-
Graphene-based thermopneumatic generator for on-board pressure supply of soft robots
Authors:
Armin Reimers,
Jannik Rank,
Erik Greve,
Morten Möller,
Sören Kaps,
Jörg Bahr,
Rainer Adelung,
Fabian Schütt
Abstract:
Various fields, including medical and human interaction robots, gain advantages from the development of bioinspired soft actuators. Many recently developed grippers are pneumatics that require external pressure supply systems, thereby limiting the autonomy of these robots. This necessitates the development of scalable and efficient on-board pressure generation systems. While conventional air compr…
▽ More
Various fields, including medical and human interaction robots, gain advantages from the development of bioinspired soft actuators. Many recently developed grippers are pneumatics that require external pressure supply systems, thereby limiting the autonomy of these robots. This necessitates the development of scalable and efficient on-board pressure generation systems. While conventional air compression systems are hard to miniaturize, thermopneumatic systems that joule-heat a transducer material to generate pressure present a promising alternative. However, the transducer materials of previously reported thermopneumatic systems demonstrate high heat capacities and limited surface area resulting in long response times and low operation frequencies. This study presents a thermopneumatic pressure generator using aerographene, a highly porous (>99.99 %) network of interconnected graphene microtubes, as lightweight and low heat capacity transducer material. An aerographene pressurizer module (AGPM) can pressurize a reservoir of 4.2 cm3 to about ~140 mbar in 50 ms. Periodic operation of the AGPM for 10 s at 0.66 Hz can further increase the pressure in the reservoir to ~360 mbar. It is demonstrated that multiple AGPMs can be operated parallelly or in series for improved performance. For example, three parallelly operated AGPMs can generate pressure pulses of ~215 mbar. Connecting AGPMs in series increases the maximum pressure achievable by the system. It is shown that three AGPMs working in series can pressurize the reservoir to ~2000 mbar in about 2.5 min. The AGPM's minimalistic design can be easily adapted to circuit boards, making the concept a promising fit for the on-board pressure supply of soft robots.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
Multifunctional, Self-Cleaning Air Filters Based on Graphene-Enhanced Ceramic Networks
Authors:
Armin Reimers,
Ala Bouhanguel,
Erik Greve,
Morten Möller,
Lena Marie Saure,
Sören Kaps,
Lasse Wegner,
Ali Shaygan Nia,
Xinliang Feng,
Fabian Schütt,
Yves Andres,
Rainer Adelung
Abstract:
Particulate air pollution is taking a huge toll on modern society, being associated with more than three million deaths per year. In addition, airborne infectious microorganism can spread dangerous diseases, further elevating the problem. A common way to mitigate the risks of airborne particles is by air filtration. However, conventional air filters usually do not provide any functionality beyond…
▽ More
Particulate air pollution is taking a huge toll on modern society, being associated with more than three million deaths per year. In addition, airborne infectious microorganism can spread dangerous diseases, further elevating the problem. A common way to mitigate the risks of airborne particles is by air filtration. However, conventional air filters usually do not provide any functionality beyond particle removal. They are unable to inactivate accumulated contaminants and therefore need periodic maintenance and replacement to remain operational and safe. This work presents a multifunctional, self-cleaning air filtration system which utilizes a novel graphene-enhanced air filter medium (GeFM). The hybrid network of the GeFM combines the passive structure-based air filtration properties of an underlying ceramic network with additional active features based on the functional properties of a graphene thin film. The GeFM is able to capture >95 % of microorganisms and particles larger than 1 $μ$m and can be repetitively Joule-heated to >300 °C for several hours without signs of degradation. Hereby, built-up organic particulate matter and microbial contaminants are effectively decomposed, regenerating the GeFM. Additionally, the GeFM provides unique options to monitor the filter's air troughput and loading status during operation. The active features of the GeFM can drastically improve filter life-time and safety, offering great potential for the development of safer and more sustainable air filtration solutions to face the future challenges of air pollution and pandemics.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Characterization of irradiated RD53A pixel modules with passive CMOS sensors
Authors:
A. Jofrehei,
M. Backhaus,
P. Baertschi,
F. Canelli,
F. Glessgen,
W. **,
B. Kilminster,
A. Macchiolo,
A. Reimers,
B. Ristic,
R. Wallny
Abstract:
We are investigating the feasibility of using CMOS foundries to fabricate silicon detectors, both for pixels and for large-area strip sensors. The availability of multi-layer routing will provide the freedom to optimize the sensor geometry and the performance, with biasing structures in poly-silicon layers and MIM-capacitors allowing for AC coupling. A prototy** production of strip test-structur…
▽ More
We are investigating the feasibility of using CMOS foundries to fabricate silicon detectors, both for pixels and for large-area strip sensors. The availability of multi-layer routing will provide the freedom to optimize the sensor geometry and the performance, with biasing structures in poly-silicon layers and MIM-capacitors allowing for AC coupling. A prototy** production of strip test-structures and RD53A compatible pixel sensors was recently completed at LFoundry in a 150$\,$nm CMOS process. This paper will focus on the characterization of irradiated and non-irradiated pixel modules, composed by a CMOS passive sensor interconnected to a RD53A chip. The sensors are designed with a pixel cell of $25\times100\,μ\mathrm{m}^2$ in case of DC coupled devices and $50\times50\,μ\mathrm{m}^2$ for the AC coupled ones. Their performance in terms of charge collection, position resolution, and hit efficiency was studied with measurements performed in the laboratory and with beam tests. The RD53A modules with LFoundry silicon sensors were irradiated to fluences up to $1.0\times10^{16}\,\frac{\mathrm{n}_\mathrm{eq}}{\mathrm{cm}^2}$.
△ Less
Submitted 21 March, 2022;
originally announced March 2022.
-
Searches for leptoquarks in scenarios of lepton flavor universality anomalies
Authors:
Arne Christoph Reimers
Abstract:
Leptoquarks with masses at the TeV scale have been proposed as possible solutions to flavor anomalies reported in the b-flavor sector. Based on data taken in proton-proton collisions at $\sqrt{s} = 13\,\mathrm{TeV}$ at the LHC, different leptoquark flavors can be probed in various final states. In this article, the results of direct searches for single and pair production of leptoquarks conducted…
▽ More
Leptoquarks with masses at the TeV scale have been proposed as possible solutions to flavor anomalies reported in the b-flavor sector. Based on data taken in proton-proton collisions at $\sqrt{s} = 13\,\mathrm{TeV}$ at the LHC, different leptoquark flavors can be probed in various final states. In this article, the results of direct searches for single and pair production of leptoquarks conducted by the ATLAS and CMS Collaborations are summarized.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Serial powering and signal integrity characterization for the TEPX detector for the Phase-2 CMS Inner Tracker
Authors:
Arne Christoph Reimers
Abstract:
The entire CMS silicon pixel detector will be replaced to operate at the High-Luminosity LHC. In this contribution, the new Tracker Endcap Pixel detector will be presented, focusing on a novel concept to provide both power and data connectivity to the modules through a disk-shaped PCB. As this part of the detector also features the longest serial powering chains in the CMS Phase-2 Inner Tracker, e…
▽ More
The entire CMS silicon pixel detector will be replaced to operate at the High-Luminosity LHC. In this contribution, the new Tracker Endcap Pixel detector will be presented, focusing on a novel concept to provide both power and data connectivity to the modules through a disk-shaped PCB. As this part of the detector also features the longest serial powering chains in the CMS Phase-2 Inner Tracker, emphasis is put on serial powering results and the characterization of the signal integrity.
△ Less
Submitted 12 November, 2021;
originally announced November 2021.
-
Searches for new heavy particles coupling to third-generation quarks at CMS
Authors:
Arne Christoph Reimers
Abstract:
Results from searches for new particles with enhanced couplings to third-generation quarks are presented. They are based on proton-proton collision data at a center-of-mass energy of 13 TeV recorded by the CMS experiment. The signatures include single and pair production of vector-like quarks and heavy resonances decaying to third-generation quarks. A wide range of final states, from multi-leptoni…
▽ More
Results from searches for new particles with enhanced couplings to third-generation quarks are presented. They are based on proton-proton collision data at a center-of-mass energy of 13 TeV recorded by the CMS experiment. The signatures include single and pair production of vector-like quarks and heavy resonances decaying to third-generation quarks. A wide range of final states, from multi-leptonic to entirely hadronic is covered. Jet substructure techniques are employed to identify highly boosted heavy standard model particles in their hadronic decay modes.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
-
Beyond the Standard Model Physics at the HL-LHC and HE-LHC
Authors:
X. Cid Vidal,
M. D'Onofrio,
P. J. Fox,
R. Torre,
K. A. Ulmer,
A. Aboubrahim,
A. Albert,
J. Alimena,
B. C. Allanach,
C. Alpigiani,
M. Altakach,
S. Amoroso,
J. K. Anders,
J. Y. Araz,
A. Arbey,
P. Azzi,
I. Babounikau,
H. Baer,
M. J. Baker,
D. Barducci,
V. Barger,
O. Baron,
L. Barranco Navarro,
M. Battaglia,
A. Bay
, et al. (272 additional authors not shown)
Abstract:
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible futu…
▽ More
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible future upgrade, the High Energy (HE) LHC, defined as $15~\mathrm{ab}^{-1}$ of data at a centre-of-mass energy of $27~\mathrm{TeV}$. We consider a large variety of new physics models, both in a simplified model fashion and in a more model-dependent one. A long list of contributions from the theory and experimental (ATLAS, CMS, LHCb) communities have been collected and merged together to give a complete, wide, and consistent view of future prospects for BSM physics at the considered colliders. On top of the usual standard candles, such as supersymmetric simplified models and resonances, considered for the evaluation of future collider potentials, this report contains results on dark matter and dark sectors, long lived particles, leptoquarks, sterile neutrinos, axion-like particles, heavy scalars, vector-like quarks, and more. Particular attention is placed, especially in the study of the HL-LHC prospects, to the detector upgrades, the assessment of the future systematic uncertainties, and new experimental techniques. The general conclusion is that the HL-LHC, on top of allowing to extend the present LHC mass and coupling reach by $20-50\%$ on most new physics scenarios, will also be able to constrain, and potentially discover, new physics that is presently unconstrained. Moreover, compared to the HL-LHC, the reach in most observables will generally more than double at the HE-LHC, which may represent a good candidate future facility for a final test of TeV-scale new physics.
△ Less
Submitted 13 August, 2019; v1 submitted 19 December, 2018;
originally announced December 2018.
-
Opportunities in Flavour Physics at the HL-LHC and HE-LHC
Authors:
A. Cerri,
V. V. Gligorov,
S. Malvezzi,
J. Martin Camalich,
J. Zupan,
S. Akar,
J. Alimena,
B. C. Allanach,
W. Altmannshofer,
L. Anderlini,
F. Archilli,
P. Azzi,
S. Banerjee,
W. Barter,
A. E. Barton,
M. Bauer,
I. Belyaev,
S. Benson,
M. Bettler,
R. Bhattacharya,
S. Bifani,
A. Birnkraut,
F. Bishara,
T. Blake,
S. Blusk
, et al. (278 additional authors not shown)
Abstract:
Motivated by the success of the flavour physics programme carried out over the last decade at the Large Hadron Collider (LHC), we characterize in detail the physics potential of its High-Luminosity and High-Energy upgrades in this domain of physics. We document the extraordinary breadth of the HL/HE-LHC programme enabled by a putative Upgrade II of the dedicated flavour physics experiment LHCb and…
▽ More
Motivated by the success of the flavour physics programme carried out over the last decade at the Large Hadron Collider (LHC), we characterize in detail the physics potential of its High-Luminosity and High-Energy upgrades in this domain of physics. We document the extraordinary breadth of the HL/HE-LHC programme enabled by a putative Upgrade II of the dedicated flavour physics experiment LHCb and the evolution of the established flavour physics role of the ATLAS and CMS general purpose experiments. We connect the dedicated flavour physics programme to studies of the top quark, Higgs boson, and direct high-$p_T$ searches for new particles and force carriers. We discuss the complementarity of their discovery potential for physics beyond the Standard Model, affirming the necessity to fully exploit the LHC's flavour physics potential throughout its upgrade eras.
△ Less
Submitted 20 February, 2019; v1 submitted 18 December, 2018;
originally announced December 2018.
-
Dynamic modeling of enzyme controlled metabolic networks using a receding time horizon
Authors:
Henning Lindhorst,
Alexandra-M. Reimers,
Steffen Waldherr
Abstract:
Microorganisms have developed complex regulatory features controlling their reaction and internal adaptation to changing environments. When modeling these organisms we usually do not have full understanding of the regulation and rely on substituting it with an optimization problem using a biologically reasonable objective function. The resulting constraint-based methods like the Flux Balance Analy…
▽ More
Microorganisms have developed complex regulatory features controlling their reaction and internal adaptation to changing environments. When modeling these organisms we usually do not have full understanding of the regulation and rely on substituting it with an optimization problem using a biologically reasonable objective function. The resulting constraint-based methods like the Flux Balance Analysis (FBA) and Resource Balance Analysis (RBA) have proven to be powerful tools to predict growth rates, by-products, and pathway usage for fixed environments. In this work, we focus on the dynamic enzyme-cost Flux Balance Analysis (deFBA), which models the environment, biomass products, and their composition dynamically and contains reaction rate constraints based on enzyme capacity. We extend the original deFBA formalism to include storage molecules and biomass-related maintenance costs. Furthermore, we present a novel usage of the receding prediction horizon as used in Model Predictive Control (MPC) in the deFBA framework, which we call the short-term deFBA (sdeFBA). This way we eliminate some mathematical artifacts arising from the formulation as an optimization problem and gain access to new applications in MPC schemes. A major contribution of this paper is also a systematic approach for choosing the prediction horizon and identifying conditions to ensure solutions grow exponentially. We showcase the effects of using the sdeFBA with different horizons through a numerical example.
△ Less
Submitted 4 April, 2018;
originally announced April 2018.
-
Evaluating the stoichiometric and energetic constraints of cyanobacterial diurnal growth
Authors:
Alexandra-M. Reimers,
Henning Knoop,
Alexander Bockmayr,
Ralf Steuer
Abstract:
Cyanobacteria are an integral part of the Earth's biogeochemical cycles and a promising resource for the synthesis of renewable bioproducts from atmospheric CO2 . Growth and metabolism of cyanobacteria are inherently tied to the diurnal rhythm of light availability. As yet, however, insight into the stoichiometric and energetic constraints of cyanobacterial diurnal growth is limited. Here, we deve…
▽ More
Cyanobacteria are an integral part of the Earth's biogeochemical cycles and a promising resource for the synthesis of renewable bioproducts from atmospheric CO2 . Growth and metabolism of cyanobacteria are inherently tied to the diurnal rhythm of light availability. As yet, however, insight into the stoichiometric and energetic constraints of cyanobacterial diurnal growth is limited. Here, we develop a computational platform to evaluate the optimality of diurnal phototrophic growth using a high-quality genome-scale metabolic reconstruction of the cyanobacterium Synechococcus elongatus PCC 7942. We formulate phototrophic growth as a self-consistent autocatalytic process and evaluate the resulting time-dependent resource allocation problem using constraint-based analysis. Based on a narrow and well defined set of parameters, our approach results in an ab initio prediction of growth properties over a full diurnal cycle. In particular, our approach allows us to study the optimality of metabolite partitioning during diurnal growth. The cyclic pattern of glycogen accumulation, an emergent property of the model, has timing characteristics that are shown to be a trade-off between conflicting cellular objectives. The approach presented here provides insight into the time-dependent resource allocation problem of phototrophic diurnal growth and may serve as a general framework to evaluate the optimality of metabolic strategies that evolved in photosynthetic organisms under diurnal conditions.
△ Less
Submitted 24 October, 2016; v1 submitted 21 October, 2016;
originally announced October 2016.
-
Polynomial time vertex enumeration of convex polytopes of bounded branch-width
Authors:
Arne C. Reimers,
Leen Stougie
Abstract:
Over the last years the vertex enumeration problem of polyhedra has seen a revival in the study of metabolic networks, which increased the demand for efficient vertex enumeration algorithms for high-dimensional polyhedra given by inequalities. It is a famous and long standing open question in polyhedral theory and computational geometry whether the vertices of a polytope (bounded polyhedron), desc…
▽ More
Over the last years the vertex enumeration problem of polyhedra has seen a revival in the study of metabolic networks, which increased the demand for efficient vertex enumeration algorithms for high-dimensional polyhedra given by inequalities. It is a famous and long standing open question in polyhedral theory and computational geometry whether the vertices of a polytope (bounded polyhedron), described by a set of linear constraints, can be enumerated in total polynomial time. In this paper we apply the concept of branch-decomposition to the vertex enumeration problem of polyhedra $P = \{x : Ax = b, x \geq 0\}$. For this purpose, we introduce the concept of $k$-module and show how it relates to the separators of the linear matroid generated by the columns of $A$. We then use this to present a total polynomial time algorithm for polytopes $P$ for which the branch-width of the linear matroid generated by $A$ is bounded by a constant $k$.
△ Less
Submitted 9 July, 2016; v1 submitted 22 April, 2014;
originally announced April 2014.
-
Study on Cosmic Ray Background Rejection with a 30 m Stand-Alone IACT using Non-parametric Multivariate Methods in a sub-100 GeV Energy Range
Authors:
A. Konopelko,
A. Chilingarian,
A. Reimers
Abstract:
During the last decade ground-based very high-energy gamma-ray astronomy achieved a remarkable advancement in the development of the observational technique for the registration and study of gamma-ray emission above 100 GeV. It is widely believed that the next step in its future development will be the construction of telescopes of substantially larger size than the currently used 10 m class tel…
▽ More
During the last decade ground-based very high-energy gamma-ray astronomy achieved a remarkable advancement in the development of the observational technique for the registration and study of gamma-ray emission above 100 GeV. It is widely believed that the next step in its future development will be the construction of telescopes of substantially larger size than the currently used 10 m class telescopes. This can drastically improve the sensitivity of the ground-based detectors for gamma rays of energy from 10 to 100 GeV. Based on Monte Carlo simulations of the response of a single stand-alone 30 m imaging atmospheric Cherenkov telescope (IACT) the maximal rejection power against background cosmic ray showers for low energy gamma-rays was investigated in great detail. An advanced Bayesian multivariate analysis has been applied to the simulated Cherenkov light images of the gamma-ray- and proton-induced air showers. The results obtained here quantitatively testify that the separation between the signal and background images degrades substantially at low energies, and consequently the maximum overall quality factor can only be about 3.1 for gamma rays in the 10-30 GeV energy range. Various selection criteria as well as optimal combinations of the standard image parameters utilized for effective image separation have been also evaluated.
△ Less
Submitted 29 November, 2006;
originally announced November 2006.