-
A comparison of continuous and pulsed sideband cooling on an electric quadrupole transition
Authors:
Evan C. Reed,
Lu Qi,
Kenneth R. Brown
Abstract:
Sideband cooling enables preparation of trapped ion motion near the ground state and is essential for many scientific and technological applications of trapped ion devices. Here, we study the efficiency of continuous and pulsed sideband cooling using both first- and second-order sidebands applied to an ion where the motion starts outside the Lamb-Dicke regime. We find that after optimizing these d…
▽ More
Sideband cooling enables preparation of trapped ion motion near the ground state and is essential for many scientific and technological applications of trapped ion devices. Here, we study the efficiency of continuous and pulsed sideband cooling using both first- and second-order sidebands applied to an ion where the motion starts outside the Lamb-Dicke regime. We find that after optimizing these distinct cooling methods, pulsed and continuous cooling achieve similar results based on simulations and experiments with a $^{40}$Ca$^+$ ion. We consider optimization of both average phonon number $\overline{n}$ and population in the ground state. We also demonstrate the disparity between $\overline{n}$ as measured by the sideband ratio method of trapped ion thermometry and the $\overline{n}$ found by averaging over the ion's motional state distribution.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Robust Quantum Control in Closed and Open Systems: Theory and Practice
Authors:
C. A. Weidner,
E. A. Reed,
J. Monroe,
B. Sheller,
S. O'Neil,
E. Maas,
E. A. Jonckheere,
F. C. Langbein,
S. G. Schirmer
Abstract:
Robust control of quantum systems is an increasingly relevant field of study amidst the second quantum revolution, but there remains a gap between taming quantum physics and robust control in its modern analytical form that culminated in fundamental performance bounds. In general, quantum systems are not amenable to linear, time-invariant, measurement-based robust control techniques, and thus nove…
▽ More
Robust control of quantum systems is an increasingly relevant field of study amidst the second quantum revolution, but there remains a gap between taming quantum physics and robust control in its modern analytical form that culminated in fundamental performance bounds. In general, quantum systems are not amenable to linear, time-invariant, measurement-based robust control techniques, and thus novel gap-bridging techniques must be developed. This survey is written for control theorists to highlight parallels between the current state of quantum control and classical robust control. We present issues that arise when applying classical robust control theory to quantum systems, typical methods used by quantum physicists to explore such systems and their robustness, as well as a discussion of open problems to be addressed in the field. We focus on general, practical applications and recent work to enable control researchers to contribute to advancing this burgeoning field.
△ Less
Submitted 30 December, 2023;
originally announced January 2024.
-
An Isomorphism Theorem for Arithmetic Complexes
Authors:
Luca Fiorindo,
Ethan Reed,
Shahriyar Roshan-Zamir,
Hongmiao Yu
Abstract:
We consider generalizations of certain arithmetic complexes appearing in work of Raicu and VandeBogert in connection with the study of stable sheaf cohomology on flag varieties. Defined over the ring of integer valued polynomials, we prove an isomorphism of these complexes as conjectured by Gao, Raicu, and VandeBogert. In particular, this gives a more conceptual proof of an identification between…
▽ More
We consider generalizations of certain arithmetic complexes appearing in work of Raicu and VandeBogert in connection with the study of stable sheaf cohomology on flag varieties. Defined over the ring of integer valued polynomials, we prove an isomorphism of these complexes as conjectured by Gao, Raicu, and VandeBogert. In particular, this gives a more conceptual proof of an identification between the stable sheaf cohomology of hook and two column partition Schur functors applied to the cotangent sheaf of projective space.
△ Less
Submitted 29 September, 2023;
originally announced September 2023.
-
Electrolyte Coatings for High Adhesion Interfaces in Solid-state Batteries from First Principles
Authors:
Brandi Ransom,
Akash Ramdas,
Eder Lomeli,
Jad Fidawi,
Austin Sendek,
Thomas Devereaux,
Evan Reed,
Peter Schindler
Abstract:
We introduce an adhesion parameter that enables rapid screening for materials interfaces with high adhesion. This parameter is obtained by density functional theory calculations of individual single-material slabs rather than slabs consisting of combinations of two materials, eliminating the need to calculate all configurations of a prohibitively vast space of possible interface configurations. Cl…
▽ More
We introduce an adhesion parameter that enables rapid screening for materials interfaces with high adhesion. This parameter is obtained by density functional theory calculations of individual single-material slabs rather than slabs consisting of combinations of two materials, eliminating the need to calculate all configurations of a prohibitively vast space of possible interface configurations. Cleavage energy calculations are used as an upper bound for electrolyte and coating energies and implemented in an adapted contact angle equation to derive the adhesion parameter. In addition to good adhesion, we impose further constraints in electrochemical stability window, abundance, bulk reactivity, and stability to screen for coating materials for next-generation solid-state batteries. Good adhesion is critical in combating delamination and resistance to Lithium diffusivity in solid-state batteries. Here, we identify several promising coating candidates for the Li7La3Zr2O12 and sulfide electrolyte systems including the previously investigated electrode coating materials LiAlSiO4 and Li5AlO8, making them especially attractive for experimental optimization and commercialization.
△ Less
Submitted 28 March, 2023;
originally announced March 2023.
-
Adiabatically controlled motional states of a ground-state cooled CaO$^{+}$ and Ca$^{+}$ trapped ion chain
Authors:
Lu Qi,
Evan C. Reed,
Kenneth R. Brown
Abstract:
Control of the external degree of freedom of trapped molecular ions is a prerequisite for their promising applications to spectroscopy, precision measurements of fundamental constants, and quantum information technology. Here, we demonstrate near ground-state cooling of the axial motional modes of a calcium mono-oxide ion via sympathetic sideband cooling with a co-trapped calcium ion. We also show…
▽ More
Control of the external degree of freedom of trapped molecular ions is a prerequisite for their promising applications to spectroscopy, precision measurements of fundamental constants, and quantum information technology. Here, we demonstrate near ground-state cooling of the axial motional modes of a calcium mono-oxide ion via sympathetic sideband cooling with a co-trapped calcium ion. We also show that the phonon state of the axial out-of-phase mode of the ion chain is maintained while the mode frequency is adiabatically ramped up and down. The adiabatic ram** of the motional mode frequency is a prerequisite for searching for the proposed molecular dipole-phonon interaction.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Emergence of Layer Stacking Disorder in c-axis Confined MoTe$_2$
Authors:
James L Hart,
Lopa Bhatt,
Yanbing Zhu,
Myung-Geun Han,
Elisabeth Bianco,
Shunran Li,
David J Hynek,
John A Schneeloch,
Yu Tao,
Despina Louca,
Peijun Guo,
Yimei Zhu,
Felipe Jornada,
Evan J Reed,
Lena F Kourkoutis,
Judy J Cha
Abstract:
The layer stacking order in 2D materials strongly affects functional properties and holds promise for next generation electronic devices. In bulk, octahedral MoTe$_2$ possesses two stacking arrangements, the Weyl semimetal T$_d$ phase, and the higher-order topological insulator 1T' phase; however, it remains unclear if thin exfoliated flakes of MoTe$_2$ follow the T$_d$, 1T', or an alternative sta…
▽ More
The layer stacking order in 2D materials strongly affects functional properties and holds promise for next generation electronic devices. In bulk, octahedral MoTe$_2$ possesses two stacking arrangements, the Weyl semimetal T$_d$ phase, and the higher-order topological insulator 1T' phase; however, it remains unclear if thin exfoliated flakes of MoTe$_2$ follow the T$_d$, 1T', or an alternative stacking sequence. Here, we resolve this debate using atomic-resolution imaging within the transmission electron microscope. We find that the layer stacking in thin flakes of MoTe$_2$ is highly disordered and pseudo-random, which we attribute to intrinsic confinement effects. Conversely, WTe$_2$, which is isostructural and isoelectronic to MoTe$_2$, displays ordered stacking even for thin exfoliated flakes. Our results are important for understanding the quantum properties of MoTe$_2$ devices, and suggest that thickness may be used to alter the layer stacking in other 2D materials.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
Predicting Molecule Size Distribution in Hydrocarbon Pyrolysis using Random Graph Theory
Authors:
Vincent Dufour-Décieux,
Christopher Moakler,
Maria Cameron,
Evan J. Reed
Abstract:
Hydrocarbon pyrolysis is a complex process involving large numbers of chemical species and types of chemical reactions. Its quantitative description is important for planetary sciences, in particular, for understanding the processes occurring in the interior of icy planets, such as Uranus and Neptune, where small hydrocarbons are subjected to high temperature and pressure. We propose a computation…
▽ More
Hydrocarbon pyrolysis is a complex process involving large numbers of chemical species and types of chemical reactions. Its quantitative description is important for planetary sciences, in particular, for understanding the processes occurring in the interior of icy planets, such as Uranus and Neptune, where small hydrocarbons are subjected to high temperature and pressure. We propose a computationally cheap methodology based on an originally developed ten-reaction model, and the configurational model from random graph theory. This methodology yields to accurate predictions for molecule size distributions for a variety of initial chemical compositions and temperatures ranging from 3200K to 5000K. Specifically, we show that the size distribution of small molecules is particularly well predicted, and the size of the largest molecule can be accurately predicted provided that it is not too large.
△ Less
Submitted 8 September, 2022; v1 submitted 26 May, 2022;
originally announced May 2022.
-
Fractional cyber-neural systems -- a brief survey
Authors:
Emily Reed,
Sarthak Chatterjee,
Guilherme Ramos,
Paul Bogdan,
Sérgio Pequito
Abstract:
Neurotechnology has made great strides in the last 20 years. However, we still have a long way to go to commercialize many of these technologies as we lack a unified framework to study cyber-neural systems (CNS) that bring the hardware, software, and the neural system together. Dynamical systems play a key role in develo** these technologies as they capture different aspects of the brain and pro…
▽ More
Neurotechnology has made great strides in the last 20 years. However, we still have a long way to go to commercialize many of these technologies as we lack a unified framework to study cyber-neural systems (CNS) that bring the hardware, software, and the neural system together. Dynamical systems play a key role in develo** these technologies as they capture different aspects of the brain and provide insight into their function. Converging evidence suggests that fractional-order dynamical systems are advantageous in modeling neural systems because of their compact representation and accuracy in capturing the long-range memory exhibited in neural behavior. In this brief survey, we provide an overview of fractional CNS that entails fractional-order systems in the context of CNS. In particular, we introduce basic definitions required for the analysis and synthesis of fractional CNS, encompassing system identification, state estimation, and closed-loop control. Additionally, we provide an illustration of some applications in the context of CNS and draw some possible future research directions. Ultimately, advancements in these three areas will be critical in develo** the next generation of CNS, which will, ultimately, improve people's quality of life.
△ Less
Submitted 15 December, 2021;
originally announced December 2021.
-
Minimum Structural Sensor Placement for Switched Linear Time-Invariant Systems and Unknown Inputs
Authors:
Emily A. Reed,
Guilherme Ramos,
Paul Bogdan,
Sérgio Pequito
Abstract:
In this paper, we study the structural state and input observability of continuous-time switched linear time-invariant systems and unknown inputs. First, we provide necessary and sufficient conditions for their structural state and input observability that can be efficiently verified in $O((m(n+p))^2)$, where $n$ is the number of state variables, $p$ is the number of unknown inputs, and $m$ is the…
▽ More
In this paper, we study the structural state and input observability of continuous-time switched linear time-invariant systems and unknown inputs. First, we provide necessary and sufficient conditions for their structural state and input observability that can be efficiently verified in $O((m(n+p))^2)$, where $n$ is the number of state variables, $p$ is the number of unknown inputs, and $m$ is the number of modes. Moreover, we address the minimum sensor placement problem for these systems by adopting a feed-forward analysis and by providing an algorithm with a computational complexity of $ O((m(n+p)+α)^{2.373})$, where $α$ is the number of target strongly connected components of the system's digraph representation. Lastly, we explore different assumptions on both the system and unknown inputs (latent space) dynamics that add more structure to the problem, and thereby, enable us to render algorithms with lower computational complexity, which are suitable for implementation in large-scale systems.
△ Less
Submitted 28 July, 2021;
originally announced July 2021.
-
A scalable distributed dynamical systems approach to compute the strongly connected components and diameter of networks
Authors:
Emily A. Reed,
Guilherme Ramos,
Paul Bogdan,
Sérgio Pequito
Abstract:
Finding strongly connected components (SCCs) and the diameter of a directed network play a key role in a variety of discrete optimization problems, and subsequently, machine learning and control theory problems. On the one hand, SCCs are used in solving the 2-satisfiability problem, which has applications in clustering, scheduling, and visualization. On the other hand, the diameter has application…
▽ More
Finding strongly connected components (SCCs) and the diameter of a directed network play a key role in a variety of discrete optimization problems, and subsequently, machine learning and control theory problems. On the one hand, SCCs are used in solving the 2-satisfiability problem, which has applications in clustering, scheduling, and visualization. On the other hand, the diameter has applications in network learning and discovery problems enabling efficient internet routing and searches, as well as identifying faults in the power grid.
In this paper, we leverage consensus-based principles to find the SCCs in a scalable and distributed fashion with a computational complexity of $\mathcal{O}\left(Dd_{\text{in-degree}}^{\max}\right)$, where $D$ is the (finite) diameter of the network and $d_{\text{in-degree}}^{\max}$ is the maximum in-degree of the network. Additionally, we prove that our algorithm terminates in $D+1$ iterations, which allows us to retrieve the diameter of the network. We illustrate the performance of our algorithm on several random networks, including Erdős-Rényi, Barabási-Albert, and \mbox{Watts-Strogatz} networks.
△ Less
Submitted 24 June, 2021; v1 submitted 21 May, 2021;
originally announced May 2021.
-
Atomic-Level Features for Kinetic Monte Carlo Models of Complex Chemistry from Molecular Dynamics Simulations
Authors:
Vincent Dufour-Décieux,
Rodrigo Freitas,
Evan J. Reed
Abstract:
The high computational cost of evaluating atomic interactions recently motivated the development of computationally inexpensive kinetic models, which can be parametrized from MD simulations of complex chemistry of thousands of species or other processes and accelerate the prediction of the chemical evolution by up to four order of magnitude. Such models go beyond the commonly employed potential en…
▽ More
The high computational cost of evaluating atomic interactions recently motivated the development of computationally inexpensive kinetic models, which can be parametrized from MD simulations of complex chemistry of thousands of species or other processes and accelerate the prediction of the chemical evolution by up to four order of magnitude. Such models go beyond the commonly employed potential energy surface fitting methods in that they are aimed purely at describing kinetic effects. So far, such kinetic models utilize molecular descriptions of reactions and have been constrained to only reproduce molecules previously observed in MD simulations. Therefore, these descriptions fail to predict the reactivity of unobserved molecules, for example in the case of large molecules or solids. Here we propose a new approach for the extraction of reaction mechanisms and reaction rates from MD simulations, namely the use of atomic-level features. Using the complex chemical network of hydrocarbon pyrolysis as example, it is demonstrated that kinetic models built using atomic features are able to explore chemical reaction pathways never observed in the MD simulations used to parametrize them. Atomic-level features are shown to construct reaction mechanisms and estimate reaction rates of unknown molecular species from elementary atomic events. Through comparisons of the model ability to extrapolate to longer simulation timescales and different chemical compositions than the ones used for parameterization, it is demonstrated that kinetic models employing atomic features retain the same level of accuracy and transferability as the use of features based on molecular species, while being more compact and parametrized with less data. We also find that atomic features can better describe the formation of large molecules enabling the simultaneous description of small molecules and condensed phases.
△ Less
Submitted 12 May, 2021; v1 submitted 26 January, 2021;
originally announced January 2021.
-
Dataset of Random Relaxations for Crystal Structure Search of Li-Si System
Authors:
Gowoon Cheon,
Lusann Yang,
Kevin McCloskey,
Evan J. Reed,
Ekin D. Cubuk
Abstract:
Crystal structure search is a long-standing challenge in materials design. We present a dataset of more than 100,000 structural relaxations of potential battery anode materials from randomized structures using density functional theory calculations. We illustrate the usage of the dataset by training graph neural networks to predict structural relaxations from randomly generated structures. Our mod…
▽ More
Crystal structure search is a long-standing challenge in materials design. We present a dataset of more than 100,000 structural relaxations of potential battery anode materials from randomized structures using density functional theory calculations. We illustrate the usage of the dataset by training graph neural networks to predict structural relaxations from randomly generated structures. Our models directly predict stresses in addition to forces, which allows them to accurately simulate relaxations of both ionic positions and lattice vectors. We show that models trained on the molecular dynamics simulations fail to simulate relaxations from random structures, while training on our data leads to up to two orders of magnitude decrease in error for the same task. Our model is able to find an experimentally verified structure of a stoichiometry held out from training. We find that randomly perturbing atomic positions during training improves both the accuracy and out of domain generalization of the models.
△ Less
Submitted 8 March, 2023; v1 submitted 4 December, 2020;
originally announced December 2020.
-
Discovery of stable surfaces with extreme work functions by high-throughput density functional theory and machine learning
Authors:
Peter Schindler,
Evan R. Antoniuk,
Gowoon Cheon,
Yanbing Zhu,
Evan J. Reed
Abstract:
The work function is the key surface property that determines how much energy is required for an electron to escape the surface of a material. This property is crucial for thermionic energy conversion, band alignment in heterostructures, and electron emission devices. Here, we present a high-throughput workflow using density functional theory (DFT) to calculate the work function and cleavage energ…
▽ More
The work function is the key surface property that determines how much energy is required for an electron to escape the surface of a material. This property is crucial for thermionic energy conversion, band alignment in heterostructures, and electron emission devices. Here, we present a high-throughput workflow using density functional theory (DFT) to calculate the work function and cleavage energy of 33,631 slabs (58,332 work functions) that we created from 3,716 bulk materials, including up to ternary compounds. The number of materials for which we calculated surface properties surpasses the previously largest database, the Materials Project, by a factor of $\sim$27. On the tail ends of the work function distribution we identify 34 and 56 surfaces with an ultra-low (<2 eV) and ultra-high (>7 eV) work function, respectively. Further, we discover that the $(100)$-Ba-O surface of BaMoO$_3$ and the $(001)$-F surface of Ag$_2$F have record-low (1.25 eV) and record-high (9.06 eV) steady-state work functions without requiring coatings, respectively. Based on this database we develop a physics-based approach to featurize surfaces and use supervised machine learning to predict the work function. We find that physical choice of features improves prediction performance far more than choice of model. Our random forest model achieves a mean absolute test error of 0.09 eV, which is more than 6 times better than the baseline and comparable to the accuracy of DFT. This surrogate model enables rapid predictions of the work function ($\sim 10^5$ faster than DFT) across a vast chemical space and facilitates the discovery of material surfaces with extreme work functions for energy conversion, electronic applications, and contacts in 2-dimensional devices.
△ Less
Submitted 5 January, 2024; v1 submitted 21 November, 2020;
originally announced November 2020.
-
A data-centric framework for crystal structure identification in atomistic simulations using machine learning
Authors:
Heejung Chung,
Rodrigo Freitas,
Gowoon Cheon,
Evan J. Reed
Abstract:
Atomic-level modeling performed at large scales enables the investigation of mesoscale materials properties with atom-by-atom resolution. The spatial complexity of such cross-scale simulations renders them unsuitable for simple human visual inspection. Instead, specialized structure characterization techniques are required to aid interpretation. These have historically been challenging to construc…
▽ More
Atomic-level modeling performed at large scales enables the investigation of mesoscale materials properties with atom-by-atom resolution. The spatial complexity of such cross-scale simulations renders them unsuitable for simple human visual inspection. Instead, specialized structure characterization techniques are required to aid interpretation. These have historically been challenging to construct, requiring significant intuition and effort. Here we propose an alternative framework for a fundamental structural characterization task: classifying atoms according to the crystal structure to which they belong. Our approach is data-centric and favors the employment of Machine Learning over heuristic rules of classification. A group of data-science tools and simple local descriptors of atomic structure are employed together with an efficient synthetic training set. We also introduce the first standard and publicly available benchmark data set for evaluation of algorithms for crystal-structure classification. It is demonstrated that our data-centric framework outperforms all of the most popular heuristic methods -- especially at high temperatures when lattices are the most distorted -- while introducing a systematic route for generalization to new crystal structures. Moreover, through the use of outlier detection algorithms our approach is capable of discerning between amorphous atomic motifs (i.e., noncrystalline phases) and unknown crystal structures, making it uniquely suited for exploratory materials synthesis simulations.
△ Less
Submitted 4 April, 2022; v1 submitted 9 October, 2020;
originally announced October 2020.
-
Dipole-phonon quantum logic with alkaline-earth monoxide and monosulfide cations
Authors:
Michael Mills,
Hao Wu,
Evan C. Reed,
Lu Qi,
Kenneth R. Brown,
Christian Schneider,
Michael C. Heaven,
Wesley C. Campbell,
Eric R. Hudson
Abstract:
Dipole-phonon quantum logic (DPQL) leverages the interaction between polar molecular ions and the motional modes of a trapped-ion Coulomb crystal to provide a potentially scalable route to quantum information science. Here, we study a class of candidate molecular ions for DPQL, the cationic alkaline-earth monoxides and monosulfides, which possess suitable structure for DPQL and can be produced in…
▽ More
Dipole-phonon quantum logic (DPQL) leverages the interaction between polar molecular ions and the motional modes of a trapped-ion Coulomb crystal to provide a potentially scalable route to quantum information science. Here, we study a class of candidate molecular ions for DPQL, the cationic alkaline-earth monoxides and monosulfides, which possess suitable structure for DPQL and can be produced in existing atomic ion experiments with little additional complexity. We present calculations of DPQL operations for one of these molecules, CaO$^+$, and discuss progress towards experimental realization. We also further develop the theory of DPQL to include state preparation and measurement and entanglement of multiple molecular ions.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
The Joint Automated Repository for Various Integrated Simulations (JARVIS) for data-driven materials design
Authors:
Kamal Choudhary,
Kevin F. Garrity,
Andrew C. E. Reid,
Brian DeCost,
Adam J. Biacchi,
Angela R. Hight Walker,
Zachary Trautt,
Jason Hattrick-Simpers,
A. Gilad Kusne,
Andrea Centrone,
Albert Davydov,
Jie Jiang,
Ruth Pachter,
Gowoon Cheon,
Evan Reed,
Ankit Agrawal,
Xiaofeng Qian,
Vinit Sharma,
Houlong Zhuang,
Sergei V. Kalinin,
Bobby G. Sumpter,
Ghanshyam Pilania,
Pinar Acar,
Subhasish Mandal,
Kristjan Haule
, et al. (3 additional authors not shown)
Abstract:
The Joint Automated Repository for Various Integrated Simulations (JARVIS) is an integrated infrastructure to accelerate materials discovery and design using density functional theory (DFT), classical force-fields (FF), and machine learning (ML) techniques. JARVIS is motivated by the Materials Genome Initiative (MGI) principles of develo** open-access databases and tools to reduce the cost and d…
▽ More
The Joint Automated Repository for Various Integrated Simulations (JARVIS) is an integrated infrastructure to accelerate materials discovery and design using density functional theory (DFT), classical force-fields (FF), and machine learning (ML) techniques. JARVIS is motivated by the Materials Genome Initiative (MGI) principles of develo** open-access databases and tools to reduce the cost and development time of materials discovery, optimization, and deployment. The major features of JARVIS are: JARVIS-DFT, JARVIS-FF, JARVIS-ML, and JARVIS-Tools. To date, JARVIS consists of 40,000 materials and 1 million calculated properties in JARVIS-DFT, 1,500 materials and 110 force-fields in JARVIS-FF, and 25 ML models for material-property predictions in JARVIS-ML, all of which are continuously expanding. JARVIS-Tools provides scripts and workflows for running and analyzing various simulations. We compare our computational data to experiments or high-fidelity computational methods wherever applicable to evaluate error/uncertainty in predictions. In addition to the existing workflows, the infrastructure can support a wide variety of other technologically important applications as part of the data-driven materials design paradigm. The JARVIS datasets and tools are publicly available at the website: https://jarvis.nist.gov .
△ Less
Submitted 11 July, 2021; v1 submitted 3 July, 2020;
originally announced July 2020.
-
Uncovering the effects of interface-induced ordering of liquid on crystal growth using machine learning
Authors:
Rodrigo Freitas,
Evan J. Reed
Abstract:
The process of crystallization is often understood in terms of the fundamental microstructural elements of the crystallite being formed, such as surface orientation or the presence of defects. Considerably less is known about the role of the liquid structure on the kinetics of crystal growth. Here atomistic simulations and machine learning methods are employed together to demonstrate that the liqu…
▽ More
The process of crystallization is often understood in terms of the fundamental microstructural elements of the crystallite being formed, such as surface orientation or the presence of defects. Considerably less is known about the role of the liquid structure on the kinetics of crystal growth. Here atomistic simulations and machine learning methods are employed together to demonstrate that the liquid adjacent to solid-liquid interfaces presents significant structural ordering, which effectively reduces the mobility of atoms and slows down the crystallization kinetics. Through detailed studies of silicon and copper we discover that the extent to which liquid mobility is affected by interface-induced ordering (IIO) varies greatly with the degree of ordering and nature of the adjacent interface. Physical mechanisms behind the IIO anisotropy are explained and it is demonstrated that incorporation of this effect on a physically-motivated crystal growth model enables the quantitative prediction of the growth rate temperature dependence.
△ Less
Submitted 30 June, 2020; v1 submitted 12 September, 2019;
originally announced September 2019.
-
Deep 2FBSDEs For Systems With Control Multiplicative Noise
Authors:
Marcus A Pereira,
Ziyi Wang,
Tianrong Chen,
Emily Reed,
Evangelos A Theodorou
Abstract:
We present a deep recurrent neural network architecture to solve a class of stochastic optimal control problems described by fully nonlinear Hamilton Jacobi Bellmanpartial differential equations. Such PDEs arise when one considers stochastic dynamics characterized by uncertainties that are additive and control multiplicative. Stochastic models with the aforementioned characteristics have been used…
▽ More
We present a deep recurrent neural network architecture to solve a class of stochastic optimal control problems described by fully nonlinear Hamilton Jacobi Bellmanpartial differential equations. Such PDEs arise when one considers stochastic dynamics characterized by uncertainties that are additive and control multiplicative. Stochastic models with the aforementioned characteristics have been used in computational neuroscience, biology, finance and aerospace systems and provide a more accurate representation of actuation than models with additive uncertainty. Previous literature has established the inadequacy of the linear HJB theory and instead rely on a non-linear Feynman-Kac lemma resulting in a second order forward-backward stochastic differential equations representation. However, the proposed solutions that use this representation suffer from compounding errors and computational complexity leading to lack of scalability. In this paper, we propose a deep learning based algorithm that leverages the second order Forward-Backward SDE representation and LSTM based recurrent neural networks to not only solve such Stochastic Optimal Control problems but also overcome the problems faced by previous approaches and scales well to high dimensional systems. The resulting control algorithm is tested on non-linear systems in robotics and biomechanics to demonstrate feasibility and out-performance against previous methods.
△ Less
Submitted 20 December, 2019; v1 submitted 11 June, 2019;
originally announced June 2019.
-
Reversible Electrochemical Phase Change in Monolayer to Bulk MoTe2 by Ionic Liquid Gating
Authors:
Dante Zakhidov,
Daniel A. Rehn,
Evan J. Reed,
Alberto Salleo
Abstract:
Transition metal dichalcogenides (TMDs) exist in various crystal structures with semiconducting, semi-metallic, and metallic properties. The dynamic control of these phases is of immediate interest for next generation electronics such as phase change memories. Of the binary Mo and W-based TMDs, MoTe2 is attractive for electronic applications because it has the lowest energy difference (40 meV) bet…
▽ More
Transition metal dichalcogenides (TMDs) exist in various crystal structures with semiconducting, semi-metallic, and metallic properties. The dynamic control of these phases is of immediate interest for next generation electronics such as phase change memories. Of the binary Mo and W-based TMDs, MoTe2 is attractive for electronic applications because it has the lowest energy difference (40 meV) between the semiconducting (2H) and semi-metallic (1T') phases, allowing for MoTe2 phase change by electrostatic do**. Here we report phase change between the 2H and 1T' polymorphs of MoTe2 in thicknesses ranging from the monolayer case to effective bulk (73nm) using an ionic liquid electrolyte at room temperature and in air. We find consistent evidence of a partially reversible 2H-1T' transition using in-situ Raman spectroscopy where the phase change occurs in the top-most layers of the MoTe2 flake. We find a thickness-dependent transition voltage where higher voltages are necessary to drive the phase change for thicker flakes. We also show evidence of electrochemical activity during the gating process by observation of Te metal deposition. This finding suggests the formation of Te vacancies which have been reported to lower the energy difference between the 2H and 1T' phase, potentially aiding the phase change process. Our discovery that the phase change can be achieved on the surface layer of bulk materials reveals that this electrochemical mechanism does not require isolation of a single layer and the effect may be more broadly applicable than previously thought.
△ Less
Submitted 29 May, 2019;
originally announced May 2019.
-
Quantifying the search for solid Li-ion electrolyte materials by anion: a data-driven perspective
Authors:
Austin D. Sendek,
Gowoon Cheon,
Mauro Pasta,
Evan J. Reed
Abstract:
We compile data and machine learned models of solid Li-ion electrolyte performance to assess the state of materials discovery efforts and build new insights for future efforts. Candidate electrolyte materials must satisfy several requirements, chief among them fast ionic conductivity and robust electrochemical stability. Considering these two requirements, we find new evidence to suggest that opti…
▽ More
We compile data and machine learned models of solid Li-ion electrolyte performance to assess the state of materials discovery efforts and build new insights for future efforts. Candidate electrolyte materials must satisfy several requirements, chief among them fast ionic conductivity and robust electrochemical stability. Considering these two requirements, we find new evidence to suggest that optimization of the sulfides for fast ionic conductivity and wide electrochemical stability may be more likely than optimization of the oxides, and that the oft-overlooked chlorides and bromides may be particularly promising families for Li-ion electrolytes. We also find that the nitrides and phosphides appear to be the most promising material families for electrolytes stable against Li-metal anodes. Furthermore, the spread of the existing data in performance space suggests that fast conducting materials that are stable against both Li metal and a >4V cathode are exceedingly rare, and that a multiple-electrolyte architecture is a more likely path to successfully realizing a solid-state Li metal battery by approximately an order of magnitude or more. Our model is validated by its reproduction of well-known trends that have emerged from the limited existing data in recent years, namely that the electronegativity of the lattice anion correlates with ionic conductivity and electrochemical stability. In this work, we leverage the existing data to make solid electrolyte performance trends quantitative for the first time, building a roadmap to complement material discovery efforts around desired material performance.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
Low Resistivity and High Breakdown Current Density of 10-nm Diameter van der Waals TaSe3 Nanowires by Chemical Vapor Deposition
Authors:
Thomas A. Empante,
Aimee Martinez,
Michelle Wurch,
Yanbing Zhu,
Adane K. Geremew,
Koichi Yamaguchi,
Miguel Isarraraz,
Sergey Rumyantsev,
Evan J. Reed,
Alexander A. Balandin,
Ludwig Bartels
Abstract:
Micron-scale single-crystal nanowires of metallic TaSe3, a material that forms -Ta-Se3-Ta-Se3- stacks separated from one another by a tubular van der Waals (vdW) gap, have been synthesized using chemical vapor deposition (CVD) on a SiO2/Si substrate, in a process compatible with semiconductor industry requirements. Their electrical resistivity was found unaffected by downscaling from the bulk to a…
▽ More
Micron-scale single-crystal nanowires of metallic TaSe3, a material that forms -Ta-Se3-Ta-Se3- stacks separated from one another by a tubular van der Waals (vdW) gap, have been synthesized using chemical vapor deposition (CVD) on a SiO2/Si substrate, in a process compatible with semiconductor industry requirements. Their electrical resistivity was found unaffected by downscaling from the bulk to as little as 7 nm in width and height, in striking contrast to the resistivity of copper for the same dimensions. While the bulk resistivity of TaSe3 is substantially higher than that of bulk copper, at the nanometer scale the TaSe3 wires become competitive to similar-sized copper ones. Moreover, we find that the vdW TaSe3 nanowires sustain current densities in excess of 108 A/cm2 and feature an electromigration energy barrier twice that of copper. The results highlight the promise of quasi-one-dimensional transition metal trichalcogenides for electronic interconnect applications and the potential of van der Waals materials for downscaled electronics.
△ Less
Submitted 14 March, 2019;
originally announced March 2019.
-
Machine learning-assisted discovery of many new solid Li-ion conducting materials
Authors:
Austin D. Sendek,
Ekin D. Cubuk,
Evan R. Antoniuk,
Gowoon Cheon,
Yi Cui,
Evan J. Reed
Abstract:
We discover many new crystalline solid materials with fast single crystal Li ion conductivity at room temperature, discovered through density functional theory simulations guided by machine learning-based methods. The discovery of new solid Li superionic conductors is of critical importance to the development of safe all-solid-state Li-ion batteries. With a predictive universal structure-property…
▽ More
We discover many new crystalline solid materials with fast single crystal Li ion conductivity at room temperature, discovered through density functional theory simulations guided by machine learning-based methods. The discovery of new solid Li superionic conductors is of critical importance to the development of safe all-solid-state Li-ion batteries. With a predictive universal structure-property relationship for fast ion conduction not well understood, the search for new solid Li ion conductors has relied largely on trial-and-error computational and experimental searches over the last several decades. In this work, we perform a guided search of materials space with a machine learning (ML)-based prediction model for material selection and density functional theory molecular dynamics (DFT-MD) simulations for calculating ionic conductivity. These materials are screened from over 12,000 experimentally synthesized and characterized candidates with very diverse structures and compositions. When compared to a random search of materials space, we find that the ML-guided search is 2.7 times more likely to identify fast Li ion conductors, with at least a 45x improvement in the log-average of room temperature Li ion conductivity. The F1 score of the ML-based model is 0.50, 3.5 times better than the F1 score expected from completely random guesswork. In a head-to-head competition against six Ph.D. students working in the field, we find that the ML-based model doubles the F1 score of human experts in its ability to identify fast Li-ion conductors from atomistic structure with a thousand- fold increase in speed, clearly demonstrating the utility of this model for the research community. All conducting materials reported here lack transition metals and are predicted to exhibit low electronic conduction, high stability against oxidation, and high thermodynamic stability.
△ Less
Submitted 7 August, 2018;
originally announced August 2018.
-
Griffiths Physics in an Ultracold Bose Gas
Authors:
M. E. W. Reed,
Z. S. Smith,
Aftaab Dewan,
S. L. Rolston
Abstract:
Coupled XY model systems consisting of three-dimensional (3D) systems with disordered interlayer physics are of significant theoretical interest. We realize a set of coupled quasi-2D layers of $^{87}$Rb in the presence of disordered inter-layer coupling. This is achieved with our high bandwidth arbitrary optical lattice to obviate restrictions on the dimensionality of disorder with speckle-generat…
▽ More
Coupled XY model systems consisting of three-dimensional (3D) systems with disordered interlayer physics are of significant theoretical interest. We realize a set of coupled quasi-2D layers of $^{87}$Rb in the presence of disordered inter-layer coupling. This is achieved with our high bandwidth arbitrary optical lattice to obviate restrictions on the dimensionality of disorder with speckle-generated optical fields. We identify phase crossover regions compatible with the existence of a pair of intermediate Griffiths phases between a thermal state and the emergence of bulk 3D superfluidity.
△ Less
Submitted 16 July, 2019; v1 submitted 19 June, 2018;
originally announced June 2018.
-
Elastic properties of bulk and low-dimensional materials using Van der Waals density functional
Authors:
Kamal Choudhary,
Gowoon Cheon,
Evan Reed,
Francesca Tavazza
Abstract:
In this work, we present a high-throughput first-principles study of elastic properties of bulk and monolayer materials mainly using the vdW-DF-optB88 functional. We discuss the trends on the elastic response with respect to changes in dimensionality. We identify a relation between exfoliation energy and elastic constants for layered materials that can help to guide the search for vdW bonding in m…
▽ More
In this work, we present a high-throughput first-principles study of elastic properties of bulk and monolayer materials mainly using the vdW-DF-optB88 functional. We discuss the trends on the elastic response with respect to changes in dimensionality. We identify a relation between exfoliation energy and elastic constants for layered materials that can help to guide the search for vdW bonding in materials. We also predicted a few novel materials with auxetic behavior. The uncertainty in structural and elastic properties due to the inclusion of vdW interactions is discussed. We investigated 11,067 bulk and 257 monolayer materials. Lastly, we found that the trends in elastic constants for bulk and their monolayer counterparts can be very different. All the computational results are made publicly available at easy-to-use websites: https://www.ctcms.nist.gov/~knc6/JVASP.html and https://jarvis.nist.gov/ . Our dataset can be used to identify stiff and flexible materials for industrial applications.
△ Less
Submitted 29 June, 2018; v1 submitted 3 April, 2018;
originally announced April 2018.
-
Variable domain N-linked glycosylation and negative surface charge are key features of monoclonal ACPA: implications for B-cell selection
Authors:
Katy A. Lloyd,
Johanna Steen,
Khaled Amara,
Philip J. Titcombe,
Lena Israelsson,
Susanna L. Lundstrom,
Diana Zhou,
Roman A. Zubarev,
Evan Reed,
Luca Piccoli,
Cem Gabay,
Antonio Lanzavecchia,
Dominique Baeten,
Karin Lundberg,
Daniel L. Mueller,
Lars Klareskog,
Vivianne Malmstrom,
Caroline Gronwall
Abstract:
Autoreactive B cells have a central role in the pathogenesis of rheumatoid arthritis (RA), and recent findings have proposed that anti-citrullinated protein autoantibodies (ACPA) may be directly pathogenic. Herein, we demonstrate the frequency of variable-region glycosylation in single-cell cloned mAbs. A total of 14 ACPA mAbs were evaluated for predicted N-linked glycosylation motifs in silico an…
▽ More
Autoreactive B cells have a central role in the pathogenesis of rheumatoid arthritis (RA), and recent findings have proposed that anti-citrullinated protein autoantibodies (ACPA) may be directly pathogenic. Herein, we demonstrate the frequency of variable-region glycosylation in single-cell cloned mAbs. A total of 14 ACPA mAbs were evaluated for predicted N-linked glycosylation motifs in silico and compared to 452 highly-mutated mAbs from RA patients and controls. Variable region N-linked motifs (N-X-S/T) were strikingly prevalent within ACPA (100%) compared to somatically hypermutated (SHM) RA bone marrow plasma cells (21%), and synovial plasma cells from seropositive (39%) and seronegative RA (7%). When normalized for SHM, ACPA still had significantly higher frequency of N-linked motifs compared to all studied mAbs including highly-mutated HIV broadly-neutralizing and malaria-associated mAbs. The Fab glycans of ACPA-mAbs were highly sialylated, contributed to altered charge, but did not influence antigen binding. The analysis revealed evidence of unusual B-cell selection pressure and SHM-mediated decreased in surface charge and isoelectric point in ACPA. It is still unknown how these distinct features of anti-citrulline immunity may have an impact on pathogenesis. However, it is evident that they offer selective advantages for ACPA+ B cells, possibly also through non-antigen driven mechanisms.
△ Less
Submitted 28 February, 2018;
originally announced February 2018.
-
Modeling of the Latent Embedding of Music using Deep Neural Network
Authors:
Zhou Xing,
Eddy Baik,
Yan Jiao,
Nilesh Kulkarni,
Chris Li,
Gautam Muralidhar,
Marzieh Parandehgheibi,
Erik Reed,
Abhishek Singhal,
Fei Xiao,
Chris Pouliot
Abstract:
While both the data volume and heterogeneity of the digital music content is huge, it has become increasingly important and convenient to build a recommendation or search system to facilitate surfacing these content to the user or consumer community. Most of the recommendation models fall into two primary species, collaborative filtering based and content based approaches. Variants of instantiatio…
▽ More
While both the data volume and heterogeneity of the digital music content is huge, it has become increasingly important and convenient to build a recommendation or search system to facilitate surfacing these content to the user or consumer community. Most of the recommendation models fall into two primary species, collaborative filtering based and content based approaches. Variants of instantiations of collaborative filtering approach suffer from the common issues of so called "cold start" and "long tail" problems where there is not much user interaction data to reveal user opinions or affinities on the content and also the distortion towards the popular content. Content-based approaches are sometimes limited by the richness of the available content data resulting in a heavily biased and coarse recommendation result. In recent years, the deep neural network has enjoyed a great success in large-scale image and video recognitions. In this paper, we propose and experiment using deep convolutional neural network to imitate how human brain processes hierarchical structures in the auditory signals, such as music, speech, etc., at various timescales. This approach can be used to discover the latent factor models of the music based upon acoustic hyper-images that are extracted from the raw audio waves of music. These latent embeddings can be used either as features to feed to subsequent models, such as collaborative filtering, or to build similarity metrics between songs, or to classify music based on the labels for training such as genre, mood, sentiment, etc.
△ Less
Submitted 11 May, 2017;
originally announced May 2017.
-
Testbeds for Transition Metal Dichalcogenide Photonics: Efficacy of Light Emission Enhancement in Monomer vs. Dimer Nanoscale Antennae
Authors:
Mohammad H. Tahersima,
M. Danang Birowosuto,
Zhizhen Ma,
Ibrahim Sarpkaya,
William C. Coley,
Michael D. Valentin,
I-Hsi Lu,
Ke Liu,
Yao Zhou,
Aimee Martinez,
Ingrid Liao,
Brandon N. Davis,
Joseph Martinez,
Sahar Naghibi Alvillar,
Dominic Martinez-Ta,
Alison Guan,
Ariana E. Nguyen,
Cesare Soci,
Evan Reed,
Ludwig Bartels,
Volker J. Sorger
Abstract:
Monolayer transition metal dichalcogenides are uniquely-qualified materials for photonics because they combine well defined tunable direct band gaps and selfpassivated surfaces without dangling bonds. However, the atomic thickness of these 2D materials results in low photo absorption limiting the achievable photo luminescence intensity. Such emission can, in principle, be enhanced via nanoscale an…
▽ More
Monolayer transition metal dichalcogenides are uniquely-qualified materials for photonics because they combine well defined tunable direct band gaps and selfpassivated surfaces without dangling bonds. However, the atomic thickness of these 2D materials results in low photo absorption limiting the achievable photo luminescence intensity. Such emission can, in principle, be enhanced via nanoscale antennae resulting in; a. an increased absorption cross-section enhancing pump efficiency, b. an acceleration of the internal emission rate via the Purcell factor mainly by reducing the antennas optical mode volume beyond the diffraction limit, and c. improved impedance matching of the emitter dipole to the freespace wavelength. Plasmonic dimer antennae show orders of magnitude hot-spot field enhancements when an emitter is positioned exactly at the midgap. However, a 2D material cannot be grown, or easily transferred, to reside in mid-gap of the metallic dimer cavity. In addition, a spacer layer between the cavity and the emissive material is required to avoid non-radiative recombination channels. Using both computational and experimental methods, in this work we show that the emission enhancement from a 2D emitter- monomer antenna cavity system rivals that of dimers at much reduced lithographic effort. We rationalize this finding by showing that the emission enhancement in dimer antennae does not specifically originate from the gap of the dimer cavity, but is an average effect originating from the effective cavity crosssection taken below each optical cavity where the emitting 2D film is located. In particular, we test an array of different dimer and monomer antenna geometries and observe a representative 3x higher emission for both monomer and dimer cavities as compared to intrinsic emission of Chemical Vapor Deposition synthesized WS2 flakes.
△ Less
Submitted 26 February, 2017;
originally announced February 2017.
-
A Review on Mechanics and Mechanical Properties of 2D Materials - Graphene and Beyond
Authors:
Deji Akinwande,
Christopher J. Brennan,
J. Scott Bunch,
Philip Egberts,
Jonathan R. Felts,
Huajian Gao,
Rui Huang,
Joon-Seok Kim,
Teng Li,
Yao Li,
Kenneth M. Liechti,
Nanshu Lu,
Harold S. Park,
Evan J. Reed,
Peng Wang,
Boris I. Yakobson,
Teng Zhang,
Yong-Wei Zhang,
Yao Zhou,
Yong Zhu
Abstract:
Since the first successful synthesis of graphene just over a decade ago, a variety of two-dimensional (2D) materials (e.g., transition metal-dichalcogenides, hexagonal boron-nitride, etc.) have been discovered. Among the many unique and attractive properties of 2D materials, mechanical properties play important roles in manufacturing, integration and performance for their potential applications. M…
▽ More
Since the first successful synthesis of graphene just over a decade ago, a variety of two-dimensional (2D) materials (e.g., transition metal-dichalcogenides, hexagonal boron-nitride, etc.) have been discovered. Among the many unique and attractive properties of 2D materials, mechanical properties play important roles in manufacturing, integration and performance for their potential applications. Mechanics is indispensable in the study of mechanical properties, both experimentally and theoretically. The coupling between the mechanical and other physical properties (thermal, electronic, optical) is also of great interest in exploring novel applications, where mechanics has to be combined with condensed matter physics to establish a scalable theoretical framework. Moreover, mechanical interactions between 2D materials and various substrate materials are essential for integrated device applications of 2D materials, for which the mechanics of interfaces (adhesion and friction) has to be developed for the 2D materials. Here we review recent theoretical and experimental works related to mechanics and mechanical properties of 2D materials. While graphene is the most studied 2D material to date, we expect continual growth of interest in the mechanics of other 2D materials beyond graphene.
△ Less
Submitted 4 November, 2016;
originally announced November 2016.
-
Structural Semiconductor-to-Semimetal Phase Transition in Two-Dimensional Materials Induced by Electrostatic Gating
Authors:
Yao Li,
Karel-Alexander N. Duerloo,
Kerry Wauson,
Evan J. Reed
Abstract:
Dynamic control of conductivity and optical properties via atomic structure changes is of tremendous technological importance in information storage. Energy consumption considerations provide a driving force toward employing thin materials in devices. Monolayer transition metal dichalcogenides are nearly atomically-thin materials that can exist in multiple crystal structures, each with distinct el…
▽ More
Dynamic control of conductivity and optical properties via atomic structure changes is of tremendous technological importance in information storage. Energy consumption considerations provide a driving force toward employing thin materials in devices. Monolayer transition metal dichalcogenides are nearly atomically-thin materials that can exist in multiple crystal structures, each with distinct electrical properties. Using density functional approaches, we discover that electrostatic gating device configurations have the potential to drive structural semiconductor-to-semimetal phase transitions in some monolayer transition metal dichalcogenides. For the first time, we show that the dynamical control of this phase transition can be achieved in carefully designed electronic devices. We discover that the semiconductor-to-semimetal phase transition in monolayer MoTe2 can be driven by a gate voltage of several Volts with appropriate choice of dielectric. Structural transitions in monolayer TaSe2 are predicted to occur under similar conditions. While the required field magnitudes are large for these two materials, we find that the gate voltage for the transition can be reduced arbitrarily by alloying, e.g. for MoxW1-xTe2 monolayers. We have developed a method for computing phase diagrams of monolayer materials with respect to charge and voltage, validated by comparing to direct calculations and experimental measurements. Our findings identify a new physical mechanism, not existing in bulk materials, to dynamically control structural phase transitions in two-dimensional materials, enabling potential applications in phase-change electronic devices.
△ Less
Submitted 15 January, 2016;
originally announced January 2016.
-
Disorder-Driven Loss of Phase Coherence in a Quasi-2D Cold Atom System
Authors:
M. C. Beeler,
M. E. W. Reed,
T. Hong,
S. L. Rolston
Abstract:
We study the order parameter of a quasi-2D gas of ultracold atoms trapped in an optical potential in the presence of controllable disorder. Our results show that disorder drives phase fluctuations without significantly affecting the amplitude of the quasi-condensate order parameter. This is evidence that disorder can drive phase fluctuations in 2D systems, relevant to the phase-fluctuation mechani…
▽ More
We study the order parameter of a quasi-2D gas of ultracold atoms trapped in an optical potential in the presence of controllable disorder. Our results show that disorder drives phase fluctuations without significantly affecting the amplitude of the quasi-condensate order parameter. This is evidence that disorder can drive phase fluctuations in 2D systems, relevant to the phase-fluctuation mechanism for the superconductor-to-insulator phase transition (SIT) in disordered 2D superconductors.
△ Less
Submitted 22 March, 2012; v1 submitted 5 November, 2011;
originally announced November 2011.
-
On many-server queues in heavy traffic
Authors:
Anatolii A. Puhalskii,
Josh E. Reed
Abstract:
We establish a heavy-traffic limit theorem on convergence in distribution for the number of customers in a many-server queue when the number of servers tends to infinity. No critical loading condition is assumed. Generally, the limit process does not have trajectories in the Skorohod space. We give conditions for the convergence to hold in the topology of compact convergence. Some new results fo…
▽ More
We establish a heavy-traffic limit theorem on convergence in distribution for the number of customers in a many-server queue when the number of servers tends to infinity. No critical loading condition is assumed. Generally, the limit process does not have trajectories in the Skorohod space. We give conditions for the convergence to hold in the topology of compact convergence. Some new results for an infinite server are also provided.
△ Less
Submitted 13 January, 2010;
originally announced January 2010.