-
Enhancement of functional properties of V$_{0.6}$Ti$_{0.4}$ alloy superconductor by the addition of yttrium
Authors:
SK. Ramjan,
L. S. Sharath Chandra,
Rashmi Singh,
P. Ganesh,
Archna Sagdeo,
M. K. Chattopadhyay
Abstract:
We show here that the yttrium is immiscible and precipitates with various sizes in the body centred cubic V$_{0.6}$Ti$_{0.4}$ alloy superconductor. The number and size of the precipitates are found to depend on the amount of yttrium added. Precipitates with various sizes up to 30~$μ$m are found in the V$_{0.6}$Ti$_{0.4}$ alloy containing 5 at.\% yttrium. The large amount of line disorders generate…
▽ More
We show here that the yttrium is immiscible and precipitates with various sizes in the body centred cubic V$_{0.6}$Ti$_{0.4}$ alloy superconductor. The number and size of the precipitates are found to depend on the amount of yttrium added. Precipitates with various sizes up to 30~$μ$m are found in the V$_{0.6}$Ti$_{0.4}$ alloy containing 5 at.\% yttrium. The large amount of line disorders generated by the addition of yttrium in this alloy are found to be effective in pinning the magnetic flux lines. While the superconducting transition temperature increases with the increasing amount of yttrium in the V$_{0.6}$Ti$_{0.4}$ alloy, the critical current density is maximum for the alloy containing 2 at. \% yttrium, where it is more than 7.5 times the parent alloy in fields higher than 1~T. We found that the effectiveness of each type of defect in pinning the flux lines is dependent on the temperature and the applied magnetic filed.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Temperature induced first order electronic topological transition in $β$-Ag$_2$Se
Authors:
L. S. Sharath Chandra,
SK. Ramjan,
Soma Banik,
Archna Sagdeo,
M. K. Chattopadhyay
Abstract:
$β$-Ag$_2$Se is a promising material for room temperature thermoelectric applications and magneto-resistive sensors. However, no attention was paid earlier to the hysteresis in the temperature dependence of resistivity ($ρ$($T$)). Here, we show that a broad hysteresis above 35 K is observed not only in $ρ$($T$), but also in other electronic properties such as Hall coefficient ($R_H$($T…
▽ More
$β$-Ag$_2$Se is a promising material for room temperature thermoelectric applications and magneto-resistive sensors. However, no attention was paid earlier to the hysteresis in the temperature dependence of resistivity ($ρ$($T$)). Here, we show that a broad hysteresis above 35 K is observed not only in $ρ$($T$), but also in other electronic properties such as Hall coefficient ($R_H$($T$)), Seebeck coefficient, thermal conductivity and ultraviolet photoelectron spectra (UPS). We also show that the hysteresis is not associated with a structural transition. The $ρ$($T$) and $R_H$($T$) show that $β$-Ag$_2$Se is semiconducting above 300 K, but metallicity is retained below 300 K. While electronic states are absent in the energy range from the Fermi level ($E_F$) to 0.4 eV below the $E_F$ at 300 K, a distinct Fermi edge is observed in the UPS at 15 K suggesting that the $β$-Ag$_2$Se undergoes an electronic topological transition from a high temperature semiconducting state to a low temperature metallic state. Our study reveals that a constant and moderately high thermoelectric figure of merit ($ZT$) in the range 300-395 K is observed due to the broad semiconductor to metal transition in $β$-Ag$_2$Se.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
Strong paramagnetic response in Y containing V$_{0.6}$Ti$_{0.4}$ superconductor
Authors:
SK Ramjan,
LS Sharath Chandra,
Rashmi Singh,
MK Chattopadhyay
Abstract:
We report here, the systematic field-cooled (FC) magnetisation of superconducting (V$_{0.6}$Ti$_{0.4}$)-Y alloys in presence of applied magnetic fields upto 7 T. Paramagnetic response is clearly observed just below the superconducting transition temperature (T$_{c}$) in low fields ($\leq$0.2 T). The lower T$_{c}$ of the Y-rich precipitates as compared to the bulk, is the origin of flux compression…
▽ More
We report here, the systematic field-cooled (FC) magnetisation of superconducting (V$_{0.6}$Ti$_{0.4}$)-Y alloys in presence of applied magnetic fields upto 7 T. Paramagnetic response is clearly observed just below the superconducting transition temperature (T$_{c}$) in low fields ($\leq$0.2 T). The lower T$_{c}$ of the Y-rich precipitates as compared to the bulk, is the origin of flux compression and this leads to paramagnetic response. It is also observed that the magnetisation obtained during field cooled (FC) cooling cycle is lower than that of FC warming, for all the alloys in the field range 0.02-7 T. In addition, paramagnetic relaxation of FC moment is observed. We identify that these features of Y containing alloys are related to the high field paramagnetic Meissner effect (HFPME). Our analysis shows that the large difference in pinning strength of the different pinning centres generated due to Y addition to V$_{0.6}$Ti$_{0.4}$ alloy, is responsible for the observed effect. We provide further evidence to our claim in the form of extension of range in temperature and magnetic fields over which HFPME is observed when samples are subjected to cold work.
△ Less
Submitted 13 October, 2021; v1 submitted 12 October, 2021;
originally announced October 2021.
-
Coexisting superconductivity and ferromagnetism in the (V$_{0.60}$Ti$_{0.40}$)-Gd alloys
Authors:
Sabyasachi Paul,
SK. Ramjan,
L. S. Sharath Chandra,
M. K. Chattopadhyay
Abstract:
We present here, the effect of microstructure on the magnetic, electrical and thermal properties of (V$_{0.60}$Ti$_{0.40}$)-Gd alloys. The gadolinium is found to be immiscible and precipitates with a size $<$1.2~$μ$m in the (V$_{0.60}$Ti$_{0.40}$)-Gd alloys. These precipitates enhance the grain boundary density. The (V$_{0.60}$Ti$_{0.40}$)-Gd alloys become ferromagnetic below $T_{mc}$ = 295~K with…
▽ More
We present here, the effect of microstructure on the magnetic, electrical and thermal properties of (V$_{0.60}$Ti$_{0.40}$)-Gd alloys. The gadolinium is found to be immiscible and precipitates with a size $<$1.2~$μ$m in the (V$_{0.60}$Ti$_{0.40}$)-Gd alloys. These precipitates enhance the grain boundary density. The (V$_{0.60}$Ti$_{0.40}$)-Gd alloys become ferromagnetic below $T_{mc}$ = 295~K with an increase in the superconducting transition temperature ($T_{sc}$). Though the disorder increases with increasing Gd content, the electronic thermal conductivity ($κ_{e} (H = 0)$) reduces by at most 15\% which is in contrast with the 80\% decrease of the phononic thermal conductivity ($κ_{l} (H = 0)$). Our analysis suggests that the magnetic moments of Gd precipitates polarize the conduction electrons along and around the grain boundaries leading to increase in the mean free path of the electrons. The partial suppression of spin fluctuations in the (V$_{0.60}$Ti$_{0.40}$)-Gd alloy by the conduction electron polarization enhances the $T_{sc}$.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Studies on DC transport and terahertz conductivity of granular molybdenum thin films for microwave radiation detector applications
Authors:
Shilpam Sharma,
Ashish Khandelwal,
E. P. Amaladass,
S. Abhirami,
SK. Ramjan,
J. Jayabalan,
Awadhesh Mani,
M. K. Chattopadhyay
Abstract:
The morphological, transport and terahertz optical properties of DC magnetron sputtered granular molybdenum thin-films with nano-grains embedded in an amorphous matrix have been studied in the normal and superconducting states. The superconducting transition temperatures of these films are much higher than that of bulk molybdenum. The optical properties of these thin-films have been studied using…
▽ More
The morphological, transport and terahertz optical properties of DC magnetron sputtered granular molybdenum thin-films with nano-grains embedded in an amorphous matrix have been studied in the normal and superconducting states. The superconducting transition temperatures of these films are much higher than that of bulk molybdenum. The optical properties of these thin-films have been studied using terahertz time-domain spectroscopy. Their properties have been compared with the existing materials used for the development of radiation detectors. The resistivity of the films lies in >100 micro-Ohm-cm range which is ideal for making highly sensitive radiation detectors. The Hall measurements indicate the presence of holes as the dominant carriers with very small mean free path and mobility. In the normal state, the films are disordered bad metal but they have large superfluid density and stiffness in their superconducting state. The normal state and superconducting properties of the films are very promising for their use in cryogenic radiation detectors for microwave, terahertz, and far IR frequency ranges.
△ Less
Submitted 22 October, 2020; v1 submitted 26 July, 2020;
originally announced July 2020.
-
Localization of electronic states resulting from electronic topological transitions in the Mo$_{1-x}$Re$_x$ alloys: A photoemission study
Authors:
L. S. Sharath Chandra,
Shyam Sundar,
Soma Banik,
SK. Ramjan,
M. K. Chattopadhyay,
S. N. Jha,
S. B. Roy
Abstract:
We present the results of resonant photoemission spectroscopy experiments on the Mo$_{1-x}$Re$_{x}$ alloy compositions spanning over two electronic topological transitions (ETT) at the critical concentrations $x_{C1}$ = 0.05 and $x_{C2}$ = 0.11. The photoelectrons show an additional resonance ($R3$) in the constant initial state (CIS) spectra of the alloys along with two resonances ($R1$ and $R2$)…
▽ More
We present the results of resonant photoemission spectroscopy experiments on the Mo$_{1-x}$Re$_{x}$ alloy compositions spanning over two electronic topological transitions (ETT) at the critical concentrations $x_{C1}$ = 0.05 and $x_{C2}$ = 0.11. The photoelectrons show an additional resonance ($R3$) in the constant initial state (CIS) spectra of the alloys along with two resonances ($R1$ and $R2$) which are similar to those observed in molybdenum. All the resonances show Fano-like line shapes. The asymmetry parameter $q$ of the resonances $R1$ and $R3$ of the alloys is observed to be large and negative. Our analysis suggests that the origin of large negative q is associated with phonon assisted inter band scattering between the Mo-like states and the narrow band that appeared due to the ETT.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
Grain refinement and enhancement of critical current density in the V_0.60Ti_0.40 alloy superconductors with Gd addition
Authors:
Sabyasachi Paul,
SK Ramjan,
R Venkatesh,
L S Sharath Chandra,
M K Chattopadhyay
Abstract:
The V-Ti alloys are promising materials as alternate to the commercial Nb-based superconductors for high current-high magnetic field applications. However, the critical current density (J_c) of these alloys are somewhat low due to their low grain-boundary density. We show here that grain refinement of the V-Ti alloys and enhancement of the J_c can be achieved by the addition of Gd into the system,…
▽ More
The V-Ti alloys are promising materials as alternate to the commercial Nb-based superconductors for high current-high magnetic field applications. However, the critical current density (J_c) of these alloys are somewhat low due to their low grain-boundary density. We show here that grain refinement of the V-Ti alloys and enhancement of the J_c can be achieved by the addition of Gd into the system, which precipitates as clusters along the grain boundaries. Both the J_c and the pinning force density (F_P) increase with the increasing Gd content up to 1 at. % Gd, where they are more than 20 times higher than those of the parent V_0.60Ti_0.40 alloy. Introduction of Gd into the system also leads to ferromagnetic (FM) correlations, and the alloys containing more than 0.5 at. % Gd exhibit spontaneous magnetization. In spite of the FM correlations, the superconducting transition temperature increases slightly with Gd-addition.
△ Less
Submitted 4 November, 2020; v1 submitted 10 December, 2019;
originally announced December 2019.