-
Observation of a drift-driven local transport regime in the island divertor of Wendelstein 7-X
Authors:
E Flom,
D M Kriete,
M Krychowiak,
N Maaziz,
V Perseo,
F Reimold,
O Schmitz,
V Winters,
F Henke,
D Gradic,
R König,
the W7-X Team
Abstract:
Measurements of the poloidal electron density and temperature distribution in the W7-X island divertor reveal the existence of two distinct scrape-off layer transport regimes. At low and intermediate densities, $T_e$ profiles across the magnetic island are hollow, with a minimum at the island O-point. Above a threshold density $\overline{n}_e \approx 5 \times 10^{19}$ m$^{-3}$, the local minimum v…
▽ More
Measurements of the poloidal electron density and temperature distribution in the W7-X island divertor reveal the existence of two distinct scrape-off layer transport regimes. At low and intermediate densities, $T_e$ profiles across the magnetic island are hollow, with a minimum at the island O-point. Above a threshold density $\overline{n}_e \approx 5 \times 10^{19}$ m$^{-3}$, the local minimum vanishes and the $T_e$ profiles become monotonic. At the lowest studied densities, the hollow $T_e$ profiles imply an electrostatic field of up to $\textbf{E}_r \sim 6$ kV/m, which can induce $\textbf{E} \times \textbf{B}$ drifts around the island, with drift velocities of up to $\sim3$ km/s. These $\textbf{E} \times \textbf{B}$ drifts result in strong convective heat transport poloidally around the island, binormal to the magnetic field, which supports the hollow radial temperature profile and hence provides a positive feedback to the electric field. Above the threshold density, these drifts strongly diminish, presumably due to increased anomalous diffusion, which causes the profile hollowness and therefore also the radial electric field to strongly diminish. This argument is supported by comparison to EMC3-EIRENE modeling and an analytical transport analyses showing that an additional, non-diffusive transport channel is required to maintain the profile hollowness up to the densities seen in experiment, and that a poloidal drift transport channel supports such hollowness only up to certain densities.
△ Less
Submitted 2 December, 2023;
originally announced December 2023.
-
Analysis of the neutral fluxes in the divertor region of Wendelstein 7-X under attached and detached conditions using EMC3-EIRENE
Authors:
Dieter Boeyaerta,
Yuhe Feng,
Heinke Frerichs,
Thierry Kremeyer,
Dirk Naujoks,
Felix Reimold,
Oliver Schmitz,
Victoria Winters,
Sergey Bozhenkov,
Joris Fellinger,
Marcin Jakubowski,
Ralf König,
Maciej Krychowiak,
Valeria Perseo,
Georg Schlisio,
Uwe Wenzel,
W7-X team
Abstract:
This paper analyzes the neutral fluxes in the divertor region of the W7-X standard configuration for different input powers, both under attached and detached conditions. The performed analysis is conducted through EMC3-EIRENE simulations. They show the importance of the horizontal divertor to generate neutrals, and resolve the neutral plugging in the divertor region. Simulations of detached cases…
▽ More
This paper analyzes the neutral fluxes in the divertor region of the W7-X standard configuration for different input powers, both under attached and detached conditions. The performed analysis is conducted through EMC3-EIRENE simulations. They show the importance of the horizontal divertor to generate neutrals, and resolve the neutral plugging in the divertor region. Simulations of detached cases show a decrease in the number of generated neutrals compared to the attached simulations, in addition to a higher fraction of the ion flux arriving on the baffles during detachment. As the ionization takes place further inside the plasma during detachment, a larger percentage of the generated neutral particles leave the divertor as neutrals. The leakage in the poloidal and toroidal direction increases, just as the fraction of collected particles at the pum** gap. The fraction of pumped particles increases with a factor two, but stays below one percent. This demonstrates that detachment with the current target geometry, although it improves the power exhaust, is not yet leading to an increased particle exhaust.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Parametrisation of target heat flux distribution and study of transport parameters for boundary modelling in W7-X
Authors:
David Bold,
Felix Reimold,
Holger Niemann,
Yu Gao,
Marcin Jakubowski,
Carsten Killer,
Victoria R. Winters,
the W7-X team
Abstract:
Modelling the scrape-off layer of a stellarator is challenging due to the complex magnetic 3D geometry. The here presented study analyses simulations of the scrape-off layer (SOL) of the stellarator Wendelstein 7-X (W7-X) using the EMC3-EIRENE code for the magnetic standard configuration. Comparing with experimental observations, the transport model is validated. Based on the experimentally observ…
▽ More
Modelling the scrape-off layer of a stellarator is challenging due to the complex magnetic 3D geometry. The here presented study analyses simulations of the scrape-off layer (SOL) of the stellarator Wendelstein 7-X (W7-X) using the EMC3-EIRENE code for the magnetic standard configuration. Comparing with experimental observations, the transport model is validated. Based on the experimentally observed strike line width, the anomalous transport coefficients, used as input to the code are determined to around $0.2\,$m$^2/$s. This is however in disagreement with upstream measurements, where such small cross-field transport leads to temperatures higher than measured experimentally.
△ Less
Submitted 22 April, 2022; v1 submitted 17 January, 2022;
originally announced January 2022.
-
Heat and particle flux detachment with stable plasma conditions in the Wendelstein 7-X stellarator fusion experiment
Authors:
Marcin Jakubowski,
Ralf König,
Oliver Schmitz,
Yuhe Feng,
Maciej Krychowiak,
Matthias Otte,
Felix Reimold,
Andreas Dinklage,
Peter Drewelow,
Florian Effenberg,
Yu Gao,
Holger Niemann,
Georg Schlisio,
Andrea Pavone,
Thomas Sunn Pedersen,
Uwe Wenzel,
Daihong Zhang,
Sebastijan Brezinsek,
Sergey Bozhenkov,
Kai Jakob Brunner,
Daniel Carralero,
Ken Hammond,
Golo Fuchert,
Jens Knauer,
Andreas Langenberg
, et al. (8 additional authors not shown)
Abstract:
Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the…
▽ More
Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the same time also particle fluxes are reduced such that material erosion can be mitigated. Sufficient neutral pressure was reached to maintain stable particle exhaust for density control in this plasma state. This regime could be maintained for up to 28 seconds with a minimum feedback control.
△ Less
Submitted 10 January, 2020; v1 submitted 7 January, 2020;
originally announced January 2020.
-
An experimental investigation on the high density transition of the Scrape-off Layer transport in ASDEX Upgrade
Authors:
D. Carralero,
G. Birkenmeier,
H. W. Müller,
P. Manz,
P. deMarne,
S. H. Müller,
F. Reimold,
U. Stroth,
M. Wischmeier,
E. Wolfrum,
the ASDEX Upgrade team
Abstract:
A multidiagnostic approach, utilizing Langmuir probes in the midplane, X-point and divertor walls, along with Lithium beam and infrared measurements is employed to evaluate the evolution of the Scrape-off Layer (SOL) of ASDEX Upgrade across the L-mode density transition leading to the formation of a density shoulder. The flattening of the SOL density profiles is linked to a regime change of filame…
▽ More
A multidiagnostic approach, utilizing Langmuir probes in the midplane, X-point and divertor walls, along with Lithium beam and infrared measurements is employed to evaluate the evolution of the Scrape-off Layer (SOL) of ASDEX Upgrade across the L-mode density transition leading to the formation of a density shoulder. The flattening of the SOL density profiles is linked to a regime change of filaments, which become faster and larger, and to a similar flattening of the $q_{\parallel}$ profile. This transition is related to the beginning of outer divertor detachment and leads to the onset of a velocity shear layer in the SOL. Experimental measurements are in good agreement with several filament models which describe the process as a transition from conduction to convection-dominated SOL perpendicular transport caused by an increase of parallel collisionality. These results could be of great relevance since both ITER and DEMO will feature detached divertors and densities largely over the transition values, and might therefore exhibit convective transport levels different to those observed typically in present-day devices.
△ Less
Submitted 14 July, 2014;
originally announced July 2014.
-
Radio-submm flares from blazars in a discontinuous jet model
Authors:
Jörg P. Rachen,
Max Häberlein,
Felix Reimold,
Thomas Krichbaum
Abstract:
We present a model in which AGN jets are described by a dense series of plasma blobs, distributed in masses and velocities. The blobs expand and collide, and ultimately form a continuous jet flow as observed on larger scales. When blobs collide, energetic electrons are produced by first order Fermi acceleration, and emit synchrotron radiation at the radio-optical frequencies with a double-broken…
▽ More
We present a model in which AGN jets are described by a dense series of plasma blobs, distributed in masses and velocities. The blobs expand and collide, and ultimately form a continuous jet flow as observed on larger scales. When blobs collide, energetic electrons are produced by first order Fermi acceleration, and emit synchrotron radiation at the radio-optical frequencies with a double-broken power law spectrum. The difference of this model to the well-known Marscher&Gear-model is, that in our model shocks are produced on a range of scales, and exist only temporarily, which causes differences in the prediction for the spectral evolution of flares. We apply our model to radio-submm data obtained for 3C454.3, and briefly discuss implications for gamma-ray production.
△ Less
Submitted 28 June, 2010;
originally announced June 2010.