Showing 1–7 of 7 results for author: Ravazzoli, P D

Equilibrium solutions of a sessile drop partially covered by another liquid

Authors: Pablo D. Ravazzoli, Alejandro G. González, Javier A. Diez

Abstract: We study the equilibrium solutions of a sessile drop on top of a horizontal substrate when it is partially covered by another inmiscible liquid, so that part of the drop is in contact with a third fluid (typically, air). The shapes of the interfaces are obtained by numerical integration of the differential equations resulting from the application of the Neumann's and Young's laws at the three flui… ▽ More We study the equilibrium solutions of a sessile drop on top of a horizontal substrate when it is partially covered by another inmiscible liquid, so that part of the drop is in contact with a third fluid (typically, air). The shapes of the interfaces are obtained by numerical integration of the differential equations resulting from the application of the Neumann's and Young's laws at the three fluids junction (triple point) and the two fluids--solid contact line (at the substrate), as well as no--flow boundary conditions at the wall of the container under axial symmetry. The formulation shows that the solutions are parametrized by four dimensionless variables, which stand for: i) the volume of the external liquid in the container, ii) two ratios of interfacial tensions, and iii) the contact angle of the liquid drop at the substrate. In this parameters space, we find solutions that consist of three interfaces: one which connects the substrate with the triple point, and two that connect this point with the symmetry axis and the wall. We find that the shape of the first interface strongly depend on the height of the external liquid, while the contact angle and the two ratios of surface tensions do not introduce qualitative changes. In particular, the solution can show one or more necks, or even no neck at all, depending on the value of the effective height of the external fluid. An energetic analysis allows to predict the breakups of the necks, which could give place to separated systems formed by a sessile drop and a floating lens, plus eventual spherical droplets in between (depending on the number of breakups). △ Less

Submitted 10 November, 2022; originally announced November 2022.

Buoyancy and capillary effects on floating liquid lenses

Authors: P. D. Ravazzoli, A. G. González, J. A. Diez, H. A. Stone

Abstract: We study the equilibrium shape of a liquid drop resting on top of a liquid surface, i.e., a floating lens. We consider the surface tension forces in non--wetting situations (negative spreading factor), as well as the effects of gravity. We obtain analytical expressions for the drop shape when gravity can be neglected. Perhaps surprisingly, when including gravity in the analysis, we find two differ… ▽ More We study the equilibrium shape of a liquid drop resting on top of a liquid surface, i.e., a floating lens. We consider the surface tension forces in non--wetting situations (negative spreading factor), as well as the effects of gravity. We obtain analytical expressions for the drop shape when gravity can be neglected. Perhaps surprisingly, when including gravity in the analysis, we find two different families of equilibrium solutions for the same set of physical parameters. These solutions correspond to drops whose center of mass is above or below the level of the external liquid surface. By means of energetic considerations we determine the family that has the smallest energy, and therefore is the most probable to be found in nature. A detailed explanation of the geometrical differences between the both types of solutions is provided. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Comments: 15 pages, 14 figures

Journal ref: Phys. Rev. Fluids 5, 073604 (2020)

Contact angle hysteresis effects on a drop sitting on an incline plane

Authors: Pablo D. Ravazzoli, Ingrith Cuellar, Alejandro G. González, Javier A. Diez

Abstract: We study the contact angle hysteresis and morphology changes of a liquid drop sitting on a solid substrate inclined with respect to the horizontal at an angle $α$. This one is always smaller than the critical one, $α_{crit}$, above which the drop would start to slide down. The hysteresis cycle is performed for positive and negative $α$'s ($|α|<α_{crit}$), and a complete study of the changes in con… ▽ More We study the contact angle hysteresis and morphology changes of a liquid drop sitting on a solid substrate inclined with respect to the horizontal at an angle $α$. This one is always smaller than the critical one, $α_{crit}$, above which the drop would start to slide down. The hysteresis cycle is performed for positive and negative $α$'s ($|α|<α_{crit}$), and a complete study of the changes in contact angles, free surface and footprint shape is carried out. The drop shape is analyzed in terms of a solution of the equilibrium pressure equation within and out of the long--wave model (lubrication approximation). Within this approximation, we obtain a truncated analytical solution that describes the static drop shapes, that is successfully compared with experimental data. This solution is of practical interest since it allows for a complete description of all the drop features, such as its footprint shape or contact angle distribution around the drop periphery, starting from a very small set of relatively easy to measure drop parameters. △ Less

Submitted 28 September, 2018; originally announced September 2018.

Comments: 16 pages, 18 figures

Journal ref: Phys. Rev. E 99, 043105 (2019)

Self-assembly of a drop pattern from a two-dimensional grid of nanometric metallic filaments

Authors: Ingrith Cuellar, Pablo D. Ravazzoli, Javier A. Diez, Alejandro G. González, Nicholas A. Roberts, Jason D. Fowlkes, Philip D. Rack, Lou Kondic

Abstract: We report experiments, modeling and numerical simulations of the self--assembly of particle patterns obtained from a nanometric metallic square grid. Initially, nickel filaments of rectangular cross section are patterned on a SiO$_2$ flat surface, and then they are melted by laser irradiation with $\sim 20$ ns pulses. During this time, the liquefied metal dewets the substrate, leading to a linear… ▽ More We report experiments, modeling and numerical simulations of the self--assembly of particle patterns obtained from a nanometric metallic square grid. Initially, nickel filaments of rectangular cross section are patterned on a SiO$_2$ flat surface, and then they are melted by laser irradiation with $\sim 20$ ns pulses. During this time, the liquefied metal dewets the substrate, leading to a linear array of drops along each side of the squares. The experimental data provides a series of SEM images of the resultant morphology as a function of the number of laser pulses or cumulative liquid lifetime. These data are analyzed in terms of fluid mechanical models that account for mass conservation and consider flow evolution with the aim to predict the final number of drops resulting from each side of the square. The aspect ratio, $δ$, between the square sides' lengths and their widths is an essential parameter of the problem. Our models allow us to predict the $δ$-intervals within which a certain final number of drops are expected. The comparison with experimental data shows a good agreement with the model that explicitly considers the Stokes flow developed in the filaments neck region that lead to breakup points. Also, numerical simulations, that solve the Navier-Stokes equations along with slip boundary condition at the contact lines, are implemented to describe the dynamics of the problem. △ Less

Submitted 28 May, 2018; v1 submitted 18 May, 2018; originally announced May 2018.

Journal ref: Phys. Rev. E 98, 043101 (2018)

Drop pattern resulting from the breakup of a bidimensional grid of liquid filaments

Authors: Ingrith Cuellar, Pablo D. Ravazzoli, Javier A. Diez, Alejandro G. González

Abstract: A rectangular grid formed by liquid filaments on a partially wetting substrate evolves in a series of breakups leading to arrays of drops with different shapes distributed in a rather regular bidimensional pattern. Our study is focused on the configuration produced when two long parallel filaments of silicone oil, which are placed upon a glass substrate previously coated with a fluorinated solutio… ▽ More A rectangular grid formed by liquid filaments on a partially wetting substrate evolves in a series of breakups leading to arrays of drops with different shapes distributed in a rather regular bidimensional pattern. Our study is focused on the configuration produced when two long parallel filaments of silicone oil, which are placed upon a glass substrate previously coated with a fluorinated solution, are crossed perpendicularly by another pair of long parallel filaments. A remarkable feature of this kind of grids is that there are two qualitatively different types of drops. While one set is formed at the crossing points, the rest are consequence of the breakup of shorter filaments formed between the crossings. Here, we analyze the main geometric features of all types of drops, such as shape of the footprint and contact angle distribution along the drop periphery. The formation of a series of short filaments with similar geometric and physical properties allows us to have simultaneously quasi identical experiments to study the subsequent breakups. We develop a simple hydrodynamic model to predict the number of drops that results from a filament of given initial length and width. This model is able to yield the length intervals corresponding to a small number of drops and its predictions are successfully compared with the experimental data as well as with numerical simulations of the full Navier--Stokes equation that provide a detailed time evolution of the dewetting motion of the filament till the breakup into drops. Finally, the prediction for finite filaments is contrasted with the existing theories for infinite ones. △ Less

Submitted 30 May, 2017; originally announced May 2017.

Wetting and dewetting processes in the axial retraction of liquid filaments

Authors: Pablo D. Ravazzoli, Ingrith P. Cuellar, Alejandro G. González, Javier A. Diez

Abstract: We study the hydrodynamic mechanisms involved in the motion of the contact line formed at the end region of a liquid filament laying on a planar and horizontal substrate. Since the flow develops under partially wetting conditions, the tip of the filament recedes and forms a bulged region (head), that subsequently develops a neck region behind it. Later on, the neck breaks up leading to a separated… ▽ More We study the hydrodynamic mechanisms involved in the motion of the contact line formed at the end region of a liquid filament laying on a planar and horizontal substrate. Since the flow develops under partially wetting conditions, the tip of the filament recedes and forms a bulged region (head), that subsequently develops a neck region behind it. Later on, the neck breaks up leading to a separated drop, while the rest of the filament restarts the sequence. One main feature of this flow is that the whole dynamics and final drop shapes are strongly influenced by the hysteresis of the contact angle typical in most of the liquid/substrate systems. The time evolution till breakup is studied experimentally and pictured in terms of a hybrid wettability theory which involves the Cox-Voinov hydrodynamic approach combined with the molecular kinetic theory developed by Blake. The parameters of this theory are determined for our liquid/substrate system (silicon oil / coated glass). The experimental results of the retracting filament are described in terms of a simple heuristic model, and also compared with numerical simulations of the full Navier-Stokes equations. This study is of special interest in the context of pulsed laser induce dewetting (PLiD). △ Less

Submitted 15 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. E 95, 053111 (2017)

Drops with non-circular footprints

Authors: Pablo D. Ravazzoli, Alejandro G. González, Javier A. Diez

Abstract: In this paper we study the morphology of drops formed on partially wetting substrates, whose footprint is not circular. This type of drops is a consequence of the breakup processes occurring in thin films when anisotropic contact line motions take place. The anisotropy is basically due to hysteresis effects of the contact angle since some parts of the contact line are wetting, while others are dew… ▽ More In this paper we study the morphology of drops formed on partially wetting substrates, whose footprint is not circular. This type of drops is a consequence of the breakup processes occurring in thin films when anisotropic contact line motions take place. The anisotropy is basically due to hysteresis effects of the contact angle since some parts of the contact line are wetting, while others are dewetting. Here, we obtain a peculiar drop shape from the rupture of a long liquid filament sitting on a solid substrate, and analyze its shape and contact angles by means of goniometric and refractive techniques. We also find a non--trivial steady state solution for the drop shape within the long wave approximation (lubrication theory), and compare most of its features with experimental data. This solution is presented both in Cartesian and polar coordinates, whose constants must be determined by a certain group of measured parameters. Besides, we obtain the dynamics of the drop generation from numerical simulations of the full Navier--Stokes equation, where we emulate the hysteretic effects with an appropriate spatial distribution of the static contact angle over the substrate. △ Less

Submitted 15 December, 2015; originally announced December 2015.