-
Experimental determination of superexchange energy from two-hole spectra
Authors:
Giorgio Levy,
Maayan Yaari,
Tom Z. Regier,
Amit Keren
Abstract:
We follow the evolution of Copper and Oxygen two-hole excitations, in optimally doped (Ca$_{x}$La$_{1-x}$)(Ba$_{1.75-x}$La$_{0.25+x} $)Cu$_{3}$O$_{y}$ for $x=0.1$ and $x=0.4$. The spectra have contributions from band states as well as a localized multiplet structure. From their identification, we determine the intrashell Coulomb interaction $U$ for Oxygen and Copper sites. These results allow us t…
▽ More
We follow the evolution of Copper and Oxygen two-hole excitations, in optimally doped (Ca$_{x}$La$_{1-x}$)(Ba$_{1.75-x}$La$_{0.25+x} $)Cu$_{3}$O$_{y}$ for $x=0.1$ and $x=0.4$. The spectra have contributions from band states as well as a localized multiplet structure. From their identification, we determine the intrashell Coulomb interaction $U$ for Oxygen and Copper sites. These results allow us to estimate the atomic superexchange coupling $J$ suggesting a positive correlation between the maximal superconducting critical temperature $T_\text{C}^{max}$ and $J$.
△ Less
Submitted 19 July, 2021;
originally announced July 2021.
-
Evidence for bond-disproportionation in LiNiO2 from x-ray absorption spectroscopy
Authors:
R. J. Green,
H. Wadati,
T. Z. Regier,
A. J. Achkar,
C. McMahon,
J. P. Clancy,
H. A. Dabkowska,
B. D. Gaulin,
G. A. Sawatzky,
D. G. Hawthorn
Abstract:
The electronic structure of LiNiO$_2$, a promising Li-ion battery cathode material, has remained a challenge to understand due to its highly covalent yet correlated nature. Here we elucidate the electronic structure in LiNiO$_2$ and the related compound NaNiO$_2$ using x-ray absorption spectra (XAS) and quantum many-body calculations. Notably, we use inverse partial fluorescence yield to correctly…
▽ More
The electronic structure of LiNiO$_2$, a promising Li-ion battery cathode material, has remained a challenge to understand due to its highly covalent yet correlated nature. Here we elucidate the electronic structure in LiNiO$_2$ and the related compound NaNiO$_2$ using x-ray absorption spectra (XAS) and quantum many-body calculations. Notably, we use inverse partial fluorescence yield to correctly measure the Ni $L$-edge XAS, which is inaccurate using conventional methods. We show that the XAS are indicative of a strong Jahn-Teller effect in NaNiO$_2$ and a bond disproportionated state in LiNiO$_2$, supporting a theory of a high-entropy, glassy disproportionated state that stabilizes charging cycles in LiNiO$_2$.
△ Less
Submitted 12 November, 2020;
originally announced November 2020.
-
Adjacent Fe-Vacancy Interactions as the Origin of Room Temperature Ferromagnetism in (In$_{1-x}$Fe$_x$)$_2$O$_3$
Authors:
R. J. Green,
T. Z. Regier,
B. Leedahl,
J. A. McLeod,
X. H. Xu,
G. S. Chang,
E. Z. Kurmaev,
A. Moewes
Abstract:
Dilute magnetic semiconductors (DMSs) show great promise for applications in spin-based electronics, but in most cases continue to elude explanations of their magnetic behavior. Here, we combine quantitative x-ray spectroscopy and Anderson impurity model calculations to study ferromagnetic Fe-substituted In$_2$O$_3$ films, and we identify a subset of Fe atoms adjacent to oxygen vacancies in the cr…
▽ More
Dilute magnetic semiconductors (DMSs) show great promise for applications in spin-based electronics, but in most cases continue to elude explanations of their magnetic behavior. Here, we combine quantitative x-ray spectroscopy and Anderson impurity model calculations to study ferromagnetic Fe-substituted In$_2$O$_3$ films, and we identify a subset of Fe atoms adjacent to oxygen vacancies in the crystal lattice which are responsible for the observed room temperature ferromagnetism. Using resonant inelastic x-ray scattering, we map out the near gap electronic structure and provide further support for this conclusion. Serving as a concrete verification of recent theoretical results and indirect experimental evidence, these results solidify the role of impurity-vacancy coupling in oxide-based DMSs.
△ Less
Submitted 16 October, 2015;
originally announced October 2015.
-
Effect of Pt substitution on the electronic structure of AuTe2
Authors:
D. Ootsuki,
K. Takubo,
K. Kudo,
H. Ishii,
M. Nohara,
N. L. Saini,
R. Sutarto,
F. He,
T. Z. Regier,
M. Zonno,
M. Schneider,
G. Levy,
G. A. Sawatzky,
A. Damascelli,
T. Mizokawa
Abstract:
We report a photoemission and x-ray absorption study on Au1-xPtxTe2 (x = 0 and 0.35) triangular lattice in which superconductivity is induced by Pt substitution for Au. Au 4f and Te 3d core-level spectra of AuTe2 suggests a valence state of Au2+(Te2)2-, which is consistent with its distorted crystal structure with Te-Te dimers and compressed AuTe6 otahedra. On the other hand, valence-band photoemi…
▽ More
We report a photoemission and x-ray absorption study on Au1-xPtxTe2 (x = 0 and 0.35) triangular lattice in which superconductivity is induced by Pt substitution for Au. Au 4f and Te 3d core-level spectra of AuTe2 suggests a valence state of Au2+(Te2)2-, which is consistent with its distorted crystal structure with Te-Te dimers and compressed AuTe6 otahedra. On the other hand, valence-band photoemission spectra and pre-edge peaks of Te 3d absorption edge indicate that Au 5d bands are almost fully occupied and that Te 5p holes govern the transport properties and the lattice distortion. The two apparently conflicting pictures can be reconciled by strong Au 5d/Au 6s-Te 5p hybridization. Absence of a core-level energy shift with Pt substitution is inconsistent with the simple rigid band picture for hole do**. The Au 4f core-level spectrum gets slightly narrow with Pt substitution, indicating that the small Au 5d charge modulation in distorted AuTe2 is partially suppressed.
△ Less
Submitted 11 October, 2014;
originally announced October 2014.
-
Utility of the inverse partial fluorescence for electronic structure studies of battery materials
Authors:
H. Wadati,
A. J. Achkar,
D. G. Hawthorn,
T. Z. Regier,
M. P. Singh,
K. D. Truong,
P. Fournier,
G. Chen,
T. Mizokawa,
G. A. Sawatzky
Abstract:
X-ray absorption spectroscopy (XAS) is one of the most widely used experimental techniques to study the electronic and spatial structure of materials. Fluorescence yield mode is bulk-sensitive, but has several serious problems coming from saturation effects. In this study, we show the usefulness of partial fluorescence yields in addressing these problems. We discuss the different behaviors of La2N…
▽ More
X-ray absorption spectroscopy (XAS) is one of the most widely used experimental techniques to study the electronic and spatial structure of materials. Fluorescence yield mode is bulk-sensitive, but has several serious problems coming from saturation effects. In this study, we show the usefulness of partial fluorescence yields in addressing these problems. We discuss the different behaviors of La2NiMnO6 and LiMnO2 at the Mn 2p absorption edges. The total fluorescence yield produces misleading spectra for LiMnO2 due to the absence of high-Z (Z: atomic number) elements. We conclude that the measurement of the inverse partial fluorescence yield is essential in studies of LiMnO2, which is a hotly debated Li-ion battery material.
△ Less
Submitted 4 January, 2012;
originally announced January 2012.
-
Determination of total x-ray absorption coefficient using non-resonant x-ray emission
Authors:
A. J. Achkar,
T. Z. Regier,
E. J. Monkman,
K. M. Shen,
D. G. Hawthorn
Abstract:
An alternative measure of x-ray absorption spectroscopy (XAS) called inverse partial fluorescence yield (IPFY) has recently been developed that is both bulk sensitive and free of saturation effects. Here we show that the angle dependence of IPFY can provide a measure directly proportional to the total x-ray absorption coefficient, $μ(E)$. In contrast, fluorescence yield (FY) and electron yield (EY…
▽ More
An alternative measure of x-ray absorption spectroscopy (XAS) called inverse partial fluorescence yield (IPFY) has recently been developed that is both bulk sensitive and free of saturation effects. Here we show that the angle dependence of IPFY can provide a measure directly proportional to the total x-ray absorption coefficient, $μ(E)$. In contrast, fluorescence yield (FY) and electron yield (EY) spectra are offset and/or distorted from $μ(E)$ by an unknown and difficult to measure amount. Moreover, our measurement can determine $μ(E)$ in absolute units with no free parameters by scaling to $μ(E)$ at the non-resonant emission energy. We demonstrate this technique with measurements on NiO and NdGaO$_3$. Determining $μ(E)$ across edge-steps enables the use of XAS as a non-destructive measure of material composition. In NdGaO$_3$, we also demonstrate the utility of IPFY for insulating samples, where neither EY or FY provide reliable spectra due to sample charging and self-absorption effects, respectively.
△ Less
Submitted 5 January, 2012; v1 submitted 1 April, 2011;
originally announced April 2011.
-
Magnetic Frustration in a Mn Honeycomb Lattice Induced by Mn-O-O-Mn Pathways
Authors:
H. Wadati,
K. Kato,
Y. Wakisaka,
T. Sudayama,
D. G. Hawthorn,
T. Z. Regier,
N. Onishi,
M. Azuma,
Y. Shimakawa,
T. Mizokawa,
A. Tanaka,
G. A. Sawatzky
Abstract:
We investigated the electronic structure of layered Mn oxide Bi3Mn4O12(NO3) with a Mn honeycomb lattice by x-ray absorption spectroscopy. The valence of Mn was determined to be 4+ with a small charge-transfer energy. We estimated the values of superexchange interactions up to the fourth nearest neighbors (J1, J2, J3, and J4) by unrestricted Hartree-Fock calculations and a perturbation method. We f…
▽ More
We investigated the electronic structure of layered Mn oxide Bi3Mn4O12(NO3) with a Mn honeycomb lattice by x-ray absorption spectroscopy. The valence of Mn was determined to be 4+ with a small charge-transfer energy. We estimated the values of superexchange interactions up to the fourth nearest neighbors (J1, J2, J3, and J4) by unrestricted Hartree-Fock calculations and a perturbation method. We found that the absolute values of J1 through J4 are similar with positive (antiferromagnetic) J1 and J4, and negative (ferromagnetic) J2 and J3, due to Mn-O-O-Mn pathways activated by the smallness of charge-transfer energy. The negative J3 provides magnetic frustration in the honeycomb lattice to prevent long-range ordering.
△ Less
Submitted 14 January, 2011;
originally announced January 2011.
-
Valence evaluation of LiMnO2 and related battery materials by x-ray absorption spectroscopy
Authors:
H. Wadati,
D. G. Hawthorn,
T. Z. Regier,
G. Chen,
T. Hitosugi,
T. Mizokawa,
A. Tanaka,
G. A. Sawatzky
Abstract:
We present an x-ray absorption study of the oxidation states of transition-metal-ions of LiMnO2 and its related materials, widely used as cathodes in Li-ion batteries. The comparison between the obtained spectrum and the configuration-interaction cluster-model calculations showed that the Mn3+ in LiMnO2 is a mixture of the high-spin and low-spin states. We found that Li deficiencies occur in the c…
▽ More
We present an x-ray absorption study of the oxidation states of transition-metal-ions of LiMnO2 and its related materials, widely used as cathodes in Li-ion batteries. The comparison between the obtained spectrum and the configuration-interaction cluster-model calculations showed that the Mn3+ in LiMnO2 is a mixture of the high-spin and low-spin states. We found that Li deficiencies occur in the case of Cr substitution, whereas there are no Li deficiencies in the case of Ni substitution. We conclude that the substitution of charge-transfer-type Ni or Cu is effective for LiMnO2 battery materials.
△ Less
Submitted 1 April, 2010;
originally announced April 2010.
-
Bulk sensitive x-ray absorption spectroscopy free of self-absorption effects
Authors:
A. J. Achkar,
T. Z. Regier,
H. Wadati,
Y. -J. Kim,
H. Zhang,
D. G. Hawthorn
Abstract:
We demonstrate a new method of x-ray absorption spectroscopy (XAS) that is bulk sensitive, like traditional fluorescence yield measurements, but is not affected by self-absorption or saturation effects. This measure of XAS is achieved by scanning the incident photon energy through an absorption edge and using an energy sensitive photon detector to measure the partial fluorescence yield (PFY). The…
▽ More
We demonstrate a new method of x-ray absorption spectroscopy (XAS) that is bulk sensitive, like traditional fluorescence yield measurements, but is not affected by self-absorption or saturation effects. This measure of XAS is achieved by scanning the incident photon energy through an absorption edge and using an energy sensitive photon detector to measure the partial fluorescence yield (PFY). The x-ray emission from any element or core-hole excitation that is not resonant with the absorption edge under investigation is selected from the PFY. It is found that the inverse of this PFY spectrum, which we term inverse partial fluorescence yield (IPFY), is linearly proportional to the x-ray absorption cross-section without any corrections due to saturation or self-absorption effects. We demonstrate this technique on the Cu L and Nd M absorption edges of the high-Tc cuprate LNSCO by measuring the O K PFY and comparing the total electron yield, total fluorescence yield and IPFY spectra.
△ Less
Submitted 18 March, 2011; v1 submitted 12 January, 2010;
originally announced January 2010.
-
Interface reconstruction in V-oxide heterostructures determined by x-ray absorption spectroscopy
Authors:
H. Wadati,
D. G. Hawthorn,
J. Geck,
T. Z. Regier,
R. I. R. Blyth,
T. Higuchi,
Y. Hotta,
Y. Hikita,
H. Y. Hwang,
G. A. Sawatzky
Abstract:
We present an x-ray absorption study of the dependence of the V oxidation state on the thickness of LaVO$_3$ (LVO) and cap** LaAlO$_3$ (LAO) layers in the multilayer structure of LVO sandwiched between LAO. We found that the change of the valence of V as a function of LAO layer thickness can be qualitatively explained by a transition between electronically reconstructed interfaces and a chemic…
▽ More
We present an x-ray absorption study of the dependence of the V oxidation state on the thickness of LaVO$_3$ (LVO) and cap** LaAlO$_3$ (LAO) layers in the multilayer structure of LVO sandwiched between LAO. We found that the change of the valence of V as a function of LAO layer thickness can be qualitatively explained by a transition between electronically reconstructed interfaces and a chemical reconstruction. The change as a function of LVO layer thickness is complicated by the presence of a considerable amount of V$^{4+}$ in the bulk of the thicker LVO layers.
△ Less
Submitted 18 June, 2009;
originally announced June 2009.