-
Data Needs and Challenges of Quantum Dot Devices Automation: Workshop Report
Authors:
Justyna P. Zwolak,
Jacob M. Taylor,
Reed Andrews,
Jared Benson,
Garnett Bryant,
Donovan Buterakos,
Anasua Chatterjee,
Sankar Das Sarma,
Mark A. Eriksson,
Eliška Greplová,
Michael J. Gullans,
Fabian Hader,
Tyler J. Kovach,
Pranav S. Mundada,
Mick Ramsey,
Torbjoern Rasmussen,
Brandon Severin,
Anthony Sigillito,
Brennan Undseth,
Brian Weber
Abstract:
Gate-defined quantum dots are a promising candidate system to realize scalable, coupled qubit systems and serve as a fundamental building block for quantum computers. However, present-day quantum dot devices suffer from imperfections that must be accounted for, which hinders the characterization, tuning, and operation process. Moreover, with an increasing number of quantum dot qubits, the relevant…
▽ More
Gate-defined quantum dots are a promising candidate system to realize scalable, coupled qubit systems and serve as a fundamental building block for quantum computers. However, present-day quantum dot devices suffer from imperfections that must be accounted for, which hinders the characterization, tuning, and operation process. Moreover, with an increasing number of quantum dot qubits, the relevant parameter space grows sufficiently to make heuristic control infeasible. Thus, it is imperative that reliable and scalable autonomous tuning approaches are developed. In this report, we outline current challenges in automating quantum dot device tuning and operation with a particular focus on datasets, benchmarking, and standardization. We also present ideas put forward by the quantum dot community on how to overcome them.
△ Less
Submitted 12 May, 2024; v1 submitted 21 December, 2023;
originally announced December 2023.
-
Probing single electrons across 300 mm spin qubit wafers
Authors:
Samuel Neyens,
Otto K. Zietz,
Thomas F. Watson,
Florian Luthi,
Aditi Nethwewala,
Hubert C. George,
Eric Henry,
Mohammad Islam,
Andrew J. Wagner,
Felix Borjans,
Elliot J. Connors,
J. Corrigan,
Matthew J. Curry,
Daniel Keith,
Roza Kotlyar,
Lester F. Lampert,
Mateusz T. Madzik,
Kent Millard,
Fahd A. Mohiyaddin,
Stefano Pellerano,
Ravi Pillarisetty,
Mick Ramsey,
Rostyslav Savytskyy,
Simon Schaal,
Guoji Zheng
, et al. (5 additional authors not shown)
Abstract:
Building a fault-tolerant quantum computer will require vast numbers of physical qubits. For qubit technologies based on solid state electronic devices, integrating millions of qubits in a single processor will require device fabrication to reach a scale comparable to that of the modern CMOS industry. Equally importantly, the scale of cryogenic device testing must keep pace to enable efficient dev…
▽ More
Building a fault-tolerant quantum computer will require vast numbers of physical qubits. For qubit technologies based on solid state electronic devices, integrating millions of qubits in a single processor will require device fabrication to reach a scale comparable to that of the modern CMOS industry. Equally importantly, the scale of cryogenic device testing must keep pace to enable efficient device screening and to improve statistical metrics like qubit yield and voltage variation. Spin qubits based on electrons in Si have shown impressive control fidelities but have historically been challenged by yield and process variation. Here we present a testing process using a cryogenic 300 mm wafer prober to collect high-volume data on the performance of hundreds of industry-manufactured spin qubit devices at 1.6 K. This testing method provides fast feedback to enable optimization of the CMOS-compatible fabrication process, leading to high yield and low process variation. Using this system, we automate measurements of the operating point of spin qubits and probe the transitions of single electrons across full wafers. We analyze the random variation in single-electron operating voltages and find that the optimized fabrication process leads to low levels of disorder at the 300 mm scale. Together these results demonstrate the advances that can be achieved through the application of CMOS industry techniques to the fabrication and measurement of spin qubit devices.
△ Less
Submitted 3 May, 2024; v1 submitted 10 July, 2023;
originally announced July 2023.
-
Is Our Organization Actually Measuring Productivity? How Contrasting Organizational and Individual Measures of Engineering Success is an Opportunity to Drive Engineering Transformation
Authors:
Carol S. Lee,
Morgan Ramsey,
Catherine M. Hicks
Abstract:
Background: Previous research highlights that common misconceptions about developer productivity lead to harmful and inaccurate evaluations of software work, pointing to the need for organizations to differentiate between measures of production, productivity, and performance as an important step that helps to suggest improvements to how we measure the success of engineering teams. Methodology: Usi…
▽ More
Background: Previous research highlights that common misconceptions about developer productivity lead to harmful and inaccurate evaluations of software work, pointing to the need for organizations to differentiate between measures of production, productivity, and performance as an important step that helps to suggest improvements to how we measure the success of engineering teams. Methodology: Using a card sort, we explored how a Three Layer Productivity Framework was used by 16 software engineers at a Software Engineering focused conference to rank measures of success, first in the current practice of their organization and second in their individual beliefs about the best ways to measure engineering success. Results and discussion: Overall, participants preferred organizations to 1) continue their prioritized focus on performance layer metrics, 2) increase the focus on productivity metrics, and 3) decrease their focus on production metrics. When asked about the current metrics of their organizations, while all roles reported a current focus on performance metrics, only ICs reported a strong focus on production metrics. When asked about metrics they would prefer, all roles preferred more performance metrics but only leaders and ICs also wanted productivity metrics. While all participants were aligned on performance metrics being a top preference, there was misalignment on which specific metrics are used. Our findings show that when measuring developer success, organizations should continue measurement using performance metrics, consider an increased focus on productivity metrics, and consider a decreased focus on production metrics.
△ Less
Submitted 23 May, 2023; v1 submitted 18 May, 2023;
originally announced May 2023.
-
Automated extraction of capacitive coupling for quantum dot systems
Authors:
Joshua Ziegler,
Florian Luthi,
Mick Ramsey,
Felix Borjans,
Guoji Zheng,
Justyna P. Zwolak
Abstract:
Gate-defined quantum dots (QDs) have appealing attributes as a quantum computing platform. However, near-term devices possess a range of possible imperfections that need to be accounted for during the tuning and operation of QD devices. One such problem is the capacitive cross-talk between the metallic gates that define and control QD qubits. A way to compensate for the capacitive cross-talk and e…
▽ More
Gate-defined quantum dots (QDs) have appealing attributes as a quantum computing platform. However, near-term devices possess a range of possible imperfections that need to be accounted for during the tuning and operation of QD devices. One such problem is the capacitive cross-talk between the metallic gates that define and control QD qubits. A way to compensate for the capacitive cross-talk and enable targeted control of specific QDs independent of coupling is by the use of virtual gates. Here, we demonstrate a reliable automated capacitive coupling identification method that combines machine learning with traditional fitting to take advantage of the desirable properties of each. We also show how the cross-capacitance measurement may be used for the identification of spurious QDs sometimes formed during tuning experimental devices. Our systems can autonomously flag devices with spurious dots near the operating regime, which is crucial information for reliable tuning to a regime suitable for qubit operations.
△ Less
Submitted 25 May, 2023; v1 submitted 20 January, 2023;
originally announced January 2023.
-
Benchmarking theoretical electronic structure methods with photoemission orbital tomography
Authors:
Anja Haags,
Xiaosheng Yang,
Larissa Egger,
Dominik Brandstetter,
Hans Kirschner,
Alexander Gottwald,
Mathias Richter,
Georg Koller,
Michael G. Ramsey,
François C. Bocquet,
Serguei Soubatch,
F. Stefan Tautz,
Peter Puschnig
Abstract:
In the past decade, photoemission orbital tomography (POT) has evolved into a powerful tool to investigate the electronic structure of organic molecules adsorbed on (metallic) surfaces. By measuring the angular distribution of photoelectrons as a function of binding energy and making use of the momentum-space signature of molecular orbitals, POT leads to an orbital-resolved picture of the electron…
▽ More
In the past decade, photoemission orbital tomography (POT) has evolved into a powerful tool to investigate the electronic structure of organic molecules adsorbed on (metallic) surfaces. By measuring the angular distribution of photoelectrons as a function of binding energy and making use of the momentum-space signature of molecular orbitals, POT leads to an orbital-resolved picture of the electronic density of states at the organic/metal interface. In this combined experimental and theoretical work, we apply POT to the prototypical organic $π$-conjugated molecule bisanthene (C$_{28}$H$_{14}$) which forms a highly oriented monolayer on a Cu(110) surface. Experimentally, we identify an unprecedented number of 13 $π$ and 12 $σ$ orbitals of bisanthene and measure their respective binding energies and spectral lineshapes at the bisanthene/Cu(110) interface. Theoretically, we perform density functional calculations for this interface employing four widely used exchange-correlation functionals from the families of the generalized gradient approximations as well as global and range-separated hybrid functionals. By analyzing the electronic structure in terms of orbital-projected density of states, we arrive at a detailed orbital-by-orbital assessment of theory vs. experiment. This allows us to benchmark the performance of the investigated functionals with regards to their capability of accounting for the orbital energy alignment at organic/metal interfaces.
△ Less
Submitted 27 September, 2022; v1 submitted 23 September, 2022;
originally announced September 2022.
-
Tuning arrays with rays: Physics-informed tuning of quantum dot charge states
Authors:
Joshua Ziegler,
Florian Luthi,
Mick Ramsey,
Felix Borjans,
Guoji Zheng,
Justyna P. Zwolak
Abstract:
Quantum computers based on gate-defined quantum dots (QDs) are expected to scale. However, as the number of qubits increases, the burden of manually calibrating these systems becomes unreasonable and autonomous tuning must be used. There has been a range of recent demonstrations of automated tuning of various QD parameters such as coarse gate ranges, global state topology (e.g. single QD, double Q…
▽ More
Quantum computers based on gate-defined quantum dots (QDs) are expected to scale. However, as the number of qubits increases, the burden of manually calibrating these systems becomes unreasonable and autonomous tuning must be used. There has been a range of recent demonstrations of automated tuning of various QD parameters such as coarse gate ranges, global state topology (e.g. single QD, double QD), charge, and tunnel coupling with a variety of methods. Here, we demonstrate an intuitive, reliable, and data-efficient set of tools for an automated global state and charge tuning in a framework deemed physics-informed tuning (PIT). The first module of PIT is an action-based algorithm that combines a machine learning classifier with physics knowledge to navigate to a target global state. The second module uses a series of one-dimensional measurements to tune to a target charge state by first emptying the QDs of charge, followed by calibrating capacitive couplings and navigating to the target charge state. The success rate for the action-based tuning consistently surpasses 95 % on both simulated and experimental data suitable for off-line testing. The success rate for charge setting is comparable when testing with simulated data, at 95.5(5.4) %, and only slightly worse for off-line experimental tests, with an average of 89.7(17.4) % (median 97.5 %). It is noteworthy that the high performance is demonstrated both on data from samples fabricated in an academic cleanroom as well as on an industrial 300 mm} process line, further underlining the device agnosticism of PIT. Together, these tests on a range of simulated and experimental devices demonstrate the effectiveness and robustness of PIT.
△ Less
Submitted 28 September, 2023; v1 submitted 8 September, 2022;
originally announced September 2022.
-
Momentum-space imaging of σ-orbitals for chemical analysis
Authors:
Anja Haags,
Xiaosheng Yang,
Larissa Egger,
Dominik Brandstetter,
Hans Kirschner,
François C. Bocquet,
Georg Koller,
Alexander Gottwald,
Mathias Richter,
J. Michael Gottfried,
Michael G. Ramsey,
Peter Puschnig,
Serguei Soubatch,
F. Stefan Tautz
Abstract:
Tracing the modifications of molecules in surface chemical reactions benefits from the possibility to image their orbitals. While delocalized frontier orbitals with π-character are imaged routinely with photoemission orbital tomography, they are not always sensitive to local chemical modifications, particularly the making and breaking of bonds at the molecular periphery. For such bonds, σ-orbitals…
▽ More
Tracing the modifications of molecules in surface chemical reactions benefits from the possibility to image their orbitals. While delocalized frontier orbitals with π-character are imaged routinely with photoemission orbital tomography, they are not always sensitive to local chemical modifications, particularly the making and breaking of bonds at the molecular periphery. For such bonds, σ-orbitals would be far more revealing. Here, we show that these orbitals can indeed be imaged in a remarkably broad energy range, and that the plane wave approximation, an important ingredient of photoemission orbital tomography, is also well fulfilled for these orbitals. This makes photoemission orbital tomography a unique tool for the detailed analysis of surface chemical reactions. We demonstrate this by identifying the reaction product of a dehalogenation and cyclodehydrogenation reaction.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Revealing the Buried Metal-Organic Interface: Restructuring of the First Layer by van der Waals Forces
Authors:
Margareta Wagner,
Stephen Berkebile,
Falko P. Netzer,
Michael G. Ramsey
Abstract:
Using molecular manipulation in a cryogenic scanning tunneling microscope, the structure and rearrangement of sexiphenyl molecules at the buried interface of the organic film with the Cu(110) substrate surface have been revealed. It is shown that a reconstruction of the first monolayer of flat lying molecules occurs due to the van der Waals pressure from subsequent layers. In this rearrangement, a…
▽ More
Using molecular manipulation in a cryogenic scanning tunneling microscope, the structure and rearrangement of sexiphenyl molecules at the buried interface of the organic film with the Cu(110) substrate surface have been revealed. It is shown that a reconstruction of the first monolayer of flat lying molecules occurs due to the van der Waals pressure from subsequent layers. In this rearrangement, additional sexiphenyl molecules are forced into the established complete monolayer and adopt an edge-on configuration. Incorporation of second layer molecules into the first layer is also demonstrated by purposely pushing sexiphenyl molecules with the STM tip. The results indicate that even chemisorbed organic layers at interfaces can be significantly influenced by external stress from van der Waals forces of subsequent layers.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.
-
Adventures with Micro- and Nanofabricated Devices for Chemical and Biochemical Measurements; Early Days to Present!
Authors:
J. Michael Ramsey
Abstract:
J. Michael Ramsey holds the Minnie N. Goldby Distinguished Professor of Chemistry Chair at the University of North Carolina - Chapel Hill. Here he describes the development of micro- and nanofabricated devices in his lab from the early developments that lead into the commercialization of the first active control microfluidic device by Caliper Technologies and the follow-on micro- and nanoscale dev…
▽ More
J. Michael Ramsey holds the Minnie N. Goldby Distinguished Professor of Chemistry Chair at the University of North Carolina - Chapel Hill. Here he describes the development of micro- and nanofabricated devices in his lab from the early developments that lead into the commercialization of the first active control microfluidic device by Caliper Technologies and the follow-on micro- and nanoscale devices with associated commercialization efforts.
△ Less
Submitted 10 January, 2018;
originally announced February 2018.
-
Orbital tomography of hybridized and dispersing molecular overlayers
Authors:
Thomas Ules,
Daniel Lüftner,
Eva Maria Reinisch,
Georg Koller,
Peter Puschnig,
Michael G. Ramsey
Abstract:
With angle resolved photoemission experiments and \emph{ab-initio} electronic structure calculations, the pentacene monolayers on Ag(110) and Cu(110) are compared and contrasted allowing the molecular orientation and an unambiguous assignment of emissions to specific orbitals to be made. On Ag(110), the orbitals remain essentially isolated-molecule like, while strong substrate-enhanced dispersion…
▽ More
With angle resolved photoemission experiments and \emph{ab-initio} electronic structure calculations, the pentacene monolayers on Ag(110) and Cu(110) are compared and contrasted allowing the molecular orientation and an unambiguous assignment of emissions to specific orbitals to be made. On Ag(110), the orbitals remain essentially isolated-molecule like, while strong substrate-enhanced dispersion and orbital modification are observed upon adsorption on Cu(110). We show how the photoemission intensity of extended systems can be simulated and that it behaves essentially like that of the isolated molecule modulated by the band dispersion due to intermolecular interactions.
△ Less
Submitted 19 August, 2015;
originally announced August 2015.
-
Experimental and theoretical electronic structure of quinacridone
Authors:
Daniel Lüftner,
Sivan Refaely-Abramson,
Michael Pachler,
Roland Resel,
Michael G. Ramsey,
Leeor Kronik,
Peter Puschnig
Abstract:
The energy positions of frontier orbitals in organic electronic materials are often studied experimentally by (inverse) photoemission spectroscopy and theoretically within density functional theory. However, standard exchange-correlation functionals often result in too small fundamental gaps, may lead to wrong orbital energy ordering, and do not capture polarization-induced gap renormalization. He…
▽ More
The energy positions of frontier orbitals in organic electronic materials are often studied experimentally by (inverse) photoemission spectroscopy and theoretically within density functional theory. However, standard exchange-correlation functionals often result in too small fundamental gaps, may lead to wrong orbital energy ordering, and do not capture polarization-induced gap renormalization. Here, we examine these issues and a strategy for overcoming them by studying the gas phase and bulk electronic structure of the organic molecule quinacridone (5Q), a promising material with many interesting properties for organic devices. Experimentally, we perform angle-resolved photoemission spectroscopy (ARUPS) on thin films of the crystalline $β$-phase of 5Q. Theoretically, we employ an optimally-tuned range-separated hybrid functional (OT-RSH) within density functional theory. For the gas phase molecule, our OT-RSH result for the ionization potential (IP) represents a substantial improvement over the semi-local PBE and the PBE0 hybrid functional results, producing an IP in quantitative agreement with experiment. For the bulk crystal, we take into account the correct screening in the bulk, using the recently developed OT-SRSH approach, while retaining the optimally-tuned parameters for the range-separation and the short-range Fock exchange. This leads to a band gap narrowing due to polarization effects and results in a valence band spectrum in excellent agreement with experimental ARUPS data, with respect to both peak positions and heights. Finally, full-frequency $G_0W_0$ results based on a hybrid functional starting point are shown to agree with the OT-SRSH approach, improving substantially on the PBE-starting point.
△ Less
Submitted 19 August, 2015;
originally announced August 2015.
-
High-Frequency Microstrip Cross Resonators for Circular Polarization EPR Spectroscopy
Authors:
J. J. Henderson,
C. M. Ramsey,
H. M. Quddusi,
E. del Barco
Abstract:
In this article we discuss the design and implementation of a novel microstrip resonator which allows for the absolute control of the microwaves polarization degree for frequencies up to 30 GHz. The sensor is composed of two half-wavelength microstrip line resonators, designed to match the 50 Ohms impedance of the lines on a high dielectric constant GaAs substrate. The line resonators cross each…
▽ More
In this article we discuss the design and implementation of a novel microstrip resonator which allows for the absolute control of the microwaves polarization degree for frequencies up to 30 GHz. The sensor is composed of two half-wavelength microstrip line resonators, designed to match the 50 Ohms impedance of the lines on a high dielectric constant GaAs substrate. The line resonators cross each other perpendicularly through their centers, forming a cross. Microstrip feed lines are coupled through small gaps to three arms of the cross to connect the resonator to the excitation ports. The control of the relative magnitude and phase between the two microwave stimuli at the input ports of each line allows for tuning the degree and type of polarization of the microwave excitation at the center of the cross resonator. The third (output) port is used to measure the transmitted signal, which is crucial to work at low temperatures, where reflections along lengthy coaxial lines mask the signal reflected by the resonator. EPR spectra recorded at low temperature in an S= 5/2 molecular magnet system show that 82%-fidelity circular polarization of the microwaves is achieved over the central area of the resonator.
△ Less
Submitted 11 August, 2008;
originally announced August 2008.
-
Reply to Wernsdorfer's post: "Correspondence on: Quantum interference of tunnel trajectories between states of different spin lenght in a dimeric molecular nanomagnet"
Authors:
Christopher M. Ramsey,
Enrique del Barco,
Stephen Hill,
Sonali J. Shah,
Christopher C. Beedle,
David N. Hendrickson
Abstract:
We present here an exact version of our response (dated April 27) to Wernsdorfer's correspondence submitted to Nature Physics on March 31, 2008. After consultation with a referee, Nature Physics chose not publish any part of this exchange. We would therefore like to point out that our original study has now been considered favorably by four separate referees chosen by Nature Physics. Unfortunate…
▽ More
We present here an exact version of our response (dated April 27) to Wernsdorfer's correspondence submitted to Nature Physics on March 31, 2008. After consultation with a referee, Nature Physics chose not publish any part of this exchange. We would therefore like to point out that our original study has now been considered favorably by four separate referees chosen by Nature Physics. Unfortunately, Wernsdorfer subsequently posted two further variations of his correspondence on this archive (arXiv:0804.1246v1 and arXiv:0804.1246v2). We note that aspects of the most recent posting (dated after submission of our response) contradict the version submitted to Nature Physics. However, none of the revisions add weight to Wernsdorfer's original correspondence.
△ Less
Submitted 11 June, 2008;
originally announced June 2008.
-
On-chip Integration of High-Frequency Electron Paramagnetic Resonance Spectroscopy and Hall-Effect Magnetometry
Authors:
H. M. Quddusi,
C. M. Ramsey,
J. C. Gonzalez-Pons,
J. J. Henderson,
E. del Barco,
G. de Loubens,
A. D. Kent
Abstract:
A sensor that integrates high sensitivity micro-Hall effect magnetometry and high-frequency electron paramagnetic resonance spectroscopy capabilities on a single semiconductor chip is presented. The Hall-effect magnetometer was fabricated from a two dimensional electron gas GaAs/AlGaAs heterostructure in the form of a cross, with a 50x50 um2 sensing area. A high-frequency microstrip resonator is…
▽ More
A sensor that integrates high sensitivity micro-Hall effect magnetometry and high-frequency electron paramagnetic resonance spectroscopy capabilities on a single semiconductor chip is presented. The Hall-effect magnetometer was fabricated from a two dimensional electron gas GaAs/AlGaAs heterostructure in the form of a cross, with a 50x50 um2 sensing area. A high-frequency microstrip resonator is coupled with two small gaps to a transmission line with a 50 Ohms impedance. Different resonator lengths are used to obtain quasi-TEM fundamental resonant modes in the frequency range 10-30 GHz. The resonator is positioned on top of the active area of the Hall-effect magnetometer, where the magnetic field of the fundamental mode is largest, thus optimizing the conversion of microwave power into magnetic field at the sample position. The two gaps coupling the resonator and transmission lines are engineered differently. The gap to the microwave source is designed to optimize the loaded quality factor of the resonator (Q = 150) while the gap for the transmitted signal is larger. This latter gap minimizes losses and prevents distortion of the resonance while enabling measurement of the transmitted signal. The large filling factor of the resonator permits sensitivities comparable to that of high-quality factor resonant cavities. The integrated sensor enables measurement of the magnetization response of micron scale samples upon application of microwave fields. In particular, the combined measurement of the magnetization change and the microwave power under cw microwave irradiation of single crystal of molecular magnets is used to determine of the energy relaxation time of the molecular spin states. In addition, real time measurements of the magnetization dynamics upon application of fast microwave pulses are demonstrated
△ Less
Submitted 5 May, 2008;
originally announced May 2008.
-
Fabrication of Nano-Gapped Single-Electron Transistors for Transport Studies of Individual Single-Molecule Magnets
Authors:
J. J. Henderson,
C. M. Ramsey,
E. del Barco,
A. Mishra,
G. Christou
Abstract:
Three terminal single-electron transistor devices utilizing Al/Al2O3 gate electrodes were developed for the study of electron transport through individual single-molecule magnets. The devices were patterned via multiple layers of optical and electron beam lithography. Electromigration induced breaking of the nanowires reliably produces 1-3 nm gaps between which the SMM can be situated. Conductan…
▽ More
Three terminal single-electron transistor devices utilizing Al/Al2O3 gate electrodes were developed for the study of electron transport through individual single-molecule magnets. The devices were patterned via multiple layers of optical and electron beam lithography. Electromigration induced breaking of the nanowires reliably produces 1-3 nm gaps between which the SMM can be situated. Conductance through a single Mn12(3-thiophenecarboxylate) displays the coulomb blockade effect with several excitations within +/- 40 meV.
△ Less
Submitted 1 March, 2007;
originally announced March 2007.
-
Phonon-bottleneck enhanced magnetic hysteresis in a molecular paddle wheel complex of Ru$_2^{5+}$
Authors:
L. Chen,
C. M. Ramsey,
N. S. Dalal,
T. Ren,
F. A. Cotton,
W. Wernsdorfer,
I. Chiorescu
Abstract:
The ruthenium based molecular magnet [Ru$_2$(D(3,5-Cl$_2$Ph)F)$_4$Cl(0.5H$_2$O)$\cdotp$C$_6$H$_{14}$] (hereafter Ru$_2$) behaves as a two-level system at sufficiently low temperatures. The authors performed spin detection by means of single-crystal measurements and obtained magnetic hysteresis loops around zero bias as a function of field swee** rate. Compared to other molecular systems, Ru…
▽ More
The ruthenium based molecular magnet [Ru$_2$(D(3,5-Cl$_2$Ph)F)$_4$Cl(0.5H$_2$O)$\cdotp$C$_6$H$_{14}$] (hereafter Ru$_2$) behaves as a two-level system at sufficiently low temperatures. The authors performed spin detection by means of single-crystal measurements and obtained magnetic hysteresis loops around zero bias as a function of field swee** rate. Compared to other molecular systems, Ru$_2$ presents an enhanced irreversibility as shown by ``valleys'' of negative differential susceptibility in the hysteresis curves. Simulations based on phonon bottleneck model are in good qualitative agreement and suggest an abrupt spin reversal combined with insufficient thermal coupling between sample and cryostat phonon bath.
△ Less
Submitted 20 December, 2006;
originally announced December 2006.
-
Correlated Equilibria in Competitive Staff Selection Problem
Authors:
David M. Ramsey,
Krzysztof Szajowski
Abstract:
This paper deals with an extension of the concept of correlated strategies to Markov stop** games. The Nash equilibrium approach to solving nonzero-sum stop** games may give multiple solutions. An arbitrator can suggest to each player the decision to be applied at each stage based on a joint distribution over the players' decisions. This is a form of equilibrium selection. Examples of correl…
▽ More
This paper deals with an extension of the concept of correlated strategies to Markov stop** games. The Nash equilibrium approach to solving nonzero-sum stop** games may give multiple solutions. An arbitrator can suggest to each player the decision to be applied at each stage based on a joint distribution over the players' decisions. This is a form of equilibrium selection. Examples of correlated equilibria in nonzero-sum games related to the staff selection competition in the case of two departments are given. Utilitarian, egalitarian, republican and libertarian concepts of correlated equilibria selection are used.
△ Less
Submitted 12 January, 2006;
originally announced January 2006.
