDeco deconvolution code to symmetrize the effective beam. The deconvolution results are auxiliary data products, available through the Planck Legacy Archive. Analysis of these deconvolved survey difference maps reveals signs of residual sign…
▽ More
The Planck Collaboration made its final data release in 2018. In this paper we describe beam-deconvolution map products made from Planck LFI data using the artDeco deconvolution code to symmetrize the effective beam. The deconvolution results are auxiliary data products, available through the Planck Legacy Archive. Analysis of these deconvolved survey difference maps reveals signs of residual signal in the 30-GHz and 44-GHz frequency channels. We produce low-resolution maps and corresponding noise covariance matrices (NCVMs). The NCVMs agree reasonably well with the half-ring noise estimates except for 44 GHz, where we observe an asymmetry between $EE$ and $BB$ noise spectra, possibly a sign of further unresolved systematics.
△ Less
Submitted 27 January, 2020; v1 submitted 14 May, 2019;
originally announced May 2019.