-
Asgard/NOTT: First lab assembly and experimental results
Authors:
G. Garreau,
A. Bigioli,
R. Laugier,
B. La Torre,
M-A. Martinod,
K. Missiaen,
J. Morren,
G. Raskin,
M. Salman,
S. Gross,
M. Ireland,
A. P. Joó,
L. Labadie,
S. Madden,
A. Mazzoli,
G. Medgyesi,
A. Sanny,
A. Taras,
B. Vandenbussche,
D. Defrère
Abstract:
Asgard/NOTT is an ERC-funded project hosted at KU Leuven and is part of a new visitor instrumental suite, called Asgard, under preparation for the Very Large Telescope Interferometer (VLTI). Leveraging nulling capabilities and the long VLTI baselines, it is optimized for high-contrast imaging of the snow line region around young nearby main-sequence stars. This will enable the characterization of…
▽ More
Asgard/NOTT is an ERC-funded project hosted at KU Leuven and is part of a new visitor instrumental suite, called Asgard, under preparation for the Very Large Telescope Interferometer (VLTI). Leveraging nulling capabilities and the long VLTI baselines, it is optimized for high-contrast imaging of the snow line region around young nearby main-sequence stars. This will enable the characterization of the atmosphere of young giant exoplanets and warm/hot exozodiacal dust with spectroscopy in the L'-band (3.5-4.0$μ$m). In this work, we present the first lab assembly of the instrument done at KU Leuven and the technical solutions to tackle the challenge of performing nulling in the mid-infrared despite the thermal background. The opto-mechanical design of the warm optics and the injection system for the photonic chip are described. The alignment procedure used to assemble the system is also presented. Finally, the first experimental results, including fringes and null measurements, are given and confirm the adequacy of the bench to test and optimize the Asgard/NOTT instrument.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans
Authors:
Marc-Antoine Martinod,
Denis Defrère,
Michael J. Ireland,
Stefan Kraus,
Frantz Martinache,
Peter G. Tuthill,
Fatmé Allouche,
Emilie Bouzerand,
Julia Bryant,
Josh Carter,
Sorabh Chhabra,
Benjamin Courtney-Barrer,
Fred Crous,
Nick Cvetojevic,
Colin Dandumont,
Steve Ertel,
Tyler Gardner,
Germain Garreau,
Adrian M. Glauser,
Xavier Haubois,
Lucas Labadie,
Stéphane Lagarde,
Daniel Lancaster,
Romain Laugier,
Alexandra Mazzoli
, et al. (13 additional authors not shown)
Abstract:
ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating…
▽ More
ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
L-band nulling interferometry at the VLTI with Asgard/NOTT: status and plans
Authors:
Denis Defrère,
Romain Laugier,
Marc-Antoine Martinod,
Germain Garreau,
Kwinten Missiaen,
Muhammad Salman,
Gert Raskin,
Colin Dandumont,
Steve Ertel,
Michael J. Ireland,
Stefan Kraus,
Lucas Labadie,
Alexandra Mazzoli,
Gyorgy Medgyesi,
Ahmed Sanny,
Olivier Absil,
Peter Ábráham,
Jean-Philippe Berger,
Myriam Bonduelle,
Azzurra Bigioli,
Emilie Bouzerand,
Josh Carter,
Nick Cvetojevic,
Benjamin Courtney-Barrer,
Adrian M. Glauser
, et al. (21 additional authors not shown)
Abstract:
NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting…
▽ More
NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting exozodiacal dust that could obscure Earth-like planets. In 2023-2024, the final warm optics have been procured and assembled in a new laboratory at KU Leuven. First fringes and null measurements were obtained using a Gallium Lanthanum Sulfide (GLS) photonic chip that was also tested at cryogenic temperatures. In this paper, we present an overall update of the NOTT project with a particular focus on the cold mechanical design, the first results in the laboratory with the final NOTT warm optics, and the ongoing Asgard integration activities. We also report on other ongoing activities such as the characterization of the photonic chip (GLS, LiNbO3, SiO), the development of the exoplanet science case, the design of the dispersion control module, and the progress with the self-calibration data reduction software.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
The BlackGEM telescope array I: Overview
Authors:
Paul J. Groot,
S. Bloemen,
P. Vreeswijk,
J. van Roestel,
P. G. Jonker,
G. Nelemans,
M. Klein-Wolt,
R. Le Poole,
D. Pieterse,
M. Rodenhuis,
W. Boland,
M. Haverkorn,
C. Aerts,
R. Bakker,
H. Balster,
M. Bekema,
E. Dijkstra,
P. Dolron,
E. Elswijk,
A. van Elteren,
A. Engels,
M. Fokker,
M. de Haan,
F. Hahn,
R. ter Horst
, et al. (49 additional authors not shown)
Abstract:
The main science aim of the BlackGEM array is to detect optical counterparts to gravitational wave mergers. Additionally, the array will perform a set of synoptic surveys to detect Local Universe transients and short time-scale variability in stars and binaries, as well as a six-filter all-sky survey down to ~22nd mag. The BlackGEM Phase-I array consists of three optical wide-field unit telescopes…
▽ More
The main science aim of the BlackGEM array is to detect optical counterparts to gravitational wave mergers. Additionally, the array will perform a set of synoptic surveys to detect Local Universe transients and short time-scale variability in stars and binaries, as well as a six-filter all-sky survey down to ~22nd mag. The BlackGEM Phase-I array consists of three optical wide-field unit telescopes. Each unit uses an f/5.5 modified Dall-Kirkham (Harmer-Wynne) design with a triplet corrector lens, and a 65cm primary mirror, coupled with a 110Mpix CCD detector, that provides an instantaneous field-of-view of 2.7~square degrees, sampled at 0.564\arcsec/pixel. The total field-of-view for the array is 8.2 square degrees. Each telescope is equipped with a six-slot filter wheel containing an optimised Sloan set (BG-u, BG-g, BG-r, BG-i, BG-z) and a wider-band 440-720 nm (BG-q) filter. Each unit telescope is independent from the others. Cloud-based data processing is done in real time, and includes a transient-detection routine as well as a full-source optimal-photometry module. BlackGEM has been installed at the ESO La Silla observatory as of October 2019. After a prolonged COVID-19 hiatus, science operations started on April 1, 2023 and will run for five years. Aside from its core scientific program, BlackGEM will give rise to a multitude of additional science cases in multi-colour time-domain astronomy, to the benefit of a variety of topics in astrophysics, such as infant supernovae, luminous red novae, asteroseismology of post-main-sequence objects, (ultracompact) binary stars, and the relation between gravitational wave counterparts and other classes of transients
△ Less
Submitted 30 May, 2024; v1 submitted 29 May, 2024;
originally announced May 2024.
-
VELOcities of CEpheids (VELOCE) I. High-precision radial velocities of Cepheids
Authors:
Richard I. Anderson,
Giordano Viviani,
Shreeya S. Shetye,
Nami Mowlavi,
Laurent Eyer,
Lovro Palaversa,
Berry Holl,
Sergi Blanco-Cuaresma,
Kateryna Kravchenko,
Michał Pawlak,
Mauricio Cruz Reyes,
Saniya Khan,
Henryka E. Netzel,
Lisa Löbling,
Péter I. Pápics,
Andreas Postel,
Maroussia Roelens,
Zoi T. Spetsieri,
Anne Thoul,
Jiří Zák,
Vivien Bonvin,
David V. Martin,
Martin Millon,
Sophie Saesen,
Aurélien Wyttenbach
, et al. (5 additional authors not shown)
Abstract:
This first VELOCE data release comprises 18,225 high-precision RV measurements of 258 bona fide classical Cepheids on both hemispheres collected mainly between 2010 and 2022, alongside 1161 additional observations of 164 other stars. The median per-observation RV uncertainty is 0.037 km/s, and some reach 0.002 km/s. Non-variable standard stars characterize RV zero-point stability and provide a bas…
▽ More
This first VELOCE data release comprises 18,225 high-precision RV measurements of 258 bona fide classical Cepheids on both hemispheres collected mainly between 2010 and 2022, alongside 1161 additional observations of 164 other stars. The median per-observation RV uncertainty is 0.037 km/s, and some reach 0.002 km/s. Non-variable standard stars characterize RV zero-point stability and provide a base for future cross-calibrations. We determined zero-point differences between VELOCE and 31 literature data sets using template fitting and measured linear period changes of 146 Cepheids. Seventy six spectroscopic binary Cepheids and 14 candidates are identified using VELOCE data alone and are investigated in detail in a companion paper (VELOCE II). Several new insights into Cepheid pulsations were obtained, including: a) the most detailed description of the Hertzsprung progression by RVs; b) the identification of double-peaked bumps in the RV curve; c) clear evidence that virtually all Cepheids feature spectroscopic variability signals that lead to modulated RV variability. We identified 36 such stars, of which 4 also exhibit orbital motion. Linear radius variations depend strongly on pulsation period and a steep increase in slope of the $Δ$R/p versus logP-relation is found near 10d, challenging the existence of a tight relation between Baade-Wesselink projection factors and pulsation periods. We investigated the accuracy of RV time series measurements, v$_γ$, and RV amplitudes published in Gaia's DR3 and determined an average offset of 0.65 \pm 0.11 km/s relative to VELOCE. We recommend adopting a single set of template correlation parameters for distinct classes of large-amplitude variable stars to avoid systematic offsets in v$_γ$ among stars belonging to the same class. Peak-to-peak amplitudes of Gaia RVs exhibit significant (16%) dispersion compared to VELOCE. [abridged]
△ Less
Submitted 25 April, 2024; v1 submitted 18 April, 2024;
originally announced April 2024.
-
Asgard/NOTT: L-band nulling interferometry at the VLTI. II. Warm optical design and injection system
Authors:
Germain Garreau,
Azzurra Bigioli,
Romain Laugier,
Gert Raskin,
Johan Morren,
Jean-Philippe Berger,
Colin Dandumont,
Harry-Dean Kenchington Goldsmith,
Simon Gross,
Michael Ireland,
Lucas Labadie,
Jérôme Loicq,
Stephen Madden,
Guillermo Martin,
Marc-Antoine Martinod,
Alexandra Mazzoli,
Ahmed Sanny,
Hancheng Shao,
Kunlun Yan,
Denis Defrère
Abstract:
Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$μ$m, where the contrast between exoplanets and their host stars is advantageous. The breakth…
▽ More
Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$μ$m, where the contrast between exoplanets and their host stars is advantageous. The breakthrough is the use of a photonic beam combiner, which only recently allowed the required theoretical raw contrast of $10^{-3}$ in this spectral range. Nulling interferometry observations of exoplanets also require a high degree of balancing between the four pupils of the VLTI in terms of intensity, phase, and polarization. The injection into the beam combiner and the requirements of nulling interferometry are driving the design of the warm optics and the injection system. The optical design up to the beam combiner is presented. It offers a technical solution to efficiently couple the light from the VLTI into the beam combiner. During the coupling, the objective is to limit throughput losses to 5% of the best expected efficiency for the injection. To achieve this, a list of different loss sources is considered with their respective impact on the injection efficiency. Solutions are also proposed to meet the requirements on beam balancing for intensity, phase, and polarization. The different properties of the design are listed, including the optics used, their alignment and tolerances, and their impact on the instrumental performances in terms of throughput and null depth. The performance evaluation gives an expected throughput loss of less than <6.4% of the best efficiency for the injection and a null depth of $\sim2.10^{-3}$, mainly from optical path delay errors outside the scope of this work.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
MELCHIORS: The Mercator Library of High Resolution Stellar Spectroscopy
Authors:
P. Royer,
T. Merle,
K. Dsilva,
S. Sekaran,
H. Van Winckel,
Y. Frémat,
M. Van der Swaelmen,
S. Gebruers,
A. Tkachenko,
M. Laverick,
M. Dirickx,
G. Raskin,
H. Hensberge,
M. Abdul-Masih,
B. Acke,
M. L. Alonso,
S. Bandhu Mahato,
P. G. Beck,
N. Behara,
S. Bloemen,
B. Buysschaert,
N. Cox,
J. Debosscher,
P. De Cat,
P. Degroote
, et al. (49 additional authors not shown)
Abstract:
Over the past decades, libraries of stellar spectra have been used in a large variety of science cases, including as sources of reference spectra for a given object or a given spectral type. Despite the existence of large libraries and the increasing number of projects of large-scale spectral surveys, there is to date only one very high-resolution spectral library offering spectra from a few hundr…
▽ More
Over the past decades, libraries of stellar spectra have been used in a large variety of science cases, including as sources of reference spectra for a given object or a given spectral type. Despite the existence of large libraries and the increasing number of projects of large-scale spectral surveys, there is to date only one very high-resolution spectral library offering spectra from a few hundred objects from the southern hemisphere (UVES-POP) . We aim to extend the sample, offering a finer coverage of effective temperatures and surface gravity with a uniform collection of spectra obtained in the northern hemisphere.
Between 2010 and 2020, we acquired several thousand echelle spectra of bright stars with the Mercator-HERMES spectrograph located in the Roque de Los Muchachos Observatory in La Palma, whose pipeline offers high-quality data reduction products. We have also developed methods to correct for the instrumental response in order to approach the true shape of the spectral continuum. Additionally, we have devised a normalisation process to provide a homogeneous normalisation of the full spectral range for most of the objects.
We present a new spectral library consisting of 3256 spectra covering 2043 stars. It combines high signal-to-noise and high spectral resolution over the entire range of effective temperatures and luminosity classes. The spectra are presented in four versions: raw, corrected from the instrumental response, with and without correction from the atmospheric molecular absorption, and normalised (including the telluric correction).
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
Asgard/NOTT: L-band nulling interferometry at the VLTI I. Simulating the expected high-contrast performance
Authors:
Romain Laugier,
Denis Defrère,
Benjamin Courtney-Barrer,
Felix A. Dannert,
Alexis Matter,
Colin Dandumont,
Simon Gross,
Olivier Absil,
Azzurra Bigioli,
Germain Garreau,
Lucas Labadie,
Jérôme Loicq,
Marc-Antoine Martinod,
Alexandra Mazzoli,
Gert Raskin,
Ahmed Sanny
Abstract:
Context: NOTT (formerly Hi-5) is a new high-contrast L' band (3.5-4.0 \textmu m) beam combiner for the VLTI with the ambitious goal to be sensitive to young giant exoplanets down to 5 mas separation around nearby stars. The performance of nulling interferometers in these wavelengths is affected both by fundamental noise from the background and by the contributions of instrumental noises. This moti…
▽ More
Context: NOTT (formerly Hi-5) is a new high-contrast L' band (3.5-4.0 \textmu m) beam combiner for the VLTI with the ambitious goal to be sensitive to young giant exoplanets down to 5 mas separation around nearby stars. The performance of nulling interferometers in these wavelengths is affected both by fundamental noise from the background and by the contributions of instrumental noises. This motivates the development of end-to-end simulations to optimize these instruments. Aims: To enable the performance evaluation and inform the design of such instruments on the current and future infrastructures, taking into account the different sources of noise, and their correlation. Methods: SCIFYsim is an end-to-end simulator for single mode filtered beam combiners, with an emphasis on nulling interferometers. It is used to compute a covariance matrix of the errors. Statistical detection tests based on likelihood ratios are then used to compute compound detection limits for the instrument. Results: With the current assumptions on the performance of the wavefront correction systems, the errors are dominated by correlated instrumental errors down to stars of magnitude 6-7 in the L band, beyond which thermal background from the telescopes and relay system becomes dominant. Conclusions: SCIFYsim is suited to anticipate some of the challenges of design, tuning, operation and signal processing for integrated optics beam combiners. The detection limits found for this early version of NOTT simulation with the unit telescopes are compatible with detections at contrasts up to $10^5$ in the L band at separations of 5 to 80 mas around bright stars.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
L-band nulling interferometry at the VLTI with Asgard/Hi-5: status and plans
Authors:
Denis Defrère,
Azzurra Bigioli,
Colin Dandumont,
Germain Garreau,
Romain Laugier,
Marc-Antoine Martinod,
Olivier Absil,
Jean-Philippe Berger,
Emilie Bouzerand,
Benjamin Courtney-Barrer,
Alexandre Emsenhuber,
Steve Ertel,
Jonathan Gagne,
Adrian M. Glauser,
Simon Gross,
Michael J. Ireland,
Harry-Dean Kenchington,
Jacques Kluska,
Stefan Kraus,
Lucas Labadie,
Viktor Laborde,
Alain Leger,
Jarron Leisenring,
Jérôme Loicq,
Guillermo Martin
, et al. (12 additional authors not shown)
Abstract:
Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outp…
▽ More
Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.
△ Less
Submitted 18 August, 2022;
originally announced August 2022.
-
The CubeSpec space mission: Asteroseismology of massive stars from time-series optical spectroscopy
Authors:
D. M. Bowman,
B. Vandenbussche,
H. Sana,
A. Tkachenko,
G. Raskin,
T. Delabie,
B. Vandoren,
P. Royer,
S. Garcia,
T. Van Reeth,
the CubeSpec Collaboration
Abstract:
The ESA/KU Leuven CubeSpec mission is specifically designed to provide low-cost space-based high-resolution optical spectroscopy. Here we highlight the science requirements and capabilities of CubeSpec. The primary science goal is to perform pulsation mode identification from spectroscopic line profile variability and empower asteroseismology of massive stars.
The ESA/KU Leuven CubeSpec mission is specifically designed to provide low-cost space-based high-resolution optical spectroscopy. Here we highlight the science requirements and capabilities of CubeSpec. The primary science goal is to perform pulsation mode identification from spectroscopic line profile variability and empower asteroseismology of massive stars.
△ Less
Submitted 18 July, 2022;
originally announced August 2022.
-
ETpathfinder: a cryogenic testbed for interferometric gravitational-wave detectors
Authors:
A. Utina,
A. Amato,
J. Arends,
C. Arina,
M. de Baar,
M. Baars,
P. Baer,
N. van Bakel,
W. Beaumont,
A. Bertolini,
M. van Beuzekom,
S. Biersteker,
A. Binetti,
H. J. M. ter Brake,
G. Bruno,
J. Bryant,
H. J. Bulten,
L. Busch,
P. Cebeci,
C. Collette,
S. Cooper,
R. Cornelissen,
P. Cuijpers,
M. van Dael,
S. Danilishin
, et al. (90 additional authors not shown)
Abstract:
The third-generation of gravitational wave observatories, such as the Einstein Telescope (ET) and Cosmic Explorer (CE), aim for an improvement in sensitivity of at least a factor of ten over a wide frequency range compared to the current advanced detectors. In order to inform the design of the third-generation detectors and to develop and qualify their subsystems, dedicated test facilities are req…
▽ More
The third-generation of gravitational wave observatories, such as the Einstein Telescope (ET) and Cosmic Explorer (CE), aim for an improvement in sensitivity of at least a factor of ten over a wide frequency range compared to the current advanced detectors. In order to inform the design of the third-generation detectors and to develop and qualify their subsystems, dedicated test facilities are required. ETpathfinder prototype uses full interferometer configurations and aims to provide a high sensitivity facility in a similar environment as ET. Along with the interferometry at 1550 nm and silicon test masses, ETpathfinder will focus on cryogenic technologies, lasers and optics at 2090 nm and advanced quantum-noise reduction schemes. This paper analyses the underpinning noise contributions and combines them into full noise budgets of the two initially targeted configurations: 1) operating with 1550 nm laser light and at a temperature of 18 K and 2) operating at 2090 nm wavelength and a temperature of 123 K.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
The CubeSpec space mission. I. Asteroseismology of massive stars from time series optical spectroscopy: science requirements and target list prioritisation
Authors:
D. M. Bowman,
B. Vandenbussche,
H. Sana,
A. Tkachenko,
G. Raskin,
T. Delabie,
B. Vandoren,
P. Royer,
S. Garcia,
T. Van Reeth
Abstract:
Context. There is currently a niche for providing high-cadence, high resolution, time-series optical spectroscopy from space, which can be filled by using a low-cost cubesat mission. The Belgian-led ESA CubeSpec mission is specifically designed to provide space-based, low-cost spectroscopy with specific capabilities that can be optimised for a particular science need. Approved as an ESA in-orbit d…
▽ More
Context. There is currently a niche for providing high-cadence, high resolution, time-series optical spectroscopy from space, which can be filled by using a low-cost cubesat mission. The Belgian-led ESA CubeSpec mission is specifically designed to provide space-based, low-cost spectroscopy with specific capabilities that can be optimised for a particular science need. Approved as an ESA in-orbit demonstrator, the CubeSpec satellite's primary science objective will focus on obtaining high-cadence, high resolution optical spectroscopic data to facilitate asteroseismology of pulsating massive stars. Aims. In this first paper, we aim to search for pulsating massive stars suitable for the CubeSpec mission, specifically $β$ Cep stars, which typically require time series spectroscopy to identify the geometry of their pulsation modes. Methods. Based on the science requirements needed to enable asteroseismology of massive stars with the capabilities of CubeSpec's spectrograph, we combine a literature study for pulsation with the analysis of recent high-cadence time series TESS photometry to classify the variability for stars brighter than V < 4 mag and between O9 and B3 in spectral type. Results. Among the 90 stars that meet our magnitude and spectral type requirements, we identify 23 promising $β$ Cep stars with high-amplitude (non-)radial pulsation modes with frequencies below 7 d$^{-1}$. Using further constraints on projected rotational velocities, pulsation amplitudes and number of pulsation modes, we devise a prioritised target list for the CubeSpec mission according to its science requirements and the potential of the targets for asteroseismology. The full target catalogue further provide a modern TESS-based review of line profile and photometric variability properties among bright O9-B3 stars.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
-
MARVEL, a four-telescope array for high-precision radial-velocity monitoring
Authors:
Gert Raskin,
Christian Schwab,
Bart Vandenbussche,
Joris De Ridder,
Cyprien Lanthermann,
Jesus Pérez Padilla,
Andrew Tkachenko,
Hugues Sana,
Pierre Royer,
Saskia Prins,
Leen Decin,
Denis Defrère,
Jacob Pember,
David Atkinson,
Alistair Glasse,
Don Pollacco,
Giovanna Tinetti,
Manuel Güdel,
Julian Stürmer,
Ignasi Ribas,
Alexis Brandeker,
Lars Buchhave,
Samuel Halverson,
Gerardo Avila,
Johan Morren
, et al. (1 additional authors not shown)
Abstract:
Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the…
▽ More
Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the orbit and mass, and complete the picture of densities and composition of the exoplanet systems found. The Ariel mission (ESA, planned launch 2028) will characterize exoplanet atmospheres with infrared spectroscopy. Characterization of stellar activity using optical spectroscopy from the ground is key to retrieve the spectral footprint of the planetary atmosphere in Ariel's spectra. To enable the scientific harvest of the TESS, PLATO and Ariel space missions, we plan to install MARVEL as an extension of the existing Mercator Telescope at the Roque De Los Muchachos Observatory on La Palma (SPAIN). MARVEL consists of an array of four 80 cm telescopes linked through optical fibers to a single high-resolution echelle spectrograph, optimized for extreme-precision radial velocity measurements. It can observe the radial velocities of four different stars simultaneously or, alternatively, combine the flux from four telescopes pointing to a single faint target in one spectrum. MARVEL is constructed by a KU Leuven (Belgium) led collaboration, with contributions from the UK, Austria, Australia, Sweden, Denmark and Spain. In this paper, we present the MARVEL instrument with special focus on the optical design and expected performance of the spectrograph, and report on the status of the project.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Fiber modal noise mitigation by a rotating double scrambler
Authors:
Gert Raskin,
Jacob Pember,
Dmytro Rogozin,
Christian Schwab,
David Coutts
Abstract:
Fiber modal noise is a performance limiting factor in high-resolution spectroscopy, both with respect to achieving high signal-to-noise ratios or when targeting high-precision radial velocity measurements, with multi-mode fiber-fed high-resolution spectrographs. Traditionally, modal noise is reduced by agitating or "shaking" the fiber. This way, the light propagating in the fiber is redistributed…
▽ More
Fiber modal noise is a performance limiting factor in high-resolution spectroscopy, both with respect to achieving high signal-to-noise ratios or when targeting high-precision radial velocity measurements, with multi-mode fiber-fed high-resolution spectrographs. Traditionally, modal noise is reduced by agitating or "shaking" the fiber. This way, the light propagating in the fiber is redistributed over many different modes. However, in case of fibers with only a limited number of modes, e.g. at near-infrared wavelengths or in adaptive-optics assisted systems, this method becomes very inefficient. The strong agitation that would be needed stresses the fiber and could lead to focal ratio degradation, or worse, to damaging the fiber. As an alternative approach, we propose to make use of a classic optical double scrambler, a device that is already implemented in many high-precision radial-velocity spectrographs, to mitigate the effect of modal noise by rotating the scrambler's first fiber end during each exposure. Because of the rotating illumination pattern of the scrambler's second fiber, the modes that are excited vary continuously. This leads to very efficient averaging of the modal pattern at the fiber exit and to a strong reduction of modal noise. In this contribution, we present a prototype design and preliminary laboratory results of the rotating double scrambler.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Optimizing MARVEL for the radial velocity follow-up of TESS and PLATO transiting exoplanets
Authors:
Cyprien Lanthermann,
Joris De Ridder,
Hugues Sana,
Pierre Royer,
Denis Defrère,
Gert Raskin,
Bart Vandenbussche,
Andrew Tkachenko,
Hans Van Winckel
Abstract:
The space missions TESS and PLATO plan to double the number of 4000 exoplanets already discovered and will measure the size of thousands of exoplanets around the brightest stars in the sky, allowing ground-based radial velocity spectroscopy follow-up to determine the orbit and mass of the detected planets. The new facility we are develo**, MARVEL (Raskin et al. this conference), will enable the…
▽ More
The space missions TESS and PLATO plan to double the number of 4000 exoplanets already discovered and will measure the size of thousands of exoplanets around the brightest stars in the sky, allowing ground-based radial velocity spectroscopy follow-up to determine the orbit and mass of the detected planets. The new facility we are develo**, MARVEL (Raskin et al. this conference), will enable the ground-based follow-up of large numbers of exoplanet detections, expected from TESS and PLATO, which cannot be carried out only by the current facilities that achieve the necessary radial velocity accuracy of 1 m/s or less. This paper presents the MARVEL observation strategy and performance analysis based on predicted PLATO transit detection yield simulations. The resulting observation scenario baseline will help in the instrument design choices and demonstrate the effectiveness of MARVEL as a TESS and PLATO science enabling facility.
△ Less
Submitted 13 December, 2020;
originally announced December 2020.
-
Rubidium transitions as wavelength reference for astronomical Doppler spectrographs
Authors:
Dmytro Rogozin,
Tobias Feger,
Christian Schwab,
Yulia V. Gurevich,
Gert Raskin,
David W. Coutts,
Julian Stuermer,
Andreas Seifahrt,
Thorsten Fuehrer,
Thomas Legero,
Hans van Winckel,
Sam Halverson,
Andreas Quirrenbach
Abstract:
Precise wavelength calibration is a critical issue for high-resolution spectroscopic observations. The ideal calibration source should be able to provide a very stable and dense grid of evenly distributed spectral lines of constant intensity. A new method which satisfies all mentioned conditions has been developed by our group. The approach is to actively measure the exact position of a single spe…
▽ More
Precise wavelength calibration is a critical issue for high-resolution spectroscopic observations. The ideal calibration source should be able to provide a very stable and dense grid of evenly distributed spectral lines of constant intensity. A new method which satisfies all mentioned conditions has been developed by our group. The approach is to actively measure the exact position of a single spectral line of a Fabry-Perot etalon with very high precision with a wavelength-tuneable laser and compare it to an extremely stable wavelength standard. The ideal choice of standard is the D2 absorption line of Rubidium, which has been used as an optical frequency standard for decades. With this technique, the problem of stable wavelength calibration of spectrographs becomes a problem of how reliably we can measure and anchor one etalon line to the Rb transition. In this work we present our self-built module for Rb saturated absorption spectroscopy and discuss its stability.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
No signature of the orbital motion of a putative 70 solar mass black hole in LB-1
Authors:
Michael Abdul-Masih,
Gareth Banyard,
Julia Bodensteiner,
Dominic M. Bowman,
Karan Dsilva,
Matthias Fabry,
Calum Hawcroft,
Laurent Mahy,
Pablo Marchant,
Gert Raskin,
Maddalena Reggiani,
Hugues Sana,
Tomer Shenar,
Andrew Tkachenko,
Hans Van Winckel,
Lore Vermeylen
Abstract:
Liu et al. (2019) recently reported the detection of a 68 [+11/-13] solar mass (Msun) black hole (BH) paired with an 8.2 [+0.9/-1.2] Msun B-type sub-giant star in the 78.9-day spectroscopic binary system LB-1. Such a black hole is over twice as massive as any other known stellar-mass black hole with non-compact companions2 and its mass approaches those that result from BH-BH coalescences that are…
▽ More
Liu et al. (2019) recently reported the detection of a 68 [+11/-13] solar mass (Msun) black hole (BH) paired with an 8.2 [+0.9/-1.2] Msun B-type sub-giant star in the 78.9-day spectroscopic binary system LB-1. Such a black hole is over twice as massive as any other known stellar-mass black hole with non-compact companions2 and its mass approaches those that result from BH-BH coalescences that are detected by gravitational wave interferometers. Its presence in a solar-like metallicity environment challenges conventional theories of massive binary evolution, stellar winds and core-collapse supernovae, so that more exotic scenarios seem to be needed to explain the existence and properties of LB-1. Here, we show that the observational diagnostics used to derive the BH mass results from the orbital motion of the B-type star, not that of the BH. As a consequence, no evidence for a massive BH remains in the data, therefore solving the existing tension with formation models of such a massive BH at solar metallicity and with theories of massive star evolution in general.
△ Less
Submitted 9 December, 2019;
originally announced December 2019.
-
Fiber modal noise mitigation by a rotating double scrambler
Authors:
Gert Raskin,
Dmytro Rogozin,
Tom Mladenov,
Christian Schwab,
David Coutts
Abstract:
Fiber modal noise is a performance limiting factor in high-precision radial velocity measurements with multi-mode fiber-fed high-resolution spectrographs. Traditionally, modal noise is mitigated by agitating the fiber, this way redistributing the light that propagates in the fiber over many different modes. However, in case of fibers with only a limited number of modes, e.g. at near-infrared wavel…
▽ More
Fiber modal noise is a performance limiting factor in high-precision radial velocity measurements with multi-mode fiber-fed high-resolution spectrographs. Traditionally, modal noise is mitigated by agitating the fiber, this way redistributing the light that propagates in the fiber over many different modes. However, in case of fibers with only a limited number of modes, e.g. at near-infrared wavelengths or in adaptive-optics assisted systems, this method becomes very inefficient. The strong agitation that would be needed stresses the fiber and can lead to focal ratio degradation. As an alternative approach, we propose to use a classic optical double scrambler and to rotate the scrambler's first fiber end during each exposure. Because of the rotating illumination pattern of the scrambler's second fiber, the modes that are excited vary continuously. This leads to very efficient averaging of the modal pattern at the fiber exit and to a strong reduction of modal noise. In this contribution, we present a prototype design and first laboratory results of the rotating double scrambler.
△ Less
Submitted 16 November, 2019;
originally announced November 2019.
-
CUBESPEC: Low-cost space-based astronomical spectroscopy
Authors:
Gert Raskin,
Tjorven Delabie,
Wim De Munter,
Hugues Sana,
Bart Vandenbussche,
Bram Vandoren,
Victoria Antoci,
Hans Kjeldsen,
Christoffer Karoff,
Alex de Koter,
Jean-Michel Désert,
Tom Mladenov,
Dirk Vandepitte
Abstract:
CubeSats are routinely used for low-cost photometry from space. Space-borne spectroscopy, however, is still the exclusive domain of much larger platforms. Key astrophysical questions in e.g. stellar physics and exoplanet research require uninterrupted spectral monitoring from space over weeks or months. Such monitoring of individual sources is unfortunately not affordable with these large platform…
▽ More
CubeSats are routinely used for low-cost photometry from space. Space-borne spectroscopy, however, is still the exclusive domain of much larger platforms. Key astrophysical questions in e.g. stellar physics and exoplanet research require uninterrupted spectral monitoring from space over weeks or months. Such monitoring of individual sources is unfortunately not affordable with these large platforms. With CUBESPEC we plan to offer the astronomical community a low-cost CubeSat solution for near-UV/optical/near-IR spectroscopy that enables this type of observations. CUBESPEC is a generic spectrograph that can be configured with minimal hardware changes to deliver both low resolution (R=100) with very large spectral coverage (200-1000nm), as well as high resolution (R=30,000) over a selected wavelength range. It is built around an off-axis Cassegrain telescope and a slit spectrograph with configurable dispersion elements. CUBESPEC will use a compact attitude determination and control system for coarse pointing of the entire spacecraft, supplemented with a fine-guidance system using a fast steering mirror to center the source on the spectrograph slit and to cancel out satellite jitter. An extremely compact optical design allows us to house this instrument in a 6U CubeSat with a volume of only 10x20x30cm$^{3}$, while preserving a maximized entrance pupil of ca. 9x19cm$^{2}$. In this contribution, we give an overview of the CUBESPEC project, discuss its most relevant science cases, and present the design of the instrument.
△ Less
Submitted 28 June, 2018; v1 submitted 30 May, 2018;
originally announced May 2018.
-
Measuring Intra-pixel Sensitivity Variations of a CMOS Image Sensor
Authors:
Swaraj Bandhu Mahato,
Joris De Ridder,
Guy Meynants,
Gert Raskin,
Hans Van Winckel
Abstract:
Some applications in scientific imaging, like space-based high-precision photometry, benefit from a detailed characterization of the sensitivity variation within a pixel. A detailed map of the intra-pixel sensitivity (IPS) allows to increase the photometric accuracy by correcting for the impact of the tiny sub-pixel movements of the image sensor during integration. This paper reports the measureme…
▽ More
Some applications in scientific imaging, like space-based high-precision photometry, benefit from a detailed characterization of the sensitivity variation within a pixel. A detailed map of the intra-pixel sensitivity (IPS) allows to increase the photometric accuracy by correcting for the impact of the tiny sub-pixel movements of the image sensor during integration. This paper reports the measurement of the sub-pixel sensitivity variation and the extraction of the IPS map of a front-side illuminated CMOS image sensor with a pixel pitch of 6 \boldmath$μm$. Our optical measurement setup focuses a collimated beam onto the imaging surface with a microscope objective. The spot was scanned in a raster over a single pixel to probe the pixel response at each (sub-pixel) scan position. We model the optical setup in ZEMAX to cross-validate the optical spot profile described by an Airy diffraction pattern. In this work we introduce a forward modeling technique to derive the variation of the IPS. We model the optical spot scanning system and discretize the CMOS pixel response. Fitting this model to the measured data allows us to quantify the spatial sensitivity variation within a single pixel. Finally, we compare our results to those obtained from the more commonly used Wiener deconvolution.
△ Less
Submitted 4 May, 2018;
originally announced May 2018.
-
A novel technique to characterize the spatial intra-pixel sensitivity variations in a CMOS image sensor
Authors:
Swaraj Mahato,
J. De Ridder,
Guy Meynants,
Gert Raskin,
H. Van Winckel
Abstract:
To understand the scientific imaging capability, one must characterize the intra-pixel sensitivity variation (IPSV) of the CMOS image sensor. Extracting an IPSV map contributes to an improved detector calibration that allows to eliminate some of the uncertainty in the spatial response of the system. This paper reports the measurement of the sub-pixel sensitivity variation and the extraction of the…
▽ More
To understand the scientific imaging capability, one must characterize the intra-pixel sensitivity variation (IPSV) of the CMOS image sensor. Extracting an IPSV map contributes to an improved detector calibration that allows to eliminate some of the uncertainty in the spatial response of the system. This paper reports the measurement of the sub-pixel sensitivity variation and the extraction of the 2D IPSV map of a front-side illuminated CMOS image sensor with a pixel pitch of 6 μm. Our optical measurement setup focuses a collimated beam onto the imaging surface with a microscope objective. The spot was scanned in a raster over a single pixel and its immediate neighbors in order to probe its response at selected (sub-pixel) positions. In this work we introduced a novel technique to extract the IPSV map by fitting (forward modeling) the measured data to a mathematical model of the image, generated in a single pixel that allows for a spatially varying sensitivity.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
Seismic probing of the first dredge-up event through the eccentric red-giant & red-giant spectroscopic binary KIC9163796
Authors:
P. G. Beck,
T. Kallinger,
K. Pavlovski,
A. Palacios,
A. Tkachenko,
S. Mathis,
R. A. Garcia,
E. Corsaro,
C. Johnston,
B. Mosser,
T. Ceillier,
J. -D. do Nascimento Jr.,
G. Raskin
Abstract:
Binaries in double-lined spectroscopic systems provide a homogeneous set of stars. Differences of parameters, such as age or initial conditions, which otherwise would have strong impact on the stellar evolution, can be neglected. The observed differences are determined by the difference in stellar mass between the two components. The mass ratio can be determined with much higher accuracy than the…
▽ More
Binaries in double-lined spectroscopic systems provide a homogeneous set of stars. Differences of parameters, such as age or initial conditions, which otherwise would have strong impact on the stellar evolution, can be neglected. The observed differences are determined by the difference in stellar mass between the two components. The mass ratio can be determined with much higher accuracy than the actual stellar mass. In this work, we aim to study the eccentric binary system KIC9163796, whose two components are very close in mass and both are low-luminosity red-giant stars from four years of Kepler space photometry and high-resolution spectroscopy with Hermes. Mass and radius of the primary were determined through asteroseismology to be 1.39+/-0.06 Mo and 5.35+/-0.09 Ro, resp. From spectral disentangling the mass ratio was found to be 1.015+/-0.005 and that the secondary is ~600K hotter than the primary. Evolutionary models place both components, in the early and advanced stage of the first dredge-up event on the red-giant branch. From theoretical models of the primary, we derived the internal rotational gradient. From a grid of models, the measured difference in lithium abundance is compared with theoretical predictions. The surface rotation of the primary is determined from the Kepler light curve and resembles the orbital period within 10 days. The radial rotational gradient between the surface and core is found to be 6.9+2.0/-1.0. The agreement between the surface rotation with the seismic result indicates that the full convective envelope is rotating quasi-rigidly. The models of the lithium abundance are compatible with a rigid rotation in the radiative zone during the main sequence. Because of the many constraints offered by oscillating stars in binary systems, such objects are important test beds of stellar evolution.
△ Less
Submitted 13 January, 2018; v1 submitted 14 December, 2017;
originally announced December 2017.
-
Constraining stellar physics from red-giant stars in binaries - stellar rotation, mixing processes and stellar activity
Authors:
P. G. Beck,
T. Kallinger,
K. Pavlovski,
A. Palacios,
A. Tkachenko,
R. A. García,
S. Mathis,
E. Corsaro,
C. Johnston,
B. Mosser,
T. Ceillier,
J. -D. do Nascimento Jr.,
G. Raskin
Abstract:
The unparalleled photometric data obtained by NASA's Kepler Space Telescope has led to an improved understanding of stellar structure and evolution - in particular for solar-like oscillators in this context. Binary stars are fascinating objects. Because they were formed together, binary systems provide a set of two stars with very well constrained parameters. Those can be used to study properties…
▽ More
The unparalleled photometric data obtained by NASA's Kepler Space Telescope has led to an improved understanding of stellar structure and evolution - in particular for solar-like oscillators in this context. Binary stars are fascinating objects. Because they were formed together, binary systems provide a set of two stars with very well constrained parameters. Those can be used to study properties and physical processes, such as the stellar rotation, dynamics and rotational mixing of elements and allows us to learn from the differences we find between the two components. In this work, we discussed a detailed study of the binary system KIC9163796, discovered through Kepler photometry. The ground-based follow-up spectroscopy showed that this system is a double-lined spectroscopic binary, with a mass ratio close to unity. However, the fundamental parameters of the components of this system as well as their lithium abundances differ substantially. Kepler photometry of this system allows to perform a detailed seismic analysis as well as to derive the orbital period and the surface rotation rate of the primary component of the system. Indications of the seismic signature of the secondary are found. The differing parameters are best explained with both components located in the early and the late phase of the first dredge up at the bottom of the red-giant branch. Observed lithium abundances in both components are in good agreement with prediction of stellar models including rotational mixing. By combining observations and theory, a comprehensive picture of the system can be drawn.
△ Less
Submitted 4 November, 2016;
originally announced November 2016.
-
A test field for Gaia. Radial velocity catalogue of stars in the South Ecliptic Pole
Authors:
Y. Frémat,
M. Altmann,
E. Pancino,
C. Soubiran,
P. Jofré,
Y. Damerdji,
U. Heiter,
F. Royer,
G. Seabroke,
R. Sordo,
S. Blanco-Cuaresma,
G. Jasniewicz,
C. Martayan,
F. Thévenin,
A. Vallenari,
R. Blomme,
M. David,
E. Gosset,
D. Katz,
Y. Viala,
S. Boudreault,
T. Cantat-Gaudin,
A. Lobel,
K. Meisenheimer,
T. Nordlander
, et al. (3 additional authors not shown)
Abstract:
Gaia is a space mission currently measuring the five astrometric parameters as well as spectrophotometry of at least 1 billion stars to G = 20.7 mag with unprecedented precision. The sixth parameter in phase space (radial velocity) is also measured thanks to medium-resolution spectroscopy being obtained for the 150 million brightest stars. During the commissioning phase, two fields, one around eac…
▽ More
Gaia is a space mission currently measuring the five astrometric parameters as well as spectrophotometry of at least 1 billion stars to G = 20.7 mag with unprecedented precision. The sixth parameter in phase space (radial velocity) is also measured thanks to medium-resolution spectroscopy being obtained for the 150 million brightest stars. During the commissioning phase, two fields, one around each ecliptic pole, have been repeatedly observed to assess and to improve the overall satellite performances as well as the associated reduction and analysis software. A ground-based photometric and spectroscopic survey was therefore initiated in 2007, and is still running in order to gather as much information as possible about the stars in these fields. This work is of particular interest to the validation of the Radial Velocity Spectrometer (RVS) outputs. The paper presents the radial velocity measurements performed for the Southern targets in the 12 - 17 R magnitude range on high- to mid-resolution spectra obtained with the GIRAFFE and UVES spectrographs.
△ Less
Submitted 26 September, 2016;
originally announced September 2016.
-
The discovery of a planetary candidate around the evolved low-mass Kepler giant star HD 175370
Authors:
M. Hrudková,
A. Hatzes,
R. Karjalainen,
H. Lehmann,
S. Hekker,
M. Hartmann,
A. Tkachenko,
S. Prins,
H. van Winckel,
R. de Nutte,
L. Dumortier,
Y. Frémat,
H. Hensberge,
A. Jorissen,
P. Lampens,
M. Laverick,
R. Lombaert,
P. I. Pápics,
G. Raskin,
Á. Sódor,
A. Thoul,
S. van Eck,
C. Waelkens
Abstract:
We report on the discovery of a planetary companion candidate with a minimum mass Msini = 4.6 M_J orbiting the K2 III giant star HD 175370 (KIC 007940959). This star was a target in our program to search for planets around a sample of 95 giant stars observed with Kepler. This detection was made possible using precise stellar radial velocity measurements of HD 175370 taken over five years and four…
▽ More
We report on the discovery of a planetary companion candidate with a minimum mass Msini = 4.6 M_J orbiting the K2 III giant star HD 175370 (KIC 007940959). This star was a target in our program to search for planets around a sample of 95 giant stars observed with Kepler. This detection was made possible using precise stellar radial velocity measurements of HD 175370 taken over five years and four months using the coude echelle spectrograph of the 2-m Alfred Jensch Telescope and the fibre-fed echelle spectrograph HERMES of the 1.2-m Mercator Telescope. Our radial velocity measurements reveal a periodic (349.5 days) variation with a semi-amplitude K = 133 m/s, superimposed on a long-term trend. A low-mass stellar companion with an orbital period of ~88 years in a highly eccentric orbit and a planet in a Keplerian orbit with an eccentricity e = 0.22 are the most plausible explanation of the radial velocity variations. However, we cannot exclude the existence of stellar envelope pulsations as a cause for the low-amplitude radial velocity variations and only future continued monitoring of this system may answer this uncertainty. From Kepler photometry we find that HD 175370 is most likely a low-mass red-giant branch or asymptotic-giant branch star.
△ Less
Submitted 19 September, 2016;
originally announced September 2016.
-
Noise optimization of the source follower of a CMOS pixel using BSIM3 noise model
Authors:
Swaraj Mahato,
Guy Meynants,
Gert Raskin,
J. De Ridder,
H. Van Winckel
Abstract:
CMOS imagers are becoming increasingly popular in astronomy. A very low noise level is required to observe extremely faint targets and to get high-precision flux measurements. Although CMOS technology offers many advantages over CCDs, a major bottleneck is still the read noise. To move from an industrial CMOS sensor to one suitable for scientific applications, an improved design that optimizes the…
▽ More
CMOS imagers are becoming increasingly popular in astronomy. A very low noise level is required to observe extremely faint targets and to get high-precision flux measurements. Although CMOS technology offers many advantages over CCDs, a major bottleneck is still the read noise. To move from an industrial CMOS sensor to one suitable for scientific applications, an improved design that optimizes the noise level is essential. Here, we study the 1/f and thermal noise performance of the source follower (SF) of a CMOS pixel in detail. We identify the relevant design parameters, and analytically study their impact on the noise level using the BSIM3v3 noise model with an enhanced model of gate capacitance. Our detailed analysis shows that the dependence of the 1/f noise on the geometrical size of the source follower is not limited to minimum channel length, compared to the classical approach to achieve the minimum 1/f noise. We derive the optimal gate dimensions (the width and the length) of the source follower that minimize the 1/f noise, and validate our results using numerical simulations. By considering the thermal noise or white noise along with 1/f noise, the total input noise of the source follower depends on the capacitor ratio CG/CFD and the drain current (Id). Here, CG is the total gate capacitance of the source follower and CFD is the total floating diffusion capacitor at the input of the source follower. We demonstrate that the optimum gate capacitance (CG) depends on the chosen bias current but ranges from CFD/3 to CFD to achieve the minimum total noise of the source follower. Numerical calculation and circuit simulation with 180nm CMOS technology are performed to validate our results.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
PLC-controlled cryostats for the BlackGEM and MeerLICHT detectors
Authors:
Gert Raskin,
Johan Morren,
Wim Pessemier,
Steven Bloemen,
Marc Klein-Wolt,
Ronald Roelfsema,
Paul Groot,
Conny Aerts
Abstract:
BlackGEM (BG) is an array of telescopes, currently under development at the Radboud University Nijmegen and at NOVA. It targets the detection of the optical counterparts of gravitational waves. The first 3 BG telescopes are planned to be installed in 2018 at the La Silla observatory. A single prototype telescope, named MeerLICHT, will already be commissioned early 2017 in Sutherland to provide an…
▽ More
BlackGEM (BG) is an array of telescopes, currently under development at the Radboud University Nijmegen and at NOVA. It targets the detection of the optical counterparts of gravitational waves. The first 3 BG telescopes are planned to be installed in 2018 at the La Silla observatory. A single prototype telescope, named MeerLICHT, will already be commissioned early 2017 in Sutherland to provide an optical complement for the MeerKAT radio array. The BG array consists of, initially, a set of 3 robotic 65-cm wide-field telescopes. Each telescope is equipped with a single STA1600 CCD detector with 10.5k x 10.5k 9-mum pixels that covers a 2.7 square degrees field of view. The cryostats for housing these detectors are developed and built at the KU Leuven University. The operational model of BG requires long periods of reliable ands-off operation. Therefore, we designed the cryostats for long vacuum hold time and we make use of a closed-cycle cooling system, based on Polycold PCC Joule-Thomson coolers. A single programmable logic controller (PLC) controls the cryogenic systems of several BG telescopes simultaneously, resulting in a highly reliable, cost-efficient and maintenance-friendly system. PLC-based cryostat control offers some distinct advantages, especially for a robotic facility. Apart of temperature monitoring and control, the PLC also monitors the vacuum quality, the power supply and the status of the PCC coolers (compressor power consumption and temperature, pressure in the gas lines, etc.). Furthermore, it provides an alarming system and safe and reproducible procedures for automatic cool down and warm up. The communication between PLC and higher-level software takes place via the OPC-UA protocol, offering a simple to implement, yet very powerful interface. Finally, a touch-panel display on the PLC provides the operator with a user-friendly and robust technical interface.
△ Less
Submitted 11 July, 2016;
originally announced July 2016.
-
A test for the theory of colliding winds: the periastron passage of 9 Sagittarii I. X-ray and optical spectroscopy
Authors:
Gregor Rauw,
Ronny Blomme,
Yael Naze,
Maxime Spano,
Laurent Mahy,
Eric Gosset,
Delia Volpi,
Hans van Winckel,
Gert Raskin,
Christoffel Waelkens
Abstract:
The long-period, highly eccentric O-star binary 9 Sgr, known for its non-thermal radio emission and its relatively bright X-ray emission, went through its periastron in 2013. Such an event can be used to observationally test the predictions of the theory of colliding stellar winds over a broad range of wavelengths. We have conducted a multi-wavelength monitoring campaign of 9 Sgr around the 2013 p…
▽ More
The long-period, highly eccentric O-star binary 9 Sgr, known for its non-thermal radio emission and its relatively bright X-ray emission, went through its periastron in 2013. Such an event can be used to observationally test the predictions of the theory of colliding stellar winds over a broad range of wavelengths. We have conducted a multi-wavelength monitoring campaign of 9 Sgr around the 2013 periastron. In this paper, we focus on X-ray observations and optical spectroscopy. The optical spectra allow us to revisit the orbital solution of 9 Sgr and to refine its orbital period to 9.1 years. The X-ray flux is maximum at periastron over all energy bands, but with clear differences as a function of energy. The largest variations are observed at energies above 2 keV, whilst the spectrum in the soft band (0.5 - 1.0 keV) remains mostly unchanged indicating that it arises far from the collision region, in the inner winds of the individual components. The level of the hard emission at periastron clearly deviates from the 1/r relation expected for an adiabatic wind interaction zone, whilst this relation seems to hold at the other phases covered by our observations. The spectra taken at phase 0.946 reveal a clear Fe xxv line at 6.7 keV, but no such line is detected at periastron (phi = 0.000) although a simple model predicts a strong line that should be easily visible in the data. The peculiarities of the X-ray spectrum of 9 Sgr could reflect the impact of radiative inhibition as well as a phase-dependent efficiency of particle acceleration on the shock properties.
△ Less
Submitted 22 March, 2016;
originally announced March 2016.
-
The HERMES Solar Atlas and the spectroscopic analysis of the seismic solar analogue KIC3241581
Authors:
P. G. Beck,
C. Allende Prieto,
T. Van Reeth,
A. Tkachenko,
G. Raskin,
H. van Winckel,
J. -D. do Nascimento Jr.,
D. Salabert,
E. Corsaro,
R. A. Garcia
Abstract:
Solar-analog stars provide an excellent opportunity to study the Sun's evolution, i.e. the changes with time in stellar structure, activity, or rotation for solar-like stars. The unparalleled photometric data from the NASA space telescope Kepler allows us to study and characterise solar-like stars through asteroseismology. We aim to spectroscopically investigate the fundamental parameter and chrom…
▽ More
Solar-analog stars provide an excellent opportunity to study the Sun's evolution, i.e. the changes with time in stellar structure, activity, or rotation for solar-like stars. The unparalleled photometric data from the NASA space telescope Kepler allows us to study and characterise solar-like stars through asteroseismology. We aim to spectroscopically investigate the fundamental parameter and chromospheric activity of solar analogues and twins, based on observations obtained with the HERMES spectrograph and combine them with asteroseismology. Therefore, we need to build a solar atlas for the spectrograph, to provide accurate calibrations of the spectroscopically determined abundances of solar and late type stars observed with this instrument and thus perform differential spectral comparisons. We acquire high-resolution and high signal-to-noise spectroscopy to construct three solar reference spectra by observing the reflected light of Vesta and Victoria asteroids and Europa (100<S/N<450) with the \Hermes spectrograph. We then observe the Kepler solar analog KIC3241581 (S/N~170). We constructed three solar spectrum atlases from 385 to 900 nm obtained with the Hermes spectrograph from observations of two bright asteroids and Europa. A comparison between our solar spectra atlas to the Kurucz and HARPS solar spectrum shows an excellent agreement. KIC3241581 was found to be a long-periodic binary system. The fundamental parameter for the stellar primary component are Teff=5689+/-11K, logg=4.385+/-0.005, [Fe/H]=+0.22+/-0.01, being in agreement with the published global seismic values confirming its status of solar analogue. KIC 3241581 is a metal rich solar analogue with a solar-like activity level in a binary system of unknown period. The chromospheric activity level is compatible to the solar magnetic activity.
△ Less
Submitted 20 November, 2015;
originally announced November 2015.
-
Gravity-mode period spacings as seismic diagnostic for a sample of gamma Doradus stars from Kepler space photometry and high-resolution ground-based spectroscopy
Authors:
T. Van Reeth,
A. Tkachenko,
C. Aerts,
P. I. Papics,
S. A. Triana,
K. Zwintz,
P. Degroote,
J. Debosscher,
S. Bloemen,
V. S. Schmid,
K. De Smedt,
Y. Fremat,
A. S. Fuentes,
W. Homan,
M. Hrudkova,
R. Karjalainen,
R. Lombaert,
P. Nemeth,
R. Oestensen,
G. Van De Steene,
J. Vos,
G. Raskin,
H. Van Winckel
Abstract:
Gamma Doradus stars (hereafter gamma Dor stars) are gravity-mode pulsators of spectral type A or F. Such modes probe the deep stellar interior, offering a detailed fingerprint of their structure. Four-year high-precision space-based Kepler photometry of gamma Dor stars has become available, allowing us to study these stars with unprecedented detail. We selected, analysed, and characterized a sampl…
▽ More
Gamma Doradus stars (hereafter gamma Dor stars) are gravity-mode pulsators of spectral type A or F. Such modes probe the deep stellar interior, offering a detailed fingerprint of their structure. Four-year high-precision space-based Kepler photometry of gamma Dor stars has become available, allowing us to study these stars with unprecedented detail. We selected, analysed, and characterized a sample of 67 gamma Dor stars for which we have Kepler observations available. For all the targets in the sample we assembled high-resolution spectroscopy to confirm their F-type nature. We found fourteen binaries, among which four single-lined binaries, five double-lined binaries, two triple systems and three binaries with no detected radial velocity variations. We estimated the orbital parameters whenever possible. For the single stars and the single-lined binaries, fundamental parameter values were determined from spectroscopy. We searched for period spacing patterns in the photometric data and identified this diagnostic for 50 of the stars in the sample, 46 of which are single stars or single-lined binaries. We found a strong correlation between the spectroscopic vsini and the period spacing values, confirming the influence of rotation on gamma Dor-type pulsations as predicted by theory. We also found relations between the dominant g-mode frequency, the longest pulsation period detected in series of prograde modes, vsini, and log Teff.
△ Less
Submitted 8 April, 2015;
originally announced April 2015.
-
Detecting non-uniform period spacings in the Kepler photometry of gamma Doradus stars: methodology and case studies
Authors:
T. Van Reeth,
A. Tkachenko,
C. Aerts,
P. I. Papics,
P. Degroote,
J. Debosscher,
K. Zwintz,
S. Bloemen,
K. De Smedt,
M. Hrudkova,
G. Raskin,
H. Van Winckel
Abstract:
Context. The analysis of stellar oscillations is one of the most reliable ways to probe stellar interiors. Recent space missions such as Kepler have provided us with an opportunity to study these oscillations with unprecedented detail. For many multi-periodic pulsators such as γ Doradus stars, this led to the detection of dozens to hundreds of oscillation frequencies that could not be found from g…
▽ More
Context. The analysis of stellar oscillations is one of the most reliable ways to probe stellar interiors. Recent space missions such as Kepler have provided us with an opportunity to study these oscillations with unprecedented detail. For many multi-periodic pulsators such as γ Doradus stars, this led to the detection of dozens to hundreds of oscillation frequencies that could not be found from ground-based observations. Aims. We aim to detect non-uniform period spacings in the Fourier spectra of a sample of γ Doradus stars observed by Kepler. Such detection is complicated by both the large number of significant frequencies in the space photometry and by overlap** non-equidistant rotationally split multiplets. Methods. Guided by theoretical properties of gravity-mode oscillation of γ Doradus stars, we developed a period-spacing detection method and applied it to Kepler observations of a few stars, after having tested the performance from simulations. Results. The application of the technique resulted in the clear detection of non-uniform period spacing series for three out of the five treated Kepler targets. Disadvantages of the technique are also discussed, and include the disability to distinguish between different values of the spherical degree and azimuthal order of the oscillation modes without additional theoretical modelling. Conclusions. Despite the shortcomings, the method is shown to allow solid detections of period spacings for γ Doradus stars, which will allow future asteroseismic analyses of these stars.
△ Less
Submitted 29 October, 2014;
originally announced October 2014.
-
Binary central stars of planetary nebulae with long orbits: the radial velocity orbit of BD+33.2642 (PN G052.7+50.7) and the orbital motion of HD112313 (PN LoTr5)
Authors:
Hans Van Winckel,
Alain Jorissen,
Katrina Exter,
Gert Raskin,
Saskia Prins,
Jesus Perez Padialla,
Florian Merges,
Gert Raskin
Abstract:
We study the impact of binary interaction processes on the evolution of low- and intermediate-mass stars using long-term monitoring of their radial velocity.
Here we report on our results on the central stars of two planetary nebulae (PNe): the well-studied spectrophotometric standard BD+33.2642 (central star of PNG 052.7+50.7) and HD112313 (central star of PN LoTr5), the optical light of which…
▽ More
We study the impact of binary interaction processes on the evolution of low- and intermediate-mass stars using long-term monitoring of their radial velocity.
Here we report on our results on the central stars of two planetary nebulae (PNe): the well-studied spectrophotometric standard BD+33.2642 (central star of PNG 052.7+50.7) and HD112313 (central star of PN LoTr5), the optical light of which is dominated by a rapidly rotating G star.
The high-resolution spectra were cross-correlated with carefully selected masks of spectral lines. The individual masks were optimised for the spectral signatures of the dominant contributor of the optical light.
We report on the first detection of orbital motion in these two objects. For BD+33.2642 we sampled 1.5 cycles of the 1105 +/- 24 day orbital period. For HD 112313 a full period is not yet covered, despite our 1807 days of monitoring. The radial-velocity amplitude shows that it is unlikely that the orbital plane is co-planar with the one defined by the nebular waist of the bipolar nebula. To our knowledge these are the first detections of orbits in PNe that are in a range from several weeks to a few years.
The orbital properties and chemical composition of BD+33.2642 are similar to what is found in post-AGB binaries with circumbinary discs. The latter are probably progenitors of these PNe. For LoTr5 the Ba-rich central star and the long orbital period are similar to the Ba star giants, which hence serve as natural progeny. In contrast to the central star in LoTr5, normal Ba stars are slow rotators. The orbits of these systems have a low probability of occurrence according to recent population synthesis calculations.
△ Less
Submitted 11 March, 2014;
originally announced March 2014.
-
Large Frame-Transfer Detectors for the MAIA Imager
Authors:
Jesús Pérez Padilla,
Simon Tulloch,
Gert Raskin,
Saskia Prins,
Florian Merges,
Wim Pessemier,
Steven Bloemen
Abstract:
MAIA, the Mercator Advanced Imager for Asteroseismology, is a new fast-cadence 3-channel photometric instrument. It is installed on the 1.2-m Mercator telescope at the Roque de Los Muchachos Observatory in La Palma, Spain. MAIA comprises 3 cameras that simultaneously observe the same 9.4 x 14.1 arcmin field in 3 different colour bands (u, g and r). Each camera is based on a very large frame-transf…
▽ More
MAIA, the Mercator Advanced Imager for Asteroseismology, is a new fast-cadence 3-channel photometric instrument. It is installed on the 1.2-m Mercator telescope at the Roque de Los Muchachos Observatory in La Palma, Spain. MAIA comprises 3 cameras that simultaneously observe the same 9.4 x 14.1 arcmin field in 3 different colour bands (u, g and r). Each camera is based on a very large frame-transfer detector (CCD42-C0) of 2kx6k pixels, specially designed for rapid time-series photometry. These CCDs were originally developed by e2v for ESA's cancelled Eddington space mission and are now on permanent loan to the Institute of Astronomy of the KU Leuven, Belgium. The acquisition system of MAIA uses a single ARC GEN-III controller, custom programmed to allow differing exposure times for each of the three CCDs. Predefined sequences synchronize each read-out with the shortest integration time. Detectors that are not read-out at the end of an exposure continue integrating and can be read-out in one of the subsequent cycles. This read method takes full advantage of the frame-transfer functionality of the CCD42-C0 detectors and allows optimisation of the exposure times for each wavelength band. This then gives a similar exposure depth in each of the 3 arms despite the fact that the UV channel typically sees much less flux. We present the CCD42-C0 detectors, their characterisation, including a thorough analysis of their non-linearity, and the MAIA data-acquisition system.
△ Less
Submitted 13 November, 2013;
originally announced November 2013.
-
Compact Stirling cooling of astronomical detectors
Authors:
Gert Raskin,
Johan Morren,
Wim Pessemier,
Jesus Perez Padilla,
Jeroen Vandersteen
Abstract:
MAIA, a three-channel imager targeting fast cadence photometry, was recently installed on the Mercator telescope (La Palma, Spain). This instrument observes a 9.4 x 14.1 arcmin field of view simultaneously in three color bands ($u$, $g$ and $r$), using three of the largest (un-) available frame-transfer CCDs, namely the 2k x 6k CCD42-C0 from e2v. As these detectors are housed in three separate cry…
▽ More
MAIA, a three-channel imager targeting fast cadence photometry, was recently installed on the Mercator telescope (La Palma, Spain). This instrument observes a 9.4 x 14.1 arcmin field of view simultaneously in three color bands ($u$, $g$ and $r$), using three of the largest (un-) available frame-transfer CCDs, namely the 2k x 6k CCD42-C0 from e2v. As these detectors are housed in three separate cryostats, compact cooling devices are required that offer sufficient power to cool the large chips to a temperature of 165K. We explored a broad spectrum of cooling options and technologies to cool the MAIA detectors. Finally, compact free-piston Stirling coolers were selected, namely the CryoTel MT cryo-coolers from SUNPOWER, that can extract 5W of heat at a temperature of 77K. In this contribution we give details of the MAIA detector cooling solution. We also discuss the general usability of this type of closed-cycle cryo-coolers for astronomical detectors. They offer distinct advantages but the vibrations caused by mechanical cryo-cooling impose a serious drawback. We present a solution to mechanically decouple the coolers from the instrument and show some results of how this reduces the vibrations to a level that is acceptable for most applications on astronomical telescopes.
△ Less
Submitted 4 November, 2013;
originally announced November 2013.
-
A practical approach to ontology-enabled control systems for astronomical instrumentation
Authors:
Wim Pessemier,
Gert Raskin,
Hans Van Winckel,
Geert Deconinck,
Philippe Saey
Abstract:
Even though modern service-oriented and data-oriented architectures promise to deliver loosely coupled control systems, they are inherently brittle as they commonly depend on a priori agreed interfaces and data models. At the same time, the Semantic Web and a whole set of accompanying standards and tools are emerging, advocating ontologies as the basis for knowledge exchange. In this paper we aim…
▽ More
Even though modern service-oriented and data-oriented architectures promise to deliver loosely coupled control systems, they are inherently brittle as they commonly depend on a priori agreed interfaces and data models. At the same time, the Semantic Web and a whole set of accompanying standards and tools are emerging, advocating ontologies as the basis for knowledge exchange. In this paper we aim to identify a number of key ideas from the myriad of knowledge-based practices that can readily be implemented by control systems today. We demonstrate with a practical example (a three-channel imager for the Mercator Telescope) how ontologies developed in the Web Ontology Language (OWL) can serve as a meta-model for our instrument, covering as many engineering aspects of the project as needed. We show how a concrete system model can be built on top of this meta-model via a set of Domain Specific Languages (DSLs), supporting both formal verification and the generation of software and documentation artifacts. Finally we reason how the available semantics can be exposed at run-time by adding a "semantic layer" that can be browsed, queried, monitored etc. by any OPC UA-enabled client.
△ Less
Submitted 21 October, 2013;
originally announced October 2013.
-
HERMES at Mercator, competitive high-resolution spectroscopy with a small telescope
Authors:
Gert Raskin,
Hans Van Winckel
Abstract:
HERMES, a fibre-fed high-resolution (R=85000) echelle spectrograph with good stability and excellent throughput, is the work-horse instrument of the 1.2-m Mercator telescope on La Palma. HERMES targets building up time series of high-quality data of variable stellar phenomena, mainly for asteroseismology and binary-evolution research. In this paper we present the HERMES project and discuss the ins…
▽ More
HERMES, a fibre-fed high-resolution (R=85000) echelle spectrograph with good stability and excellent throughput, is the work-horse instrument of the 1.2-m Mercator telescope on La Palma. HERMES targets building up time series of high-quality data of variable stellar phenomena, mainly for asteroseismology and binary-evolution research. In this paper we present the HERMES project and discuss the instrument design, performance, and a future upgrade. We also present some results of the first four years of HERMES observations. We illustrate the value of small telescopes, equipped with efficient instrumentation, for high-resolution spectroscopy.
△ Less
Submitted 19 October, 2013;
originally announced October 2013.
-
MAIA, a three-channel imager for asteroseismology: instrument design
Authors:
Gert Raskin,
Steven Bloemen,
Johan Morren,
Jesus Perez Padilla,
Saskia Prins,
Wim Pessemier,
Jeroen Vandersteen,
Florian Merges,
Roy Østensen,
Hans Van Winckel,
Conny Aerts
Abstract:
MAIA, an acronym for Mercator Advanced Imager for Asteroseismology, is a three-channel instrument that targets fast-cadence three-colour photometry, installed at the 1.2-m Mercator telescope at the Roque de los Muchachos at La Palma (Canary Islands, Spain). This instrument observes a 9.4x14.1arcmin2 Field-of-View simultaneously in three wavelength bands on three large frame-transfer CCDs. These de…
▽ More
MAIA, an acronym for Mercator Advanced Imager for Asteroseismology, is a three-channel instrument that targets fast-cadence three-colour photometry, installed at the 1.2-m Mercator telescope at the Roque de los Muchachos at La Palma (Canary Islands, Spain). This instrument observes a 9.4x14.1arcmin2 Field-of-View simultaneously in three wavelength bands on three large frame-transfer CCDs. These detectors were developed for ESA's cancelled Eddington space mission and were offered on permanent loan to the Institute of Astronomy (KU Leuven, Belgium). MAIA uses its own ugr photometric system that is a crude approximation of the SDSS system. The instrument is designed to perform multi-colour observations for asteroseismology, with specific emphasis on subdwarf and white dwarf single and binary stars. We describe the design of the instrument, discuss key components, and report on its performance and first results.
△ Less
Submitted 8 October, 2013;
originally announced October 2013.
-
Modelling the asymmetric wind of the luminous blue variable binary MWC 314
Authors:
A. Lobel,
J. H. Groh,
C. Martayan,
Y. Frémat,
K. Torres Dozinel,
G. Raskin,
H. Van Winckel,
S. Prins,
W. Pessemier,
C. Waelkens,
H. Hensberge,
L. Dummortier,
A. Jorissen,
S. Van Eck,
H. Lehmann
Abstract:
We present a spectroscopic analysis of MWC 314, a luminous blue variable (LBV) candidate with an extended bipolar nebula. The detailed spectroscopic variability is investigated to determine if MWC 314 is a massive binary system with a supersonically accelerating wind or a low-mass B[e] star. We compare the spectrum and spectral energy distribution to other LBVs (such as P Cyg) and find very simila…
▽ More
We present a spectroscopic analysis of MWC 314, a luminous blue variable (LBV) candidate with an extended bipolar nebula. The detailed spectroscopic variability is investigated to determine if MWC 314 is a massive binary system with a supersonically accelerating wind or a low-mass B[e] star. We compare the spectrum and spectral energy distribution to other LBVs (such as P Cyg) and find very similar physical wind properties, indicating strong kinship. We combined long-term high-resolution optical spectroscopic monitoring and V-band photometric observations to determine the orbital elements and stellar parameters and to investigate the spectral variability with the orbital phases. We developed an advanced model of the large-scale wind-velocity and wind-density structure with 3-D radiative transfer calculations that fit the orbitally modulated P Cyg profile of He I lam5876, showing outflow velocities above 1000 km/s. We find that MWC 314 is a massive semi-detached binary system of ~1.22 AU, observed at an inclination angle of i=72.8 deg. with an orbital period of 60.8 d and e=0.23. The primary star is a low-vsini LBV candidate of m1=39.6 Msun and R1=86.8 Rsun. The detailed radiative transfer fits show that the geometry of wind density is asymmetric around the primary star with increased wind density by a factor of 3.3, which leads the orbit of the primary. The variable orientation causes the orbital modulation that is observed in absorption portions of P Cyg wind lines. Wind accretion in the system produces a circumbinary disc. MWC 314 is in a crucial evolutionary phase of close binary systems, when the massive primary star has its H envelope being stripped and is losing mass to a circumbinary disc. MWC 314 is a key system for studying the evolutionary consequences of these effects.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Atmospheric Parameters of 169 F, G, K and M-type Stars in the Kepler Field
Authors:
J. Molenda-Zakowicz,
S. G. Sousa,
A. Frasca,
K. Uytterhoeven,
M. Briquet,
H. Van Winckel,
D. Drobek,
E. Niemczura,
P. Lampens,
J. Lykke,
S. Bloemen,
J. F. Gameiro,
C. Jean,
D. Volpi,
N. Gorlova,
A. Mortier,
M. Tsantaki,
G. Raskin
Abstract:
The asteroseismic and planetary studies, like all research related to stars, need precise and accurate stellar atmospheric parameters as input. We aim at deriving the effective temperature (Teff), the surface gravity (log g), the metallicity ([Fe/H]), the projected rotational velocity (v sin i) and the MK type for 169 F, G, K, and M-type Kepler targets which were observed spectroscopically from th…
▽ More
The asteroseismic and planetary studies, like all research related to stars, need precise and accurate stellar atmospheric parameters as input. We aim at deriving the effective temperature (Teff), the surface gravity (log g), the metallicity ([Fe/H]), the projected rotational velocity (v sin i) and the MK type for 169 F, G, K, and M-type Kepler targets which were observed spectroscopically from the ground with five different instruments. We use two different spectroscopic methods to analyse 189 high-resolution, high-signal-to-noise spectra acquired for the 169 stars. For 67 stars, the spectroscopic atmospheric parameters are derived for the first time. KIC 9693187 and 11179629 are discovered to be double-lined spectroscopic binary systems. The results obtained for those stars for which independent determinations of the atmospheric parameters are available in the literature are used for a comparative analysis. As a result, we show that for solar-type stars the accuracy of present determinations of atmospheric parameters is +/- 150 K in Teff, +/- 0.15 dex in [Fe/H], and +/-? 0.3 dex in log g. Finally, we confirm that the curve-of-growth analysis and the method of spectral synthesis yield systematically different atmospheric parameters when they are applied to stars hotter than 6,000 K.
△ Less
Submitted 25 June, 2013;
originally announced June 2013.
-
Detection of a large sample of Gamma Dor stars from Kepler space photometry and high-resolution ground-based spectroscopy
Authors:
A. Tkachenko,
C. Aerts,
A. Yakushechkin,
J. Debosscher,
P. Degroote,
S. Bloemen,
P. I. Papics,
B. L. de Vries,
R. Lombaert,
M. Hrudkova,
Y. Fremat,
G. Raskin,
H. Van Winckel
Abstract:
The space-missions MOST, CoRoT, and Kepler deliver a huge amount of high-quality photometric data suitable to study numerous pulsating stars.
Our ultimate goal is a detection and analysis of an extended sample of Gamma Dor-type pulsating stars with the aim to search for observational evidence of non-uniform period spacings and rotational splittings of gravity modes in main-sequence stars typical…
▽ More
The space-missions MOST, CoRoT, and Kepler deliver a huge amount of high-quality photometric data suitable to study numerous pulsating stars.
Our ultimate goal is a detection and analysis of an extended sample of Gamma Dor-type pulsating stars with the aim to search for observational evidence of non-uniform period spacings and rotational splittings of gravity modes in main-sequence stars typically twice as massive as the Sun.
We applied an automated supervised photometric classification method to select a sample of 69 Gamma Doradus candidate stars. We used an advanced method to extract the Kepler light curves from the pixel data information using custom masks. For 36 of the stars, we obtained high-resolution spectroscopy with the HERMES spectrograph installed at the Mercator telescope.
We find that all stars for which spectroscopic estimates of Teff and logg are available fall into the region of the HR diagram where the Gamma Dor and Delta Sct instability strips overlap. The stars cluster in a 700 K window in effective temperature, logg measurements suggest luminosity class IV-V. From the Kepler photometry, we identify 45 Gamma Dor-type pulsators, 14 Gamma Dor/Delta Sct hybrids, and 10 stars which are classified as "possibly Gamma Dor/Delta Sct hybrid pulsators".
The results of photometric and spectroscopic classifications according to the type of variability are in perfect agreement. We find a clear correlation between the spectroscopically derived vsini and the frequencies of independent pulsation modes and show that it has nothing to do with rotational modulation of the stars but is related to their stellar pulsations. Our sample and frequency determinations offer a good starting point for seismic modelling of slow to moderately rotating Gamma Dor stars.
△ Less
Submitted 29 May, 2013;
originally announced May 2013.
-
High-precision CoRoT space photometry and fundamental parameter determination of the B2.5V star HD 48977
Authors:
Anne Thoul,
Pieter Degroote,
Claude Catala,
Conny Aerts,
Thierry Morel,
Maryline Briquet,
Michel Hillen,
Gert Raskin,
Hans Van Winckel,
Michel Auvergne,
Annie Baglin,
Frédéric Baudin,
Eric Michel
Abstract:
We present the CoRoT light curve of the bright B2.5V star HD 48977 observed during a short run of the mission in 2008, as well as a high-resolution spectrum gathered with the HERMES spectrograph at the Mercator telescope. We use several time series analysis tools to explore the nature of the variations present in the light curve. We perform a detailed analysis of the spectrum of the star to determ…
▽ More
We present the CoRoT light curve of the bright B2.5V star HD 48977 observed during a short run of the mission in 2008, as well as a high-resolution spectrum gathered with the HERMES spectrograph at the Mercator telescope. We use several time series analysis tools to explore the nature of the variations present in the light curve. We perform a detailed analysis of the spectrum of the star to determine its fundamental parameters and its element abundances. We find a large number of high-order g-modes, and one rotationally induced frequency. We find stable low-amplitude frequencies in the p-mode regime as well. We conclude that HD 48977 is a new Slowly Pulsating B star with fundamental parameters found to be Teff = 20000 $\pm$ 1000 K and log(g)=4.2 $/pm$ 0.1. The element abundances are similar to those found for other B stars in the solar neighbourhood. HD 48977 was observed during a short run of the CoRoT satellite implying that the frequency precision is insufficient to perform asteroseismic modelling of the star. Nevertheless, we show that a longer time series of this star would be promising for such modelling. Our present study contributes to a detailed map** of the instability strips of B stars in view of the dominance of g-mode pulsations in the star, several of which occur in the gravito-inertial regime.
△ Less
Submitted 10 December, 2012;
originally announced December 2012.
-
The orbits of subdwarf B + main-sequence binaries. I: The sdB+G0 system PG 1104+243
Authors:
J. Vos,
R. H. Östensen,
P. Degroote,
K. De Smedt,
E. M. Green,
U. Heber,
H. Van Winckel,
B. Acke,
S. Bloemen,
P. De Cat,
K. Exter,
P. Lampens,
R. Lombaert,
T. Masseron,
J. Menu,
P. Neyskens,
G. Raskin,
K. Smolders,
A. Tkachenko,
E. Ringat,
T. Rauch
Abstract:
The predicted orbital period histogram of an sdB population is bimodal with a peak at short (< 10 days) and long (> 250 days) periods. Observationally, there are many short-period sdB systems known, but only very few long-period sdB binaries are identified. As these predictions are based on poorly understood binary interaction processes, it is of prime importance to confront the predictions to obs…
▽ More
The predicted orbital period histogram of an sdB population is bimodal with a peak at short (< 10 days) and long (> 250 days) periods. Observationally, there are many short-period sdB systems known, but only very few long-period sdB binaries are identified. As these predictions are based on poorly understood binary interaction processes, it is of prime importance to confront the predictions to observational data. In this contribution we aim to determine the absolute dimensions of the long-period sdB+MS binary system PG1104+243. High-resolution spectroscopy time-series were obtained with HERMES at the Mercator telescope at La Palma, and analyzed to obtain radial velocities of both components. Photometry from the literature was used to construct the spectral energy distribution (SED) of the binary. Atmosphere models were used to fit this SED and determine the surface gravity and temperature of both components. The gravitational redshift provided an independent confirmation of the surface gravity of the sdB component. An orbital period of 753 +- 3 d and a mass ratio of q = 0.637 +- 0.015 were found from the RV-curves. The sdB component has an effective temperature of Teff = 33500 +- 1200 K and a surface gravity of logg = 5.84 +- 0.08 dex, while the cool companion is found to be a G-type star with Teff = 5930 +- 160 K and logg = 4.29 +- 0.05 dex. Assuming a canonical mass of Msdb = 0.47 Msun, the MS component has a mass of 0.74 +- 0.07 Msun, and its Teff corresponds to what is expected for a terminal age main-sequence star with sub-solar metalicity. PG1104+243 is the first long-period sdB binary in which accurate physical parameters of both components could be determined, and the first sdB binary in which the gravitational redshift is measured. Furthermore, PG1104+243 is the first sdB+MS system that shows consistent evidence for being formed through stable Roche-lobe overflow.
△ Less
Submitted 6 October, 2012;
originally announced October 2012.
-
A multisite photometric study of two unusual Beta Cep stars: the magnetic V2052 Oph and the massive rapid rotator V986 Oph
Authors:
G. Handler,
R. R. Shobbrook,
K. Uytterhoeven,
M. Briquet,
C. Neiner,
T. Tshenye,
B. Ngwato,
H. van Winckel,
E. Guggenberger,
G. Raskin,
E. Rodriguez,
A. Mazumdar,
C. Barban,
D. Lorenz,
B. Vandenbussche,
T. Sahin,
R. Medupe,
C. Aerts
Abstract:
We report a multisite photometric campaign for the Beta Cep stars V2052 Oph and V986 Oph. 670 hours of high-quality differential photoelectric Stromgren, Johnson and Geneva time-series photometry were obtained with eight telescopes on five continents during 182 nights. Frequency analyses of the V2052 Oph data enabled the detection of three pulsation frequencies, the first harmonic of the strongest…
▽ More
We report a multisite photometric campaign for the Beta Cep stars V2052 Oph and V986 Oph. 670 hours of high-quality differential photoelectric Stromgren, Johnson and Geneva time-series photometry were obtained with eight telescopes on five continents during 182 nights. Frequency analyses of the V2052 Oph data enabled the detection of three pulsation frequencies, the first harmonic of the strongest signal, and the rotation frequency with its first harmonic. Pulsational mode identification from analysing the colour amplitude ratios confirms the dominant mode as being radial, whereas the other two oscillations are most likely l=4. Combining seismic constraints on the inclination of the rotation axis with published magnetic field analyses we conclude that the radial mode must be the fundamental. The rotational light modulation is in phase with published spectroscopic variability, and consistent with an oblique rotator for which both magnetic poles pass through the line of sight. The inclination of the rotation axis is 54o <i< 58o and the magnetic obliquity 58o <beta< 66o. The possibility that V2052 Oph has a magnetically confined wind is discussed. The photometric amplitudes of the single oscillation of V986 Oph are most consistent with an l=3 mode, but this identification is uncertain. Additional intrinsic, apparently temporally incoherent, light variations of V986 Oph are reported. Different interpretations thereof cannot be distinguished at this point, but this kind of variability appears to be present in many OB stars. The prospects of obtaining asteroseismic information for more rapidly rotating Beta Cep stars, which appear to prefer modes of higher l, are briefly discussed.
△ Less
Submitted 29 May, 2012;
originally announced May 2012.
-
Detection of gravity modes in the massive binary V380 Cyg from Kepler spacebased photometry and high-resolution spectroscopy
Authors:
A. Tkachenko,
C. Aerts,
K. Pavlovski,
J. Southworth,
P. Degroote,
J. Debosscher,
M. Still,
S. Bryson,
G. Molenberghs,
S. Bloemen,
B. L. de Vries,
M. Hrudkova,
R. Lombaert,
P. Neyskens,
P. I. Papics,
G. Raskin,
H. Van Winckel,
R. L. Morris,
D. T. Sanderfer,
S. E. Seader
Abstract:
We report the discovery of low-amplitude gravity-mode oscillations in the massive binary star V380 Cyg, from 180 d of Kepler custom-aperture space photometry and 5 months of high-resolution high signal-to-noise spectroscopy. The new data are of unprecedented quality and allowed to improve the orbital and fundamental parameters for this binary. The orbital solution was subtracted from the photometr…
▽ More
We report the discovery of low-amplitude gravity-mode oscillations in the massive binary star V380 Cyg, from 180 d of Kepler custom-aperture space photometry and 5 months of high-resolution high signal-to-noise spectroscopy. The new data are of unprecedented quality and allowed to improve the orbital and fundamental parameters for this binary. The orbital solution was subtracted from the photometric data and led to the detection of periodic intrinsic variability with frequencies of which some are multiples of the orbital frequency and others are not. Spectral disentangling allowed the detection of line-profile variability in the primary. With our discovery of intrinsic variability interpreted as gravity mode oscillations, V380 Cyg becomes an important laboratory for future seismic tuning of the near-core physics in massive B-type stars.
△ Less
Submitted 2 May, 2012;
originally announced May 2012.
-
Time resolved spectroscopy of BD+46 442: gas streams and jet creation in a newly discovered evolved binary with a disk
Authors:
N. Gorlova,
H. Van Winckel,
C. Gielen,
G. Raskin,
S. Prins,
W. Pessemier,
C. Waelkens,
Y. Frémat,
H. Hensberge,
L. Dumortier,
A. Jorissen,
S. Van Eck
Abstract:
Previous studies have shown that many post-AGB stars with dusty disks are associated with single-lined binary stars. To verify the binarity hypothesis on a larger sample, we started a high-resolution spectral monitoring of about 40 field giants, whose binarity was suspected based on either a light curve, an infrared excess, or a peculiar chemical composition. Here we report on the discovery of the…
▽ More
Previous studies have shown that many post-AGB stars with dusty disks are associated with single-lined binary stars. To verify the binarity hypothesis on a larger sample, we started a high-resolution spectral monitoring of about 40 field giants, whose binarity was suspected based on either a light curve, an infrared excess, or a peculiar chemical composition. Here we report on the discovery of the periodic RV variations in BD+46 442, a high-latitude F giant with a disk. We interpret the variations due to the motion around a faint companion, and deduce the following orbital parameters: Porb = 140.77 d, e = 0.083, asini=0.31 AU. We find it to be a moderately metal-poor star ([M/H]=-0.7) without a strong depletion pattern in the photospheric abundances. Interestingly, many lines show periodic changes with the orbital phase: Halpha switches between a double-peak emission and a PCyg-like profiles, while strong metal lines appear split during the maximum redshift. Similar effects are likely visible in the spectra of other post-AGB binaries, but their regularity is not always realized due to sporadic observations. We propose that these features result from an ongoing mass transfer from the evolved giant to the companion. In particular, the blue-shifted absorption in Halpha, which occurs only at superior conjunction, may result from a jet originating in the accretion disk around the companion and seen in absorption towards the luminous primary.
△ Less
Submitted 13 April, 2012;
originally announced April 2012.
-
Mass ratio from Doppler beaming and Rømer delay versus ellipsoidal modulation in the Kepler data of KOI-74
Authors:
S. Bloemen,
T. R. Marsh,
P. Degroote,
R. H. Østensen,
P. I. Pápics,
C. Aerts,
D. Koester,
B. T. Gänsicke,
E. Breedt,
R. Lombaert,
S. Pyrzas,
C. M. Copperwheat,
K. Exter,
G. Raskin,
H. Van Winckel,
S. Prins,
W. Pessemier,
Y. Frémat,
H. Hensberge,
A. Jorissen,
S. Van Eck
Abstract:
We present a light curve analysis and radial velocity study of KOI-74, an eclipsing A star + white dwarf binary with a 5.2 day orbit. Aside from new spectroscopy covering the orbit of the system, we used 212 days of publicly available Kepler observations and present the first complete light curve fitting to these data, modelling the eclipses and transits, ellipsoidal modulation, reflection, and Do…
▽ More
We present a light curve analysis and radial velocity study of KOI-74, an eclipsing A star + white dwarf binary with a 5.2 day orbit. Aside from new spectroscopy covering the orbit of the system, we used 212 days of publicly available Kepler observations and present the first complete light curve fitting to these data, modelling the eclipses and transits, ellipsoidal modulation, reflection, and Doppler beaming. Markov Chain Monte Carlo simulations are used to determine the system parameters and uncertainty estimates. Our results are in agreement with earlier studies, except that we find an inclination of 87.0 \pm 0.4\degree, which is significantly lower than the previously published value. We find that the mass ratio derived from the radial velocity amplitude (q=0.104 \pm 0.004) disagrees with that derived from the ellipsoidal modulation (q=0.052 \pm 0.004} assuming corotation). This was found before, but with our smaller inclination, the discrepancy is even larger than previously reported. Accounting for the rapid rotation of the A-star is found to increase the discrepancy even further by lowering the mass ratio to q=0.047 \pm 0.004. These results indicate that one has to be extremely careful in using the amplitude of an ellipsoidal modulation signal in a close binary to determine the mass ratio, when a proof of corotation is not firmly established. The radial velocities that can be inferred from the detected Doppler beaming in the light curve are found to be in agreement with our spectroscopic radial velocity determination. We also report the first measurement of Rømer delay in a light curve of a compact binary. This delay amounts to -56 \pm 17 s and is consistent with the mass ratio derived from the radial velocity amplitude. The firm establishment of this mass ratio at q=0.104 \pm 0.004 leaves little doubt that the companion of KOI-74 is a low mass white dwarf.
△ Less
Submitted 24 February, 2012;
originally announced February 2012.
-
Modeling the Asymmetric Wind of Massive LBV Binary MWC 314
Authors:
A. Lobel,
J. Groh,
K. Torres Dozinel,
N. Gorlova,
C. Martayan,
G. Raskin,
H. Van Winckel,
S. Prins,
W. Pessemier,
C. Waelkens,
Y. Frémat,
H. Hensberge,
L. Dummortier,
A. Jorissen,
S. Van Eck,
H. Lehmann
Abstract:
Spectroscopic monitoring with Mercator-HERMES over the past two years reveals that MWC 314 is a massive binary system composed of an early B-type primary LBV star and a less-luminous supergiant companion. We determine an orbital period Porb of 60.85 d from optical S II and Ne I absorption lines observed in this single-lined spectroscopic binary. We find an orbital eccentricity of e=0.26, and a lar…
▽ More
Spectroscopic monitoring with Mercator-HERMES over the past two years reveals that MWC 314 is a massive binary system composed of an early B-type primary LBV star and a less-luminous supergiant companion. We determine an orbital period Porb of 60.85 d from optical S II and Ne I absorption lines observed in this single-lined spectroscopic binary. We find an orbital eccentricity of e=0.26, and a large amplitude of the radial velocity curve of 80.6 km/s. The ASAS V light-curve during our spectroscopic monitoring reveals two brightness minima (ΔV~0.1 mag.) over the orbital period due to partial eclipses at an orbital inclination angle of ~70 degrees. We find a clear correlation between the orbital phases and the detailed shapes of optical and near-IR P Cygni-type line profiles of He I, Si II, and double- or triple-peaked stationary cores of prominent Fe II emission lines. A preliminary 3-D radiative transfer model computed with Wind3D shows that the periodic P Cygni line profile variability results from an asymmetric common-envelope wind with enhanced density (or line opacity) in the vicinity of the LBV primary. The variable orientation of the inner LBV wind region due to the orbital motion produces variable P Cygni line profiles (with wind velocities of ~200 km/s) between orbital phases φ= 0.65 to 0.85, while weak inverse P Cygni profiles are observed half an orbital period later around φ= 0.15 to 0.35. We do not observe optical or near-IR He II, C III, and Si III lines, signaling that the LBV's spectral type is later than B0. Detailed modeling of the asymmetrical wind properties of massive binary MWC 314 provides important new physical information about the most luminous hot (binary) stars such as Eta Carinae.
△ Less
Submitted 27 December, 2011;
originally announced December 2011.
-
The evolutionary state of Miras with changing pulsation periods
Authors:
Stefan Uttenthaler,
Koen Van Stiphout,
Kevin Voet,
Hans Van Winckel,
Sophie Van Eck,
Alain Jorissen,
Franz Kerschbaum,
Gert Raskin,
Saskia Prins,
Wim Pessemier,
Christoffel Waelkens,
Yves Frémat,
Herman Hensberge,
Louis Dumortier,
Holger Lehmann
Abstract:
Context: Miras are long-period variables thought to be in the asymptotic giant branch (AGB) phase of evolution. In about one percent of known Miras, the pulsation period is changing. It has been speculated that this changing period is the consequence of a recent thermal pulse in these stars. Aims: We aim to clarify the evolutionary state of these stars, and to determine in particular whether or no…
▽ More
Context: Miras are long-period variables thought to be in the asymptotic giant branch (AGB) phase of evolution. In about one percent of known Miras, the pulsation period is changing. It has been speculated that this changing period is the consequence of a recent thermal pulse in these stars. Aims: We aim to clarify the evolutionary state of these stars, and to determine in particular whether or not they are in the thermally-pulsing (TP-)AGB phase. Methods: One important piece of information that has been neglected so far when determining the evolutionary state is the presence of the radio-active s-process element technetium (Tc). We obtained high-resolution, high signal-to-noise-ratio optical spectra of a dozen prominent Mira variables with changing pulsation period to search for this indicator of TPs and dredge-up. We also use the spectra to measure lithium (Li) abundances. Furthermore, we establish the evolutionary states of our sample stars by means of their present-day periods and luminosities. Results: Among the twelve sample stars observed in this programme, five were found to show absorption lines of Tc. BH Cru is found to be a carbon-star, its period increase in the past decades possibly having stopped by now. We report a possible switch in the pulsation mode of T UMi from Mira-like to semi-regular variability in the past two years. R Nor, on the other hand, is probably a fairly massive AGB star, which could be true for all meandering Miras. Finally, we assign RU Vul to the metal-poor thick disk with properties very similar to the short-period, metal-poor Miras. Conclusions: We conclude that there is no clear correlation between period change class and Tc presence. The stars that are most likely to have experienced a recent TP are BH Cru and R Hya, although their rates of period change are quite different.
△ Less
Submitted 30 May, 2011; v1 submitted 11 May, 2011;
originally announced May 2011.
-
HERMES high-resolution spectroscopy of HD 149382. Where did the planet go?
Authors:
V. A. Jacobs,
R. H. Østensen,
H. Van Winckel,
S. Bloemen,
P. I. Pápics,
G. Raskin,
J. Debosscher,
S. Uttenthaler,
E. Van Aarle,
C. Waelkens,
E. Bauwens,
T. Verhoelst,
C. Gielen,
H. Lehmann,
R. Oreiro
Abstract:
A close substellar companion has been claimed to orbit the bright sdB star HD 149382 with a period of 2.391d. In order to check this important discovery we gathered 26 high resolution spectra over 55 days with the HERMES spectrograph on the 1.2m Mercator telescope on La Palma, and analyzed the resulting radial velocities. Our data show no sign of any significant radial-velocity periodicities, and…
▽ More
A close substellar companion has been claimed to orbit the bright sdB star HD 149382 with a period of 2.391d. In order to check this important discovery we gathered 26 high resolution spectra over 55 days with the HERMES spectrograph on the 1.2m Mercator telescope on La Palma, and analyzed the resulting radial velocities. Our data show no sign of any significant radial-velocity periodicities, and from the high precision of our measurements we rule out any RV variations with amplitudes higher than 0.79 km/s on periods shorter than 50 days.
△ Less
Submitted 21 January, 2011;
originally announced January 2011.
-
Chemically tagging the Hyades stream: Does it partly originate from the Hyades cluster?
Authors:
L. Pompéia,
T. Masseron,
B. Famaey,
S. Van Eck,
A. Jorissen,
I. Minchev,
A. Siebert,
C. Sneden,
J. R. D. Lépine,
C. Siopis,
G. Gentile,
T. Dermine,
E. Pasquato,
H. Van Winckel,
C. Waelkens,
G. Raskin,
S. Prins,
W. Pessemier,
H. Hensberge,
Y. Frémat,
L. Dumortier,
O. Bienaymé
Abstract:
The Hyades stream has long been thought to be a dispersed vestige of the Hyades cluster. However, recent analyses of the parallax distribution, of the mass function, and of the action-space distribution of stream stars have shown it to be rather composed of orbits trapped at a resonance of a density disturbance. This resonant scenario should leave a clearly different signature in the element abund…
▽ More
The Hyades stream has long been thought to be a dispersed vestige of the Hyades cluster. However, recent analyses of the parallax distribution, of the mass function, and of the action-space distribution of stream stars have shown it to be rather composed of orbits trapped at a resonance of a density disturbance. This resonant scenario should leave a clearly different signature in the element abundances of stream stars than the dispersed cluster scenario, since the Hyades cluster is chemically homogeneous. Here, we study the metalllicty as well as the element abundances of Li, Na, Mg, Fe, Zr, Ba, La, Ce, Nd, and Eu for a random sample of stars belonging to the Hyades stream, and compare them with those of stars from the Hyades cluster. From this analysis: (i) we independently confirm that the Hyades stream cannot be solely composed of stars originating in the Hyades cluster; (ii) we show that some stars from the Hyades stream nevertheless have abundances compatible with an origin in the cluster; (iii) we emphasize that the use of Li as a chemical tag of the cluster origin of main-sequence stars is very efficient in the range 5500 - 6200 K, since the Li sequence in the Hyades cluster is very tight; (iv) we show that, while this evaporated population has a metallicity excess of ~0.2 dex w.r.t. the local thin disk population, identical to that of the Hyades cluster, the remainder of the Hyades stream population has still a metallicity excess of ~0.06 to 0.15 dex, consistent with an origin in the inner Galaxy; (v) we show that the Hyades stream can be interpreted as an inner 4:1 resonance of the spiral pattern: this then also reproduces an orbital family compatible with the Sirius stream, and places the origin of the Hyades stream up to 1 kpc inwards from the solar radius, which might explain the observed metallicity excess of the stream population.
△ Less
Submitted 11 March, 2011; v1 submitted 13 January, 2011;
originally announced January 2011.