Showing 1–9 of 9 results for author: Read, J C

Empirical research methods for human-computer interaction

Authors: I. Scott MacKenzie, Janet C. Read, Matthew Horton

Abstract: Most attendees at CHI conferences will agree that an experiment (user study) is the hallmark of good research in human-computer interaction. But what constitutes an experiment? And how does one go from an experiment to a CHI paper? This course will teach how to pose testable research questions, how to make and measure observations, and how to design and conduct an experiment. Specifically, attende… ▽ More Most attendees at CHI conferences will agree that an experiment (user study) is the hallmark of good research in human-computer interaction. But what constitutes an experiment? And how does one go from an experiment to a CHI paper? This course will teach how to pose testable research questions, how to make and measure observations, and how to design and conduct an experiment. Specifically, attendees will participate in a real experiment to gain experience as both an investigator and as a participant. The second session covers the statistical tools typically used to analyze data. Most notably, attendees will learn how to organize experiment results and write a CHI paper. △ Less

Submitted 20 April, 2024; originally announced April 2024.

Comments: 3 pages, 6 figures

Interface controlled thermal properties of ultra-thin chalcogenide-based phase change memory devices

Authors: Kiumars Aryana, John T. Gaskins, Joyeeta Nag, Derek A. Stewart, Zhaoqiang Bai, Saikat Mukhopadhyay, John C. Read, David H. Olson, Eric R. Hoglund, James M. Howe, Ashutosh Giri, Michael K. Grobis, Patrick E. Hopkins

Abstract: Phase change memory (PCM) is a rapidly growing technology that not only offers advancements in storage-class memories but also enables in-memory data storage and processing towards overcoming the von Neumann bottleneck. In PCMs, the primary mechanism for data storage is thermal excitation. However, there is a limited body of research regarding the thermal properties of PCMs at length scales close… ▽ More Phase change memory (PCM) is a rapidly growing technology that not only offers advancements in storage-class memories but also enables in-memory data storage and processing towards overcoming the von Neumann bottleneck. In PCMs, the primary mechanism for data storage is thermal excitation. However, there is a limited body of research regarding the thermal properties of PCMs at length scales close to the memory cell dimension and, thus, the impact of interfaces on PCM operation is unknown. Our work presents a new paradigm to manage thermal transport in memory cells by manipulating the interfacial thermal resistance between the phase change unit and the electrodes without incorporating additional insulating layers. Experimental measurements show a substantial change in thermal boundary resistance as GST transitions from one crystallographic structure (cubic) to another (hexagonal) and as the thickness of tungsten contacts is reduced from five to two nanometers. Simulations reveal that interfacial resistance between the phase change unit and its adjacent layer can reduce the reset current for 20 and 120 nm diameter devices by up to ~40% and ~50%, respectively. The resultant phase-dependent and geometric effects on thermal boundary resistance dictate that the effective thermal conductivity of the phase change unit can be reduced by a factor of four, presenting a new opportunity to reduce operating currents in PCMs. △ Less

Submitted 10 November, 2020; originally announced November 2020.

Report number: Nature Communications 12, 774 (2021)

A single coordinate framework for optic flow and binocular disparity

Authors: Andrew Glennerster, Jenny C. A. Read

Abstract: Optic flow is two dimensional, but no special qualities are attached to one or other of these dimensions. For binocular disparity, on the other hand, the terms 'horizontal' and 'vertical' disparities are commonly used. This is odd, since binocular disparity and optic flow describe essentially the same thing. The difference is that, generally, people tend to fixate relatively close to the direction… ▽ More Optic flow is two dimensional, but no special qualities are attached to one or other of these dimensions. For binocular disparity, on the other hand, the terms 'horizontal' and 'vertical' disparities are commonly used. This is odd, since binocular disparity and optic flow describe essentially the same thing. The difference is that, generally, people tend to fixate relatively close to the direction of heading as they move, meaning that fixation is close to the optic flow epipole, whereas, for binocular vision, fixation is close to the head-centric midline, i.e. approximately 90 degrees from the binocular epipole. For fixating animals, some separations of flow may lead to simple algorithms for the judgement of surface structure and the control of action. We consider the following canonical flow patterns that sum to produce overall flow: (i) 'towards' flow, the component of translational flow produced by approaching (or retreating from) the fixated object, which produces pure radial flow on the retina; (ii) 'sideways' flow, the remaining component of translational flow, which is produced by translation of the optic centre orthogonal to the cyclopean line of sight and (iii) 'vergence' flow, rotational flow produced by a counter-rotation of the eye in order to maintain fixation. A general flow pattern could also include (iv) 'cyclovergence' flow, produced by rotation of one eye relative to the other about the line of sight. We consider some practical advantages of dividing up flow in this way when an observer fixates as they move. As in some previous treatments, we suggest that there are certain tasks for which it is sensible to consider 'towards' flow as one component and 'sideways' + 'vergence' flow as another. △ Less

Submitted 11 August, 2018; originally announced August 2018.

Comments: 65 pages; 17 figures

X-ray photoemission study of CoFeB/MgO thin film bi-layers

Authors: J. C. Read, P. G. Mather, R. A. Buhrman

Abstract: We present results from an X-ray photoemission spectroscopy (XPS) study of CoFeB/MgO bi-layers where we observe process-dependent formation of B, Fe, and Co oxides at the CoFeB/MgO interface due to oxidation of CoFeB during MgO deposition. Vacuum annealing reduces the Co and Fe oxides but further incorporates B into the MgO forming a composite MgBxOy layer. Inserting an Mg layer between CoFeB an… ▽ More We present results from an X-ray photoemission spectroscopy (XPS) study of CoFeB/MgO bi-layers where we observe process-dependent formation of B, Fe, and Co oxides at the CoFeB/MgO interface due to oxidation of CoFeB during MgO deposition. Vacuum annealing reduces the Co and Fe oxides but further incorporates B into the MgO forming a composite MgBxOy layer. Inserting an Mg layer between CoFeB and MgO introduces an oxygen sink, providing increased control over B content in the barrier. △ Less

Submitted 9 February, 2007; originally announced February 2007.

Comments: 13 pages, 3 figures

Disorder, defects and bandgaps in ultra thin (001) MgO tunnel barrier layers

Authors: P. G. Mather, J. C. Read, R. A. Buhrman

Abstract: We report scanning tunneling spectroscopy studies of the electronic structure of 1.5 to 3 nm (001) textured MgO layers grown on (001) Fe. Thick MgO layers exhibit a bulk-like band gap, approximately 5-7 eV, and sparse, localized defect states with characteristics attributable to oxygen and, in some cases, Mg vacancies. Thin MgO layers exhibit electronic structure indicative of interacting defect… ▽ More We report scanning tunneling spectroscopy studies of the electronic structure of 1.5 to 3 nm (001) textured MgO layers grown on (001) Fe. Thick MgO layers exhibit a bulk-like band gap, approximately 5-7 eV, and sparse, localized defect states with characteristics attributable to oxygen and, in some cases, Mg vacancies. Thin MgO layers exhibit electronic structure indicative of interacting defect states forming band tails which in the thinnest case extend to approximately 0.5 V of the Fermi level. These vacancy defects are ascribed to compressive strain from the MgO/Fe lattice mismatch, accommodated as the MgO grows. △ Less

Submitted 27 March, 2006; originally announced March 2006.

Tunneling spectroscopy studies of aluminum oxide tunnel barrier layers

Authors: P. G. Mather, A. C. Perrella, E. Tan, J. C. Read, R. A. Buhrman

Abstract: We report scanning tunneling microscopy and ballistic electron emission microscopy studies of the electronic states of the uncovered and chemisorbed-oxygen covered surface of AlOx tunnel barrier layers. These states change when chemisorbed oxygen ions are moved into the oxide by either flood gun electron bombardment or by thermal annealing. The former, if sufficiently energetic, results in local… ▽ More We report scanning tunneling microscopy and ballistic electron emission microscopy studies of the electronic states of the uncovered and chemisorbed-oxygen covered surface of AlOx tunnel barrier layers. These states change when chemisorbed oxygen ions are moved into the oxide by either flood gun electron bombardment or by thermal annealing. The former, if sufficiently energetic, results in locally well defined conduction band onsets at ~1 V, while the latter results in a progressively higher local conduction band onset, exceeding 2.3 V for 500 and 600 C thermal anneals. △ Less

Submitted 19 March, 2005; originally announced March 2005.

Oxygen stoichiometry and instability in aluminium oxide tunnel barrier layers

Authors: E. Tan, P. G. Mather, A. C. Perrella, J. C. Read, R. A. Buhrman

Abstract: We present X-ray photoelectron spectroscopy data which show that the chemisorbed oxygen previously observed to be on the surface of thin AlOx layers formed by room temperature thermal oxidation is bound by oxygen vacancies in the oxide. Increasing the electric field across the oxide, either by over-coating with a metallic electrode, or by electron bombardment, drives this surface chemisorbed oxy… ▽ More We present X-ray photoelectron spectroscopy data which show that the chemisorbed oxygen previously observed to be on the surface of thin AlOx layers formed by room temperature thermal oxidation is bound by oxygen vacancies in the oxide. Increasing the electric field across the oxide, either by over-coating with a metallic electrode, or by electron bombardment, drives this surface chemisorbed oxygen into the vacancy sites. Due to the low bonding energies of these oxygen sites, subsequent oxygen exposures draw these ions back to the surface, reforming chemisorbed O$_2^-$. Al/AlOx/Al tunnel junctions incorporating electron bombarded AlOx barriers show a significant reduction in the low frequency junction resistance noise level at 4.2 K. △ Less

Submitted 23 February, 2005; v1 submitted 14 January, 2005; originally announced January 2005.

Stability of Power-Law Disks II -- The Global Spiral Modes

Authors: N. W. Evans, J. C. A. Read

Abstract: This paper reports on the in-plane normal modes in the self-consistent and the cut-out power-law disks. Although the cut-out disks are remarkably stable to bisymmetric perturbations, they are very susceptible to one-armed modes. For this harmonic, there is no inner Lindblad resonance, thus removing a powerful stabilising influence. A physical mechanism for the generation of the one-armed instabi… ▽ More This paper reports on the in-plane normal modes in the self-consistent and the cut-out power-law disks. Although the cut-out disks are remarkably stable to bisymmetric perturbations, they are very susceptible to one-armed modes. For this harmonic, there is no inner Lindblad resonance, thus removing a powerful stabilising influence. A physical mechanism for the generation of the one-armed instabilities is put forward. Incoming trailing waves are reflected as leading waves at the inner cut-out, thus completing the feedback for the swing-amplifier. Growing three-armed and four-armed modes occur only at very low temperatures. The rotation curve index has a marked effect on stability. For all azimuthal wavenumbers, any unstable modes persist to higher temperatures and grow more vigorously if the rotation curve is rising than if the rotation curve is falling. If the central regions or outer parts of the disk are carved out more abruptly, any instabilities become more virulent. The self-consistent power-law disks possess a number of unusual stability properties. There is no natural time-scale in the self-consistent disk. If a mode is admitted at some pattern speed and growth rate, then it must be present at all pattern speeds and growth rates. Our analysis suggests that such a two-dimensional continuum of non-axisymmetric modes does not occur and that the self-consistent power-law disks admit no global non-axisymmetric normal modes whatsoever. Without reflecting boundaries or cut-outs, there is no resonant cavity and no possibility of unstable growing modes. The self-consistent power-law disks certainly admit equiangular spirals as neutral modes, together with a one-dimensional continuum of growing axisymmetric modes. △ Less

Submitted 24 May, 1998; originally announced May 1998.

Comments: 31 pages, 32 figures, in press at Monthly Notices

Stability of Power-Law Disks I -- The Fredholm Integral Equation

Authors: N. W. Evans, J. C. A. Read

Abstract: The power-law disks are a family of infinitesimally thin, axisymmetric stellar disks of infinite extent. The rotation curve can be rising, falling or flat. The self-consistent power-law disks are scale-free, so that all physical quantities vary as a power of radius. They possess simple equilibrium distribution functions depending on the two classical integrals, energy and angular momentum. While… ▽ More The power-law disks are a family of infinitesimally thin, axisymmetric stellar disks of infinite extent. The rotation curve can be rising, falling or flat. The self-consistent power-law disks are scale-free, so that all physical quantities vary as a power of radius. They possess simple equilibrium distribution functions depending on the two classical integrals, energy and angular momentum. While maintaining the scale-free equilibrium force law, the power-law disks can be transformed into cut-out disks by preventing stars close to the origin (and sometimes also at large radii) from participating in any disturbance. This paper derives the homogeneous Fredholm integral equation for the in-plane normal modes in the self-consistent and the cut-out power-law disks. This is done by linearising the collisionless Boltzmann equation to find the response density corresponding to any imposed density and potential. The normal modes -- that is, the self-consistent modes of oscillation -- are found by requiring the imposed density to equal the response density. In practice, this scheme is implemented in Fourier space, by decomposing both imposed and response densities in logarithmic spirals. The Fredholm integral equation then relates the transform of the imposed density to the transform of the response density. Numerical strategies to solve the integral equation and to isolate the growth rates and the pattern speeds of the normal modes are discussed. △ Less

Submitted 24 May, 1998; originally announced May 1998.

Comments: 27 pages, 9 figures, in press at Monthly Notices