-
Channel Modeling for FR3 Upper Mid-band via Generative Adversarial Networks
Authors:
Yaqi Hu,
Mingsheng Yin,
Marco Mezzavilla,
Hao Guo,
Sundeep Rangan
Abstract:
The upper mid-band (FR3) has been recently attracting interest for new generation of mobile networks, as it provides a promising balance between spectrum availability and coverage, which are inherent limitations of the sub 6GHz and millimeter wave bands, respectively. In order to efficiently design and optimize the network, channel modeling plays a key role since FR3 systems are expected to operat…
▽ More
The upper mid-band (FR3) has been recently attracting interest for new generation of mobile networks, as it provides a promising balance between spectrum availability and coverage, which are inherent limitations of the sub 6GHz and millimeter wave bands, respectively. In order to efficiently design and optimize the network, channel modeling plays a key role since FR3 systems are expected to operate at multiple frequency bands. Data-driven methods, especially generative adversarial networks (GANs), can capture the intricate relationships among data samples, and provide an appropriate tool for FR3 channel modeling. In this work, we present the architecture, link state model, and path generative network of GAN-based FR3 channel modeling. The comparison of our model greatly matches the ray-tracing simulated data.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Spatially Consistent Air-to-Ground Channel Modeling via Generative Neural Networks
Authors:
Amedeo Giuliani,
Rasoul Nikbakht,
Giovanni Geraci,
Seongjoon Kang,
Angel Lozano,
Sundeep Rangan
Abstract:
This article proposes a generative neural network architecture for spatially consistent air-to-ground channel modeling. The approach considers the trajectories of uncrewed aerial vehicles along typical urban paths, capturing spatial dependencies within received signal strength (RSS) sequences from multiple cellular base stations (gNBs). Through the incorporation of conditioning data, the model acc…
▽ More
This article proposes a generative neural network architecture for spatially consistent air-to-ground channel modeling. The approach considers the trajectories of uncrewed aerial vehicles along typical urban paths, capturing spatial dependencies within received signal strength (RSS) sequences from multiple cellular base stations (gNBs). Through the incorporation of conditioning data, the model accurately discriminates between gNBs and drives the correlation matrix distance between real and generated sequences to minimal values. This enables evaluating performance and mobility management metrics with spatially (and by extension temporally) consistent RSS values, rather than independent snapshots. For some tasks underpinned by these metrics, say handovers, consistency is essential.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
Estimation of embedding vectors in high dimensions
Authors:
Golara Ahmadi Azar,
Melika Emami,
Alyson Fletcher,
Sundeep Rangan
Abstract:
Embeddings are a basic initial feature extraction step in many machine learning models, particularly in natural language processing. An embedding attempts to map data tokens to a low-dimensional space where similar tokens are mapped to vectors that are close to one another by some metric in the embedding space. A basic question is how well can such embedding be learned? To study this problem, we c…
▽ More
Embeddings are a basic initial feature extraction step in many machine learning models, particularly in natural language processing. An embedding attempts to map data tokens to a low-dimensional space where similar tokens are mapped to vectors that are close to one another by some metric in the embedding space. A basic question is how well can such embedding be learned? To study this problem, we consider a simple probability model for discrete data where there is some "true" but unknown embedding where the correlation of random variables is related to the similarity of the embeddings. Under this model, it is shown that the embeddings can be learned by a variant of low-rank approximate message passing (AMP) method. The AMP approach enables precise predictions of the accuracy of the estimation in certain high-dimensional limits. In particular, the methodology provides insight on the relations of key parameters such as the number of samples per value, the frequency of the terms, and the strength of the embedding correlation on the probability distribution. Our theoretical findings are validated by simulations on both synthetic data and real text data.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
5G Edge Vision: Wearable Assistive Technology for People with Blindness and Low Vision
Authors:
Tommy Azzino,
Marco Mezzavilla,
Sundeep Rangan,
Yao Wang,
John-Ross Rizzo
Abstract:
In an increasingly visual world, people with blindness and low vision (pBLV) face substantial challenges in navigating their surroundings and interpreting visual information. From our previous work, VIS4ION is a smart wearable that helps pBLV in their day-to-day challenges. It enables multiple artificial intelligence (AI)-based microservices such as visual scene processing, navigation, and vision-…
▽ More
In an increasingly visual world, people with blindness and low vision (pBLV) face substantial challenges in navigating their surroundings and interpreting visual information. From our previous work, VIS4ION is a smart wearable that helps pBLV in their day-to-day challenges. It enables multiple artificial intelligence (AI)-based microservices such as visual scene processing, navigation, and vision-language inference. These microservices require powerful computational resources and, in some cases, stringent inference times, hence the need to offload computation to edge servers. This paper introduces a novel video streaming platform that improves the capabilities of VIS4ION by providing real-time support of the microservices at the network edge. When video is offloaded wirelessly to the edge, the time-varying nature of the wireless network requires the use of adaptation strategies for a seamless video service. We demonstrate the performance of an adaptive real-time video streaming platform through experimentation with an open-source 5G deployment based on open air interface (OAI). The experiments demonstrate the ability to provide the microservices robustly in time-varying network loads.
△ Less
Submitted 23 November, 2023;
originally announced November 2023.
-
Terrestrial-Satellite Spectrum Sharing in the Upper Mid-Band with Interference Nulling
Authors:
Seongjoon Kang,
Giovanni Geraci,
Marco Mezzavilla,
Sundeep Rangan
Abstract:
The growing demand for broader bandwidth in cellular networks has turned the upper mid-band (7-24 GHz) into a focal point for expansion. However, the integration of terrestrial cellular and incumbent satellite services, particularly in the 12 GHz band, poses significant interference challenges. This paper investigates the interference dynamics in terrestrial-satellite coexistence scenarios and int…
▽ More
The growing demand for broader bandwidth in cellular networks has turned the upper mid-band (7-24 GHz) into a focal point for expansion. However, the integration of terrestrial cellular and incumbent satellite services, particularly in the 12 GHz band, poses significant interference challenges. This paper investigates the interference dynamics in terrestrial-satellite coexistence scenarios and introduces a novel beamforming approach that leverages available ephemeris data for dynamic interference mitigation. By establishing spatial radiation nulls directed towards visible satellites, our technique ensures the protection of satellite uplink communications without markedly compromising terrestrial downlink quality. Through a practical case study, we demonstrate that our approach maintains the satellite uplink signal-to-noise ratio (SNR) degradation under 0.1 dB and incurs only a negligible SNR penalty for the terrestrial downlink. Our findings offer a promising pathway for efficient spectrum sharing in the upper mid-band, fostering a concurrent enhancement in both terrestrial and satellite network capacity.
△ Less
Submitted 6 March, 2024; v1 submitted 21 November, 2023;
originally announced November 2023.
-
A Multi-Modal Foundation Model to Assist People with Blindness and Low Vision in Environmental Interaction
Authors:
Yu Hao,
Fan Yang,
Hao Huang,
Shuaihang Yuan,
Sundeep Rangan,
John-Ross Rizzo,
Yao Wang,
Yi Fang
Abstract:
People with blindness and low vision (pBLV) encounter substantial challenges when it comes to comprehensive scene recognition and precise object identification in unfamiliar environments. Additionally, due to the vision loss, pBLV have difficulty in accessing and identifying potential trip** hazards on their own. In this paper, we present a pioneering approach that leverages a large vision-langu…
▽ More
People with blindness and low vision (pBLV) encounter substantial challenges when it comes to comprehensive scene recognition and precise object identification in unfamiliar environments. Additionally, due to the vision loss, pBLV have difficulty in accessing and identifying potential trip** hazards on their own. In this paper, we present a pioneering approach that leverages a large vision-language model to enhance visual perception for pBLV, offering detailed and comprehensive descriptions of the surrounding environments and providing warnings about the potential risks. Our method begins by leveraging a large image tagging model (i.e., Recognize Anything (RAM)) to identify all common objects present in the captured images. The recognition results and user query are then integrated into a prompt, tailored specifically for pBLV using prompt engineering. By combining the prompt and input image, a large vision-language model (i.e., InstructBLIP) generates detailed and comprehensive descriptions of the environment and identifies potential risks in the environment by analyzing the environmental objects and scenes, relevant to the prompt. We evaluate our approach through experiments conducted on both indoor and outdoor datasets. Our results demonstrate that our method is able to recognize objects accurately and provide insightful descriptions and analysis of the environment for pBLV.
△ Less
Submitted 29 April, 2024; v1 submitted 31 October, 2023;
originally announced October 2023.
-
A Deep Learning Sequential Decoder for Transient High-Density Electromyography in Hand Gesture Recognition Using Subject-Embedded Transfer Learning
Authors:
Golara Ahmadi Azar,
Qin Hu,
Melika Emami,
Alyson Fletcher,
Sundeep Rangan,
S. Farokh Atashzar
Abstract:
Hand gesture recognition (HGR) has gained significant attention due to the increasing use of AI-powered human-computer interfaces that can interpret the deep spatiotemporal dynamics of biosignals from the peripheral nervous system, such as surface electromyography (sEMG). These interfaces have a range of applications, including the control of extended reality, agile prosthetics, and exoskeletons.…
▽ More
Hand gesture recognition (HGR) has gained significant attention due to the increasing use of AI-powered human-computer interfaces that can interpret the deep spatiotemporal dynamics of biosignals from the peripheral nervous system, such as surface electromyography (sEMG). These interfaces have a range of applications, including the control of extended reality, agile prosthetics, and exoskeletons. However, the natural variability of sEMG among individuals has led researchers to focus on subject-specific solutions. Deep learning methods, which often have complex structures, are particularly data-hungry and can be time-consuming to train, making them less practical for subject-specific applications. In this paper, we propose and develop a generalizable, sequential decoder of transient high-density sEMG (HD-sEMG) that achieves 73% average accuracy on 65 gestures for partially-observed subjects through subject-embedded transfer learning, leveraging pre-knowledge of HGR acquired during pre-training. The use of transient HD-sEMG before gesture stabilization allows us to predict gestures with the ultimate goal of counterbalancing system control delays. The results show that the proposed generalized models significantly outperform subject-specific approaches, especially when the training data is limited, and there is a significant number of gesture classes. By building on pre-knowledge and incorporating a multiplicative subject-embedded structure, our method comparatively achieves more than 13% average accuracy across partially observed subjects with minimal data availability. This work highlights the potential of HD-sEMG and demonstrates the benefits of modeling common patterns across users to reduce the need for large amounts of data for new users, enhancing practicality.
△ Less
Submitted 23 September, 2023;
originally announced October 2023.
-
Spectral vs Energy Efficiency in 6G: Impact of the Receiver Front-End
Authors:
Angel Lozano,
Sundeep Rangan
Abstract:
This article puts the spotlight on the receiver front-end (RFE), an integral part of any wireless device that information theory typically idealizes into a mere addition of noise. While this idealization was sound in the past, as operating frequencies, bandwidths, and antenna counts rise, a soaring amount of power is required for the RFE to behave accordingly. Containing this surge in power expend…
▽ More
This article puts the spotlight on the receiver front-end (RFE), an integral part of any wireless device that information theory typically idealizes into a mere addition of noise. While this idealization was sound in the past, as operating frequencies, bandwidths, and antenna counts rise, a soaring amount of power is required for the RFE to behave accordingly. Containing this surge in power expenditure exposes a harsher behavior on the part of the RFE (more noise, nonlinearities, and coarse quantization), setting up a tradeoff between the spectral efficiency under such nonidealities and the efficiency in the use of energy by the RFE. With the urge for radically better power consumptions and energy efficiencies in 6G, this emerges as an issue on which information theory can cast light at a fundamental level. More broadly, this article advocates the interest of having information theory embrace the device power consumption in its analyses. In turn, this calls for new models and abstractions such as the ones herein put together for the RFE, and for a more holistic perspective.
△ Less
Submitted 21 October, 2023; v1 submitted 4 October, 2023;
originally announced October 2023.
-
An Experimental Prototype for Multistatic Asynchronous ISAC
Authors:
Marco Canil,
Jacopo Pegoraro,
Jesus O. Lacruz,
Marco Mezzavilla,
Michele Rossi,
Joerg Widmer,
Sundeep Rangan
Abstract:
We prototype and validate a multistatic mmWave ISAC system based on IEEE802.11ay. Compensation of the clock asynchrony between each TX and RX pair is performed using the sole LoS wireless signal propagation. As a result, our system provides concurrent target tracking and micro-Doppler estimation from multiple points of view, paving the way for practical multistatic data fusion. Our results on huma…
▽ More
We prototype and validate a multistatic mmWave ISAC system based on IEEE802.11ay. Compensation of the clock asynchrony between each TX and RX pair is performed using the sole LoS wireless signal propagation. As a result, our system provides concurrent target tracking and micro-Doppler estimation from multiple points of view, paving the way for practical multistatic data fusion. Our results on human movement sensing, complemented with precise, quantitative GT data, demonstrate the enhanced sensing capabilities of multistatic ISAC, due to the spatial diversity of the receiver nodes.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
ViT-MDHGR: Cross-day Reliability and Agility in Dynamic Hand Gesture Prediction via HD-sEMG Signal Decoding
Authors:
Qin Hu,
Golara Ahmadi Azar,
Alyson Fletcher,
Sundeep Rangan,
S. Farokh Atashzar
Abstract:
Surface electromyography (sEMG) and high-density sEMG (HD-sEMG) biosignals have been extensively investigated for myoelectric control of prosthetic devices, neurorobotics, and more recently human-computer interfaces because of their capability for hand gesture recognition/prediction in a wearable and non-invasive manner. High intraday (same-day) performance has been reported. However, the interday…
▽ More
Surface electromyography (sEMG) and high-density sEMG (HD-sEMG) biosignals have been extensively investigated for myoelectric control of prosthetic devices, neurorobotics, and more recently human-computer interfaces because of their capability for hand gesture recognition/prediction in a wearable and non-invasive manner. High intraday (same-day) performance has been reported. However, the interday performance (separating training and testing days) is substantially degraded due to the poor generalizability of conventional approaches over time, hindering the application of such techniques in real-life practices. There are limited recent studies on the feasibility of multi-day hand gesture recognition. The existing studies face a major challenge: the need for long sEMG epochs makes the corresponding neural interfaces impractical due to the induced delay in myoelectric control. This paper proposes a compact ViT-based network for multi-day dynamic hand gesture prediction. We tackle the main challenge as the proposed model only relies on very short HD-sEMG signal windows (i.e., 50 ms, accounting for only one-sixth of the convention for real-time myoelectric implementation), boosting agility and responsiveness. Our proposed model can predict 11 dynamic gestures for 20 subjects with an average accuracy of over 71% on the testing day, 3-25 days after training. Moreover, when calibrated on just a small portion of data from the testing day, the proposed model can achieve over 92% accuracy by retraining less than 10% of the parameters for computational efficiency.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Cellular Wireless Networks in the Upper Mid-Band
Authors:
Seongjoon Kang,
Marco Mezzavilla,
Sundeep Rangan,
Arjuna Madanayake,
Satheesh Bojja Venkatakrishnan,
Gregory Hellbourg,
Monisha Ghosh,
Hamed Rahmani,
Aditya Dhananjay
Abstract:
The upper mid-band - roughly from 7 to 24 GHz - has attracted considerable recent interest for new cellular services. This frequency range has vastly more spectrum than the highly congested bands below 7 GHz while offering more favorable propagation and coverage than the millimeter wave (mmWave) frequencies. The upper mid-band can thus provide a powerful and complementary frequency range to balanc…
▽ More
The upper mid-band - roughly from 7 to 24 GHz - has attracted considerable recent interest for new cellular services. This frequency range has vastly more spectrum than the highly congested bands below 7 GHz while offering more favorable propagation and coverage than the millimeter wave (mmWave) frequencies. The upper mid-band can thus provide a powerful and complementary frequency range to balance coverage and capacity. Realizing the full potential of these bands, however, will require fundamental changes to the design of cellular systems. Most importantly, spectrum will likely need to be shared with incumbents including communication satellites, military RADAR, and radio astronomy. Also, the upper mid-band is simply a vast frequency range. Due to this wide bandwidth, combined with the directional nature of transmission and intermittent occupancy of incumbents, cellular systems will need to be agile to sense and intelligently use large spatial and frequency degrees of freedom. This paper attempts to provide an initial assessment of the feasibility and potential gains of wideband cellular systems operating in the upper mid-band. The study includes: (1) a system study to assess potential gains of multi-band systems in a representative dense urban environment and illustrate the value of wide band system with dynamic frequency selectivity; (2) an evaluation of potential cross interference between satellites and terrestrial cellular services and interference nulling to reduce that interference; and (3) design and evaluation of a compact multi-band antenna array structure. Leveraging these preliminary results, we identify potential future research directions to realize next-generation systems in these frequencies.
△ Less
Submitted 6 March, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Wide-Aperture MIMO via Reflection off a Smooth Surface
Authors:
Andrea Pizzo,
Angel Lozano,
Sundeep Rangan,
Thomas Marzetta
Abstract:
This paper provides a deterministic channel model for a scenario where wireless connectivity is established through a reflection off a smooth planar surface of an infinite extent. The developed model is rigorously built upon the physics of wave propagation and is as precise as tight are the unboundedness and smoothness assumptions on the surface. This model allows establishing how line-of-sight mu…
▽ More
This paper provides a deterministic channel model for a scenario where wireless connectivity is established through a reflection off a smooth planar surface of an infinite extent. The developed model is rigorously built upon the physics of wave propagation and is as precise as tight are the unboundedness and smoothness assumptions on the surface. This model allows establishing how line-of-sight multiantenna communication is altered by a reflection off an electrically large surface, a situation of high interest for mmWave and terahertz frequencies.
△ Less
Submitted 21 August, 2023;
originally announced August 2023.
-
Zero-Shot Wireless Indoor Navigation through Physics-Informed Reinforcement Learning
Authors:
Mingsheng Yin,
Tao Li,
Haozhe Lei,
Yaqi Hu,
Sundeep Rangan,
Quanyan Zhu
Abstract:
The growing focus on indoor robot navigation utilizing wireless signals has stemmed from the capability of these signals to capture high-resolution angular and temporal measurements. Prior heuristic-based methods, based on radio frequency propagation, are intuitive and generalizable across simple scenarios, yet fail to navigate in complex environments. On the other hand, end-to-end (e2e) deep rein…
▽ More
The growing focus on indoor robot navigation utilizing wireless signals has stemmed from the capability of these signals to capture high-resolution angular and temporal measurements. Prior heuristic-based methods, based on radio frequency propagation, are intuitive and generalizable across simple scenarios, yet fail to navigate in complex environments. On the other hand, end-to-end (e2e) deep reinforcement learning (RL), powered by advanced computing machinery, can explore the entire state space, delivering surprising performance when facing complex wireless environments. However, the price to pay is the astronomical amount of training samples, and the resulting policy, without fine-tuning (zero-shot), is unable to navigate efficiently in new scenarios unseen in the training phase. To equip the navigation agent with sample-efficient learning and {zero-shot} generalization, this work proposes a novel physics-informed RL (PIRL) where a distance-to-target-based cost (standard in e2e) is augmented with physics-informed reward sha**. The key intuition is that wireless environments vary, but physics laws persist. After learning to utilize the physics information, the agent can transfer this knowledge across different tasks and navigate in an unknown environment without fine-tuning. The proposed PIRL is evaluated using a wireless digital twin (WDT) built upon simulations of a large class of indoor environments from the AI Habitat dataset augmented with electromagnetic (EM) radiation simulation for wireless signals. It is shown that the PIRL significantly outperforms both e2e RL and heuristic-based solutions in terms of generalization and performance. Source code is available at \url{https://github.com/Panshark/PIRL-WIN}.
△ Less
Submitted 15 September, 2023; v1 submitted 11 June, 2023;
originally announced June 2023.
-
Local Convergence of Gradient Descent-Ascent for Training Generative Adversarial Networks
Authors:
Evan Becker,
Parthe Pandit,
Sundeep Rangan,
Alyson K. Fletcher
Abstract:
Generative Adversarial Networks (GANs) are a popular formulation to train generative models for complex high dimensional data. The standard method for training GANs involves a gradient descent-ascent (GDA) procedure on a minimax optimization problem. This procedure is hard to analyze in general due to the nonlinear nature of the dynamics. We study the local dynamics of GDA for training a GAN with…
▽ More
Generative Adversarial Networks (GANs) are a popular formulation to train generative models for complex high dimensional data. The standard method for training GANs involves a gradient descent-ascent (GDA) procedure on a minimax optimization problem. This procedure is hard to analyze in general due to the nonlinear nature of the dynamics. We study the local dynamics of GDA for training a GAN with a kernel-based discriminator. This convergence analysis is based on a linearization of a non-linear dynamical system that describes the GDA iterations, under an \textit{isolated points model} assumption from [Becker et al. 2022]. Our analysis brings out the effect of the learning rates, regularization, and the bandwidth of the kernel discriminator, on the local convergence rate of GDA. Importantly, we show phase transitions that indicate when the system converges, oscillates, or diverges. We also provide numerical simulations that verify our claims.
△ Less
Submitted 29 May, 2023; v1 submitted 14 May, 2023;
originally announced May 2023.
-
JUMP: Joint communication and sensing with Unsynchronized transceivers Made Practical
Authors:
Jacopo Pegoraro,
Jesus O. Lacruz,
Tommy Azzino,
Marco Mezzavilla,
Michele Rossi,
Joerg Widmer,
Sundeep Rangan
Abstract:
Wideband millimeter-wave communication systems can be extended to provide radar-like sensing capabilities on top of data communication, in a cost-effective manner. However, the development of joint communication and sensing technology is hindered by practical challenges, such as occlusions to the line-of-sight path and clock asynchrony between devices. The latter introduces time-varying timing and…
▽ More
Wideband millimeter-wave communication systems can be extended to provide radar-like sensing capabilities on top of data communication, in a cost-effective manner. However, the development of joint communication and sensing technology is hindered by practical challenges, such as occlusions to the line-of-sight path and clock asynchrony between devices. The latter introduces time-varying timing and frequency offsets that prevent the estimation of sensing parameters and, in turn, the use of standard signal processing solutions. Existing approaches cannot be applied to commonly used phased-array receivers, as they build on stringent assumptions about the multipath environment, and are computationally complex. We present JUMP, the first system enabling practical bistatic and asynchronous joint communication and sensing, while achieving accurate target tracking and micro-Doppler extraction in realistic conditions. Our system compensates for the timing offset by exploiting the channel correlation across subsequent packets. Further, it tracks multipath reflections and eliminates frequency offsets by observing the phase of a dynamically-selected static reference path. JUMP has been implemented on a 60 GHz experimental platform, performing extensive evaluations of human motion sensing, including non-line-of-sight scenarios. In our results, JUMP attains comparable tracking performance to a full-duplex monostatic system and similar micro-Doppler quality with respect to a phase-locked bistatic receiver.
△ Less
Submitted 8 June, 2024; v1 submitted 16 April, 2023;
originally announced April 2023.
-
Topological Surface Magnetism and Neel Vector Control in a Magnetoelectric Antiferromagnet
Authors:
Kai Du,
Xianghan Xu,
Choongjae Won,
Kefeng Wang,
Scott A. Crooker,
Sylvie Rangan,
Robert Bartynski,
Sang-Wook Cheong
Abstract:
Antiferromagnetic states with no stray magnetic fields can enable high-density ultra-fast spintronic technologies. However, the detection and control of antiferromagnetic Neel vectors remain challenging. Linear magnetoelectric antiferromagnets (LMAs) may provide new pathways, but applying simultaneous electric and magnetic fields, necessary to control Neel vectors in LMAs, is cumbersome and imprac…
▽ More
Antiferromagnetic states with no stray magnetic fields can enable high-density ultra-fast spintronic technologies. However, the detection and control of antiferromagnetic Neel vectors remain challenging. Linear magnetoelectric antiferromagnets (LMAs) may provide new pathways, but applying simultaneous electric and magnetic fields, necessary to control Neel vectors in LMAs, is cumbersome and impractical for most applications. Herein, we show that Cr2O3, a prototypical room-temperature LMA, carries a topologically-protected surface magnetism in all surfaces, which stems from intrinsic surface electric fields due to band bending, combined with the bulk linear magnetoelectricity. Consequently, bulk Neel vectors with zero bulk magnetization can be simply tuned by magnetic fields through controlling the magnetizations associated with the surface magnetism. Our results imply that the surface magnetizations discovered in Cr2O3 should be also present in all LMAs.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Path Planning Under Uncertainty to Localize mmWave Sources
Authors:
Kai Pfeiffer,
Yuze Jia,
Mingsheng Yin,
Akshaj Kumar Veldanda,
Yaqi Hu,
Amee Trivedi,
Jeff Zhang,
Siddharth Garg,
Elza Erkip,
Sundeep Rangan,
Ludovic Righetti
Abstract:
In this paper, we study a navigation problem where a mobile robot needs to locate a mmWave wireless signal. Using the directionality properties of the signal, we propose an estimation and path planning algorithm that can efficiently navigate in cluttered indoor environments. We formulate Extended Kalman filters for emitter location estimation in cases where the signal is received in line-of-sight…
▽ More
In this paper, we study a navigation problem where a mobile robot needs to locate a mmWave wireless signal. Using the directionality properties of the signal, we propose an estimation and path planning algorithm that can efficiently navigate in cluttered indoor environments. We formulate Extended Kalman filters for emitter location estimation in cases where the signal is received in line-of-sight or after reflections. We then propose to plan motion trajectories based on belief-space dynamics in order to minimize the uncertainty of the position estimates. The associated non-linear optimization problem is solved by a state-of-the-art constrained iLQR solver. In particular, we propose a method that can handle a large number of obstacles (~300) with reasonable computation times. We validate the approach in an extensive set of simulations. We show that our estimators can help increase navigation success rate and that planning to reduce estimation uncertainty can improve the overall task completion speed.
△ Less
Submitted 8 March, 2023; v1 submitted 7 March, 2023;
originally announced March 2023.
-
Ultra-thin Epitaxial MgB2 on SiC: Substrate Surface Polarity Dependent Properties
Authors:
Weibing Yang,
Leila Kasaei,
Hussein Hijazi,
Sylvie Rangan,
Yao-wen Yeh,
Raj K. Sah,
Jay R. Paudel,
Ke Chen,
Alexander X. Gray,
Philip Batson,
Leonard C. Feldman,
Xiaoxing Xi
Abstract:
High quality, ultrathin, superconducting films are required for advanced devices such as hot-electron bolometers, superconducting nanowire single photon detectors, and quantum applications. Using Hybrid Physical-Chemical Vapor Deposition (HPCVD), we show that MgB2 films as thin as 4 nm can be fabricated on the carbon terminated 6H-SiC (0001) surface with a superconducting transition temperature ab…
▽ More
High quality, ultrathin, superconducting films are required for advanced devices such as hot-electron bolometers, superconducting nanowire single photon detectors, and quantum applications. Using Hybrid Physical-Chemical Vapor Deposition (HPCVD), we show that MgB2 films as thin as 4 nm can be fabricated on the carbon terminated 6H-SiC (0001) surface with a superconducting transition temperature above 33K and a rms roughness of 0.7 nm. Remarkably, the film quality is a function of the SiC surface termination, with the C-terminated surface preferred to the Si-terminated surface. To understand the MgB2 thin film/ SiC substrate interactions giving rise to this difference, we characterized the interfacial structures using Rutherford backscattering spectroscopy/channeling, electron energy loss spectroscopy, and x-ray photoemission spectroscopy. The MgB2/SiC interface structure is complex and different for the two terminations. Both terminations incorporate substantial unintentional oxide layers influencing MgB2 growth and morphology, but with different extent, intermixing and interface chemistry. In this paper, we report measurements of transport, resistivity, and critical superconducting temperature of MgB2/SiC that are different for the two terminations, and link interfacial structure variations to observed differences. The result shows that the C face of SiC is a preferred substrate for the deposition of ultrathin superconducting MgB2 films.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
Multi-Frequency Channel Modeling for Millimeter Wave and THz Wireless Communication via Generative Adversarial Networks
Authors:
Yaqi Hu,
Mingsheng Yin,
William Xia,
Sundeep Rangan,
Marco Mezzavilla
Abstract:
Modern cellular systems rely increasingly on simultaneous communication in multiple discontinuous bands for macro-diversity and increased bandwidth. Multi-frequency communication is particularly crucial in the millimeter wave (mmWave) and Terahertz (THz) frequencies, as these bands are often coupled with lower frequencies for robustness. Evaluation of these systems requires statistical models that…
▽ More
Modern cellular systems rely increasingly on simultaneous communication in multiple discontinuous bands for macro-diversity and increased bandwidth. Multi-frequency communication is particularly crucial in the millimeter wave (mmWave) and Terahertz (THz) frequencies, as these bands are often coupled with lower frequencies for robustness. Evaluation of these systems requires statistical models that can capture the joint distribution of the channel paths across multiple frequencies. This paper presents a general neural network based methodology for training multi-frequency double directional statistical channel models. In the proposed approach, each is described as a multi-clustered set, and a generative adversarial network (GAN) is trained to generate random multi-cluster profiles where the generated cluster data includes the angles and delay of the clusters along with the vectors of random received powers, angular, and delay spread at different frequencies. The model can be readily applied for multi-frequency link or network layer simulation. The methodology is demonstrated on modeling urban micro-cellular links at 28 and 140 GHz trained from extensive ray tracing data. The methodology makes minimal statistical assumptions and experiments show the model can capture interesting statistical relationships between frequencies.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Coexistence of UAVs and Terrestrial Users in Millimeter-Wave Urban Networks
Authors:
Seongjoon Kang,
Marco Mezzavilla,
Angel Lozano,
Giovanni Geraci,
Sundeep Rangan,
Vasilii Semkin,
William Xia,
Giuseppe Loianno
Abstract:
5G millimeter-wave (mmWave) cellular networks are in the early phase of commercial deployments and present a unique opportunity for robust, high-data-rate communication to unmanned aerial vehicles (UAVs). A fundamental question is whether and how mmWave networks designed for terrestrial users should be modified to serve UAVs. The paper invokes realistic cell layouts, antenna patterns, and channel…
▽ More
5G millimeter-wave (mmWave) cellular networks are in the early phase of commercial deployments and present a unique opportunity for robust, high-data-rate communication to unmanned aerial vehicles (UAVs). A fundamental question is whether and how mmWave networks designed for terrestrial users should be modified to serve UAVs. The paper invokes realistic cell layouts, antenna patterns, and channel models trained from extensive ray tracing data to assess the performance of various network alternatives. Importantly, the study considers the addition of dedicated uptilted rooftop-mounted cells for aerial coverage, as well as novel spectrum sharing modes between terrestrial and aerial network operators. The effect of power control and of multiuser multiple-input multiple-output are also studied.
△ Less
Submitted 20 September, 2022; v1 submitted 19 September, 2022;
originally announced September 2022.
-
Instability and Local Minima in GAN Training with Kernel Discriminators
Authors:
Evan Becker,
Parthe Pandit,
Sundeep Rangan,
Alyson K. Fletcher
Abstract:
Generative Adversarial Networks (GANs) are a widely-used tool for generative modeling of complex data. Despite their empirical success, the training of GANs is not fully understood due to the min-max optimization of the generator and discriminator. This paper analyzes these joint dynamics when the true samples, as well as the generated samples, are discrete, finite sets, and the discriminator is k…
▽ More
Generative Adversarial Networks (GANs) are a widely-used tool for generative modeling of complex data. Despite their empirical success, the training of GANs is not fully understood due to the min-max optimization of the generator and discriminator. This paper analyzes these joint dynamics when the true samples, as well as the generated samples, are discrete, finite sets, and the discriminator is kernel-based. A simple yet expressive framework for analyzing training called the $\textit{Isolated Points Model}$ is introduced. In the proposed model, the distance between true samples greatly exceeds the kernel width, so each generated point is influenced by at most one true point. Our model enables precise characterization of the conditions for convergence, both to good and bad minima. In particular, the analysis explains two common failure modes: (i) an approximate mode collapse and (ii) divergence. Numerical simulations are provided that predictably replicate these behaviors.
△ Less
Submitted 21 August, 2022;
originally announced August 2022.
-
Wireless Channel Prediction in Partially Observed Environments
Authors:
Mingsheng Yin,
Yaqi Hu,
Tommy Azzino,
Seongjoon Kang,
Marco Mezzavilla,
Sundeep Rangan
Abstract:
Site-specific radio frequency (RF) propagation prediction increasingly relies on models built from visual data such as cameras and LIDAR sensors. When operating in dynamic settings, the environment may only be partially observed. This paper introduces a method to extract statistical channel models, given partial observations of the surrounding environment. We propose a simple heuristic algorithm t…
▽ More
Site-specific radio frequency (RF) propagation prediction increasingly relies on models built from visual data such as cameras and LIDAR sensors. When operating in dynamic settings, the environment may only be partially observed. This paper introduces a method to extract statistical channel models, given partial observations of the surrounding environment. We propose a simple heuristic algorithm that performs ray tracing on the partial environment and then uses machine-learning trained predictors to estimate the channel and its uncertainty from features extracted from the partial ray tracing results. It is shown that the proposed method can interpolate between fully statistical models when no partial information is available and fully deterministic models when the environment is completely observed. The method can also capture the degree of uncertainty of the propagation predictions depending on the amount of region that has been explored. The methodology is demonstrated in a robotic navigation application simulated on a set of indoor maps with detailed models constructed using state-of-the-art navigation, simultaneous localization and map** (SLAM), and computer vision methods.
△ Less
Submitted 2 July, 2022;
originally announced July 2022.
-
Parametrization and Estimation of High-Rank Line-of-Sight MIMO Channels with Reflected Paths
Authors:
Yaqi Hu,
Mingsheng Yin,
Sundeep Rangan,
Marco Mezzavilla
Abstract:
High-rank line-of-sight (LOS) MIMO systems have attracted considerable attention for millimeter wave and THz communications. The small wavelengths in these frequencies enable spatial multiplexing with massive data rates at long distances. Such systems are also being considered for multi-path non-LOS (NLOS) environments. In these scenarios, standard channel models based on plane waves cannot captur…
▽ More
High-rank line-of-sight (LOS) MIMO systems have attracted considerable attention for millimeter wave and THz communications. The small wavelengths in these frequencies enable spatial multiplexing with massive data rates at long distances. Such systems are also being considered for multi-path non-LOS (NLOS) environments. In these scenarios, standard channel models based on plane waves cannot capture the curvature of each wave front necessary to model spatial multiplexing. This work presents a novel and simple multi-path wireless channel parametrization where each path is replaced by a LOS path with a reflected image source. The model fully is valid for all paths with specular planar reflections and captures the spherical nature of each wave front. Importantly, it is shown that the model uses only two additional parameters relative to the standard plane wave model. Moreover, the parameters can be easily captured in standard ray tracing. The accuracy of the approach is demonstrated on detailed ray tracing simulations at 28 GHz and 140 GHz in a dense urban area.
△ Less
Submitted 14 April, 2023; v1 submitted 11 May, 2022;
originally announced May 2022.
-
Line-of-Sight MIMO via Reflection From a Smooth Surface
Authors:
Andrea Pizzo,
Angel Lozano,
Sundeep Rangan,
Thomas Marzetta
Abstract:
We provide a deterministic channel model for a scenario where wireless connectivity is established through a reflection from a planar smooth surface of an infinite extent. The developed model is rigorously built upon the physics of wave propagation, and is as precise as tight are the unboundedness and smoothness assumptions on the surface. This model allows establishing that line-of-sight spatial…
▽ More
We provide a deterministic channel model for a scenario where wireless connectivity is established through a reflection from a planar smooth surface of an infinite extent. The developed model is rigorously built upon the physics of wave propagation, and is as precise as tight are the unboundedness and smoothness assumptions on the surface. This model allows establishing that line-of-sight spatial multiplexing can take place via reflection off an electrically large surface, a situation of high interest for mmWave and terahertz frequencies.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Quantized MIMO: Channel Capacity and Spectrospatial Power Distribution
Authors:
Abbas Khalili,
Elza Erkip,
Sundeep Rangan
Abstract:
Millimeter wave systems suffer from high power consumption and are constrained to use low resolution quantizers --digital to analog and analog to digital converters (DACs and ADCs). However, low resolution quantization leads to reduced data rate and increased out-of-band emission noise. In this paper, a multiple-input multiple-output (MIMO) system with linear transceivers using low resolution DACs…
▽ More
Millimeter wave systems suffer from high power consumption and are constrained to use low resolution quantizers --digital to analog and analog to digital converters (DACs and ADCs). However, low resolution quantization leads to reduced data rate and increased out-of-band emission noise. In this paper, a multiple-input multiple-output (MIMO) system with linear transceivers using low resolution DACs and ADCs is considered. An information-theoretic analysis of the system to model the effect of quantization on spectrospatial power distribution and capacity of the system is provided. More precisely, it is shown that the impact of quantization can be accurately described via a linear model with additive independent Gaussian noise. This model in turn leads to simple and intuitive expressions for spectrospatial power distribution of the transmitter and a lower bound on the achievable rate of the system. Furthermore, the derived model is validated through simulations and numerical evaluations, where it is shown to accurately predict both spectral and spatial power distributions.
△ Less
Submitted 6 February, 2022;
originally announced February 2022.
-
Kernel Methods and Multi-layer Perceptrons Learn Linear Models in High Dimensions
Authors:
Mojtaba Sahraee-Ardakan,
Melikasadat Emami,
Parthe Pandit,
Sundeep Rangan,
Alyson K. Fletcher
Abstract:
Empirical observation of high dimensional phenomena, such as the double descent behaviour, has attracted a lot of interest in understanding classical techniques such as kernel methods, and their implications to explain generalization properties of neural networks. Many recent works analyze such models in a certain high-dimensional regime where the covariates are independent and the number of sampl…
▽ More
Empirical observation of high dimensional phenomena, such as the double descent behaviour, has attracted a lot of interest in understanding classical techniques such as kernel methods, and their implications to explain generalization properties of neural networks. Many recent works analyze such models in a certain high-dimensional regime where the covariates are independent and the number of samples and the number of covariates grow at a fixed ratio (i.e. proportional asymptotics). In this work we show that for a large class of kernels, including the neural tangent kernel of fully connected networks, kernel methods can only perform as well as linear models in this regime. More surprisingly, when the data is generated by a kernel model where the relationship between input and the response could be very nonlinear, we show that linear models are in fact optimal, i.e. linear models achieve the minimum risk among all models, linear or nonlinear. These results suggest that more complex models for the data other than independent features are needed for high-dimensional analysis.
△ Less
Submitted 20 January, 2022;
originally announced January 2022.
-
Understanding Energy Efficiency and Interference Tolerance in Millimeter Wave Receivers
Authors:
Panagiotis Skrimponis,
Seongjoon Kang,
Abbas Khalili,
Wonho Lee,
Navid Hosseinzadeh,
Marco Mezzavilla,
Elza Erkip,
Mark J. W. Rodwell,
James F. Buckwalter,
Sundeep Rangan
Abstract:
Power consumption is a key challenge in millimeter wave (mmWave) receiver front-ends, due to the need to support high dimensional antenna arrays at wide bandwidths. Recently, there has been considerable work in develo** low-power front-ends, often based on low-resolution ADCs and low-power mixers. A critical but less studied consequence of such designs is the relatively low-dynamic range which i…
▽ More
Power consumption is a key challenge in millimeter wave (mmWave) receiver front-ends, due to the need to support high dimensional antenna arrays at wide bandwidths. Recently, there has been considerable work in develo** low-power front-ends, often based on low-resolution ADCs and low-power mixers. A critical but less studied consequence of such designs is the relatively low-dynamic range which in turn exposes the receiver to adjacent carrier interference and blockers. This paper provides a general mathematical framework for analyzing the performance of mmWave front-ends in the presence of out-of-band interference. The goal is to elucidate the fundamental trade-off of power consumption, interference tolerance and in-band performance. The analysis is combined with detailed network simulations in cellular systems with multiple carriers, as well as detailed circuit simulations of key components at 140 GHz. The analysis reveals critical bottlenecks for low-power interference robustness and suggests designs enhancements for use in practical systems.
△ Less
Submitted 1 January, 2022;
originally announced January 2022.
-
Network-Aware 5G Edge Computing for Object Detection: Augmenting Wearables to "See" More, Farther and Faster
Authors:
Zhongzheng Yuan,
Tommy Azzino,
Yu Hao,
Yixuan Lyu,
Haoyang Pei,
Alain Boldini,
Marco Mezzavilla,
Mahya Beheshti,
Maurizio Porfiri,
Todd Hudson,
William Seiple,
Yi Fang,
Sundeep Rangan,
Yao Wang,
J. R. Rizzo
Abstract:
Advanced wearable devices are increasingly incorporating high-resolution multi-camera systems. As state-of-the-art neural networks for processing the resulting image data are computationally demanding, there has been growing interest in leveraging fifth generation (5G) wireless connectivity and mobile edge computing for offloading this processing to the cloud. To assess this possibility, this pape…
▽ More
Advanced wearable devices are increasingly incorporating high-resolution multi-camera systems. As state-of-the-art neural networks for processing the resulting image data are computationally demanding, there has been growing interest in leveraging fifth generation (5G) wireless connectivity and mobile edge computing for offloading this processing to the cloud. To assess this possibility, this paper presents a detailed simulation and evaluation of 5G wireless offloading for object detection within a powerful, new smart wearable called VIS4ION, for the Blind-and-Visually Impaired (BVI). The current VIS4ION system is an instrumented book-bag with high-resolution cameras, vision processing and haptic and audio feedback. The paper considers uploading the camera data to a mobile edge cloud to perform real-time object detection and transmitting the detection results back to the wearable. To determine the video requirements, the paper evaluates the impact of video bit rate and resolution on object detection accuracy and range. A new street scene dataset with labeled objects relevant to BVI navigation is leveraged for analysis. The vision evaluation is combined with a detailed full-stack wireless network simulation to determine the distribution of throughputs and delays with real navigation paths and ray-tracing from new high-resolution 3D models in an urban environment. For comparison, the wireless simulation considers both a standard 4G-Long Term Evolution (LTE) carrier and high-rate 5G millimeter-wave (mmWave) carrier. The work thus provides a thorough and realistic assessment of edge computing with mmWave connectivity in an application with both high bandwidth and low latency requirements.
△ Less
Submitted 15 April, 2022; v1 submitted 25 December, 2021;
originally announced December 2021.
-
The intrinsic (trap-free) transistors based on perovskite single crystals with self-passivated surfaces
Authors:
V. Bruevich,
L. Kasaei,
S. Rangan,
H. Hijazi,
Z. Zhang,
T. Emge,
E. Andrei,
R. A. Bartynski,
L. C. Feldman,
V. Podzorov
Abstract:
Lead-halide perovskites emerged as novel semiconducting materials suitable for a variety of optoelectronic applications. However, fabrication of reliable perovskite field-effect transistors (FETs), the devices necessary for the fundamental and applied research on charge transport properties of this class of materials, has proven challenging. Here we demonstrate high-performance perovskite FETs bas…
▽ More
Lead-halide perovskites emerged as novel semiconducting materials suitable for a variety of optoelectronic applications. However, fabrication of reliable perovskite field-effect transistors (FETs), the devices necessary for the fundamental and applied research on charge transport properties of this class of materials, has proven challenging. Here we demonstrate high-performance perovskite FETs based on epitaxial, single crystalline thin films of cesium lead bromide (CsPbBr3). An improved vapor-phase epitaxy has allowed growing truly large-area, atomically flat films of this perovskite with excellent structural and surface properties. FETs based on these CsPbBr3 films exhibit textbook transistor characteristics, with a very low hysteresis and high intrinsic charge carrier mobility. Availability of such high-performance devices has allowed the study of Hall effect in perovskite FETs for the first time. Our magneto-transport measurements show that the charge carrier mobility of CsPbBr3 FETs increases on cooling, from ~ 30 cm2V-1s-1 at room temperature, to ~ 250 cm2V-1s-1 at 50 K, exhibiting a band transport mostly limited by phonon scattering. The epitaxial growth and FET fabrication methodologies described here can be naturally extended to other perovskites, including the hybrid ones, thus representing a technological leap forward, overcoming the performance bottleneck in research on perovskite FETs.
△ Less
Submitted 24 December, 2021;
originally announced December 2021.
-
Millimeter Wave Wireless Assisted Robot Navigation with Link State Classification
Authors:
Mingsheng Yin,
Akshaj Veldanda,
Amee Trivedi,
Jeff Zhang,
Kai Pfeiffer,
Yaqi Hu,
Siddharth Garg,
Elza Erkip,
Ludovic Righetti,
Sundeep Rangan
Abstract:
The millimeter wave (mmWave) bands have attracted considerable attention for high precision localization applications due to the ability to capture high angular and temporal resolution measurements. This paper explores mmWave-based positioning for a target localization problem where a fixed target broadcasts mmWave signals and a mobile robotic agent attempts to capture the signals to locate and na…
▽ More
The millimeter wave (mmWave) bands have attracted considerable attention for high precision localization applications due to the ability to capture high angular and temporal resolution measurements. This paper explores mmWave-based positioning for a target localization problem where a fixed target broadcasts mmWave signals and a mobile robotic agent attempts to capture the signals to locate and navigate to the target. A three-stage procedure is proposed: First, the mobile agent uses tensor decomposition methods to detect the multipath channel components and estimate their parameters. Second, a machine-learning trained classifier is then used to predict the link state, meaning if the strongest path is line-of-sight (LOS) or non-LOS (NLOS). For the NLOS case, the link state predictor also determines if the strongest path arrived via one or more reflections. Third, based on the link state, the agent either follows the estimated angles or uses computer vision or other sensor to explore and map the environment. The method is demonstrated on a large dataset of indoor environments supplemented with ray tracing to simulate the wireless propagation. The path estimation and link state classification are also integrated into a state-of-the-art neural simultaneous localization and map** (SLAM) module to augment camera and LIDAR-based navigation. It is shown that the link state classifier can successfully generalize to completely new environments outside the training set. In addition, the neural-SLAM module with the wireless path estimation and link state classifier provides rapid navigation to the target, close to a baseline that knows the target location.
△ Less
Submitted 18 February, 2022; v1 submitted 27 October, 2021;
originally announced October 2021.
-
What Will the Future of UAV Cellular Communications Be? A Flight from 5G to 6G
Authors:
Giovanni Geraci,
Adrian Garcia-Rodriguez,
M. Mahdi Azari,
Angel Lozano,
Marco Mezzavilla,
Symeon Chatzinotas,
Yun Chen,
Sundeep Rangan,
Marco Di Renzo
Abstract:
What will the future of UAV cellular communications be? In this tutorial article, we address such a compelling yet difficult question by embarking on a journey from 5G to 6G and sharing a large number of realistic case studies supported by original results. We start by overviewing the status quo on UAV communications from an industrial standpoint, providing fresh updates from the 3GPP and detailin…
▽ More
What will the future of UAV cellular communications be? In this tutorial article, we address such a compelling yet difficult question by embarking on a journey from 5G to 6G and sharing a large number of realistic case studies supported by original results. We start by overviewing the status quo on UAV communications from an industrial standpoint, providing fresh updates from the 3GPP and detailing new 5G NR features in support of aerial devices. We then show the potential and the limitations of such features. In particular, we demonstrate how sub-6 GHz massive MIMO can successfully tackle cell selection and interference challenges, we showcase encouraging mmWave coverage evaluations in both urban and suburban/rural settings, and we examine the peculiarities of direct device-to-device communications in the sky. Moving on, we sneak a peek at next-generation UAV communications, listing some of the use cases envisioned for the 2030s. We identify the most promising 6G enablers for UAV communication, those expected to take the performance and reliability to the next level. For each of these disruptive new paradigms (non-terrestrial networks, cell-free architectures, artificial intelligence, reconfigurable intelligent surfaces, and THz communications), we gauge the prospective benefits for UAVs and discuss the main technological hurdles that stand in the way. All along, we distil our numerous findings into essential takeaways, and we identify key open problems worthy of further study.
△ Less
Submitted 11 May, 2021;
originally announced May 2021.
-
Millimeter-Wave UAV Coverage in Urban Environments
Authors:
Seongjoon Kang,
Marco Mezzavilla,
Angel Lozano,
Giovanni Geraci,
William Xia,
Sundeep Rangan,
Vasilii Semkin,
Giuseppe Loianno
Abstract:
With growing interest in mmWave connectivity for UAVs, a basic question is whether networks intended for terrestrial users can provide sufficient aerial coverage as well. To assess this possibility, the paper proposes a novel evaluation methodology using generative models trained on detailed ray tracing data. These models capture complex propagation characteristics and can be readily combined with…
▽ More
With growing interest in mmWave connectivity for UAVs, a basic question is whether networks intended for terrestrial users can provide sufficient aerial coverage as well. To assess this possibility, the paper proposes a novel evaluation methodology using generative models trained on detailed ray tracing data. These models capture complex propagation characteristics and can be readily combined with antenna and beamforming assumptions. Extensive simulation using these models indicate that standard (street-level and downtilted) base stations at typical microcellular densities can indeed provide satisfactory UAV coverage. Interestingly, the coverage is possible via a conjunction of antenna sidelobes and strong reflections. With sparser deployments, the coverage is only guaranteed at progressively higher altitudes. Additional dedicated (rooftop-mounted and uptilted) base stations strengthen the coverage provided that their density is comparable to that of the standard deployment, and would be instrumental for sparse deployments of the latter.
△ Less
Submitted 19 May, 2021; v1 submitted 5 April, 2021;
originally announced April 2021.
-
Lightweight UAV-based Measurement System for Air-to-Ground Channels at 28 GHz
Authors:
Vasilii Semkin,
Seongjoon Kang,
Jaakko Haarla,
William Xia,
Ismo Huhtinen,
Giovanni Geraci,
Angel Lozano,
Giuseppe Loianno,
Marco Mezzavilla,
Sundeep Rangan
Abstract:
Wireless communication at millimeter wave frequencies has attracted considerable attention for the delivery of high-bit-rate connectivity to unmanned aerial vehicles (UAVs). However, conducting the channel measurements necessary to assess communication at these frequencies has been challenging due to the severe payload and power restrictions in commercial UAVs. This work presents a novel lightweig…
▽ More
Wireless communication at millimeter wave frequencies has attracted considerable attention for the delivery of high-bit-rate connectivity to unmanned aerial vehicles (UAVs). However, conducting the channel measurements necessary to assess communication at these frequencies has been challenging due to the severe payload and power restrictions in commercial UAVs. This work presents a novel lightweight (approximately 1.3 kg) channel measurement system at 28 GHz installed on a commercially available UAV. A ground transmitter equipped with a horn antenna conveys sounding signals to a UAV equipped with a lightweight spectrum analyzer. We demonstrate that the measurements can be highly influenced by the antenna pattern as shaped by the UAV's frame. A calibration procedure is presented to correct for the resulting angular variations in antenna gain. The measurement setup is then validated on real flights from an airstrip at distances in excess of 300 m.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
Asymptotics of Ridge Regression in Convolutional Models
Authors:
Mojtaba Sahraee-Ardakan,
Tung Mai,
Anup Rao,
Ryan Rossi,
Sundeep Rangan,
Alyson K. Fletcher
Abstract:
Understanding generalization and estimation error of estimators for simple models such as linear and generalized linear models has attracted a lot of attention recently. This is in part due to an interesting observation made in machine learning community that highly over-parameterized neural networks achieve zero training error, and yet they are able to generalize well over the test samples. This…
▽ More
Understanding generalization and estimation error of estimators for simple models such as linear and generalized linear models has attracted a lot of attention recently. This is in part due to an interesting observation made in machine learning community that highly over-parameterized neural networks achieve zero training error, and yet they are able to generalize well over the test samples. This phenomenon is captured by the so called double descent curve, where the generalization error starts decreasing again after the interpolation threshold. A series of recent works tried to explain such phenomenon for simple models. In this work, we analyze the asymptotics of estimation error in ridge estimators for convolutional linear models. These convolutional inverse problems, also known as deconvolution, naturally arise in different fields such as seismology, imaging, and acoustics among others. Our results hold for a large class of input distributions that include i.i.d. features as a special case. We derive exact formulae for estimation error of ridge estimators that hold in a certain high-dimensional regime. We show the double descent phenomenon in our experiments for convolutional models and show that our theoretical results match the experiments.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
On Single-User Interactive Beam Alignment in Next Generation Systems: A Deep Learning Viewpoint
Authors:
Abbas Khalili,
Sundeep Rangan,
Elza Erkip
Abstract:
Communication in high frequencies such as millimeter wave and terahertz suffer from high path-loss and intense shadowing which necessitates beamforming for reliable data transmission. On the other hand, at high frequencies the channels are sparse and consist of few spatial clusters. Therefore, beam alignment (BA) strategies are used to find the direction of these channel clusters and adjust the wi…
▽ More
Communication in high frequencies such as millimeter wave and terahertz suffer from high path-loss and intense shadowing which necessitates beamforming for reliable data transmission. On the other hand, at high frequencies the channels are sparse and consist of few spatial clusters. Therefore, beam alignment (BA) strategies are used to find the direction of these channel clusters and adjust the width of the beam used for data transmission. In this work, a single-user uplink scenario where the channel has one dominant cluster is considered. It is assumed that the user transmits a set of BA packets over a fixed duration. Meanwhile, the base-station (BS) uses different probing beams to scan different angular regions. Since the BS measurements are noisy, it is not possible to find a narrow beam that includes the angle of arrival (AoA) of the user with probability one. Therefore, the BS allocates a narrow beam to the user which includes the AoA of the user with a predetermined error probability while minimizing the expected beamwidth of the allocated beam. Due to intractability of this noisy BA problem, here this problem is posed as an end-to-end optimization of a deep neural network (DNN) and effects of different loss functions are discussed and investigated. It is observed that the proposed DNN based BA, at high SNRs, achieves a performance close to that of the optimal BA when there is no-noise and for all SNRs, outperforms state-of-the-art.
△ Less
Submitted 19 February, 2021;
originally announced February 2021.
-
Implicit Bias of Linear RNNs
Authors:
Melikasadat Emami,
Mojtaba Sahraee-Ardakan,
Parthe Pandit,
Sundeep Rangan,
Alyson K. Fletcher
Abstract:
Contemporary wisdom based on empirical studies suggests that standard recurrent neural networks (RNNs) do not perform well on tasks requiring long-term memory. However, precise reasoning for this behavior is still unknown. This paper provides a rigorous explanation of this property in the special case of linear RNNs. Although this work is limited to linear RNNs, even these systems have traditional…
▽ More
Contemporary wisdom based on empirical studies suggests that standard recurrent neural networks (RNNs) do not perform well on tasks requiring long-term memory. However, precise reasoning for this behavior is still unknown. This paper provides a rigorous explanation of this property in the special case of linear RNNs. Although this work is limited to linear RNNs, even these systems have traditionally been difficult to analyze due to their non-linear parameterization. Using recently-developed kernel regime analysis, our main result shows that linear RNNs learned from random initializations are functionally equivalent to a certain weighted 1D-convolutional network. Importantly, the weightings in the equivalent model cause an implicit bias to elements with smaller time lags in the convolution and hence, shorter memory. The degree of this bias depends on the variance of the transition kernel matrix at initialization and is related to the classic exploding and vanishing gradients problem. The theory is validated in both synthetic and real data experiments.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
Generative Neural Network Channel Modeling for Millimeter-Wave UAV Communication
Authors:
William Xia,
Sundeep Rangan,
Marco Mezzavillla,
Angel Lozano,
Giovanni Geraci,
Vasilii Semkin,
Giuseppe Loianno
Abstract:
The millimeter wave bands are being increasingly considered for wireless communication to unmanned aerial vehicles (UAVs). Critical to this undertaking are statistical channel models that describe the distribution of constituent parameters in scenarios of interest. This paper presents a general modeling methodology based on data-training a generative neural network. The proposed generative model h…
▽ More
The millimeter wave bands are being increasingly considered for wireless communication to unmanned aerial vehicles (UAVs). Critical to this undertaking are statistical channel models that describe the distribution of constituent parameters in scenarios of interest. This paper presents a general modeling methodology based on data-training a generative neural network. The proposed generative model has a two-stage structure that first predicts the link state (line-of-sight, non-line-of-sight, or outage), and subsequently feeds this state into a conditional variational autoencoder (VAE) that generates the path losses, delays, and angles of arrival and departure for all the propagation paths. The methodology is demonstrated for 28 GHz air-to-ground channels between UAVs and a cellular system in representative urban environments, with training datasets produced through ray tracing. The demonstration extends to both standard base stations (installed at street level and downtilted) as well as dedicated base stations (mounted on rooftops and uptilted). The proposed approach is able to capture complex statistical relations in the data and it significantly outperforms standard 3GPP models, even after refitting the parameters of those models to the data.
△ Less
Submitted 26 August, 2021; v1 submitted 16 December, 2020;
originally announced December 2020.
-
Millimeter Wave Channel Modeling via Generative Neural Networks
Authors:
William Xia,
Sundeep Rangan,
Marco Mezzavilla,
Angel Lozano,
Giovanni Geraci,
Vasilii Semkin,
Giuseppe Loianno
Abstract:
Statistical channel models are instrumental to design and evaluate wireless communication systems. In the millimeter wave bands, such models become acutely challenging; they must capture the delay, directions, and path gains, for each link and with high resolution. This paper presents a general modeling methodology based on training generative neural networks from data. The proposed generative mod…
▽ More
Statistical channel models are instrumental to design and evaluate wireless communication systems. In the millimeter wave bands, such models become acutely challenging; they must capture the delay, directions, and path gains, for each link and with high resolution. This paper presents a general modeling methodology based on training generative neural networks from data. The proposed generative model consists of a two-stage structure that first predicts the state of each link (line-of-sight, non-line-of-sight, or outage), and subsequently feeds this state into a conditional variational autoencoder that generates the path losses, delays, and angles of arrival and departure for all its propagation paths. Importantly, minimal prior assumptions are made, enabling the model to capture complex relationships within the data. The methodology is demonstrated for 28GHz air-to-ground channels in an urban environment, with training datasets produced by means of ray tracing.
△ Less
Submitted 25 August, 2020;
originally announced August 2020.
-
Enabling Remote Whole-Body Control with 5G Edge Computing
Authors:
Huaijiang Zhu,
Manali Sharma,
Kai Pfeiffer,
Marco Mezzavilla,
Jia Shen,
Sundeep Rangan,
Ludovic Righetti
Abstract:
Real-world applications require light-weight, energy-efficient, fully autonomous robots. Yet, increasing autonomy is oftentimes synonymous with escalating computational requirements. It might thus be desirable to offload intensive computation--not only sensing and planning, but also low-level whole-body control--to remote servers in order to reduce on-board computational needs. Fifth Generation (5…
▽ More
Real-world applications require light-weight, energy-efficient, fully autonomous robots. Yet, increasing autonomy is oftentimes synonymous with escalating computational requirements. It might thus be desirable to offload intensive computation--not only sensing and planning, but also low-level whole-body control--to remote servers in order to reduce on-board computational needs. Fifth Generation (5G) wireless cellular technology, with its low latency and high bandwidth capabilities, has the potential to unlock cloud-based high performance control of complex robots. However, state-of-the-art control algorithms for legged robots can only tolerate very low control delays, which even ultra-low latency 5G edge computing can sometimes fail to achieve. In this work, we investigate the problem of cloud-based whole-body control of legged robots over a 5G link. We propose a novel approach that consists of a standard optimization-based controller on the network edge and a local linear, approximately optimal controller that significantly reduces on-board computational needs while increasing robustness to delay and possible loss of communication. Simulation experiments on humanoid balancing and walking tasks that includes a realistic 5G communication model demonstrate significant improvement of the reliability of robot locomotion under jitter and delays likely to experienced in 5G wireless links.
△ Less
Submitted 18 August, 2020;
originally announced August 2020.
-
Millimeter Wave Remove UAV Control and Communications for Public Safety Scenarios
Authors:
William Xia,
Michele Polese,
Marco Mezzavilla,
Giuseppe Loianno,
Sundeep Rangan,
Michele Zorzi
Abstract:
Communication and video capture from unmanned aerial vehicles (UAVs) offer significant potential for assisting first responders in remote public safety settings. In such uses, millimeter wave (mmWave) wireless links can provide high throughput and low latency connectivity between the UAV and a remote command center. However, maintaining reliable aerial communication in the mmWave bands is challeng…
▽ More
Communication and video capture from unmanned aerial vehicles (UAVs) offer significant potential for assisting first responders in remote public safety settings. In such uses, millimeter wave (mmWave) wireless links can provide high throughput and low latency connectivity between the UAV and a remote command center. However, maintaining reliable aerial communication in the mmWave bands is challenging due to the need to support high speed beam tracking and overcome blockage. This paper provides a simulation study aimed at assessing the feasibility of public safety UAV connectivity through a 5G link at 28 GHz. Real flight motion traces are captured during maneuvers similar to those expected in public safety settings. The motions traces are then incorporated into a detailed mmWave network simulator that models the channel, blockage, beamforming and full 3GPP protocol stack. We show that 5G mmWave communications can deliver throughput up to 1 Gbps with consistent sub ms latency when the base station is located near the mission area, enabling remote offloading of the UAV control and perception algorithms.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Low-Rank Nonlinear Decoding of $μ$-ECoG from the Primary Auditory Cortex
Authors:
Melikasadat Emami,
Mojtaba Sahraee-Ardakan,
Parthe Pandit,
Alyson K. Fletcher,
Sundeep Rangan,
Michael Trumpis,
Brinnae Bent,
Chia-Han Chiang,
Jonathan Viventi
Abstract:
This paper considers the problem of neural decoding from parallel neural measurements systems such as micro-electrocorticography ($μ$-ECoG). In systems with large numbers of array elements at very high sampling rates, the dimension of the raw measurement data may be large. Learning neural decoders for this high-dimensional data can be challenging, particularly when the number of training samples i…
▽ More
This paper considers the problem of neural decoding from parallel neural measurements systems such as micro-electrocorticography ($μ$-ECoG). In systems with large numbers of array elements at very high sampling rates, the dimension of the raw measurement data may be large. Learning neural decoders for this high-dimensional data can be challenging, particularly when the number of training samples is limited. To address this challenge, this work presents a novel neural network decoder with a low-rank structure in the first hidden layer. The low-rank constraints dramatically reduce the number of parameters in the decoder while still enabling a rich class of nonlinear decoder maps. The low-rank decoder is illustrated on $μ$-ECoG data from the primary auditory cortex (A1) of awake rats. This decoding problem is particularly challenging due to the complexity of neural responses in the auditory cortex and the presence of confounding signals in awake animals. It is shown that the proposed low-rank decoder significantly outperforms models using standard dimensionality reduction techniques such as principal component analysis (PCA).
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
Generalization Error of Generalized Linear Models in High Dimensions
Authors:
Melikasadat Emami,
Mojtaba Sahraee-Ardakan,
Parthe Pandit,
Sundeep Rangan,
Alyson K. Fletcher
Abstract:
At the heart of machine learning lies the question of generalizability of learned rules over previously unseen data. While over-parameterized models based on neural networks are now ubiquitous in machine learning applications, our understanding of their generalization capabilities is incomplete. This task is made harder by the non-convexity of the underlying learning problems. We provide a general…
▽ More
At the heart of machine learning lies the question of generalizability of learned rules over previously unseen data. While over-parameterized models based on neural networks are now ubiquitous in machine learning applications, our understanding of their generalization capabilities is incomplete. This task is made harder by the non-convexity of the underlying learning problems. We provide a general framework to characterize the asymptotic generalization error for single-layer neural networks (i.e., generalized linear models) with arbitrary non-linearities, making it applicable to regression as well as classification problems. This framework enables analyzing the effect of (i) over-parameterization and non-linearity during modeling; and (ii) choices of loss function, initialization, and regularizer during learning. Our model also captures mismatch between training and test distributions. As examples, we analyze a few special cases, namely linear regression and logistic regression. We are also able to rigorously and analytically explain the \emph{double descent} phenomenon in generalized linear models.
△ Less
Submitted 30 April, 2020;
originally announced May 2020.
-
Beamformed mmWave System Propagation at 60GHz in an Office Environment
Authors:
Syed Hashim Ali Shah,
Sarankumar Balakrishnan,
Liangxiao Xin,
Mohamed Abouelseoud,
Kazuyuki Sakoda,
Ken Tanaka,
Christopher Slezak,
Sundeep Rangan,
Shivendra Panwar
Abstract:
Millimeter wave wireless systems rely heavily on directional communication in narrow steerable beams. Tools to measure the spatial and temporal nature of the channel are necessary to evaluate beamforming and related algorithms. This paper presents a novel 60~GHz phased-array based directional channel sounder and data analysis procedure that can accurately extract paths and their transmit and recei…
▽ More
Millimeter wave wireless systems rely heavily on directional communication in narrow steerable beams. Tools to measure the spatial and temporal nature of the channel are necessary to evaluate beamforming and related algorithms. This paper presents a novel 60~GHz phased-array based directional channel sounder and data analysis procedure that can accurately extract paths and their transmit and receive directions. The gains along each path can also be measured for analyzing blocking scenarios. The sounder is validated in an indoor office environment.
△ Less
Submitted 28 March, 2020;
originally announced March 2020.
-
Inference in Multi-Layer Networks with Matrix-Valued Unknowns
Authors:
Parthe Pandit,
Mojtaba Sahraee-Ardakan,
Sundeep Rangan,
Philip Schniter,
Alyson K. Fletcher
Abstract:
We consider the problem of inferring the input and hidden variables of a stochastic multi-layer neural network from an observation of the output. The hidden variables in each layer are represented as matrices. This problem applies to signal recovery via deep generative prior models, multi-task and mixed regression and learning certain classes of two-layer neural networks. A unified approximation a…
▽ More
We consider the problem of inferring the input and hidden variables of a stochastic multi-layer neural network from an observation of the output. The hidden variables in each layer are represented as matrices. This problem applies to signal recovery via deep generative prior models, multi-task and mixed regression and learning certain classes of two-layer neural networks. A unified approximation algorithm for both MAP and MMSE inference is proposed by extending a recently-developed Multi-Layer Vector Approximate Message Passing (ML-VAMP) algorithm to handle matrix-valued unknowns. It is shown that the performance of the proposed Multi-Layer Matrix VAMP (ML-Mat-VAMP) algorithm can be exactly predicted in a certain random large-system limit, where the dimensions $N\times d$ of the unknown quantities grow as $N\rightarrow\infty$ with $d$ fixed. In the two-layer neural-network learning problem, this scaling corresponds to the case where the number of input features and training samples grow to infinity but the number of hidden nodes stays fixed. The analysis enables a precise prediction of the parameter and test error of the learning.
△ Less
Submitted 25 January, 2020;
originally announced January 2020.
-
Capacity Bounds for Communication Systems with Quantization and Spectral Constraints
Authors:
Sourjya Dutta,
Abbas Khalili,
Elza Erkip,
Sundeep Rangan
Abstract:
Low-resolution digital-to-analog and analog-to-digital converters (DACs and ADCs) have attracted considerable attention in efforts to reduce power consumption in millimeter wave (mmWave) and massive MIMO systems. This paper presents an information-theoretic analysis with capacity bounds for classes of linear transceivers with quantization. The transmitter modulates symbols via a unitary transform…
▽ More
Low-resolution digital-to-analog and analog-to-digital converters (DACs and ADCs) have attracted considerable attention in efforts to reduce power consumption in millimeter wave (mmWave) and massive MIMO systems. This paper presents an information-theoretic analysis with capacity bounds for classes of linear transceivers with quantization. The transmitter modulates symbols via a unitary transform followed by a DAC and the receiver employs an ADC followed by the inverse unitary transform. If the unitary transform is set to an FFT matrix, the model naturally captures filtering and spectral constraints which are essential to model in any practical transceiver. In particular, this model allows studying the impact of quantization on out-of-band emission constraints. In the limit of a large random unitary transform, it is shown that the effect of quantization can be precisely described via an additive Gaussian noise model. This model in turn leads to simple and intuitive expressions for the power spectrum of the transmitted signal and a lower bound to the capacity with quantization. Comparison with non-quantized capacity and a capacity upper bound that does not make linearity assumptions suggests that while low resolution quantization has minimal impact on the achievable rate at typical parameters in 5G systems today, satisfying out-of-band emissions are potentially much more of a challenge.
△ Less
Submitted 2 August, 2020; v1 submitted 12 January, 2020;
originally announced January 2020.
-
Energy and Latency of Beamforming Architectures for Initial Access in mmWave Wireless Networks
Authors:
C. Nicolas Barati,
Sourjya Dutta,
Sundeep Rangan,
Ashutosh Sabharwal
Abstract:
Future millimeter-wave (mmWave) systems, 5G cellular or WiFi, must rely on highly directional links to overcome severe pathloss in these frequency bands. Establishing such links requires the mutual discovery of the transmitter and the receiver %in the angular domain potentially leading to a large latency and high energy consumption. In this work, we show that both the discovery latency and energy…
▽ More
Future millimeter-wave (mmWave) systems, 5G cellular or WiFi, must rely on highly directional links to overcome severe pathloss in these frequency bands. Establishing such links requires the mutual discovery of the transmitter and the receiver %in the angular domain potentially leading to a large latency and high energy consumption. In this work, we show that both the discovery latency and energy consumption can be significantly reduced by using fully digital front-ends. In fact, we establish that by reducing the resolution of the fully-digital front-ends we can achieve lower energy consumption compared to both analog and high-resolution digital beamformers. Since beamforming through analog front-ends allows sampling in only one direction at a time, the mobile device is ''on'' for a longer time compared to a digital beamformer which can get spatial samples from all directions in one shot. We show that the energy consumed by the analog front-end can be four to six times more than that of the digital front-ends, depending on the size of the employed antenna arrays. We recognize, however, that using fully digital beamforming post beam discovery, i.e., for data transmission, is not viable from a power consumption standpoint. To address this issue, we propose the use of digital beamformers with low-resolution analog to digital converters (4 bits). This reduction in resolution brings the power consumption to the same level as analog beamforming for data transmissions while benefiting from the spatial multiplexing capabilities of fully digital beamforming, thus reducing initial discovery latency and improving energy efficiency.
△ Less
Submitted 7 January, 2020;
originally announced January 2020.
-
Inference with Deep Generative Priors in High Dimensions
Authors:
Parthe Pandit,
Mojtaba Sahraee-Ardakan,
Sundeep Rangan,
Philip Schniter,
Alyson K. Fletcher
Abstract:
Deep generative priors offer powerful models for complex-structured data, such as images, audio, and text. Using these priors in inverse problems typically requires estimating the input and/or hidden signals in a multi-layer deep neural network from observation of its output. While these approaches have been successful in practice, rigorous performance analysis is complicated by the non-convex nat…
▽ More
Deep generative priors offer powerful models for complex-structured data, such as images, audio, and text. Using these priors in inverse problems typically requires estimating the input and/or hidden signals in a multi-layer deep neural network from observation of its output. While these approaches have been successful in practice, rigorous performance analysis is complicated by the non-convex nature of the underlying optimization problems. This paper presents a novel algorithm, Multi-Layer Vector Approximate Message Passing (ML-VAMP), for inference in multi-layer stochastic neural networks. ML-VAMP can be configured to compute maximum a priori (MAP) or approximate minimum mean-squared error (MMSE) estimates for these networks. We show that the performance of ML-VAMP can be exactly predicted in a certain high-dimensional random limit. Furthermore, under certain conditions, ML-VAMP yields estimates that achieve the minimum (i.e., Bayes-optimal) MSE as predicted by the replica method. In this way, ML-VAMP provides a computationally efficient method for multi-layer inference with an exact performance characterization and testable conditions for optimality in the large-system limit.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Input-Output Equivalence of Unitary and Contractive RNNs
Authors:
M. Emami,
M. Sahraee-Ardakan,
S. Rangan,
A. K. Fletcher
Abstract:
Unitary recurrent neural networks (URNNs) have been proposed as a method to overcome the vanishing and exploding gradient problem in modeling data with long-term dependencies. A basic question is how restrictive is the unitary constraint on the possible input-output map**s of such a network? This work shows that for any contractive RNN with ReLU activations, there is a URNN with at most twice th…
▽ More
Unitary recurrent neural networks (URNNs) have been proposed as a method to overcome the vanishing and exploding gradient problem in modeling data with long-term dependencies. A basic question is how restrictive is the unitary constraint on the possible input-output map**s of such a network? This work shows that for any contractive RNN with ReLU activations, there is a URNN with at most twice the number of hidden states and the identical input-output map**. Hence, with ReLU activations, URNNs are as expressive as general RNNs. In contrast, for certain smooth activations, it is shown that the input-output map** of an RNN cannot be matched with a URNN, even with an arbitrary number of states. The theoretical results are supported by experiments on modeling of slowly-varying dynamical systems.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Power Efficient Discontinuous Reception in THz and mmWave Wireless Systems
Authors:
Syed Hashim Ali Shah,
Sundar Aditya,
Sourjya Dutta,
Christopher Slezak,
Sundeep Rangan
Abstract:
Discontinuous reception (DRX), where a user equip-ment (UE) temporarily disables its receiver, is a critical power saving feature in modern cellular systems. DRX is likely tobe particularly aggressively used in the mmWave and THzfrequencies due to the high front end power consumption. A keychallenge of DRX in these frequencies is that individual links are directional and highly susceptible to bloc…
▽ More
Discontinuous reception (DRX), where a user equip-ment (UE) temporarily disables its receiver, is a critical power saving feature in modern cellular systems. DRX is likely tobe particularly aggressively used in the mmWave and THzfrequencies due to the high front end power consumption. A keychallenge of DRX in these frequencies is that individual links are directional and highly susceptible to blockage. MmWave and THz UEs will therefore likely need to monitor multiple cells in multiple directions to ensure continuous reliable connectivity.This work proposes a novel, heuristic algorithm to dynamically select the cells to monitor to attempt to optimally trade-off link reliability and power consumption. The paper provides preliminary estimates of connected mode DRX mode consumption using detailed and realistic statistical models of blockers at both 28 and 140 GHz. It is found that although blockage dynamics are faster at 140 GHz, reliable connectivity at low power can be maintained with sufficient macro-diversity and link prediction
△ Less
Submitted 23 August, 2019;
originally announced August 2019.
-
Towards 6G Networks: Use Cases and Technologies
Authors:
Marco Giordani,
Michele Polese,
Marco Mezzavilla,
Sundeep Rangan,
Michele Zorzi
Abstract:
Reliable data connectivity is vital for the ever increasingly intelligent, automated and ubiquitous digital world. Mobile networks are the data highways and, in a fully connected, intelligent digital world, will need to connect everything, from people to vehicles, sensors, data, cloud resources and even robotic agents. Fifth generation (5G) wireless networks (that are being currently deployed) off…
▽ More
Reliable data connectivity is vital for the ever increasingly intelligent, automated and ubiquitous digital world. Mobile networks are the data highways and, in a fully connected, intelligent digital world, will need to connect everything, from people to vehicles, sensors, data, cloud resources and even robotic agents. Fifth generation (5G) wireless networks (that are being currently deployed) offer significant advances beyond LTE, but may be unable to meet the full connectivity demands of the future digital society. Therefore, this article discusses technologies that will evolve wireless networks towards a sixth generation (6G), and that we consider as enablers for several potential 6G use cases. We provide a full-stack, system-level perspective on 6G scenarios and requirements, and select 6G technologies that can satisfy them either by improving the 5G design, or by introducing completely new communication paradigms.
△ Less
Submitted 4 February, 2020; v1 submitted 28 March, 2019;
originally announced March 2019.