-
Dark Kinetic Heating of Exoplanets and Brown Dwarfs
Authors:
Javier F. Acevedo,
Rebecca K. Leane,
Aidan J. Reilly
Abstract:
Dark kinetic heating of neutron stars has been previously studied as a promising dark matter detection avenue. Kinetic heating occurs when dark matter is sped up to relativistic speeds in the gravitational well of high-escape velocity objects, and deposits kinetic energy after becoming captured by the object, thereby increasing its temperature. We show that dark kinetic heating can be significant…
▽ More
Dark kinetic heating of neutron stars has been previously studied as a promising dark matter detection avenue. Kinetic heating occurs when dark matter is sped up to relativistic speeds in the gravitational well of high-escape velocity objects, and deposits kinetic energy after becoming captured by the object, thereby increasing its temperature. We show that dark kinetic heating can be significant even in objects with low-escape velocities, such as exoplanets and brown dwarfs, increasing the discovery potential of such searches. This can occur if there is a long-range dark force, creating a "dark escape velocity", leading to heating rates substantially larger than those expected from neutron stars. We consequently set constraints on dark sector parameters using Wide-field Infrared Survey Explorer and JWST data on Super-Jupiter WISE 0855-0714, and map out future sensitivity to the dark matter scattering cross section below $10^{-40}~{\rm cm}^2$. We compare dark kinetic heating rates of other lower escape velocity objects such as the Earth, Sun, and white dwarfs, finding complementary kinetic heating signals are possible depending on particle physics parameters.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Quantum tensor networks algorithms for evaluation of spectral functions on quantum computers
Authors:
Michael L. Wall,
Aidan Reilly,
John S. Van Dyke,
Collin Broholm,
Paraj Titum
Abstract:
We investigate quantum algorithms derived from tensor networks to simulate the static and dynamic properties of quantum many-body systems. Using a sequentially prepared quantum circuit representation of a matrix product state (MPS) that we call a quantum tensor network (QTN), we demonstrate algorithms to prepare ground and excited states on a quantum computer and apply them to molecular nanomagnet…
▽ More
We investigate quantum algorithms derived from tensor networks to simulate the static and dynamic properties of quantum many-body systems. Using a sequentially prepared quantum circuit representation of a matrix product state (MPS) that we call a quantum tensor network (QTN), we demonstrate algorithms to prepare ground and excited states on a quantum computer and apply them to molecular nanomagnets (MNMs) as a paradigmatic example. In this setting, we develop two approaches for extracting the spectral correlation functions measured in neutron scattering experiments: (a) a generalization of the SWAP test for computing wavefunction overlaps and, (b) a generalization of the notion of matrix product operators (MPOs) to the QTN setting which generates a linear combination of unitaries. The latter method is discussed in detail for translationally invariant spin-half systems, where it is shown to reduce the qubit resource requirements compared with the SWAP method, and may be generalized to other systems. We demonstrate the versatility of our approaches by simulating spin-1/2 and spin-3/2 MNMs, with the latter being an experimentally relevant model of a Cr$^{3+}_8$ ring. Our approach has qubit requirements that are independent of the number of constituents of the many-body system and scale only logarithmically with the bond dimension of the MPS representation, making them appealing for implementation on near-term quantum hardware with mid-circuit measurement and reset.
△ Less
Submitted 11 October, 2023; v1 submitted 26 September, 2023;
originally announced September 2023.
-
Canted Antiferromagnetism in Polar MnSiN$_2$ with High Néel Temperature
Authors:
Linus Kautzsch,
Alexandru B. Georgescu,
Danilo Puggioni,
Greggory Kent,
Keith M. Taddei,
Aiden Reilly,
Ram Seshadri,
James M. Rondinelli,
Stephen D. Wilson
Abstract:
MnSiN$_2$ is a transition metal nitride with Mn and Si ions displaying an ordered distribution on the cation sites of a distorted wurtzite-derived structure. The Mn$^{2+}$ ions reside on a 3D diamond-like covalent network with strong superexchange pathways. We simulate its electronic structure and find that the N anions in MnSiN$_2$ act as $σ$- and $π$-donors, which serve to enhance the N-mediated…
▽ More
MnSiN$_2$ is a transition metal nitride with Mn and Si ions displaying an ordered distribution on the cation sites of a distorted wurtzite-derived structure. The Mn$^{2+}$ ions reside on a 3D diamond-like covalent network with strong superexchange pathways. We simulate its electronic structure and find that the N anions in MnSiN$_2$ act as $σ$- and $π$-donors, which serve to enhance the N-mediated superexchange, leading to the high Néel ordering temperature of $T_N$ = 443 K. Polycrystalline samples of MnSiN$_2$ were prepared to reexamine the magnetic structure and resolve previously reported discrepancies. An additional magnetic canting transition is observed at $T_\mathrm{cant}$ = 433 K and the precise canted ground state magnetic structure has been resolved using a combination of DFT calculations and powder neutron diffraction. The calculations favor a $G$-type antiferromagnetic spin order with lowering to $Pc^\prime$. Irreducible representation analysis of the magnetic Bragg peaks supports the lowering of the magnetic symmetry. The computed model includes a 10$^\circ$ rotation of the magnetic spins away from the crystallographic $c$-axis consistent with measured powder neutron diffraction data modeling and a small canting of 0.6$^\circ$.
△ Less
Submitted 27 October, 2023; v1 submitted 8 August, 2023;
originally announced August 2023.
-
Ultraviolet Running Constraints on Low Mass Dark Sectors
Authors:
Aidan Reilly,
Natalia Toro
Abstract:
We analyze the UV breakdown of Sub-GeV dark matter models that live in a new, dark U(1) sector. Many of these models include a scalar field, which is either the dark matter itself or a dark Higgs field that generates mass terms for the dark matter particle via spontaneous symmetry breaking. A quartic self coupling of this scalar field is generically allowed, and we show that its running is largely…
▽ More
We analyze the UV breakdown of Sub-GeV dark matter models that live in a new, dark U(1) sector. Many of these models include a scalar field, which is either the dark matter itself or a dark Higgs field that generates mass terms for the dark matter particle via spontaneous symmetry breaking. A quartic self coupling of this scalar field is generically allowed, and we show that its running is largely governed by the strength of the U(1) gauge field, $α_D$. Furthermore, it consistently has a lower Landau pole than the gauge coupling. Link fields, which couple to both the dark sector and the Standard Model (SM), connect these Landau poles to constraints on SM charged particles. Current LHC constraints on link fields are compatible with $α_D \lesssim 0.5 - 1$ for most of the mass range in most models, while smaller values, $α_D \lesssim 0.15$, are favored for Majorana DM.
△ Less
Submitted 14 November, 2023; v1 submitted 2 August, 2023;
originally announced August 2023.
-
Preservation of the High Quality Factor and Accelerating Gradient of Nb3Sn-coated Cavity During Pair Assembly
Authors:
G. Eremeev,
U. Pudasaini,
S. Cheban,
J. Fischer,
D. Forehand,
S. Posen,
A. Reilly,
R. Rimmer,
B. Tennis
Abstract:
Two CEBAF 5-cell accelerator cavities have been coated with Nb3Sn film using the vapor diffusion technique. One cavity was coated in the Jefferson Lab Nb3Sn cavity coating system, and the other in the Fermilab Nb3Sn coating system. Both cavities were measured at 4 K and 2 K in the vertical dewar test in each lab and then assembled into a cavity pair at Jefferson Lab. Previous attempts to assemble…
▽ More
Two CEBAF 5-cell accelerator cavities have been coated with Nb3Sn film using the vapor diffusion technique. One cavity was coated in the Jefferson Lab Nb3Sn cavity coating system, and the other in the Fermilab Nb3Sn coating system. Both cavities were measured at 4 K and 2 K in the vertical dewar test in each lab and then assembled into a cavity pair at Jefferson Lab. Previous attempts to assemble Nb3Sn cavities into a cavity pair degraded the superconducting properties of Nb3Sn-coated cavities. This contribution discusses the efforts to identify and mitigate the pair assembly challenges and will present the results of the vertical tests before and after pair assembly. Notably, one of the cavities reached the highest gradient above 80 mT in the vertical test after the pair assembly.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Adaptive Synthetic Characters for Military Training
Authors:
Volkan Ustun,
Rajay Kumar,
Adam Reilly,
Seyed Sajjadi,
Andrew Miller
Abstract:
Behaviors of the synthetic characters in current military simulations are limited since they are generally generated by rule-based and reactive computational models with minimal intelligence. Such computational models cannot adapt to reflect the experience of the characters, resulting in brittle intelligence for even the most effective behavior models devised via costly and labor-intensive process…
▽ More
Behaviors of the synthetic characters in current military simulations are limited since they are generally generated by rule-based and reactive computational models with minimal intelligence. Such computational models cannot adapt to reflect the experience of the characters, resulting in brittle intelligence for even the most effective behavior models devised via costly and labor-intensive processes. Observation-based behavior model adaptation that leverages machine learning and the experience of synthetic entities in combination with appropriate prior knowledge can address the issues in the existing computational behavior models to create a better training experience in military training simulations. In this paper, we introduce a framework that aims to create autonomous synthetic characters that can perform coherent sequences of believable behavior while being aware of human trainees and their needs within a training simulation. This framework brings together three mutually complementary components. The first component is a Unity-based simulation environment - Rapid Integration and Development Environment (RIDE) - supporting One World Terrain (OWT) models and capable of running and supporting machine learning experiments. The second is Shiva, a novel multi-agent reinforcement and imitation learning framework that can interface with a variety of simulation environments, and that can additionally utilize a variety of learning algorithms. The final component is the Sigma Cognitive Architecture that will augment the behavior models with symbolic and probabilistic reasoning capabilities. We have successfully created proof-of-concept behavior models leveraging this framework on realistic terrain as an essential step towards bringing machine learning into military simulations.
△ Less
Submitted 6 January, 2021;
originally announced January 2021.
-
A high precision falling-ball viscometer using a fast camera
Authors:
Neal Samuel Border,
Aiden Reilly,
Addison Miller,
Shirin Jamali,
A. K. M. Newaz
Abstract:
This paper describes a simple and inexpensive method of measuring viscosity of a Newtonian fluid using the ball drop technique and an inexpensive point and shoot ~1000 frame per second camera. We successfully measured the viscosity of glycerol and glycerol-water mixture with high precision. We used three different size copper balls of diameters 0.8 mm, 1.59 mm, and 2.38 mm to check the accuracy of…
▽ More
This paper describes a simple and inexpensive method of measuring viscosity of a Newtonian fluid using the ball drop technique and an inexpensive point and shoot ~1000 frame per second camera. We successfully measured the viscosity of glycerol and glycerol-water mixture with high precision. We used three different size copper balls of diameters 0.8 mm, 1.59 mm, and 2.38 mm to check the accuracy of the measured viscosity in different concentrations of glycerol-water mixer solutions ranging from 50% to 100% (pure glycerol). Our measurements are in excellent agreement with the measurements conducted by other standard techniques. The simple and inexpensive techniques and physics we present in this manuscript can be employed to create a simple viscosity measurement setup for learning about complex fluid mechanics even at the undergraduate laboratory and high school teaching laboratory.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Six Dimensional Streaming Algorithm for Cluster Finding in N-Body Simulations
Authors:
Aidan Reilly,
Nikita Ivkin,
Gerard Lemson,
Vladimir Braverman,
Alexander Szalay
Abstract:
Cosmological N-body simulations are crucial for understanding how the Universe evolves. Studying large-scale distributions of matter in these simulations and comparing them to observations usually involves detecting dense clusters of particles called "halos,'' which are gravitationally bound and expected to form galaxies. However, traditional cluster finders are computationally expensive and use m…
▽ More
Cosmological N-body simulations are crucial for understanding how the Universe evolves. Studying large-scale distributions of matter in these simulations and comparing them to observations usually involves detecting dense clusters of particles called "halos,'' which are gravitationally bound and expected to form galaxies. However, traditional cluster finders are computationally expensive and use massive amounts of memory. Recent work by Liu et al (Liu et al. (2015)) showed the connection between cluster detection and memory-efficient streaming algorithms and presented a halo finder based on heavy hitter algorithm. Later, Ivkin et al. (Ivkin et al. (2018)) improved the scalability of suggested streaming halo finder with efficient GPU implementation. Both works map particles' positions onto a discrete grid, and therefore lose the rest of the information, such as their velocities. Therefore, two halos travelling through each other are indistinguishable in positional space, while the velocity distribution of those halos can help to identify this process which is worth further studying. In this project we analyze data from the Millennium Simulation Project (Springel et al. (2005)) to motivate the inclusion of the velocity into streaming method we introduce. We then demonstrate a use of suggested method, which allows one to find the same halos as before, while also detecting those which were indistinguishable in prior methods.
△ Less
Submitted 24 December, 2019;
originally announced December 2019.
-
Radiation Damage and Thermal Recovery of Perovskite Superconductor Yttrium Barium Copper Oxide
Authors:
A. Khobnya,
M. E. Pek,
G. Greaves,
M. Danaie,
G. D. Brittles,
S. E. Donnelly,
F. Schoofs,
A. Reilly,
P. D. Edmondson,
S. Pedrazzini
Abstract:
High temperature superconducting materials are being considered to generate the magnetic fields required for the confinement of plasma in fusion reactors. The present study aims to assess the microstructural degradation resulting from ion implantation at room temperature under two implantation conditions in Yttrium Barium Copper Oxide (YBCO) tapes. Xray Diffraction (XRD) and high resolution charac…
▽ More
High temperature superconducting materials are being considered to generate the magnetic fields required for the confinement of plasma in fusion reactors. The present study aims to assess the microstructural degradation resulting from ion implantation at room temperature under two implantation conditions in Yttrium Barium Copper Oxide (YBCO) tapes. Xray Diffraction (XRD) and high resolution characterisation techniques including Atom Probe Tomography (APT) and Transmission Electron Microscopy (TEM) analyses were used to correlate alterations in superconducting behaviour measured using a Magnetic Properties Measurement System (MPMS) to amorphization and recovery caused by ion implantation. TEM analysis was performed to depth profile the degree of crystallinity (or lack thereof) on irradiated samples. SRIM predicted the damage depth at 900 nm below the sample surface of the 2 MeV Xe implanted sample and 450 nm beneath the surface of the 0.6 MeV Xe implanted sample. 2 MeV Xe implantation caused the superconducting temperature to decrease by 10 K and the critical current density to display a 10 fold reduction. Post irradiation heat treatments up to 600C caused recrystallisation of the irradiated layer, but also oxygen loss and alterations in grain size. The recrystallised grain orientation was random in TEM lamellae, however, bulk samples re-grew along the original crystal orientation provided that some of the original material was not amorphized (ie if they nucleated on crystalline YBCO). This is extremely promising for the thermal recovery of tokamak components.
△ Less
Submitted 10 March, 2020; v1 submitted 24 October, 2018;
originally announced October 2018.
-
Long-range correlation energy calculated from coupled atomic response functions
Authors:
Alberto Ambrosetti,
Anthony M. Reilly,
Robert A. DiStasio Jr.,
Alexandre Tkatchenko
Abstract:
An accurate determination of the electron correlation energy is essential for describing the structure, stability, and function in a wide variety of systems, ranging from gas-phase molecular assemblies to condensed matter and organic/inorganic interfaces. Even small errors in the correlation energy can have a large impact on the description of chemical and physical properties in the systems of int…
▽ More
An accurate determination of the electron correlation energy is essential for describing the structure, stability, and function in a wide variety of systems, ranging from gas-phase molecular assemblies to condensed matter and organic/inorganic interfaces. Even small errors in the correlation energy can have a large impact on the description of chemical and physical properties in the systems of interest. In this context, the development of efficient approaches for the accurate calculation of the long-range correlation energy (and hence dispersion) is the main challenge. In the last years a number of methods have been developed to augment density functional approximations via dispersion energy corrections, but most of these approaches ignore the intrinsic many-body nature of correlation effects, leading to inconsistent and sometimes even qualitatively incorrect predictions. Here we build upon the recent many-body dispersion (MBD) framework, which is intimately linked to the random-phase approximation for the correlation energy. We separate the correlation energy into short-range contributions that are modeled by semi-local functionals and long-range contributions that are calculated by map** the complex all-electron problem onto a set of atomic response functions coupled in the dipole approximation. We propose an effective range-separation of the coupling between the atomic response functions that extends the already broad applicability of the MBD method to non-metallic materials with highly anisotropic responses, such as layered nanostructures. Application to a variety of high-quality benchmark datasets illustrates the accuracy and applicability of the improved MBD approach, which offers the prospect of first-principles modeling of large structurally complex systems with an accurate description of the long-range correlation energy.
△ Less
Submitted 13 December, 2013;
originally announced December 2013.
-
Electrodynamic Response and Stability of Molecular Crystals
Authors:
Bohdan Schatschneider,
Jian-Jie Liang,
Anthony M. Reilly,
Noa Marom,
Guo-Xu Zhang,
Alexandre Tkatchenko
Abstract:
We show that electrodynamic dipolar interactions, responsible for long-range fluctuations in matter, play a significant role in the stability of molecular crystals. Density functional theory calculations with van der Waals interactions determined from a semilocal "atom-in-a-molecule" model result in a large overestimation of the dielectric constants and sublimation enthalpies for polyacene crystal…
▽ More
We show that electrodynamic dipolar interactions, responsible for long-range fluctuations in matter, play a significant role in the stability of molecular crystals. Density functional theory calculations with van der Waals interactions determined from a semilocal "atom-in-a-molecule" model result in a large overestimation of the dielectric constants and sublimation enthalpies for polyacene crystals from naphthalene to pentacene, whereas an accurate treatment of non-local electrodynamic response leads to an agreement with the measured values for both quantities. Our findings suggest that collective response effects play a substantial role not only for optical excitations, but also for cohesive properties of non-covalently bound molecular crystals.
△ Less
Submitted 7 November, 2012;
originally announced November 2012.
-
Ultrafast laser excitation of spin waves by permanent modification of the exchange bias interaction in IrMn/Co
Authors:
Keoki A. Seu,
Hailong Huang,
Anne C. Reilly
Abstract:
This paper has been withdrawn by the authors due to a critical error discovered in Figures 1, 2 and 4.
This paper has been withdrawn by the authors due to a critical error discovered in Figures 1, 2 and 4.
△ Less
Submitted 9 March, 2006; v1 submitted 4 November, 2005;
originally announced November 2005.
