-
Wide post-common envelope binaries from Gaia: orbit validation and formation models
Authors:
Natsuko Yamaguchi,
Kareem El-Badry,
Natalie Rees,
Sahar Shahaf,
Tsevi Mazeh,
René Andrae
Abstract:
Astrometry from {\it Gaia} DR3 has enabled the discovery of a sample of 3000+ binaries containing white dwarfs (WD) and main-sequence (MS) stars in relatively wide orbits, with orbital periods $P_{\rm orb} = (100-1000)$ d. This population was not predicted by binary population synthesis models before {\it Gaia} and -- if the {\it Gaia} orbits are robust -- likely requires very efficient envelope e…
▽ More
Astrometry from {\it Gaia} DR3 has enabled the discovery of a sample of 3000+ binaries containing white dwarfs (WD) and main-sequence (MS) stars in relatively wide orbits, with orbital periods $P_{\rm orb} = (100-1000)$ d. This population was not predicted by binary population synthesis models before {\it Gaia} and -- if the {\it Gaia} orbits are robust -- likely requires very efficient envelope ejection during common envelope evolution (CEE). To assess the reliability of the {\it Gaia} solutions, we measured multi-epoch radial velocities (RVs) of 31 WD+MS binary candidates with $P_{\rm orb} = (40-300)$ d and \texttt{AstroSpectroSB1} orbital solutions. We jointly fit the RVs and astrometry, allowing us to validate the {\it Gaia} solutions and tighten constraints on component masses. We find a high success rate for the {\it Gaia} solutions, with only 2 out of the 31 systems showing significant discrepancies between their {\it Gaia} orbital solutions and our RVs. Joint fitting of RVs and astrometry allows us to directly constrain the secondary-to-primary flux ratio $\mathcal{S}$, and we find $\mathcal{S}\lesssim 0.02$ for most objects, confirming the companions are indeed WDs. We tighten constraints on the binaries' eccentricities, finding a median $e\approx 0.1$. These eccentricities are much lower than those of normal MS+MS binaries at similar periods, but much higher than predicted for binaries formed via stable mass transfer. We present MESA single and binary evolution models to explore how the binaries may have formed. The orbits of most binaries in the sample can be produced through CEE that begins when the WD progenitor is an AGB star, corresponding to initial separations of $2-5$ au. Roughly 50\% of all post-common envelope binaries are predicted to have first interacted on the AGB, ending up in wide orbits like these systems.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Architecting Complex, Long-Lived Scientific Software
Authors:
Neil A. Ernst,
John Klein,
Marco Bartolini,
Jeremy Coles,
Nick Rees
Abstract:
Software is a critical aspect of large-scale science, providing essential capabilities for making scientific discoveries. Large-scale scientific projects are vast in scope, with lifespans measured in decades and costs exceeding hundreds of millions of dollars. Successfully designing software that can exist for that span of time, at that scale, is challenging for even the most capable software comp…
▽ More
Software is a critical aspect of large-scale science, providing essential capabilities for making scientific discoveries. Large-scale scientific projects are vast in scope, with lifespans measured in decades and costs exceeding hundreds of millions of dollars. Successfully designing software that can exist for that span of time, at that scale, is challenging for even the most capable software companies. Yet scientific endeavors face challenges with funding, staffing, and operate in complex, poorly understood software settings. In this paper we discuss the practice of early-phase software architecture in the Square Kilometre Array Observatory's Science Data Processor. The Science Data Processor is a critical software component in this next-generation radio astronomy instrument. We customized an existing set of processes for software architecture analysis and design to this project's unique circumstances. We report on the series of comprehensive software architecture plans that were the result. The plans were used to obtain construction approval in a critical design review with outside stakeholders. We conclude with implications for other long-lived software architectures in the scientific domain, including potential risks and mitigations.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Information Governance as a Socio-Technical Process in the Development of Trustworthy Healthcare AI
Authors:
Nigel Rees,
Kelly Holding,
Mark Sujan
Abstract:
In order to develop trustworthy healthcare artificial intelligence (AI) prospective and ergonomics studies that consider the complexity and reality of real-world applications of AI systems are needed. To achieve this, technology developers and deploying organisations need to form collaborative partnerships. This entails access to healthcare data, which frequently might also include potentially ide…
▽ More
In order to develop trustworthy healthcare artificial intelligence (AI) prospective and ergonomics studies that consider the complexity and reality of real-world applications of AI systems are needed. To achieve this, technology developers and deploying organisations need to form collaborative partnerships. This entails access to healthcare data, which frequently might also include potentially identifiable data such as audio recordings of calls made to an ambulance service call centre. Information Governance (IG) processes have been put in place to govern the use of personal confidential data. However, navigating IG processes in the formative stages of AI development and pre-deployment can be challenging, because the legal basis for data sharing is explicit only for the purpose of delivering patient care, i.e., once a system is put into service. In this paper we describe our experiences of managing IG for the assurance of healthcare AI, using the example of an out-of-hospital-cardiac-arrest recognition software within the context of the Welsh Ambulance Service. We frame IG as a socio-technical process. IG processes for the development of trustworthy healthcare AI rely on information governance work, which entails dialogue, negotiation, and trade-offs around the legal basis for data sharing, data requirements and data control. Information governance work should start early in the design life cycle and will likely continue throughout. This includes a focus on establishing and building relationships, as well as a focus on organisational readiness deeper understanding of both AI technologies as well as their safety assurance requirements.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
From SKA to SKAO: Early Progress in the SKAO Construction
Authors:
J. Santander-Vela,
M. Bartolini,
and,
M. Miccolis,
N. Rees
Abstract:
The Square Kilometre Array telescopes have recently started their construction phase, after years of pre-construction effort. The new SKA Observatory (SKAO) intergovernmental organisation has been created, and the start of construction ($\mathrm{T_0}$) has already happened. In this talk, we summarise the construction progress of our facility, and the role that agile software development and open-s…
▽ More
The Square Kilometre Array telescopes have recently started their construction phase, after years of pre-construction effort. The new SKA Observatory (SKAO) intergovernmental organisation has been created, and the start of construction ($\mathrm{T_0}$) has already happened. In this talk, we summarise the construction progress of our facility, and the role that agile software development and open-source collaboration, and in particular the development of our TANGO-based control system, is playing.
△ Less
Submitted 25 October, 2021;
originally announced October 2021.
-
Anomalous thermal expansion in one-dimensional transition-metal cyanides: Behavior of the trimetallic cyanide Cu$_{1/3}$Ag$_{1/3}$Au$_{1/3}$CN
Authors:
Stella d'Ambrumenil,
Mohamed Zbiri,
Simon J. Hibble,
Ann M. Chippindale,
Dean S. Keeble,
Camille Wright,
Nicholas H. Rees
Abstract:
The structural dynamics of a 1D mixed-metal cyanide, Cu$_{1/3}$Ag$_{1/3}$Au$_{1/3}$CN, with intriguing thermal properties is explored. All the current known related compounds with straight-chain structures, such as CuCN, AgCN, AuCN and M$_x$M'$_{1-x}$CN (M, M' = Cu, Ag, Au), exhibit 1D negative thermal expansion (NTE) along the chains and positive thermal expansion (PTE) perpendicular to them. Cu…
▽ More
The structural dynamics of a 1D mixed-metal cyanide, Cu$_{1/3}$Ag$_{1/3}$Au$_{1/3}$CN, with intriguing thermal properties is explored. All the current known related compounds with straight-chain structures, such as CuCN, AgCN, AuCN and M$_x$M'$_{1-x}$CN (M, M' = Cu, Ag, Au), exhibit 1D negative thermal expansion (NTE) along the chains and positive thermal expansion (PTE) perpendicular to them. Cu$_{1/3}$Ag$_{1/3}$Au$_{1/3}$CN exhibits similar PTE perpendicular to the chains, however PTE, rather than NTE, is also observed along the chains. In order to understand the origin of this unexpected behavior, inelastic neutron scattering (INS) measurements were carried out, underpinned by DFT calculations. Synchrotron-based PDF analysis and 13C SSNMR measurements were also performed to build an input structural model for the lattice dynamical study. The results indicate that transverse motions of the metal ions are responsible for the PTE perpendicular to the chains, as is the case for the related group 11 cyanides. However NTE along the chain due to the tension effect of these transverse motions is not observed. For this system, DFT-based phonon calculations predict small PTE along the chain due to low-energy chain-slip** modes induced by a bond-rotation effect on the weak metallophilic bonds. However the observed PTE is greater than that predicted with the straight-chain model. Small bends in the chain to accommodate truly co-planar metals provide an alternative explanation for thermal behavior. These would mitigate the tension effect induced by the transverse motions of the metals and, as temperature increases and the chains move further apart, a straightening could occur resulting in the observed PTE. This hypothesis is further supported by unusual evolution in the phonon spectra, which suggest small changes in local symmetry with temperature.
△ Less
Submitted 20 November, 2019; v1 submitted 1 October, 2019;
originally announced October 2019.
-
Analytical Estimation of the Width of Hadley Cells in the Solar System
Authors:
Karlie N. Rees,
Timothy J. Garrett
Abstract:
The angular width of Earth's Hadley cell has been related to the square root of the product of the tropospheric thickness and the buoyancy frequency, and to the inverse of the square root of the angular velocity and the planetary radius. Here, this formulation is examined for other planetary bodies in the solar system. Generally good consistency is found between predictions and observations for te…
▽ More
The angular width of Earth's Hadley cell has been related to the square root of the product of the tropospheric thickness and the buoyancy frequency, and to the inverse of the square root of the angular velocity and the planetary radius. Here, this formulation is examined for other planetary bodies in the solar system. Generally good consistency is found between predictions and observations for terrestrial planets provided the pressure scale height rather than the tropopause height is assumed to determine the thickness of the tropospheric circulation. For gas giants, the relevant thickness is deeper than the scale height, possibly due to the internal heat produced by Kelvin-Helmholtz contraction. On Earth, latent heat release within deep convection may play a similar role in deepening and widening the Hadley Cell.
△ Less
Submitted 1 March, 2019;
originally announced March 2019.
-
HARP/ACSIS: A submillimetre spectral imaging system on the James Clerk Maxwell Telescope
Authors:
J. V. Buckle,
R. E. Hills,
H. Smith,
W. R. F. Dent,
G. Bell,
E. I. Curtis,
R. Dace,
H. Gibson,
S. F. Graves,
J. Leech,
J. S. Richer,
R. Williamson,
S. Withington,
G. Yassin,
R. Bennett,
P. Hastings,
I. Laidlaw,
J. F. Lightfoot,
T. Burgess,
P. E. Dewdney,
G. Hovey,
A. G. Willis,
R. Redman,
B. Wooff,
D. S. Berry
, et al. (13 additional authors not shown)
Abstract:
This paper describes a new Heterodyne Array Receiver Programme (HARP) and Auto-Correlation Spectral Imaging System (ACSIS) that have recently been installed and commissioned on the James Clerk Maxwell Telescope (JCMT). The 16-element focal-plane array receiver, operating in the submillimetre from 325 to 375 GHz, offers high (three-dimensional) map** speeds, along with significant improvements…
▽ More
This paper describes a new Heterodyne Array Receiver Programme (HARP) and Auto-Correlation Spectral Imaging System (ACSIS) that have recently been installed and commissioned on the James Clerk Maxwell Telescope (JCMT). The 16-element focal-plane array receiver, operating in the submillimetre from 325 to 375 GHz, offers high (three-dimensional) map** speeds, along with significant improvements over single-detector counterparts in calibration and image quality. Receiver temperatures are $\sim$120 K across the whole band and system temperatures of $\sim$300K are reached routinely under good weather conditions. The system includes a single-sideband filter so these are SSB figures. Used in conjunction with ACSIS, the system can produce large-scale maps rapidly, in one or more frequency settings, at high spatial and spectral resolution. Fully-sampled maps of size 1 square degree can be observed in under 1 hour.
The scientific need for array receivers arises from the requirement for programmes to study samples of objects of statistically significant size, in large-scale unbiased surveys of galactic and extra-galactic regions. Along with morphological information, the new spectral imaging system can be used to study the physical and chemical properties of regions of interest. Its three-dimensional imaging capabilities are critical for research into turbulence and dynamics. In addition, HARP/ACSIS will provide highly complementary science programmes to wide-field continuum studies, and produce the essential preparatory work for submillimetre interferometers such as the SMA and ALMA.
△ Less
Submitted 21 July, 2009;
originally announced July 2009.
-
Seeing statistics at the upgraded 3.8m UK infrared telescope (UKIRT)
Authors:
Marc S. Seigar,
Andy J. Adamson,
Nicholas P. Rees,
Timothy G. Hawarden,
Malcolm Currie,
Timothy C. Chuter
Abstract:
From 1991 until 1997, the 3.8m UK Infrared Telescope (UKIRT) underwent a programme of upgrades aimed at improving its intrinsic optical performance. This resulted in images with a FWHM of 0."17 at 2.2 um in September 1998. To understand and maintain the improvements to the delivered image quality since the completion of the upgrades programme, we have regularly monitored the overall atmospheric…
▽ More
From 1991 until 1997, the 3.8m UK Infrared Telescope (UKIRT) underwent a programme of upgrades aimed at improving its intrinsic optical performance. This resulted in images with a FWHM of 0."17 at 2.2 um in September 1998. To understand and maintain the improvements to the delivered image quality since the completion of the upgrades programme, we have regularly monitored the overall atmospheric seeing, as measured by radial displacements of subaperture images (i.e. seeing-generated focus fluctuations), and the delivered image diameters. The latter have been measured and recorded automatically since the beginning of 2001 whenever the facility imager UFTI (UKIRT Fast Track Imager) has been in use.
In this paper we report the results of these measurements. We investigate the relation between the delivered image diameter and the RMS atmospheric seeing (as measured by focus fluctuations, mentioned above). We find that the best seeing occurs in the second half of the night, generally after 2am HST and that the best seeing occurs in the summer between the months of July and September. We also find that the relationship between Zrms and delivered image diameter is uncertain. As a result Zrms frequently predicts a larger FWHM than that measured in the images.
Finally, we show that there is no correlation between near-infrared seeing measured at UKIRT and sub-mm seeing measured at the Caltech Submillimetre Observatory (CSO).
△ Less
Submitted 25 August, 2002;
originally announced August 2002.
