Showing 1–50 of 142 results for author: Raychaudhuri, A

Spectroscopic comprehension of Mott-Hubbard insulator to negative charge transfer metal transition in LaNi_{x}V_{1-x}O_{3} thin films

Authors: Anupam Jana, Sophia Sahoo, Sourav Chowdhury, Arup Kumar Mandal, R. J. Choudhary, D. M. Phase, A. K. Raychaudhuri

Abstract: The room temperature (300 K) electronic structure of pulsed laser deposited LaNi_{x}V_{1-x}O_{3} thin films have been demonstrated. The substitution of early-transition metal (TM) V in LaVO_{3} thin films with late-TM Ni leads to the decreasing in out-of-plane lattice parameter. Do** of Ni does not alter the formal valence state of Ni and V in LaNi_{x}V_{1-x}O_{3} thin films, divulging the absen… ▽ More The room temperature (300 K) electronic structure of pulsed laser deposited LaNi_{x}V_{1-x}O_{3} thin films have been demonstrated. The substitution of early-transition metal (TM) V in LaVO_{3} thin films with late-TM Ni leads to the decreasing in out-of-plane lattice parameter. Do** of Ni does not alter the formal valence state of Ni and V in LaNi_{x}V_{1-x}O_{3} thin films, divulging the absence of carrier do** into the system. The valence band spectrum is observed to comprise of incoherent structure owing to the localized V 3d band along with the coherent structure at Fermi level. With increase in Ni concentration, the weight of the coherent feature increases, which divulges its origin to the Ni 3d-O 2p hybridized band. The shift of Ni 3d-O 2p hybridized band towards higher energy in Ni doped LaVO_{3} films compared to the LaNiO_{3} film endorses the modification in ligand to metal charge transfer (CT) energy. The Ni do** in Mott-Hubbard insulator LaVO_{3} leads to the closure of Mott-Hubbard gap by building of spectral weight that provides the delocalized electrons for conduction. A transition from bandwidth control Mott-Hubbard insulator LaVO_{3} to negative CT metallicity character in LaNiO_{3} film is observed. The study reveals that unlike in Mott-Hubbard insulators where the strong Coulomb interaction between the 3d electrons decides the electronic structure of the system, CT energy can deliver an additional degree of freedom to optimize material properties in Ni doped LaVO_{3} films. △ Less

Submitted 11 June, 2021; originally announced June 2021.

Comments: 30 pages, 8 figures

Crooked Indifferentiability Revisited

Authors: Rishiraj Bhattacharyya, Mridul Nandi, Anik Raychaudhuri

Abstract: In CRYPTO 2018, Russell et al introduced the notion of crooked indifferentiability to analyze the security of a hash function when the underlying primitive is subverted. They showed that the $n$-bit to $n$-bit function implemented using enveloped XOR construction (\textsf{EXor}) with $3n+1$ many $n$-bit functions and $3n^2$-bit random initial vectors (iv) can be proven secure asymptotically in the… ▽ More In CRYPTO 2018, Russell et al introduced the notion of crooked indifferentiability to analyze the security of a hash function when the underlying primitive is subverted. They showed that the $n$-bit to $n$-bit function implemented using enveloped XOR construction (\textsf{EXor}) with $3n+1$ many $n$-bit functions and $3n^2$-bit random initial vectors (iv) can be proven secure asymptotically in the crooked indifferentiability setting. -We identify several major issues and gaps in the proof by Russel et al, We show that their proof can achieve security only when the adversary is restricted to make queries related to a single message. - We formalize new technique to prove crooked indifferentiability without such restrictions. Our technique can handle function dependent subversion. We apply our technique to provide a revised proof for the \textsf{EXor} construction. - We analyze crooked indifferentiability of the classical sponge construction. We show, using a simple proof idea, the sponge construction is a crooked-indifferentiable hash function using only $n$-bit random iv. This is a quadratic improvement over the {\sf EXor} construction and solves the main open problem of Russel et al. △ Less

Submitted 14 January, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Effective separation of photogenerated electron-hole pairs by radial field facilitates ultrahigh photoresponse in single semiconductor nanowire photodetectors

Authors: Shaili Sett, Arup Kumar Raychaudhuri

Abstract: We report an investigation on the observation of ultrahigh photoresponse (photogain, G_Pc>106) in single nanowire photodetectors of diameter < 100 nm. The investigation which is a combination of experimental observations and a theoretical analysis of the ultrahigh optical response of semiconductor nanowires, has been carried out with emphasis on Ge nanowires. Semiconductor nanowire photodetectors… ▽ More We report an investigation on the observation of ultrahigh photoresponse (photogain, G_Pc>106) in single nanowire photodetectors of diameter < 100 nm. The investigation which is a combination of experimental observations and a theoretical analysis of the ultrahigh optical response of semiconductor nanowires, has been carried out with emphasis on Ge nanowires. Semiconductor nanowire photodetectors show a signature of photogating where G_Pc rolls-off with increasing illumination intensity. We show that surface band bending due to depleted surface layers in nanowires induces a strong radial field (~ 108 V/m at the nanowire surface) which causes physical separation of photogenerated electron-hole pairs. This was established quantitatively through a self-consistent theoretical model based on coupled Schrodinger and Poisson Equations. It shows that carrier separation slows down the surface recombination velocity to a low value (< 1 cm/s) thus reducing the carrier recombination rate and extending the recombination lifetime by few orders of magnitude. An important outcome of the model is the prediction of G_Pc ~ 106 in a single Ge nanowire (with diameter 60 nm), which matches well with our experimental observation. The model also shows an inverse dependence of G_Pc on the diameter that has been observed experimentally. Though carried out in context of Ge nanowires, the physical model developed has general applicability in other semiconductor nanowires as well. △ Less

Submitted 19 October, 2020; originally announced October 2020.

Comments: 26 pages 6 figures supporting data included

Journal ref: Journal of Physical Chemistry C 41, 2020, 22808

Continuous transition from weakly localized regime to strong localization regime in Nd_{0.7}La_{0.3}NiO_{3} films

Authors: Ravindra Singh Bisht, Gopi Nath Daptary, Aveek Bid, A. K. Raychaudhuri

Abstract: We report an investigation of Metal Insulator Transition (MIT) using conductivity and magnetoconductance (MC) measurements down to 0.3 K in Nd_{0.7}La_{0.3}NiO_{3} films grown on crystalline substrates of LaAlO_{3} (LAO), SrTiO_{3} (STO), and NdGaO_{3}(NGO) by pulsed laser deposition. The film grown on LAO experiences a compressive strain and shows metallic behavior with the onset of a weak resist… ▽ More We report an investigation of Metal Insulator Transition (MIT) using conductivity and magnetoconductance (MC) measurements down to 0.3 K in Nd_{0.7}La_{0.3}NiO_{3} films grown on crystalline substrates of LaAlO_{3} (LAO), SrTiO_{3} (STO), and NdGaO_{3}(NGO) by pulsed laser deposition. The film grown on LAO experiences a compressive strain and shows metallic behavior with the onset of a weak resistivity upturn below 2 K which is linked to the onset of weak localization contribution. Films grown on STO and NGO show a crossover from a Positive Temperature Coefficient (PTC) resistance regime to Negative Temperature Coefficient (NTC) resistance regime at definite temperatures. We establish that a cross-over from PTC to NTC on cooling does not necessarily constitute a MIT because the extrapolated conductivity at zero temperature σ_{0} though small (<10 S/cm) is finite, signalling the existence of a bad metallic state and absence of an activated transport. The value of σ_{0} for films grown on NGO is reduced by a factor of 40 compared to that for films grown on STO. We show that a combination of certain physical factors makes substituted nickelate (that are known to exhibit first order Mott type transition), undergo a continuous transition as seen in systems undergoing disorder/composition driven Anderson transition. The MC measurement also support the above observation and show that at low temperature there exists a positive MC that arises from the quantum interference which co-exists with a spin-related negative MC that becomes progressively stronger as the electrons approach a strongly localized state in the film grown on NGO. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Comments: 24 pages

Journal ref: J. Phys.: Condens. Matter 31 (2019) 145603

Broad Band Single Germanium Nanowire Photodetectors with Surface Oxide Controlled High Optical Gain

Authors: Shaili Sett, Ankita Ghatak, Deepak Sharma, G. V. Pavan Kumar, A. K. Raychaudhuri

Abstract: We have investigated photoconductive properties of single Germanium Nanowires(NWs)of diameter less than 100 nm in the spectral range of 300 to 1100 nm showing ultra large peak Responsivity in excess of 10^{7}AW^{-1}.The NWs were grown by Vapor Liquid Solid method using Au nanoparticle as catalyst. In this report we discuss the likely origin of the ultra large responsivity that may arise from a com… ▽ More We have investigated photoconductive properties of single Germanium Nanowires(NWs)of diameter less than 100 nm in the spectral range of 300 to 1100 nm showing ultra large peak Responsivity in excess of 10^{7}AW^{-1}.The NWs were grown by Vapor Liquid Solid method using Au nanoparticle as catalyst. In this report we discuss the likely origin of the ultra large responsivity that may arise from a combination of various physical effects which are a): Ge and GeO_{x} interface states which act as scavengers of electrons from the photo-generated pairs,leaving the holes free to reach the electrodes,b) Schottky barrier at the metal and NW interface which gets lowered substantially due to carrier diffusion in contact region and (c) photodetector length being small (approximately few μm), negligible loss of photogenerated carriers due to recombination at defect sites. We have observed from power dependence of the optical gain that the gain is controlled by trap states. We find that the surface of the nanowire has presence of a thin layer of GeO_{x} (as evidenced from HRTEM study) which provide interface states. It is observed that these state play a crucial role to provide a radial field for separation of photogenerated electron and hole pair which in turn leads to very high effective photoconductive gain that reaches a very high at low illumination density. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Comments: 32 pages

Journal ref: J. Phys. Chem. C 122(2018)8564

Observation of decoupling of electrons from phonon bath close to a correlation driven metal-insulator transition

Authors: Sudipta Chatterjee, Ravindra Singh Bisht, V. R. Reddy, A. K. Raychaudhuri

Abstract: We observed that close to a Mott transition, over a small temperature range, the predominance of slow relaxations leads to decoupling of electrons from the thermal bath. This has been established by observation of large deviation of the thermal noise in the films of Mott system $NdNiO_{3}$ from the canonical Johnson-Nyquist value of $4k_{B}TR$ close to the transition. It is suggested that such a l… ▽ More We observed that close to a Mott transition, over a small temperature range, the predominance of slow relaxations leads to decoupling of electrons from the thermal bath. This has been established by observation of large deviation of the thermal noise in the films of Mott system $NdNiO_{3}$ from the canonical Johnson-Nyquist value of $4k_{B}TR$ close to the transition. It is suggested that such a large noise arise from small isolated pockets of nanometric metallic phases (estimated size $\sim$ 15-20 nm) within the insulating phase with the charging energy as the control parameter. △ Less

Submitted 5 November, 2020; v1 submitted 14 July, 2020; originally announced July 2020.

Comments: 27 pages with Supplementary, In revised version discussion updated, New references

Fabrication of Germanium-on-insulator in a Ge wafer with a crystalline Ge top layer and buried GeO2 layer by Oxygen ion implantation

Authors: Vishal Kumar Aggarwal, Ankita Ghatak, Dinakar Kanjilal, Debdulal Kabiraj, Achintya Singha, Sandip Bysakh, Samar Kumar Medda, Supriya Chakraborty, A. K. Raychaudhuri

Abstract: The paper reports fabrication of Germanium-on-Insulator (GeOI) wafer by Oxygen ion implantation of an undoped single crystalline Ge wafer of orientation (100). Oxygen ions of energy 200 keV were implanted. The implanted wafer was subjected to Rapid Thermal Annealing to 650 C. The resulting wafer has a top crystalline Ge layer of 220 nm thickness and Buried Oxide layer (BOX) layer of good quality c… ▽ More The paper reports fabrication of Germanium-on-Insulator (GeOI) wafer by Oxygen ion implantation of an undoped single crystalline Ge wafer of orientation (100). Oxygen ions of energy 200 keV were implanted. The implanted wafer was subjected to Rapid Thermal Annealing to 650 C. The resulting wafer has a top crystalline Ge layer of 220 nm thickness and Buried Oxide layer (BOX) layer of good quality crystalline Germanium oxide with thickness around 0.62 micron. The crystalline BOX layer has hexagonal crystal structure with lattice constants close to the standard values. Raman Spectroscopy, cross-sectional HRTEM with SAED and EDS established that the top Ge layer was recrystallized during annealing with faceted crystallites. The top layer has a small tensile strain of around +0.4\% and has estimated dislocation density of 2.7 x 10^{7}cm^{-2}. The thickness, crystallinity and electrical characteristics of the top layer and the quality of the BOX layer of GeO_{2} are such that it can be utilized for device fabrication. △ Less

Submitted 11 July, 2020; originally announced July 2020.

Journal ref: Materials Science & Engineering B 260 (2020) 114616

Enhanced broad band photoresponse of a partially suspended horizontal array of Silicon microlines fabricated on Silicon-On-Insulator wafers

Authors: Shaili Sett, Vishal Kumar Aggarwal, Achintya Singha, Sandip Bysakh, A. K. Raychaudhuri

Abstract: We report a high Responsivity broad band photo-detector working in the wavelength range 400 nm to 1100 nm in a horizontal array of Si microlines (line width ~1 micron) fabricated on a Silicon-on-Insulator (SOI) wafer. The array was made using a combination of plasma etching, wet etching and electron beam lithography. It forms a partially suspended (nearly free) Silicon microstructure on SOI. The a… ▽ More We report a high Responsivity broad band photo-detector working in the wavelength range 400 nm to 1100 nm in a horizontal array of Si microlines (line width ~1 micron) fabricated on a Silicon-on-Insulator (SOI) wafer. The array was made using a combination of plasma etching, wet etching and electron beam lithography. It forms a partially suspended (nearly free) Silicon microstructure on SOI. The array detector under full illumination of the device shows a peak Responsivity of 18 A/W at 800 nm, at a bias of 1V which is more than an order of magnitude of the Responsivity in a commercial Si detector. In a broad band of 400 nm to 1000 nm the Responsivity of the detector is in excess of 10A/W. We found that the suspension of the microlines in the array is necessary to obtain such high Responsivity. The suspension isolates the microlines from the bulk of the wafer and inhibits carrier recombination by the underlying oxide layer leading to enhanced photo-response. This has been validated through simulation. By using focused illumination of selected parts of a single microline of the array, we could isolate the contributions of the different parts of the microline to the photo-current. △ Less

Submitted 11 July, 2020; originally announced July 2020.

Journal ref: Semicond. Sci. Technol. 35 (2020) 025020

Temperature-dependent thermal conductivity of a single Germanium nanowire measured by Optothermal Raman Spectroscopy

Authors: S. Sett, V. K. Aggarwal, A. Singha, A. K. Raychaudhuri

Abstract: We investigate temperature dependent thermal conductivity k(T) in a single Ge nanowire (NW) using Optothermal Raman Spectroscopy which utilizes the temperature dependence of Raman lines as a local probe for temperature. The experiment was done from 300 K to above 700 K, a temperature range in which thermal conductivity of single NWs has been explored rarely. The thermal conductivity of Ge NWs (gro… ▽ More We investigate temperature dependent thermal conductivity k(T) in a single Ge nanowire (NW) using Optothermal Raman Spectroscopy which utilizes the temperature dependence of Raman lines as a local probe for temperature. The experiment was done from 300 K to above 700 K, a temperature range in which thermal conductivity of single NWs has been explored rarely. The thermal conductivity of Ge NWs (grown by vapor liquid solid mechanism), at around room temperature were observed to lie in the range 1.8 to 4.2 W/m.K for diameters between 50 to 110 nm. The thermal conductivity at a given temperature was found to follow a linear dependence on NW diameter, suggesting that the low magnitude of k(T) is determined by diffused scattering of phonons from the surface of NWs that reduces it severely from its bulk value. k(T) shows approximately 1/T behavior which arises from the Umklapp processes. The quantitative estimation of errors arising from the Optothermal measurement and methods to mitigate them has been discussed. We also suggest a quick way to estimate approximately the thermal conductivity of Ge and Si NWs using the above observations. △ Less

Submitted 20 May, 2020; originally announced May 2020.

A reappraisal of constraints on $Z'$ models from unitarity and direct searches at the LHC

Authors: Triparno Bandyopadhyay, Gautam Bhattacharyya, Dipankar Das, Amitava Raychaudhuri

Abstract: In a truly model-independent approach, we reexamine a minimal extension of the Standard Model (SM) through the introduction of an additional $U(1)$ symmetry leading to a new neutral gauge boson ($Z'$), allowing its kinetic mixing with the hypercharge gauge boson. An SM neutral scalar is used to spontaneously break this extra symmetry leading to the mass of the $Z'$. Except for three right-handed n… ▽ More In a truly model-independent approach, we reexamine a minimal extension of the Standard Model (SM) through the introduction of an additional $U(1)$ symmetry leading to a new neutral gauge boson ($Z'$), allowing its kinetic mixing with the hypercharge gauge boson. An SM neutral scalar is used to spontaneously break this extra symmetry leading to the mass of the $Z'$. Except for three right-handed neutrinos no other fermions are added. We use the current LHC Drell-Yan data to put model-independent constraints in the parameter space of three quantities, namely, $M_{Z'}$, the $Z$-$Z'$ mixing angle ($α_z$) and the extra $U(1)$ effective gauge coupling ($g'_x$), which absorb all model dependence. We impose additional constraints from unitarity and low energy neutrino-electron scattering. However, limits extracted from direct searches turn out to be most stringent. We obtain $M_{Z'} > 4.4$ TeV and $|α_z| < 0.001$ at $95\%$ C.L., when the strength of the additional $U(1)$ gauge coupling is the same as that of the SM $SU(2)_L$. △ Less

Submitted 16 August, 2018; v1 submitted 21 March, 2018; originally announced March 2018.

Comments: v3: Minor updates. Version accepted for publication in PRD

Journal ref: Phys. Rev. D 98, 035027 (2018)

Three-Higgs-doublet model under A4 symmetry implies alignment

Authors: Soumita Pramanick, Amitava Raychaudhuri

Abstract: A model with three scalar doublets can be conveniently accommodated within an A4 symmetric framework. The A4 symmetry permits only a restricted form for the scalar potential. We show that for the global minima of this potential alignment follows as a natural consequence. We also verify that in every case positivity and unitarity constraints are satisfactorily met. A model with three scalar doublets can be conveniently accommodated within an A4 symmetric framework. The A4 symmetry permits only a restricted form for the scalar potential. We show that for the global minima of this potential alignment follows as a natural consequence. We also verify that in every case positivity and unitarity constraints are satisfactorily met. △ Less

Submitted 21 December, 2017; v1 submitted 12 October, 2017; originally announced October 2017.

Comments: 17 pages, v2: References added, some changes in text, to appear in JHEP

First principles study of bimetallic Ni$_{13-n}$Ag$_n$ nano-clusters ($n =$ 0$-$13) : Structural, mixing, electronic and magnetic properties

Authors: Soumendu Datta, A. K. Raychaudhuri, Tanusri Saha-Dasgupta

Abstract: Using spin polarized density functional theory (DFT) based calculations, combined with ab-initio molecular dynamics simulation, we carry out a systematic investigation of the bimetallic Ni$_{13-n}$Ag$_n$ nano clusters, for all compositions. This includes prediction of the geometry, mixing behavior, and electronic properties. Our study reveals a tendency towards formation of a core-shell like struc… ▽ More Using spin polarized density functional theory (DFT) based calculations, combined with ab-initio molecular dynamics simulation, we carry out a systematic investigation of the bimetallic Ni$_{13-n}$Ag$_n$ nano clusters, for all compositions. This includes prediction of the geometry, mixing behavior, and electronic properties. Our study reveals a tendency towards formation of a core-shell like structures, following the rule of putting Ni in high coordination site and Ag in low coordination site. Our calculations predict negative mixing energies for the entire composition range, indicating mixing to be favored for the bimetallic small sized Ni-Ag clusters, irrespective of the compositions. The magic composition with the highest stability is found for the NiAg$_{12}$ alloy cluster. We investigate the microscopic origin of core-shell like structure with negative mixing energy, in which the Ni-Ag inter-facial interaction is found to play role. We also study the magnetic properties of the Ni-Ag alloy clusters. The Ni dominated magnetism, consists of parallel alignment of Ni moments while the tiny moments on Ag align in anti-parallel to Ni moments. The hybridization with Ag environment causes reduction of Ni moment. △ Less

Submitted 3 May, 2017; originally announced May 2017.

Journal ref: J. Chem. Phys. vol. 146, page 164301 (2017)

Left-right model with TeV fermionic dark matter and unification

Authors: Triparno Bandyopadhyay, Amitava Raychaudhuri

Abstract: The ingredients for a model with a TeV right-handed scale, gauge coupling unification, and suitable dark matter candidates lie at the heart of left-right symmetry with broken D-parity. After detailing the contents of such a model, with SU(2)R self-conjugate fermions at the right-handed scale aiding in unification of couplings, we explore its dark matter implications and collider signatures. The ingredients for a model with a TeV right-handed scale, gauge coupling unification, and suitable dark matter candidates lie at the heart of left-right symmetry with broken D-parity. After detailing the contents of such a model, with SU(2)R self-conjugate fermions at the right-handed scale aiding in unification of couplings, we explore its dark matter implications and collider signatures. △ Less

Submitted 2 June, 2017; v1 submitted 23 March, 2017; originally announced March 2017.

Comments: Published version. 11 Pages, 4 figures. More details provided for unification of gauge couplings and for proton decay lifetime estimate. References added

Journal ref: Phys. Lett. B 771 (2017) 206

A neutrino mass model with S3 symmetry and see-saw interplay

Authors: Soumita Pramanick, Amitava Raychaudhuri

Abstract: We develop a see-saw model for neutrino masses and mixing with an S3\times Z3 symmetry. It involves an interplay of Type-I and Type-II see-saw contributions of which the former is subdominant. The S3 \times Z3 quantum numbers of the fermion and scalar fields are chosen such that the Type-II see-saw generates a mass matrix which incorporates the atmospheric mass splitting and sets θ_{23} = π/4. The… ▽ More We develop a see-saw model for neutrino masses and mixing with an S3\times Z3 symmetry. It involves an interplay of Type-I and Type-II see-saw contributions of which the former is subdominant. The S3 \times Z3 quantum numbers of the fermion and scalar fields are chosen such that the Type-II see-saw generates a mass matrix which incorporates the atmospheric mass splitting and sets θ_{23} = π/4. The solar splitting and θ_{13} are absent, while the third mixing angle can achieve any value, θ_{12}^0. Specific choices of θ_{12}^0 are of interest, e.g., 35.3^\circ (tribimaximal), 45.0^\circ (bimaximal), 31.7^\circ (golden ratio), and 0^\circ (no solar mixing). The role of the Type-I see-saw is to nudge all the above into the range indicated by the data. The model results in novel interrelationships between these quantities due to their common origin, making it readily falsifiable. For example, normal (inverted) ordering is associated with θ_{23} in the first (second) octant. CP-violation is controlled by phases in the right-handed neutrino Majorana mass matrix, M_{νR}. In their absence, only normal ordering is admissible. When M_{νR} is complex the Dirac CP-phase, δ, can be large, i.e., \sim \pm π/2, and inverted ordering is also allowed. The preliminary results from T2K and NOVA which favour normal ordering and δ\sim -π/2 are indicative, in this model, of a lightest neutrino mass of 0.05 eV or more. △ Less

Submitted 28 December, 2016; v1 submitted 20 September, 2016; originally announced September 2016.

Comments: 22 pages, 2 figures, v2: References added, v3: Published version

Journal ref: Phys. Rev. D94, 115028 (2016)

Implications of the CMS search for W_R on Grand Unification

Authors: Triparno Bandyopadhyay, Biswajoy Brahmachari, Amitava Raychaudhuri

Abstract: The CMS experiment at the Large Hadron Collider has reported a 2.8$σ$ excess in the $(2e)(2jets)$ channel around 2.1 TeV. Interpretation of this data is reconsidered in terms of the production of a right-handed weak gauge boson, $W_R$, of the left-right symmetric model and in an $SO(10)$ grand unified theory abiding by the Extended Survival Hypothesis. The left-right symmetric model can be consist… ▽ More The CMS experiment at the Large Hadron Collider has reported a 2.8$σ$ excess in the $(2e)(2jets)$ channel around 2.1 TeV. Interpretation of this data is reconsidered in terms of the production of a right-handed weak gauge boson, $W_R$, of the left-right symmetric model and in an $SO(10)$ grand unified theory abiding by the Extended Survival Hypothesis. The left-right symmetric model can be consistent with this excess if (a) the heavy right-handed neutrino has a mass near $W_R$, or (b) if $g_L \neq g_R$, or (c) the right-handed CKM matrix is nontrivial. Combinations of the above possibilities are also viable. A $W_R$ with a mass in the TeV region if embedded in $SO(10)$ is not compatible with $g_L = g_R$. Rather, it implies $0.64 \leq g_R/g_L \leq 0.78$. Further, a unique symmetry-breaking route -- the order being left-right discrete symmetry breaking first, followed by $SU(4)_C$ and finally $SU(2)_R$ -- to the standard model is picked out. The $L \leftrightarrow R$ discrete symmetry has to be broken at around $10^{16}$ GeV. The grand unification scale is pushed to $10^{18}$ GeV making the detection of proton decay in ongoing searches rather unlikely. The $SU(4)_C$ breaking scale can be at its allowed lower limit of $10^6$ GeV so that $n - \bar{n}$ oscillation or flavour changing processes such as $K_L \rightarrow μe$ and $B_{d,s} \rightarrow μe$ may be detectable. The Higgs scalar multiplets responsible for $SO(10)$ symmetry breaking at various stages are uniquely identified so long as one adheres to a minimalist principle. We also remark, {\em en passant}, about a partially unified Pati-Salam model. △ Less

Submitted 18 February, 2016; v1 submitted 10 September, 2015; originally announced September 2015.

Comments: 21 pages, v2: Published version. Clarifications and references added

Journal ref: JHEP 1602 (2016) 023

Obstacles to extending R-parity violation to Supersymmetric SU(5)

Authors: Najimuddin Khan, Subhendu Rakshit, Amitava Raychaudhuri

Abstract: We explore the consequences of promoting bilinear R-parity violation, usually formulated in the minimal supersymmetric standard model framework, to a supersymmetric SU(5) grand unified theory. We observe that the limits on proton decay and neutrino mass place tight constraints on the bilinear SU(5) R-parity violating parameters creating a different doublet-triplet issue which cannot be resolved by… ▽ More We explore the consequences of promoting bilinear R-parity violation, usually formulated in the minimal supersymmetric standard model framework, to a supersymmetric SU(5) grand unified theory. We observe that the limits on proton decay and neutrino mass place tight constraints on the bilinear SU(5) R-parity violating parameters creating a different doublet-triplet issue which cannot be resolved by an extension of the usual fine-tuning in the symmetry breaking scalar sector. If the parameters are made to satisfy the constraints, albeit unnaturally, there remains no room for the possibility to correct the SU(5) fermion mass ratios by introducing R-parity violation. △ Less

Submitted 4 September, 2015; originally announced September 2015.

Comments: 14 pages

A4-based see-saw model for realistic neutrino masses and mixing

Authors: Soumita Pramanick, Amitava Raychaudhuri

Abstract: We present an $A4$-based model where neutrino masses arise from a combination of see-saw mechanisms. The model is motivated by several small mixing and mass parameters indicated by the data. These are $θ_{13}$, the solar mass splitting, and the small deviation of $θ_{23}$ from maximal mixing (= $π/4$). We take the above as indications that at some level the small quantities are well-approximated b… ▽ More We present an $A4$-based model where neutrino masses arise from a combination of see-saw mechanisms. The model is motivated by several small mixing and mass parameters indicated by the data. These are $θ_{13}$, the solar mass splitting, and the small deviation of $θ_{23}$ from maximal mixing (= $π/4$). We take the above as indications that at some level the small quantities are well-approximated by zero. In particular the mixing angles, to a zero order, should be either 0 or $π/4$. Accordingly, in this model the Type-II see-saw dominates and generates the larger atmospheric mass splitting and sets $θ_{23} = π/4$. The other mixing angles are vanishing as is the solar splitting. We show how the $A4$ assignment for the lepton doublets leads to this form. We also specify the $A4$ properties of the right-handed neutrinos which result in a smaller Type-I see-saw contribution that acts as a perturbation and shifts the angles $θ_{12}$ and $θ_{13}$ into the correct range and the desired value of $Δm^2_{solar}$ is produced. The $A4$ symmetry results in relationships between these quantities as well as with a small deviation of $θ_{23}$ from $π/4$. If the right-handed neutrino mass matrix, $M_R$, is chosen real then there is no leptonic CP-violation and only Normal Ordering is admissible. If $M_R$ is complex then Inverted Ordering is also allowed with the proviso that the CP-phase, $δ$, is large, i.e., $\sim π/2$ or $-π/2$. The preliminary results from NO$ν$A favouring Normal Ordering and $δ$ near $-π/2$ imply quasi-degenerate neutrino masses in this model. △ Less

Submitted 3 March, 2016; v1 submitted 10 August, 2015; originally announced August 2015.

Comments: v2: 23 pages, 3 figures, Appendix on scalar potential minimization added, Matches with the published version

Journal ref: Phys. Rev. D 93, 033007 (2016)

Physics Potential of the ICAL detector at the India-based Neutrino Observatory (INO)

Authors: The ICAL Collaboration, Shakeel Ahmed, M. Sajjad Athar, Rashid Hasan, Mohammad Salim, S. K. Singh, S. S. R. Inbanathan, Venktesh Singh, V. S. Subrahmanyam, Shiba Prasad Behera, Vinay B. Chandratre, Nitali Dash, Vivek M. Datar, V. K. S. Kashyap, Ajit K. Mohanty, Lalit M. Pant, Animesh Chatterjee, Sandhya Choubey, Raj Gandhi, Anushree Ghosh, Deepak Tiwari, Ali Ajmi, S. Uma Sankar, Prafulla Behera, Aleena Chacko , et al. (67 additional authors not shown)

Abstract: The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the mul… ▽ More The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the multi-GeV range. This study will be crucial to address some of the outstanding issues in neutrino oscillation physics, including the fundamental issue of neutrino mass hierarchy. In this document, we present the physics potential of the detector as obtained from realistic detector simulations. We describe the simulation framework, the neutrino interactions in the detector, and the expected response of the detector to particles traversing it. The ICAL detector can determine the energy and direction of the muons to a high precision, and in addition, its sensitivity to multi-GeV hadrons increases its physics reach substantially. Its charge identification capability, and hence its ability to distinguish neutrinos from antineutrinos, makes it an efficient detector for determining the neutrino mass hierarchy. In this report, we outline the analyses carried out for the determination of neutrino mass hierarchy and precision measurements of atmospheric neutrino mixing parameters at ICAL, and give the expected physics reach of the detector with 10 years of runtime. We also explore the potential of ICAL for probing new physics scenarios like CPT violation and the presence of magnetic monopoles. △ Less

Submitted 9 May, 2017; v1 submitted 27 May, 2015; originally announced May 2015.

Comments: 139 pages, Physics White Paper of the ICAL (INO) Collaboration, Contents identical with the version published in Pramana - J. Physics

Report number: INO/ICAL/PHY/NOTE/2015-01

Journal ref: Pramana - J. Phys (2017) 88 : 79

Relating small neutrino masses and mixing

Authors: Soumita Pramanick, Amitava Raychaudhuri

Abstract: Experiments on neutrino oscillations have uncovered several small parameters, $θ_{13}$ being a prominent one. Others are the solar mass splitting {\em vis-à-vis} the atmospheric one and the deviation of $θ_{23}$ from maximal mixing. In this talk we elaborate on a neutrino mass model based on the see-saw mechanism in which the mixing angles to start with are either vanishing ($θ_{13}$ and $θ_{12}$)… ▽ More Experiments on neutrino oscillations have uncovered several small parameters, $θ_{13}$ being a prominent one. Others are the solar mass splitting {\em vis-à-vis} the atmospheric one and the deviation of $θ_{23}$ from maximal mixing. In this talk we elaborate on a neutrino mass model based on the see-saw mechanism in which the mixing angles to start with are either vanishing ($θ_{13}$ and $θ_{12}$) or $π/4$ ($θ_{23}$). The atmospheric mass splitting is taken as a part of this initial structure but the solar splitting is absent. A perturbative contribution, originating from a Type-I see-saw, results in non-zero values of $θ_{13}$, $θ_{12}$, $Δm^2_{solar}$, and shifts $θ_{23}$ slightly from $π/4$, interrelating them all. The model incorporates CP-violation, the phase $δ$ being close to 3$π$/2 for (a) quasi-degeneracy or (b) inverted mass ordering. It will be put to test as the neutrino parameters get better determined. △ Less

Submitted 26 May, 2015; v1 submitted 7 April, 2015; originally announced April 2015.

Comments: Talk given by A. Raychaudhuri at the International Conference on Massive Neutrinos, IAS, NTU, Singapore, February 2015; to appear in the Proceedings; based closely on arXiv:1411:0320, v2: One typo fixed, v3: Published version, minor typographical changes, references updated

Journal ref: IJMP A Vol 30, 1530036 (2015)

Are the small neutrino oscillation parameters all related?

Authors: Soumita Pramanick, Amitava Raychaudhuri

Abstract: Neutrino oscillations reveal several small parameters, namely, $θ_{13}$, the solar mass splitting {\em vis-à-vis} the atmospheric one, and the deviation of $θ_{23}$ from maximal mixing. Can these small quantities all be traced to a single source and, if so, how could that be tested? Here a see-saw model for neutrino masses is presented wherein a dominant term generates the atmospheric mass splitti… ▽ More Neutrino oscillations reveal several small parameters, namely, $θ_{13}$, the solar mass splitting {\em vis-à-vis} the atmospheric one, and the deviation of $θ_{23}$ from maximal mixing. Can these small quantities all be traced to a single source and, if so, how could that be tested? Here a see-saw model for neutrino masses is presented wherein a dominant term generates the atmospheric mass splitting with maximal mixing in this sector, kee** $θ_{13} = 0$ and zero solar splitting. A Type-I see-saw perturbative contribution results in non-zero values of $θ_{13}$, $Δm^2_{solar}$, $θ_{12}$, as well as allows $θ_{23}$ to deviate from $π/4$ in consistency with the data while interrelating them all. CP-violation is a natural consequence and is large ($δ\sim π/2, 3π/2$) for inverted mass ordering. The model will be tested as precision on the neutrino parameters is sharpened. △ Less

Submitted 26 May, 2015; v1 submitted 2 November, 2014; originally announced November 2014.

Comments: v1: 8 pages, 2 Figures, v2: Published version, Journal title different, minor typographical changes, presentation improved, references added and updated. 9 pages, 3 Figures, Fig. 2 split into Fig. 2 and Fig. 3 for clarity

Journal ref: Phys. Lett. B 746, 237-241 (2015)

KK-number non-conserving decays: Signal of n = 2 excitations of Extra-Dimensional Models at the LHC

Authors: Ujjal Kumar Dey, Amitava Raychaudhuri

Abstract: In the simplest universal extra-dimension models Kaluza-Klein (KK) parity distinguishes the states with odd and even KK-number. We calculate the coupling of a 2n-level top quark to a top quark and the Higgs scalar (both n = 0 states), absent at the tree level, which is mediated by strong interactions at one-loop. We show that the strength of this coupling is independent of n. We observe that the d… ▽ More In the simplest universal extra-dimension models Kaluza-Klein (KK) parity distinguishes the states with odd and even KK-number. We calculate the coupling of a 2n-level top quark to a top quark and the Higgs scalar (both n = 0 states), absent at the tree level, which is mediated by strong interactions at one-loop. We show that the strength of this coupling is independent of n. We observe that the decay due to this coupling, which conserves KK-parity, can be a few per cent of the phase space suppressed decay to two n-level states which proceeds through tree-level couplings. We explore the prospects of verification of this result at the Large Hadron Collider through the production of an n = 2 KK top-antitop pair both of which subsequently decay to a zero mode top quark/antiquark and a Higgs boson. △ Less

Submitted 26 February, 2015; v1 submitted 6 October, 2014; originally announced October 2014.

Comments: 11 pages, v2: One additional figure (published version)

Journal ref: Nuclear Physics B893 (2015) 408-419

Kinetic mixing and symmetry breaking dependent interactions of the dark photon

Authors: Biswajoy Brahmachari, Amitava Raychaudhuri

Abstract: We examine spontaneous symmetry breaking of a renormalisable U(1) x U(1) gauge theory coupled to fermions when kinetic mixing is present. We do not assume that the kinetic mixing parameter is small. A rotation plus scaling is used to remove the mixing and put the gauge kinetic terms in the canonical form. Fermion currents are also rotated in a non-orthogonal way by this basis transformation. Throu… ▽ More We examine spontaneous symmetry breaking of a renormalisable U(1) x U(1) gauge theory coupled to fermions when kinetic mixing is present. We do not assume that the kinetic mixing parameter is small. A rotation plus scaling is used to remove the mixing and put the gauge kinetic terms in the canonical form. Fermion currents are also rotated in a non-orthogonal way by this basis transformation. Through suitable redefinitions the interaction is cast into a diagonal form. This framework, where mixing is absent, is used for subsequent analysis. The symmetry breaking determines the fermionic current which couples to the massless gauge boson. The strength of this coupling as well as the couplings of the massive gauge boson are extracted. This formulation is used to consider a gauged model for dark matter by identifying the massless gauge boson with the photon and the massive state to its dark counterpart. Matching the coupling of the residual symmetry with that of the photon sets a lower bound on the kinetic mixing parameter. We present analytical formulae of the couplings of the dark photon in this model and indicate some physics consequences. △ Less

Submitted 7 September, 2014; originally announced September 2014.

Comments: Latex, Nuclear Physics B (to appear)

Universal Extra-Dimensional models with boundary terms: Probing at the LHC

Authors: Anindya Datta, Ujjal Kumar Dey, Amitava Raychaudhuri, Avirup Shaw

Abstract: In universal extra-dimensional models a conserved Z_2 parity stabilizes the lightest Kaluza-Klein particle, a dark-matter candidate. Boundary-localized kinetic terms, in general, do not preserve this symmetry. We examine, in the presence of such terms, the single production of Kaluza-Klein excitations of the neutral electroweak gauge bosons and their decay to zero-mode fermion-antifermion pairs. W… ▽ More In universal extra-dimensional models a conserved Z_2 parity stabilizes the lightest Kaluza-Klein particle, a dark-matter candidate. Boundary-localized kinetic terms, in general, do not preserve this symmetry. We examine, in the presence of such terms, the single production of Kaluza-Klein excitations of the neutral electroweak gauge bosons and their decay to zero-mode fermion-antifermion pairs. We explore how experiments at the Large Hadron Collider constrain the boundary-localized kinetic terms for different compactification radii. △ Less

Submitted 9 December, 2013; originally announced December 2013.

Comments: Written version of talk at Delhi-LC2012, submitted to the Editors of the Conference Proceedings in August 2013, based on work reported in arXiv: 1205.4334 [hep-ph]

Journal ref: Nuclear Physics B (Proc. Suppl.) 251-252, 39 (2014)

LHC limits on KK-parity non-conservation in the strong sector of universal extra-dimension models

Authors: Anindya Datta, Amitava Raychaudhuri, Avirup Shaw

Abstract: In five-dimensional universal extra-dimensional models compactified on an $S^1/Z_2$ orbifold four-dimensional kinetic terms are allowed at the two fixed points. If these terms are unequal then Kaluza-Klein (KK) parity is broken. Within such a framework we consider resonant production of the n = 1 KK-gluon at the Large Hadron Collider and its subsequent decay to $t\bar{t}$, where both production an… ▽ More In five-dimensional universal extra-dimensional models compactified on an $S^1/Z_2$ orbifold four-dimensional kinetic terms are allowed at the two fixed points. If these terms are unequal then Kaluza-Klein (KK) parity is broken. Within such a framework we consider resonant production of the n = 1 KK-gluon at the Large Hadron Collider and its subsequent decay to $t\bar{t}$, where both production and decay are KK-parity non-conserving. We use, for the first time, the exclusion data for a $t\bar{t}$ resonance obtained by the ATLAS collaboration to limit the mass ranges of quark and gluon excitations of the KK-parity-violating model which are found to be in the ballpark of 900 GeV. △ Less

Submitted 24 January, 2014; v1 submitted 8 October, 2013; originally announced October 2013.

Comments: v2: Results based on 8 TeV LHC data, Figures and discussions now in terms of exclusion regions of KK-excitation masses, Published version

Journal ref: Physics Letters B 730 (2014), pp. 42-49

Smallness of θ_{13} and the size of the Solar Mass Splitting: Are they related?

Authors: Soumita Pramanick, Amitava Raychaudhuri

Abstract: Compared to the other neutrino mixing angles θ_{13} is small. The solar mass splitting is about two orders smaller than the atmospheric splitting. We show that it is possible that both are perturbative effects on a more symmetric structure. The perturbation also affects the solar mixing angle and can make alternate mixing patterns such as tribimaximal, bimaximal, or other variants equally viable.… ▽ More Compared to the other neutrino mixing angles θ_{13} is small. The solar mass splitting is about two orders smaller than the atmospheric splitting. We show that it is possible that both are perturbative effects on a more symmetric structure. The perturbation also affects the solar mixing angle and can make alternate mixing patterns such as tribimaximal, bimaximal, or other variants equally viable. For real perturbations this can be accomplished only for normal mass ordering and with the lightest neutrino mass less than 10^{-2} eV. Both mass orderings can be accommodated by going over to complex perturbations provided the lightest neutrino is heavier. The CP-phase in the lepton sector that emerges distinguishes between different mixing models. △ Less

Submitted 21 November, 2013; v1 submitted 6 August, 2013; originally announced August 2013.

Comments: Latex, 17 pages, 5 figures, v2: References added, Published version

Journal ref: Phys. Rev. D88, 093009 (2013)

Boundary Localized Terms in Universal Extra-Dimensional Models through a Dark Matter perspective

Authors: Anindya Datta, Ujjal Kumar Dey, Amitava Raychaudhuri, Avirup Shaw

Abstract: In universal extra dimension (UED) models with one compactified extra dimension, a Z_2 symmetry, termed KK-parity, ensures the stability of the lightest Kaluza-Klein particle (LKP). This symmetry leads to two fixed points. In non-minimal versions of UED boundary-localised terms (BLT) for different fields are included at these fixed points and KK-parity may be violated. However, BLTs with same stre… ▽ More In universal extra dimension (UED) models with one compactified extra dimension, a Z_2 symmetry, termed KK-parity, ensures the stability of the lightest Kaluza-Klein particle (LKP). This symmetry leads to two fixed points. In non-minimal versions of UED boundary-localised terms (BLT) for different fields are included at these fixed points and KK-parity may be violated. However, BLTs with same strength at both points induce a new Z_2 symmetry which restores the stability of the LKP. We show that the BLTs serve to relax the bounds set on the compactification scale in UED by the dark matter relic density requirement. At the same time, the precision of the dark matter measurements severely correlates the BLT parameters of gauge bosons and fermions. Depending on the parameter values, the LKP can be chosen to be the level-1 photon, which is essentially the B^(1), or the level-1 Z-boson, basically the W_3^(1). We find that in the latter case the relic density is too small for a W_3^(1) with a \sim 1 TeV mass. We also explore the prospects of direct detection of an LKP which matches the observed dark matter relic density. △ Less

Submitted 30 July, 2013; v1 submitted 20 May, 2013; originally announced May 2013.

Comments: 23 pages including Appendix, 6 figures, Minor typographical improvements,Publish version

Journal ref: Phys. Rev. D 88, 016011 (2013)

Electrical and magnetic transport study on strain driven ferromagnetic insulating thin film of low doped manganite

Authors: Rajib Nath, Sudeshna Samanta, A. K. Raychaudhuri

Abstract: In this paper we have created a strain driven single crystal like ferromagnetic insulating (FMI) state in a PLD grown thin film of low doped LCMO(X = 0.15)on NGO(100) substrate and make a thorough study of strain effects on the electric and magnetic transport of this film. We have studied and compared the FMI state, ferromagnetic transition temperature (TC), ferromagnetic insulating temperature (T… ▽ More In this paper we have created a strain driven single crystal like ferromagnetic insulating (FMI) state in a PLD grown thin film of low doped LCMO(X = 0.15)on NGO(100) substrate and make a thorough study of strain effects on the electric and magnetic transport of this film. We have studied and compared the FMI state, ferromagnetic transition temperature (TC), ferromagnetic insulating temperature (TFMI) and the resistivity of the film in details with bulk single crystals of X=0.18 to 0.22 do** region. We have found that TFMI and the localisation length of the carriers are increased and there is also a decrease in the Coulomb gap. The magneto transport behavior of the film also differs from the bulk single crystals and the magnetoresistance of the sample is nearly 20 to 75% with the application of the applied field(0 to 10 T) and it falls up to 5 to 40% below a certain temperature and the TC of the film increases to higher temperature with the increasing field. The film also shows anisotropic magnetoresistance as large as 20% depending on applied magnetic field direction. △ Less

Submitted 31 December, 2012; originally announced December 2012.

Electric field driven destabilization of the insulating state in nominally pure LaMnO3

Authors: Rajib Nath, A. K. Raychaudhuri, Ya. M. Mukovskii, Parthasarathi Mondal, Dipten Bhattacharya, P. Mandal

Abstract: We report an electric field driven destabilization of the insulating state in nominally pure LaMnO3 single crystal with a moderate field which leads to a resistive state transition below 300 K. The transition is between the insulating state in LaMnO3 and a high resistance bad metallic state that has a temperature independent resistivity. The transition occurs at a threshold field (Eth) which shows… ▽ More We report an electric field driven destabilization of the insulating state in nominally pure LaMnO3 single crystal with a moderate field which leads to a resistive state transition below 300 K. The transition is between the insulating state in LaMnO3 and a high resistance bad metallic state that has a temperature independent resistivity. The transition occurs at a threshold field (Eth) which shows a steep enhancement on cooling. While at lower temperatures the transition is sharp and involves large change in resistance but it softens on heating and eventually absent above 280K. When the Mn4+ content is increased by Sr substitution up to x=0.1, the observed transition though observable in certain temperature range, softens considerably. The observation has been explained as bias driven percolation type transition between two coexisting phases, where the majority phase is a charge and orbitally ordered polaronic insulating phase and the minority phase is a bad metallic phase. The mobile fraction f of the bad metallic phase deduced from the experimental data follows an activated kinetics with the activation energy nearly equal to 200 meV and the prefactor fo is a strong function of the field that leads to a rapid enhancement of f on application of field leading to the resistive state transition. We suggest likely scenarios for such co-existing phases in nominally pure LaMnO3 that can lead to the bias driven percolation type transition. △ Less

Submitted 4 March, 2013; v1 submitted 5 December, 2012; originally announced December 2012.

Comments: Accepted in JPCM

Large photoresponse of Cu:TCNQ nanowire arrays formed as aligned nanobridges

Authors: Rabaya Basori, K. Das, Prashant Kumar, K. S. Narayan, A. K. Raychaudhuri

Abstract: We report for the first time a large photoresponse in an array of charge transfer complex Cu:TCNQ nanowires (average diameter 30 nm) fabricated as a nanobridge device. The device shows highest photoresponse for excitation with 405 nm light which matches with its absorption peak. The current gain at zero bias can reach ~104 with an illumination power density of 2x106 W/m2. The zero bias responsivit… ▽ More We report for the first time a large photoresponse in an array of charge transfer complex Cu:TCNQ nanowires (average diameter 30 nm) fabricated as a nanobridge device. The device shows highest photoresponse for excitation with 405 nm light which matches with its absorption peak. The current gain at zero bias can reach ~104 with an illumination power density of 2x106 W/m2. The zero bias responsivity is ~0.3 mA/W which increases on applying bias reaching 1.0 A/W or more for a bias of 2.0 Volt. Dark and illuminated I-V data are analyzed by two back-to-back Schottky diodes model, which shows the predominant photocurrent in the device arising from the photoconductive response of the nanowires. △ Less

Submitted 22 October, 2012; originally announced October 2012.

Comments: 4 figures

Observation of a Large Photo-response in a Single Nanowire (Diameter ~30 nm) of Charge Transfer Complex Cu:TCNQ

Authors: Rabaya Basori, Kaustuv Das, T. Phanindra. Sai, Prashant Kumar, K. S. Narayan, Arup K. Raychaudhuri

Abstract: We report for the first time large photoresponse in a single NW of the charge transfer complex Cu:TCNQ. We fabricate a metal-semiconductor-metal device with a single NW and focus ion beam deposited Pt. We observe large photocurrent even at zero bias. The spectral dependence of the photoresponse follows the main absorption at ~ 405 nm which has the primarily responsible for photogenerated carriers.… ▽ More We report for the first time large photoresponse in a single NW of the charge transfer complex Cu:TCNQ. We fabricate a metal-semiconductor-metal device with a single NW and focus ion beam deposited Pt. We observe large photocurrent even at zero bias. The spectral dependence of the photoresponse follows the main absorption at ~ 405 nm which has the primarily responsible for photogenerated carriers. We have quantitatively analyzed the bias dependent photocurrent by a model of two back to back Schottky diodes connected by a series resistance. The observation shows that the large photoresponse of the device primarily occurs due to the reduction of the barrier at the contact regions due to illumination along with the photoconductive contribution. There is also a bias driven reduction of the nanowire resistance that is a unique feature for the material. △ Less

Submitted 18 October, 2012; originally announced October 2012.

Comments: 24 pages, 5 figures

Universal Extra-Dimensional models with boundary localized kinetic terms: Probing at the LHC

Authors: Anindya Datta, Ujjal Kumar Dey, Avirup Shaw, Amitava Raychaudhuri

Abstract: In universal extra-dimensional models a conserved $Z_2$ parity ensures the stability of the lightest Kaluza-Klein particle, a potential dark-matter candidate. We show here that boundary-localized kinetic terms, in general, do not preserve this symmetry. We examine the single production of a Kaluza-Klein excitation of the photon and its decay to zero-mode fermion-antifermion pairs in the presence o… ▽ More In universal extra-dimensional models a conserved $Z_2$ parity ensures the stability of the lightest Kaluza-Klein particle, a potential dark-matter candidate. We show here that boundary-localized kinetic terms, in general, do not preserve this symmetry. We examine the single production of a Kaluza-Klein excitation of the photon and its decay to zero-mode fermion-antifermion pairs in the presence of such terms. We explore how experiments at the Large Hadron Collider at CERN can help constrain the boundary-localized kinetic terms for different choices of the compactification radius. △ Less

Submitted 6 March, 2013; v1 submitted 19 May, 2012; originally announced May 2012.

Comments: Major changes included in this version with some new results

Journal ref: Phys. Rev D 87, 076002 (2013)

Perturbative generation of theta_{13} from tribimaximal neutrino mixing

Authors: Biswajoy Brahmachari, Amitava Raychaudhuri

Abstract: Solar and atmospheric neutrino oscillations are consistent with a tribimaximal form of the mixing matrix $U$ of the lepton sector. Exact tribimaximal mixing leads to $θ_{13}=0$. Recent results from the Daya Bay and RENO experiments have established a non-zero value of $θ_{13}$. Kee** the leading behaviour of $U$ as tribimaximal we perform a model-independent perturbative calculation to incorpora… ▽ More Solar and atmospheric neutrino oscillations are consistent with a tribimaximal form of the mixing matrix $U$ of the lepton sector. Exact tribimaximal mixing leads to $θ_{13}=0$. Recent results from the Daya Bay and RENO experiments have established a non-zero value of $θ_{13}$. Kee** the leading behaviour of $U$ as tribimaximal we perform a model-independent perturbative calculation to incorporate a non-vanishing $θ_{13}$. We identify the nature of the perturbation matrix and consider the possibility of the solar neutrino splitting also resulting from it. We calculate up to first order in perturbation theory and evaluate the deviations proportional to $\sin θ_{13}$ while including CP-nonconservation. Finally, we briefly discuss a gauge model where such an addition to the neutrino mass matrix arises through one-loop effects. △ Less

Submitted 20 September, 2012; v1 submitted 25 April, 2012; originally announced April 2012.

Comments: 9 pages, 1 eps fig. v2: Several corrections and new results. References added. v3: More discussions and clarifications in presentation, published version

Journal ref: Physical Review D86, 051302(R) (2012)

Electrical transport properties of nanostructured ferromagnetic perovskite oxides La_0.67Ca_0.33MnO_3 and La_0.5Sr_0.5CoO_3 at low temperatures (5 K > T >0.3 K) and high magnetic field

Authors: Tapati Sarkar, M. Venkata Kamalakar, A. K. Raychaudhuri

Abstract: We report a comprehensive study of the electrical and magneto-transport properties of nanocrystals of La_0.67Ca_0.33MnO_3 (LCMO) (with size down to 15 nm) and La_0.5Sr_0.5CoO_3 (LSCO) (with size down to 35 nm) in the temperature range 0.3 K to 5 K and magnetic fields upto 14 T. The transport, magnetotransport and non-linear conduction (I-V curves) were analysed using the concept of Spin Polarized… ▽ More We report a comprehensive study of the electrical and magneto-transport properties of nanocrystals of La_0.67Ca_0.33MnO_3 (LCMO) (with size down to 15 nm) and La_0.5Sr_0.5CoO_3 (LSCO) (with size down to 35 nm) in the temperature range 0.3 K to 5 K and magnetic fields upto 14 T. The transport, magnetotransport and non-linear conduction (I-V curves) were analysed using the concept of Spin Polarized Tunnelling in the presence of Coulomb blockade. The activation energy of transport, Δ, was used to estimate the tunnelling distances and the inverse decay length of the tunnelling wave function (χ) and the height of the tunnelling barrier (Φ_B). The magnetotransport data were used to find out the magnetic field dependences of these tunnelling parameters. The data taken over a large magnetic field range allowed us to separate out the MR contributions at low temperatures arising from tunnelling into two distinct contributions. In LCMO, at low magnetic field, the transport and the MR are dominated by the spin polarization, while at higher magnetic field the MR arises from the lowering of the tunnel barrier by the magnetic field leading to an MR that does not saturate even at 14 T. In contrast, in LSCO, which does not have substantial spin polarization, the first contribution at low field is absent, while the second contribution related to the barrier height persists. The idea of inter-grain tunnelling has been validated by direct measurements of the non-linear I-V data in this temperature range and the I-V data was found to be strongly dependent on magnetic field. We made the important observation that a gap like feature (with magnitude ~ E_C, the Coulomb charging energy) shows up in the conductance g(V) at low bias for the systems with smallest nanocrystal size at lowest temperatures (T < 0.7 K). The gap closes as the magnetic field and the temperature are increased. △ Less

Submitted 17 March, 2012; originally announced March 2012.

Comments: 13 figures

Journal ref: New Journal of Physics, Vol. 14, Pg. 033026 (2012)

Probing defects in chemically synthesized ZnO nanostrucures by Positron Annihilation and Photoluminescence Spectroscopy

Authors: S K Chaudhuri, Manoranjan Ghosh, D Das, A K Raychaudhuri

Abstract: The present article describes the size induced changes in the structural arrangement of intrinsic defects present in chemically synthesized ZnO nanoparticles of various sizes. Routine X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM) have been performed to determine the shapes and sizes of the nanocrystalline ZnO samples. Detailed studies using positron annihilation spectroscopy r… ▽ More The present article describes the size induced changes in the structural arrangement of intrinsic defects present in chemically synthesized ZnO nanoparticles of various sizes. Routine X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM) have been performed to determine the shapes and sizes of the nanocrystalline ZnO samples. Detailed studies using positron annihilation spectroscopy reveals the presence of zinc vacancy. Whereas analysis of photoluminescence results predict the signature of charged oxygen vacancies. The size induced changes in positron parameters as well as the photoluminescence properties, has shown contrasting or non-monotonous trends as size varies from 4 nm to 85 nm. Small spherical particles below a critical size (~ 23 nm) receive more positive surface charge due to the higher occupancy of the doubly charge oxygen vacancy as compared to the bigger nanostructures where singly charged oxygen vacancy predominates. This electronic alteration has been seen to trigger yet another interesting phenomenon, described as positron confinement inside nanoparticles. Finally, based on all the results, a model of the structural arrangement of the intrinsic defects in the present samples has been reconciled. △ Less

Submitted 13 September, 2011; originally announced September 2011.

Journal ref: J. Appl. Phys. 108, 064319 (2010)

Electric field induced reversible control of visible photoluminescence from ZnO nanoparticles

Authors: Manoranjan Ghosh, A. K. Raychaudhuri

Abstract: Reversible control of the photoluminescence of ZnO occurring in the visible range, has been achieved by application of a few volts (< 5V) to a device consisting of nanostructured ZnO film sandwiched between Indium Tin Oxide electrode and polyethylene oxide-lithium perchlorate, a solid polymer electrolyte. The photoluminescence intensity shows nearly 100% modulation with a response time less than 3… ▽ More Reversible control of the photoluminescence of ZnO occurring in the visible range, has been achieved by application of a few volts (< 5V) to a device consisting of nanostructured ZnO film sandwiched between Indium Tin Oxide electrode and polyethylene oxide-lithium perchlorate, a solid polymer electrolyte. The photoluminescence intensity shows nearly 100% modulation with a response time less than 30 seconds, when the bias is applied at the electrolyte-electrode. A model is proposed for the observed effect that is based on defect states of ZnO and the band bending at the ZnO-electrolyte interface that can be changed by the applied bias. △ Less

Submitted 13 September, 2011; originally announced September 2011.

Journal ref: Appl. Phys. Lett. 98, 153109 (2011)

Structure and optical properties of Cd substituted ZnO (Zn1-xCdxO) nanostructures synthesized by high pressure solution route

Authors: Manoranjan Ghosh, A. K. Raychaudhuri

Abstract: We report synthesis of Cd substituted ZnO nanostructures (Zn1-xCdxO with x upto \approx .09) by high pressure solution growth method. The synthesized nanostructures comprise of nanocrystals that are both particles (~ 10-15 nm) and rods which grow along (002) direction as established by Transmission electron microscope (TEM) and X-ray diffraction (XRD) analysis. Rietveld analysis of the XRD data sh… ▽ More We report synthesis of Cd substituted ZnO nanostructures (Zn1-xCdxO with x upto \approx .09) by high pressure solution growth method. The synthesized nanostructures comprise of nanocrystals that are both particles (~ 10-15 nm) and rods which grow along (002) direction as established by Transmission electron microscope (TEM) and X-ray diffraction (XRD) analysis. Rietveld analysis of the XRD data shows monotonous increase of the unit cell volume with the increase of Cd concentration. The optical absorption as well as the photoluminescence (PL) shows red shift on Cd substitution. The line width of the PL spectrum is related to the strain inhomogenity and it peaks in the region where the CdO phase separates from the Zn1-xCdxO nanostructures. The time resolved photoemission showed a long lived (~10ns) component. We propose that the PL behavior of the Zn1-xCdxO is dominated by strain in the sample with the redshift of the PL linked to the expansion of the unit cell volume on Cd substitution. △ Less

Submitted 10 September, 2011; originally announced September 2011.

Journal ref: Nanotechnology 18, 115618 (2007)

Phonon dynamics of Zn(Mg,Cd)O alloy nanostructures and their phase segregation

Authors: Manoranjan Ghosh, Nita Dilawar, A. K. Bandyopadhyay, A. K. Raychaudhuri

Abstract: In this paper we report phonon dynamics in chemically synthesized Zn1- xMgxO (0\leqx\leq0.07) and Zn1-yCdyO (0\leqy\leq0.03) alloy nanostructures of sizes ~10 nm using non-resonant Raman and Fourier Transformed Infrared Spectroscopy (FTIR). Substitution by Mg makes the unit cell compact while Cd substitution leads to unit cell expansion. On alloying, both A1(LO) and E1(LO) mode of wurtzite ZnO sho… ▽ More In this paper we report phonon dynamics in chemically synthesized Zn1- xMgxO (0\leqx\leq0.07) and Zn1-yCdyO (0\leqy\leq0.03) alloy nanostructures of sizes ~10 nm using non-resonant Raman and Fourier Transformed Infrared Spectroscopy (FTIR). Substitution by Mg makes the unit cell compact while Cd substitution leads to unit cell expansion. On alloying, both A1(LO) and E1(LO) mode of wurtzite ZnO show blue shift for Zn1-xMgxO and red shift for Zn1-yCdyO alloy nanostructures due to mass defect and volume change induced by the impurity atoms. Significant shift has been observed in E1(LO) mode for Zn1-xMgxO (73 cm-1 for x = 0.07) and Zn1-yCdyO (17 cm-1 for y = 0.03) nanostructures. The variation in Zn(Mg,Cd)-O bond length determined from the blue (red) shift of IR bands on alloying with Mg (Cd) is consistent with their respective ionic sizes and the structural changes predicted by X-ray diffraction study. However, on progressive alloying one can detect phase segregation (due to presence of interstitial Mgand Cd ions) in the alloy nanostructures for relatively higher Mg and Cd concentrations. This is confirmed by the gradual absence of the characteristic IR and Raman bands of wurtzite ZnO near 400-600 cm-1 as well as by X-Ray and TEM studies. △ Less

Submitted 10 September, 2011; originally announced September 2011.

Journal ref: J. Appl. Phys. 106, 084306 (2009)

Structural and Optical properties of Zn(1-x)MgxO nanocrystals obtained by low temperature method

Authors: Manoranjan Ghosh, A. K. Raychaudhuri

Abstract: In this paper we report structural and optical properties of Magnesium substituted Zinc Oxide (Zn1-xMgxO) nanocrystals (~10-12nm) synthesized by low temperature route. In the low temperature synthesis route it was possible to reach x = 0.17 without segregation of Mg rich phase. The exact chemical composition has been established by quantitative analysis. Rietveld analysis of the XRD data confirms… ▽ More In this paper we report structural and optical properties of Magnesium substituted Zinc Oxide (Zn1-xMgxO) nanocrystals (~10-12nm) synthesized by low temperature route. In the low temperature synthesis route it was possible to reach x = 0.17 without segregation of Mg rich phase. The exact chemical composition has been established by quantitative analysis. Rietveld analysis of the XRD data confirms the Wurzite structure and a continuous compaction of the lattice (in particular the c-axis parameter) as x increases. There is an enhancement of the strain in the lattice as the Mg is substituted. The bandgap also gets enhanced as x is increased and reaches a value of 4eV for x = 0.17. From the TEM and the XRD data it has been concluded that when there is a phase segregation for x > 0.17, there is a shell of Mg(OH)2 on the ZnO. The absorption also shows persistence of the excitoinc absorption on Mg substitution. The nanocrystals show near band edge photo luminescence (PL) at room temperature which shows blue shift on Mg incorporation. In addition to the near band edge emission the ZnO and Zn1-xMg xO alloy nanocrystals show considerable emission in the blue-green region at wavelength of ~550 nm. We find that the relative intensity of the green emission increases with the Mg concentration for very low x (upto x = 0.05) and on further increase of the Mg concentration there is a sharp decrease of relative intensity of the green emission eventually leading to a complete quenching of blue emission. It is concluded that due to phase segregation (for x \geq 0.20), the formation of the shell of Mg(OH)2 on the ZnO leads to quenching of the green emission .However, this shell formation does not have much effect on the near band edge PL. △ Less

Submitted 10 September, 2011; originally announced September 2011.

Journal ref: J. Appl. Phys. 100, 034315 (2006)

Non-Gaussian resistance noise in the ferromagnetic insulating state of a hole doped manganite

Authors: Sudeshna Samanta, A. K. Raychaudhuri, Ya. M. Mukhovskii

Abstract: We report the observation of a large 1/f noise in the ferromagnetic insulating state (FMI) of a hole doped manganite single crystal of La0.80Ca0.20MnO3 which manifests hop** conductivity in presence of a Coulomb gap. The temperature dependent noise magnitude shows a deep within the FMI state, there is a sharp freeze out of the noise magnitude with temperature on cooling. As the material enters t… ▽ More We report the observation of a large 1/f noise in the ferromagnetic insulating state (FMI) of a hole doped manganite single crystal of La0.80Ca0.20MnO3 which manifests hop** conductivity in presence of a Coulomb gap. The temperature dependent noise magnitude shows a deep within the FMI state, there is a sharp freeze out of the noise magnitude with temperature on cooling. As the material enters the FMI state, the noise becomes non-Gaussian as seen through probability density function and second spectra. It is proposed to arise from charge fluctuations in a correlated glassy phase of the polaronic carriers which develop in these systems as reported in recent simulation studies. △ Less

Submitted 25 May, 2011; originally announced May 2011.

Voltage bias induced modification of all oxide Pr0.5Ca0.5MnO3/SrTi0.95Nb.05O3 junctions

Authors: Barnali Ghosh, K. Das, A. K. Raychaudhuri

Abstract: In this paper we report what happens to a pristine oxide junction Pr0.5Ca0.5MnO3/SrTi0.95Nb.05O3 (PCMO/Nb:STO), when it is subjected to cycling of voltage bias of moderate value ({\pm}4V). It is found that the initial cycling leads to formation of a permanent state of lower resistance where the lower resistance arises predominantly due to development of a shunt across the device film (PCMO). On su… ▽ More In this paper we report what happens to a pristine oxide junction Pr0.5Ca0.5MnO3/SrTi0.95Nb.05O3 (PCMO/Nb:STO), when it is subjected to cycling of voltage bias of moderate value ({\pm}4V). It is found that the initial cycling leads to formation of a permanent state of lower resistance where the lower resistance arises predominantly due to development of a shunt across the device film (PCMO). On successive voltage cycling with increasing magnitude, this state transforms into states of successive lower resistance that can be transformed back to the initial stable state on cycling to below a certain bias. A simple model based on p-n junction with shunt has been used to obtain information on the change of the junction on voltage cycling. It has been shown that the observation can be explained if the voltage cycling leads to lowering of barrier at the interface and also reduction in series resistance. It is suggested that this lowering can be related to the migration of oxygen ions and vacancies at the junction region. Cross-sectional imaging of the junction shows formation of permanent filamentary bridges across the thickness of the PCMO after the pristine p-n junction is first taken through a voltage cycle, which would explain appearance of a finite shunt across the p-n junction. △ Less

Submitted 4 March, 2011; originally announced March 2011.

Comments: 12 pages,7figures

Effect of size reduction on the ferromagnetism of the manganite La1-xCaxMnO3 (x = 0.33)

Authors: Tapati Sarkar, A. K. Raychaudhuri, A. K. Bera, S. M. Yusuf

Abstract: In this paper we report an investigation on the ferromagnetic state and the nature of ferromagnetic transition of nanoparticles of $\mathrm{La_{0.67}Ca_{0.33}MnO_3}$ using magnetic measurements and neutron diffraction. The investigation was made on nanoparticles with crystal size down to $15$ nm. The neutron data show that even down to a size of $15$ nm the nanoparticles show finite spontaneous ma… ▽ More In this paper we report an investigation on the ferromagnetic state and the nature of ferromagnetic transition of nanoparticles of $\mathrm{La_{0.67}Ca_{0.33}MnO_3}$ using magnetic measurements and neutron diffraction. The investigation was made on nanoparticles with crystal size down to $15$ nm. The neutron data show that even down to a size of $15$ nm the nanoparticles show finite spontaneous magnetization ($M_S$) although the value is much reduced compared to the bulk sample. We observed a non-monotonic variation of the ferromagnetic to paramagnetic transition temperature $T_C$ with size $d$ and found that $T_C$ initially enhances on size reduction, but for $d < 50$ nm it decreases again. The initial enhancement in $T_C$ was related to an increase in the bandwidth that occured due to a compaction of the Mn-O bond length and a straightening of the Mn-O-Mn bond angle, as determined form the neutron data. The size reduction also changes the nature of the ferromagnetic to paramagnetic transition from first order to second order with critical exponents approaching mean field values. This was explained as arising from a truncation of the coherence length by the finite sample size. △ Less

Submitted 3 January, 2011; originally announced January 2011.

Comments: 12 figures

Journal ref: New Journal of Physics, Vol. 12, Pg. 123026 (2010)

An SO(10) model with adjoint fermions for double seesaw neutrino masses

Authors: Joydeep Chakrabortty, Srubabati Goswami, Amitava Raychaudhuri

Abstract: An $SO(10)$ model where the $10_H$ and $120_H$ representations are used for generating fermion masses is quite predictive, though due to the absence of $SU(2)_{L,R}$ triplet/singlet fields it cannot give rise to neutrino masses through the usual type-I or type-II seesaw mechanisms. In this paper for neutrino masses we propose an extension of such an $SO(10)$ model by adding fermions in the adjoint… ▽ More An $SO(10)$ model where the $10_H$ and $120_H$ representations are used for generating fermion masses is quite predictive, though due to the absence of $SU(2)_{L,R}$ triplet/singlet fields it cannot give rise to neutrino masses through the usual type-I or type-II seesaw mechanisms. In this paper for neutrino masses we propose an extension of such an $SO(10)$ model by adding fermions in the adjoint representation (${45}_F$) and a symmetry breaking scalar $\bar{16}_H$. The $\bar{16}_H$ couples the adjoint fermions to the standard fermions in ${16}_F$ and induces neutrino masses through the `double seesaw' mechanism. In order to enhance the predictivity of the model we impose $μ-τ$ flavour symmetry on the Yukawa matrices for $10_H$ and $\bar{16}_H$ whereas for the $120_H$ it is assumed to be antisymmetric. We discuss the conditions that the mass matrices must obey so that the model can reproduce the tri-bimaximal mixing pattern. △ Less

Submitted 13 December, 2010; originally announced December 2010.

Comments: 13 pages, 1 figure

Single step precursor free synthesis and characterisation of stable Au nanochains by laser ablation

Authors: Rajesh Kumar Neogy, Rajib Nath, Gautam Basu, A. K. Raychaudhuri

Abstract: In this paper we report a simple one step and one-pot synthesis of stable assembly of Au nanoparticles (diameter 8-10nm) into chains in an Ethylene Glycol medium, using only a solid metallic Au target and a pulsed excimer laser (λ=248nm). The process reported does not use any precursor, reducing agent or surfactant and thus can be described as chemistry free synthesis route. The Au nanoparticle-et… ▽ More In this paper we report a simple one step and one-pot synthesis of stable assembly of Au nanoparticles (diameter 8-10nm) into chains in an Ethylene Glycol medium, using only a solid metallic Au target and a pulsed excimer laser (λ=248nm). The process reported does not use any precursor, reducing agent or surfactant and thus can be described as chemistry free synthesis route. The Au nanoparticle-ethylene glycol nanochains (with unbroken lengths often more than few microns) formed in liquid medium are mechanically as well as thermally stable and can be transferred unchanged into a solid substrate which can span a large surface area. The nanochains show a broad optical absorption covering almost the complete visible spectrum. A hybrid consisting of Au nanochains and separated nanoparticles can be formed by the same method using a proper choice of the laser fluence and Ethylene Glycol /DI water concentration. The Au nanochain - Ethylene Glycol hybrid material formed by the above method shows enhanced low frequency dielectric constant (one order more than the Ethylene Glycol) and enhanced electrical conductivity even with low Au fill fraction can show enhancement up to two orders. Based on 2D-NMR experiments we suggest that the quasi-1D chain like structure forms due to the formation of dimer and trimers of Ethylene Glycol molecules that attach to the Au nanoparticles formed by the ablation process and facilitate the chain formation. △ Less

Submitted 11 October, 2010; originally announced October 2010.

Comments: 20 pages, 7 figures, 2 supplementaries

Inverse see-saw, leptogenesis, observable proton decay and $Δ^{\pm\pm}_{\rm R}$ in SUSY SO(10) with heavy W_R

Authors: Mina K. Parida, Amitava Raychaudhuri

Abstract: We explore low-scale leptogenesis in a class of supersymmetric SO(10) models using extra singlet neutrinos and the Higgs representations {126}_H\oplus {\ovl{126}}_H as well as {16}_H \oplus {\bar {16}}_H. A singlet neutrino, which can be as light as 10^5-10^6 GeV, decays through its small mixings with right-handed neutrinos creating a lepton asymmetry which is shown to be flavor dependent. While t… ▽ More We explore low-scale leptogenesis in a class of supersymmetric SO(10) models using extra singlet neutrinos and the Higgs representations {126}_H\oplus {\ovl{126}}_H as well as {16}_H \oplus {\bar {16}}_H. A singlet neutrino, which can be as light as 10^5-10^6 GeV, decays through its small mixings with right-handed neutrinos creating a lepton asymmetry which is shown to be flavor dependent. While the doublet vacuum expectation value in {\ovl{16}}_H triggers the generation of desired mixings, it also induces a large RH triplet vev that breaks the LR intermediate gauge symmetry and gives large RH neutrino masses. Manifest unification of gauge couplings and generation of heavy RH neutrino masses are achieved by renormalizable interactions. The canonical (Type-I) see-saw contributions to the light neutrino mass matrix cancel out while the Type-II see-saw contribution is negligible. Determining the parameters of the dominant inverse see-saw formula using the underlying quark-lepton symmetry and neutrino oscillation data, we show how leptogenesis under the gravitino constraint is successfully implemented. New formulas for the decay rate and the asymmetry parameter are derived leading to baryon asymmetry within the observed range. The model is found to work for hierarchical as well as inverted hierarchical light neutrino masses. Testable predictions of the model are RH doubly charged Higgs bosons which may be leptophilic and accessible to the Tevatron, LHC or a linear collider. In a model-independent manner, the Drell-Yan pair production cross section is shown to be bounded between 59%-79% of their left-handed counterparts with same mass. In contrast to single-step breaking SUSY GUTs, which predict a long proton lifetime for p\to e^+π^0, here this lifetime is substantially reduced, bringing it within one order of the current experimental limit. △ Less

Submitted 14 December, 2010; v1 submitted 28 July, 2010; originally announced July 2010.

Comments: 24 pages, Latex, 2 figs, v2: published version

Journal ref: Phys.Rev.D82:093017,2010

Dimension-5 operators and the unification condition in SO(10) and E(6)

Authors: Joydeep Chakrabortty, Amitava Raychaudhuri

Abstract: Effective dimension-5 operators which modify the gauge kinetic term in Grand Unified Theories may arise as a consequence of quantum gravity or string compactification. We exhaustively calculate the modification of the gauge unification condition due to such operators for all viable rank-preserving symmetry breakings of SO(10) and E(6) grand unified models. Effective dimension-5 operators which modify the gauge kinetic term in Grand Unified Theories may arise as a consequence of quantum gravity or string compactification. We exhaustively calculate the modification of the gauge unification condition due to such operators for all viable rank-preserving symmetry breakings of SO(10) and E(6) grand unified models. △ Less

Submitted 7 June, 2010; originally announced June 2010.

Comments: 16 pages

Light neutrinos from massless texture and below TeV seesaw scale

Authors: Rathin Adhikari, Amitava Raychaudhuri

Abstract: We present general conditions on Dirac and Majorana mass terms under which a type-I seesaw mechanism can lead to three exactly massless neutrinos at the tree level. We depict several examples where the conditions are satisfied and relate some of them to an underlying U(1) symmetry. We show that higher order corrections may generate the small observed masses and this may be achieved even when the h… ▽ More We present general conditions on Dirac and Majorana mass terms under which a type-I seesaw mechanism can lead to three exactly massless neutrinos at the tree level. We depict several examples where the conditions are satisfied and relate some of them to an underlying U(1) symmetry. We show that higher order corrections may generate the small observed masses and this may be achieved even when the heavy Majorana neutrinos are at the electroweak scale or a little higher. △ Less

Submitted 7 August, 2011; v1 submitted 28 April, 2010; originally announced April 2010.

Comments: 15 pages, latex, 2 figure (ps), some modifications made

Journal ref: Phys.Rev.D84:033002,2011

GUTs with dim-5 interactions: Gauge Unification and Intermediate Scales

Authors: Joydeep Chakrabortty, Amitava Raychaudhuri

Abstract: Dimension-5 corrections to the gauge kinetic term of Grand Unified Theories (GUTs) may capture effects of quantum gravity or string compactification. Such operators modify the usual gauge coupling unification prediction in a calculable manner. Here we examine SU(5), SO(10), and E(6) GUTs in the light of all such permitted operators and calculate the impact on the intermediate scales and the unific… ▽ More Dimension-5 corrections to the gauge kinetic term of Grand Unified Theories (GUTs) may capture effects of quantum gravity or string compactification. Such operators modify the usual gauge coupling unification prediction in a calculable manner. Here we examine SU(5), SO(10), and E(6) GUTs in the light of all such permitted operators and calculate the impact on the intermediate scales and the unification programme. We show that in many cases at least one intermediate scale can be lowered to even 1-10 TeV, where a neutral Z' and possibly other states are expected. △ Less

Submitted 15 March, 2010; v1 submitted 22 September, 2009; originally announced September 2009.

Comments: 23 pages, 8 figures, 10 tables, Treatment of U(1) mixing effects corrected. Published version.

Journal ref: Phys.Rev.D81:055004,2010

Resistance fluctuations and 1/f noise in single crystalline Ni nanowires

Authors: Sudeshna Samanta, M. Venkata Kamalakar, A. K. Raychaudhuri

Abstract: We measured the low frequency (10mHz < f < 10Hz) resistance fluctuations (Noise) in single crystalline ferromagnetic Ni nanowires (diameter ~35nm) in the temperature range 80K-300K. The noise spectral power shows 1/f dependence. The nanowires in an applied magnetic field show negative magetoresistance that saturates for H <= HC. The noise spectral power shows a reduction in low applied field and… ▽ More We measured the low frequency (10mHz < f < 10Hz) resistance fluctuations (Noise) in single crystalline ferromagnetic Ni nanowires (diameter ~35nm) in the temperature range 80K-300K. The noise spectral power shows 1/f dependence. The nanowires in an applied magnetic field show negative magetoresistance that saturates for H <= HC. The noise spectral power shows a reduction in low applied field and becomes field independent for H >= HC. This indicates that a part of the observed 1/f noise arises from magnetic origin. The magnetic part is associated with thermally activated domain wall fluctuations that couples to the resistance fluctuations. △ Less

Submitted 23 June, 2009; originally announced June 2009.

Temperature dependent electrical resistivity of a single strand of ferromagnetic single crystalline nanowire

Authors: M. Venkata Kamalakar, A. K. Raychaudhuri, Xueyong Wei, Jason Teng, Philip D. Prewett

Abstract: We have measured the electrical resistivity of a single strand of a ferromagnetic Ni nanowire of diameter 55 nm using a 4-probe method in the temperature range 3 K-300 K. The wire used is chemically pure and is a high quality oriented single crystalline sample in which the temperature independent residual resistivity is determined predominantly by surface scattering. Precise evaluation of the te… ▽ More We have measured the electrical resistivity of a single strand of a ferromagnetic Ni nanowire of diameter 55 nm using a 4-probe method in the temperature range 3 K-300 K. The wire used is chemically pure and is a high quality oriented single crystalline sample in which the temperature independent residual resistivity is determined predominantly by surface scattering. Precise evaluation of the temperature dependent resistivity ($ρ$) allowed us to identify quantitatively the electron-phonon contribution (characterized by a Debye temperature $θ_R$) as well as the spin-wave contribution which is significantly suppressed upon size reduction. △ Less

Submitted 21 June, 2009; originally announced June 2009.

Exploring the Universal Extra Dimension at the LHC

Authors: Gautam Bhattacharyya, Anindya Datta, Swarup Kumar Majee, Amitava Raychaudhuri

Abstract: Besides supersymmetry, the other prime candidate of physics beyond the standard model (SM), crying out for verification at the CERN Large Hadron Collider (LHC), is extra-dimension. To hunt for effects of Kaluza-Klein (KK) excitations of known fermions and bosons is very much in the agenda of the LHC. These KK states arise when the SM particles penetrate in the extra space-like dimension(s). In t… ▽ More Besides supersymmetry, the other prime candidate of physics beyond the standard model (SM), crying out for verification at the CERN Large Hadron Collider (LHC), is extra-dimension. To hunt for effects of Kaluza-Klein (KK) excitations of known fermions and bosons is very much in the agenda of the LHC. These KK states arise when the SM particles penetrate in the extra space-like dimension(s). In this paper, we consider a 5d scenario, called `Universal Extra Dimension', where the extra space coordinate, compactified on an orbifold $S^1/Z_2$, is accessed by {\em all} the particles. The KK number ($n$) is conserved at all tree level vertices. This entails the production of KK states in pairs and renders the lightest KK particle stable, which leaves the detector carrying away missing energy. The splitting between different KK flavors is controlled by the zero mode masses and the bulk- and brane-induced one-loop radiative corrections. We concentrate on the production of an $n=1$ KK electroweak gauge boson in association with an $n=1$ KK quark. This leads to a signal consisting of {\em only one} jet, one or more leptons and missing $p_T$. For definiteness we usually choose the inverse radius of compactification to be $R^{-1} = 500$ GeV, which sets the scale of the lowest lying KK states. We show on a case-by-case basis (depending on the number of leptons in the final state) that with 10 ${\rm fb}^{-1}$ integrated luminosity at the LHC with $\sqrt{s}$ = 14 TeV this signal can be detected over the SM background by imposing appropriate kinematic cuts. We record some of the expectations for a possible intermediate LHC run at $\sqrt{s}$ = 10 TeV and also exhibit the integrated luminosity required to obtain a 5$σ$ signal as a function of $R^{-1}$. △ Less

Submitted 12 June, 2009; v1 submitted 6 April, 2009; originally announced April 2009.

Comments: 17 pages, 3 figs; v2: minor changes in text, one footnote and reference added, to appear in Nucl. Phys. B

Report number: SINP/TNP/09-17, CU-Physics-05/2009, CP3-09-13, HRI-P-09-03-002, RECAPP-HRI-2009-011

Journal ref: Nucl.Phys.B821:48-64,2009