-
Hybrid Beamforming for 5G Millimeter-Wave Multi-Cell Networks
Authors:
Shu Sun,
Theodore S. Rappaport,
Mansoor Shafi
Abstract:
Multi-cell wireless systems usually suffer both intra-cell and inter-cell interference, which can be mitigated via coordinated multipoint (CoMP) techniques. Previous works on multi-cell analysis for the microwave band generally consider fully digital beamforming that requires a complete radio-frequency chain behind each antenna, which is less practical for millimeter-wave (mmWave) systems where la…
▽ More
Multi-cell wireless systems usually suffer both intra-cell and inter-cell interference, which can be mitigated via coordinated multipoint (CoMP) techniques. Previous works on multi-cell analysis for the microwave band generally consider fully digital beamforming that requires a complete radio-frequency chain behind each antenna, which is less practical for millimeter-wave (mmWave) systems where large amounts of antennas are necessary to provide sufficient beamforming gain and to enable transmission and reception of multiple data streams per user. This paper proposes four analog and digital hybrid beamforming schemes for multi-cell multi-user multi-stream mmWave communication, leveraging CoMP. Spectral efficiency performances of the proposed hybrid beamforming approaches are investigated and compared using both the 3rd Generation Partnership Project and NYUSIM channel models. Simulation results show that CoMP based on maximizing signal-to-leakage-plus-noise ratio can improve spectral efficiency as compared to the no-coordination case, and spectral efficiency gaps between different beamforming approaches depend on the interference level that is influenced by the cell radius and the number of users per cell.
△ Less
Submitted 11 March, 2018;
originally announced March 2018.
-
Base Station Diversity Propagation Measurements at 73 GHz Millimeter-Wave for 5G Coordinated Multipoint (CoMP) Analysis
Authors:
George R. MacCartney Jr.,
Theodore S. Rappaport,
Amitava Ghosh
Abstract:
This paper describes wideband (1 GHz) base station diversity and coordinated multipoint (CoMP)-style large-scale measurements at 73 GHz in an urban microcell open square scenario in downtown Brooklyn, New York on the NYU campus. The measurements consisted of ten random receiver locations at pedestrian level (1.4 meters) and ten random transmitter locations at lamppost level (4.0 meters) that provi…
▽ More
This paper describes wideband (1 GHz) base station diversity and coordinated multipoint (CoMP)-style large-scale measurements at 73 GHz in an urban microcell open square scenario in downtown Brooklyn, New York on the NYU campus. The measurements consisted of ten random receiver locations at pedestrian level (1.4 meters) and ten random transmitter locations at lamppost level (4.0 meters) that provided 36 individual transmitter-receiver (TX-RX) combinations. For each of the 36 radio links, extensive directional measurements were made to give insights into small-cell base station diversity at millimeter-wave (mmWave) bands. High-gain steerable horn antennas with 7-degree and 15-degree half-power beamwidths (HPBW) were used at the transmitter (TX) and receiver (RX), respectively. For each TX-RX combination, the TX antenna was scanned over a 120-degree sector and the RX antenna was scanned over the entire azimuth plane at the strongest RX elevation plane and two other elevation planes on both sides of the strongest elevation angle, separated by the 15-degree HPBW. Directional and omnidirectional path loss models were derived and match well with the literature. Signal reception probabilities derived from the measurements for one to five base stations that served a single RX location show significant coverage improvement over all potential beamformed RX antenna pointing angles. CDFs for nearest neighbor and Best-N omnidirectional path loss and cell outage probabilities for directional antennas provide insights into coverage and interference for future mmWave small-cells that will exploit macro-diversity and CoMP.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Rapid Fading Due to Human Blockage in Pedestrian Crowds at 5G Millimeter-Wave Frequencies
Authors:
George R. MacCartney Jr.,
Theodore S. Rappaport,
Sundeep Rangan
Abstract:
Rapidly fading channels caused by pedestrians in dense urban environments will have a significant impact on millimeter-wave (mmWave) communications systems that employ electrically-steerable and narrow beamwidth antenna arrays. A peer-to-peer (P2P) measurement campaign was conducted with 7-degree, 15-degree, and 60-degree half-power beamwidth (HPBW) antenna pairs at 73.5 GHz and with 1 GHz of RF n…
▽ More
Rapidly fading channels caused by pedestrians in dense urban environments will have a significant impact on millimeter-wave (mmWave) communications systems that employ electrically-steerable and narrow beamwidth antenna arrays. A peer-to-peer (P2P) measurement campaign was conducted with 7-degree, 15-degree, and 60-degree half-power beamwidth (HPBW) antenna pairs at 73.5 GHz and with 1 GHz of RF null-to-null bandwidth in a heavily populated open square scenario in Brooklyn, New York, to study blockage events caused by typical pedestrian traffic. Antenna beamwidths that range approximately an order of magnitude were selected to gain knowledge of fading events for antennas with different beamwidths since antenna patterns for mmWave systems will be electronically-adjustable. Two simple modeling approaches in the literature are introduced to characterize the blockage events by either a two-state Markov model or a four-state piecewise linear modeling approach. Transition probability rates are determined from the measurements and it is shown that average fade durations with a -5 dB threshold are 299.0 ms for 7-degree HPBW antennas and 260.2 ms for 60-degree HPBW antennas. The four-state piecewise linear modeling approach shows that signal strength decay and rise times are asymmetric for blockage events and that mean signal attenuations (average fade depths) are inversely proportional to antenna HPBW, where 7-degree and 60-degree HPBW antennas resulted in mean signal fades of 15.8 dB and 11.5 dB, respectively. The models presented herein are valuable for extending statistical channel models at mmWave to accurately simulate real-world pedestrian blockage events when designing fifth-generation (5G) wireless systems.
△ Less
Submitted 7 November, 2017; v1 submitted 18 September, 2017;
originally announced September 2017.
-
Overview of Millimeter Wave Communications for Fifth-Generation (5G) Wireless Networks-with a focus on Propagation Models
Authors:
Theodore S. Rappaport,
Yunchou Xing,
George R. MacCartney, Jr.,
Andreas F. Molisch,
Evangelos Mellios,
Jianhua Zhang
Abstract:
This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are presented, and the channel modeling efforts of many international groups for both licensed and unlicensed applications are described here. Propagation parameters and cha…
▽ More
This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are presented, and the channel modeling efforts of many international groups for both licensed and unlicensed applications are described here. Propagation parameters and channel models for understanding mmWave propagation, such as line-of-sight (LOS) probabilities, large-scale path loss, and building penetration loss, as modeled by various standardization bodies, are compared over the 0.5-100 GHz range.
△ Less
Submitted 24 July, 2017;
originally announced August 2017.
-
Small-Scale, Local Area, and Transitional Millimeter Wave Propagation for 5G Communications
Authors:
Theodore S. Rappaport,
George R. MacCartney Jr.,
Shu Sun,
Hangsong Yan,
Sijia Deng
Abstract:
This paper studies radio propagation mechanisms that impact handoffs, air interface design, beam steering, and MIMO for 5G mobile communication systems. Knife edge diffraction (KED) and a cree** wave linear model are shown to predict diffraction loss around typical building objects from 10 to 26 GHz, and human blockage measurements at 73 GHz are shown to fit a double knife-edge diffraction (DKED…
▽ More
This paper studies radio propagation mechanisms that impact handoffs, air interface design, beam steering, and MIMO for 5G mobile communication systems. Knife edge diffraction (KED) and a cree** wave linear model are shown to predict diffraction loss around typical building objects from 10 to 26 GHz, and human blockage measurements at 73 GHz are shown to fit a double knife-edge diffraction (DKED) model which incorporates antenna gains. Small-scale spatial fading of millimeter wave received signal voltage amplitude is generally Ricean-distributed for both omnidirectional and directional receive antenna patterns under both line-of-sight (LOS) and non-line-of-sight (NLOS) conditions in most cases, although the log-normal distribution fits measured data better for the omnidirectional receive antenna pattern in the NLOS environment. Small-scale spatial autocorrelations of received voltage amplitudes are shown to fit sinusoidal exponential and exponential functions for LOS and NLOS environments, respectively, with small decorrelation distances of 0.27 cm to 13.6 cm (smaller than the size of a handset) that are favorable for spatial multiplexing. Local area measurements using cluster and route scenarios show how the received signal changes as the mobile moves and transitions from LOS to NLOS locations, with reasonably stationary signal levels within clusters. Wideband mmWave power levels are shown to fade from 0.4 dB/ms to 40 dB/s, depending on travel speed and surroundings.
△ Less
Submitted 15 August, 2017; v1 submitted 25 July, 2017;
originally announced July 2017.
-
Investigation and Comparison of 3GPP and NYUSIM Channel Models for 5G Wireless Communications
Authors:
Theodore S. Rappaport,
Shu Sun,
Mansoor Shafi
Abstract:
Channel models describe how wireless channel parameters behave in a given scenario, and help evaluate link- and system-level performance. A proper channel model should be able to faithfully reproduce the channel parameters obtained in field measurements and accurately predict the spatial and temporal channel impulse response along with large-scale fading. This paper compares two popular channel mo…
▽ More
Channel models describe how wireless channel parameters behave in a given scenario, and help evaluate link- and system-level performance. A proper channel model should be able to faithfully reproduce the channel parameters obtained in field measurements and accurately predict the spatial and temporal channel impulse response along with large-scale fading. This paper compares two popular channel models for next generation wireless communications: the 3rd Generation Partnership Project (3GPP) TR 38.900 Release 14 channel model and the statistical spatial channel model NYUSIM developed by New York University (NYU). The two channel models employ different modeling approaches in many aspects, such as the line-of-sight probability, path loss, and clustering methodology. Simulations are performed using the two channel models to analyze the channel eigenvalue distribution and spectral efficiency leveraging the analog/digital hybrid beamforming methods found in the literature. Simulation results show that the 3GPP model produces different eigenvalue and spectral efficiency distributions for mmWave bands, as compared to the outcome from NYUSIM that is based on massive amounts of real-world measured data in New York City. This work shows NYUSIM is more accurate for realistic simulations than 3GPP in urban environments.
△ Less
Submitted 10 July, 2017; v1 submitted 2 July, 2017;
originally announced July 2017.
-
Study on 3GPP Rural Macrocell Path Loss Models for Millimeter Wave Wireless Communications
Authors:
George R. MacCartney Jr.,
Theodore S. Rappaport
Abstract:
Little research has been done to reliably model millimeter wave (mmWave) path loss in rural macrocell settings, yet, models have been hastily adopted without substantial empirical evidence. This paper studies past rural macrocell (RMa) path loss models and exposes concerns with the current 3rd Generation Partnership Project (3GPP) TR 38.900 (Release 14) RMa path loss models adopted from the Intern…
▽ More
Little research has been done to reliably model millimeter wave (mmWave) path loss in rural macrocell settings, yet, models have been hastily adopted without substantial empirical evidence. This paper studies past rural macrocell (RMa) path loss models and exposes concerns with the current 3rd Generation Partnership Project (3GPP) TR 38.900 (Release 14) RMa path loss models adopted from the International Telecommunications Union - Radiocommunications (ITU-R) Sector. This paper shows how the 3GPP RMa large-scale path loss models were derived for frequencies below 6 GHz, yet they are being asserted for use up to 30 GHz, even though there has not been sufficient work or published data to support their validity at frequencies above 6 GHz or in the mmWave bands. We present the background of the 3GPP RMa path loss models and their use of odd correction factors not suitable for rural scenarios, and show that the multi-frequency close-in free space reference distance (CI) path loss model is more accurate and reliable than current 3GPP and ITU-R RMa models. Using field data and simulations, we introduce a new close-in free space reference distance with height dependent path loss exponent model (CIH), that predicts rural macrocell path loss using an effective path loss exponent that is a function of base station antenna height. This work shows the CI and CIH models can be used from 500 MHz to 100 GHz for rural mmWave coverage and interference analysis, without any discontinuity at 6 GHz as exists in today's 3GPP and ITU-R RMa models.
△ Less
Submitted 29 March, 2017;
originally announced March 2017.
-
Millimeter Wave Small-Scale Spatial Statistics in an Urban Microcell Scenario
Authors:
Shu Sun,
Hangsong Yan,
George R. MacCartney Jr.,
Theodore S. Rappaport
Abstract:
This paper presents outdoor wideband small-scale spatial fading and autocorrelation measurements and results in the 73 GHz millimeter-wave (mmWave) band conducted in downtown Brooklyn, New York. Both directional and omnidirectional receiver (RX) antennas are studied. Two pairs of transmitter (TX) and RX locations were tested with one line-of-sight (LOS) and one non-line-of-sight (NLOS) environment…
▽ More
This paper presents outdoor wideband small-scale spatial fading and autocorrelation measurements and results in the 73 GHz millimeter-wave (mmWave) band conducted in downtown Brooklyn, New York. Both directional and omnidirectional receiver (RX) antennas are studied. Two pairs of transmitter (TX) and RX locations were tested with one line-of-sight (LOS) and one non-line-of-sight (NLOS) environment, where a linear track was employed at each RX to move the antenna in half-wavelength increments. Measured data reveal that the small-scale spatial fading of the received signal voltage amplitude are generally Ricean-distributed for both omnidirectional and directional RX antenna patterns under both LOS and NLOS conditions in most cases, except for the log-normal distribution for the omnidirectional RX antenna pattern in the NLOS environment. Sinusoidal exponential and typical exponential functions are found to model small-scale spatial autocorrelation of the received signal voltage amplitude in LOS and NLOS environments in most cases, respectively. Furthermore, different decorrelation distances were observed for different RX track orientations, i.e., for different directions of motion relative to the TX. Results herein are valuable for characterizing small-scale spatial fading and autocorrelation properties in multiple-input multiple-output (MIMO) systems for fifth-generation (5G) mmWave frequencies.
△ Less
Submitted 31 March, 2017; v1 submitted 23 March, 2017;
originally announced March 2017.
-
A Novel Millimeter-Wave Channel Simulator and Applications for 5G Wireless Communications
Authors:
Shu Sun,
George R. MacCartney Jr.,
Theodore S. Rappaport
Abstract:
This paper presents details and applications of a novel channel simulation software named NYUSIM, which can be used to generate realistic temporal and spatial channel responses to support realistic physical- and link-layer simulations and design for fifth-generation (5G) cellular communications. NYUSIM is built upon the statistical spatial channel model for broadband millimeter-wave (mmWave) wirel…
▽ More
This paper presents details and applications of a novel channel simulation software named NYUSIM, which can be used to generate realistic temporal and spatial channel responses to support realistic physical- and link-layer simulations and design for fifth-generation (5G) cellular communications. NYUSIM is built upon the statistical spatial channel model for broadband millimeter-wave (mmWave) wireless communication systems developed by researchers at New York University (NYU). The simulator is applicable for a wide range of carrier frequencies (500 MHz to 100 GHz), radio frequency (RF) bandwidths (0 to 800 MHz), antenna beamwidths (7 to 360 degrees for azimuth and 7 to 45 degrees for elevation), and operating scenarios (urban microcell, urban macrocell, and rural macrocell), and also incorporates multiple-input multiple-output (MIMO) antenna arrays at the transmitter and receiver. This paper also provides examples to demonstrate how to use NYUSIM for analyzing MIMO channel conditions and spectral efficiencies, which show that NYUSIM is an alternative and more realistic channel model compared to the 3rd Generation Partnership Project (3GPP) and other channel models for mmWave bands.
△ Less
Submitted 31 March, 2017; v1 submitted 23 March, 2017;
originally announced March 2017.
-
Millimeter Wave MIMO Channel Estimation Based on Adaptive Compressed Sensing
Authors:
Shu Sun,
Theodore S. Rappaport
Abstract:
Multiple-input multiple-output (MIMO) systems are well suited for millimeter-wave (mmWave) wireless communications where large antenna arrays can be integrated in small form factors due to tiny wavelengths, thereby providing high array gains while supporting spatial multiplexing, beamforming, or antenna diversity. It has been shown that mmWave channels exhibit sparsity due to the limited number of…
▽ More
Multiple-input multiple-output (MIMO) systems are well suited for millimeter-wave (mmWave) wireless communications where large antenna arrays can be integrated in small form factors due to tiny wavelengths, thereby providing high array gains while supporting spatial multiplexing, beamforming, or antenna diversity. It has been shown that mmWave channels exhibit sparsity due to the limited number of dominant propagation paths, thus compressed sensing techniques can be leveraged to conduct channel estimation at mmWave frequencies. This paper presents a novel approach of constructing beamforming dictionary matrices for sparse channel estimation using the continuous basis pursuit (CBP) concept, and proposes two novel low-complexity algorithms to exploit channel sparsity for adaptively estimating multipath channel parameters in mmWave channels. We verify the performance of the proposed CBP-based beamforming dictionary and the two algorithms using a simulator built upon a three-dimensional mmWave statistical spatial channel model, NYUSIM, that is based on real-world propagation measurements. Simulation results show that the CBP-based dictionary offers substantially higher estimation accuracy and greater spectral efficiency than the grid-based counterpart introduced by previous researchers, and the algorithms proposed here render better performance but require less computational effort compared with existing algorithms.
△ Less
Submitted 31 March, 2017; v1 submitted 23 March, 2017;
originally announced March 2017.
-
A Flexible Wideband Millimeter-Wave Channel Sounder with Local Area and NLOS to LOS Transition Measurements
Authors:
George R. MacCartney Jr.,
Hangsong Yan,
Shu Sun,
Theodore S. Rappaport
Abstract:
This paper presents a millimeter-wave (mmWave) wideband sliding correlator channel sounder with flexibility to operate at various transmission rates. The channel sounder can transmit and receive up to 1 GHz of RF null-to-null bandwidth while measuring a 2 nanosecond multipath time resolution. The system architecture takes advantage of field-programmable gate arrays (FPGAs), high-speed digital-to-a…
▽ More
This paper presents a millimeter-wave (mmWave) wideband sliding correlator channel sounder with flexibility to operate at various transmission rates. The channel sounder can transmit and receive up to 1 GHz of RF null-to-null bandwidth while measuring a 2 nanosecond multipath time resolution. The system architecture takes advantage of field-programmable gate arrays (FPGAs), high-speed digital-to-analog converters (DACs), and low phase noise Rubidium (Rb) references for synchronization. Using steerable narrowbeam antennas, the system can measure up to 185 dB of path loss. The channel sounder is used to measure the directional and omnidirectional received power as a receiver transitions from line-of-sight to non-line-of-sight conditions down an urban canyon. A 25 dB drop in omnidirectional received power was observed as the receiver transitioned from line-of-sight (LOS) conditions to deeply shadowed non-LOS (NLOS) conditions. The channel sounder was also used to study signal variation and spatial consistency for a local set of receiver locations arranged in a cluster spanning a 5 m x 10 m local area, where the omnidirectional received power in LOS and NLOS environments is found to be relatively stable with standard deviations of received power of 2.2 dB and 4.3 dB, respectively. This work shows that when implementing beamforming at the transmitter at mmWave, the omnidirectional received power over a local area has little fluctuation among receiver locations separated by a few to several meters.
△ Less
Submitted 23 March, 2017;
originally announced March 2017.
-
Indoor Office Wideband Penetration Loss Measurements at 73 GHz
Authors:
Jacqueline Ryan,
George R. MacCartney Jr.,
Theodore S. Rappaport
Abstract:
This paper presents millimeter wave (mmWave) penetration loss measurements and analysis at 73 GHz using a wideband sliding correlator channel sounder in an indoor office environment. Penetration loss was measured using a carefully controlled measurement setup for many common indoor building materials such as glass doors, glass windows, closet doors, steel doors, and whiteboard writing walls. Measu…
▽ More
This paper presents millimeter wave (mmWave) penetration loss measurements and analysis at 73 GHz using a wideband sliding correlator channel sounder in an indoor office environment. Penetration loss was measured using a carefully controlled measurement setup for many common indoor building materials such as glass doors, glass windows, closet doors, steel doors, and whiteboard writing walls. Measurements were conducted using narrowbeam transmitter (TX) and receiver (RX) horn antennas that were boresight-aligned with a test material between the antennas. Overall, 21 different locations were measured for 6 different materials such that the same type of material was tested in at least two locations in order to characterize the effect of penetration loss for materials with similar composition. As shown here, attenuation through common materials ranged between 0.8 dB/cm and 9.9 dB/cm for co-polarized antennas, while cross-polarized antennas exhibited similar attenuation for most materials, but up to 23.4 dB/cm of attenuation for others. The penetration loss results presented here are useful for site-specific planning tools that will model indoor mmWave networks, without the need for expensive measurement campaigns.
△ Less
Submitted 30 May, 2017; v1 submitted 23 March, 2017;
originally announced March 2017.
-
Millimeter Wave Wireless Communications: New Results for Rural Connectivity
Authors:
George R. MacCartney Jr.,
Shu Sun,
Theodore S. Rappaport,
Yunchou Xing,
Hangsong Yan,
Jeton Koka,
Ruichen Wang,
Dian Yu
Abstract:
This paper shows the remarkable distances that can be achieved using millimeter wave communications, and presents a new rural macrocell (RMa) path loss model for millimeter wave frequencies, based on measurements at 73 GHz in rural Virginia. Path loss models are needed to estimate signal coverage and interference for wireless network design, yet little is known about rural propagation at millimete…
▽ More
This paper shows the remarkable distances that can be achieved using millimeter wave communications, and presents a new rural macrocell (RMa) path loss model for millimeter wave frequencies, based on measurements at 73 GHz in rural Virginia. Path loss models are needed to estimate signal coverage and interference for wireless network design, yet little is known about rural propagation at millimeter waves. This work identifies problems with the RMa model used by the 3rd Generation Partnership Project (3GPP) TR 38.900 Release 14, and offers a close-in (CI) reference distance model that has improved accuracy, fewer parameters, and better stability as compared with the existing 3GPP RMa path loss model. The measurements and models presented here are the first to validate rural millimeter wave path loss models.
△ Less
Submitted 18 August, 2016; v1 submitted 18 August, 2016;
originally announced August 2016.
-
Millimeter-Wave Human Blockage at 73 GHz with a Simple Double Knife-Edge Diffraction Model and Extension for Directional Antennas
Authors:
George R. MacCartney Jr.,
Sijia Deng,
Shu Sun,
Theodore S. Rappaport
Abstract:
This paper presents 73 GHz human blockage measurements for a point-to-point link with a 5 m transmitter-receiver separation distance in an indoor environment, with a human that walked at a speed of approximately 1 m/s at a perpendicular orientation to the line between the transmitter and receiver, at various distances between them. The experiment measures the shadowing effect of a moving human bod…
▽ More
This paper presents 73 GHz human blockage measurements for a point-to-point link with a 5 m transmitter-receiver separation distance in an indoor environment, with a human that walked at a speed of approximately 1 m/s at a perpendicular orientation to the line between the transmitter and receiver, at various distances between them. The experiment measures the shadowing effect of a moving human body when using directional antennas at the transmitter and receiver for millimeter-wave radio communications. The measurements were conducted using a 500 Megachips-per-second wideband correlator channel sounder with a 1 GHz first null-to-null RF bandwidth. Results indicate high shadowing attenuation is not just due to the human blocker but also is due to the static directional nature of the antennas used, leading to the need for phased-array antennas to switch beam directions in the presence of obstructions and blockages at millimeter-waves. A simple model for human blockage is provided based on the double knife-edge diffraction (DKED) model where humans are approximated by a rectangular screen with infinite vertical height, similar to the human blockage model given by the METIS project.
△ Less
Submitted 14 September, 2016; v1 submitted 1 July, 2016;
originally announced July 2016.
-
Investigation of Prediction Accuracy, Sensitivity, and Parameter Stability of Large-Scale Propagation Path Loss Models for 5G Wireless Communications
Authors:
Shu Sun,
Theodore S. Rappaport,
Timothy A. Thomas,
Amitava Ghosh,
Huan C. Nguyen,
Istvan Z. Kovacs,
Ignacio Rodriguez,
Ozge Koymen,
Andrzej Partyka
Abstract:
This paper compares three candidate large-scale propagation path loss models for use over the entire microwave and millimeter-wave (mmWave) radio spectrum: the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference distance model, and the CI model with a frequency-weighted path loss exponent (CIF). Each of these models have been recently studied for use in standards bodies such as 3G…
▽ More
This paper compares three candidate large-scale propagation path loss models for use over the entire microwave and millimeter-wave (mmWave) radio spectrum: the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference distance model, and the CI model with a frequency-weighted path loss exponent (CIF). Each of these models have been recently studied for use in standards bodies such as 3GPP, and for use in the design of fifth generation (5G) wireless systems in urban macrocell, urban microcell, and indoor office and shop** mall scenarios. Here we compare the accuracy and sensitivity of these models using measured data from 30 propagation measurement datasets from 2 GHz to 73 GHz over distances ranging from 4 m to 1238 m. A series of sensitivity analyses of the three models show that the physically-based two-parameter CI model and three-parameter CIF model offer computational simplicity, have very similar goodness of fit (i.e., the shadow fading standard deviation), exhibit more stable model parameter behavior across frequencies and distances, and yield smaller prediction error in sensitivity testing across distances and frequencies, when compared to the four-parameter ABG model. Results show the CI model with a 1 m close-in reference distance is suitable for outdoor environments, while the CIF model is more appropriate for indoor modeling. The CI and CIF models are easily implemented in existing 3GPP models by making a very subtle modification -- by replacing a floating non-physically based constant with a frequency-dependent constant that represents free space path loss in the first meter of propagation.
△ Less
Submitted 10 June, 2016; v1 submitted 14 March, 2016;
originally announced March 2016.
-
Indoor 5G 3GPP-like Channel Models for Office and Shop** Mall Environments
Authors:
Katsuyuki Haneda,
Lei Tian,
Henrik Asplund,
Jian Li,
Yi Wang,
David Steer,
Clara Li,
Tommaso Balercia,
Sunguk Lee,
YoungSuk Kim,
Amitava Ghosh,
Timothy Thomas,
Takehiro Nakamura,
Yuichi Kakishima,
Tetsuro Imai,
Haralabos Papadopoulas,
Theodore S. Rappaport,
George R. MacCartney Jr.,
Mathew K. Samimi,
Shu Sun,
Ozge Koymen,
Sooyoung Hur,
Jeongho Park,
Charlie Zhang,
Evangelos Mellios
, et al. (3 additional authors not shown)
Abstract:
Future mobile communications systems are likely to be very different to those of today with new service innovations driven by increasing data traffic demand, increasing processing power of smart devices and new innovative applications. To meet these service demands the telecommunications industry is converging on a common set of 5G requirements which includes network speeds as high as 10 Gbps, cel…
▽ More
Future mobile communications systems are likely to be very different to those of today with new service innovations driven by increasing data traffic demand, increasing processing power of smart devices and new innovative applications. To meet these service demands the telecommunications industry is converging on a common set of 5G requirements which includes network speeds as high as 10 Gbps, cell edge rate greater than 100 Mbps, and latency of less than 1 msec. To reach these 5G requirements the industry is looking at new spectrum bands in the range up to 100 GHz where there is spectrum availability for wide bandwidth channels. For the development of new 5G systems to operate in bands up to 100 GHz there is a need for accurate radio propagation models which are not addressed by existing channel models developed for bands below 6 GHz. This paper presents a preliminary overview of the 5G channel models for bands up to 100 GHz in indoor offices and shop** malls, derived from extensive measurements across a multitude of bands. These studies have found some extensibility of the existing 3GPP models to the higher frequency bands up to 100 GHz. The measurements indicate that the smaller wavelengths introduce an increased sensitivity of the propagation models to the scale of the environment and show some frequency dependence of the path loss as well as increased occurrence of blockage. Further, the penetration loss is highly dependent on the material and tends to increase with frequency. The small-scale characteristics of the channel such as delay spread and angular spread and the multipath richness is somewhat similar over the frequency range, which is encouraging for extending the existing 3GPP models to the wider frequency range. Further work will be carried out to complete these models, but this paper presents the first steps for an initial basis for the model development.
△ Less
Submitted 13 March, 2016;
originally announced March 2016.
-
5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments
Authors:
Katsuyuki Haneda,
Lei Tian,
Yi Zheng,
Henrik Asplund,
Jian Li,
Yi Wang,
David Steer,
Clara Li,
Tommaso Balercia,
Sunguk Lee,
YoungSuk Kim,
Amitava Ghosh,
Timothy Thomas,
Takehiro Nakamura,
Yuichi Kakishima,
Tetsuro Imai,
Haralabos Papadopoulas,
Theodore S. Rappaport,
George R. MacCartney Jr.,
Mathew K. Samimi,
Shu Sun,
Ozge Koymen,
Sooyoung Hur,
Jeongho Park,
Charlie Zhang
, et al. (4 additional authors not shown)
Abstract:
For the development of new 5G systems to operate in bands up to 100 GHz, there is a need for accurate radio propagation models at these bands that currently are not addressed by existing channel models developed for bands below 6 GHz. This document presents a preliminary overview of 5G channel models for bands up to 100 GHz. These have been derived based on extensive measurement and ray tracing re…
▽ More
For the development of new 5G systems to operate in bands up to 100 GHz, there is a need for accurate radio propagation models at these bands that currently are not addressed by existing channel models developed for bands below 6 GHz. This document presents a preliminary overview of 5G channel models for bands up to 100 GHz. These have been derived based on extensive measurement and ray tracing results across a multitude of frequencies from 6 GHz to 100 GHz, and this document describes an initial 3D channel model which includes: 1) typical deployment scenarios for urban microcells (UMi) and urban macrocells (UMa), and 2) a baseline model for incorporating path loss, shadow fading, line of sight probability, penetration and blockage models for the typical scenarios. Various processing methodologies such as clustering and antenna decoupling algorithms are also presented.
△ Less
Submitted 25 February, 2016; v1 submitted 24 February, 2016;
originally announced February 2016.
-
A Prediction Study of Path Loss Models from 2-73.5 GHz in an Urban-Macro Environment
Authors:
Timothy A. Thomas,
Marcin Rybakowski,
Shu Sun,
Theodore S. Rappaport,
Huan Nguyen,
Istvan Z. Kovacs,
Ignacio Rodriguez
Abstract:
It is becoming clear that 5G wireless systems will encompass frequencies from around 500 MHz all the way to around 100 GHz. To adequately assess the performance of 5G systems in these different bands, path loss (PL) models will need to be developed across this wide frequency range. The PL models can roughly be broken into two categories, ones that have some anchor in physics, and ones that curve-m…
▽ More
It is becoming clear that 5G wireless systems will encompass frequencies from around 500 MHz all the way to around 100 GHz. To adequately assess the performance of 5G systems in these different bands, path loss (PL) models will need to be developed across this wide frequency range. The PL models can roughly be broken into two categories, ones that have some anchor in physics, and ones that curve-match only over the data set without any physical anchor. In this paper we use both real-world measurements from 2 to 28 GHz and ray-tracing studies from 2 to 73.5 GHz, both in an urban-macro environment, to assess the prediction performance of the two PL modeling techniques. In other words, we look at how the two different PL modeling techniques perform when the PL model is applied to a prediction set which is different in distance, frequency, or environment from a measurement set where the parameters of the respective models are determined. We show that a PL model with a physical anchor point can be a better predictor of PL performance in the prediction sets while also providing a parameterization which is more stable over a substantial number of different measurement sets.
△ Less
Submitted 23 February, 2016; v1 submitted 4 December, 2015;
originally announced December 2015.
-
Path Loss, Shadow Fading, and Line-Of-Sight Probability Models for 5G Urban Macro-Cellular Scenarios
Authors:
Shu Sun,
Timothy A. Thomas,
Theodore S. Rappaport,
Huan Nguyen,
Istvan Z. Kovacs,
Ignacio Rodrigue
Abstract:
This paper presents key parameters including the line-of-sight (LOS) probability, large-scale path loss, and shadow fading models for the design of future fifth generation (5G) wireless communication systems in urban macro-cellular (UMa) scenarios, using the data obtained from propagation measurements at 38 GHz in Austin, US, and at 2, 10, 18, and 28 GHz in Aalborg, Denmark. A comparison of differ…
▽ More
This paper presents key parameters including the line-of-sight (LOS) probability, large-scale path loss, and shadow fading models for the design of future fifth generation (5G) wireless communication systems in urban macro-cellular (UMa) scenarios, using the data obtained from propagation measurements at 38 GHz in Austin, US, and at 2, 10, 18, and 28 GHz in Aalborg, Denmark. A comparison of different LOS probability models is performed for the Aalborg environment. Alpha-betagamma and close-in reference distance path loss models are studied in depth to show their value in channel modeling. Additionally, both single-slope and dual-slope omnidirectional path loss models are investigated to analyze and contrast their root-mean-square (RMS) errors on measured path loss values. While the results show that the dual-slope large-scale path loss model can slightly reduce RMS errors compared to its singleslope counterpart in non-line-of-sight (NLOS) conditions, the improvement is not significant enough to warrant adopting the dual-slope path loss model. Furthermore, the shadow fading magnitude versus distance is explored, showing a slight increasing trend in LOS and a decreasing trend in NLOS based on the Aalborg data, but more measurements are necessary to gain a better knowledge of the UMa channels at centimeter- and millimeter-wave frequency bands.
△ Less
Submitted 24 November, 2015; v1 submitted 23 November, 2015;
originally announced November 2015.
-
Millimeter-Wave Distance-Dependent Large-Scale Propagation Measurements and Path Loss Models for Outdoor and Indoor 5G Systems
Authors:
Shu Sun,
George R. MacCartney Jr.,
Theodore S. Rappaport
Abstract:
This paper presents millimeter-wave propagation measurements for urban micro-cellular and indoor office scenarios at 28 GHz and 73 GHz, and investigates the corresponding path loss using five types of path loss models, the singlefrequency floating-intercept (FI) model, single-frequency closein (CI) free space reference distance model, multi-frequency alpha-beta-gamma (ABG) model, multi-frequency C…
▽ More
This paper presents millimeter-wave propagation measurements for urban micro-cellular and indoor office scenarios at 28 GHz and 73 GHz, and investigates the corresponding path loss using five types of path loss models, the singlefrequency floating-intercept (FI) model, single-frequency closein (CI) free space reference distance model, multi-frequency alpha-beta-gamma (ABG) model, multi-frequency CI model, and multi-frequency CI model with a frequency-weighted path loss exponent (CIF), in both line-of-sight and non-line-of-sight environments. Results show that the CI and CIF models provide good estimation and exhibit stable behavior over frequencies and distances, with a solid physical basis and less computational complexity when compared with the FI and ABG models. Furthermore, path loss in outdoor scenarios shows little dependence on frequency beyond the first meter of free space propagation, whereas path loss tends to increase with frequency in addition to the increased free space path loss in indoor environments. Therefore, the CI model is suitable for outdoor environments over multiple frequencies, while the CIF model is more appropriate for indoor modeling. This work shows that both the CI and CIF models use fewer parameters and offer more convenient closedform expressions suitable for analysis, without compromising model accuracy when compared to current 3GPP and WINNER path loss models.
△ Less
Submitted 23 February, 2016; v1 submitted 23 November, 2015;
originally announced November 2015.
-
Propagation Path Loss Models for 5G Urban Micro- and Macro-Cellular Scenarios
Authors:
Shu Sun,
Theodore S. Rappaport,
Sundeep Rangan,
Timothy A. Thomas,
Amitava Ghosh,
Istvan Z. Kovacs,
Ignacio Rodriguez,
Ozge Koymen,
Andrzej Partyka,
Jan Jarvelainen
Abstract:
This paper presents and compares two candidate large-scale propagation path loss models, the alpha-beta-gamma (ABG) model and the close-in (CI) free space reference distance model, for the design of fifth generation (5G) wireless communication systems in urban micro- and macro-cellular scenarios. Comparisons are made using the data obtained from 20 propagation measurement campaigns or ray-tracing…
▽ More
This paper presents and compares two candidate large-scale propagation path loss models, the alpha-beta-gamma (ABG) model and the close-in (CI) free space reference distance model, for the design of fifth generation (5G) wireless communication systems in urban micro- and macro-cellular scenarios. Comparisons are made using the data obtained from 20 propagation measurement campaigns or ray-tracing studies from 2 GHz to 73.5 GHz over distances ranging from 5 m to 1429 m. The results show that the one-parameter CI model has a very similar goodness of fit (i.e., the shadow fading standard deviation) in both line-of-sight and non-line-of-sight environments, while offering substantial simplicity and more stable behavior across frequencies and distances, as compared to the three-parameter ABG model. Additionally, the CI model needs only one very subtle and simple modification to the existing 3GPP floating-intercept path loss model (replacing a constant with a close-in free space reference value) in order to provide greater simulation accuracy, more simplicity, better repeatability across experiments, and higher stability across a vast range of frequencies.
△ Less
Submitted 23 February, 2016; v1 submitted 23 November, 2015;
originally announced November 2015.
-
Synthesizing Omnidirectional Antenna Patterns, Received Power and Path Loss from Directional Antennas for 5G Millimeter-Wave Communications
Authors:
Shu Sun,
George R. MacCartney Jr.,
Mathew K. Samimi,
Theodore S. Rappaport
Abstract:
Omnidirectional path loss models are vital for radiosystem design in wireless communication systems, as they allow engineers to perform network simulations for systems with arbitrary antenna patterns. At millimeter-wave frequencies, channel measurements are frequently conducted using steerable highgain directional antennas at both the transmitter and receiver to make up for the significant increas…
▽ More
Omnidirectional path loss models are vital for radiosystem design in wireless communication systems, as they allow engineers to perform network simulations for systems with arbitrary antenna patterns. At millimeter-wave frequencies, channel measurements are frequently conducted using steerable highgain directional antennas at both the transmitter and receiver to make up for the significant increase in free space path loss at these frequencies compared to traditional cellular systems that operate at lower frequencies. The omnidirectional antenna pattern, and resulting omnidirectional received power must therefore be synthesized from many unique pointing angles, where the transmit and receive antennas are rotated over many different azimuth and elevation planes. In this paper, the equivalent omnidirectional antenna pattern and omnidirectional received power are synthesized by summing the received powers from all measured unique pointing angles obtained at antenna halfpower beamwidth step increments in the azimuth and elevation planes, and this method is validated by demonstrating that the synthesized omnidirectional received power and path loss are independent of antenna beamwidth, through theoretical analyses and millimeter-wave propagation measurements using antennas with different beamwidths. The method in this paper is shown to provide accurate results while enhancing the measurement range substantially through the use of directional antennas.
△ Less
Submitted 1 December, 2015; v1 submitted 23 November, 2015;
originally announced November 2015.
-
Indoor Office Plan Environment and Layout-Based MmWave Path Loss Models for 28 GHz and 73 GHz
Authors:
George R. MacCartney Jr.,
Sija Deng,
Theodore S. Rappaport
Abstract:
This paper presents large-scale path loss models based on extensive ultra-wideband millimeter-wave propagation measurements performed at 28 GHz and 73 GHz in three typical indoor office layouts -- namely: corridor, open-plan, and closed-plan. A previous study combined all indoor layouts together, while this study separates them for site-specific indoor large-scale path loss model analysis. Measure…
▽ More
This paper presents large-scale path loss models based on extensive ultra-wideband millimeter-wave propagation measurements performed at 28 GHz and 73 GHz in three typical indoor office layouts -- namely: corridor, open-plan, and closed-plan. A previous study combined all indoor layouts together, while this study separates them for site-specific indoor large-scale path loss model analysis. Measurements were conducted using a 400 megachips-per-second broadband sliding correlator channel sounder with 800 MHz first null-to-null RF bandwidth for 48 transmitter-receiver location combinations with distances ranging 3.9 m to 45.9 m for both co- and cross-polarized antenna configurations in line-of-sight and non-line-of-sight environments. Omnidirectional path loss values were synthesized from over 14,000 directional power delay profiles and were used to generate single-frequency and multi-frequency path loss models for combined, co-, and cross-polarized antennas. Large-scale path loss models that include a cross-polarization discrimination factor are provided for cross-polarized antenna measurements. The results show the value of using the close-in free space reference distance single and multi-frequency path loss models, as they offer simplicity (less parameters) in path loss calculation and prediction, without sacrificing accuracy. Moreover, the current 3GPP floating-intercept path loss model only requires a simple and subtle modification to convert to the close-in free space reference distance models.
△ Less
Submitted 22 February, 2016; v1 submitted 22 November, 2015;
originally announced November 2015.
-
Local Multipath Model Parameters for Generating 5G Millimeter-Wave 3GPP-like Channel Impulse Response
Authors:
Mathew K. Samimi,
Theodore S. Rappaport
Abstract:
This paper presents 28 GHz and 73 GHz empirically-derived large-scale and small-scale channel model parameters that characterize average temporal and angular properties of multipaths. Omnidirectional azimuth scans at both the transmitter and receiver used high gain directional antennas, from which global 3GPP modeling parameters for the mean global azimuth and zenith spreads of arrival were found…
▽ More
This paper presents 28 GHz and 73 GHz empirically-derived large-scale and small-scale channel model parameters that characterize average temporal and angular properties of multipaths. Omnidirectional azimuth scans at both the transmitter and receiver used high gain directional antennas, from which global 3GPP modeling parameters for the mean global azimuth and zenith spreads of arrival were found to be 22 degrees and 6.2 degrees at 28 GHz, and 37.1 degrees and 3.8 degrees at 73 GHz, respectively, in non-line of sight (NLOS). Small-scale spatial measurements at 28 GHz reveal a mean cross-polar ratio for individual multipath components of 29.7 dB and 16.7 dB in line of sight and NLOS, respectively. Small-scale parameters extracted using the KPowerMeans algorithm yielded on average 5.3 and 4.6 clusters at 28 GHz and 73 GHz, respectively, in NLOS. The time cluster - spatial lobe (TCSL) modeling approach uses an alternative physically-based binning procedure and recreates 3GPP model parameters to generate channel impulse responses, as well as new parameters like the RMS lobe angular spreads useful in quantifying millimeter-wave directionality. The TCSL algorithm faithfully reproduces first- and second-order statistics of measured millimeter-wave channels.
△ Less
Submitted 15 February, 2016; v1 submitted 21 November, 2015;
originally announced November 2015.
-
MIMO Channel Modeling and Capacity Analysis for 5G Millimeter-Wave Wireless Systems
Authors:
Mathew K. Samimi,
Shu Sun,
Theodore S. Rappaport
Abstract:
This paper presents a 3-D statistical channel model of the impulse response with small-scale spatially correlated random coefficients for multi-element transmitter and receiver antenna arrays, derived using the physically-based time cluster - spatial lobe (TCSL) clustering scheme. The small-scale properties of multipath amplitudes are modeled based on 28 GHz outdoor millimeter-wave small-scale loc…
▽ More
This paper presents a 3-D statistical channel model of the impulse response with small-scale spatially correlated random coefficients for multi-element transmitter and receiver antenna arrays, derived using the physically-based time cluster - spatial lobe (TCSL) clustering scheme. The small-scale properties of multipath amplitudes are modeled based on 28 GHz outdoor millimeter-wave small-scale local area channel measurements. The wideband channel capacity is evaluated by considering measurement-based Rician-distributed voltage amplitudes, and the spatial autocorrelation of multipath amplitudes for each pair of transmitter and receiver antenna elements. Results indicate that Rician channels may exhibit equal or possibly greater capacity compared to Rayleigh channels, depending on the number of antennas.
△ Less
Submitted 27 January, 2016; v1 submitted 21 November, 2015;
originally announced November 2015.
-
28 GHz Millimeter-Wave Ultrawideband Small-Scale Fading Models in Wireless Channels
Authors:
Mathew K. Samimi,
George R. MacCartney, Jr.,
Shu Sun,
Theodore S. Rappaport
Abstract:
This paper presents small-scale fading measurements for 28 GHz outdoor millimeter-wave ultrawideband channels using directional horn antennas at the transmitter and receiver. Power delay profiles were measured at half-wavelength spatial increments over a local area (33 wavelengths) on a linear track in two orthogonal receiver directions in a typical base-to-mobile scenario with fixed transmitter a…
▽ More
This paper presents small-scale fading measurements for 28 GHz outdoor millimeter-wave ultrawideband channels using directional horn antennas at the transmitter and receiver. Power delay profiles were measured at half-wavelength spatial increments over a local area (33 wavelengths) on a linear track in two orthogonal receiver directions in a typical base-to-mobile scenario with fixed transmitter and receiver antenna beam pointing directions. The voltage path amplitudes are shown to follow a Rician distribution, with K-factor ranging from 9 - 15 dB and 5 - 8 dB in line of sight (LOS) and non-line of sight (NLOS) for a vertical-to-vertical co-polarized antenna scenario, respectively, and from 3 - 7 dB in both LOS and NLOS vertical-to-horizontal cross-polarized antenna scenario. The average spatial autocorrelation functions of individual multipath components reveal that signal amplitudes reach a correlation of 0 after 2 and 5 wavelengths in LOS and NLOS co-polarized V-V antenna scenarios. The models provided are useful for recreating path gain statistics of millimeter-wave wideband channel impulse responses over local areas, for the study of multi-element antenna simulations and channel estimation algorithms.
△ Less
Submitted 22 February, 2016; v1 submitted 21 November, 2015;
originally announced November 2015.
-
Statistical Channel Model with Multi-Frequency and Arbitrary Antenna Beamwidth for Millimeter-Wave Outdoor Communications
Authors:
Mathew K. Samimi,
Theodore S. Rappaport
Abstract:
This paper presents a 3-dimensional millimeter-wave statistical channel impulse response model from 28 GHz and 73 GHz ultrawideband propagation measurements. An accurate 3GPP-like channel model that supports arbitrary carrier frequency, RF bandwidth, and antenna beamwidth (for both omnidirectional and arbitrary directional antennas), is provided. Time cluster and spatial lobe model parameters are…
▽ More
This paper presents a 3-dimensional millimeter-wave statistical channel impulse response model from 28 GHz and 73 GHz ultrawideband propagation measurements. An accurate 3GPP-like channel model that supports arbitrary carrier frequency, RF bandwidth, and antenna beamwidth (for both omnidirectional and arbitrary directional antennas), is provided. Time cluster and spatial lobe model parameters are extracted from empirical distributions from field measurements. A step-by-step modeling procedure for generating channel coefficients is shown to agree with statistics from the field measurements, thus confirming that the statistical channel model faithfully recreates spatial and temporal channel impulse responses for use in millimeter-wave 5G air interface designs.
△ Less
Submitted 21 November, 2015; v1 submitted 11 October, 2015;
originally announced October 2015.
-
73 GHz Wideband Millimeter-Wave Foliage and Ground Reflection Measurements and Models
Authors:
Theodore S. Rappaport,
Sijia Deng
Abstract:
This paper presents 73 GHz wideband outdoor foliage and ground reflection measurements. Propagation measurements were made with a 400 Megachip-per-second sliding correlator channel sounder, with rotatable 27 dBi (7 degrees half- power beamwidth) horn antennas at both the transmitter and receiver, to study foliage-induced scattering and de-polarization effects, to assist in develo** future wirele…
▽ More
This paper presents 73 GHz wideband outdoor foliage and ground reflection measurements. Propagation measurements were made with a 400 Megachip-per-second sliding correlator channel sounder, with rotatable 27 dBi (7 degrees half- power beamwidth) horn antennas at both the transmitter and receiver, to study foliage-induced scattering and de-polarization effects, to assist in develo** future wireless systems that will use adaptive array antennas. Signal attenuation through foliage was measured to be 0.4 dB/m for both co- and cross-polarized antenna configurations. Measured ground reflection coefficients for dirt and gravel ranged from 0.02 to 0.34, for incident angles ranging from 60 degrees to 81 degrees (with respect to the normal incidence of the surface). These data are useful for link budget design and site-specific (ray-tracing) models for future millimeter-wave communication systems.
△ Less
Submitted 1 September, 2015;
originally announced September 2015.
-
28 GHz and 73 GHz Millimeter-Wave Indoor Propagation Measurements and Path Loss Models
Authors:
Sijia Deng,
Mathew K. Samimi,
Theodore S. Rappaport
Abstract:
This paper presents 28 GHz and 73 GHz millimeter- wave propagation measurements performed in a typical office environment using a 400 Megachip-per-second broadband sliding correlator channel sounder and highly directional steerable 15 dBi (30 degrees beamwidth) and 20 dBi (15 degrees beamwidth) horn antennas. Power delay profiles were acquired for 48 transmitter-receiver location combinations over…
▽ More
This paper presents 28 GHz and 73 GHz millimeter- wave propagation measurements performed in a typical office environment using a 400 Megachip-per-second broadband sliding correlator channel sounder and highly directional steerable 15 dBi (30 degrees beamwidth) and 20 dBi (15 degrees beamwidth) horn antennas. Power delay profiles were acquired for 48 transmitter-receiver location combinations over distances ranging from 3.9 m to 45.9 m with maximum transmit powers of 24 dBm and 12.3 dBm at 28 GHz and 73 GHz, respectively. Directional and omnidirectional path loss models and RMS delay spread statistics are presented for line-of-sight and non-line-of-sight environments for both co- and cross-polarized antenna configurations. The LOS omnidirectional path loss exponents were 1.1 and 1.3 at 28 GHz and 73 GHz, and 2.7 and 3.2 in NLOS at 28 GHz and 73 GHz, respectively, for vertically-polarized antennas. The mean directional RMS delay spreads were 18.4 ns and 13.3 ns, with maximum values of 193 ns and 288 ns at 28 GHz and 73 GHz, respectively.
△ Less
Submitted 1 September, 2015;
originally announced September 2015.
-
Probabilistic Omnidirectional Path Loss Models for Millimeter-Wave Outdoor Communications
Authors:
Mathew K. Samimi,
Theodore S. Rappaport,
George R. MacCartney Jr
Abstract:
This letter presents a probabilistic omnidirectional millimeter-wave path loss model based on real-world 28 GHz and 73 GHz measurements collected in New York City. The probabilistic path loss approach uses a free space line-of-sight propagation model, and for non-line-of-sight conditions uses either a close-in free space reference distance path loss model or a floating-intercept path loss model. T…
▽ More
This letter presents a probabilistic omnidirectional millimeter-wave path loss model based on real-world 28 GHz and 73 GHz measurements collected in New York City. The probabilistic path loss approach uses a free space line-of-sight propagation model, and for non-line-of-sight conditions uses either a close-in free space reference distance path loss model or a floating-intercept path loss model. The probabilistic model employs a weighting function that specifies the line-of-sight probability for a given transmitter-receiver separation distance. Results show that the probabilistic path loss model offers virtually identical results whether one uses a non-line-of-sight close-in free space reference distance path loss model, with a reference distance of 1 meter, or a floating-intercept path loss model. This letter also shows that site-specific environmental information may be used to yield the probabilistic weighting function for choosing between line-of-sight and non-line-of-sight conditions.
△ Less
Submitted 22 June, 2015; v1 submitted 25 March, 2015;
originally announced March 2015.
-
The Human Body and Millimeter-Wave Wireless Communication Systems: Interactions and Implications
Authors:
Ting Wu,
Theodore S. Rappaport,
Christopher M. Collins
Abstract:
With increasing interest in millimeter wave wireless communications, investigations on interactions between the human body and millimeter wave devices are becoming important. This paper gives examples of current regulatory requirements, and provides an example for a 60 GHz transceiver. Also, the propagation characteristics of millimeter-waves in the presence of the human body are studied, and four…
▽ More
With increasing interest in millimeter wave wireless communications, investigations on interactions between the human body and millimeter wave devices are becoming important. This paper gives examples of current regulatory requirements, and provides an example for a 60 GHz transceiver. Also, the propagation characteristics of millimeter-waves in the presence of the human body are studied, and four models representing different body parts are considered to evaluate thermal effects of millimeter-wave radiation on the body. Simulation results show that about 34% to 42% of the incident power is reflected at the skin surface at 60 GHz. This paper shows that power density is not suitable to determine exposure compliance when millimeter wave devices are used very close to the body. A temperature-based technique for the evaluation of safety compliance is proposed in this paper.
△ Less
Submitted 19 August, 2015; v1 submitted 19 March, 2015;
originally announced March 2015.
-
3-D Statistical Channel Model for Millimeter-Wave Outdoor Mobile Broadband Communications
Authors:
Mathew K. Samimi,
Theodore S. Rappaport
Abstract:
This paper presents an omnidirectional spatial and temporal 3-dimensional statistical channel model for 28 GHz dense urban non-line of sight environments. The channel model is developed from 28 GHz ultrawideband propagation measurements obtained with a 400 megachips per second broadband sliding correlator channel sounder and highly directional, steerable horn antennas in New York City. A 3GPP-like…
▽ More
This paper presents an omnidirectional spatial and temporal 3-dimensional statistical channel model for 28 GHz dense urban non-line of sight environments. The channel model is developed from 28 GHz ultrawideband propagation measurements obtained with a 400 megachips per second broadband sliding correlator channel sounder and highly directional, steerable horn antennas in New York City. A 3GPP-like statistical channel model that is easy to implement in software or hardware is developed from measured power delay profiles and a synthesized method for providing absolute propagation delays recovered from 3-D ray-tracing, as well as measured angle of departure and angle of arrival power spectra. The extracted statistics are used to implement a MATLAB-based statistical simulator that generates 3-D millimeter-wave temporal and spatial channel coefficients that reproduce realistic impulse responses of measured urban channels. The methods and model presented here can be used for millimeter-wave system-wide simulations, and air interface design and capacity analyses.
△ Less
Submitted 18 March, 2015;
originally announced March 2015.
-
Exploiting Directionality for Millimeter-Wave Wireless System Improvement
Authors:
George R. MacCartney Jr.,
Mathew K. Samimi,
Theodore S. Rappaport
Abstract:
This paper presents directional and omnidirectional RMS delay spread statistics obtained from 28 GHz and 73 GHz ultrawideband propagation measurements carried out in New York City using a 400 Megachips per second broadband sliding correlator channel sounder and highly directional steerable horn antennas. The 28 GHz measurements did not systematically seek the optimum antenna pointing angles and re…
▽ More
This paper presents directional and omnidirectional RMS delay spread statistics obtained from 28 GHz and 73 GHz ultrawideband propagation measurements carried out in New York City using a 400 Megachips per second broadband sliding correlator channel sounder and highly directional steerable horn antennas. The 28 GHz measurements did not systematically seek the optimum antenna pointing angles and resulted in 33% outage for 39 T-R separation distances within 200 m. The 73 GHz measurements systematically found the best antenna pointing angles and resulted in 14.3% outage for 35 T-R separation distances within 200 m, all for mobile height receivers. Pointing the antennas to yield the strongest received power is shown to significantly reduce RMS delay spreads in line-of-sight (LOS) environments. A new term, distance extension exponent (DEE) is defined, and used to mathematically describe the increase in coverage distance that results by combining beams from angles with the strongest received power at a given location. These results suggest that employing directionality in millimeter-wave communications systems will reduce inter-symbol interference, improve link margin at cell edges, and enhance overall system performance.
△ Less
Submitted 17 March, 2015;
originally announced March 2015.
-
Low-Rank Spatial Channel Estimation for Millimeter Wave Cellular Systems
Authors:
Parisa A. Eliasi,
Sundeep Rangan,
Theodore S. Rappaport
Abstract:
The tremendous bandwidth available in the millimeter wave (mmW) frequencies between 30 and 300 GHz have made these bands an attractive candidate for next-generation cellular systems. However, reliable communication at these frequencies depends extensively on beamforming with very high-dimensional antenna arrays. Estimating the channel sufficiently accurately to perform beamforming can thus be chal…
▽ More
The tremendous bandwidth available in the millimeter wave (mmW) frequencies between 30 and 300 GHz have made these bands an attractive candidate for next-generation cellular systems. However, reliable communication at these frequencies depends extensively on beamforming with very high-dimensional antenna arrays. Estimating the channel sufficiently accurately to perform beamforming can thus be challenging both due to low coherence time and large number of antennas. Also, the measurements used for channel estimation may need to be made with analog beamforming where the receiver can "look" in only direction at a time. This work presents a novel method for estimation of the receive-side spatial covariance matrix of a channel from a sequence of power measurements made at different angular directions. The method reduces the spatial covariance estimation to a matrix completion optimization problem. To reduce the number of measurements, the optimization can incorporate the low-rank constraints in the channels that are typical in the mmW setting. The optimization is convex and fast, iterative methods are presented to solving the problem. Simulations are presented for both single and multi-path channels using channel models derived from real measurements in New York City at 28 GHz.
△ Less
Submitted 17 October, 2014;
originally announced October 2014.
-
Directional Cell Discovery in Millimeter Wave Cellular Networks
Authors:
C. Nicolas Barati,
S. Amir Hosseini,
Sundeep Rangan,
Pei Liu,
Thanasis Korakis,
Shivendra S. Panwar,
Theodore S. Rappaport
Abstract:
The acute disparity between increasing bandwidth demand and available spectrum, has brought millimeter wave (mmW) bands to the forefront of candidate solutions for the next-generation cellular networks. Highly directional transmissions are essential for cellular communication in these frequencies to compensate for high isotropic path loss. This reliance on directional beamforming, however, complic…
▽ More
The acute disparity between increasing bandwidth demand and available spectrum, has brought millimeter wave (mmW) bands to the forefront of candidate solutions for the next-generation cellular networks. Highly directional transmissions are essential for cellular communication in these frequencies to compensate for high isotropic path loss. This reliance on directional beamforming, however, complicates initial cell search since the mobile and base station must jointly search over a potentially large angular directional space to locate a suitable path to initiate communication. To address this problem, this paper proposes a directional cell discovery procedure where base stations periodically transmit synchronization signals, potentially in time-varying random directions, to scan the angular space. Detectors for these signals are derived based on a Generalized Likelihood Ratio Test (GLRT) under various signal and receiver assumptions. The detectors are then simulated under realistic design parameters and channels based on actual experimental measurements at 28~GHz in New York City. The study reveals two key findings: (i) digital beamforming can significantly outperform analog beamforming even when the digital beamforming uses very low quantization to compensate for the additional power requirements; and (ii) omni-directional transmissions of the synchronization signals from the base station generally outperforms random directional scanning.
△ Less
Submitted 21 April, 2015; v1 submitted 20 April, 2014;
originally announced April 2014.
-
Millimeter Wave Cellular Wireless Networks: Potentials and Challenges
Authors:
Sundeep Rangan,
Theodore S. Rappaport,
Elza Erkip
Abstract:
Millimeter wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multi-element antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban…
▽ More
Millimeter wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multi-element antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low power micro- or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures and carrier aggregation can be leveraged in the mmW context.
△ Less
Submitted 11 January, 2014;
originally announced January 2014.
-
Millimeter Wave Channel Modeling and Cellular Capacity Evaluation
Authors:
Mustafa Riza Akdeniz,
Yuanpeng Liu,
Mathew K. Samimi,
Shu Sun,
Sundeep Rangan,
Theodore S. Rappaport,
Elza Erkip
Abstract:
With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further…
▽ More
With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via beamforming and spatial multiplexing. This paper uses recent real-world measurements at 28 and 73 GHz in New York City to derive detailed spatial statistical models of the channels and uses these models to provide a realistic assessment of mmW micro- and picocellular networks in a dense urban deployment. Statistical models are derived for key channel parameters including the path loss, number of spatial clusters, angular dispersion and outage. It is found that, even in highly non-line-of-sight environments, strong signals can be detected 100 m to 200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing. Moreover, a system simulation based on the models predicts that mmW systems can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with no increase in cell density from current urban deployments.
△ Less
Submitted 25 April, 2014; v1 submitted 17 December, 2013;
originally announced December 2013.
-
Joint Spatial Division and Multiplexing for mm-Wave Channels
Authors:
Ansuman Adhikary,
Ebrahim Al Safadi,
Mathew Samimi,
Rui Wang,
Giuseppe Caire,
Theodore S. Rappaport,
Andreas F. Molisch
Abstract:
Massive MIMO systems are well-suited for mm-Wave communications, as large arrays can be built with reasonable form factors, and the high array gains enable reasonable coverage even for outdoor communications. One of the main obstacles for using such systems in frequency-division duplex mode, namely the high overhead for the feedback of channel state information (CSI) to the transmitter, can be mit…
▽ More
Massive MIMO systems are well-suited for mm-Wave communications, as large arrays can be built with reasonable form factors, and the high array gains enable reasonable coverage even for outdoor communications. One of the main obstacles for using such systems in frequency-division duplex mode, namely the high overhead for the feedback of channel state information (CSI) to the transmitter, can be mitigated by the recently proposed JSDM (Joint Spatial Division and Multiplexing) algorithm. In this paper we analyze the performance of this algorithm in some realistic propagation channels that take into account the partial overlap of the angular spectra from different users, as well as the sparsity of mm-Wave channels. We formulate the problem of user grou** for two different objectives, namely maximizing spatial multiplexing, and maximizing total received power, in a graph-theoretic framework. As the resulting problems are numerically difficult, we proposed (sub optimum) greedy algorithms as efficient solution methods. Numerical examples show that the different algorithms may be superior in different settings.We furthermore develop a new, "degenerate" version of JSDM that only requires average CSI at the transmitter, and thus greatly reduces the computational burden. Evaluations in propagation channels obtained from ray tracing results, as well as in measured outdoor channels show that this low-complexity version performs surprisingly well in mm-Wave channels.
△ Less
Submitted 24 May, 2014; v1 submitted 6 December, 2013;
originally announced December 2013.
-
Using Hierarchical Data Mining to Characterize Performance of Wireless System Configurations
Authors:
Alex Verstak,
Naren Ramakrishnan,
Kyung Kyoon Bae,
William H. Tranter,
Layne T. Watson,
Jian He,
Clifford A. Shaffer,
Theodore S. Rappaport
Abstract:
This paper presents a statistical framework for assessing wireless systems performance using hierarchical data mining techniques. We consider WCDMA (wideband code division multiple access) systems with two-branch STTD (space time transmit diversity) and 1/2 rate convolutional coding (forward error correction codes). Monte Carlo simulation estimates the bit error probability (BEP) of the system a…
▽ More
This paper presents a statistical framework for assessing wireless systems performance using hierarchical data mining techniques. We consider WCDMA (wideband code division multiple access) systems with two-branch STTD (space time transmit diversity) and 1/2 rate convolutional coding (forward error correction codes). Monte Carlo simulation estimates the bit error probability (BEP) of the system across a wide range of signal-to-noise ratios (SNRs). A performance database of simulation runs is collected over a targeted space of system configurations. This database is then mined to obtain regions of the configuration space that exhibit acceptable average performance. The shape of the mined regions illustrates the joint influence of configuration parameters on system performance. The role of data mining in this application is to provide explainable and statistically valid design conclusions. The research issue is to define statistically meaningful aggregation of data in a manner that permits efficient and effective data mining algorithms. We achieve a good compromise between these goals and help establish the applicability of data mining for characterizing wireless systems performance.
△ Less
Submitted 25 August, 2002;
originally announced August 2002.
-
BSML: A Binding Schema Markup Language for Data Interchange in Problem Solving Environments (PSEs)
Authors:
Alex Verstak,
Naren Ramakrishnan,
Layne T. Watson,
Jian He,
Clifford A. Shaffer,
Kyung Kyoon Bae,
**g Jiang,
William H. Tranter,
Theodore S. Rappaport
Abstract:
We describe a binding schema markup language (BSML) for describing data interchange between scientific codes. Such a facility is an important constituent of scientific problem solving environments (PSEs). BSML is designed to integrate with a PSE or application composition system that views model specification and execution as a problem of managing semistructured data. The data interchange proble…
▽ More
We describe a binding schema markup language (BSML) for describing data interchange between scientific codes. Such a facility is an important constituent of scientific problem solving environments (PSEs). BSML is designed to integrate with a PSE or application composition system that views model specification and execution as a problem of managing semistructured data. The data interchange problem is addressed by three techniques for processing semistructured data: validation, binding, and conversion. We present BSML and describe its application to a PSE for wireless communications system design.
△ Less
Submitted 18 February, 2002;
originally announced February 2002.