-
Impact of a Cold Control Plate on Fluid Flow and Heat Transfer across an Isothermally Heated Rotary Oscillating Circular Cylinder
Authors:
Amarjit Haty,
Rajendra K. Ray,
H. V. R. Mittal
Abstract:
The main objective of this paper is to study the effect of a cold, vertical, arc-shaped control plate on the flow characteristics and forced convective heat transfer mechanism across a rotary oscillating, isothermally heated circular cylinder. Two-dimensional, unsteady, incompressible, laminar, and viscous flow of a Newtonian, constant property fluid is considered across the cylinder. The simulati…
▽ More
The main objective of this paper is to study the effect of a cold, vertical, arc-shaped control plate on the flow characteristics and forced convective heat transfer mechanism across a rotary oscillating, isothermally heated circular cylinder. Two-dimensional, unsteady, incompressible, laminar, and viscous flow of a Newtonian, constant property fluid is considered across the cylinder. The simulations are performed with an in-house code for various gap ratios between the control plate and the cylinder ($0\leq d/R_0 \leq 3$), maximum angular velocity ($0.5\leq α_m \leq 4$) and frequency ratio of oscillation ($f/f_0=0.5,\ 3$) at Prandtl number $0.7$ and Reynolds number $150$. Here, $d$ denotes the gap between the surface of the cylinder and the leading surface of the control plate, $R_0$ denotes the radius of the cylinder, $f$ is the frequency of oscillation and $f_0$ is the frequency of natural vortex shedding. $d/R_0=0$ corresponds to the no plate case. Heat transfer and vortex shedding phenomena are discussed in relation to one another. A significant increase in heat transmission is observed for all $α_m$ with the gap ratio of $d/R_0=0.5$ and $f/f_0=0.5$. The heat absorption on the surface of the control plate decreases to zero with increasing gap ratio when $α_m=0.5$ and $f/f_0=0.5$ but never becomes zero when $α_m=4$ and $f/f_0=3$. Additionally, when compared to the no plate case with $(α_m,\ f/f_0)=(0.5,\ 0.5)$, the maximum peak of the drag coefficient is decreased by $9.877\%$ for the gap ratio of $d/R_0=3$. For $α_m=4$ and $f/f_0=3$, the smallest gap ratio of $d/R_0=0.5$ is found to significantly increase the lift coefficient relative to other cases.
△ Less
Submitted 2 February, 2023;
originally announced February 2023.
-
Impact of an Arc-shaped Control Plate on Flow and Heat Transfer around a Isothermally Heated Rotating Circular Cylinder
Authors:
Amarjit Haty,
Rajendra K. Ray
Abstract:
The main objective of this paper is to study the flow characteristics of a rotating, isothermally heated circular cylinder with a vertical arc-shaped control plate placed downstream. Stream function-Vorticity ($ψ-ω$) formulation of two dimensional (2-D) Navier-Stokes (N-S) equations is considered as the governing equation and the simulations are performed for different distances of the control pla…
▽ More
The main objective of this paper is to study the flow characteristics of a rotating, isothermally heated circular cylinder with a vertical arc-shaped control plate placed downstream. Stream function-Vorticity ($ψ-ω$) formulation of two dimensional (2-D) Navier-Stokes (N-S) equations is considered as the governing equation and the simulations are performed for different distances of the control plate ($0.5$, $1$, $2$, $3$), rotational rates ($0.5$, $1$, $2.07$, $3.25$) at Prandtl number $0.7$ and Reynolds number $150$. The governing equations are discretized using the Higher Order Compact (HOC) scheme and the system of algebraic equations, arising from HOC discretization, is solved using the Bi-Conjugate Gradient Stabilized approach. Present computed results show that the vortex shedding plane is shifted upward from the centerline of the flow domain by the cylinder's rotational motion. The structure of the wake varies based on the plate's position. The size of vortices is greatly reduced when the control plate is set at $d/R_0=3$ and the rotational rate is very high. At greater rotational rates, the impact of varied positions of the arc-shaped control plate is very significant. The rotation of the cylinder and the location of the plate can be used to lower or enhance the values of drag and lift coefficients as well as the heat transfer from the surface of the cylinder. The maximum value of the drag coefficient, which is about $3$, is achieved for $d/R_0=2$ and $α=3.25$.
△ Less
Submitted 31 January, 2023;
originally announced January 2023.
-
No-signaling in Nonlinear Extensions of Quantum Mechanics
Authors:
Rohit Kishan Ray,
Gian Paolo Beretta
Abstract:
Devising a nonlinear extension of quantum mechanics is nontrivial because unphysical features such as supraluminal communication (signaling) are to be excluded. In this Letter, we show that the steepest entropy ascent formalism is a viable no-signaling extension belonging to a broader class of no-signaling nonlinear evolution equations for which the local evolution of a subsystem is not necessaril…
▽ More
Devising a nonlinear extension of quantum mechanics is nontrivial because unphysical features such as supraluminal communication (signaling) are to be excluded. In this Letter, we show that the steepest entropy ascent formalism is a viable no-signaling extension belonging to a broader class of no-signaling nonlinear evolution equations for which the local evolution of a subsystem is not necessarily bound to depend only on its reduced state. We prove that, in addition to the local reduced density operator, there is a broad class of local operators called `local perceptions', which are insensitive to unitary operations localized within other non-interacting systems.
△ Less
Submitted 26 July, 2023; v1 submitted 27 January, 2023;
originally announced January 2023.
-
Mathematical Modelling of Streamwise Velocity Profile in Open Channels Using Tsallis Entropy
Authors:
Manotosh Kumbhakar,
Rajendra K. Ray,
Suvra Kanti Chakraborty,
Koeli Ghoshal,
Vijay P. Singh
Abstract:
This study derived the vertical distribution of streamwise velocity in wide open channels by maximizing Tsallis entropy, in accordance with the maximum entropy principle, subject to the total probability rule and the conservation of mass, momentum, and energy. Entropy maximizing leads to a highly nonlinear differential equation for velocity which was transformed into a relatively weaker nonlinear…
▽ More
This study derived the vertical distribution of streamwise velocity in wide open channels by maximizing Tsallis entropy, in accordance with the maximum entropy principle, subject to the total probability rule and the conservation of mass, momentum, and energy. Entropy maximizing leads to a highly nonlinear differential equation for velocity which was transformed into a relatively weaker nonlinear equation and then solved analytically using a non-perturbation approach that yielded a series solution. The convergence of the series solution was proved using both theoretical and numerical procedures. For the assessment of velocity profile, the Lagrange multipliers and the entropy index were obtained by solving a system of nonlinear equations by Gauss-Newton method after approximating the constraint integrals using Gauss-Legendre quadrature rule. The derived velocity profile was validated for some selected sets of experimental and field data and also compared with the existing velocity profile based on Tsallis entropy. The incorporation of the above constraints and the effect of entropy index were found to improve the velocity profile for experimental as well as field data. The methodology reported in this study can also be employed for addressing other open channel flow problems, such as sediment concentration and shear stress distribution.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
On the Role of Tsallis Entropy Index for Velocity Modelling in Open Channels
Authors:
Manotosh Kumbhakar,
Rajendra K. Ray,
Koeli Ghoshal,
Vijay P. Singh
Abstract:
Following the work on Shannon entropy together with the principle of maximum entropy, Luo & Singh (J. Hydrol. Eng., 2011, 16(4): 303-315) and Singh & Luo (J. Hydrol. Eng., 2011, 16(9): 725-735) explored the concept of non-extensive Tsallis entropy for modelling velocity in open channels. Later, the idea was extended by Cui & Singh (J. Hydrol. Eng., 2013, 18(3): 331-339; 2014, 19(2): 290-298) by hy…
▽ More
Following the work on Shannon entropy together with the principle of maximum entropy, Luo & Singh (J. Hydrol. Eng., 2011, 16(4): 303-315) and Singh & Luo (J. Hydrol. Eng., 2011, 16(9): 725-735) explored the concept of non-extensive Tsallis entropy for modelling velocity in open channels. Later, the idea was extended by Cui & Singh (J. Hydrol. Eng., 2013, 18(3): 331-339; 2014, 19(2): 290-298) by hypothesizing an accurate cumulative distribution function (CDF). However, these studies estimated the entropy index through a data-fitting procedure and the values of the index were different for different studies. The present study investigates the role of Tsallis entropy index for modelling velocity in open channels using the method of moments, based on conservation of mass and momentum. It is found that the entropy index depends on the normalized mean velocity and the momentum coefficient. In addition to the physical meaning of the index, it is also found that the modified velocity profile significantly improves for both wide and narrow channels, as shown by small predicted velocity errors. The proposed approach may be further employed for other open channel flow problems, such as sediment concentration, and shear stress distribution.
△ Less
Submitted 25 October, 2019;
originally announced October 2019.
-
On the Development of a Coupled Non-linear Telegraph-Diffusion Model for Image Restoration
Authors:
Sudeb Majee,
Subit K. Jain,
Rajendra K. Ray,
Ananta K. Majee
Abstract:
In this work, we propose a telegraph coupled partial differential equation (TCPDE) based model for image restoration. New framework interpolates between a couple of non-linear telegraph equation and a parabolic equation. Proposed strategy can be applied to significantly preserve the oscillatory and texture pattern in an image, even in low signal-to-noise ratio. First, we prove that the present mod…
▽ More
In this work, we propose a telegraph coupled partial differential equation (TCPDE) based model for image restoration. New framework interpolates between a couple of non-linear telegraph equation and a parabolic equation. Proposed strategy can be applied to significantly preserve the oscillatory and texture pattern in an image, even in low signal-to-noise ratio. First, we prove that the present model has a unique global weak solution using Banach's fixed point theorem. Then apply our model over a set of gray-level images to illustrate the superiority of the proposed model over the recently developed hyperbolic-parabolic PDE based models as well as coupled diffusion-based model.
△ Less
Submitted 11 September, 2019; v1 submitted 30 August, 2019;
originally announced August 2019.
-
Well-posedness study of a non-linear hyperbolic-parabolic coupled system applied to image speckle reduction
Authors:
Sudeb Majee,
Rajendra K. Ray,
Ananta K. Majee
Abstract:
In this article, we consider a non-linear hyperbolic-parabolic coupled system based on telegraph diffusion framework applied to image despeckling. A separate equation is used to calculate the edge variable, which improves the quality of the despeckled images. A well-posedness result of the proposed coupled system is settled via Schauder's fixed point theorem. Numerical experiments are reported to…
▽ More
In this article, we consider a non-linear hyperbolic-parabolic coupled system based on telegraph diffusion framework applied to image despeckling. A separate equation is used to calculate the edge variable, which improves the quality of the despeckled images. A well-posedness result of the proposed coupled system is settled via Schauder's fixed point theorem. Numerical experiments are reported to illustrate the effectiveness of the proposed model, with recently developed models, over a set of gray level test images contaminated by speckle noise.
△ Less
Submitted 11 August, 2019; v1 submitted 7 August, 2019;
originally announced August 2019.
-
A Gray Level Indicator-Based Regularized Telegraph Diffusion Equation Applied to Image Despeckling
Authors:
Sudeb Majee,
Rajendra K Ray,
Ananta K Majee
Abstract:
In this work, a gray level indicator based non-linear telegraph diffusion model is presented for multiplicative noise removal problem. Most of the researchers focus only on diffusion equation-based model for multiplicative noise removal problem. The suggested model uses the benefit of the combined effect of diffusion equation as well as the wave equation. Wave nature of the model preserves the hig…
▽ More
In this work, a gray level indicator based non-linear telegraph diffusion model is presented for multiplicative noise removal problem. Most of the researchers focus only on diffusion equation-based model for multiplicative noise removal problem. The suggested model uses the benefit of the combined effect of diffusion equation as well as the wave equation. Wave nature of the model preserves the high oscillatory and texture pattern in an image. In this model, the diffusion coefficient depends not only on the image gradient but also on the gray level of the image, which controls the diffusion process better than only gradient-based diffusion models. Moreover, we prove the well-posedness of the present model using Schauder fixed point theorem. Furthermore, we show the superiority of the proposed model over a recently developed method on a set of gray level test images which are corrupted by speckle noise.
△ Less
Submitted 6 August, 2019; v1 submitted 3 August, 2019;
originally announced August 2019.
-
A Fuzzy Edge Detector Driven Telegraph Total Variation Model For Image Despeckling
Authors:
Sudeb Majee,
Subit K Jain,
Rajendra K Ray,
Ananta K Majee
Abstract:
Speckle noise suppression is a challenging and crucial pre-processing stage for higher-level image analysis. In this work, a new attempt has been made using telegraph total variation equation and fuzzy set theory for speckle noise suppression. The intuitionistic fuzzy divergence (IFD) function has been used to distinguish between edges and noise. To the best of the author's knowledge, most of the…
▽ More
Speckle noise suppression is a challenging and crucial pre-processing stage for higher-level image analysis. In this work, a new attempt has been made using telegraph total variation equation and fuzzy set theory for speckle noise suppression. The intuitionistic fuzzy divergence (IFD) function has been used to distinguish between edges and noise. To the best of the author's knowledge, most of the studies on multiplicative speckle noise removal process focus on only diffusion-based filters, and little attention has been paid to the study of fuzzy set theory. The proposed approach enjoy the benefits of both telegraph total variation equation and fuzzy edge detector, which is not only robust to noise but also preserves image structural details. Moreover, we establish the existence and uniqueness of a weak solution of the regularized version of the proposed model using Schauder fixed point theorem. With the proposed model, despeckling is carried out on natural and Synthetic Aperture Radar (SAR) images. The experimental results of the proposed model are reported, which found better in terms of noise suppression and detail/edge preservation, with respect to the existing approaches.
△ Less
Submitted 5 August, 2019; v1 submitted 3 August, 2019;
originally announced August 2019.
-
Steepest Entropy Ascent Solution for a Continuous-Time Quantum Walker
Authors:
Rohit Kishan Ray
Abstract:
We consider the steepest entropy ascent (SEA) ansatz to describe the non-linear thermodynamic evolution of a quantum system. Recently this principle has been dubbed the fourth law of thermodynamics (Beretta Gian Paolo. 2020 The fourth law of thermodynamics: steepest entropy ascent). A unique global equilibrium state exists in this context, and any other state is driven by the maximum entropy gener…
▽ More
We consider the steepest entropy ascent (SEA) ansatz to describe the non-linear thermodynamic evolution of a quantum system. Recently this principle has been dubbed the fourth law of thermodynamics (Beretta Gian Paolo. 2020 The fourth law of thermodynamics: steepest entropy ascent). A unique global equilibrium state exists in this context, and any other state is driven by the maximum entropy generation principle towards this equilibrium. We study the SEA evolution of a continuous-time quantum walker (CTQW) on a cycle graph with N nodes. SEA solutions are difficult to find analytically. We provide an approximate scheme to find a general single-particle evolution equation governed by the SEA principle, whose solution produces dissipation dynamics. We call this scheme fixed Lagrange's multiplier (FLM) method. In the Bloch sphere representation, we find trajectories traced out by the Bloch vector within the sphere itself. We have discussed these trajectories under various initial conditions for the case of a qubit. A similar dissipative motion is also observed in the case of CTQW, where probability amplitudes have been used to characterize decoherence. Our FLM scheme shows good agreement with numerical results. As reported in the text, in CTQW, a strong delocalization exists for low system relaxation time.
△ Less
Submitted 27 July, 2022; v1 submitted 10 July, 2019;
originally announced July 2019.
-
Analysis and Simulation of a Coupled Diffusion based Image Denoising Model
Authors:
Subit K. Jain,
Sudeb Majee,
Rajendra K. Ray,
Ananta K. Majee
Abstract:
In this study, a new coupled Partial Differential Equation (CPDE) based image denoising model incorporating space-time regularization into non-linear diffusion is proposed. This proposed model is fitted with additive Gaussian noise which performs efficient image smoothing along with the preservation of edges and fine structures. For this purpose, we propose a new functional minimization framework…
▽ More
In this study, a new coupled Partial Differential Equation (CPDE) based image denoising model incorporating space-time regularization into non-linear diffusion is proposed. This proposed model is fitted with additive Gaussian noise which performs efficient image smoothing along with the preservation of edges and fine structures. For this purpose, we propose a new functional minimization framework to remove the image noise, which results in solving a system of three partial differential equations (PDEs). Our proposed model is dissimilar from the existing CPDE models as it includes two additional evolution equations to handle edge strength function and data fidelity term. These two evolution equations control the smoothing process and force the resultant denoised solution to be close to the initial solution. To the best of our knowledge, the proposed model is the only work, which deciphers the combined effect of both the terms using separate PDEs. Furthermore, we establish the existence and uniqueness of a weak solution of the proposed system using the time discretization method with $H^1$ initial data. Finally, we used a generalized weighted average finite difference scheme to efficiently solve the coupled system and experiment results show the effectiveness of the proposed CPDE model.
△ Less
Submitted 7 August, 2019; v1 submitted 10 July, 2019;
originally announced July 2019.
