-
Performance of a First Full-Size WOM-Based Liquid Scintillator Detector Cell as Prototype for the SHiP Surrounding Background Tagger
Authors:
J. Alt,
O. Bezshyyko,
M. Böhles,
A. Brignoli,
A. Conaboy,
P. Deucher,
C. Eckardt,
A. Ernst,
H. Fischer,
A. Hollnagel,
M. Jadidi,
H. Lacker,
F. Lyons,
T. Molzberger,
S. Ochoa,
V. Orlov,
A. Reghunath,
F. Rehbein,
M. Schaaf,
C. Scharf,
J. Schmidt,
M. Schumann,
A. Vagts,
M. Wurm
Abstract:
As a prototype detector for the SHiP Surrounding Background Tagger (SBT), we constructed a cell (120 cm x 80 cm x 25 cm) made from corten steel that is filled with liquid scintillator (LS) composed of linear alkylbenzene (LAB) and 2,5-diphenyloxazole (PPO). The detector is equipped with two Wavelength-shifting Optical Modules (WOMs) for light collection of the primary scintillation photons. Each W…
▽ More
As a prototype detector for the SHiP Surrounding Background Tagger (SBT), we constructed a cell (120 cm x 80 cm x 25 cm) made from corten steel that is filled with liquid scintillator (LS) composed of linear alkylbenzene (LAB) and 2,5-diphenyloxazole (PPO). The detector is equipped with two Wavelength-shifting Optical Modules (WOMs) for light collection of the primary scintillation photons. Each WOM consists of an acrylic tube that is dip-coated with a wavelength-shifting layer on its surface. Via internal total reflection, the secondary photons emitted by the molecules of the wavelength shifter are guided to a ring-shaped array of 40 silicon photomultipliers (SiPMs) coupled to the WOM for light detection. The granularity of these SiPM arrays provides an innovative method to gain spatial information on the particle crossing point. Several improvements in the detector design significantly increased the light yield with respect to earlier proof-of-principle detectors. We report on the performance of this prototype detector during an exposure to high-energy positrons at the DESY II test beam facility by measuring the collected integrated yield and the signal time-of-arrival in each of the SiPM arrays. The resulting detection efficiency and reconstructed energy deposition of the incident positrons are presented, as well as the spatial and time resolution of the detector. These results are then compared to Monte Carlo simulations.
△ Less
Submitted 27 February, 2024; v1 submitted 13 November, 2023;
originally announced November 2023.
-
First measurement of the surface tension of a liquid scintillator based on Linear Alkylbenzene (HYBLENE 113)
Authors:
SHiP SBT collaboration,
J. Alt,
J. Arutinov,
O. Bezshyyko,
T. Bretz,
A. Brignoli,
A. Conaboy,
P. Deucher,
F. De Paola,
G. del Giudice,
C. di Cristo,
O. Fecarotta,
A. Fiorillo,
H. Fischer,
H. Glückler,
C. Grewing,
A. Hollnagel,
H. Lacker,
A. Miano,
G. Natour,
V. Orlov,
A. Prota,
F. Rehbein,
A. Reghunath,
A. Salzano
, et al. (7 additional authors not shown)
Abstract:
We measured the surface tension of linear alkylbenzene (LAB) HYBLENE 113 mixed with Diphenyloxazole (PPO) as well as of pure LAB HYBLENE 113 as part of material studies for the liquid-scintillator based surround background tagger (SBT) in the proposed SHiP experiment. The measurement was performed using the iron wire method and the surface tension for linear alkyl benzene HYBLENE 113 plus PPO was…
▽ More
We measured the surface tension of linear alkylbenzene (LAB) HYBLENE 113 mixed with Diphenyloxazole (PPO) as well as of pure LAB HYBLENE 113 as part of material studies for the liquid-scintillator based surround background tagger (SBT) in the proposed SHiP experiment. The measurement was performed using the iron wire method and the surface tension for linear alkyl benzene HYBLENE 113 plus PPO was found to be $(30.0\pm0.6)$ mN/m $22.0\pm 0.5$ °C and for pure HYBLENE 113, $(29.2\pm 0.6)$ mN/m at $21.0\pm 0.5$ °C.
△ Less
Submitted 4 April, 2022; v1 submitted 27 January, 2022;
originally announced January 2022.
-
Hybrid cosmic ray measurements using the IceAct telescopes in coincidence with the IceCube and IceTop detectors
Authors:
Larissa Paul,
Matthias Plum,
Merlin Schaufel,
Thomas Bretz,
Giang Do,
John W. Hewitt,
Frank Maslowski,
Florian Rehbein,
Johannes Schäfer,
Adrian Zink
Abstract:
IceAct is a proposed surface array of compact (50 cm diameter) and cost-effective Imaging Air Cherenkov Telescopes installed at the site of the IceCube Neutrino Observatory at the geographic South Pole. Since January 2019, two IceAct telescope demonstrators, featuring 61 silicon pho- tomultiplier (SiPM) pixels have been taking data in the center of the IceTop surface array during the austral winte…
▽ More
IceAct is a proposed surface array of compact (50 cm diameter) and cost-effective Imaging Air Cherenkov Telescopes installed at the site of the IceCube Neutrino Observatory at the geographic South Pole. Since January 2019, two IceAct telescope demonstrators, featuring 61 silicon pho- tomultiplier (SiPM) pixels have been taking data in the center of the IceTop surface array during the austral winter. We present the first analysis of hybrid cosmic ray events detected by the IceAct imaging air-Cherenkov telescopes in coincidence with the IceCube Neutrino Observatory, includ- ing the IceTop surface array and the IceCube in-ice array. By featuring an energy threshold of about 10 TeV and a wide field-of-view, the IceAct telescopes show promising capabilities of im- proving current cosmic ray composition studies: measuring the Cherenkov light emissions in the atmosphere adds new information about the shower development not accessible with the current detectors, enabling significantly better primary particle type discrimination on a statistical basis. The hybrid measurement also allows for detailed feasibility studies of detector cross-calibration and of cosmic ray veto capabilities for neutrino analyses. We present the performance of the telescopes, the results from the analysis of two years of data, and an outlook of a hybrid simulation for a future telescope array.
△ Less
Submitted 12 August, 2021;
originally announced August 2021.
-
Calibration of 122 SensL MicroFJ-60035 SiPMs and the reduction of optical crosstalk due to coupled light guides
Authors:
F. Rehbein,
T. Bretz,
R. Alfaro,
J. Audehm,
A. Biland,
G. Do,
M. M. González,
Y. F. Pérez-Araujo,
M. Schaufel,
J. Serna-Franco,
I. Torres
Abstract:
The excellent production quality of recent generations of Silicon Photomultipliers (SiPMs) allows for operation without individual calibration of the breakdown voltage. Measurements of the crosstalk probability and the relative gain of 122 SiPMs of type SensL MicroFJ-60035-TSV are presented. Semi-conductor photo sensors have replaced photo multiplier tubes in numerous applications featuring single…
▽ More
The excellent production quality of recent generations of Silicon Photomultipliers (SiPMs) allows for operation without individual calibration of the breakdown voltage. Measurements of the crosstalk probability and the relative gain of 122 SiPMs of type SensL MicroFJ-60035-TSV are presented. Semi-conductor photo sensors have replaced photo multiplier tubes in numerous applications featuring single-photon resolution, insensitivity to magnetic fields, higher robustness and enhanced photo detection efficiency at lower operation voltage and lower costs. Light guides are used to increase the comparably small photo sensitive area of SiPMs. Their optical coupling changes the surface conditions of the sensor and influences the probability for crosstalk photons to leave the sensor without inducing secondary breakdowns. This study compares properties of sensors that are optically coupled to light guides with bare sensors, operated at nominal bias voltage. It demonstrates, that the optical coupling to a light guide significantly reduces the crosstalk probability of the measured sensors.
△ Less
Submitted 1 October, 2021; v1 submitted 5 July, 2020;
originally announced July 2020.