Showing 1–50 of 83 results for author: Rappaport, M

Scanning SQUID-on-tip microscope in a top-loading cryogen-free dilution refrigerator

Authors: Haibiao Zhou, Nadav Auerbach, Indranil Roy, Matan Bocarsly, Martin E. Huber, Barun Barick, Arnab Pariari, Markus Hücker, Zhi Shiuh Lim, A. Ariando, Alexey I. Berdyugin, Na Xin, Michael Rappaport, Yuri Myasoedov, Eli Zeldov

Abstract: The scanning superconducting quantum interference device (SQUID) fabricated on the tip of a sharp quartz pipette (SQUID-on-tip) has emerged as a versatile tool for nanoscale imaging of magnetic, thermal, and transport properties of microscopic devices of quantum materials. We present the design and performance of a scanning SQUID-on-tip microscope in a top-loading probe of a cryogen-free dilution… ▽ More The scanning superconducting quantum interference device (SQUID) fabricated on the tip of a sharp quartz pipette (SQUID-on-tip) has emerged as a versatile tool for nanoscale imaging of magnetic, thermal, and transport properties of microscopic devices of quantum materials. We present the design and performance of a scanning SQUID-on-tip microscope in a top-loading probe of a cryogen-free dilution refrigerator. The microscope is enclosed in a custom-made vacuum-tight cell mounted at the bottom of the probe and is suspended by springs to suppress vibrations caused by the pulse tube cryocooler. Two capillaries allow in-situ control of helium exchange gas pressure in the cell that is required for thermal imaging. A nanoscale heater is used to create local temperature gradients in the sample, which enables quantitative characterization of the relative vibrations between the tip and the sample. The spectrum of the vibrations shows distinct resonant peaks with maximal power density of about 27 nm/Hz$^{1/2}$ in the in-plane direction. The performance of the SQUID-on-tip microscope is demonstrated by magnetic imaging of the MnBi$_2$Te$_4$ magnetic topological insulator, magnetization and current distribution imaging in a SrRuO$_3$ ferromagnetic oxide thin film, and by thermal imaging of dissipation in graphene. △ Less

Submitted 23 April, 2023; originally announced April 2023.

Comments: Submitted to Review of Scientific Instruments

Journal ref: Rev Sci Instrum 94, 053706 (2023)

Measurement of the scintillation resolution in liquid xenon and its impact for future segmented calorimeters

Authors: C. Romo-Luque, J. M. Benlloch-Rodríguez, V. Herrero-Bosch, N. Salor-Iguiñiz, R. J. Aliaga, V. Álvarez, F. Ballester, R. Esteve, R. Gadea, J. Generowicz, A. Laing, F. Monrabal, M. Querol, M. Rappaport, J. Rodríguez, J. Rodríguez-Ponce, S. Teruel-Pardo, J. F. Toledo, R. Torres-Curado, P. Ferrario, J. J. Gómez-Cadenas

Abstract: We report on a new measurement of the energy resolution that can be attained in liquid xenon when recording only the scintillation light. Our setup is optimised to maximise light collection, and uses state-of-the-art, high-PDE, VUV-sensitive silicon photomultipliers. We find a value of 4.2% +- 0.2% FWHM at 511 keV, a result much better than previous measurements and close to the Poissonian resolut… ▽ More We report on a new measurement of the energy resolution that can be attained in liquid xenon when recording only the scintillation light. Our setup is optimised to maximise light collection, and uses state-of-the-art, high-PDE, VUV-sensitive silicon photomultipliers. We find a value of 4.2% +- 0.2% FWHM at 511 keV, a result much better than previous measurements and close to the Poissonian resolution that we expect in our setup (5.4% +- 0.8% FWHM at 511 keV). Our results are compatible with a null value of the intrinsic energy resolution in liquid xenon, with an upper bound of 0.4% FWHM at 95% CL at 511 keV, to be compared with 3--4% FWHM in the same region found by theoretical estimations which have been standing for the last twenty years. Our work opens new possibilities for apparatus based on liquid xenon and using scintillation only. In particular it suggests that modular scintillation detectors using liquid xenon can be very competitive as building blocks in segmented calorimeters, with applications to nuclear and particle physics as well as Positron Emission Tomography technology. △ Less

Submitted 26 January, 2023; v1 submitted 14 October, 2022; originally announced October 2022.

SOXS AIT: a paradigm for system engineering of a medium class telescope instrument

Authors: Riccardo Claudi, Kalyan Radhakrishnan, Federico Battaini, Sergio Campana, Pietro Schipani, Matteo Aliverti, Jose Antonio Araiza-Duran, Andrea Baruffolo, Sagi Ben-Ami, Anna Brucalassi, Giulio Capasso, Mirko Colapietro, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Rosario Di Benedetto, Sergio D'Orsi, Matteo Genoni, Ofir Hershko, Hanindyo Kuncarayakti, Marco Landoni, Matteo Munari, Giuliano Pignata, Michael Rappaport, Davide Ricci , et al. (18 additional authors not shown)

Abstract: SOXS (SOn of X-Shooter) is a high-efficiency spectrograph with a mean Resolution-Slit product of 3500 over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph and the Acquisition Camera) connected by the Common Path system to the NTT, and the Calibration Unit. We present an… ▽ More SOXS (SOn of X-Shooter) is a high-efficiency spectrograph with a mean Resolution-Slit product of 3500 over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph and the Acquisition Camera) connected by the Common Path system to the NTT, and the Calibration Unit. We present an overview of the flow from the scientific to the technical requirements, and the realization of the sub-systems. Further, we give an overview of the methodologies used for planning and managing the assembly of the sub-systems, their integration and tests before the acceptance of the instrument in Europe (PAE) along with the plan for the integration of SOXS to the NTT. SOXS could be used as an example for the system engineering of an instrument of moderate complexity, with a large geographic spread of the team. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: 12 pages, 4 Figures, SPIE: Astronomical Telescope + Instrumentation, Montreal 2022. arXiv admin note: text overlap with arXiv:1812.07401

The vacuum and cryogenics system of the SOXS spectrograph

Authors: S. Scuderi, G. Bellassai, R. Di Benedetto, E. Martinetti, A. Micciché, G. Nicotra, G. Occhipinti, C. Sciré, M. Aliverti, M. Genoni, F. Vitali, S. Campana, R. Claudi, P. Schipani, A. Baruffolo, S. Ben-Ami, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Landoni, M. Munari, G. Pignata , et al. (27 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a single object spectrograph built by an international consortium for the ESO NTT telescope. SOXS is based on the heritage of the X-Shooter at the ESO-VLT with two arms (UV-VIS and NIR) working in parallel, with a Resolution-Slit product of about 4500, capable of simultaneously observing over the entire band the complete spectral range from the U- to the H-band. SOXS wil… ▽ More SOXS (Son Of X-Shooter) is a single object spectrograph built by an international consortium for the ESO NTT telescope. SOXS is based on the heritage of the X-Shooter at the ESO-VLT with two arms (UV-VIS and NIR) working in parallel, with a Resolution-Slit product of about 4500, capable of simultaneously observing over the entire band the complete spectral range from the U- to the H-band. SOXS will carry out rapid and long-term Target of Opportunity requests on a variety of astronomical objects. The SOXS vacuum and cryogenic control system has been designed to evacuate, cool down and maintain the UV-VIS detector and the entire NIR spectrograph to their operating temperatures. The design chosen allows the two arms to be operated independently. This paper describes the final design of the cryo-vacuum control system, its functionalities and the tests performed in the integration laboratories. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: 12 pages, 6 figures, SPIE proceedings of the conference Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV

Progress on the SOXS NIR Spectrograph AIT

Authors: Fabrizio Vitali, Matteo Aliverti, Francesco D'Alessio, Matteo Genoni, Salvatore Scuderi, Matteo Munari, Luca Oggioni, Andrea Scaudo, Giorgio Pariani, Giancarlo Bellassai, Rosario Di Benedetto, Eugenio Martinetti, Antonio Micciche', Gaetano Nicotra, Giovanni Occhipinti, Sergio Campana, Pietro Schipani, Riccardo Claudi, Giulio Capasso, Davide Ricci, Marco Riva, Ricardo Zanmar Sanchez, Jose' Antonio Araiza-Duran, Iair Arcavi, Andrea Baruffolo , et al. (28 additional authors not shown)

Abstract: The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory, ranging from 350 to 2000 nm. In this paper, we present the progress in the AIT phase of the Near InfraRed (NIR) arm. We describe the different AIT phases of the cryo, vacuum, opto-mechanics and detector subsystems, that finally c… ▽ More The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory, ranging from 350 to 2000 nm. In this paper, we present the progress in the AIT phase of the Near InfraRed (NIR) arm. We describe the different AIT phases of the cryo, vacuum, opto-mechanics and detector subsystems, that finally converged at the INAF-OAB premises in Merate (Italy), where the NIR spectrograph is currently being assembled and tested, before the final assembly on SOXS. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: 6 pages, 8 Figures, SPIE: Astronomical Telescope + Instrumentation, Montreal 2022

From Assembly to the Complete Integration and Verification of the SOXS Common Path

Authors: Kalyan Kumar Radhakrishnan Santhakumari, Federico Battaini, Riccardo Claudi, Alessandra Slemer, F. Biondi, M. Munari, R. Z. Sanchez, M. Aliverti, L. Oggioni, M. Colapietro, D. Ricci, L. Lessio, M. Dima, L. Marafatto, J. Farinato, S. Campana, P. Schipani, S. DOrsi, B. Salasnich, A. Baruffolo, S. Ben Ami, G. Capasso, R. Cosentino, F. D Alessio, P. DAvanzo , et al. (28 additional authors not shown)

Abstract: The Son Of X-Shooter (SOXS) is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R close to 4500 for a 1 slit. SOXS also has imaging capabilities in the visible wavelength regime. It is designed and optimized to observe all kinds of transients and variable sources. The final destination of SOXS is… ▽ More The Son Of X-Shooter (SOXS) is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R close to 4500 for a 1 slit. SOXS also has imaging capabilities in the visible wavelength regime. It is designed and optimized to observe all kinds of transients and variable sources. The final destination of SOXS is the Nasmyth platform of the ESO NTT at La Silla, Chile. The SOXS consortium has a relatively large geographic spread, and therefore the Assembly Integration and Verification (AIV) of this medium-class instrument follows a modular approach. Each of the five main sub-systems of SOXS, namely the Common Path, the Calibration Unit, the Acquisition Camera, the UV-VIS Spectrograph, and the NIR Spectrograph, are undergoing (or undergone) internal alignment and testing in the respective consortium institutes. INAF-Osservatorio Astronomico di Padova delivers the Common Path sub-system, the backbone of the entire instrument. We report the Common Path internal alignment starting from the assembly of the individual components to the final testing of the optical quality, and the efficiency of the complete sub-system. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: 8 pages, 8 figures, SPIE conference proceeding

The Son-Of-X-shooter (SOXS) Data-Reduction Pipeline

Authors: David R. Young, Marco Landoni, Stephen J. Smartt, Sergio Campana, Paolo D'Avanzo, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Sagi Ben-Ami, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Ofir Hershko, Hanindyo Kuncarayakti, Matteo Munari, Giuliano Pignata, Kalyan Radhakrishnan, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, Jani Achrén, José Antonio Araiza-Duran, Iair Arcavi, Federico Battaini , et al. (21 additional authors not shown)

Abstract: The Son-Of-XShooter (SOXS) is a single object spectrograph (UV-VIS & NIR) and acquisition camera scheduled to be mounted on the ESO 3.58-m New Technology Telescope at the La Silla Observatory. Although the underlying data reduction processes to convert raw detector data to fully-reduced science ready data are complex and multi-stepped, we have designed the SOXS Data Reduction pipeline with the cor… ▽ More The Son-Of-XShooter (SOXS) is a single object spectrograph (UV-VIS & NIR) and acquisition camera scheduled to be mounted on the ESO 3.58-m New Technology Telescope at the La Silla Observatory. Although the underlying data reduction processes to convert raw detector data to fully-reduced science ready data are complex and multi-stepped, we have designed the SOXS Data Reduction pipeline with the core aims of providing end-users with a simple-to-use, well-documented command-line interface while also allowing the pipeline to be run in a fully automated state; streaming reduced data into the ESO Science Archive Facility without need for human intervention. To keep up with the stream of data coming from the instrument, there is the requirement to optimise the software to reduce each observation block of data well within the typical observation exposure time. The pipeline is written in Python 3 and has been built with an agile development philosophy that includes CI and adaptive planning. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: 10 pages, 7 figures, published in SPIE proceedings volume 12189. arXiv admin note: substantial text overlap with arXiv:2012.12678

Journal ref: Proceedings Volume 12189, Software and Cyberinfrastructure for Astronomy VII; 121891I (2022)

Progress on the SOXS transients chaser for the ESO-NTT

Authors: P. Schipani, S. Campana, R. Claudi, M. Aliverti, A. Baruffolo, S. Ben-Ami, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Landoni, M. Munari, G. Pignata, K. Radhakrishnan, A. Rubin, S. Scuderi, F. Vitali, D. Young, J. Achrén, J. A. Araiza-Durán, I. Arcavi, F. Battaini, A. Brucalassi , et al. (31 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a single object spectrograph offering a simultaneous spectral coverage from U- to H-band, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory. It is designed to observe all kind of transients and variable sources discovered by different surveys with a highly flexible schedule maintained by the consortium, based on… ▽ More SOXS (Son Of X-Shooter) is a single object spectrograph offering a simultaneous spectral coverage from U- to H-band, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory. It is designed to observe all kind of transients and variable sources discovered by different surveys with a highly flexible schedule maintained by the consortium, based on the Target of Opportunity concept. SOXS is going to be a fundamental spectroscopic partner for any kind of imaging survey, becoming one of the premier transient follow-up instruments in the Southern hemisphere. This paper gives an updated status of the project, when the instrument is in the advanced phase of integration and testing in Europe, prior to the activities in Chile. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: Proc. SPIE 12184, Ground-based and Airborne Instrumentation for Astronomy IX, 121840O (2022)

Progress on the simulation tools for the SOXS spectrograph: Exposure time calculator and End-to-End simulator

Authors: M. Genoni, A. Scaudo, G. Li Causi, L. Cabona, M. Landoni, S. Campana, P. Schipani, R. Claudi, M. Aliverti, A. Baruffolo, S. Ben-Ami, F. Biondi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Munari, G. Pignata, A. Rubin, S. Scuderi, F. Vitali, D. Young, J. Achren , et al. (24 additional authors not shown)

Abstract: We present the progresses of the simulation tools, the Exposure Time Calculator (ETC) and End-to-End simulator (E2E), for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58-meter telescope. The SOXS will be a single object spectroscopic facility, made by a two-arms high-efficiency spectrograph, able to cover the spectral range 350-2000 nanometer with a mean resolving power R$\approx$4500.… ▽ More We present the progresses of the simulation tools, the Exposure Time Calculator (ETC) and End-to-End simulator (E2E), for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58-meter telescope. The SOXS will be a single object spectroscopic facility, made by a two-arms high-efficiency spectrograph, able to cover the spectral range 350-2000 nanometer with a mean resolving power R$\approx$4500. While the purpose of the ETC is the estimate, to the best possible accuracy, of the Signal-to-Noise ratio (SNR), the E2E model allows us to simulate the propagation of photons, starting from the scientific target of interest, up to the detectors. We detail the ETC and E2E architectures, computational models and functionalities. The interface of the E2E with external simulation modules and with the pipeline are described, too. Synthetic spectral formats, related to different seeing and observing conditions, and calibration frames to be ingested by the pipeline are also presented. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: Accepted for publication in SPIE Astronomical Telescopes and Instrumentation conference proceedings (Montreal, Canada July 2022)

The Quality Check system architecture for Son-Of-X-Shooter SOXS

Authors: Marco Landoni, Laurent Marty, Dave Young, Laura Asquini, Stephen Smartt, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Federico Battaini, Andrea Baruffolo, Sagi Ben-Ami, Federico Biondi, Andrea Bianco, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Matteo Genoni, Ofir Hershko, Hanindyo Kuncarayakti, Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi , et al. (25 additional authors not shown)

Abstract: We report the implemented architecture for monitoring the health and the quality of the Son Of X-Shooter (SOXS) spectrograph for the New Technology Telescope in La Silla at the European Southern Observatory. Briefly, we report on the innovative no-SQL database approach used for storing time-series data that best suits for automatically triggering alarm, and report high-quality graphs on the dashbo… ▽ More We report the implemented architecture for monitoring the health and the quality of the Son Of X-Shooter (SOXS) spectrograph for the New Technology Telescope in La Silla at the European Southern Observatory. Briefly, we report on the innovative no-SQL database approach used for storing time-series data that best suits for automatically triggering alarm, and report high-quality graphs on the dashboard to be used by the operation support team. The system is designed to constantly and actively monitor the Key Performance Indicators (KPI) metrics, as much automatically as possible, reducing the overhead on the support and operation teams. Moreover, we will also detail about the interface designed to inject quality checks metrics from the automated SOXS Pipeline (Young et al. 2022). △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: Accepted for publication in SPIE Astronomical Telescope and Instrumentation Conference proceedings (Montreal, Canada July 2022)

SOXS mechanical integration and verification in Italy

Authors: M. Aliverti, F. Battaini, K. Radhakrishnan, M. Genoni, G. Pariani, L. Oggioni, O. Hershko, M. Colapietro, S. D'Orsi, A . Brucalassi, G. Pignata, H. Kuncarayakti, S . Campana, R. Claudi, P. Schipani, J . Achrén, J. A. Araiza Duranm, I. Arcavi, A. Baruffolo, S. Ben Ami, R . Bruch, G. Capasso, E. Cappellaro, R. Cosentino, F. D'Alessio , et al. (24 additional authors not shown)

Abstract: SOXS (SOn of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is in the final integration phase and it is planned to be installed at the NTT in La Silla by next year. It is mainly composed of five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibrati… ▽ More SOXS (SOn of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is in the final integration phase and it is planned to be installed at the NTT in La Silla by next year. It is mainly composed of five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibration) and other mechanical subsystems (Interface flange, Platform, cable corotator, and cooling system). A brief overview of the optomechanical subsystems is presented here as more details can be found in the specific proceedings while a more comprehensive discussion is dedicated to the other mechanical subsystems and the tools needed for the integration of the instrument. Moreover, the results obtained during the acceptance of the various mechanical elements are presented together with the experiments performed to validate the functionality of the subsystems. Finally, the mechanical integration procedure is shown here, along with all the modifications applied to correct the typical problems happening in this phase. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: arXiv admin note: text overlap with arXiv:2012.12693

Dynamic scheduling for SOXS instrument: environment, algorithms and development

Authors: Laura Asquini, Marco Landoni, Dave Young, Laurent Marty, Stephen Smartt, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Federico Battaini, Andrea Baruffolo, Sagi Ben Ami, Andrea Bianco, Federico Biondi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Hanindyo Kuncarayaktim Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, Jani Achren , et al. (25 additional authors not shown)

Abstract: We present development progress of the scheduler for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58 meter telescope. SOXS will be a single object spectroscopic facility, consisting of a two-arms high-efficiency spectrograph covering the spectral range 350-2000 nanometer with a mean resolving power R$\approx$4500. SOXS will be uniquely dedicated to the UV-visible and near infrared follo… ▽ More We present development progress of the scheduler for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58 meter telescope. SOXS will be a single object spectroscopic facility, consisting of a two-arms high-efficiency spectrograph covering the spectral range 350-2000 nanometer with a mean resolving power R$\approx$4500. SOXS will be uniquely dedicated to the UV-visible and near infrared follow up of astrophysical transients, with a very wide pool of targets available from the streaming services of wide-field telescopes, current and future. This instrument will serve a variety of scientific scopes in the astrophysical community, with each scope eliciting its specific requirements for observation planning, that the observing scheduler has to meet. Due to directions from the European Southern Observatory (ESO), the instrument will be operated only by La Silla staff, with no astronomer present on the mountain. This implies a new challenge for the scheduling process, requiring a fully automated algorithm that should be able to present the operator not only with and ordered list of optimal targets, but also with optimal back-ups, should anything in the observing conditions change. This imposes a fast-response capability to the scheduler, without compromising the optimization process, that ensures good quality of the observations. In this paper we present the current state of the scheduler, that is now almost complete, and of its web interface. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: Accepted for publication in SPIE Astronomical Telescope and Instrumentation Conference proceedings - Montreal (Canada) July 2022

Laboratory test of the VIS detector system of SOXS for the ESO-NTT telescope

Authors: Rosario Cosentino, Marcos Hernandez, Hector Ventura, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Sagi Ben-Ami, Federico Biondi, Giulio Capasso, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Hanindyo Kuncarayakti, Marco Landoni, Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, David Young, Jani Achren, Jose Antonio Araiza Duran, Iair Arcav , et al. (23 additional authors not shown)

Abstract: SOXS is the new spectrograph for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the final design of the visible camera cryostats, the test facilities for the CCD characterization, and the first results with the scientific detector. The UV-VIS detector system is based on a e… ▽ More SOXS is the new spectrograph for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the final design of the visible camera cryostats, the test facilities for the CCD characterization, and the first results with the scientific detector. The UV-VIS detector system is based on a e2v CCD 44-82, a custom detector head coupled with the ESO Continuous Flowing Cryostat (CFC) cooling system and the New General Detector Controller (NGC) developed by ESO. The laboratory facility is based on an optical bench equipped with a Xenon lamp, filter wheels to select the wavelength, an integrating sphere, and a calibrated diode to measure the flux. This paper outlines the visible camera cryostat, the test facilities for the CCD characterization and the first results with the scientific detector in the laboratory and after the integration to the instrument. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Monte Carlo characterization of PETALO, a full-body liquid xenon-based PET detector

Authors: J. Renner, C. Romo-Luque, R. J. Aliaga, V. Álvarez, F. Ballester, J. M. Benlloch-Rodríguez, J. V. Carrión, D. Cubero, J. Díaz, R. Esteve, R. Gadea, J. Gillam, J. Generowicz, J. L. López-Gómez, A. Martínez, F. Monrabal, M. Querol, M. Rappaport, J. Rodríguez, J. Rodríguez-Ponce, P. Solevi, S. Teruel-Pardo, J. F. Toledo, R. Torres-Curado, V. Herrero-Bosch , et al. (2 additional authors not shown)

Abstract: New detector approaches in Positron Emission Tomography imaging will play an important role in reducing costs, lowering administered radiation doses, and improving overall performance. PETALO employs liquid xenon as the active scintillating medium and UV-sensitive silicon photomultipliers for scintillation readout. The scintillation time in liquid xenon is fast enough to register time-of-flight in… ▽ More New detector approaches in Positron Emission Tomography imaging will play an important role in reducing costs, lowering administered radiation doses, and improving overall performance. PETALO employs liquid xenon as the active scintillating medium and UV-sensitive silicon photomultipliers for scintillation readout. The scintillation time in liquid xenon is fast enough to register time-of-flight information for each detected coincidence, and sufficient scintillation is produced with low enough fluctuations to obtain good energy resolution. The present simulation study examines a full-body-sized PETALO detector and evaluates its potential performance in PET image reconstruction. △ Less

Submitted 11 January, 2023; v1 submitted 27 September, 2021; originally announced September 2021.

Journal ref: JINST 17 (2022) P05044

The development status of the NIR Arm of the new SoXS instrument at the ESO/NTT telescope

Authors: F. Vitali, M. Aliverti, G. Capasso, F. D'Alessio, M. Munari, M. Riva, S. Scuderi, R. Zanmar Sanchez, S. Campana, P. Schipani, R. Claudi, A. Baruffolo, S. Ben-Ami, F. Biondi, A. Brucalassi, R. Cosentino, D. Ricci, P. D'Avanzo, H. Kuncarayakti, A. Rubin, J. Achrén, J. A. Araiza-Duran, I. Arcavi, A. Bianco, R. Bruch , et al. (23 additional authors not shown)

Abstract: We present here the development status of the NIR spectrograph of the Son Of X-Shooter (SOXS) instrument, for the ESO/NTT telescope at La Silla (Chile). SOXS is a R~4,500 mean resolution spectrograph, with a simultaneously coverage from about 0.35 to 2.00 micron. It will be mounted at the Nasmyth focus of the NTT. The two UV-VIS-NIR wavelength ranges will be covered by two separated arms. The NIR… ▽ More We present here the development status of the NIR spectrograph of the Son Of X-Shooter (SOXS) instrument, for the ESO/NTT telescope at La Silla (Chile). SOXS is a R~4,500 mean resolution spectrograph, with a simultaneously coverage from about 0.35 to 2.00 micron. It will be mounted at the Nasmyth focus of the NTT. The two UV-VIS-NIR wavelength ranges will be covered by two separated arms. The NIR spectrograph is a fully cryogenic echelle-dispersed spectrograph, working in the range 0.80-2.00 micron, equipped with a Hawaii H2RG IR array from Teledyne. The whole spectrograph will be cooled down to about 150 K (but the array at 40 K), to lower the thermal background, and equipped with a thermal filter to block any thermal radiation above 2.0 micron. In this work, we will show the advanced phase of integration of the NIR spectrograph. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: 9 pages, 13 Figures, SPIE 2020 Astronomical Telescopes + Instrumentation

Report number: 11447-90

Development status of the UV-VIS detector system of SOXS for the ESO-NTT telescope

Authors: Rosario Cosentino, Marcos Hernandez, Hector Ventura, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Sagi Ben Ami, Federico Biondi, Giulio Capasso, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Hanindyo Kuncarayakti, Marco Landoni, Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, David Young, Jani Achren, Jose Antonio Araiza Duran, Iair Arcavi , et al. (25 additional authors not shown)

Abstract: SOXS will be the new spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands by using two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the development status of the visible camera cryostat, the architecture of the acquisition system and the progress in the electronic design. The UV-VIS detector system is based on… ▽ More SOXS will be the new spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands by using two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the development status of the visible camera cryostat, the architecture of the acquisition system and the progress in the electronic design. The UV-VIS detector system is based on a CCD detector 44-82 from e2v, a custom detector head, coupled with the ESO continuous flow cryostats (CFC), a custom cooling system, based on a Programmable Logic Controller (PLC), and the New General Controller (NGC) developed by ESO. This paper outlines the development status of the system, describes the design of the different parts that make up the UV-VIS arm and is accompanied by a series of information describing the SOXS design solutions in the mechanics and in the electronics parts. The first tests of the detector system with the UV-VIS camera will be shown. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: 10 pager, 13 figures

Operational modes and efficiency of SOXS

Authors: R. Claudi, F. Biondi, N. Elias-Rosa, M. Genoni, M. Munari, K. Radhakrishnan, D. Ricci, R. Zanmar Sanchez, S. Campana, P. Schipani, M. Aliverti, A. Baruffolo, S. Ben-Ami, A. Brucalassi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Landoni, G. Pignata, A. Rubin, S. Scuderi, F. Vitali , et al. (23 additional authors not shown)

Abstract: Son of X-Shooter (SOXS) will be a high-efficiency spectrograph with a mean Resolution-Slit product of $\sim 4500$ over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph, and the Acquisition Camera) connected by the Common Path system to the NTT, and the Calibration Unit. T… ▽ More Son of X-Shooter (SOXS) will be a high-efficiency spectrograph with a mean Resolution-Slit product of $\sim 4500$ over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph, and the Acquisition Camera) connected by the Common Path system to the NTT, and the Calibration Unit. The Common Path is the backbone of the instrument and the interface to the NTT Nasmyth focus flange. The instrument project went through the Final Design Review in 2018 and is currently in Assembly Integration and test (AIT) Phase. This paper outlines the observing modes of SOXS and the efficiency of each subsystem and the laboratory test plan to evaluate it. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: 10 pages, 4 figures. 2020 SPIE Conference. arXiv admin note: text overlap with arXiv:1812.07401

Progress and tests on the Instrument Control Electronics for SOXS

Authors: M. Colapietro, G. Capasso, S. D'Orsi, P. Schipani, L. Marty, S. Savarese, I. Coretti, S. Campana, R. Claudi, M. Aliverti, A. Baruffolo, S. Ben-Ami, F. Biondi, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Landoni, M. Munari, G. Pignata, A. Rubin, S. Scuderi, F. Vitali, D. Young , et al. (24 additional authors not shown)

Abstract: The forthcoming SOXS (Son Of X-Shooter) will be a new spectroscopic facility for the ESO New Technology Telescope in La Silla, focused on transient events and able to cover both the UV-VIS and NIR bands. The instrument passed the Final Design Review in 2018 and is currently in manufacturing and integration phase. This paper is focused on the assembly and testing of the instrument control electroni… ▽ More The forthcoming SOXS (Son Of X-Shooter) will be a new spectroscopic facility for the ESO New Technology Telescope in La Silla, focused on transient events and able to cover both the UV-VIS and NIR bands. The instrument passed the Final Design Review in 2018 and is currently in manufacturing and integration phase. This paper is focused on the assembly and testing of the instrument control electronics, which will manage all the motorized functions, alarms, sensors, and electric interlocks. The electronics is hosted in two main control cabinets, divided in several subracks that are assembled to ensure easy accessibility and transportability, to simplify test, integration and maintenance. Both racks are equipped with independent power supply distribution and have their own integrated cooling systems. This paper shows the assembly strategy, reports on the development status and describes the tests performed to verify the system before the integration into the whole instrument. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: 10 pages, 12 figures, presented at SPIE

Development status of the SOXS spectrograph for the ESO-NTT telescope

Authors: P. Schipani, S. Campana, R. Claudi, M. Aliverti, A. Baruffolo, S. Ben-Ami, F. Biondi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Landoni, M. Munari, G. Pignata, A. Rubin, S. Scuderi, F. Vitali, D. Young, J. Achren, J. A. Araiza-Duran, I. Arcavi, A. Brucalassi, R. Bruch , et al. (29 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a single object spectrograph, characterized by offering a wide simultaneous spectral coverage from U- to H-band, built by an international consortium for the 3.6-m ESO New Technology Telescope at the La Silla Observatory, in the Southern part of the Chilean Atacama Desert. The consortium is focussed on a clear scientific goal: the spectrograph will observe all kind of tr… ▽ More SOXS (Son Of X-Shooter) is a single object spectrograph, characterized by offering a wide simultaneous spectral coverage from U- to H-band, built by an international consortium for the 3.6-m ESO New Technology Telescope at the La Silla Observatory, in the Southern part of the Chilean Atacama Desert. The consortium is focussed on a clear scientific goal: the spectrograph will observe all kind of transient and variable sources discovered by different surveys with a highly flexible schedule, updated daily, based on the Target of Opportunity concept. It will provide a key spectroscopic partner to any kind of imaging survey, becoming one of the premier transient follow-up instruments in the Southern hemisphere. SOXS will study a mixture of transients encompassing all distance scales and branches of astronomy, including fast alerts (such as gamma-ray bursts and gravitational waves), mid-term alerts (such as supernovae and X-ray transients), and fixed-time events (such as the close-by passage of a minor planet or exoplanets). It will also have the scope to observe active galactic nuclei and blazars, tidal disruption events, fast radio bursts, and more. Besides of the consortium programs on guaranteed time, the instrument is offered to the ESO community for any kind of astrophysical target. The project has passed the Final Design Review and is currently in manufacturing and integration phase. This paper describes the development status of the project. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: Proc SPIE Volume 11447, Ground-based and Airborne Instrumentation for Astronomy VIII, 1144709,2020

Manufacturing, integration, and mechanical verification of SOXS

Authors: M. Aliverti, L. Oggioni, M. Genoni, G. Pariani, O. Hershko, A. Brucalassi, G. Pignata, H. Kuncarayakti, R. Zanmar Sanchez, M. Munari, S. Campana, P. Schipani, R. Claudi, A. Baruffolo, S. Ben-Ami, F. Biondi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, M. Landoni, A. Rubin, S. Scuderi, F. Vitali, D. Young , et al. (24 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is planned to be installed at the NTT in La Silla and it is mainly composed by five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibration) and other mechanical subsystems (Interface flan… ▽ More SOXS (Son Of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is planned to be installed at the NTT in La Silla and it is mainly composed by five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibration) and other mechanical subsystems (Interface flange, Platform, cable corotator, and cooling). It is currently in the procurement and integration phase. In this paper we present the post-FDR modifications in the mechanical design due to the various iterations with the manufacturers and the actual procurement status. The last part describes the strategy used to keep under control the mechanical interfaces between the subsystems. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Design and development of the SOXS calibration unit

Authors: Hanindyo Kuncarayakti, Jani Achren, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Sagi Ben-Ami, Federico Biondi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Marco Landoni, Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, David Young, Jose Antonio Araiza-Duran, Iair Arcavi, Anna Brucalassi, Rachel Bruch , et al. (21 additional authors not shown)

Abstract: SOXS is a new spectrograph for the New Technology Telescope (NTT), optimized for transient and variable objects, covering a wide wavelength range from 350 to 2000 nm. SOXS is equipped with a calibration unit that will be used to remove the instrument signatures and to provide wavelength calibration to the data. The calibration unit will employ seven calibration lamps: a quartz-tungsten-halogen and… ▽ More SOXS is a new spectrograph for the New Technology Telescope (NTT), optimized for transient and variable objects, covering a wide wavelength range from 350 to 2000 nm. SOXS is equipped with a calibration unit that will be used to remove the instrument signatures and to provide wavelength calibration to the data. The calibration unit will employ seven calibration lamps: a quartz-tungsten-halogen and a deuterium lamp for the flat-field correction, a ThAr lamp and four pencil-style rare-gas lamps for the wavelength calibration. The light from the calibration lamps is injected into the spectrograph mimicking the f/11 input beam of the NTT, by using an integrating sphere and a custom doublet. The oversized illumination patch covers the length of the spectrograph slit homogeneously, with $< 1\%$ variation. The optics also supports the second mode of the unit, the star-simulator mode that emulates a point source by utilizing a pinhole mask. Switching between the direct illumination and pinhole modes is performed by a linear stage. A safety interlock switches off the main power when the lamp box cover is removed, preventing accidental UV exposure to the service personnel. All power supplies and control modules are located in an electronic rack at a distance from the telescope platform. In this presentation we describe the optical, mechanical, and electrical designs of the SOXS calibration unit, and report the status of development in which the unit is currently in the test and verification stage. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: 7 pages, 7 figures

Journal ref: SPIE Proceedings Volume 11447, Ground-based and Airborne Instrumentation for Astronomy VIII; 1144766 (2020)

SOXS End-to-End simulator: development and applications for pipeline design

Authors: M. Genoni, M. Landoni, G. Li Causi, G. Pariani, M. Aliverti, S. Campana, P. Schipani, R. Claudi, M. Munari, A. Rubin, P. D'Avanzo, M. Riva, A. Baruffolo, F. Biondi, G. Capasso, R. Cosentino, F. D'Alessio, O. Hershko, H. Kuncarayakti, G. Pignata, S. Scuderi, K. Radhakrishnan, S. Ben-Ami, F. Vitali, D. Young , et al. (22 additional authors not shown)

Abstract: We present the development of the End-to-End simulator for the SOXS instrument at the ESO-NTT 3.5-m telescope. SOXS will be a spectroscopic facility, made by two arms high efficiency spectrographs, able to cover the spectral range 350-2000 nm with resolving power R=4500. The E2E model allows to simulate the propagation of photons starting from the scientific target of interest up to the detectors.… ▽ More We present the development of the End-to-End simulator for the SOXS instrument at the ESO-NTT 3.5-m telescope. SOXS will be a spectroscopic facility, made by two arms high efficiency spectrographs, able to cover the spectral range 350-2000 nm with resolving power R=4500. The E2E model allows to simulate the propagation of photons starting from the scientific target of interest up to the detectors. The outputs of the simulator are synthetic frames, which will be mainly exploited for optimizing the pipeline development and possibly assisting for proper alignment and integration phases in laboratory and at the telescope. In this paper, we will detail the architecture of the simulator and the computational model, which are strongly characterized by modularity and flexibility. Synthetic spectral formats, related to different seeing and observing conditions, and calibration frames to be ingested by the pipeline are also presented. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Journal ref: Proc. SPIE 11450, Modeling, Systems Engineering, and Project Management for Astronomy IX, 114501B (13 December 2020)

Development status of the SOXS instrument control software

Authors: Davide Ricci, Andrea Baruffolo, Bernardo Salasnich, Marco De Pascale, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Sagi Ben-Ami, Federico Biondi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Hanindyo Kuncarayakti, Marco Landoni, Matteo Munari, Giuliano Pignata, Kalyan Radhakrishnan, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, David Young, Jani Achrén , et al. (21 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a forthcoming instrument for ESO-NTT, mainly dedicated to the spectroscopic study of transient events and is currently starting the AIT (Assembly, Integration, and Test) phase. It foresees a visible spectrograph, a near-Infrared (NIR) spectrograph, and an acquisition camera for light imaging and secondary guiding. The optimal setup and the monitoring of SOXS are carried… ▽ More SOXS (Son Of X-Shooter) is a forthcoming instrument for ESO-NTT, mainly dedicated to the spectroscopic study of transient events and is currently starting the AIT (Assembly, Integration, and Test) phase. It foresees a visible spectrograph, a near-Infrared (NIR) spectrograph, and an acquisition camera for light imaging and secondary guiding. The optimal setup and the monitoring of SOXS are carried out with a set of software-controlled motorized components and sensors. The instrument control software (INS) also manages the observation and calibration procedures, as well as maintenance and self-test operations. The architecture of INS, based on the latest release of the VLT Software (VLT2019), has been frozen; the code development is in an advanced state for what concerns supported components and observation procedures, which run in simulation. In this proceeding we present the INS current status, focusing in particular on the ongoing efforts in the support of two non-standard, "special" devices. The first special device is the piezoelectric slit exchanger for the NIR spectrograph; the second special device is the piezoelectric tip-tilt corrector used for active compensation of mechanical flexures of the instrument. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: 8 pages, 4 figures

Journal ref: Proceedings Volume 11452, Software and Cyberinfrastructure for Astronomy VI; 114522Q (2020)

Final design and development status of the acquisition and guiding system for SOXS

Authors: A. Brucalassi, G. Pignata, J. A. Araiza Duran, S. Campana, R. Claudi, P. Schipani, M. Aliverti, A. Baruffolo, S. Ben Ami, F. Biondi, G. Capasso, M. Colapietro, R. Cosentino, F. D'Alessio, P. D'Avanzo, M. Genoni, O. Hershko, H. Kuncarayakti, M. Landoni, M. Munari, K. Radhakrishnan, M. Rappaport, D. Ricci, A. Rubin, S. Scuderi , et al. (21 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) will be the new medium resolution (R~4500 for 1'' slit), high-efficiency, wide band spectrograph for the ESO NTT at La Silla, optimized for classification and follow-up of transient events. SOXS will simultaneously cover UV optical and NIR bands (0.35-2.00 micron) using two different arms and a pre-slit Common Path feeding system. The instrument will be also equipped by a C… ▽ More SOXS (Son Of X-Shooter) will be the new medium resolution (R~4500 for 1'' slit), high-efficiency, wide band spectrograph for the ESO NTT at La Silla, optimized for classification and follow-up of transient events. SOXS will simultaneously cover UV optical and NIR bands (0.35-2.00 micron) using two different arms and a pre-slit Common Path feeding system. The instrument will be also equipped by a Calibration Unit and an Acquisition Camera (AC) System. In this paper we present the final opto-mechanical design for the AC System and we describe its development status. The project is currently in manufacturing and integration phases. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: 8 pages, 8 figures, SPIE conference. arXiv admin note: text overlap with arXiv:1809.01526

Progress on the UV-VIS arm of SOXS

Authors: Adam Rubin, Sagi Ben-Ami, Ofir Hershko, Michael Rappaport, Avishay Gal-Yam, Rachel Bruch, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Federico Biondi, Giulio Capasso, Rosario Cosentino, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Hanindyo Kuncarayakti, Hanindyo Kuncarayakti, Marco Landoni, Matteo Munari, Giuliano Pignata, Giuliano Pignata, Salvatore Scuderi, Salvatore Scuderi , et al. (30 additional authors not shown)

Abstract: We present our progress on the UV-VIS arm of Son Of X-Shooter (SOXS), a new spectrograph for the NTT. Our design splits the spectral band into four sub-bands that are imaged onto a single detector. Each band uses an optimized high efficiency grating that operates in 1st order (m=1). In our previous paper we presented the concept and preliminary design. SOXS passed a Final Design Review in July 201… ▽ More We present our progress on the UV-VIS arm of Son Of X-Shooter (SOXS), a new spectrograph for the NTT. Our design splits the spectral band into four sub-bands that are imaged onto a single detector. Each band uses an optimized high efficiency grating that operates in 1st order (m=1). In our previous paper we presented the concept and preliminary design. SOXS passed a Final Design Review in July 2018 and is well into the construction phase. Here we present the final design, performances of key manufactured elements, and the progress in the assembly. Based on the as-built elements, the expected throughput of the visual arm will be >55%. This paper is accompanied by a series of contributions describing the progress made on the SOXS instrument. △ Less

Submitted 23 December, 2020; originally announced December 2020.

SOXS: Effects on optical performances due to gravity flexures, temperature variations, and subsystems alignment

Authors: Ricardo Zanmar Sanchez, Matteo Aliverti, Matteo Munari, Sergio Campana, Riccardo Claudi, Pietro Schipani, Andrea Baruffolo, Sagi Ben-Ami, Federico Biondi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Hanindyo Kuncarayakti, Marco Landoni, Giuliano Pignata, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, David Young, Jani Achrén, José Antonio Araiza-Duran, Iair Arcavi, Anna Brucalassi , et al. (21 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is the new medium resolution wide-band spectrograph to be installed at the 3.6m New Technology Telescope (NTT) in La Silla. SOXS will offer simultaneous wavelength coverage from 0.35 to 2.0 μm and will be dedicated to the study of transient and variable sources. While nominal optical performances of the system were presented in previous proceedings (arXiv:1809.01521), we he… ▽ More SOXS (Son Of X-Shooter) is the new medium resolution wide-band spectrograph to be installed at the 3.6m New Technology Telescope (NTT) in La Silla. SOXS will offer simultaneous wavelength coverage from 0.35 to 2.0 μm and will be dedicated to the study of transient and variable sources. While nominal optical performances of the system were presented in previous proceedings (arXiv:1809.01521), we here present a set of further analyses aimed to identify and quantify optical effects, due to changes in temperature and orientation of the instrument during alignment and operations. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: SPIE Astronomical Telescopes + Instrumentation, 13 pages, 13 figures, paper number 11447-70, SOXS

The AIV strategy of the Common Path of Son of X-Shooter

Authors: Federico Biondi, Kalyan Kumar Radhakrishnan Santhakumari, Riccardo Claudi, Matteo Aliverti, Luca Marafatto, Davide Greggio, Marco Dima, Gabriele Umbriaco, Nancy Elias-Rosa, Sergio Campana, Pietro Schipani, Andrea Baruffolo, Sagi Ben-Ami, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Hanindyo Kuncarayakti, Marco Landoni, Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali , et al. (26 additional authors not shown)

Abstract: Son Of X-Shooter (SOXS) is a double-armed (UV-VIS, NIR) spectrograph designed to be mounted at the ESO-NTT in La Silla, now in its Assembly Integration and Verification (AIV) phase. The instrument is designed following a modular approach so that each sub-system can be integrated in parallel before their assembly at system level. INAF-Osservatorio Astronomico di Padova will deliver the Common Path… ▽ More Son Of X-Shooter (SOXS) is a double-armed (UV-VIS, NIR) spectrograph designed to be mounted at the ESO-NTT in La Silla, now in its Assembly Integration and Verification (AIV) phase. The instrument is designed following a modular approach so that each sub-system can be integrated in parallel before their assembly at system level. INAF-Osservatorio Astronomico di Padova will deliver the Common Path (CP) sub-system, which represents the backbone of the entire instrument. In this paper, we describe the foreseen operation for the CP alignment and we report some results already achieved, showing that we envisaged the suitable setup and the strategy to meet the opto-mechanical requirements. △ Less

Submitted 23 December, 2020; originally announced December 2020.

The SOXS Data-Reduction Pipeline

Authors: David R. Young, Marco Landoni, Stephen J. Smartt, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Sagi Ben-Ami, Federico Biondi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Hanindyo Kuncarayakti, Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, Jani Achrén, José Antonio Araiza-Duran, Iair Arcavi, Anna Brucalassi , et al. (21 additional authors not shown)

Abstract: The SOXS is a dual-arm spectrograph (UV-VIS & NIR) and AC due to mounted on the ESO 3.6m NTT in La Silla. Designed to simultaneously cover the optical and NIR wavelength range from 350-2050 nm, the instrument will be dedicated to the study of transient and variable events with many Target of Opportunity requests expected. The goal of the SOXS Data Reduction pipeline is to use calibration data to… ▽ More The SOXS is a dual-arm spectrograph (UV-VIS & NIR) and AC due to mounted on the ESO 3.6m NTT in La Silla. Designed to simultaneously cover the optical and NIR wavelength range from 350-2050 nm, the instrument will be dedicated to the study of transient and variable events with many Target of Opportunity requests expected. The goal of the SOXS Data Reduction pipeline is to use calibration data to remove all instrument signatures from the SOXS scientific data frames for each of the supported instrument modes, convert this data into physical units and deliver them with their associated error bars to the ESO SAF as Phase 3 compliant science data products, all within 30 minutes. The primary reduced product will be a detrended, wavelength and flux calibrated, telluric corrected 1D spectrum with UV-VIS + NIR arms stitched together. The pipeline will also generate QC metrics to monitor telescope, instrument and detector health. The pipeline is written in Python 3 and has been built with an agile development philosophy that includes adaptive planning and evolutionary development. The pipeline is to be used by the SOXS consortium and the general user community that may want to perform tailored processing of SOXS data. Test driven development has been used throughout the build using `extreme' mock data. We aim for the pipeline to be easy to install and extensively and clearly documented. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: 15 pages, 11 figures. SPIE 2020

The SOXS scheduler for remote operation at LaSilla:Concept and design

Authors: Marco Landoni, Dave Young, Laurent Marty, Laura Asquini, Stephen J. Smartt, Alberto Trombetta, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Sagi Ben Ami, Federico Biondi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Hanindyo Kuncarayakti, Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, Jani Achren , et al. (24 additional authors not shown)

Abstract: In this paper we present the SOXS Scheduler, a web-based application aimed at optimising remote observations at the NTT-ESO in the context of scientific topics of both the SOXS Consortium and regular ESO proposals.This paper will give details of how detected transients from various surveys are inserted, prioritised, and selected for observations with SOXS at the NTT while kee** the correct shari… ▽ More In this paper we present the SOXS Scheduler, a web-based application aimed at optimising remote observations at the NTT-ESO in the context of scientific topics of both the SOXS Consortium and regular ESO proposals.This paper will give details of how detected transients from various surveys are inserted, prioritised, and selected for observations with SOXS at the NTT while kee** the correct sharing between GTO time (for the SOXSConsortium) and the regularly approved observing time from ESO proposals. For the 5-years of operation ofSOXS this vital piece of software will provide a night-by-night dynamical schedule, allowing the user to face rapid changes during the operations that might come from varying weather conditions or frequent target of opportunity (ToO) observations that require a rapid response. The scheduler is developed with high available and scalable architecture in mind and it implements the state-of-the-art technologies for API Restful application like Docker Containers, API Gateway, and Python-based Flask frameworks. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Comments: Proceedings of SPIE - Astronomical Telescopes and Instrumentation 2020 . Software and cyberinfrastrucutre for astronomy VI

Journal ref: SPIE AIT 2020

Sputtered MoRe SQUID-on-tip for high-field magnetic and thermal nanoimaging

Authors: Kousik Bagani, Jayanta Sarkar, Aviram Uri, Michael L. Rappaport, Martin E. Huber, Eli Zeldov, Yuri Myasoedov

Abstract: Scanning nanoscale superconducting quantum interference devices (SQUIDs) are gaining interest as highly sensitive microscopic magnetic and thermal characterization tools of quantum and topological states of matter and devices. Here we introduce a novel technique of collimated differential-pressure magnetron sputtering for versatile self aligned fabrication of SQUID on tip (SOT) nanodevices, which… ▽ More Scanning nanoscale superconducting quantum interference devices (SQUIDs) are gaining interest as highly sensitive microscopic magnetic and thermal characterization tools of quantum and topological states of matter and devices. Here we introduce a novel technique of collimated differential-pressure magnetron sputtering for versatile self aligned fabrication of SQUID on tip (SOT) nanodevices, which cannot be produced by conventional sputtering methods due to their diffusive, rather than the required directional point-source, deposition. The new technique provides access to a broad range of superconducting materials and alloys beyond the elemental superconductors employed in the existing thermal deposition methods, opening the route to greatly enhanced SOT characteristics and functionalities. Utilizing this method, we have developed MoRe SOT devices with sub-50 nm diameter, magnetic flux sensitivity of 1.2 $μΦ_0/Hz^{1/2}$ up to 3 T at 4.2 K, and thermal sensitivity better than 4 $μK/Hz^{1/2}$ up to 5 T, about five times higher than any previous report, paving the way to nanoscale imaging of magnetic and spintronic phenomena and of dissipation mechanisms in previously inaccessible quantum states of matter. △ Less

Submitted 25 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Applied 12, 044062 (2019)

Son of X--Shooter: a multi--band instrument for a multi--band universe

Authors: R. Claudi, S. Campana, P. Schipani, M. Aliverti, A. Baruffolo, S. Ben-Ami, F. Biondi, A. Brucalassi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Munari, A. Rubin, S. Scuderi, F. Vitali, J. Achren, J. Antonio Araiza-Duran, I. Arcavi, A. Bianco, E. Cappellaro, M. Colapietro, M. Della Valle , et al. (25 additional authors not shown)

Abstract: Son Of X-Shooter (SOXS) will be a new instrument designed to be mounted at the Nasmyth--A focus of the ESO 3.5 m New Technology Telescope in La Silla site (Chile). SOXS is composed of two high-efficiency spectrographs with a resolution slit product 4500, working in the visible (350 -- 850 nm) and NIR (800 -- 2000 nm) range respectively, and a light imager in the visible (the acquisition camera usa… ▽ More Son Of X-Shooter (SOXS) will be a new instrument designed to be mounted at the Nasmyth--A focus of the ESO 3.5 m New Technology Telescope in La Silla site (Chile). SOXS is composed of two high-efficiency spectrographs with a resolution slit product 4500, working in the visible (350 -- 850 nm) and NIR (800 -- 2000 nm) range respectively, and a light imager in the visible (the acquisition camera usable also for scientific purposes). The science case is very broad, it ranges from moving minor bodies in the solar system, to bursting young stellar objects, cataclysmic variables and X-ray binary transients in our Galaxy, supernovae and tidal disruption events in the local Universe, up to gamma-ray bursts in the very distant and young Universe, basically encompassing all distance scales and astronomy branches. At the moment, the instrument passed the Preliminary Design Review by ESO (July 2017) and the Final Design (with FDR in July 2018). △ Less

Submitted 17 December, 2018; originally announced December 2018.

Comments: 23 pages, 10 Figures, accepted to be published in Frontier Research in Astrophysics 2018 Conference proceedings in Proceeding of Science. arXiv admin note: text overlap with arXiv:1807.08828

The mechanical design of SOXS for the NTT

Authors: M Aliverti, O Hershko, O Diner, A Brucallassi, G Pignata, H Kuncarayakti, A Bianco, S Campana, R Claudi, P Schipani, A Baruffolo, S Ben-Ami, F Biondi, G Capasso, R Cosentino, F DAlessio, P DAvanzo, M Munari, A Rubin, S Scuderi, F Vitali, J Achrén, J. A. Araiza-Duran, I Arcavi, E Cappellaro , et al. (23 additional authors not shown)

Abstract: SOXS (Son of X-shooter) is a wide band, medium resolution spectrograph for the ESO NTT with a first light expected in 2021. The instrument will be composed by five semi-independent subsystems: a pre-slit Common Path, an Acquisition Camera, a Calibration Box, the NIR spectrograph, and the UV-VIS spectrograph. In this paper, we present the mechanical design of the subsystems, the kinematic mounts de… ▽ More SOXS (Son of X-shooter) is a wide band, medium resolution spectrograph for the ESO NTT with a first light expected in 2021. The instrument will be composed by five semi-independent subsystems: a pre-slit Common Path, an Acquisition Camera, a Calibration Box, the NIR spectrograph, and the UV-VIS spectrograph. In this paper, we present the mechanical design of the subsystems, the kinematic mounts developed to simplify the final integration procedure and the maintenance. The concept of the CP and NIR optomechanical mounts developed for a simple pre-alignment procedure and for the thermal compensation of reflective and refractive elements will be shown. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Journal ref: Telescope and Astronomical Instrumentation 2018, SPIE Conf

The VIS detector system of SOXS

Authors: Rosario Cosentino, Matteo Aliverti, Salvatore Scuderi, Sergio Campana, Riccardo Claudi, Pietro Schipani, Andrea Baruffolo, Sagi Ben-Ami, L. H. Mehrgan, Derek Ives, Federico Biondi, Anna Brucalassi, Giulio Capasso, Francesco D'Alessio, Paolo D'Avanzo, Oz Diner, Hanindyo Kuncarayakti, Matteo Munari, Adam Rubin, Fabrizio Vitali, Jani Achren, Jose Antonio Araiza-Duran, Iair Arcavi, Andrea Bianco, Enrico Cappellaro , et al. (24 additional authors not shown)

Abstract: SOXS will be a unique spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-1800 nm). In this article, we describe the design of the visible camera cryostat and the architecture of the acquisition system. The UV-VIS detector system is based on a e2v CCD 44-82, a custom detector head coupled w… ▽ More SOXS will be a unique spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-1800 nm). In this article, we describe the design of the visible camera cryostat and the architecture of the acquisition system. The UV-VIS detector system is based on a e2v CCD 44-82, a custom detector head coupled with the ESO continuous ow cryostats (CFC) cooling system and the NGC CCD controller developed by ESO. This paper outlines the status of the system and describes the design of the different parts that made up the UV-VIS arm and is accompanied by a series of contributions describing the SOXS design solutions. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 9 pages, 13 figures, to be published in SPIE Proceedings 10702

Architecture of the SOXS instrument control software

Authors: Davide Ricci, Andrea Baruffolo, Bernardo Salasnich, Daniela Fantinel, Josefina Urrutia, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Sagi Ben-Ami, Federico Biondi, Anna Brucalassi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Oz Diner, Hanindyo Kuncarayakti, Matteo Munari, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, Jani Achrén, José Antonio Araiza-Duran, Iair Arcavi , et al. (23 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a new spectrograph for the ESO NTT telescope, currently in the final design phase. The main instrument goal is to allow the characterization of transient sources based on alerts. It will cover from near-infrared to visible bands with a spectral resolution of $R \sim 4500$ using two separate, wavelength-optimized spectrographs. A visible camera, primarily intended for t… ▽ More SOXS (Son Of X-Shooter) is a new spectrograph for the ESO NTT telescope, currently in the final design phase. The main instrument goal is to allow the characterization of transient sources based on alerts. It will cover from near-infrared to visible bands with a spectral resolution of $R \sim 4500$ using two separate, wavelength-optimized spectrographs. A visible camera, primarily intended for target acquisition and secondary guiding, will also provide a scientific "light" imaging mode. In this paper we present the current status of the design of the SOXS instrument control software, which is in charge of controlling all instrument functions and detectors, coordinating the execution of exposures, and implementing all observation, calibration and maintenance procedures. Given the extensive experience of the SOXS consortium in the development of instruments for the VLT, we decided to base the design of the Control System on the same standards, both for hardware and software control. We illustrate the control network, the instrument functions and detectors to be controlled, the overall design of SOXS Instrument Software (INS) and its main components. Then, we provide details about the control software for the most SOXS-specific features: control of the COTS-based imaging camera, the flexures compensation system and secondary guiding. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 8 pages, 5 figures

Journal ref: Proc. SPIE 10707, Software and Cyberinfrastructure for Astronomy V, 107071G (6 July 2018)

SOXS Control Electronics Design

Authors: G. Capasso, M. Colapietro, S. D'Orsi, P. Schipani, M. Aliverti, H. Kuncarayakti, S. Scuderi, I. Coretti, S. Campana, R. Claudi, A. Baruffolo, S. Ben-Ami, F. Biondi, A. Brucalassi, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, M. Munari, A. Rubin, F. Vitali, J. Achrén, J. Antonio Araiza-Duran, I. Arcavi, A. Bianco , et al. (24 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a unique spectroscopic facility that will operate at the ESO New Technology Telescope (NTT) in La Silla from 2020 onward. The spectrograph will be able to cover simultaneously the UV-VIS and NIR bands exploiting two different arms and a Common Path feeding system. We present the design of the SOXS instrument control electronics. The electronics controls all the movements… ▽ More SOXS (Son Of X-Shooter) is a unique spectroscopic facility that will operate at the ESO New Technology Telescope (NTT) in La Silla from 2020 onward. The spectrograph will be able to cover simultaneously the UV-VIS and NIR bands exploiting two different arms and a Common Path feeding system. We present the design of the SOXS instrument control electronics. The electronics controls all the movements, alarms, cabinet temperatures, and electric interlocks of the instrument. We describe the main design concept. We decided to follow the ESO electronic design guidelines to minimize project time and risks and to simplify system maintenance. The design envisages Commercial Off-The-Shelf (COTS) industrial components (e.g. Beckhoff PLC and EtherCAT fieldbus modules) to obtain a modular design and to increase the overall reliability and maintainability. Preassembled industrial motorized stages are adopted allowing for high precision assembly standards and a high reliability. The electronics is kept off-board whenever possible to reduce thermal issues and instrument weight and to increase the accessibility for maintenance purpose. The instrument project went through the Preliminary Design Review in 2017 and is currently in Final Design Phase (with FDR in July 2018). This paper outlines the status of the work and is part of a series of contributions describing the SOXS design and properties after the instrument Preliminary Design Review. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 10 pages, 7 figures, to be publised in SPIE Proceedings 10707-90

The Acquisition Camera System for SOXS at NTT

Authors: A. Brucalassi, A. Araiza-Duran, G. Pignata, S. Campana, R. Claudi, P. Schipani, M. Aliverti, A. Baruffolo, S. Ben-Ami, F. Biondi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, D. Gardiol, O. Hershko, H. Kuncarayakti, M. Munari, D. Ricci, M. Riva, A. Rubin, R. Zanmar Sanchez, S. Scuderi, F. Vitali, J. Achrén , et al. (25 additional authors not shown)

Abstract: SOXS (Son of X-Shooter) will be the new medium resolution (R$\sim$4500 for a 1 arcsec slit), high-efficiency, wide band spectrograph for the ESO-NTT telescope on La Silla. It will be able to cover simultaneously optical and NIR bands (350-2000nm) using two different arms and a pre-slit Common Path feeding system. SOXS will provide an unique facility to follow up any kind of transient event with th… ▽ More SOXS (Son of X-Shooter) will be the new medium resolution (R$\sim$4500 for a 1 arcsec slit), high-efficiency, wide band spectrograph for the ESO-NTT telescope on La Silla. It will be able to cover simultaneously optical and NIR bands (350-2000nm) using two different arms and a pre-slit Common Path feeding system. SOXS will provide an unique facility to follow up any kind of transient event with the best possible response time in addition to high efficiency and availability. Furthermore, a Calibration Unit and an Acquisition Camera System with all the necessary relay optics will be connected to the Common Path sub-system. The Acquisition Camera, working in optical regime, will be primarily focused on target acquisition and secondary guiding, but will also provide an imaging mode for scientific photometry. In this work we give an overview of the Acquisition Camera System for SOXS with all the different functionalities. The optical and mechanical design of the system are also presented together with the preliminary performances in terms of optical quality, throughput, magnitude limits and photometric properties. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 9 pages, 7 figures, SPIE conference

MITS: the Multi-Imaging Transient Spectrograph for SOXS

Authors: Adam Rubin, Sagi Ben-Ami, Ofir Hershko, Michael Rappaport, Oz Diner, Avishay Gal-Yam, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Federico Biondi, Anna Brucalassi, Giulio Capasso, Rosario Cosentino, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Hanindyo Kuncarayakti, Hanindyo Kuncarayakti, Matteo Munari, Salvatore Scuderi, Fabrizio Vitali, Jani Achrén, José Antonio Araiza-Duran , et al. (25 additional authors not shown)

Abstract: The Son Of X-Shooter (SOXS) is a medium resolution spectrograph R~4500 proposed for the ESO 3.6 m NTT. We present the optical design of the UV-VIS arm of SOXS which employs high efficiency ion-etched gratings used in first order (m=1) as the main dispersers. The spectral band is split into four channels which are directed to individual gratings, and imaged simultaneously by a single three-element… ▽ More The Son Of X-Shooter (SOXS) is a medium resolution spectrograph R~4500 proposed for the ESO 3.6 m NTT. We present the optical design of the UV-VIS arm of SOXS which employs high efficiency ion-etched gratings used in first order (m=1) as the main dispersers. The spectral band is split into four channels which are directed to individual gratings, and imaged simultaneously by a single three-element catadioptric camera. The expected throughput of our design is >60% including contingency. The SOXS collaboration expects first light in early 2021. This paper is one of several papers presented in these proceedings describing the full SOXS instrument. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Optical design of the SOXS spectrograph for ESO NTT

Authors: Ricardo Zanmar Sanchez, Matteo Munari, Adam Rubin, Sagi Ben-Ami, Anna Brucalassi, Hanindyo Kuncarayakti, Jani Achrén, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Federico Biondi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Salvatore Scuderi, Fabrizio Vitali, José Antonio Araiza-Duran, Iair Arcavi, Andrea Bianco, Enrico Cappellaro, Mirko Colapietro, Massimo Della Valle , et al. (23 additional authors not shown)

Abstract: An overview of the optical design for the SOXS spectrograph is presented. SOXS (Son Of X-Shooter) is the new wideband, medium resolution (R>4500) spectrograph for the ESO 3.58m NTT telescope expected to start observations in 2021 at La Silla. The spectroscopic capabilities of SOXS are assured by two different arms. The UV-VIS (350-850 nm) arm is based on a novel concept that adopts the use of 4 io… ▽ More An overview of the optical design for the SOXS spectrograph is presented. SOXS (Son Of X-Shooter) is the new wideband, medium resolution (R>4500) spectrograph for the ESO 3.58m NTT telescope expected to start observations in 2021 at La Silla. The spectroscopic capabilities of SOXS are assured by two different arms. The UV-VIS (350-850 nm) arm is based on a novel concept that adopts the use of 4 ion-etched high efficiency transmission gratings. The NIR (800- 2000 nm) arm adopts the '4C' design (Collimator Correction of Camera Chromatism) successfully applied in X-Shooter. Other optical sub-systems are the imaging Acquisition Camera, the Calibration Unit and a pre-slit Common Path. We describe the optical design of the five sub-systems and report their performance in terms of spectral format, throughput and optical quality. This work is part of a series of contributions describing the SOXS design and properties as it is about to face the Final Design Review. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 9 pages, 9 figures, published in SPIE Proceedings 10702

Journal ref: Proc. SPIE 10702, 1070227 (2018)

The assembly integration and test activities for the new SOXS instrument at NTT

Authors: F. Biondi, R. Claudi, L. Marafatto, J. Farinato, D. Magrin, R. Ragazzoni, S. Campana, P. Schipani, M. Aliverti, A. Baruffolo, S. Ben-Ami, A. Brucalassi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Munari, A. Rubin, S. Scuderi, F. Vitali, J. Achrén, J. Antonio Araiza-Durán, I. Arcavi , et al. (26 additional authors not shown)

Abstract: Son Of X-Shooter (SOXS) is the new instrument for the ESO 3.5 m New Technology Telescope (NTT) in La Silla site (Chile) devised for the spectroscopic follow-up of transient sources. SOXS is composed by two medium resolution spectrographs able to cover the 350-2000 nm interval. An Acquisition Camera will provide a light imaging capability in the visible band. We present the procedure foreseen for t… ▽ More Son Of X-Shooter (SOXS) is the new instrument for the ESO 3.5 m New Technology Telescope (NTT) in La Silla site (Chile) devised for the spectroscopic follow-up of transient sources. SOXS is composed by two medium resolution spectrographs able to cover the 350-2000 nm interval. An Acquisition Camera will provide a light imaging capability in the visible band. We present the procedure foreseen for the Assembly, Integration and Test activities (AIT) of SOXS that will be carried out at sub-systems level at various consortium partner premises and at system level both in Europe and Chile. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 10 pages, 9 figures

Journal ref: Proc. SPIE 10702, 107023D (2018)

The NIR Spectrograph for the new SOXS instrument at the NTT

Authors: F. Vitali, M. Aliverti, G. Capasso, F. D'Alessio, M. Munari, M. Riva, S. Scuderi, R. Zanmar Sanchez, S. Campana, P. Schipani, R. Claudi, A. Baruffolo, S. Ben-Ami, F. Biondi, A. Brucalassi, R. Cosentino, D. Ricci, P. D'Avanzo, O. Diner, H. Kuncarayakti, A. Rubin, J. Achrén, J. A. Araiza-Duran, I. Arcavi, A. Bianco , et al. (22 additional authors not shown)

Abstract: We present the NIR spectrograph of the Son Of XShooter (SOXS) instrument for the ESO-NTT telescope at La Silla (Chile). SOXS is a R~4,500 mean resolution spectrograph, with a simultaneously coverage from about 0.35 to 2.00 μm. It will be mounted at the Nasmyth focus of the NTT. The two UV-VIS-NIR wavelength ranges will be covered by two separated arms. The NIR spectrograph is a fully cryogenic ech… ▽ More We present the NIR spectrograph of the Son Of XShooter (SOXS) instrument for the ESO-NTT telescope at La Silla (Chile). SOXS is a R~4,500 mean resolution spectrograph, with a simultaneously coverage from about 0.35 to 2.00 μm. It will be mounted at the Nasmyth focus of the NTT. The two UV-VIS-NIR wavelength ranges will be covered by two separated arms. The NIR spectrograph is a fully cryogenic echelle-dispersed spectrograph, working in the range 0.80-2.00 μm, equipped with an Hawaii H2RG IR array from Teledyne, working at 40 K. The spectrograph will be cooled down to about 150 K, to lower the thermal background, and equipped with a thermal filter to block any thermal radiation above 2.0 μm. In this poster we will show the main characteristics of the instrument along with the expected performances at the telescope. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: SPIE Conference, Astronomical Telescopes + Instrumentation

Journal ref: Proc. SPIE 10702, 1070228 (2018)

The Common Path of SOXS (Son of X-Shooter)

Authors: R. Claudi, M. Aliverti, F. Biondi, M. Munari, R. Zanmar R. Sanchez, S. Campana, P. Schipani, A. Baruffolo, S. Ben-Ami, A. Brucalassi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, A. Rubin, S. Scuderi, F. Vitali, J. Achrén, J. A. Araiza--Duran, I. Arcavi, A. Bianco, E. Cappellaro, M. Colapietro , et al. (22 additional authors not shown)

Abstract: Son of X-Shooter (SOXS) will be a high-efficiency spectrograph with a mean Resolution-Slit product of $\sim 4500$ (goal 5000) over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph and the Acquisition Camera) connected by the Common Path system to the NTT and the Calibrati… ▽ More Son of X-Shooter (SOXS) will be a high-efficiency spectrograph with a mean Resolution-Slit product of $\sim 4500$ (goal 5000) over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph and the Acquisition Camera) connected by the Common Path system to the NTT and the Calibration Unit. The Common Path is the backbone of the instrument and the interface to the NTT Nasmyth focus flange. The light coming from the focus of the telescope is split by the common path optics into the two different optical paths in order to feed the two spectrographs and the acquisition camera. The instrument project went through the Preliminary Design Review in 2017 and is currently in Final Design Phase (with FDR in July 2018). This paper outlines the status of the Common Path system and is accompanied by a series of contributions describing the SOXS design and properties after the instrument Preliminary Design Review. △ Less

Submitted 9 August, 2018; originally announced August 2018.

Comments: 11 pages, 10 figures, Telescope and Astronomical Instrumentation 2018, SPIE Conf. arXiv admin note: text overlap with arXiv:1807.08828

SOXS: a wide band spectrograph to follow up transients

Authors: P. Schipani, S. Campana, R. Claudi, H. U. Käufl, M. Accardo, M. Aliverti, A. Baruffolo, S. Ben-Ami, F. Biondi, A. Brucalassi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, D. Gardiol, H. Kuncarayakti, M. Munari, A. Rubin, S. Scuderi, F. Vitali, J. Achrén, J. Antonio Araiza-Duran, I. Arcavi, A. Bianco , et al. (27 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) will be a spectrograph for the ESO NTT telescope capable to cover the optical and NIR bands, based on the heritage of the X-Shooter at the ESO-VLT. SOXS will be built and run by an international consortium, carrying out rapid and longer term Target of Opportunity requests on a variety of astronomical objects. SOXS will observe all kind of transient and variable sources from… ▽ More SOXS (Son Of X-Shooter) will be a spectrograph for the ESO NTT telescope capable to cover the optical and NIR bands, based on the heritage of the X-Shooter at the ESO-VLT. SOXS will be built and run by an international consortium, carrying out rapid and longer term Target of Opportunity requests on a variety of astronomical objects. SOXS will observe all kind of transient and variable sources from different surveys. These will be a mixture of fast alerts (e.g. gamma-ray bursts, gravitational waves, neutrino events), mid-term alerts (e.g. supernovae, X-ray transients), fixed time events (e.g. close-by passage of minor bodies). While the focus is on transients and variables, still there is a wide range of other astrophysical targets and science topics that will benefit from SOXS. The design foresees a spectrograph with a Resolution-Slit product ~ 4500, capable of simultaneously observing over the entire band the complete spectral range from the U- to the H-band. The limiting magnitude of R~20 (1 hr at S/N~10) is suited to study transients identified from on-going imaging surveys. Light imaging capabilities in the optical band (grizy) are also envisaged to allow for multi-band photometry of the faintest transients. This paper outlines the status of the project, now in Final Design Phase. △ Less

Submitted 23 July, 2018; originally announced July 2018.

Comments: 12 pages, 14 figures, to be published in SPIE Proceedings 10702

A new scheme to measure the electron-neutrino correlation - the case of $^{6}$He

Authors: I. Mukul, M. Hass, O. Heber, T. Y. Hirsh, Y. Mishnayot, M. L. Rappaport, G. Ron, Y. Shachar, S. Vaintraub

Abstract: A novel experiment has been commissioned at the Weizmann Institute of Science for the study of weak interactions via a high-precision measurement of the beta-neutrino angular correlation in the radioactive decay of short-lived $^{6}$He. The facility consists of a 14 MeV $d+t$ neutron generator to produce atomic $^{6}$He, followed by ionization and bunching in an electron beam ion source, and injec… ▽ More A novel experiment has been commissioned at the Weizmann Institute of Science for the study of weak interactions via a high-precision measurement of the beta-neutrino angular correlation in the radioactive decay of short-lived $^{6}$He. The facility consists of a 14 MeV $d+t$ neutron generator to produce atomic $^{6}$He, followed by ionization and bunching in an electron beam ion source, and injection into an electrostatic ion beam trap. This ion trap has been designed for efficient detection of the decay products from trapped light ions. The storage time in the trap for different stable ions was found to be in the range of 0.6 to 1.2 s at the chamber pressure of $\sim$7$\times$10$^{-10}$ mbar. We present the initial test results of the facility, and also demonstrate an important upgrade of an existing method \cite{stora} for production of light radioactive atoms, viz. $^{6}$He, for the precision measurement. The production rate of $^{6}$He atoms in the present setup has been estimated to be $\sim 1.45\times10^{-4}$ atoms per neutron, and the system efficiency was found to be 4.0$\pm$0.6\%. An improvement to this setup is also presented for the enhanced production and diffusion of radioactive atoms for future use. △ Less

Submitted 22 November, 2017; originally announced November 2017.

Comments: 8 pages, 8 figures

Progress with Xenon Liquid Hole Multipliers

Authors: Lior Arazi, Eran Erdal, Yevgeniya Korotinsky, Michael Rappaport, Arindam Roy, Sergei Shchemelinin, David Vartsky, Amos Breskin

Abstract: The bubble-assisted Liquid Hole Multiplier (LHM) is a recently-proposed concept for the combined detection of ionization electrons and primary scintillation photons in noble-liquid time projection chambers. The LHM comprises a perforated micro-pattern electrode (e.g. Thick Gas Electron Multiplier - THGEM, or Gas Electron Multiplier - GEM) immersed in the liquid, with a bubble of the noble gas supp… ▽ More The bubble-assisted Liquid Hole Multiplier (LHM) is a recently-proposed concept for the combined detection of ionization electrons and primary scintillation photons in noble-liquid time projection chambers. The LHM comprises a perforated micro-pattern electrode (e.g. Thick Gas Electron Multiplier - THGEM, or Gas Electron Multiplier - GEM) immersed in the liquid, with a bubble of the noble gas supported underneath. Ionization electrons and scintillation-induced photoelectrons extracted from a cesium iodide photocathode drift through the electrode's holes and induce electroluminescence (EL) signals in the bubble; these are recorded by photon detectors located closely below the electrode. We present recent results in the development of LHMs, comparing the response of different electrodes to ionization and photon-induced electrons. △ Less

Submitted 31 July, 2017; originally announced August 2017.

Comments: Presented at 2016 IEEE NSS/MIC, Strasbourg, France, 29 October - 5 November 2016

The Cryogenic Storage Ring CSR

Authors: Robert von Hahn, Arno Becker, Felix Berg, Klaus Blaum, Christian Breitenfeldt, Hisham Fadil, Florian Fellenberger, Michael Froese, Sebastian George, Jürgen Göck, Manfred Grieser, Florian Grussie, Elisabeth A. Guerin, Oded Heber, Philipp Herwig, Jonas Karthein, Claude Krantz, Holger Kreckel, Michael Lange, Felix Laux, Svenja Lohmann, Sebastian Menk, Christian Meyer, Preeti M. Mishra, Oldřich Novotný , et al. (19 additional authors not shown)

Abstract: An electrostatic cryogenic storage ring, CSR, for beams of anions and cations with up to 300 keV kinetic energy per unit charge has been designed, constructed and put into operation. With a circumference of 35 m, the ion-beam vacuum chambers and all beam optics are in a cryostat and cooled by a closed-cycle liquid helium system. At temperatures as low as (5.5 $\pm$ 1) K inside the ring, storage ti… ▽ More An electrostatic cryogenic storage ring, CSR, for beams of anions and cations with up to 300 keV kinetic energy per unit charge has been designed, constructed and put into operation. With a circumference of 35 m, the ion-beam vacuum chambers and all beam optics are in a cryostat and cooled by a closed-cycle liquid helium system. At temperatures as low as (5.5 $\pm$ 1) K inside the ring, storage time constants of several minutes up to almost an hour were observed for atomic and molecular, anion and cation beams at an energy of 60 keV. The ion-beam intensity, energy-dependent closed-orbit shifts (dispersion) and the focusing properties of the machine were studied by a system of capacitive pickups. The Schottky-noise spectrum of the stored ions revealed a broadening of the momentum distribution on a time scale of 1000 s. Photodetachment of stored anions was used in the beam lifetime measurements. The detachment rate by anion collisions with residual-gas molecules was found to be extremely low. A residual-gas density below 140 cm$^{-3}$ is derived, equivalent to a room-temperature pressure below 10$^{-14}$ mbar. Fast atomic, molecular and cluster ion beams stored for long periods of time in a cryogenic environment will allow experiments on collision- and radiation-induced fragmentation processes of ions in known internal quantum states with merged and crossed photon and particle beams. △ Less

Submitted 5 June, 2016; originally announced June 2016.

Comments: PDFLaTeX with 17 pages, 16 figures, 2 tables. This article has been accepted by Review of Scientific Instruments. After it is published, it will be found at http://scitation.aip.org/content/aip/journal/rsi

First demonstration of VUV-photon detection in liquid xenon with THGEM and GEM-based Liquid Hole Multipliers

Authors: E. Erdal, L. Arazi, M. Rappaport, S. Shchemelinin, D. Vartsky, A. Breskin

Abstract: The bubble-assisted Liquid Hole-Multiplier (LHM) is a recently-introduced detection concept for noble-liquid time projection chambers. In this "local dual-phase" detection element, a gas bubble is supported underneath a perforated electrode (e.g., Thick Gas Electron Multiplier - THGEM, or Gas Electron Multiplier - GEM). Electrons drifting through the holes induce large electroluminescence signals… ▽ More The bubble-assisted Liquid Hole-Multiplier (LHM) is a recently-introduced detection concept for noble-liquid time projection chambers. In this "local dual-phase" detection element, a gas bubble is supported underneath a perforated electrode (e.g., Thick Gas Electron Multiplier - THGEM, or Gas Electron Multiplier - GEM). Electrons drifting through the holes induce large electroluminescence signals as they pass into the bubble. In this work we report on recent results of THGEM and GEM electrodes coated with cesium iodide and immersed in liquid xenon, allowing - for the first time - the detection of primary VUV scintillation photons in addition to ionization electrons using LHMs. △ Less

Submitted 24 March, 2016; originally announced March 2016.

Comments: Presented at the 2016 Vienna Conference on Instrumentation. Submitted to the conference proceedings in NIM A

Direct observation of bubble-assisted electroluminescence in liquid xenon

Authors: E. Erdal, L. Arazi, V. Chepel, M. L. Rappaport, D. Vartsky, A. Breskin

Abstract: Bubble formation in liquid xenon underneath a Thick Gaseous Electron Multiplier (THGEM) electrode immersed in liquid xenon was observed with a CCD camera. With voltage across the THGEM, the appearance of bubbles was correlated with that of electroluminescence signals induced by ionization electrons from alpha-particle tracks. This confirms recent indirect evidence that the observed photons are due… ▽ More Bubble formation in liquid xenon underneath a Thick Gaseous Electron Multiplier (THGEM) electrode immersed in liquid xenon was observed with a CCD camera. With voltage across the THGEM, the appearance of bubbles was correlated with that of electroluminescence signals induced by ionization electrons from alpha-particle tracks. This confirms recent indirect evidence that the observed photons are due to electroluminescence within a xenon vapor layer trapped under the electrode. The bubbles seem to emerge spontaneously due to heat flow from 300K into the liquid, or in a controlled manner, by locally boiling the liquid with resistive wires. Controlled bubble formation resulted in energy resolution of σ/E~7.5% for ~6,000 ionization electrons. The phenomenon could pave ways towards the conception of large-volume 'local dual-phase' noble-liquid TPCs. △ Less

Submitted 8 September, 2015; originally announced September 2015.

Comments: Submitted to JINST

Emergent nanoscale superparamagnetism at oxide interfaces

Authors: Yonathan Anahory, Lior Embon, Chang Jian Li, Sumilan Banerjee, Alexander Meltzer, Hoovinakatte R. Naren, Anton Yakovenko, Jo Cuppens, Yuri Myasoedov, Michael L. Rappaport, Martin E. Huber, Karen Michaeli, Thirumalai Venkatesan, Ariando, Eli Zeldov

Abstract: Atomically sharp oxide heterostructures exhibit a range of novel physical phenomena that do not occur in the parent bulk compounds. The most prominent example is the appearance of highly conducting and superconducting states at the interface between the band insulators LaAlO3 and SrTiO3. Here we report a new emergent phenomenon at the LaMnO3/SrTiO3 interface in which an antiferromagnetic insulator… ▽ More Atomically sharp oxide heterostructures exhibit a range of novel physical phenomena that do not occur in the parent bulk compounds. The most prominent example is the appearance of highly conducting and superconducting states at the interface between the band insulators LaAlO3 and SrTiO3. Here we report a new emergent phenomenon at the LaMnO3/SrTiO3 interface in which an antiferromagnetic insulator abruptly transforms into a magnetic state that exhibits unexpected nanoscale superparamagnetic dynamics. Upon increasing the thickness of LaMnO3 above five unit cells, our scanning nanoSQUID-on-tip microscopy shows spontaneous formation of isolated magnetic islands of 10 to 50 nm diameter, which display random moment reversals by thermal activation or in response to an in-plane magnetic field. Our charge reconstruction model of the polar LaMnO3/SrTiO3 heterostructure describes the sharp emergence of thermodynamic phase separation leading to nucleation of metallic ferromagnetic islands in an insulating antiferromagnetic matrix. The model further suggests that the nearby superparamagnetic-ferromagnetic transition can be gate tuned, holding potential for applications in magnetic storage and spintronics. △ Less

Submitted 7 September, 2015; originally announced September 2015.

Journal ref: Nature Communications 7,12566 (2016)

First results of a large-area cryogenic gaseous photomultiplier coupled to a dual-phase liquid xenon TPC

Authors: L. Arazi, A. E. C. Coimbra, E. Erdal, I. Israelashvili, M. L. Rappaport, S. Shchemelinin, D. Vartsky, J. M. F. dos Santos, A. Breskin

Abstract: We discuss recent advances in the development of cryogenic gaseous photomultipliers (GPM), for possible use in dark matter and other rare-event searches using noble-liquid targets. We present results from a 10 cm diameter GPM coupled to a dual-phase liquid xenon (LXe) TPC, demonstrating - for the first time - the feasibility of recording both primary ("S1") and secondary ("S2") scintillation signa… ▽ More We discuss recent advances in the development of cryogenic gaseous photomultipliers (GPM), for possible use in dark matter and other rare-event searches using noble-liquid targets. We present results from a 10 cm diameter GPM coupled to a dual-phase liquid xenon (LXe) TPC, demonstrating - for the first time - the feasibility of recording both primary ("S1") and secondary ("S2") scintillation signals. The detector comprised a triple Thick Gas Electron Multiplier (THGEM) structure with cesium iodide photocathode on the first element; it was shown to operate stably at 180 K with gains above 10^5, providing high single-photon detection efficiency even in the presence of large alpha particle-induced S2 signals comprising thousands of photoelectrons. S1 scintillation signals were recorded with a time resolution of 1.2 ns (RMS). The energy resolution (σ/E) for S2 electroluminescence of 5.5 MeV alpha particles was ~9%, which is comparable to that obtained in the XENON100 TPC with PMTs. The results are discussed within the context of potential GPM deployment in future multi-ton noble-liquid detectors. △ Less

Submitted 3 August, 2015; originally announced August 2015.

Comments: Submitted to JINST

Liquid Hole Multipliers: bubble-assisted electroluminescence in liquid xenon

Authors: L. Arazi, E. Erdal, A. E. C. Coimbra, M. L. Rappaport, D. Vartsky, V. Chepel, A. Breskin

Abstract: In this work we discuss the mechanism behind the large electroluminescence signals observed at relatively low electric fields in the holes of a Thick Gas Electron Multiplier (THGEM) electrode immersed in liquid xenon. We present strong evidence that the scintillation light is generated in xenon bubbles trapped below the THGEM holes. The process is shown to be remarkably stable over months of opera… ▽ More In this work we discuss the mechanism behind the large electroluminescence signals observed at relatively low electric fields in the holes of a Thick Gas Electron Multiplier (THGEM) electrode immersed in liquid xenon. We present strong evidence that the scintillation light is generated in xenon bubbles trapped below the THGEM holes. The process is shown to be remarkably stable over months of operation, providing - under specific thermodynamic conditions - energy resolution similar to that of present dual-phase liquid xenon experiments. The observed mechanism may serve as the basis for the development of Liquid Hole Multipliers (LHMs), capable of producing local charge-induced electroluminescence signals in large-volume single-phase noble-liquid detectors for dark matter and neutrino physics experiments. △ Less

Submitted 13 May, 2015; v1 submitted 9 May, 2015; originally announced May 2015.

Comments: Submitted to JINST