-
Simulations and Performance Studies of a MAPS in 65 nm CMOS Imaging Technology
Authors:
Adriana Simancas,
Justus Braach,
Eric Buschmann,
Ankur Chauhan,
Dominik Dannheim,
Manuel Del Rio Viera,
Katharina Dort,
Doris Eckstein,
Finn Feindt,
Ingrid-Maria Gregor,
Karsten Hansen,
Lennart Huth,
Larissa Mendes,
Budi Mulyanto,
Daniil Rastorguev,
Christian Reckleben,
Sara Ruiz Daza,
Judith Schlaadt,
Paul Schütze,
Walter Snoeys,
Simon Spannagel,
Marcel Stanitzki,
Anastasiia Velyka,
Gianpiero Vignola,
Håkan Wennlöf
Abstract:
Monolithic active pixel sensors (MAPS) produced in a 65 nm CMOS imaging technology are being investigated for applications in particle physics. The MAPS design has a small collection electrode characterized by an input capacitance of ~fF, granting a high signal-to-noise ratio and low power consumption. Additionally, the 65 nm CMOS imaging technology brings a reduction in material budget and improv…
▽ More
Monolithic active pixel sensors (MAPS) produced in a 65 nm CMOS imaging technology are being investigated for applications in particle physics. The MAPS design has a small collection electrode characterized by an input capacitance of ~fF, granting a high signal-to-noise ratio and low power consumption. Additionally, the 65 nm CMOS imaging technology brings a reduction in material budget and improved logic density of the readout circuitry, compared to previously studied technologies. Given these features, this technology was chosen by the TANGERINE project to develop the next generation of silicon pixel sensors. The sensor design targets temporal and spatial resolutions compatible with the requirements for a vertex detector at future lepton colliders. Simulations and test-beam characterization of technology demonstrators have been carried out in close collaboration with the CERN EP R&D program and the ALICE ITS3 upgrade. TCAD device simulations using generic do** profiles and Monte Carlo simulations have been used to build an understanding of the technology and predict the performance parameters of the sensor. Technology demonstrators of a 65 nm CMOS MAPS with a small collection electrode have been characterized in laboratory and test-beam facilities by studying performance parameters such as cluster size, charge collection, and efficiency. This work compares simulation results to test-beam data. The experimental results establish this technology as a promising candidate for a vertex detector at future lepton colliders and give valuable information for improving the simulation approach.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Develo** a Monolithic Silicon Sensor in a 65 nm CMOS Imaging Technology for Future Lepton Collider Vertex Detectors
Authors:
Adriana Simancas,
Justus Braach,
Eric Buschmann,
Ankur Chauhan,
Dominik Dannheim,
Manuel Del Rio Viera,
Katharina Dort,
Doris Eckstein,
Finn Feindt,
Ingrid-Maria Gregor,
Karsten Hansen,
Lennart Huth,
Larissa Mendes,
Budi Mulyanto,
Daniil Rastorguev,
Christian Reckleben,
Sara Ruiz Daza,
Paul Schütze,
Walter Snoeys,
Simon Spannagel,
Marcel Stanitzki,
Anastasiia Velyka,
Gianpiero Vignola,
Håkan Wennlöf
Abstract:
Monolithic CMOS sensors in a 65 nm imaging technology are being investigated by the CERN EP Strategic R&D Programme on Technologies for Future Experiments for an application in particle physics. The appeal of monolithic detectors lies in the fact that both sensor volume and readout electronics are integrated in the same silicon wafer, providing a reduction in production effort, costs and scatterin…
▽ More
Monolithic CMOS sensors in a 65 nm imaging technology are being investigated by the CERN EP Strategic R&D Programme on Technologies for Future Experiments for an application in particle physics. The appeal of monolithic detectors lies in the fact that both sensor volume and readout electronics are integrated in the same silicon wafer, providing a reduction in production effort, costs and scattering material. The Tangerine Project WP1 at DESY participates in the Strategic R&D Programme and is focused on the development of a monolithic active pixel sensor with a time and spatial resolution compatible with the requirements for a future lepton collider vertex detector. By fulfilling these requirements, the Tangerine detector is suitable as well to be used as telescope planes for the DESY-II Test Beam facility. The project comprises all aspects of sensor development, from the electronics engineering and the sensor design using simulations, to laboratory and test beam investigations of prototypes. Generic TCAD Device and Monte-Carlo simulations are used to establish an understanding of the technology and provide important insight into performance parameters of the sensor. Testing prototypes in laboratory and test beam facilities allows for the characterization of their response to different conditions. By combining results from all these studies it is possible to optimize the sensor layout. This contribution presents results from generic TCAD and Monte-Carlo simulations, and measurements performed with test chips of the first sensor submission.
△ Less
Submitted 31 March, 2023;
originally announced March 2023.
-
Towards a New Generation of Monolithic Active Pixel Sensors
Authors:
Ankur Chauhan,
Manuel Del Rio Viera,
Doris Eckstein,
Finn Feindt,
Ingrid-Maria Gregor,
Karsten Hansen,
Lennart Huth,
Larissa Mendes,
Budi Mulyanto,
Daniil Rastorguev,
Christian Reckleben,
Sara Ruiz Daza,
Paul Schütze,
Adriana Simancas,
Simon Spannagel,
Marcel Stanitzki,
Anastasiia Velyka,
Gianpiero Vignola,
Håkan Wennlöf
Abstract:
A new generation of Monolithic Active Pixel Sensors (MAPS), produced in a 65 nm CMOS imaging process, promises higher densities of on-chip circuits and, for a given pixel size, more sophisticated in-pixel logic compared to larger feature size processes. MAPS are a cost-effective alternative to hybrid pixel sensors since flip-chip bonding is not required. In addition, they allow for significant red…
▽ More
A new generation of Monolithic Active Pixel Sensors (MAPS), produced in a 65 nm CMOS imaging process, promises higher densities of on-chip circuits and, for a given pixel size, more sophisticated in-pixel logic compared to larger feature size processes. MAPS are a cost-effective alternative to hybrid pixel sensors since flip-chip bonding is not required. In addition, they allow for significant reductions of the material budget of detector systems, due to the smaller physical thicknesses of the active sensor and the absence of a separate readout chip. The TANGERINE project develops a sensor suitable for future Higgs factories as well as for a beam telescope to be used at beam-test facilities. The sensors will have small collection electrodes (order of $μ$m) to maximize the signal-to-noise ratio, which makes it possible to minimize power dissipation in the circuitry. The first batch of test chips, featuring full front-end amplifiers with Krummenacher feedback, was produced and tested at the Mainzer Mikrotron (MAMI) at the end of 2021. MAMI provides an electron beam with currents up to 100 $μ$A and an energy of 855 MeV. The analog output signal of the test chips was recorded with a high bandwidth oscilloscope and used to study the charge-sensitive amplifier of the chips in terms of waveform analysis. A beam telescope was used as a reference system to allow for track-based analysis of the recorded data.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
The Tangerine project: Development of high-resolution 65 nm silicon MAPS
Authors:
Håkan Wennlöf,
Ankur Chauhan,
Manuel Del Rio Viera,
Doris Eckstein,
Finn Feindt,
Ingrid-Maria Gregor,
Karsten Hansen,
Lennart Huth,
Larissa Mendes,
Budi Mulyanto,
Daniil Rastorguev,
Christian Reckleben,
Sara Ruiz Daza,
Paul Schütze,
Adriana Simancas,
Simon Spannagel,
Marcel Stanitzki,
Anastasiia Velyka,
Gianpiero Vignola
Abstract:
The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of develo** a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced…
▽ More
The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of develo** a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced power consumption and material budget compared to other processes. The process is envisioned to be used in for example the next ALICE inner tracker upgrade, and in experiments at the electron-ion collider.
The initial goal of the three-year Tangerine project is to develop and test a sensor in a 65 nm CMOS imaging process that can be used in test beam telescopes at DESY, providing excellent spatial resolution and high time resolution, and thus demonstrating the capabilities of the process. The project covers all aspects of sensor R&D, from electronics and sensor design using simulations, to prototype test chip characterisation in labs and at test beams. The sensor design simulations are performed by using a powerful combination of detailed electric field simulations using technology computer-aided design and high-statistics Monte Carlo simulations using the Allpix Squared framework. A first prototype test chip in the process has been designed and produced, and successfully operated and tested both in labs and at test beams.
△ Less
Submitted 11 June, 2022;
originally announced June 2022.
-
First functionality tests of a 64 x 64 pixel DSSC sensor module connected to the complete ladder readout
Authors:
Mattia Donato,
Karsten Hansen,
Pradeep Kalavakuru,
Manfred Kirchgessner,
Markus Kuster,
Matteo Porro,
Christian Reckleben,
Monica Turcato
Abstract:
The European X-ray Free Electron Laser (XFEL.EU) will provide every 0.1 s a train of 2700 spatially coherent ultrashort X-ray pulses at 4.5 MHz repetition rate. The Small Quantum Systems (SQS) instrument and the Spectroscopy and Coherent Scattering instrument (SCS) operate with soft X-rays between 0.5 keV - 6keV. The DEPFET Sensor with Signal Compression (DSSC) detector is being developed to meet…
▽ More
The European X-ray Free Electron Laser (XFEL.EU) will provide every 0.1 s a train of 2700 spatially coherent ultrashort X-ray pulses at 4.5 MHz repetition rate. The Small Quantum Systems (SQS) instrument and the Spectroscopy and Coherent Scattering instrument (SCS) operate with soft X-rays between 0.5 keV - 6keV. The DEPFET Sensor with Signal Compression (DSSC) detector is being developed to meet the requirements set by these two XFEL.EU instruments. The DSSC imager is a 1 mega-pixel camera able to store up to 800 single-pulse images per train. The so-called ladder is the basic unit of the DSSC detector. It is the single unit out of sixteen identical-units composing the DSSC-megapixel camera, containing all representative electronic components of the full-size system and allows testing the full electronic chain. Each DSSC ladder has a focal plane sensor with 128 x 512 pixels. The read-out ASIC provides full-parallel readout of the sensor pixels. Every read-out channel contains an amplifier and an analog filter, an up-to 9 bit ADC and the digital memory. The ASIC amplifier have a double front-end to allow one to use either DEPFET sensors or Mini-SDD sensors. In the first case, the signal compression is a characteristic intrinsic of the sensor; in the second case, the compression is implemented at the first amplification stage. The goal of signal compression is to meet the requirement of single-photon detection capability and wide dynamic range. We present the first results of measurements obtained using a 64 x 64 pixel DEPFET sensor attached to the full final electronic and data-acquisition chain.
△ Less
Submitted 13 January, 2017;
originally announced January 2017.
