-
VLT/SPHERE astrometric confirmation and orbital analysis of the brown dwarf companion HR 2562 B
Authors:
A. -L. Maire,
L. Rodet,
C. Lazzoni,
A. Boccaletti,
W. Brandner,
R. Galicher,
F. Cantalloube,
D. Mesa,
H. Klahr,
H. Beust,
G. Chauvin,
S. Desidera,
M. Janson,
M. Keppler,
J. Olofsson,
J. -C. Augereau,
S. Daemgen,
T. Henning,
P. Thébault,
M. Bonnefoy,
M. Feldt,
R. Gratton,
A. -M. Lagrange,
M. Langlois,
M. R. Meyer
, et al. (24 additional authors not shown)
Abstract:
Context. A low-mass brown dwarf has been recently imaged around HR 2562 (HD 50571), a star hosting a debris disk resolved in the far infrared. Interestingly, the companion location is compatible with an orbit coplanar with the disk and interior to the debris belt. This feature makes the system a valuable laboratory to analyze the formation of substellar companions in a circumstellar disk and poten…
▽ More
Context. A low-mass brown dwarf has been recently imaged around HR 2562 (HD 50571), a star hosting a debris disk resolved in the far infrared. Interestingly, the companion location is compatible with an orbit coplanar with the disk and interior to the debris belt. This feature makes the system a valuable laboratory to analyze the formation of substellar companions in a circumstellar disk and potential disk-companion dynamical interactions. Aims. We aim to further characterize the orbital motion of HR 2562 B and its interactions with the host star debris disk. Methods. We performed a monitoring of the system over ~10 months in 2016 and 2017 with the VLT/SPHERE exoplanet imager. Results. We confirm that the companion is comoving with the star and detect for the first time an orbital motion at high significance, with a current orbital motion projected in the plane of the sky of 25 mas (~0.85 au) per year. No orbital curvature is seen in the measurements. An orbital fit of the SPHERE and literature astrometry of the companion without priors on the orbital plane clearly indicates that its orbit is (quasi-)coplanar with the disk. To further constrain the other orbital parameters, we used empirical laws for a companion chaotic zone validated by N-body simulations to test the orbital solutions that are compatible with the estimated disk cavity size. Non-zero eccentricities (>0.15) are allowed for orbital periods shorter than 100 yr, while only moderate eccentricities up to ~0.3 for orbital periods longer than 200 yr are compatible with the disk observations. A comparison of synthetic Herschel images to the real data does not allow us to constrain the upper eccentricity of the companion.
△ Less
Submitted 8 August, 2018; v1 submitted 12 April, 2018;
originally announced April 2018.
-
Testing giant planet formation in the transitional disk of SAO 206462 using deep VLT/SPHERE imaging
Authors:
A. -L. Maire,
T. Stolker,
S. Messina,
A. Müller,
B. A. Biller,
T. Currie,
C. Dominik,
C. A. Grady,
A. Boccaletti,
M. Bonnefoy,
G. Chauvin,
R. Galicher,
M. Millward,
A. Pohl,
W. Brandner,
T. Henning,
A. -M. Lagrange,
M. Langlois,
M. R. Meyer,
S. P. Quanz,
A. Vigan,
A. Zurlo,
R. van Boekel,
E. Buenzli,
T. Buey
, et al. (20 additional authors not shown)
Abstract:
Context. The SAO 206462 (HD 135344B) disk is one of the few known transitional disks showing asymmetric features in scattered light and thermal emission. Near-infrared scattered-light images revealed two bright outer spiral arms and an inner cavity depleted in dust. Giant protoplanets have been proposed to account for the disk morphology. Aims. We aim to search for giant planets responsible for th…
▽ More
Context. The SAO 206462 (HD 135344B) disk is one of the few known transitional disks showing asymmetric features in scattered light and thermal emission. Near-infrared scattered-light images revealed two bright outer spiral arms and an inner cavity depleted in dust. Giant protoplanets have been proposed to account for the disk morphology. Aims. We aim to search for giant planets responsible for the disk features and, in the case of non-detection, to constrain recent planet predictions using the data detection limits. Methods. We obtained new high-contrast and high-resolution total intensity images of the target spanning the Y to the K bands (0.95-2.3 mic) using the VLT/SPHERE near-infrared camera and integral field spectrometer. Results. The spiral arms and the outer cavity edge are revealed at high resolutions and sensitivities without the need for image post-processing techniques, which introduce photometric biases. We do not detect any close-in companions. For the derivation of the detection limits on putative giant planets embedded in the disk, we show that the knowledge of the disk aspect ratio and viscosity is critical for the estimation of the attenuation of a planet signal by the protoplanetary dust because of the gaps that these putative planets may open. Given assumptions on these parameters, the mass limits can vary from ~2-5 to ~4-7 Jupiter masses at separations beyond the disk spiral arms. The SPHERE detection limits are more stringent than those derived from archival NaCo/L' data and provide new constraints on a few recent predictions of massive planets (4-15 MJ) based on the spiral density wave theory. The SPHERE and ALMA data do not favor the hypotheses on massive giant planets in the outer disk (beyond 0.6). There could still be low-mass planets in the outer disk and/or planets inside the cavity.
△ Less
Submitted 3 May, 2017; v1 submitted 16 February, 2017;
originally announced February 2017.
-
Near-infrared wavefront sensing for the VLT interferometer
Authors:
Stefan Hippler,
Wolfgang Brandner,
Yann Clénet,
Felix Hormuth,
Eric Gendron,
Thomas Henning,
Ralf Klein,
Rainer Lenzen,
Daniel Meschke,
Vianak Naranjo,
Udo Neumann,
José Ricardo Ramos,
Ralf-Rainer Rohloff,
Frank Eisenhauer
Abstract:
The very large telescope (VLT) interferometer (VLTI) in its current operating state is equipped with high-order adaptive optics (MACAO) working in the visible spectrum. A low-order near-infrared wavefront sensor (IRIS) is available to measure non-common path tilt aberrations downstream the high-order deformable mirror. For the next generation of VLTI instrumentation, in particular for the design…
▽ More
The very large telescope (VLT) interferometer (VLTI) in its current operating state is equipped with high-order adaptive optics (MACAO) working in the visible spectrum. A low-order near-infrared wavefront sensor (IRIS) is available to measure non-common path tilt aberrations downstream the high-order deformable mirror. For the next generation of VLTI instrumentation, in particular for the designated GRAVITY instrument, we have examined various designs of a four channel high-order near-infrared wavefront sensor. Particular objectives of our study were the specification of the near-infrared detector in combination with a standard wavefront sensing system. In this paper we present the preliminary design of a Shack-Hartmann wavefront sensor operating in the near-infrared wavelength range, which is capable of measuring the wavefronts of four telescopes simultaneously. We further present results of our design study, which aimed at providing a first instrumental concept for GRAVITY.
△ Less
Submitted 12 August, 2008;
originally announced August 2008.
-
GRAVITY: getting to the event horizon of Sgr A*
Authors:
F. Eisenhauer,
G. Perrin,
W. Brandner,
C. Straubmeier,
A. Richichi,
S. Gillessen,
J. P. Berger,
S. Hippler,
A. Eckart,
M. Schoeller,
S. Rabien,
F. Cassaing,
R. Lenzen,
M. Thiel,
Y. Clenet,
J. R. Ramos,
S. Kellner,
P. Fedou,
H. Baumeister,
R. Hofmann,
E. Gendron,
A. Boehm,
H. Bartko,
X. Haubois,
R. Klein
, et al. (23 additional authors not shown)
Abstract:
We present the second-generation VLTI instrument GRAVITY, which currently is in the preliminary design phase. GRAVITY is specifically designed to observe highly relativistic motions of matter close to the event horizon of Sgr A*, the massive black hole at center of the Milky Way. We have identified the key design features needed to achieve this goal and present the resulting instrument concept.…
▽ More
We present the second-generation VLTI instrument GRAVITY, which currently is in the preliminary design phase. GRAVITY is specifically designed to observe highly relativistic motions of matter close to the event horizon of Sgr A*, the massive black hole at center of the Milky Way. We have identified the key design features needed to achieve this goal and present the resulting instrument concept. It includes an integrated optics, 4-telescope, dual feed beam combiner operated in a cryogenic vessel; near infrared wavefront sensing adaptive optics; fringe tracking on secondary sources within the field of view of the VLTI and a novel metrology concept. Simulations show that the planned design matches the scientific needs; in particular that 10 microarcsecond astrometry is feasible for a source with a magnitude of K=15 like Sgr A*, given the availability of suitable phase reference sources.
△ Less
Submitted 1 August, 2008;
originally announced August 2008.
